sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 36857dea695f

+==============================================================================+
| ipsvd 1.0.0-3.1 (armhf)                      Mon, 04 Mar 2019 14:28:10 +0000 |
+==============================================================================+

Package: ipsvd
Version: 1.0.0-3.1
Source Version: 1.0.0-3.1
Distribution: unstable-amd64-sbuild
Machine Architecture: amd64
Host Architecture: armhf
Build Architecture: amd64
Build Profiles: cross nocheck
Build Type: any

I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-2171deda-1434-4b40-a0d7-1d5a50fbe0a0' with '<<CHROOT>>'
I: NOTICE: Log filtering will replace 'build/ipsvd-mQSnWH/resolver-vAkbOD' with '<<RESOLVERDIR>>'

+------------------------------------------------------------------------------+
| Update chroot                                                                |
+------------------------------------------------------------------------------+

Hit:1 http://10.116.41.102/debian sid InRelease
Hit:2 http://cdn-fastly.deb.debian.org/debian sid InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl libmailtools-perl
  libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

+------------------------------------------------------------------------------+
| Fetch source files                                                           |
+------------------------------------------------------------------------------+


Local sources
-------------

/home/build/sbuild-setup/repo/pool/main/i/ipsvd/ipsvd_1.0.0-3.1.dsc exists in /home/build/sbuild-setup/repo/pool/main/i/ipsvd; copying to chroot
I: NOTICE: Log filtering will replace 'build/ipsvd-mQSnWH/ipsvd-1.0.0' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/ipsvd-mQSnWH' with '<<BUILDDIR>>'

+------------------------------------------------------------------------------+
| Install package build dependencies                                           |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf
Filtered Build-Depends: build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [957 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [379 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [467 B]
Fetched 1803 B in 0s (139 kB/s)
Reading package lists...
Reading package lists...

Install main build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl libmailtools-perl
  libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
  gcc-8-base:armhf libasan5:armhf libatomic1:armhf libc6:armhf libc6-dev:armhf
  libgcc-8-dev:armhf libgcc1:armhf libgomp1:armhf libstdc++-8-dev:armhf
  libstdc++6:armhf libubsan1:armhf linux-libc-dev:armhf
Suggested packages:
  glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf
  libstdc++-8-doc:armhf
Recommended packages:
  libidn2-0:armhf
The following NEW packages will be installed:
  gcc-8-base:armhf libasan5:armhf libatomic1:armhf libc6:armhf libc6-dev:armhf
  libgcc-8-dev:armhf libgcc1:armhf libgomp1:armhf libstdc++-8-dev:armhf
  libstdc++6:armhf libubsan1:armhf linux-libc-dev:armhf
  sbuild-build-depends-main-dummy:armhf
0 upgraded, 13 newly installed, 0 to remove and 0 not upgraded.
Need to get 888 B/8934 kB of archives.
After this operation, 49.8 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [888 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 888 B in 0s (0 B/s)
Selecting previously unselected package gcc-8-base:armhf.
(Reading database ... 16440 files and directories currently installed.)
Preparing to unpack .../00-gcc-8-base_8.3.0-2_armhf.deb ...
Unpacking gcc-8-base:armhf (8.3.0-2) ...
Selecting previously unselected package libgcc1:armhf.
Preparing to unpack .../01-libgcc1_1%3a8.3.0-2_armhf.deb ...
Unpacking libgcc1:armhf (1:8.3.0-2) ...
Selecting previously unselected package libc6:armhf.
Preparing to unpack .../02-libc6_2.28-7_armhf.deb ...
Unpacking libc6:armhf (2.28-7) ...
Selecting previously unselected package libstdc++6:armhf.
Preparing to unpack .../03-libstdc++6_8.3.0-2_armhf.deb ...
Unpacking libstdc++6:armhf (8.3.0-2) ...
Selecting previously unselected package libasan5:armhf.
Preparing to unpack .../04-libasan5_8.3.0-2_armhf.deb ...
Unpacking libasan5:armhf (8.3.0-2) ...
Selecting previously unselected package libatomic1:armhf.
Preparing to unpack .../05-libatomic1_8.3.0-2_armhf.deb ...
Unpacking libatomic1:armhf (8.3.0-2) ...
Selecting previously unselected package linux-libc-dev:armhf.
Preparing to unpack .../06-linux-libc-dev_4.19.20-1_armhf.deb ...
Unpacking linux-libc-dev:armhf (4.19.20-1) ...
Selecting previously unselected package libc6-dev:armhf.
Preparing to unpack .../07-libc6-dev_2.28-7_armhf.deb ...
Unpacking libc6-dev:armhf (2.28-7) ...
Selecting previously unselected package libgomp1:armhf.
Preparing to unpack .../08-libgomp1_8.3.0-2_armhf.deb ...
Unpacking libgomp1:armhf (8.3.0-2) ...
Selecting previously unselected package libubsan1:armhf.
Preparing to unpack .../09-libubsan1_8.3.0-2_armhf.deb ...
Unpacking libubsan1:armhf (8.3.0-2) ...
Selecting previously unselected package libgcc-8-dev:armhf.
Preparing to unpack .../10-libgcc-8-dev_8.3.0-2_armhf.deb ...
Unpacking libgcc-8-dev:armhf (8.3.0-2) ...
Selecting previously unselected package libstdc++-8-dev:armhf.
Preparing to unpack .../11-libstdc++-8-dev_8.3.0-2_armhf.deb ...
Unpacking libstdc++-8-dev:armhf (8.3.0-2) ...
Selecting previously unselected package sbuild-build-depends-main-dummy:armhf.
Preparing to unpack .../12-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Setting up linux-libc-dev:armhf (4.19.20-1) ...
Setting up gcc-8-base:armhf (8.3.0-2) ...
Setting up libgcc1:armhf (1:8.3.0-2) ...
Setting up libc6:armhf (2.28-7) ...
Setting up libc6-dev:armhf (2.28-7) ...
Setting up libstdc++6:armhf (8.3.0-2) ...
Setting up libgomp1:armhf (8.3.0-2) ...
Setting up libasan5:armhf (8.3.0-2) ...
Setting up libatomic1:armhf (8.3.0-2) ...
Setting up libubsan1:armhf (8.3.0-2) ...
Setting up libgcc-8-dev:armhf (8.3.0-2) ...
Setting up libstdc++-8-dev:armhf (8.3.0-2) ...
Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Processing triggers for libc-bin (2.28-7) ...
Processing triggers for ccache (3.6-1) ...
Updating symlinks in /usr/lib/ccache ...

+------------------------------------------------------------------------------+
| Check architectures                                                          |
+------------------------------------------------------------------------------+

Initial Foreign Architectures: armhf 
Arch check ok (armhf included in any)

+------------------------------------------------------------------------------+
| Build environment                                                            |
+------------------------------------------------------------------------------+

Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64)
Toolchain package versions: binutils_2.31.1-14 dpkg-dev_1.19.5 g++-8_8.3.0-2 gcc-8_8.3.0-2 libc6-dev_2.28-7 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.2.0-20cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.2.0-20cross1 linux-libc-dev_4.19.20-1
Package versions: adduser_3.118 apt_1.8.0~rc4 base-files_10.1 base-passwd_3.5.46 bash_5.0-2 binutils_2.31.1-14 binutils-arm-linux-gnueabihf_2.31.1-14 binutils-common_2.31.1-14 binutils-x86-64-linux-gnu_2.31.1-14 bsdutils_1:2.33.1-0.1 build-essential_12.5 bzip2_1.0.6-9 ca-certificates_20190110 ccache_3.6-1 coreutils_8.30-2 cpp_4:8.2.0-2 cpp-8_8.3.0-2 cpp-8-arm-linux-gnueabihf_8.2.0-20cross1 cpp-arm-linux-gnueabihf_4:8.2.0-2 cross-config_2.6.15-2 crossbuild-essential-armhf_12.5 dash_0.5.10.2-5 debconf_1.5.71 debian-archive-keyring_2018.1 debianutils_4.8.6.1 diffutils_1:3.7-2 dirmngr_2.2.12-1 dpkg_1.19.5 dpkg-cross_2.6.15-2 dpkg-dev_1.19.5 e2fsprogs_1.44.5-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-2 findutils_4.6.0+git+20190209-2 g++_4:8.2.0-2 g++-8_8.3.0-2 g++-8-arm-linux-gnueabihf_8.2.0-20cross1 g++-arm-linux-gnueabihf_4:8.2.0-2 gcc_4:8.2.0-2 gcc-8_8.3.0-2 gcc-8-arm-linux-gnueabihf_8.2.0-20cross1 gcc-8-arm-linux-gnueabihf-base_8.2.0-20cross1 gcc-8-base_8.3.0-2 gcc-8-cross-base_8.2.0-20cross1 gcc-arm-linux-gnueabihf_4:8.2.0-2 gnupg_2.2.12-1 gnupg-l10n_2.2.12-1 gnupg-utils_2.2.12-1 gpg_2.2.12-1 gpg-agent_2.2.12-1 gpg-wks-client_2.2.12-1 gpg-wks-server_2.2.12-1 gpgconf_2.2.12-1 gpgsm_2.2.12-1 gpgv_2.2.12-1 grep_3.3-1 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 libacl1_2.2.52-5 libapt-pkg5.0_1.8.0~rc4 libasan5_8.3.0-2 libasan5-armhf-cross_8.2.0-20cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-2 libatomic1-armhf-cross_8.2.0-20cross1 libattr1_1:2.4.47-4 libaudit-common_1:2.8.4-2 libaudit1_1:2.8.4-2 libauthen-sasl-perl_2.1600-1 libbinutils_2.31.1-14 libblkid1_2.33.1-0.1 libbz2-1.0_1.0.6-9 libc-bin_2.28-7 libc-dev-bin_2.28-7 libc6_2.28-7 libc6-armhf-cross_2.28-4cross1 libc6-dev_2.28-7 libc6-dev-armhf-cross_2.28-4cross1 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-2 libcom-err2_1.44.5-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libdata-dump-perl_1.23-1 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.247 libdebian-dpkgcross-perl_2.6.15-2 libdpkg-perl_1.19.5 libeatmydata1_105-7 libencode-locale-perl_1.05-1 libexpat1_2.2.6-1 libext2fs2_1.44.5-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-listing-perl_6.04-1 libfile-which-perl_1.23-1 libfont-afm-perl_1.20-2 libgcc-8-dev_8.3.0-2 libgcc-8-dev-armhf-cross_8.2.0-20cross1 libgcc1_1:8.3.0-2 libgcc1-armhf-cross_1:8.2.0-20cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-3 libgdbm6_1.18.1-3 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.6-2 libgomp1_8.3.0-2 libgomp1-armhf-cross_8.2.0-20cross1 libgpg-error0_1.35-1 libhogweed4_3.4.1-1 libhtml-form-perl_6.03-1 libhtml-format-perl_2.12-1 libhtml-parser-perl_3.72-3+b3 libhtml-tagset-perl_3.20-3 libhtml-tree-perl_5.07-2 libhttp-cookies-perl_6.04-1 libhttp-daemon-perl_6.01-1 libhttp-date-perl_6.02-1 libhttp-message-perl_6.18-1 libhttp-negotiate-perl_6.01-1 libicu63_63.1-6 libidn2-0_2.0.5-1 libio-html-perl_1.001-1 libio-socket-ssl-perl_2.060-3 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_8.3.0-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-2 liblwp-mediatypes-perl_6.02-1 liblwp-protocol-https-perl_6.07-2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-2 libmagic1_1:5.35-2 libmailtools-perl_2.18-1 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libmpx2_8.3.0-2 libncursesw6_6.1+20181013-2 libnet-http-perl_6.18-1 libnet-smtp-ssl-perl_1.04-1 libnet-ssleay-perl_1.85-2+b1 libnettle6_3.4.1-1 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre3_2:8.39-11 libperl5.28_5.28.1-4 libquadmath0_8.3.0-2 libreadline7_7.0-5 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-1 libss2_1.44.5-1 libssl1.1_1.1.1b-1 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.2.0-20cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.2.0-20cross1 libsystemd0_241-1 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20181013-2 libtry-tiny-perl_0.30-1 libtsan0_8.3.0-2 libubsan1_8.3.0-2 libubsan1-armhf-cross_8.2.0-20cross1 libudev1_241-1 libunistring2_0.9.10-1 liburi-perl_1.76-1 libuuid1_2.33.1-0.1 libwww-perl_6.36-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-parser-perl_2.44-3 libxml-sax-base-perl_1.09-1 libxml-sax-expat-perl_0.51-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libyaml-0-2_0.2.1-1 libyaml-libyaml-perl_0.76+repack-1 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.20-1 linux-libc-dev-armhf-cross_4.19.13-1cross1 login_1:4.5-1.1 lsb-base_10.2018112800 make_4.2.1-1.2 mawk_1.3.3-17+b3 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 netbase_5.6 openssl_1.1.1b-1 passwd_1:4.5-1.1 patch_2.7.6-3 perl_5.28.1-4 perl-base_5.28.1-4 perl-modules-5.28_5.28.1-4 perl-openssl-defaults_3 pinentry-curses_1.1.0-1+b1 readline-common_7.0-5 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-5 tzdata_2018i-1 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-runtime_2.33.1-0.1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1

+------------------------------------------------------------------------------+
| Build                                                                        |
+------------------------------------------------------------------------------+


Unpack source
-------------

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.0
Source: ipsvd
Binary: ipsvd
Architecture: any
Version: 1.0.0-3.1
Maintainer: Gerrit Pape <pape@smarden.org>
Standards-Version: 3.9.2.0
Vcs-Git: http://smarden.org/git/ipsvd.git/
Package-List:
 ipsvd deb net optional arch=any
Checksums-Sha1:
 1762c0e756adc46ff8f69bacc3a57943d08add35 77903 ipsvd_1.0.0.orig.tar.gz
 29b754f1cd772a4eddc0e9962e8215fece332f00 5350 ipsvd_1.0.0-3.1.diff.gz
Checksums-Sha256:
 ef7a725bc85acb5d09ab57658385bb470b3e4da5a4ffc88b5da6c6bd37d01fad 77903 ipsvd_1.0.0.orig.tar.gz
 c14e191974c9f4fd7672969f069fa8d19f744b2ff1da4c702c776cc44d2e9882 5350 ipsvd_1.0.0-3.1.diff.gz
Files:
 82c8710e4beec3e92f3d9a616290232b 77903 ipsvd_1.0.0.orig.tar.gz
 c1a047509fd680203ebfd5e4aad6818d 5350 ipsvd_1.0.0-3.1.diff.gz

-----BEGIN PGP SIGNATURE-----
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=KOn5
-----END PGP SIGNATURE-----

gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error
gpgv: Signature made Thu Sep 28 08:56:21 2017 UTC
gpgv:                using RSA key C2FE4BD271C139B86C533E461E953E27D4311E58
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./ipsvd_1.0.0-3.1.dsc
dpkg-source: info: extracting ipsvd in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking ipsvd_1.0.0.orig.tar.gz
dpkg-source: info: applying ipsvd_1.0.0-3.1.diff.gz

Check disk space
----------------

Sufficient free space for build

User Environment
----------------

APT_CONFIG=/var/lib/sbuild/apt.conf
CCACHE_COMPRESS=1
CCACHE_DIR=/var/cache/ccache-sbuild
CCACHE_UMASK=002
CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf
DEB_BUILD_OPTIONS=nocheck
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LD_LIBRARY_PATH=/usr/lib/libeatmydata
LD_PRELOAD=libeatmydata.so
LOGNAME=build
PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/<<PKGBUILDDIR>>
SCHROOT_ALIAS_NAME=unstable-amd64-sbuild
SCHROOT_CHROOT_NAME=unstable-amd64-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=1000
SCHROOT_GROUP=build
SCHROOT_SESSION_ID=unstable-amd64-sbuild-2171deda-1434-4b40-a0d7-1d5a50fbe0a0
SCHROOT_UID=1000
SCHROOT_USER=build
SHELL=/bin/sh
USER=build

dpkg-buildpackage
-----------------

Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16
dpkg-buildpackage: info: source package ipsvd
dpkg-buildpackage: info: source version 1.0.0-3.1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Chris Lamb <lamby@debian.org>
dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
 dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
 fakeroot debian/rules clean
rm -rf ipsvd/compile ipsvd/command
test ! -e patch-stamp || \
  for i in `ls -1r debian/diff/*.diff || :`; do patch -p1 -R <$i; done
rm -f patch-stamp build-stamp
rm -rf '/<<PKGBUILDDIR>>/debian/ipsvd'
rm -f debian/files debian/substvars changelog
test ! -r conf-cc'{orig}' || mv -f conf-cc'{orig}' ipsvd/src/conf-cc
test ! -r conf-ld'{orig}' || mv -f conf-ld'{orig}' ipsvd/src/conf-ld
rm -f ipsvd
dpkg-buildpackage: warning: debian/rules must be updated to support the 'build-arch' and 'build-indep' targets (at least 'build-arch' seems to be missing)
 debian/rules build
for i in `ls -1 debian/diff/*.diff || :`; do \
  patch -p1 <$i || exit 1; \
done
ls: cannot access 'debian/diff/*.diff': No such file or directory
touch patch-stamp
gcc -v
Using built-in specs.
COLLECT_GCC=/usr/bin/gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/8/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian 8.3.0-2' --with-bugurl=file:///usr/share/doc/gcc-8/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --prefix=/usr --with-gcc-major-version-only --program-suffix=-8 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib --enable-objc-gc=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 8.3.0 (Debian 8.3.0-2) 
test -e ipsvd || ln -s ipsvd-1.0.0 ipsvd
test -r conf-cc'{orig}' || cp -f ipsvd/src/conf-cc conf-cc'{orig}'
echo 'gcc -g -O2 -Wall' >ipsvd/src/conf-cc
test -r conf-ld'{orig}' || cp -f ipsvd/src/conf-ld conf-ld'{orig}'
echo 'gcc -Os' >ipsvd/src/conf-ld
(cd ipsvd/ && package/compile && package/check)
Linking ./src/* into ./compile...
Compiling everything in ./compile...
+ cd compile
+ exec make
make[1]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.
make[1]: Entering directory '/<<PKGBUILDDIR>>/ipsvd-1.0.0/compile'
( (test ! -r matrixssl.tar.gz && echo nossl) || \
  echo sslio sslsvd) >command.sslcheck
mv -f command.sslcheck command.ssl
sh find-systype.sh >systype
rm -f load
sh print-ld.sh >load
chmod 555 load
rm -f compile
sh print-cc.sh >compile
chmod 555 compile
rm -f choose
cat warn-auto.sh choose.sh >choose
chmod 555 choose
./choose c trydrent direntry.h1 direntry.h2 >direntry.h
./choose cl tryflock hasflock.h1 hasflock.h2 >hasflock.h
./choose cl trymkffo hasmkffo.h1 hasmkffo.h2 >hasmkffo.h
./choose cl trysgact hassgact.h1 hassgact.h2 >hassgact.h
./choose cl trysgprm hassgprm.h1 hassgprm.h2 >hassgprm.h
./compile chkshsgr.c
chkshsgr.c: In function ‘main’:
chkshsgr.c:10:19: warning: passing argument 2 of ‘getgroups’ from incompatible pointer type [-Wincompatible-pointer-types]
   if (getgroups(1,x) == 0) if (setgroups(1,x) == -1) _exit(1);
                   ^
In file included from chkshsgr.c:3:
/usr/include/unistd.h:689:43: note: expected ‘__gid_t *’ {aka ‘unsigned int *’} but argument is of type ‘short int *’
 extern int getgroups (int __size, __gid_t __list[]) __THROW __wur;
                                   ~~~~~~~~^~~~~~~~
chkshsgr.c:10:32: warning: implicit declaration of function ‘setgroups’; did you mean ‘getgroups’? [-Wimplicit-function-declaration]
   if (getgroups(1,x) == 0) if (setgroups(1,x) == -1) _exit(1);
                                ^~~~~~~~~
                                getgroups
./load chkshsgr
./chkshsgr || (cat warn-shsgr; exit 1)
./choose clr tryshsgr hasshsgr.h1 hasshsgr.h2 >hasshsgr.h
./choose cl trywaitp haswaitp.h1 haswaitp.h2 >haswaitp.h
./choose clr trypoll iopause.h1 iopause.h2 >iopause.h
./choose c trysysel select.h1 select.h2 >select.h
./choose clr tryulong64 uint64.h1 uint64.h2 >uint64.h
( (./compile tryulong32.c && ./load tryulong32 && \
./tryulong32) >/dev/null 2>&1 \
&& cat uint32.h2 || cat uint32.h1) >uint32.h
rm -f tryulong32.o tryulong32
./compile trysocketlib.c
(./load trysocketlib >/dev/null 2>&1 || \
  (./load trysocketlib -lxnet >/dev/null 2>&1 && echo '-lxnet') || \
  (./load trysocketlib -lsocket -lnsl >/dev/null 2>&1 && \
    echo '-lsocket -lnsl') ) >socket.lib
rm -f trysocketlib.o trysocketlib
rm -f sysdeps
cat systype compile load socket.lib >>sysdeps
grep sysdep direntry.h >>sysdeps
grep sysdep haswaitp.h >>sysdeps
grep sysdep hassgact.h >>sysdeps
grep sysdep hassgprm.h >>sysdeps
grep sysdep select.h >>sysdeps
grep sysdep uint64.h >>sysdeps
grep sysdep iopause.h >>sysdeps
grep sysdep hasmkffo.h >>sysdeps
grep sysdep hasflock.h >>sysdeps
grep sysdep hasshsgr.h >>sysdeps
cat sysdeps
linux-3.16.0-4-amd64-:-:-:genuineintel-000406f1-bfebfbff-:-
#!/bin/sh
# WARNING: This file was auto-generated. Do not edit!
exec gcc -g -O2 -Wall -c ${1+"$@"}
#!/bin/sh
# WARNING: This file was auto-generated. Do not edit!
main="$1"; shift
exec gcc -Os -o "$main" "$main".o ${1+"$@"}
/* sysdep: +dirent */
/* sysdep: +waitpid */
/* sysdep: +sigaction */
/* sysdep: +sigprocmask */
/* sysdep: +sysselect */
/* sysdep: +ulong64 */
/* sysdep: +poll */
/* sysdep: +mkfifo */
/* sysdep: +flock */
/* sysdep: -shortsetgroups */
./compile tcpsvd.c
tcpsvd.c: In function ‘connection_accept’:
tcpsvd.c:171:48: warning: pointer targets in passing argument 3 of ‘getsockname’ differ in signedness [-Wpointer-sign]
   if (getsockname(c, (struct sockaddr*)&socka, &socka_size) == -1)
                                                ^~~~~~~~~~~
In file included from tcpsvd.c:2:
/usr/include/x86_64-linux-gnu/sys/socket.h:116:12: note: expected ‘socklen_t * restrict’ {aka ‘unsigned int * restrict’} but argument is of type ‘int *’
 extern int getsockname (int __fd, __SOCKADDR_ARG __addr,
            ^~~~~~~~~~~
tcpsvd.c: In function ‘main’:
tcpsvd.c:390:9: warning: implicit declaration of function ‘setgroups’; did you mean ‘getgroups’? [-Wimplicit-function-declaration]
     if (setgroups(ugid.gids, ugid.gid) == -1) fatal("unable to set groups");
         ^~~~~~~~~
         getgroups
tcpsvd.c:416:48: warning: pointer targets in passing argument 3 of ‘accept’ differ in signedness [-Wpointer-sign]
     conn =accept(s, (struct sockaddr *)&socka, &socka_size);
                                                ^~~~~~~~~~~
In file included from tcpsvd.c:2:
/usr/include/x86_64-linux-gnu/sys/socket.h:232:12: note: expected ‘socklen_t * restrict’ {aka ‘unsigned int * restrict’} but argument is of type ‘int *’
 extern int accept (int __fd, __SOCKADDR_ARG __addr,
            ^~~~~~
./compile ipsvd_log.c
./compile ipsvd_fmt.c
ipsvd_fmt.c: In function ‘ipsvd_fmt_ip’:
ipsvd_fmt.c:10:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
   if (p) p +=i; if (p) *p++ ='.';
   ^~
ipsvd_fmt.c:10:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
   if (p) p +=i; if (p) *p++ ='.';
                 ^~
ipsvd_fmt.c:12:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
   if (p) p +=i; if (p) *p++ ='.';
   ^~
ipsvd_fmt.c:12:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
   if (p) p +=i; if (p) *p++ ='.';
                 ^~
ipsvd_fmt.c:14:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
   if (p) p +=i; if (p) *p++ ='.';
   ^~
ipsvd_fmt.c:14:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
   if (p) p +=i; if (p) *p++ ='.';
                 ^~
./compile ipsvd_check.c
./compile ipsvd_hostname.c
./compile ipsvd_phcc.c
./compile ipsvd_scan.c
./compile uidgid.c
rm -f makelib
sh print-ar.sh >makelib
chmod 555 makelib
./compile cdb.c
./compile cdb_hash.c
./compile cdb_make.c
cdb_make.c: In function ‘cdb_make_start’:
cdb_make.c:18:21: warning: passing argument 2 of ‘buffer_init’ from incompatible pointer type [-Wincompatible-pointer-types]
   buffer_init(&c->b,write,fd,c->bspace,sizeof c->bspace);
                     ^~~~~
In file included from cdb_make.h:6,
                 from cdb_make.c:8:
buffer.h:18:34: note: expected ‘int (*)()’ but argument is of type ‘ssize_t (*)(int,  const void *, size_t)’ {aka ‘long int (*)(int,  const void *, long unsigned int)’}
 extern void buffer_init(buffer *,int (*)(),int,char *,unsigned int);
                                  ^~~~~~~~~
./compile uint32_pack.c
./compile uint32_unpack.c
./makelib cdb.a cdb.o cdb_hash.o cdb_make.o uint32_pack.o \
  uint32_unpack.o
./compile dns_dfd.c
./compile dns_domain.c
dns_domain.c: In function ‘dns_domain_length’:
dns_domain.c:13:10: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
   while (c = *x++)
          ^
./compile dns_dtda.c
./compile dns_ip.c
./compile dns_ipq.c
./compile dns_mx.c
./compile dns_name.c
./compile dns_nd.c
./compile dns_packet.c
dns_packet.c: In function ‘dns_packet_getname’:
dns_packet.c:46:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (pos >= len) goto PROTO; ch = buf[pos++];
     ^~
dns_packet.c:46:33: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (pos >= len) goto PROTO; ch = buf[pos++];
                                 ^~
dns_packet.c:50:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
       if (namelen + 1 > sizeof name) goto PROTO; name[namelen++] = ch;
       ^~
dns_packet.c:50:50: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
       if (namelen + 1 > sizeof name) goto PROTO; name[namelen++] = ch;
                                                  ^~~~
dns_packet.c:56:9: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
         if (pos >= len) goto PROTO; ch = buf[pos++];
         ^~
dns_packet.c:56:37: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
         if (pos >= len) goto PROTO; ch = buf[pos++];
                                     ^~
dns_packet.c:59:9: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
         if (pos >= len) goto PROTO; ch = buf[pos++];
         ^~
dns_packet.c:59:37: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
         if (pos >= len) goto PROTO; ch = buf[pos++];
                                     ^~
dns_packet.c:63:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
       if (namelen + 1 > sizeof name) goto PROTO; name[namelen++] = ch;
       ^~
dns_packet.c:63:50: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
       if (namelen + 1 > sizeof name) goto PROTO; name[namelen++] = ch;
                                                  ^~~~
./compile dns_random.c
./compile dns_rcip.c
./compile dns_rcrw.c
./compile dns_resolve.c
./compile dns_sortip.c
./compile dns_transmit.c
./compile dns_txt.c
./makelib dns.a dns_dfd.o dns_domain.o dns_dtda.o dns_ip.o dns_ipq.o \
  dns_mx.o dns_name.o dns_nd.o dns_packet.o dns_random.o dns_rcip.o \
  dns_rcrw.o dns_resolve.o dns_sortip.o dns_transmit.o dns_txt.o
./compile alloc.c
./compile alloc_re.c
./compile buffer.c
./compile buffer_0.c
./compile buffer_1.c
./compile buffer_2.c
./compile buffer_get.c
./compile buffer_put.c
./compile buffer_read.c
./compile buffer_write.c
./compile coe.c
./compile env.c
./compile error.c
./compile error_str.c
./compile fd_copy.c
./compile fd_move.c
./compile fifo.c
./compile lock_ex.c
./compile lock_exnb.c
./compile ndelay_off.c
./compile ndelay_on.c
./compile open_append.c
./compile open_read.c
./compile open_trunc.c
./compile open_write.c
./compile openreadclose.c
./compile pathexec_env.c
./compile pathexec_run.c
pathexec_run.c: In function ‘pathexec_run’:
pathexec_run.c:18:5: warning: implicit declaration of function ‘execve’ [-Wimplicit-function-declaration]
     execve(file,argv,envp);
     ^~~~~~
./compile prot.c
prot.c: In function ‘prot_gid’:
prot.c:13:7: warning: implicit declaration of function ‘setgroups’ [-Wimplicit-function-declaration]
   if (setgroups(1,&gid) == -1) return -1;
       ^~~~~~~~~
prot.c:15:10: warning: implicit declaration of function ‘setgid’; did you mean ‘prot_gid’? [-Wimplicit-function-declaration]
   return setgid(gid); /* _should_ be redundant, but on some systems it isn't */
          ^~~~~~
          prot_gid
prot.c: In function ‘prot_uid’:
prot.c:20:10: warning: implicit declaration of function ‘setuid’; did you mean ‘prot_uid’? [-Wimplicit-function-declaration]
   return setuid(uid);
          ^~~~~~
          prot_uid
./compile readclose.c
./compile seek_set.c
seek_set.c: In function ‘seek_set’:
seek_set.c:9:7: warning: implicit declaration of function ‘lseek’ [-Wimplicit-function-declaration]
 { if (lseek(fd,(off_t) pos,SET) == -1) return -1; return 0; }
       ^~~~~
./compile sgetopt.c
./compile sig.c
./compile sig_block.c
./compile sig_catch.c
./compile sig_pause.c
./compile socket_bind.c
./compile socket_conn.c
socket_conn.c: In function ‘socket_connected’:
socket_conn.c:28:45: warning: pointer targets in passing argument 3 of ‘getpeername’ differ in signedness [-Wpointer-sign]
   if (getpeername(s,(struct sockaddr *) &sa,&dummy) == -1) {
                                             ^~~~~~
In file included from socket_conn.c:3:
/usr/include/x86_64-linux-gnu/sys/socket.h:130:12: note: expected ‘socklen_t * restrict’ {aka ‘unsigned int * restrict’} but argument is of type ‘int *’
 extern int getpeername (int __fd, __SOCKADDR_ARG __addr,
            ^~~~~~~~~~~
./compile socket_tcp.c
./compile socket_udp.c
./compile stralloc_cat.c
./compile stralloc_catb.c
./compile stralloc_cats.c
./compile stralloc_copy.c
./compile stralloc_eady.c
./compile stralloc_opyb.c
./compile stralloc_opys.c
./compile stralloc_pend.c
./compile strerr_die.c
./compile strerr_sys.c
./compile subgetopt.c
./compile wait_nohang.c
./compile wait_pid.c
./makelib unix.a alloc.o alloc_re.o buffer.o buffer_0.o buffer_1.o \
  buffer_2.o buffer_get.o buffer_put.o buffer_read.o buffer_write.o \
  coe.o env.o error.o error_str.o fd_copy.o fd_move.o fifo.o \
  lock_ex.o lock_exnb.o ndelay_off.o ndelay_on.o open_append.o \
  open_read.o open_trunc.o open_write.o openreadclose.o \
  pathexec_env.o pathexec_run.o prot.o readclose.o seek_set.o \
  sgetopt.o sig.o sig_block.o sig_catch.o sig_pause.o \
  socket_bind.o socket_conn.o socket_tcp.o socket_udp.o \
  stralloc_cat.o stralloc_catb.o stralloc_cats.o stralloc_copy.o \
  stralloc_eady.o stralloc_opyb.o stralloc_opys.o stralloc_pend.o \
  strerr_die.o strerr_sys.o subgetopt.o wait_nohang.o wait_pid.o
./compile byte_chr.c
byte_chr.c: In function ‘byte_chr’:
byte_chr.c:16:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; if (*t == ch) break; ++t; --n;
     ^~
byte_chr.c:16:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; if (*t == ch) break; ++t; --n;
                    ^~
byte_chr.c:17:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; if (*t == ch) break; ++t; --n;
     ^~
byte_chr.c:17:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; if (*t == ch) break; ++t; --n;
                    ^~
byte_chr.c:18:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; if (*t == ch) break; ++t; --n;
     ^~
byte_chr.c:18:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; if (*t == ch) break; ++t; --n;
                    ^~
byte_chr.c:19:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; if (*t == ch) break; ++t; --n;
     ^~
byte_chr.c:19:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; if (*t == ch) break; ++t; --n;
                    ^~
./compile byte_copy.c
byte_copy.c: In function ‘byte_copy’:
byte_copy.c:11:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return; *to++ = *from++; --n;
     ^~
byte_copy.c:11:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return; *to++ = *from++; --n;
                     ^
byte_copy.c:12:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return; *to++ = *from++; --n;
     ^~
byte_copy.c:12:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return; *to++ = *from++; --n;
                     ^
byte_copy.c:13:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return; *to++ = *from++; --n;
     ^~
byte_copy.c:13:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return; *to++ = *from++; --n;
                     ^
byte_copy.c:14:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return; *to++ = *from++; --n;
     ^~
byte_copy.c:14:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return; *to++ = *from++; --n;
                     ^
./compile byte_cr.c
byte_cr.c: In function ‘byte_copyr’:
byte_cr.c:13:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return; *--to = *--from; --n;
     ^~
byte_cr.c:13:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return; *--to = *--from; --n;
                     ^
byte_cr.c:14:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return; *--to = *--from; --n;
     ^~
byte_cr.c:14:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return; *--to = *--from; --n;
                     ^
byte_cr.c:15:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return; *--to = *--from; --n;
     ^~
byte_cr.c:15:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return; *--to = *--from; --n;
                     ^
byte_cr.c:16:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return; *--to = *--from; --n;
     ^~
byte_cr.c:16:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return; *--to = *--from; --n;
                     ^
./compile byte_diff.c
byte_diff.c: In function ‘byte_diff’:
byte_diff.c:11:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return 0; if (*s != *t) break; ++s; ++t; --n;
     ^~
byte_diff.c:11:23: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return 0; if (*s != *t) break; ++s; ++t; --n;
                       ^~
byte_diff.c:12:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return 0; if (*s != *t) break; ++s; ++t; --n;
     ^~
byte_diff.c:12:23: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return 0; if (*s != *t) break; ++s; ++t; --n;
                       ^~
byte_diff.c:13:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return 0; if (*s != *t) break; ++s; ++t; --n;
     ^~
byte_diff.c:13:23: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return 0; if (*s != *t) break; ++s; ++t; --n;
                       ^~
byte_diff.c:14:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) return 0; if (*s != *t) break; ++s; ++t; --n;
     ^~
byte_diff.c:14:23: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) return 0; if (*s != *t) break; ++s; ++t; --n;
                       ^~
./compile byte_rchr.c
byte_rchr.c: In function ‘byte_rchr’:
byte_rchr.c:18:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; if (*t == ch) u = t; ++t; --n;
     ^~
byte_rchr.c:18:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; if (*t == ch) u = t; ++t; --n;
                    ^~
byte_rchr.c:19:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; if (*t == ch) u = t; ++t; --n;
     ^~
byte_rchr.c:19:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; if (*t == ch) u = t; ++t; --n;
                    ^~
byte_rchr.c:20:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; if (*t == ch) u = t; ++t; --n;
     ^~
byte_rchr.c:20:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; if (*t == ch) u = t; ++t; --n;
                    ^~
byte_rchr.c:21:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; if (*t == ch) u = t; ++t; --n;
     ^~
byte_rchr.c:21:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; if (*t == ch) u = t; ++t; --n;
                    ^~
./compile byte_zero.c
byte_zero.c: In function ‘byte_zero’:
byte_zero.c:8:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; *s++ = 0; --n;
     ^~
byte_zero.c:8:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; *s++ = 0; --n;
                    ^
byte_zero.c:9:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; *s++ = 0; --n;
     ^~
byte_zero.c:9:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; *s++ = 0; --n;
                    ^
byte_zero.c:10:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; *s++ = 0; --n;
     ^~
byte_zero.c:10:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; *s++ = 0; --n;
                    ^
byte_zero.c:11:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!n) break; *s++ = 0; --n;
     ^~
byte_zero.c:11:20: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!n) break; *s++ = 0; --n;
                    ^
./compile case_diffb.c
./compile fmt_uint.c
./compile fmt_uint0.c
./compile fmt_ulong.c
./compile ip4_scan.c
ip4_scan.c: In function ‘ip4_scan’:
ip4_scan.c:12:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
   if (*s != '.') return 0; ++s; ++len;
   ^~
ip4_scan.c:12:28: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
   if (*s != '.') return 0; ++s; ++len;
                            ^~
ip4_scan.c:14:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
   if (*s != '.') return 0; ++s; ++len;
   ^~
ip4_scan.c:14:28: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
   if (*s != '.') return 0; ++s; ++len;
                            ^~
ip4_scan.c:16:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
   if (*s != '.') return 0; ++s; ++len;
   ^~
ip4_scan.c:16:28: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
   if (*s != '.') return 0; ++s; ++len;
                            ^~
./compile scan_ulong.c
./compile str_chr.c
str_chr.c: In function ‘str_chr’:
str_chr.c:13:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!*t) break; if (*t == ch) break; ++t;
     ^~
str_chr.c:13:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!*t) break; if (*t == ch) break; ++t;
                     ^~
str_chr.c:14:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!*t) break; if (*t == ch) break; ++t;
     ^~
str_chr.c:14:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!*t) break; if (*t == ch) break; ++t;
                     ^~
str_chr.c:15:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!*t) break; if (*t == ch) break; ++t;
     ^~
str_chr.c:15:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!*t) break; if (*t == ch) break; ++t;
                     ^~
str_chr.c:16:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!*t) break; if (*t == ch) break; ++t;
     ^~
str_chr.c:16:21: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!*t) break; if (*t == ch) break; ++t;
                     ^~
./compile str_diff.c
./compile str_len.c
str_len.c: In function ‘str_len’:
str_len.c:11:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!*t) return t - s; ++t;
     ^~
str_len.c:11:28: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!*t) return t - s; ++t;
                            ^~
str_len.c:12:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!*t) return t - s; ++t;
     ^~
str_len.c:12:28: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!*t) return t - s; ++t;
                            ^~
str_len.c:13:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!*t) return t - s; ++t;
     ^~
str_len.c:13:28: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!*t) return t - s; ++t;
                            ^~
str_len.c:14:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
     if (!*t) return t - s; ++t;
     ^~
str_len.c:14:28: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
     if (!*t) return t - s; ++t;
                            ^~
./compile str_start.c
./compile uint16_pack.c
./compile uint16_unpack.c
./makelib byte.a byte_chr.o byte_copy.o byte_cr.o byte_diff.o \
  byte_rchr.o byte_zero.o case_diffb.o fmt_uint.o fmt_uint0.o \
  fmt_ulong.o ip4_scan.o scan_ulong.o str_chr.o str_diff.o str_len.o \
  str_start.o uint16_pack.o uint16_unpack.o
./compile iopause.c
./compile tai_now.c
./compile tai_pack.c
./compile tai_sub.c
./compile tai_unpack.c
./compile taia_add.c
./compile taia_approx.c
./compile taia_frac.c
./compile taia_less.c
./compile taia_now.c
./compile taia_pack.c
./compile taia_sub.c
./compile taia_uint.c
./makelib time.a iopause.o tai_now.o tai_pack.o tai_sub.o \
  tai_unpack.o taia_add.o taia_approx.o taia_frac.o taia_less.o \
  taia_now.o taia_pack.o taia_sub.o taia_uint.o
./load tcpsvd ipsvd_log.o ipsvd_fmt.o ipsvd_check.o ipsvd_hostname.o \
  ipsvd_phcc.o ipsvd_scan.o uidgid.o cdb.a dns.a unix.a byte.a \
  time.a `cat socket.lib`
./compile udpsvd.c
udpsvd.c: In function ‘main’:
udpsvd.c:259:9: warning: implicit declaration of function ‘setgroups’; did you mean ‘getgroups’? [-Wimplicit-function-declaration]
     if (setgroups(ugid.gids, ugid.gid) == -1) fatal("unable to set groups");
         ^~~~~~~~~
         getgroups
udpsvd.c:271:36: warning: passing argument 2 of ‘fmt_ulong’ makes integer from pointer without a cast [-Wint-conversion]
       bufnum[fmt_ulong(bufnum, ugid.gid)] =0;
                                ~~~~^~~~
In file included from udpsvd.c:17:
fmt.h:16:38: note: expected ‘long unsigned int’ but argument is of type ‘gid_t *’ {aka ‘unsigned int *’}
 extern unsigned int fmt_ulong(char *,unsigned long);
                                      ^~~~~~~~~~~~~
udpsvd.c:294:22: warning: pointer targets in passing argument 6 of ‘recvfrom’ differ in signedness [-Wpointer-sign]
                      &socka_size) == -1) drop("unable to read from socket");
                      ^~~~~~~~~~~
In file included from udpsvd.c:2:
/usr/include/x86_64-linux-gnu/sys/socket.h:163:16: note: expected ‘socklen_t * restrict’ {aka ‘unsigned int * restrict’} but argument is of type ‘int *’
 extern ssize_t recvfrom (int __fd, void *__restrict __buf, size_t __n,
                ^~~~~~~~
./load udpsvd ipsvd_log.o ipsvd_fmt.o ipsvd_check.o ipsvd_hostname.o \
  ipsvd_scan.o uidgid.o cdb.a dns.a unix.a byte.a time.a \
  `cat socket.lib`
./compile ipsvd-cdb.c
./load ipsvd-cdb ipsvd_fmt.o ipsvd_check.o cdb.a dns.a unix.a byte.a \
  time.a `cat socket.lib`
make `cat command.ssl`
make[2]: Entering directory '/<<PKGBUILDDIR>>/ipsvd-1.0.0/compile'
: no ssl library, not making sslio
make[2]: Leaving directory '/<<PKGBUILDDIR>>/ipsvd-1.0.0/compile'
make[1]: Leaving directory '/<<PKGBUILDDIR>>/ipsvd-1.0.0/compile'
Copying commands into ./command...
+ : tcpsvd
+ : udpsvd
+ : ipsvd-cdb
Checking commands in ./command...
+ cd compile
+ exec make check
make[1]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.
make[1]: Entering directory '/<<PKGBUILDDIR>>/ipsvd-1.0.0/compile'
./compile check-tcpsvd.c
./load check-tcpsvd unix.a byte.a `cat socket.lib`
./compile check-udpsvd.c
./load check-udpsvd unix.a byte.a `cat socket.lib`
./compile check-ipsvd-cdb.c
./load check-ipsvd-cdb uint32_unpack.o unix.a byte.a
./check-local tcpsvd udpsvd ipsvd-cdb `grep -v nossl <command.ssl || :`
Checking tcpsvd...
Checking udpsvd...
Checking ipsvd-cdb...
make[1]: Leaving directory '/<<PKGBUILDDIR>>/ipsvd-1.0.0/compile'
touch build-stamp
 fakeroot debian/rules binary-arch
rm -rf '/<<PKGBUILDDIR>>/debian/ipsvd'
# programs
install -d -m0755 '/<<PKGBUILDDIR>>/debian/ipsvd'/usr/bin
for i in tcpsvd udpsvd ipsvd-cdb; do \
  install -m0755 ipsvd/command/$i '/<<PKGBUILDDIR>>/debian/ipsvd'/usr/bin/ || exit 1; \
done
strip -R .comment -R .note '/<<PKGBUILDDIR>>/debian/ipsvd'/usr/bin/*
# man pages
for i in 5 7 8; do \
  install -d -m0755 '/<<PKGBUILDDIR>>/debian/ipsvd'/usr/share/man/man$i && \
  for j in ipsvd/man/*.$i; do \
    install -m0644 $j '/<<PKGBUILDDIR>>/debian/ipsvd'/usr/share/man/man$i/ || exit 1; \
  done || exit 1; \
done
rm -f '/<<PKGBUILDDIR>>/debian/ipsvd'/usr/share/man/man8/ssl*.8
gzip -9n '/<<PKGBUILDDIR>>/debian/ipsvd'/usr/share/man/man?/*.?
# changelog
rm -f changelog && ln -s ipsvd/package/CHANGES changelog
: implicit
: debian/ipsvd/DEBIAN/
: debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 debian/copyright debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 debian/changelog debian/ipsvd/usr/share/doc/ipsvd/changelog.Debian
+ install -m0644 changelog debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/package/README debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/benefits.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/examples.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/index.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/install.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/ipsvd-cdb.8.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/ipsvd-instruct.5.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/ipsvd.7.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/sslio.8.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/sslsvd.8.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/tcpsvd.8.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/udpsvd.8.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/upgrade.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 ipsvd/doc/usedietlibc.html debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 debian/README.Debian.diet debian/ipsvd/usr/share/doc/ipsvd/
+ install -m0644 debian/ipsvd.NEWS.Debian debian/ipsvd/usr/share/doc/ipsvd/NEWS.Debian
+ gzip -9n debian/ipsvd/usr/share/doc/ipsvd/NEWS.Debian
: debian/ipsvd/usr/share/doc/ipsvd/examples/
: debian/ipsvd/usr/share/doc/ipsvd/ ok
: debian/ipsvd/DEBIAN/md5sums
: debian/ipsvd/DEBIAN/ ok
test 'gcc' != 'gcc' || dpkg-shlibdeps '/<<PKGBUILDDIR>>/debian/ipsvd'/usr/bin/*
arm-linux-gnueabihf-objdump: /<<PKGBUILDDIR>>/debian/ipsvd/usr/bin/tcpsvd: file format not recognized
arm-linux-gnueabihf-objdump: /<<PKGBUILDDIR>>/debian/ipsvd/usr/bin/ipsvd-cdb: file format not recognized
arm-linux-gnueabihf-objdump: /<<PKGBUILDDIR>>/debian/ipsvd/usr/bin/udpsvd: file format not recognized
dpkg-gencontrol -isp -pipsvd -P'/<<PKGBUILDDIR>>/debian/ipsvd'
dpkg-gencontrol: warning: -isp is deprecated; it is without effect
dpkg-gencontrol: warning: Depends field of package ipsvd: substitution variable ${shlibs:Depends} used, but is not defined
dpkg -b '/<<PKGBUILDDIR>>/debian/ipsvd' ..
dpkg-deb: building package 'ipsvd' in '../ipsvd_1.0.0-3.1_armhf.deb'.
 dpkg-genbuildinfo --build=any
 dpkg-genchanges --build=any >../ipsvd_1.0.0-3.1_armhf.changes
dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included)
 dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2019-03-04T14:28:38Z

Finished
--------

I: Built successfully

+------------------------------------------------------------------------------+
| Changes                                                                      |
+------------------------------------------------------------------------------+


ipsvd_1.0.0-3.1_armhf.changes:
------------------------------

Format: 1.8
Date: Thu, 28 Sep 2017 09:53:28 +0100
Source: ipsvd
Binary: ipsvd
Built-For-Profiles: cross nocheck
Architecture: armhf
Version: 1.0.0-3.1
Distribution: unstable-amd64-sbuild
Urgency: medium
Maintainer: Gerrit Pape <pape@smarden.org>
Changed-By: Chris Lamb <lamby@debian.org>
Description:
 ipsvd      - Internet protocol service daemons
Closes: 777417 846890
Changes:
 ipsvd (1.0.0-3.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Apply patches by myself and Valerie R. Young to make the build
     reproducible. (Closes: #777417, #846890)
Checksums-Sha1:
 26a15b23f77046c99b8d25e7a09d3995a7b3717e 3238 ipsvd_1.0.0-3.1_armhf.buildinfo
 7449be0d57aa49c0ebcb4b7c6b9c45a03191c17b 67612 ipsvd_1.0.0-3.1_armhf.deb
Checksums-Sha256:
 40e2a9c8e7e60d30eb369c91d6cef8948eca4a884c982f1f6984d08ed14ac29b 3238 ipsvd_1.0.0-3.1_armhf.buildinfo
 a9846a9c8948645a43b3b76bd20ff67a92f2bf0034db395e646939ba408e1369 67612 ipsvd_1.0.0-3.1_armhf.deb
Files:
 dd691b95eccf86b84263438db166b3c3 3238 net optional ipsvd_1.0.0-3.1_armhf.buildinfo
 cf8f852c0db6938b3365f62a699cda04 67612 net optional ipsvd_1.0.0-3.1_armhf.deb

+------------------------------------------------------------------------------+
| Buildinfo                                                                    |
+------------------------------------------------------------------------------+

Format: 1.0
Source: ipsvd
Binary: ipsvd
Architecture: armhf
Version: 1.0.0-3.1
Checksums-Md5:
 cf8f852c0db6938b3365f62a699cda04 67612 ipsvd_1.0.0-3.1_armhf.deb
Checksums-Sha1:
 7449be0d57aa49c0ebcb4b7c6b9c45a03191c17b 67612 ipsvd_1.0.0-3.1_armhf.deb
Checksums-Sha256:
 a9846a9c8948645a43b3b76bd20ff67a92f2bf0034db395e646939ba408e1369 67612 ipsvd_1.0.0-3.1_armhf.deb
Build-Origin: Debian
Build-Architecture: amd64
Build-Date: Mon, 04 Mar 2019 14:28:37 +0000
Build-Path: /<<PKGBUILDDIR>>
Installed-Build-Depends:
 base-files (= 10.1),
 base-passwd (= 3.5.46),
 bash (= 5.0-2),
 binutils (= 2.31.1-14),
 binutils-common (= 2.31.1-14),
 binutils-x86-64-linux-gnu (= 2.31.1-14),
 bsdutils (= 1:2.33.1-0.1),
 build-essential (= 12.5),
 bzip2 (= 1.0.6-9),
 coreutils (= 8.30-2),
 cpp (= 4:8.2.0-2),
 cpp-8 (= 8.3.0-2),
 dash (= 0.5.10.2-5),
 debconf (= 1.5.71),
 debianutils (= 4.8.6.1),
 diffutils (= 1:3.7-2),
 dpkg (= 1.19.5),
 dpkg-dev (= 1.19.5),
 fdisk (= 2.33.1-0.1),
 findutils (= 4.6.0+git+20190209-2),
 g++ (= 4:8.2.0-2),
 g++-8 (= 8.3.0-2),
 gcc (= 4:8.2.0-2),
 gcc-8 (= 8.3.0-2),
 gcc-8-base (= 8.3.0-2),
 grep (= 3.3-1),
 gzip (= 1.9-3),
 hostname (= 3.21),
 init-system-helpers (= 1.56+nmu1),
 libacl1 (= 2.2.52-5),
 libasan5 (= 8.3.0-2),
 libatomic1 (= 8.3.0-2),
 libattr1 (= 1:2.4.47-4),
 libaudit-common (= 1:2.8.4-2),
 libaudit1 (= 1:2.8.4-2),
 libbinutils (= 2.31.1-14),
 libblkid1 (= 2.33.1-0.1),
 libbz2-1.0 (= 1.0.6-9),
 libc-bin (= 2.28-7),
 libc-dev-bin (= 2.28-7),
 libc6 (= 2.28-7),
 libc6-dev (= 2.28-7),
 libcap-ng0 (= 0.7.9-2),
 libcc1-0 (= 8.3.0-2),
 libdb5.3 (= 5.3.28+dfsg1-0.5),
 libdebconfclient0 (= 0.247),
 libdpkg-perl (= 1.19.5),
 libfdisk1 (= 2.33.1-0.1),
 libgcc-8-dev (= 8.3.0-2),
 libgcc1 (= 1:8.3.0-2),
 libgcrypt20 (= 1.8.4-5),
 libgdbm-compat4 (= 1.18.1-3),
 libgdbm6 (= 1.18.1-3),
 libgmp10 (= 2:6.1.2+dfsg-4),
 libgomp1 (= 8.3.0-2),
 libgpg-error0 (= 1.35-1),
 libisl19 (= 0.20-2),
 libitm1 (= 8.3.0-2),
 liblsan0 (= 8.3.0-2),
 liblz4-1 (= 1.8.3-1),
 liblzma5 (= 5.2.4-1),
 libmount1 (= 2.33.1-0.1),
 libmpc3 (= 1.1.0-1),
 libmpfr6 (= 4.0.2-1),
 libmpx2 (= 8.3.0-2),
 libncursesw6 (= 6.1+20181013-2),
 libpam-modules (= 1.3.1-5),
 libpam-modules-bin (= 1.3.1-5),
 libpam-runtime (= 1.3.1-5),
 libpam0g (= 1.3.1-5),
 libpcre3 (= 2:8.39-11),
 libperl5.28 (= 5.28.1-4),
 libquadmath0 (= 8.3.0-2),
 libselinux1 (= 2.8-1+b1),
 libsmartcols1 (= 2.33.1-0.1),
 libstdc++-8-dev (= 8.3.0-2),
 libstdc++6 (= 8.3.0-2),
 libsystemd0 (= 241-1),
 libtinfo6 (= 6.1+20181013-2),
 libtsan0 (= 8.3.0-2),
 libubsan1 (= 8.3.0-2),
 libudev1 (= 241-1),
 libuuid1 (= 2.33.1-0.1),
 linux-libc-dev (= 4.19.20-1),
 login (= 1:4.5-1.1),
 make (= 4.2.1-1.2),
 mawk (= 1.3.3-17+b3),
 ncurses-base (= 6.1+20181013-2),
 ncurses-bin (= 6.1+20181013-2),
 patch (= 2.7.6-3),
 perl (= 5.28.1-4),
 perl-base (= 5.28.1-4),
 perl-modules-5.28 (= 5.28.1-4),
 sed (= 4.7-1),
 sysvinit-utils (= 2.93-8),
 tar (= 1.30+dfsg-5),
 util-linux (= 2.33.1-0.1),
 xz-utils (= 5.2.4-1),
 zlib1g (= 1:1.2.11.dfsg-1)
Environment:
 DEB_BUILD_OPTIONS="nocheck parallel=16"
 DEB_BUILD_PROFILES="cross nocheck"
 LANG="en_US.UTF-8"
 LC_ALL="C.UTF-8"
 LD_LIBRARY_PATH="/usr/lib/libeatmydata"
 MAKEFLAGS=" -j16"
 SOURCE_DATE_EPOCH="1506588808"


+------------------------------------------------------------------------------+
| Package contents                                                             |
+------------------------------------------------------------------------------+


ipsvd_1.0.0-3.1_armhf.deb
-------------------------

 new Debian package, version 2.0.
 size 67612 bytes: control archive=1544 bytes.
     952 bytes,    22 lines      control              
    1784 bytes,    27 lines      md5sums              
 Package: ipsvd
 Version: 1.0.0-3.1
 Architecture: armhf
 Maintainer: Gerrit Pape <pape@smarden.org>
 Installed-Size: 265
 Suggests: runit
 Section: net
 Priority: optional
 Description: Internet protocol service daemons
  ipsvd is a set of Internet protocol service daemons for TCP/IP (optionally
  SSLv3) and UDP/IP.  A daemon waits for incoming connections on a socket;
  for new connections, it conditionally runs an arbitrary program to handle
  the connection.  The daemons can be told to read and follow pre-defined
  instructions on how to handle incoming connections; based on the client's
  IP address or hostname, they can run different programs, set a different
  environment, deny a connection, or set a per host concurrency limit.
  .
  ipsvd can be used to run services usually run by inetd or tcpserver.
  Normally the daemons are run by a supervisor process, such as runsv from
  the runit package.
  .
  See http://smarden.org/ipsvd/ for more information.

drwxr-xr-x root/root         0 2017-09-28 08:53 ./
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/bin/
-rwxr-xr-x root/root     47504 2017-09-28 08:53 ./usr/bin/ipsvd-cdb
-rwxr-xr-x root/root     64080 2017-09-28 08:53 ./usr/bin/tcpsvd
-rwxr-xr-x root/root     55824 2017-09-28 08:53 ./usr/bin/udpsvd
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/share/
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/share/doc/
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/share/doc/ipsvd/
-rw-r--r-- root/root       245 2017-09-28 08:53 ./usr/share/doc/ipsvd/NEWS.Debian.gz
-rw-r--r-- root/root        54 2017-09-28 08:53 ./usr/share/doc/ipsvd/README
-rw-r--r-- root/root       633 2017-09-28 08:53 ./usr/share/doc/ipsvd/README.Debian.diet
-rw-r--r-- root/root      4948 2017-09-28 08:53 ./usr/share/doc/ipsvd/benefits.html
-rw-r--r-- root/root      2072 2017-09-28 08:53 ./usr/share/doc/ipsvd/changelog.Debian.gz
-rw-r--r-- root/root      4269 2017-09-28 08:53 ./usr/share/doc/ipsvd/changelog.gz
-rw-r--r-- root/root      1551 2017-09-28 08:53 ./usr/share/doc/ipsvd/copyright
-rw-r--r-- root/root      5082 2017-09-28 08:53 ./usr/share/doc/ipsvd/examples.html
-rw-r--r-- root/root      3241 2017-09-28 08:53 ./usr/share/doc/ipsvd/index.html
-rw-r--r-- root/root      1833 2017-09-28 08:53 ./usr/share/doc/ipsvd/install.html
-rw-r--r-- root/root      1553 2017-09-28 08:53 ./usr/share/doc/ipsvd/ipsvd-cdb.8.html
-rw-r--r-- root/root      7542 2017-09-28 08:53 ./usr/share/doc/ipsvd/ipsvd-instruct.5.html
-rw-r--r-- root/root      4080 2017-09-28 08:53 ./usr/share/doc/ipsvd/ipsvd.7.html
-rw-r--r-- root/root      6697 2017-09-28 08:53 ./usr/share/doc/ipsvd/sslio.8.html
-rw-r--r-- root/root      8897 2017-09-28 08:53 ./usr/share/doc/ipsvd/sslsvd.8.html
-rw-r--r-- root/root      6334 2017-09-28 08:53 ./usr/share/doc/ipsvd/tcpsvd.8.html
-rw-r--r-- root/root      5988 2017-09-28 08:53 ./usr/share/doc/ipsvd/udpsvd.8.html
-rw-r--r-- root/root      3155 2017-09-28 08:53 ./usr/share/doc/ipsvd/upgrade.html
-rw-r--r-- root/root       916 2017-09-28 08:53 ./usr/share/doc/ipsvd/usedietlibc.html
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/share/man/
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/share/man/man5/
-rw-r--r-- root/root      2120 2017-09-28 08:53 ./usr/share/man/man5/ipsvd-instruct.5.gz
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/share/man/man7/
-rw-r--r-- root/root      1284 2017-09-28 08:53 ./usr/share/man/man7/ipsvd.7.gz
drwxr-xr-x root/root         0 2017-09-28 08:53 ./usr/share/man/man8/
-rw-r--r-- root/root       437 2017-09-28 08:53 ./usr/share/man/man8/ipsvd-cdb.8.gz
-rw-r--r-- root/root      1971 2017-09-28 08:53 ./usr/share/man/man8/tcpsvd.8.gz
-rw-r--r-- root/root      1875 2017-09-28 08:53 ./usr/share/man/man8/udpsvd.8.gz


lintian
-------


Setup apt archive
-----------------

Merged Build-Depends: lintian:amd64
Filtered Build-Depends: lintian:amd64
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [963 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [509 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [590 B]
Fetched 2062 B in 0s (153 kB/s)
Reading package lists...
Reading package lists...

Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl uuid-runtime
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
  bsdmainutils diffstat gettext gettext-base groff-base intltool-debian
  libapt-pkg-perl libarchive-zip-perl libbsd0 libcapture-tiny-perl
  libcgi-pm-perl libclass-accessor-perl libclone-perl libcroco3
  libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl
  libfile-basedir-perl libfuture-perl libglib2.0-0 libio-async-perl
  libio-pty-perl libipc-run-perl libipc-system-simple-perl
  liblist-moreutils-perl libncurses6 libnet-dns-perl libnet-domain-tld-perl
  libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libpipeline1
  libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl libuchardet0
  lintian man-db patchutils t1utils
Suggested packages:
  wamerican | wordlist whois vacation gettext-doc autopoint libasprintf-dev
  libgettextpo-dev groff libhtml-template-perl binutils-multiarch
  libtext-template-perl apparmor less www-browser
Recommended packages:
  curl | wget | lynx libcgi-fast-perl libglib2.0-data shared-mime-info
  xdg-user-dirs libasync-mergepoint-perl libsereal-perl libtest-fatal-perl
  libtest-refcount-perl libgpm2 libdigest-bubblebabble-perl
  libnet-dns-sec-perl libnet-libidn-perl libunicode-utf8-perl
  libperlio-gzip-perl
The following NEW packages will be installed:
  bsdmainutils diffstat gettext gettext-base groff-base intltool-debian
  libapt-pkg-perl libarchive-zip-perl libbsd0 libcapture-tiny-perl
  libcgi-pm-perl libclass-accessor-perl libclone-perl libcroco3
  libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl
  libfile-basedir-perl libfuture-perl libglib2.0-0 libio-async-perl
  libio-pty-perl libipc-run-perl libipc-system-simple-perl
  liblist-moreutils-perl libncurses6 libnet-dns-perl libnet-domain-tld-perl
  libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libpipeline1
  libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl libuchardet0
  lintian man-db patchutils sbuild-build-depends-lintian-dummy:armhf t1utils
0 upgraded, 41 newly installed, 0 to remove and 0 not upgraded.
Need to get 2847 kB/8601 kB of archives.
After this operation, 29.3 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [844 B]
Get:2 http://10.116.41.102/debian sid/main amd64 libapt-pkg-perl amd64 0.1.34+b1 [71.2 kB]
Get:3 http://10.116.41.102/debian sid/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB]
Get:4 http://10.116.41.102/debian sid/main amd64 libcgi-pm-perl all 4.40-1 [222 kB]
Get:5 http://10.116.41.102/debian sid/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB]
Get:6 http://10.116.41.102/debian sid/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB]
Get:7 http://10.116.41.102/debian sid/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB]
Get:8 http://10.116.41.102/debian sid/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB]
Get:9 http://10.116.41.102/debian sid/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB]
Get:10 http://10.116.41.102/debian sid/main amd64 libnet-dns-perl all 1.19-1 [372 kB]
Get:11 http://10.116.41.102/debian sid/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB]
Get:12 http://10.116.41.102/debian sid/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB]
Get:13 http://10.116.41.102/debian sid/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB]
Get:14 http://10.116.41.102/debian sid/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB]
Get:15 http://10.116.41.102/debian sid/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB]
Get:16 http://10.116.41.102/debian sid/main amd64 libfuture-perl all 0.39-1 [74.5 kB]
Get:17 http://10.116.41.102/debian sid/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB]
Get:18 http://10.116.41.102/debian sid/main amd64 libio-async-perl all 0.72-1 [262 kB]
Get:19 http://10.116.41.102/debian sid/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB]
Get:20 http://10.116.41.102/debian sid/main amd64 libipc-run-perl all 20180523.0-1 [101 kB]
Get:21 http://10.116.41.102/debian sid/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB]
Get:22 http://10.116.41.102/debian sid/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB]
Get:23 http://10.116.41.102/debian sid/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB]
Get:24 http://10.116.41.102/debian sid/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB]
Get:25 http://10.116.41.102/debian sid/main amd64 t1utils amd64 1.41-3 [62.3 kB]
Get:26 http://10.116.41.102/debian sid/main amd64 lintian all 2.9.1 [1193 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 2847 kB in 0s (5861 kB/s)
Selecting previously unselected package libbsd0:amd64.
(Reading database ... 17195 files and directories currently installed.)
Preparing to unpack .../00-libbsd0_0.9.1-2_amd64.deb ...
Unpacking libbsd0:amd64 (0.9.1-2) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ...
Unpacking bsdmainutils (11.1.2+b1) ...
Selecting previously unselected package libuchardet0:amd64.
Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ...
Unpacking libuchardet0:amd64 (0.0.6-3) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../03-groff-base_1.22.4-2_amd64.deb ...
Unpacking groff-base (1.22.4-2) ...
Selecting previously unselected package libpipeline1:amd64.
Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ...
Unpacking libpipeline1:amd64 (1.5.1-2) ...
Selecting previously unselected package man-db.
Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ...
Unpacking man-db (2.8.5-2) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../06-gettext-base_0.19.8.1-9_amd64.deb ...
Unpacking gettext-base (0.19.8.1-9) ...
Selecting previously unselected package diffstat.
Preparing to unpack .../07-diffstat_1.62-1_amd64.deb ...
Unpacking diffstat (1.62-1) ...
Selecting previously unselected package libglib2.0-0:amd64.
Preparing to unpack .../08-libglib2.0-0_2.58.3-1_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.58.3-1) ...
Selecting previously unselected package libcroco3:amd64.
Preparing to unpack .../09-libcroco3_0.6.12-3_amd64.deb ...
Unpacking libcroco3:amd64 (0.6.12-3) ...
Selecting previously unselected package libncurses6:amd64.
Preparing to unpack .../10-libncurses6_6.1+20181013-2_amd64.deb ...
Unpacking libncurses6:amd64 (6.1+20181013-2) ...
Selecting previously unselected package gettext.
Preparing to unpack .../11-gettext_0.19.8.1-9_amd64.deb ...
Unpacking gettext (0.19.8.1-9) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../12-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package libapt-pkg-perl.
Preparing to unpack .../13-libapt-pkg-perl_0.1.34+b1_amd64.deb ...
Unpacking libapt-pkg-perl (0.1.34+b1) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../14-libarchive-zip-perl_1.64-1_all.deb ...
Unpacking libarchive-zip-perl (1.64-1) ...
Selecting previously unselected package libcapture-tiny-perl.
Preparing to unpack .../15-libcapture-tiny-perl_0.48-1_all.deb ...
Unpacking libcapture-tiny-perl (0.48-1) ...
Selecting previously unselected package libcgi-pm-perl.
Preparing to unpack .../16-libcgi-pm-perl_4.40-1_all.deb ...
Unpacking libcgi-pm-perl (4.40-1) ...
Selecting previously unselected package libsub-name-perl.
Preparing to unpack .../17-libsub-name-perl_0.21-1+b3_amd64.deb ...
Unpacking libsub-name-perl (0.21-1+b3) ...
Selecting previously unselected package libclass-accessor-perl.
Preparing to unpack .../18-libclass-accessor-perl_0.51-1_all.deb ...
Unpacking libclass-accessor-perl (0.51-1) ...
Selecting previously unselected package libclone-perl.
Preparing to unpack .../19-libclone-perl_0.41-1+b1_amd64.deb ...
Unpacking libclone-perl (0.41-1+b1) ...
Selecting previously unselected package libdigest-hmac-perl.
Preparing to unpack .../20-libdigest-hmac-perl_1.03+dfsg-2_all.deb ...
Unpacking libdigest-hmac-perl (1.03+dfsg-2) ...
Selecting previously unselected package libnet-ip-perl.
Preparing to unpack .../21-libnet-ip-perl_1.26-2_all.deb ...
Unpacking libnet-ip-perl (1.26-2) ...
Selecting previously unselected package libnet-dns-perl.
Preparing to unpack .../22-libnet-dns-perl_1.19-1_all.deb ...
Unpacking libnet-dns-perl (1.19-1) ...
Selecting previously unselected package libnet-domain-tld-perl.
Preparing to unpack .../23-libnet-domain-tld-perl_1.75-1_all.deb ...
Unpacking libnet-domain-tld-perl (1.75-1) ...
Selecting previously unselected package libemail-valid-perl.
Preparing to unpack .../24-libemail-valid-perl_1.202-1_all.deb ...
Unpacking libemail-valid-perl (1.202-1) ...
Selecting previously unselected package libexporter-tiny-perl.
Preparing to unpack .../25-libexporter-tiny-perl_1.002001-1_all.deb ...
Unpacking libexporter-tiny-perl (1.002001-1) ...
Selecting previously unselected package libipc-system-simple-perl.
Preparing to unpack .../26-libipc-system-simple-perl_1.25-4_all.deb ...
Unpacking libipc-system-simple-perl (1.25-4) ...
Selecting previously unselected package libfile-basedir-perl.
Preparing to unpack .../27-libfile-basedir-perl_0.08-1_all.deb ...
Unpacking libfile-basedir-perl (0.08-1) ...
Selecting previously unselected package libfuture-perl.
Preparing to unpack .../28-libfuture-perl_0.39-1_all.deb ...
Unpacking libfuture-perl (0.39-1) ...
Selecting previously unselected package libstruct-dumb-perl.
Preparing to unpack .../29-libstruct-dumb-perl_0.09-1_all.deb ...
Unpacking libstruct-dumb-perl (0.09-1) ...
Selecting previously unselected package libio-async-perl.
Preparing to unpack .../30-libio-async-perl_0.72-1_all.deb ...
Unpacking libio-async-perl (0.72-1) ...
Selecting previously unselected package libio-pty-perl.
Preparing to unpack .../31-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ...
Unpacking libio-pty-perl (1:1.08-1.1+b5) ...
Selecting previously unselected package libipc-run-perl.
Preparing to unpack .../32-libipc-run-perl_20180523.0-1_all.deb ...
Unpacking libipc-run-perl (20180523.0-1) ...
Selecting previously unselected package liblist-moreutils-perl.
Preparing to unpack .../33-liblist-moreutils-perl_0.416-1+b4_amd64.deb ...
Unpacking liblist-moreutils-perl (0.416-1+b4) ...
Selecting previously unselected package libparse-debianchangelog-perl.
Preparing to unpack .../34-libparse-debianchangelog-perl_1.2.0-13_all.deb ...
Unpacking libparse-debianchangelog-perl (1.2.0-13) ...
Selecting previously unselected package libpath-tiny-perl.
Preparing to unpack .../35-libpath-tiny-perl_0.108-1_all.deb ...
Unpacking libpath-tiny-perl (0.108-1) ...
Selecting previously unselected package libtext-levenshtein-perl.
Preparing to unpack .../36-libtext-levenshtein-perl_0.13-1_all.deb ...
Unpacking libtext-levenshtein-perl (0.13-1) ...
Selecting previously unselected package patchutils.
Preparing to unpack .../37-patchutils_0.3.4-2_amd64.deb ...
Unpacking patchutils (0.3.4-2) ...
Selecting previously unselected package t1utils.
Preparing to unpack .../38-t1utils_1.41-3_amd64.deb ...
Unpacking t1utils (1.41-3) ...
Selecting previously unselected package lintian.
Preparing to unpack .../39-lintian_2.9.1_all.deb ...
Unpacking lintian (2.9.1) ...
Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf.
Preparing to unpack .../40-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Setting up libapt-pkg-perl (0.1.34+b1) ...
Setting up libpipeline1:amd64 (1.5.1-2) ...
Setting up libstruct-dumb-perl (0.09-1) ...
Setting up libio-pty-perl (1:1.08-1.1+b5) ...
Setting up libclone-perl (0.41-1+b1) ...
Setting up libarchive-zip-perl (1.64-1) ...
Setting up libglib2.0-0:amd64 (2.58.3-1) ...
No schema files found: doing nothing.
Setting up libfuture-perl (0.39-1) ...
Setting up libcgi-pm-perl (4.40-1) ...
Setting up gettext-base (0.19.8.1-9) ...
Setting up libtext-levenshtein-perl (0.13-1) ...
Setting up libio-async-perl (0.72-1) ...
Setting up patchutils (0.3.4-2) ...
Setting up libdigest-hmac-perl (1.03+dfsg-2) ...
Setting up libipc-system-simple-perl (1.25-4) ...
Setting up libnet-domain-tld-perl (1.75-1) ...
Setting up libncurses6:amd64 (6.1+20181013-2) ...
Setting up t1utils (1.41-3) ...
Setting up diffstat (1.62-1) ...
Setting up libcroco3:amd64 (0.6.12-3) ...
Setting up libipc-run-perl (20180523.0-1) ...
Setting up libcapture-tiny-perl (0.48-1) ...
Setting up libsub-name-perl (0.21-1+b3) ...
Setting up libpath-tiny-perl (0.108-1) ...
Setting up libuchardet0:amd64 (0.0.6-3) ...
Setting up libexporter-tiny-perl (1.002001-1) ...
Setting up libclass-accessor-perl (0.51-1) ...
Setting up libnet-ip-perl (1.26-2) ...
Setting up libbsd0:amd64 (0.9.1-2) ...
Setting up libfile-basedir-perl (0.08-1) ...
Setting up gettext (0.19.8.1-9) ...
Setting up liblist-moreutils-perl (0.416-1+b4) ...
Setting up libnet-dns-perl (1.19-1) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up libparse-debianchangelog-perl (1.2.0-13) ...
Setting up bsdmainutils (11.1.2+b1) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up groff-base (1.22.4-2) ...
Setting up libemail-valid-perl (1.202-1) ...
Setting up man-db (2.8.5-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up lintian (2.9.1) ...
Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Processing triggers for libc-bin (2.28-7) ...
W: ipsvd source: missing-debian-source-format
W: ipsvd source: ancient-standards-version 3.9.2.0 (released 2011-04-07) (current is 4.3.0)
E: ipsvd: binary-from-other-architecture usr/bin/ipsvd-cdb
E: ipsvd: binary-from-other-architecture usr/bin/tcpsvd
E: ipsvd: binary-from-other-architecture usr/bin/udpsvd
W: ipsvd: missing-depends-line

E: Lintian run failed (policy violation)

+------------------------------------------------------------------------------+
| Post Build                                                                   |
+------------------------------------------------------------------------------+


+------------------------------------------------------------------------------+
| Cleanup                                                                      |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl uuid-runtime
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl libmailtools-perl
  libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime
Use 'apt autoremove' to remove them.
The following packages will be REMOVED:
  bsdmainutils* diffstat* gcc-8-base:armhf* gettext* gettext-base* groff-base*
  intltool-debian* libapt-pkg-perl* libarchive-zip-perl* libasan5:armhf*
  libatomic1:armhf* libbsd0* libc6:armhf* libc6-dev:armhf*
  libcapture-tiny-perl* libcgi-pm-perl* libclass-accessor-perl* libclone-perl*
  libcroco3* libdigest-hmac-perl* libemail-valid-perl* libexporter-tiny-perl*
  libfile-basedir-perl* libfuture-perl* libgcc-8-dev:armhf* libgcc1:armhf*
  libglib2.0-0* libgomp1:armhf* libio-async-perl* libio-pty-perl*
  libipc-run-perl* libipc-system-simple-perl* liblist-moreutils-perl*
  libncurses6* libnet-dns-perl* libnet-domain-tld-perl* libnet-ip-perl*
  libparse-debianchangelog-perl* libpath-tiny-perl* libpipeline1*
  libstdc++-8-dev:armhf* libstdc++6:armhf* libstruct-dumb-perl*
  libsub-name-perl* libtext-levenshtein-perl* libubsan1:armhf* libuchardet0*
  lintian* linux-libc-dev:armhf* man-db* patchutils*
  sbuild-build-depends-lintian-dummy:armhf*
  sbuild-build-depends-main-dummy:armhf* t1utils*
0 upgraded, 0 newly installed, 54 to remove and 0 not upgraded.
After this operation, 79.0 MB disk space will be freed.
(Reading database ... 19513 files and directories currently installed.)
Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Removing lintian (2.9.1) ...
Removing man-db (2.8.5-2) ...
Removing bsdmainutils (11.1.2+b1) ...
Removing diffstat (1.62-1) ...
Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Removing libstdc++-8-dev:armhf (8.3.0-2) ...
Removing libgcc-8-dev:armhf (8.3.0-2) ...
Removing libubsan1:armhf (8.3.0-2) ...
Removing libasan5:armhf (8.3.0-2) ...
Removing libstdc++6:armhf (8.3.0-2) ...
Removing intltool-debian (0.35.0+20060710.5) ...
Removing gettext (0.19.8.1-9) ...
Removing gettext-base (0.19.8.1-9) ...
Removing groff-base (1.22.4-2) ...
Removing libapt-pkg-perl (0.1.34+b1) ...
Removing libarchive-zip-perl (1.64-1) ...
Removing libatomic1:armhf (8.3.0-2) ...
Removing libbsd0:amd64 (0.9.1-2) ...
Removing libc6-dev:armhf (2.28-7) ...
Removing libgomp1:armhf (8.3.0-2) ...
Removing libcapture-tiny-perl (0.48-1) ...
Removing libparse-debianchangelog-perl (1.2.0-13) ...
Removing libcgi-pm-perl (4.40-1) ...
Removing libclass-accessor-perl (0.51-1) ...
Removing libclone-perl (0.41-1+b1) ...
Removing libcroco3:amd64 (0.6.12-3) ...
Removing libemail-valid-perl (1.202-1) ...
Removing libnet-dns-perl (1.19-1) ...
Removing libdigest-hmac-perl (1.03+dfsg-2) ...
Removing liblist-moreutils-perl (0.416-1+b4) ...
Removing libexporter-tiny-perl (1.002001-1) ...
Removing libfile-basedir-perl (0.08-1) ...
Removing libio-async-perl (0.72-1) ...
Removing libfuture-perl (0.39-1) ...
Removing libglib2.0-0:amd64 (2.58.3-1) ...
Removing libipc-run-perl (20180523.0-1) ...
Removing libio-pty-perl (1:1.08-1.1+b5) ...
Removing libipc-system-simple-perl (1.25-4) ...
Removing libncurses6:amd64 (6.1+20181013-2) ...
Removing libnet-domain-tld-perl (1.75-1) ...
Removing libnet-ip-perl (1.26-2) ...
Removing libpath-tiny-perl (0.108-1) ...
Removing libpipeline1:amd64 (1.5.1-2) ...
Removing libstruct-dumb-perl (0.09-1) ...
Removing libsub-name-perl (0.21-1+b3) ...
Removing libtext-levenshtein-perl (0.13-1) ...
Removing libuchardet0:amd64 (0.0.6-3) ...
Removing linux-libc-dev:armhf (4.19.20-1) ...
Removing patchutils (0.3.4-2) ...
Removing t1utils (1.41-3) ...
Removing libgcc1:armhf (1:8.3.0-2) ...
Removing gcc-8-base:armhf (8.3.0-2) ...
Removing libc6:armhf (2.28-7) ...
Processing triggers for ccache (3.6-1) ...
Updating symlinks in /usr/lib/ccache ...
Processing triggers for libc-bin (2.28-7) ...
(Reading database ... 16455 files and directories currently installed.)
Purging configuration files for libglib2.0-0:amd64 (2.58.3-1) ...
Purging configuration files for lintian (2.9.1) ...
Purging configuration files for man-db (2.8.5-2) ...
Purging configuration files for bsdmainutils (11.1.2+b1) ...
Purging configuration files for libc6:armhf (2.28-7) ...
Purging configuration files for groff-base (1.22.4-2) ...

+------------------------------------------------------------------------------+
| Summary                                                                      |
+------------------------------------------------------------------------------+

Build Architecture: amd64
Build Profiles: cross nocheck
Build Type: any
Build-Space: n/a
Build-Time: 19
Distribution: unstable-amd64-sbuild
Foreign Architectures: armhf
Host Architecture: armhf
Install-Time: 4
Job: /home/build/sbuild-setup/repo/pool/main/i/ipsvd/ipsvd_1.0.0-3.1.dsc
Lintian: fail
Machine Architecture: amd64
Package: ipsvd
Package-Time: 28
Source-Version: 1.0.0-3.1
Space: n/a
Status: successful
Version: 1.0.0-3.1
--------------------------------------------------------------------------------
Finished at 2019-03-04T14:28:38Z
Build needed 00:00:28, no disk space