sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 4be29f1fdf49 +==============================================================================+ | libgsecuredelete 0.3-1 (armhf) Tue, 02 Jul 2019 03:09:06 +0000 | +==============================================================================+ Package: libgsecuredelete Version: 0.3-1 Source Version: 0.3-1 Distribution: unstable-amd64-sbuild Machine Architecture: amd64 Host Architecture: armhf Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-8ec62896-5f31-4f87-802e-f820bde7c60d' with '<>' I: NOTICE: Log filtering will replace 'build/libgsecuredelete-d32eUB/resolver-IDKi6C' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Hit:1 http://cdn-fastly.deb.debian.org/debian unstable InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following package was automatically installed and is no longer required: sensible-utils Use 'apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /home/build/sbuild-setup/repo/pool/main/libg/libgsecuredelete/libgsecuredelete_0.3-1.dsc exists in /home/build/sbuild-setup/repo/pool/main/libg/libgsecuredelete; copying to chroot I: NOTICE: Log filtering will replace 'build/libgsecuredelete-d32eUB/libgsecuredelete-0.3' with '<>' I: NOTICE: Log filtering will replace 'build/libgsecuredelete-d32eUB' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper (>= 9), dh-autoreconf, dpkg-dev (>= 1.16.1.1~), libglib2.0-dev, valac, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf Filtered Build-Depends: debhelper (>= 9), dh-autoreconf, dpkg-dev (>= 1.16.1.1~), libglib2.0-dev, valac, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [433 B] Get:5 copy:/<>/apt_archive ./ Packages [520 B] Fetched 1910 B in 0s (144 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev binutils-arm-linux-gnueabihf bsdmainutils cpp-8-arm-linux-gnueabihf cpp-arm-linux-gnueabihf cross-config crossbuild-essential-armhf debhelper dh-autoreconf dh-strip-nondeterminism dpkg-cross dwz file g++-8-arm-linux-gnueabihf g++-arm-linux-gnueabihf gcc-8-arm-linux-gnueabihf gcc-8-arm-linux-gnueabihf-base gcc-8-base:armhf gcc-8-cross-base gcc-arm-linux-gnueabihf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libasan5-armhf-cross libatomic1:armhf libatomic1-armhf-cross libblkid-dev:armhf libblkid1:armhf libbsd0 libc6:armhf libc6-armhf-cross libc6-dev:armhf libc6-dev-armhf-cross libconfig-auto-perl libconfig-inifiles-perl libcroco3 libdebian-dpkgcross-perl libexpat1 libffi-dev:armhf libffi6:armhf libfile-homedir-perl libfile-stripnondeterminism-perl libfile-which-perl libgcc-8-dev:armhf libgcc-8-dev-armhf-cross libgcc1:armhf libgcc1-armhf-cross libglib2.0-0 libglib2.0-0:armhf libglib2.0-bin libglib2.0-data libglib2.0-dev:armhf libglib2.0-dev-bin libgomp1:armhf libgomp1-armhf-cross libicu63 libio-string-perl liblocale-gettext-perl libmagic-mgc libmagic1 libmount-dev:armhf libmount1:armhf libmpdec2 libncurses6 libpcre16-3:armhf libpcre3:armhf libpcre3-dev:armhf libpcre32-3:armhf libpcrecpp0v5:armhf libpipeline1 libpython3-stdlib libpython3.7-minimal libpython3.7-stdlib libselinux1:armhf libselinux1-dev:armhf libsepol1:armhf libsepol1-dev:armhf libsigsegv2 libssl1.1 libstdc++-8-dev:armhf libstdc++-8-dev-armhf-cross libstdc++6:armhf libstdc++6-armhf-cross libtool libubsan1:armhf libubsan1-armhf-cross libuchardet0 libuuid1:armhf libvala-0.42-0:armhf libxml-libxml-perl libxml-namespacesupport-perl libxml-sax-base-perl libxml-sax-perl libxml-simple-perl libxml2 libyaml-perl linux-libc-dev:armhf linux-libc-dev-armhf-cross m4 man-db mime-support pkg-config po-debconf python3 python3-distutils python3-lib2to3 python3-minimal python3.7 python3.7-minimal ucf uuid-dev:armhf valac:armhf valac-0.42-vapi zlib1g:armhf zlib1g-dev:armhf Suggested packages: autoconf-archive gnu-standards autoconf-doc binutils-doc wamerican | wordlist whois vacation gcc-8-locales cpp-doc dh-make binutils-multiarch gcc-8-doc libstdc++6-8-dbg-armhf-cross libgcc1-dbg-armhf-cross libgomp1-dbg-armhf-cross libitm1-dbg-armhf-cross libatomic1-dbg-armhf-cross libasan5-dbg-armhf-cross liblsan0-dbg-armhf-cross libtsan0-dbg-armhf-cross libubsan1-dbg-armhf-cross libmpx2-dbg-armhf-cross libquadmath0-dbg-armhf-cross manpages-dev flex bison gdb-arm-linux-gnueabihf gcc-doc gettext-doc libasprintf-dev libgettextpo-dev groff glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf libglib2.0-doc:armhf libgdk-pixbuf2.0-bin | libgdk-pixbuf2.0-dev libxml2-utils libstdc++-8-doc:armhf libtool-doc gfortran | fortran95-compiler gcj-jdk libyaml-shell-perl m4-doc apparmor less www-browser libmail-box-perl python3-doc python3-tk python3-venv python3.7-venv python3.7-doc binfmt-support Recommended packages: curl | wget | lynx libidn2-0:armhf libarchive-cpio-perl shared-mime-info xdg-user-dirs shared-mime-info:armhf xdg-user-dirs:armhf libgpm2 libltdl-dev uuid-runtime:armhf libwww-perl libxml-sax-expat-perl libyaml-libyaml-perl | libyaml-syck-perl libmail-sendmail-perl gcc:armhf The following NEW packages will be installed: autoconf automake autopoint autotools-dev binutils-arm-linux-gnueabihf bsdmainutils cpp-8-arm-linux-gnueabihf cpp-arm-linux-gnueabihf cross-config crossbuild-essential-armhf debhelper dh-autoreconf dh-strip-nondeterminism dpkg-cross dwz file g++-8-arm-linux-gnueabihf g++-arm-linux-gnueabihf gcc-8-arm-linux-gnueabihf gcc-8-arm-linux-gnueabihf-base gcc-8-base:armhf gcc-8-cross-base gcc-arm-linux-gnueabihf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libasan5-armhf-cross libatomic1:armhf libatomic1-armhf-cross libblkid-dev:armhf libblkid1:armhf libbsd0 libc6:armhf libc6-armhf-cross libc6-dev:armhf libc6-dev-armhf-cross libconfig-auto-perl libconfig-inifiles-perl libcroco3 libdebian-dpkgcross-perl libexpat1 libffi-dev:armhf libffi6:armhf libfile-homedir-perl libfile-stripnondeterminism-perl libfile-which-perl libgcc-8-dev:armhf libgcc-8-dev-armhf-cross libgcc1:armhf libgcc1-armhf-cross libglib2.0-0 libglib2.0-0:armhf libglib2.0-bin libglib2.0-data libglib2.0-dev:armhf libglib2.0-dev-bin libgomp1:armhf libgomp1-armhf-cross libicu63 libio-string-perl liblocale-gettext-perl libmagic-mgc libmagic1 libmount-dev:armhf libmount1:armhf libmpdec2 libncurses6 libpcre16-3:armhf libpcre3:armhf libpcre3-dev:armhf libpcre32-3:armhf libpcrecpp0v5:armhf libpipeline1 libpython3-stdlib libpython3.7-minimal libpython3.7-stdlib libselinux1:armhf libselinux1-dev:armhf libsepol1:armhf libsepol1-dev:armhf libsigsegv2 libssl1.1 libstdc++-8-dev:armhf libstdc++-8-dev-armhf-cross libstdc++6:armhf libstdc++6-armhf-cross libtool libubsan1:armhf libubsan1-armhf-cross libuchardet0 libuuid1:armhf libvala-0.42-0:armhf libxml-libxml-perl libxml-namespacesupport-perl libxml-sax-base-perl libxml-sax-perl libxml-simple-perl libxml2 libyaml-perl linux-libc-dev:armhf linux-libc-dev-armhf-cross m4 man-db mime-support pkg-config po-debconf python3 python3-distutils python3-lib2to3 python3-minimal python3.7 python3.7-minimal sbuild-build-depends-main-dummy:armhf ucf uuid-dev:armhf valac:armhf valac-0.42-vapi zlib1g:armhf zlib1g-dev:armhf 0 upgraded, 122 newly installed, 0 to remove and 0 not upgraded. Need to get 2179 kB/76.6 MB of archives. After this operation, 298 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [944 B] Get:2 http://cdn-fastly.deb.debian.org/debian unstable/main armhf libvala-0.42-0 armhf 0.42.5-1 [637 kB] Get:3 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 valac-0.42-vapi all 0.42.5-1 [908 kB] Get:4 http://cdn-fastly.deb.debian.org/debian unstable/main armhf valac armhf 0.42.5-1 [633 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2179 kB in 3s (865 kB/s) Selecting previously unselected package libbsd0:amd64. (Reading database ... 12449 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_amd64.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package liblocale-gettext-perl. Preparing to unpack .../06-liblocale-gettext-perl_1.07-3+b4_amd64.deb ... Unpacking liblocale-gettext-perl (1.07-3+b4) ... Selecting previously unselected package libssl1.1:amd64. Preparing to unpack .../07-libssl1.1_1.1.1c-1_amd64.deb ... Unpacking libssl1.1:amd64 (1.1.1c-1) ... Selecting previously unselected package libpython3.7-minimal:amd64. Preparing to unpack .../08-libpython3.7-minimal_3.7.3-2_amd64.deb ... Unpacking libpython3.7-minimal:amd64 (3.7.3-2) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../09-libexpat1_2.2.6-2_amd64.deb ... Unpacking libexpat1:amd64 (2.2.6-2) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../10-python3.7-minimal_3.7.3-2_amd64.deb ... Unpacking python3.7-minimal (3.7.3-2) ... Setting up libssl1.1:amd64 (1.1.1c-1) ... Setting up libpython3.7-minimal:amd64 (3.7.3-2) ... Setting up libexpat1:amd64 (2.2.6-2) ... Setting up python3.7-minimal (3.7.3-2) ... Selecting previously unselected package python3-minimal. (Reading database ... 13359 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_amd64.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:amd64. Preparing to unpack .../2-libmpdec2_2.4.2-2_amd64.deb ... Unpacking libmpdec2:amd64 (2.4.2-2) ... Selecting previously unselected package libpython3.7-stdlib:amd64. Preparing to unpack .../3-libpython3.7-stdlib_3.7.3-2_amd64.deb ... Unpacking libpython3.7-stdlib:amd64 (3.7.3-2) ... Selecting previously unselected package python3.7. Preparing to unpack .../4-python3.7_3.7.3-2_amd64.deb ... Unpacking python3.7 (3.7.3-2) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../5-libpython3-stdlib_3.7.3-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... 13796 files and directories currently installed.) Preparing to unpack .../000-python3_3.7.3-1_amd64.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../001-libmagic-mgc_1%3a5.35-4_amd64.deb ... Unpacking libmagic-mgc (1:5.35-4) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../002-libmagic1_1%3a5.35-4_amd64.deb ... Unpacking libmagic1:amd64 (1:5.35-4) ... Selecting previously unselected package file. Preparing to unpack .../003-file_1%3a5.35-4_amd64.deb ... Unpacking file (1:5.35-4) ... Selecting previously unselected package gettext-base. Preparing to unpack .../004-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package ucf. Preparing to unpack .../005-ucf_3.0038+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0038+nmu1) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../006-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../007-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../008-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../009-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../010-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../011-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package binutils-arm-linux-gnueabihf. Preparing to unpack .../012-binutils-arm-linux-gnueabihf_2.31.1-16_amd64.deb ... Unpacking binutils-arm-linux-gnueabihf (2.31.1-16) ... Selecting previously unselected package gcc-8-arm-linux-gnueabihf-base:amd64. Preparing to unpack .../013-gcc-8-arm-linux-gnueabihf-base_8.3.0-7cross1_amd64.deb ... Unpacking gcc-8-arm-linux-gnueabihf-base:amd64 (8.3.0-7cross1) ... Selecting previously unselected package cpp-8-arm-linux-gnueabihf. Preparing to unpack .../014-cpp-8-arm-linux-gnueabihf_8.3.0-7cross1_amd64.deb ... Unpacking cpp-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Selecting previously unselected package cpp-arm-linux-gnueabihf. Preparing to unpack .../015-cpp-arm-linux-gnueabihf_4%3a8.3.0-1_amd64.deb ... Unpacking cpp-arm-linux-gnueabihf (4:8.3.0-1) ... Selecting previously unselected package cross-config. Preparing to unpack .../016-cross-config_2.6.15-3_all.deb ... Unpacking cross-config (2.6.15-3) ... Selecting previously unselected package gcc-8-cross-base. Preparing to unpack .../017-gcc-8-cross-base_8.3.0-7cross1_all.deb ... Unpacking gcc-8-cross-base (8.3.0-7cross1) ... Selecting previously unselected package libc6-armhf-cross. Preparing to unpack .../018-libc6-armhf-cross_2.28-10cross2_all.deb ... Unpacking libc6-armhf-cross (2.28-10cross2) ... Selecting previously unselected package libgcc1-armhf-cross. Preparing to unpack .../019-libgcc1-armhf-cross_1%3a8.3.0-7cross1_all.deb ... Unpacking libgcc1-armhf-cross (1:8.3.0-7cross1) ... Selecting previously unselected package libgomp1-armhf-cross. Preparing to unpack .../020-libgomp1-armhf-cross_8.3.0-7cross1_all.deb ... Unpacking libgomp1-armhf-cross (8.3.0-7cross1) ... Selecting previously unselected package libatomic1-armhf-cross. Preparing to unpack .../021-libatomic1-armhf-cross_8.3.0-7cross1_all.deb ... Unpacking libatomic1-armhf-cross (8.3.0-7cross1) ... Selecting previously unselected package libstdc++6-armhf-cross. Preparing to unpack .../022-libstdc++6-armhf-cross_8.3.0-7cross1_all.deb ... Unpacking libstdc++6-armhf-cross (8.3.0-7cross1) ... Selecting previously unselected package libasan5-armhf-cross. Preparing to unpack .../023-libasan5-armhf-cross_8.3.0-7cross1_all.deb ... Unpacking libasan5-armhf-cross (8.3.0-7cross1) ... Selecting previously unselected package libubsan1-armhf-cross. Preparing to unpack .../024-libubsan1-armhf-cross_8.3.0-7cross1_all.deb ... Unpacking libubsan1-armhf-cross (8.3.0-7cross1) ... Selecting previously unselected package libgcc-8-dev-armhf-cross. Preparing to unpack .../025-libgcc-8-dev-armhf-cross_8.3.0-7cross1_all.deb ... Unpacking libgcc-8-dev-armhf-cross (8.3.0-7cross1) ... Selecting previously unselected package gcc-8-arm-linux-gnueabihf. Preparing to unpack .../026-gcc-8-arm-linux-gnueabihf_8.3.0-7cross1_amd64.deb ... Unpacking gcc-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Selecting previously unselected package gcc-arm-linux-gnueabihf. Preparing to unpack .../027-gcc-arm-linux-gnueabihf_4%3a8.3.0-1_amd64.deb ... Unpacking gcc-arm-linux-gnueabihf (4:8.3.0-1) ... Selecting previously unselected package linux-libc-dev-armhf-cross. Preparing to unpack .../028-linux-libc-dev-armhf-cross_4.19.28-2cross2_all.deb ... Unpacking linux-libc-dev-armhf-cross (4.19.28-2cross2) ... Selecting previously unselected package libc6-dev-armhf-cross. Preparing to unpack .../029-libc6-dev-armhf-cross_2.28-10cross2_all.deb ... Unpacking libc6-dev-armhf-cross (2.28-10cross2) ... Selecting previously unselected package libstdc++-8-dev-armhf-cross. Preparing to unpack .../030-libstdc++-8-dev-armhf-cross_8.3.0-7cross1_all.deb ... Unpacking libstdc++-8-dev-armhf-cross (8.3.0-7cross1) ... Selecting previously unselected package g++-8-arm-linux-gnueabihf. Preparing to unpack .../031-g++-8-arm-linux-gnueabihf_8.3.0-7cross1_amd64.deb ... Unpacking g++-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Selecting previously unselected package g++-arm-linux-gnueabihf. Preparing to unpack .../032-g++-arm-linux-gnueabihf_4%3a8.3.0-1_amd64.deb ... Unpacking g++-arm-linux-gnueabihf (4:8.3.0-1) ... Selecting previously unselected package libconfig-inifiles-perl. Preparing to unpack .../033-libconfig-inifiles-perl_3.000001-1_all.deb ... Unpacking libconfig-inifiles-perl (3.000001-1) ... Selecting previously unselected package libio-string-perl. Preparing to unpack .../034-libio-string-perl_1.08-3_all.deb ... Unpacking libio-string-perl (1.08-3) ... Selecting previously unselected package libicu63:amd64. Preparing to unpack .../035-libicu63_63.2-2_amd64.deb ... Unpacking libicu63:amd64 (63.2-2) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../036-libxml2_2.9.4+dfsg1-7+b3_amd64.deb ... Unpacking libxml2:amd64 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libxml-namespacesupport-perl. Preparing to unpack .../037-libxml-namespacesupport-perl_1.12-1_all.deb ... Unpacking libxml-namespacesupport-perl (1.12-1) ... Selecting previously unselected package libxml-sax-base-perl. Preparing to unpack .../038-libxml-sax-base-perl_1.09-1_all.deb ... Unpacking libxml-sax-base-perl (1.09-1) ... Selecting previously unselected package libxml-sax-perl. Preparing to unpack .../039-libxml-sax-perl_1.00+dfsg-1_all.deb ... Unpacking libxml-sax-perl (1.00+dfsg-1) ... Selecting previously unselected package libxml-libxml-perl. Preparing to unpack .../040-libxml-libxml-perl_2.0134+dfsg-1_amd64.deb ... Unpacking libxml-libxml-perl (2.0134+dfsg-1) ... Selecting previously unselected package libxml-simple-perl. Preparing to unpack .../041-libxml-simple-perl_2.25-1_all.deb ... Unpacking libxml-simple-perl (2.25-1) ... Selecting previously unselected package libyaml-perl. Preparing to unpack .../042-libyaml-perl_1.27-1_all.deb ... Unpacking libyaml-perl (1.27-1) ... Selecting previously unselected package libconfig-auto-perl. Preparing to unpack .../043-libconfig-auto-perl_0.44-1_all.deb ... Unpacking libconfig-auto-perl (0.44-1) ... Selecting previously unselected package libfile-which-perl. Preparing to unpack .../044-libfile-which-perl_1.23-1_all.deb ... Unpacking libfile-which-perl (1.23-1) ... Selecting previously unselected package libfile-homedir-perl. Preparing to unpack .../045-libfile-homedir-perl_1.004-1_all.deb ... Unpacking libfile-homedir-perl (1.004-1) ... Selecting previously unselected package libdebian-dpkgcross-perl. Preparing to unpack .../046-libdebian-dpkgcross-perl_2.6.15-3_all.deb ... Unpacking libdebian-dpkgcross-perl (2.6.15-3) ... Selecting previously unselected package dpkg-cross. Preparing to unpack .../047-dpkg-cross_2.6.15-3_all.deb ... Unpacking dpkg-cross (2.6.15-3) ... Selecting previously unselected package crossbuild-essential-armhf. Preparing to unpack .../048-crossbuild-essential-armhf_12.6_all.deb ... Unpacking crossbuild-essential-armhf (12.6) ... Selecting previously unselected package libtool. Preparing to unpack .../049-libtool_2.4.6-10_all.deb ... Unpacking libtool (2.4.6-10) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../050-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../051-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../052-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../053-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package dwz. Preparing to unpack .../054-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../055-libglib2.0-0_2.58.3-2_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-2) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../056-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../057-libncurses6_6.1+20181013-2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2) ... Selecting previously unselected package gettext. Preparing to unpack .../058-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../059-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../060-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../061-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package gcc-8-base:armhf. Preparing to unpack .../062-gcc-8-base_8.3.0-7_armhf.deb ... Unpacking gcc-8-base:armhf (8.3.0-7) ... Selecting previously unselected package libgcc1:armhf. Preparing to unpack .../063-libgcc1_1%3a8.3.0-7_armhf.deb ... Unpacking libgcc1:armhf (1:8.3.0-7) ... Selecting previously unselected package libc6:armhf. Preparing to unpack .../064-libc6_2.28-10_armhf.deb ... Unpacking libc6:armhf (2.28-10) ... Selecting previously unselected package libstdc++6:armhf. Preparing to unpack .../065-libstdc++6_8.3.0-7_armhf.deb ... Unpacking libstdc++6:armhf (8.3.0-7) ... Selecting previously unselected package libasan5:armhf. Preparing to unpack .../066-libasan5_8.3.0-7_armhf.deb ... Unpacking libasan5:armhf (8.3.0-7) ... Selecting previously unselected package libatomic1:armhf. Preparing to unpack .../067-libatomic1_8.3.0-7_armhf.deb ... Unpacking libatomic1:armhf (8.3.0-7) ... Selecting previously unselected package libuuid1:armhf. Preparing to unpack .../068-libuuid1_2.33.1-0.1_armhf.deb ... Unpacking libuuid1:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid1:armhf. Preparing to unpack .../069-libblkid1_2.33.1-0.1_armhf.deb ... Unpacking libblkid1:armhf (2.33.1-0.1) ... Selecting previously unselected package linux-libc-dev:armhf. Preparing to unpack .../070-linux-libc-dev_4.19.37-5_armhf.deb ... Unpacking linux-libc-dev:armhf (4.19.37-5) ... Selecting previously unselected package libc6-dev:armhf. Preparing to unpack .../071-libc6-dev_2.28-10_armhf.deb ... Unpacking libc6-dev:armhf (2.28-10) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../072-uuid-dev_2.33.1-0.1_armhf.deb ... Unpacking uuid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../073-libblkid-dev_2.33.1-0.1_armhf.deb ... Unpacking libblkid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libffi6:armhf. Preparing to unpack .../074-libffi6_3.2.1-9_armhf.deb ... Unpacking libffi6:armhf (3.2.1-9) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../075-libffi-dev_3.2.1-9_armhf.deb ... Unpacking libffi-dev:armhf (3.2.1-9) ... Selecting previously unselected package libgomp1:armhf. Preparing to unpack .../076-libgomp1_8.3.0-7_armhf.deb ... Unpacking libgomp1:armhf (8.3.0-7) ... Selecting previously unselected package libubsan1:armhf. Preparing to unpack .../077-libubsan1_8.3.0-7_armhf.deb ... Unpacking libubsan1:armhf (8.3.0-7) ... Selecting previously unselected package libgcc-8-dev:armhf. Preparing to unpack .../078-libgcc-8-dev_8.3.0-7_armhf.deb ... Unpacking libgcc-8-dev:armhf (8.3.0-7) ... Selecting previously unselected package libpcre3:armhf. Preparing to unpack .../079-libpcre3_2%3a8.39-12_armhf.deb ... Unpacking libpcre3:armhf (2:8.39-12) ... Selecting previously unselected package libselinux1:armhf. Preparing to unpack .../080-libselinux1_2.8-1+b1_armhf.deb ... Unpacking libselinux1:armhf (2.8-1+b1) ... Selecting previously unselected package libmount1:armhf. Preparing to unpack .../081-libmount1_2.33.1-0.1_armhf.deb ... Unpacking libmount1:armhf (2.33.1-0.1) ... Selecting previously unselected package zlib1g:armhf. Preparing to unpack .../082-zlib1g_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../083-libglib2.0-0_2.58.3-2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../084-libglib2.0-data_2.58.3-2_all.deb ... Unpacking libglib2.0-data (2.58.3-2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../085-libglib2.0-bin_2.58.3-2_amd64.deb ... Unpacking libglib2.0-bin (2.58.3-2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../086-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../087-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../088-libglib2.0-dev-bin_2.58.3-2_amd64.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../089-libmount-dev_2.33.1-0.1_armhf.deb ... Unpacking libmount-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:armhf. Preparing to unpack .../090-libpcre16-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre16-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcre32-3:armhf. Preparing to unpack .../091-libpcre32-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre32-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:armhf. Preparing to unpack .../092-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Unpacking libpcrecpp0v5:armhf (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:armhf. Preparing to unpack .../093-libpcre3-dev_2%3a8.39-12_armhf.deb ... Unpacking libpcre3-dev:armhf (2:8.39-12) ... Selecting previously unselected package libsepol1:armhf. Preparing to unpack .../094-libsepol1_2.8-1_armhf.deb ... Unpacking libsepol1:armhf (2.8-1) ... Selecting previously unselected package libsepol1-dev:armhf. Preparing to unpack .../095-libsepol1-dev_2.8-1_armhf.deb ... Unpacking libsepol1-dev:armhf (2.8-1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../096-libselinux1-dev_2.8-1+b1_armhf.deb ... Unpacking libselinux1-dev:armhf (2.8-1+b1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../097-pkg-config_0.29-6_amd64.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../098-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../099-libglib2.0-dev_2.58.3-2_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.58.3-2) ... Selecting previously unselected package libstdc++-8-dev:armhf. Preparing to unpack .../100-libstdc++-8-dev_8.3.0-7_armhf.deb ... Unpacking libstdc++-8-dev:armhf (8.3.0-7) ... Selecting previously unselected package libvala-0.42-0:armhf. Preparing to unpack .../101-libvala-0.42-0_0.42.5-1_armhf.deb ... Unpacking libvala-0.42-0:armhf (0.42.5-1) ... Selecting previously unselected package valac-0.42-vapi. Preparing to unpack .../102-valac-0.42-vapi_0.42.5-1_all.deb ... Unpacking valac-0.42-vapi (0.42.5-1) ... Selecting previously unselected package valac:armhf. Preparing to unpack .../103-valac_0.42.5-1_armhf.deb ... Unpacking valac:armhf (0.42.5-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy:armhf. Preparing to unpack .../104-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Setting up libconfig-inifiles-perl (3.000001-1) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up libfile-which-perl (1.23-1) ... Setting up libc6-armhf-cross (2.28-10cross2) ... Setting up mime-support (3.62) ... Setting up libmagic-mgc (1:5.35-4) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-2) ... No schema files found: doing nothing. Setting up gcc-8-cross-base (8.3.0-7cross1) ... Setting up libmagic1:amd64 (1:5.35-4) ... Setting up linux-libc-dev:armhf (4.19.37-5) ... Setting up libxml-namespacesupport-perl (1.12-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4) ... Setting up libatomic1-armhf-cross (8.3.0-7cross1) ... Setting up libyaml-perl (1.27-1) ... Setting up libicu63:amd64 (63.2-2) ... Setting up libxml-sax-base-perl (1.09-1) ... Setting up libio-string-perl (1.08-3) ... Setting up autotools-dev (20180224.1) ... Setting up libglib2.0-data (2.58.3-2) ... Setting up cross-config (2.6.15-3) ... Setting up libgcc1-armhf-cross (1:8.3.0-7cross1) ... Setting up gcc-8-arm-linux-gnueabihf-base:amd64 (8.3.0-7cross1) ... Setting up libncurses6:amd64 (6.1+20181013-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up valac-0.42-vapi (0.42.5-1) ... Setting up gcc-8-base:armhf (8.3.0-7) ... Setting up linux-libc-dev-armhf-cross (4.19.28-2cross2) ... Setting up autopoint (0.19.8.1-9) ... Setting up pkg-config (0.29-6) ... Setting up ucf (3.0038+nmu1) ... Setting up dwz (0.12-3) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up libmpdec2:amd64 (2.4.2-2) ... Setting up libfile-homedir-perl (1.004-1) ... Setting up libbsd0:amd64 (0.9.1-2) ... Setting up binutils-arm-linux-gnueabihf (2.31.1-16) ... Setting up libxml2:amd64 (2.9.4+dfsg1-7+b3) ... Setting up liblocale-gettext-perl (1.07-3+b4) ... Setting up cpp-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Setting up libgomp1-armhf-cross (8.3.0-7cross1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libpython3.7-stdlib:amd64 (3.7.3-2) ... Setting up libtool (2.4.6-10) ... Setting up libc6-dev-armhf-cross (2.28-10cross2) ... Setting up libglib2.0-bin (2.58.3-2) ... Setting up m4 (1.4.18-2) ... Setting up libxml-sax-perl (1.00+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up libstdc++6-armhf-cross (8.3.0-7cross1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:amd64 (0.6.12-3) ... Setting up libubsan1-armhf-cross (8.3.0-7cross1) ... Setting up autoconf (2.69-11) ... Setting up libxml-libxml-perl (2.0134+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up groff-base (1.22.4-3) ... Setting up cpp-arm-linux-gnueabihf (4:8.3.0-1) ... Setting up libpython3-stdlib:amd64 (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2) ... Setting up gettext (0.19.8.1-9) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libasan5-armhf-cross (8.3.0-7cross1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libxml-simple-perl (2.25-1) ... Setting up libgcc-8-dev-armhf-cross (8.3.0-7cross1) ... Setting up libstdc++-8-dev-armhf-cross (8.3.0-7cross1) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up gcc-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Setting up gcc-arm-linux-gnueabihf (4:8.3.0-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up libglib2.0-dev-bin (2.58.3-2) ... Setting up po-debconf (1.0.21) ... Setting up libconfig-auto-perl (0.44-1) ... Setting up g++-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Setting up libdebian-dpkgcross-perl (2.6.15-3) ... Setting up g++-arm-linux-gnueabihf (4:8.3.0-1) ... Setting up dpkg-cross (2.6.15-3) ... Setting up crossbuild-essential-armhf (12.6) ... Setting up libc6:armhf (2.28-10) ... Setting up libsepol1:armhf (2.8-1) ... Setting up libc6-dev:armhf (2.28-10) ... Setting up libpcre16-3:armhf (2:8.39-12) ... Setting up libgcc1:armhf (1:8.3.0-7) ... Setting up libsepol1-dev:armhf (2.8-1) ... Setting up zlib1g:armhf (1:1.2.11.dfsg-1) ... Setting up libffi6:armhf (3.2.1-9) ... Setting up libgomp1:armhf (8.3.0-7) ... Setting up libffi-dev:armhf (3.2.1-9) ... Setting up dh-autoreconf (19) ... Setting up libpcre3:armhf (2:8.39-12) ... Setting up libpcre32-3:armhf (2:8.39-12) ... Setting up libatomic1:armhf (8.3.0-7) ... Setting up libuuid1:armhf (2.33.1-0.1) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up libblkid1:armhf (2.33.1-0.1) ... Setting up libstdc++6:armhf (8.3.0-7) ... Setting up libpcrecpp0v5:armhf (2:8.39-12) ... Setting up libpcre3-dev:armhf (2:8.39-12) ... Setting up debhelper (12.1.1) ... Setting up libselinux1:armhf (2.8-1+b1) ... Setting up libasan5:armhf (8.3.0-7) ... Setting up uuid-dev:armhf (2.33.1-0.1) ... Setting up libubsan1:armhf (8.3.0-7) ... Setting up libmount1:armhf (2.33.1-0.1) ... Setting up libblkid-dev:armhf (2.33.1-0.1) ... Setting up libselinux1-dev:armhf (2.8-1+b1) ... Setting up libglib2.0-0:armhf (2.58.3-2) ... /var/lib/dpkg/info/libglib2.0-0:armhf.postinst: 47: /var/lib/dpkg/info/libglib2.0-0:armhf.postinst: /usr/lib/arm-linux-gnueabihf/glib-2.0/glib-compile-schemas: Exec format error /var/lib/dpkg/info/libglib2.0-0:armhf.postinst: 50: /var/lib/dpkg/info/libglib2.0-0:armhf.postinst: /usr/lib/arm-linux-gnueabihf/glib-2.0/gio-querymodules: Exec format error Setting up libgcc-8-dev:armhf (8.3.0-7) ... Setting up libvala-0.42-0:armhf (0.42.5-1) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libstdc++-8-dev:armhf (8.3.0-7) ... Setting up libglib2.0-dev:armhf (2.58.3-2) ... Setting up valac:armhf (0.42.5-1) ... Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for ccache (3.7.1-1) ... Updating symlinks in /usr/lib/ccache ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Initial Foreign Architectures: armhf Arch check ok (armhf included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64) Toolchain package versions: binutils_2.31.1-16 dpkg-dev_1.19.7 g++-8_8.3.0-7 gcc-8_8.3.0-7 libc6-dev_2.28-10 libstdc++-8-dev_8.3.0-7 libstdc++-8-dev-armhf-cross_8.3.0-7cross1 libstdc++6_8.3.0-7 libstdc++6-armhf-cross_8.3.0-7cross1 linux-libc-dev_4.19.37-5 Package versions: adduser_3.118 apt_1.8.2 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.3 base-passwd_3.5.46 bash_5.0-4 binutils_2.31.1-16 binutils-arm-linux-gnueabihf_2.31.1-16 binutils-common_2.31.1-16 binutils-x86-64-linux-gnu_2.31.1-16 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.6 bzip2_1.0.6-9.1 ccache_3.7.1-1 coreutils_8.30-3 cpp_4:8.3.0-1 cpp-8_8.3.0-7 cpp-8-arm-linux-gnueabihf_8.3.0-7cross1 cpp-arm-linux-gnueabihf_4:8.3.0-1 cross-config_2.6.15-3 crossbuild-essential-armhf_12.6 dash_0.5.10.2-5 debconf_1.5.72 debhelper_12.1.1 debian-archive-keyring_2019.1 debianutils_4.8.6.1 dh-autoreconf_19 dh-strip-nondeterminism_1.1.2-1 diffutils_1:3.7-3 dirmngr_2.2.13-2 dose-distcheck_5.0.1-12 dpkg_1.19.7 dpkg-cross_2.6.15-3 dpkg-dev_1.19.7 dwz_0.12-3 e2fsprogs_1.45.2-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-4 findutils_4.6.0+git+20190209-2 g++_4:8.3.0-1 g++-8_8.3.0-7 g++-8-arm-linux-gnueabihf_8.3.0-7cross1 g++-arm-linux-gnueabihf_4:8.3.0-1 gcc_4:8.3.0-1 gcc-8_8.3.0-7 gcc-8-arm-linux-gnueabihf_8.3.0-7cross1 gcc-8-arm-linux-gnueabihf-base_8.3.0-7cross1 gcc-8-base_8.3.0-7 gcc-8-cross-base_8.3.0-7cross1 gcc-arm-linux-gnueabihf_4:8.3.0-1 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.13-2 gnupg-l10n_2.2.13-2 gnupg-utils_2.2.13-2 gpg_2.2.13-2 gpg-agent_2.2.13-2 gpg-wks-client_2.2.13-2 gpg-wks-server_2.2.13-2 gpgconf_2.2.13-2 gpgsm_2.2.13-2 gpgv_2.2.13-2 grep_3.3-1 groff-base_1.22.4-3 gzip_1.9-3 hostname_3.21 init-system-helpers_1.57 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-4 libapt-pkg5.0_1.8.2 libarchive-zip-perl_1.64-1 libasan5_8.3.0-7 libasan5-armhf-cross_8.3.0-7cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-7 libatomic1-armhf-cross_8.3.0-7cross1 libattr1_1:2.4.48-4 libaudit-common_1:2.8.4-3 libaudit1_1:2.8.4-3 libbinutils_2.31.1-16 libblkid-dev_2.33.1-0.1 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9.1 libc-bin_2.28-10 libc-dev-bin_2.28-10 libc6_2.28-10 libc6-armhf-cross_2.28-10cross2 libc6-dev_2.28-10 libc6-dev-armhf-cross_2.28-10cross2 libcap-ng0_0.7.9-2 libcap2_1:2.25-2 libcc1-0_8.3.0-7 libcom-err2_1.45.2-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libdb5.3_5.3.28+dfsg1-0.6 libdebconfclient0_0.249 libdebian-dpkgcross-perl_2.6.15-3 libdpkg-perl_1.19.7 libeatmydata1_105-7 libelf1_0.176-1.1 libexpat1_2.2.6-2 libext2fs2_1.45.2-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi-dev_3.2.1-9 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-stripnondeterminism-perl_1.1.2-1 libfile-which-perl_1.23-1 libgcc-8-dev_8.3.0-7 libgcc-8-dev-armhf-cross_8.3.0-7cross1 libgcc1_1:8.3.0-7 libgcc1-armhf-cross_1:8.3.0-7cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-4 libgdbm6_1.18.1-4 libglib2.0-0_2.58.3-2 libglib2.0-bin_2.58.3-2 libglib2.0-data_2.58.3-2 libglib2.0-dev_2.58.3-2 libglib2.0-dev-bin_2.58.3-2 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.7-4 libgomp1_8.3.0-7 libgomp1-armhf-cross_8.3.0-7cross1 libgpg-error0_1.35-1 libhogweed4_3.4.1-1 libicu63_63.2-2 libidn2-0_2.0.5-1 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_8.3.0-7 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-7 liblua5.2-0_5.2.4-1.1+b2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-4 libmagic1_1:5.35-4 libmount-dev_2.33.1-0.1 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpdec2_2.4.2-2 libmpfr6_4.0.2-1 libmpx2_8.3.0-7 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnettle6_3.4.1-1 libnpth0_1.6-1 libnspr4_2:4.21-1 libnss3_2:3.44+really3.42.1-2 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre16-3_2:8.39-12 libpcre3_2:8.39-12 libpcre3-dev_2:8.39-12 libpcre32-3_2:8.39-12 libpcrecpp0v5_2:8.39-12 libperl5.28_5.28.1-6 libpipeline1_1.5.1-2 libpopt0_1.16-12 libpython3-stdlib_3.7.3-1 libpython3.7-minimal_3.7.3-2 libpython3.7-stdlib_3.7.3-2 libquadmath0_8.3.0-7 libreadline7_7.0-5 librpm8_4.14.2.1+dfsg1-1 librpmio8_4.14.2.1+dfsg1-1 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libselinux1-dev_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsepol1-dev_2.8-1 libsigsegv2_2.12-2 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-3 libss2_1.45.2-1 libssl1.1_1.1.1c-1 libstdc++-8-dev_8.3.0-7 libstdc++-8-dev-armhf-cross_8.3.0-7cross1 libstdc++6_8.3.0-7 libstdc++6-armhf-cross_8.3.0-7cross1 libsystemd0_241-5 libtasn1-6_4.13-3 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtsan0_8.3.0-7 libubsan1_8.3.0-7 libubsan1-armhf-cross_8.3.0-7cross1 libuchardet0_0.0.6-3 libudev1_241-5 libunistring2_0.9.10-1 libuuid1_2.33.1-0.1 libvala-0.42-0_0.42.5-1 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-sax-base-perl_1.09-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.37-5 linux-libc-dev-armhf-cross_4.19.28-2cross2 login_1:4.5-1.1 lsb-base_10.2019051400 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mawk_1.3.3-17+b3 mime-support_3.62 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 passwd_1:4.5-1.1 patch_2.7.6-4 perl_5.28.1-6 perl-base_5.28.1-6 perl-modules-5.28_5.28.1-6 pinentry-curses_1.1.0-2 pkg-config_0.29-6 po-debconf_1.0.21 python3_3.7.3-1 python3-distutils_3.7.3-1 python3-lib2to3_3.7.3-1 python3-minimal_3.7.3-1 python3.7_3.7.3-2 python3.7-minimal_3.7.3-2 readline-common_7.0-5 sbuild-build-depends-dose3-dummy_0.invalid.0 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-6 tzdata_2019a-1 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-dev_2.33.1-0.1 valac_0.42.5-1 valac-0.42-vapi_0.42.5-1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1 zlib1g-dev_1:1.2.11.dfsg-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libgsecuredelete Binary: libgsecuredelete0, libgsecuredelete-dev Architecture: any Version: 0.3-1 Maintainer: Debian Privacy Tools Maintainers Uploaders: intrigeri Homepage: https://wipetools.tuxfamily.org/libgsecuredelete.html Standards-Version: 3.9.8 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-privacy/packages/libgsecuredelete.git Vcs-Git: https://anonscm.debian.org/git/pkg-privacy/packages/libgsecuredelete.git Build-Depends: debhelper (>= 9), dh-autoreconf, dpkg-dev (>= 1.16.1.1~), libglib2.0-dev, valac Package-List: libgsecuredelete-dev deb libdevel optional arch=any libgsecuredelete0 deb libs optional arch=any Checksums-Sha1: 03123889392aa593f10a48cdadef13762cf44c89 457222 libgsecuredelete_0.3.orig.tar.gz 76622551f0d871a79127ce8abedd006516f065d5 7524 libgsecuredelete_0.3-1.debian.tar.xz Checksums-Sha256: c158b51f94fad07f201e88cb8e83bdbde70a15c6d8539a213f12145b3e36040e 457222 libgsecuredelete_0.3.orig.tar.gz 36f696d8be9077b0ea6071d6433baf8e96542838abc7a8075ddda4bf497731c3 7524 libgsecuredelete_0.3-1.debian.tar.xz Files: 9facf940b239679af1a93df69ff15ae1 457222 libgsecuredelete_0.3.orig.tar.gz aa59589ebdd7f501182170b5e47c3a0d 7524 libgsecuredelete_0.3-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEE5UP557t8LGTy13pc7G2Dvyn8Ko4FAlhIWBQACgkQ7G2Dvyn8 Ko7j9BAAiHUBr00IpQsR78pAcOVIsksuXKJpOe29RmO1g+JRbOjsPHWYj+QZcITD qOcL0ViA2Kb06FZFe3XRE7SBJrO2TmmuXUckHE1Ii+XKeg7Fi1hxk7NSkHwlgpLi uhXTb42CttmLQgGMrJAgpOinRrwnADisJbE0yG6ab9Wt/VJ9n3w+HTS+GhBrvMzn XMiusPYI9xSsJ7oe16ZP/rA5RdJ3/X7lOZ0k/FFmpLnEuvkKBdqNViBUz8BIsrK+ 0HTutxTXZwPQZHO8fUAhMFMOTCNhsQlbjO+y9MZFk05r/2jqP6Pjm4Z4WKSi2iEK rYaaOm7es+Xy3nwWu52UzwuewttPRJMcUV3NDPdIbEmnpkdbfzPbekONafQE9Tam b1pvwXdP3zxcwoEliwX6ZrpiBUOExeJv9jtZ0OB6GwfiEBsv4InV4BzUV3pDL8Zt coiYrD5l4qg1FoT7weuGwuk8YzG2eY2V1kNm4I871mJ8PHa6va8J8ZYmjSxYs9d5 y67NxWn+vyqFJLS70I/7vFufmZPdVaKPgm8RqygC0j5IHyinbaeOCIJp8x+uyW9R j/TiH3rGmqLil9z2UxX/fMsnGMLaPWAiSBxYChB3O2d/ZDBltleK7QbObmlH0/zF pnlwJnUllYUWdz+IfD2LIwPpri93pwMIepvt37YHAUKolAL9NrU= =Adk3 -----END PGP SIGNATURE----- gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Wed Dec 7 18:42:28 2016 UTC gpgv: using RSA key E543F9E7BB7C2C64F2D77A5CEC6D83BF29FC2A8E gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libgsecuredelete_0.3-1.dsc dpkg-source: info: extracting libgsecuredelete in /<> dpkg-source: info: unpacking libgsecuredelete_0.3.orig.tar.gz dpkg-source: info: unpacking libgsecuredelete_0.3-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-configure.ac-set-AM_GNU_GETTEXT_VERSION-0.19.patch Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf CCACHE_COMPRESS=1 CCACHE_DIR=/var/cache/ccache-sbuild CCACHE_UMASK=002 CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf DEB_BUILD_OPTIONS=nocheck HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=build PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=1000 SCHROOT_GROUP=build SCHROOT_SESSION_ID=unstable-amd64-sbuild-8ec62896-5f31-4f87-802e-f820bde7c60d SCHROOT_UID=1000 SCHROOT_USER=build SHELL=/bin/sh USER=build dpkg-buildpackage ----------------- Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16 dpkg-buildpackage: info: source package libgsecuredelete dpkg-buildpackage: info: source version 0.3-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by intrigeri dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --with autoreconf dh_clean debian/rules build-arch dh build-arch --with autoreconf dh_update_autotools_config -a dh_autoreconf -a Copying file ABOUT-NLS Copying file build/aux/config.rpath Copying file build/m4/codeset.m4 Copying file build/m4/extern-inline.m4 Copying file build/m4/fcntl-o.m4 Copying file build/m4/glibc2.m4 Copying file build/m4/glibc21.m4 Copying file build/m4/intdiv0.m4 Copying file build/m4/intl.m4 Copying file build/m4/intldir.m4 Copying file build/m4/intlmacosx.m4 Copying file build/m4/intmax.m4 Copying file build/m4/inttypes-pri.m4 Copying file build/m4/inttypes_h.m4 Copying file build/m4/lcmessage.m4 Copying file build/m4/lock.m4 Copying file build/m4/longlong.m4 Copying file build/m4/printf-posix.m4 Copying file build/m4/size_max.m4 Copying file build/m4/stdint_h.m4 Copying file build/m4/threadlib.m4 Copying file build/m4/uintmax_t.m4 Copying file build/m4/visibility.m4 Copying file build/m4/wchar_t.m4 Copying file build/m4/wint_t.m4 Copying file build/m4/xsize.m4 Copying file po/Makefile.in.in Copying file po/Makevars.template Copying file po/Rules-quot libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build/aux'. libtoolize: copying file 'build/aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build/m4'. libtoolize: copying file 'build/m4/libtool.m4' libtoolize: copying file 'build/m4/ltoptions.m4' libtoolize: copying file 'build/m4/ltsugar.m4' libtoolize: copying file 'build/m4/ltversion.m4' libtoolize: copying file 'build/m4/lt~obsolete.m4' configure.ac:29: installing 'build/aux/compile' configure.ac:10: installing 'build/aux/missing' docs/Makefile.am:16: warning: VALA_PACKAGES:%=--pkg=%: non-POSIX variable name gsecuredelete/Makefile.am:7: warning: VALA_PACKAGES:%=--pkg=%: non-POSIX variable name gsecuredelete/Makefile.am: installing 'build/aux/depcomp' dh_auto_configure -a ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking --host=arm-linux-gnueabihf configure: WARNING: unrecognized options: --disable-maintainer-mode configure: loading site script /etc/dpkg-cross/cross-config.armhf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-gnueabihf-strip... arm-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for arm-linux-gnueabihf-gcc... arm-linux-gnueabihf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-linux-gnueabihf-gcc accepts -g... yes checking for arm-linux-gnueabihf-gcc option to accept ISO C89... none needed checking whether arm-linux-gnueabihf-gcc understands -c and -o together... yes checking dependency style of arm-linux-gnueabihf-gcc... none checking for arm-linux-gnueabihf-ar... arm-linux-gnueabihf-ar checking the archiver (arm-linux-gnueabihf-ar) interface... ar checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnueabihf checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by arm-linux-gnueabihf-gcc... /usr/arm-linux-gnueabihf/bin/ld checking if the linker (/usr/arm-linux-gnueabihf/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/arm-linux-gnueabihf-nm -B checking the name lister (/usr/bin/arm-linux-gnueabihf-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/arm-linux-gnueabihf/bin/ld option to reload object files... -r checking for arm-linux-gnueabihf-objdump... arm-linux-gnueabihf-objdump checking how to recognize dependent libraries... pass_all checking for arm-linux-gnueabihf-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-linux-gnueabihf-ar... (cached) arm-linux-gnueabihf-ar checking for archiver @FILE support... @ checking for arm-linux-gnueabihf-strip... (cached) arm-linux-gnueabihf-strip checking for arm-linux-gnueabihf-ranlib... arm-linux-gnueabihf-ranlib checking command to parse /usr/bin/arm-linux-gnueabihf-nm -B output from arm-linux-gnueabihf-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-linux-gnueabihf-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... arm-linux-gnueabihf-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no checking for arm-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC checking if arm-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes checking if arm-linux-gnueabihf-gcc static flag -static works... yes checking if arm-linux-gnueabihf-gcc supports -c -o file.o... yes checking if arm-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes checking whether the arm-linux-gnueabihf-gcc linker (/usr/arm-linux-gnueabihf/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for a sed that does not truncate output... (cached) /bin/sed checking for valac... /usr/bin/valac checking whether /usr/bin/valac is at least version 0.14.2... ./configure: line 9077: /usr/bin/valac: cannot execute binary file: Exec format error no configure: WARNING: no proper vala compiler found configure: WARNING: you will not be able to compile vala source files checking for valadoc... NONE checking for srm... /usr/bin/srm checking for sfill... /usr/bin/sfill checking for smem... /usr/bin/smem checking for sswap... /usr/bin/sswap checking for arm-linux-gnueabihf-pkg-config... /usr/bin/arm-linux-gnueabihf-pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking for GOBJECT... yes checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for ld used by arm-linux-gnueabihf-gcc... /usr/arm-linux-gnueabihf/bin/ld checking if the linker (/usr/arm-linux-gnueabihf/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating gsecuredelete/Makefile config.status: creating docs/Makefile config.status: creating po/Makefile.in config.status: creating gsecuredelete.pc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile configure: WARNING: unrecognized options: --disable-maintainer-mode debian/rules override_dh_auto_build make[1]: Entering directory '/<>' dh_auto_build -- pkglibexecdir=/usr/lib/libgsecuredelete0/libexec make -j1 pkglibexecdir=/usr/lib/libgsecuredelete0/libexec make[2]: Entering directory '/<>' make all-recursive make[3]: Entering directory '/<>' Making all in gsecuredelete make[4]: Entering directory '/<>/gsecuredelete' rm -f test_vala.stamp && echo stamp > test_vala.stamp-t CDPATH="${ZSH_VERSION+.}:" && cd . && valac --pkg=glib-2.0 --pkg=posix --vapidir=. --pkg=gsecuredelete -C main.vala /bin/bash: /usr/bin/valac: cannot execute binary file: Exec format error make[4]: *** [Makefile:571: test_vala.stamp] Error 126 make[4]: Leaving directory '/<>/gsecuredelete' make[3]: *** [Makefile:554: all-recursive] Error 1 make[3]: Leaving directory '/<>' make[2]: *** [Makefile:428: all] Error 2 make[2]: Leaving directory '/<>' dh_auto_build: make -j1 pkglibexecdir=/usr/lib/libgsecuredelete0/libexec returned exit code 2 make[1]: *** [debian/rules:8: override_dh_auto_build] Error 2 make[1]: Leaving directory '/<>' make: *** [debian/rules:17: build-arch] Error 2 dpkg-buildpackage: error: debian/rules build-arch subprocess returned exit status 2 -------------------------------------------------------------------------------- Build finished at 2019-07-02T03:10:18Z Finished -------- +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: sensible-utils Use 'apt autoremove' to remove it. The following packages will be REMOVED: autoconf* automake* autopoint* autotools-dev* binutils-arm-linux-gnueabihf* bsdmainutils* cpp-8-arm-linux-gnueabihf* cpp-arm-linux-gnueabihf* cross-config* crossbuild-essential-armhf* debhelper* dh-autoreconf* dh-strip-nondeterminism* dpkg-cross* dwz* file* g++-8-arm-linux-gnueabihf* g++-arm-linux-gnueabihf* gcc-8-arm-linux-gnueabihf* gcc-8-arm-linux-gnueabihf-base* gcc-8-base:armhf* gcc-8-cross-base* gcc-arm-linux-gnueabihf* gettext* gettext-base* groff-base* intltool-debian* libarchive-zip-perl* libasan5:armhf* libasan5-armhf-cross* libatomic1:armhf* libatomic1-armhf-cross* libblkid-dev:armhf* libblkid1:armhf* libbsd0* libc6:armhf* libc6-armhf-cross* libc6-dev:armhf* libc6-dev-armhf-cross* libconfig-auto-perl* libconfig-inifiles-perl* libcroco3* libdebian-dpkgcross-perl* libexpat1* libffi-dev:armhf* libffi6:armhf* libfile-homedir-perl* libfile-stripnondeterminism-perl* libfile-which-perl* libgcc-8-dev:armhf* libgcc-8-dev-armhf-cross* libgcc1:armhf* libgcc1-armhf-cross* libglib2.0-0* libglib2.0-0:armhf* libglib2.0-bin* libglib2.0-data* libglib2.0-dev:armhf* libglib2.0-dev-bin* libgomp1:armhf* libgomp1-armhf-cross* libicu63* libio-string-perl* liblocale-gettext-perl* libmagic-mgc* libmagic1* libmount-dev:armhf* libmount1:armhf* libmpdec2* libncurses6* libpcre16-3:armhf* libpcre3:armhf* libpcre3-dev:armhf* libpcre32-3:armhf* libpcrecpp0v5:armhf* libpipeline1* libpython3-stdlib* libpython3.7-minimal* libpython3.7-stdlib* libselinux1:armhf* libselinux1-dev:armhf* libsepol1:armhf* libsepol1-dev:armhf* libsigsegv2* libssl1.1* libstdc++-8-dev:armhf* libstdc++-8-dev-armhf-cross* libstdc++6:armhf* libstdc++6-armhf-cross* libtool* libubsan1:armhf* libubsan1-armhf-cross* libuchardet0* libuuid1:armhf* libvala-0.42-0:armhf* libxml-libxml-perl* libxml-namespacesupport-perl* libxml-sax-base-perl* libxml-sax-perl* libxml-simple-perl* libxml2* libyaml-perl* linux-libc-dev:armhf* linux-libc-dev-armhf-cross* m4* man-db* mime-support* pkg-config* po-debconf* python3* python3-distutils* python3-lib2to3* python3-minimal* python3.7* python3.7-minimal* sbuild-build-depends-main-dummy:armhf* ucf* uuid-dev:armhf* valac:armhf* valac-0.42-vapi* zlib1g:armhf* zlib1g-dev:armhf* 0 upgraded, 0 newly installed, 122 to remove and 0 not upgraded. After this operation, 298 MB disk space will be freed. (Reading database ... 20439 files and directories currently installed.) Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Removing crossbuild-essential-armhf (12.6) ... Removing g++-arm-linux-gnueabihf (4:8.3.0-1) ... Removing gcc-arm-linux-gnueabihf (4:8.3.0-1) ... Removing g++-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Removing gcc-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Removing binutils-arm-linux-gnueabihf (2.31.1-16) ... Removing cpp-arm-linux-gnueabihf (4:8.3.0-1) ... Removing cpp-8-arm-linux-gnueabihf (8.3.0-7cross1) ... Removing dpkg-cross (2.6.15-3) ... Removing cross-config (2.6.15-3) ... Removing libdebian-dpkgcross-perl (2.6.15-3) ... Removing gcc-8-arm-linux-gnueabihf-base:amd64 (8.3.0-7cross1) ... Removing libstdc++-8-dev:armhf (8.3.0-7) ... Removing libgcc-8-dev:armhf (8.3.0-7) ... Removing libubsan1:armhf (8.3.0-7) ... Removing valac:armhf (0.42.5-1) ... Removing libglib2.0-dev:armhf (2.58.3-2) ... Removing libselinux1-dev:armhf (2.8-1+b1) ... Removing libpcre3-dev:armhf (2:8.39-12) ... Removing libpcrecpp0v5:armhf (2:8.39-12) ... Removing libstdc++-8-dev-armhf-cross (8.3.0-7cross1) ... Removing libgcc-8-dev-armhf-cross (8.3.0-7cross1) ... Removing libubsan1-armhf-cross (8.3.0-7cross1) ... Removing libasan5-armhf-cross (8.3.0-7cross1) ... Removing libstdc++6-armhf-cross (8.3.0-7cross1) ... Removing libasan5:armhf (8.3.0-7) ... Removing libatomic1:armhf (8.3.0-7) ... Removing libatomic1-armhf-cross (8.3.0-7cross1) ... Removing libmount-dev:armhf (2.33.1-0.1) ... Removing libblkid-dev:armhf (2.33.1-0.1) ... Removing libvala-0.42-0:armhf (0.42.5-1) ... Removing libglib2.0-0:armhf (2.58.3-2) ... Removing libmount1:armhf (2.33.1-0.1) ... Removing libblkid1:armhf (2.33.1-0.1) ... Removing zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Removing zlib1g:armhf (1:1.2.11.dfsg-1) ... Removing uuid-dev:armhf (2.33.1-0.1) ... Removing libuuid1:armhf (2.33.1-0.1) ... Removing libc6-dev-armhf-cross (2.28-10cross2) ... Removing libgomp1-armhf-cross (8.3.0-7cross1) ... Removing libc6-dev:armhf (2.28-10) ... Removing libconfig-auto-perl (0.44-1) ... Removing libconfig-inifiles-perl (3.000001-1) ... Removing libglib2.0-dev-bin (2.58.3-2) ... Removing python3-distutils (3.7.3-1) ... Removing python3-lib2to3 (3.7.3-1) ... Removing python3 (3.7.3-1) ... Removing python3.7 (3.7.3-2) ... Removing python3-minimal (3.7.3-1) ... Removing python3.7-minimal (3.7.3-2) ... Removing libexpat1:amd64 (2.2.6-2) ... Removing libffi-dev:armhf (3.2.1-9) ... Removing libffi6:armhf (3.2.1-9) ... Removing libfile-homedir-perl (1.004-1) ... Removing libfile-which-perl (1.23-1) ... Removing libgcc1-armhf-cross (1:8.3.0-7cross1) ... Removing pkg-config (0.29-6) ... Removing libglib2.0-bin (2.58.3-2) ... Removing libglib2.0-data (2.58.3-2) ... Removing libgomp1:armhf (8.3.0-7) ... Removing libxml-simple-perl (2.25-1) ... Removing libxml-libxml-perl (2.0134+dfsg-1) ... update-perl-sax-parsers: Unregistering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Unregistering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Removing libio-string-perl (1.08-3) ... Removing liblocale-gettext-perl (1.07-3+b4) ... Removing libpython3-stdlib:amd64 (3.7.3-1) ... Removing libpython3.7-stdlib:amd64 (3.7.3-2) ... find: ‘/usr/lib/python3’: No such file or directory Removing libmpdec2:amd64 (2.4.2-2) ... Removing libpcre16-3:armhf (2:8.39-12) ... Removing libselinux1:armhf (2.8-1+b1) ... Removing libpcre3:armhf (2:8.39-12) ... Removing libpcre32-3:armhf (2:8.39-12) ... Removing libpython3.7-minimal:amd64 (3.7.3-2) ... find: ‘/usr/lib/python3’: No such file or directory Removing libsepol1-dev:armhf (2.8-1) ... Removing libsepol1:armhf (2.8-1) ... Removing libssl1.1:amd64 (1.1.1c-1) ... Removing libxml-sax-perl (1.00+dfsg-1) ... update-perl-sax-parsers: Unregistering Perl SAX parser XML::SAX::PurePerl with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Removing libxml-namespacesupport-perl (1.12-1) ... Removing libxml-sax-base-perl (1.09-1) ... Removing libyaml-perl (1.27-1) ... Removing linux-libc-dev:armhf (4.19.37-5) ... Removing linux-libc-dev-armhf-cross (4.19.28-2cross2) ... Removing mime-support (3.62) ... Removing ucf (3.0038+nmu1) ... Removing valac-0.42-vapi (0.42.5-1) ... Removing libstdc++6:armhf (8.3.0-7) ... Removing gcc-8-cross-base (8.3.0-7cross1) ... Removing libc6-armhf-cross (2.28-10cross2) ... Removing dh-autoreconf (19) ... Removing debhelper (12.1.1) ... Removing dh-strip-nondeterminism (1.1.2-1) ... Removing automake (1:1.16.1-4) ... Removing autoconf (2.69-11) ... Removing autopoint (0.19.8.1-9) ... Removing libtool (2.4.6-10) ... Removing autotools-dev (20180224.1) ... Removing man-db (2.8.5-2) ... Removing bsdmainutils (11.1.2+b1) ... Removing dwz (0.12-3) ... Removing file (1:5.35-4) ... Removing po-debconf (1.0.21) ... Removing intltool-debian (0.35.0+20060710.5) ... Removing gettext (0.19.8.1-9) ... Removing gettext-base (0.19.8.1-9) ... Removing groff-base (1.22.4-3) ... Removing libfile-stripnondeterminism-perl (1.1.2-1) ... Removing libarchive-zip-perl (1.64-1) ... Removing libbsd0:amd64 (0.9.1-2) ... Removing libc6:armhf (2.28-10) ... Removing libcroco3:amd64 (0.6.12-3) ... Removing libgcc1:armhf (1:8.3.0-7) ... Removing libglib2.0-0:amd64 (2.58.3-2) ... Removing libxml2:amd64 (2.9.4+dfsg1-7+b3) ... Removing libicu63:amd64 (63.2-2) ... Removing libmagic1:amd64 (1:5.35-4) ... Removing libmagic-mgc (1:5.35-4) ... Removing libncurses6:amd64 (6.1+20181013-2) ... Removing libpipeline1:amd64 (1.5.1-2) ... Removing m4 (1.4.18-2) ... Removing libsigsegv2:amd64 (2.12-2) ... Removing libuchardet0:amd64 (0.0.6-3) ... Removing gcc-8-base:armhf (8.3.0-7) ... Processing triggers for ccache (3.7.1-1) ... Updating symlinks in /usr/lib/ccache ... Processing triggers for libc-bin (2.28-10) ... (Reading database ... 12510 files and directories currently installed.) Purging configuration files for libblkid-dev:armhf (2.33.1-0.1) ... Purging configuration files for mime-support (3.62) ... Purging configuration files for libglib2.0-0:amd64 (2.58.3-2) ... Purging configuration files for libglib2.0-0:armhf (2.58.3-2) ... Purging configuration files for libssl1.1:amd64 (1.1.1c-1) ... Purging configuration files for libmagic1:amd64 (1:5.35-4) ... Purging configuration files for python3 (3.7.3-1) ... Purging configuration files for man-db (2.8.5-2) ... Purging configuration files for libpython3.7-minimal:amd64 (3.7.3-2) ... Purging configuration files for libxml-sax-perl (1.00+dfsg-1) ... Purging configuration files for cross-config (2.6.15-3) ... Purging configuration files for bsdmainutils (11.1.2+b1) ... Purging configuration files for pkg-config (0.29-6) ... Purging configuration files for ucf (3.0038+nmu1) ... Purging configuration files for python3.7-minimal (3.7.3-2) ... Purging configuration files for autoconf (2.69-11) ... Purging configuration files for libc6:armhf (2.28-10) ... Purging configuration files for groff-base (1.22.4-3) ... Purging configuration files for dpkg-cross (2.6.15-3) ... Purging configuration files for libdebian-dpkgcross-perl (2.6.15-3) ... E: Build failure (dpkg-buildpackage died) +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any Build-Space: n/a Build-Time: 39 Distribution: unstable-amd64-sbuild Fail-Stage: build Foreign Architectures: armhf Host Architecture: armhf Install-Time: 27 Job: /home/build/sbuild-setup/repo/pool/main/libg/libgsecuredelete/libgsecuredelete_0.3-1.dsc Machine Architecture: amd64 Package: libgsecuredelete Package-Time: 72 Source-Version: 0.3-1 Space: n/a Status: attempted Version: 0.3-1 -------------------------------------------------------------------------------- Finished at 2019-07-02T03:10:18Z Build needed 00:01:12, no disk space