sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 36857dea695f +==============================================================================+ | libnatpmp 20150609-7 (armhf) Tue, 05 Mar 2019 02:15:50 +0000 | +==============================================================================+ Package: libnatpmp Version: 20150609-7 Source Version: 20150609-7 Distribution: unstable-amd64-sbuild Machine Architecture: amd64 Host Architecture: armhf Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-7c062f37-85a7-4f8c-a41a-2555b18e3424' with '<>' I: NOTICE: Log filtering will replace 'build/libnatpmp-4zi7bd/resolver-tLXq61' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Hit:1 http://10.116.41.102/debian sid InRelease Hit:2 http://cdn-fastly.deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /home/build/sbuild-setup/repo/pool/main/libn/libnatpmp/libnatpmp_20150609-7.dsc exists in /home/build/sbuild-setup/repo/pool/main/libn/libnatpmp; copying to chroot I: NOTICE: Log filtering will replace 'build/libnatpmp-4zi7bd/libnatpmp-20150609' with '<>' I: NOTICE: Log filtering will replace 'build/libnatpmp-4zi7bd' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper (>= 12~), dh-python, libpython3-dev, python3-dev:any, python3-setuptools, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf Filtered Build-Depends: debhelper (>= 12~), dh-python, libpython3-dev, python3-dev:any, python3-setuptools, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [424 B] Get:5 copy:/<>/apt_archive ./ Packages [513 B] Fetched 1894 B in 0s (131 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-python dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libbsd0 libbz2-1.0:armhf libc6:armhf libc6-dev:armhf libcroco3 libdb5.3:armhf libelf1 libexpat1:armhf libexpat1-dev libexpat1-dev:armhf libffi6:armhf libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf liblzma5:armhf libmpdec2 libmpdec2:armhf libncurses6 libncursesw6:armhf libpipeline1 libpython3-dev libpython3-dev:armhf libpython3-stdlib libpython3.7 libpython3.7:armhf libpython3.7-dev libpython3.7-dev:armhf libpython3.7-minimal libpython3.7-minimal:armhf libpython3.7-stdlib libpython3.7-stdlib:armhf libreadline7:armhf libsigsegv2 libsqlite3-0:armhf libssl1.1:armhf libstdc++-8-dev:armhf libstdc++6:armhf libtinfo6:armhf libtool libubsan1:armhf libuchardet0 libuuid1:armhf linux-libc-dev:armhf m4 man-db mime-support po-debconf python3 python3-dev python3-distutils python3-lib2to3 python3-minimal python3-pkg-resources python3-setuptools python3.7 python3.7-dev python3.7-minimal zlib1g:armhf Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf libstdc++-8-doc:armhf libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl python3-doc python3-tk python3-venv python-setuptools-doc python3.7-venv python3.7-doc binfmt-support Recommended packages: curl | wget | lynx libidn2-0:armhf libarchive-cpio-perl libglib2.0-data shared-mime-info xdg-user-dirs libgpm2 libgpm2:armhf libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-python dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libbsd0 libbz2-1.0:armhf libc6:armhf libc6-dev:armhf libcroco3 libdb5.3:armhf libelf1 libexpat1:armhf libexpat1-dev libexpat1-dev:armhf libffi6:armhf libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf liblzma5:armhf libmpdec2 libmpdec2:armhf libncurses6 libncursesw6:armhf libpipeline1 libpython3-dev libpython3-dev:armhf libpython3-stdlib libpython3.7 libpython3.7:armhf libpython3.7-dev libpython3.7-dev:armhf libpython3.7-minimal libpython3.7-minimal:armhf libpython3.7-stdlib libpython3.7-stdlib:armhf libreadline7:armhf libsigsegv2 libsqlite3-0:armhf libssl1.1:armhf libstdc++-8-dev:armhf libstdc++6:armhf libtinfo6:armhf libtool libubsan1:armhf libuchardet0 libuuid1:armhf linux-libc-dev:armhf m4 man-db mime-support po-debconf python3 python3-dev python3-distutils python3-lib2to3 python3-minimal python3-pkg-resources python3-setuptools python3.7 python3.7-dev python3.7-minimal sbuild-build-depends-main-dummy:armhf zlib1g:armhf 0 upgraded, 79 newly installed, 0 to remove and 0 not upgraded. Need to get 98.1 MB/129 MB of archives. After this operation, 288 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [936 B] Get:2 http://10.116.41.102/debian sid/main amd64 libexpat1-dev amd64 2.2.6-1 [152 kB] Get:3 http://10.116.41.102/debian sid/main armhf libpython3.7-dev armhf 3.7.2-2 [47.2 MB] Get:4 http://10.116.41.102/debian sid/main armhf libpython3-dev armhf 3.7.2-1 [20.1 kB] Get:5 http://10.116.41.102/debian sid/main amd64 libpython3.7 amd64 3.7.2-2 [1494 kB] Get:6 http://10.116.41.102/debian sid/main amd64 libpython3.7-dev amd64 3.7.2-2 [48.4 MB] Get:7 http://10.116.41.102/debian sid/main amd64 libpython3-dev amd64 3.7.2-1 [20.1 kB] Get:8 http://10.116.41.102/debian sid/main amd64 python3.7-dev amd64 3.7.2-2 [509 kB] Get:9 http://10.116.41.102/debian sid/main amd64 python3-dev amd64 3.7.2-1 [1256 B] Get:10 http://10.116.41.102/debian sid/main amd64 python3-setuptools all 40.8.0-1 [306 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 98.1 MB in 9s (11.2 MB/s) Selecting previously unselected package libbsd0:amd64. (Reading database ... 16440 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../2-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-2_amd64.deb ... Unpacking groff-base (1.22.4-2) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../4-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libpython3.7-minimal:amd64. Preparing to unpack .../6-libpython3.7-minimal_3.7.2-2_amd64.deb ... Unpacking libpython3.7-minimal:amd64 (3.7.2-2) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../7-python3.7-minimal_3.7.2-2_amd64.deb ... Unpacking python3.7-minimal (3.7.2-2) ... Setting up libpython3.7-minimal:amd64 (3.7.2-2) ... Setting up python3.7-minimal (3.7.2-2) ... Selecting previously unselected package python3-minimal. (Reading database ... 17315 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.2-1_amd64.deb ... Unpacking python3-minimal (3.7.2-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:amd64. Preparing to unpack .../2-libmpdec2_2.4.2-2_amd64.deb ... Unpacking libmpdec2:amd64 (2.4.2-2) ... Selecting previously unselected package libpython3.7-stdlib:amd64. Preparing to unpack .../3-libpython3.7-stdlib_3.7.2-2_amd64.deb ... Unpacking libpython3.7-stdlib:amd64 (3.7.2-2) ... Selecting previously unselected package python3.7. Preparing to unpack .../4-python3.7_3.7.2-2_amd64.deb ... Unpacking python3.7 (3.7.2-2) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../5-libpython3-stdlib_3.7.2-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.7.2-1) ... Setting up python3-minimal (3.7.2-1) ... Selecting previously unselected package python3. (Reading database ... 17749 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.2-1_amd64.deb ... Unpacking python3 (3.7.2-1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../01-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../02-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../03-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../04-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../05-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../06-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../07-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../08-libtool_2.4.6-10_all.deb ... Unpacking libtool (2.4.6-10) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../09-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../10-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../11-libfile-stripnondeterminism-perl_1.1.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../12-dh-strip-nondeterminism_1.1.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../13-libelf1_0.176-1_amd64.deb ... Unpacking libelf1:amd64 (0.176-1) ... Selecting previously unselected package dwz. Preparing to unpack .../14-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../15-libglib2.0-0_2.58.3-1_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-1) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../16-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../17-libncurses6_6.1+20181013-2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2) ... Selecting previously unselected package gettext. Preparing to unpack .../18-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../19-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../20-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../21-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../22-python3-lib2to3_3.7.2-3_all.deb ... Unpacking python3-lib2to3 (3.7.2-3) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../23-python3-distutils_3.7.2-3_all.deb ... Unpacking python3-distutils (3.7.2-3) ... Selecting previously unselected package dh-python. Preparing to unpack .../24-dh-python_3.20180927_all.deb ... Unpacking dh-python (3.20180927) ... Selecting previously unselected package gcc-8-base:armhf. Preparing to unpack .../25-gcc-8-base_8.3.0-2_armhf.deb ... Unpacking gcc-8-base:armhf (8.3.0-2) ... Selecting previously unselected package libgcc1:armhf. Preparing to unpack .../26-libgcc1_1%3a8.3.0-2_armhf.deb ... Unpacking libgcc1:armhf (1:8.3.0-2) ... Selecting previously unselected package libc6:armhf. Preparing to unpack .../27-libc6_2.28-7_armhf.deb ... Unpacking libc6:armhf (2.28-7) ... Selecting previously unselected package libstdc++6:armhf. Preparing to unpack .../28-libstdc++6_8.3.0-2_armhf.deb ... Unpacking libstdc++6:armhf (8.3.0-2) ... Selecting previously unselected package libasan5:armhf. Preparing to unpack .../29-libasan5_8.3.0-2_armhf.deb ... Unpacking libasan5:armhf (8.3.0-2) ... Selecting previously unselected package libatomic1:armhf. Preparing to unpack .../30-libatomic1_8.3.0-2_armhf.deb ... Unpacking libatomic1:armhf (8.3.0-2) ... Selecting previously unselected package libbz2-1.0:armhf. Preparing to unpack .../31-libbz2-1.0_1.0.6-9_armhf.deb ... Unpacking libbz2-1.0:armhf (1.0.6-9) ... Selecting previously unselected package linux-libc-dev:armhf. Preparing to unpack .../32-linux-libc-dev_4.19.20-1_armhf.deb ... Unpacking linux-libc-dev:armhf (4.19.20-1) ... Selecting previously unselected package libc6-dev:armhf. Preparing to unpack .../33-libc6-dev_2.28-7_armhf.deb ... Unpacking libc6-dev:armhf (2.28-7) ... Selecting previously unselected package libdb5.3:armhf. Preparing to unpack .../34-libdb5.3_5.3.28+dfsg1-0.5_armhf.deb ... Unpacking libdb5.3:armhf (5.3.28+dfsg1-0.5) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../35-libexpat1_2.2.6-1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-1) ... Selecting previously unselected package libexpat1-dev:armhf. Preparing to unpack .../36-libexpat1-dev_2.2.6-1_armhf.deb ... Unpacking libexpat1-dev:armhf (2.2.6-1) ... Selecting previously unselected package libexpat1-dev:amd64. Preparing to unpack .../37-libexpat1-dev_2.2.6-1_amd64.deb ... Unpacking libexpat1-dev:amd64 (2.2.6-1) ... Selecting previously unselected package libffi6:armhf. Preparing to unpack .../38-libffi6_3.2.1-9_armhf.deb ... Unpacking libffi6:armhf (3.2.1-9) ... Selecting previously unselected package libgomp1:armhf. Preparing to unpack .../39-libgomp1_8.3.0-2_armhf.deb ... Unpacking libgomp1:armhf (8.3.0-2) ... Selecting previously unselected package libubsan1:armhf. Preparing to unpack .../40-libubsan1_8.3.0-2_armhf.deb ... Unpacking libubsan1:armhf (8.3.0-2) ... Selecting previously unselected package libgcc-8-dev:armhf. Preparing to unpack .../41-libgcc-8-dev_8.3.0-2_armhf.deb ... Unpacking libgcc-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package liblzma5:armhf. Preparing to unpack .../42-liblzma5_5.2.4-1_armhf.deb ... Unpacking liblzma5:armhf (5.2.4-1) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../43-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package libtinfo6:armhf. Preparing to unpack .../44-libtinfo6_6.1+20181013-2_armhf.deb ... Unpacking libtinfo6:armhf (6.1+20181013-2) ... Selecting previously unselected package libncursesw6:armhf. Preparing to unpack .../45-libncursesw6_6.1+20181013-2_armhf.deb ... Unpacking libncursesw6:armhf (6.1+20181013-2) ... Selecting previously unselected package libpython3.7:amd64. Preparing to unpack .../46-libpython3.7_3.7.2-2_amd64.deb ... Unpacking libpython3.7:amd64 (3.7.2-2) ... Selecting previously unselected package libpython3.7-dev:amd64. Preparing to unpack .../47-libpython3.7-dev_3.7.2-2_amd64.deb ... Unpacking libpython3.7-dev:amd64 (3.7.2-2) ... Selecting previously unselected package libpython3-dev:amd64. Preparing to unpack .../48-libpython3-dev_3.7.2-1_amd64.deb ... Unpacking libpython3-dev:amd64 (3.7.2-1) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../49-libssl1.1_1.1.1b-1_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1b-1) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../50-libpython3.7-minimal_3.7.2-2_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.2-2) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../51-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libsqlite3-0:armhf. Preparing to unpack .../52-libsqlite3-0_3.27.2-1_armhf.deb ... Unpacking libsqlite3-0:armhf (3.27.2-1) ... Selecting previously unselected package libuuid1:armhf. Preparing to unpack .../53-libuuid1_2.33.1-0.1_armhf.deb ... Unpacking libuuid1:armhf (2.33.1-0.1) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../54-libpython3.7-stdlib_3.7.2-2_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.2-2) ... Selecting previously unselected package zlib1g:armhf. Preparing to unpack .../55-zlib1g_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libpython3.7:armhf. Preparing to unpack .../56-libpython3.7_3.7.2-2_armhf.deb ... Unpacking libpython3.7:armhf (3.7.2-2) ... Selecting previously unselected package libpython3.7-dev:armhf. Preparing to unpack .../57-libpython3.7-dev_3.7.2-2_armhf.deb ... Unpacking libpython3.7-dev:armhf (3.7.2-2) ... Selecting previously unselected package libpython3-dev:armhf. Preparing to unpack .../58-libpython3-dev_3.7.2-1_armhf.deb ... Unpacking libpython3-dev:armhf (3.7.2-1) ... Selecting previously unselected package libstdc++-8-dev:armhf. Preparing to unpack .../59-libstdc++-8-dev_8.3.0-2_armhf.deb ... Unpacking libstdc++-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package python3.7-dev. Preparing to unpack .../60-python3.7-dev_3.7.2-2_amd64.deb ... Unpacking python3.7-dev (3.7.2-2) ... Selecting previously unselected package python3-dev. Preparing to unpack .../61-python3-dev_3.7.2-1_amd64.deb ... Unpacking python3-dev (3.7.2-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../62-python3-pkg-resources_40.8.0-1_all.deb ... Unpacking python3-pkg-resources (40.8.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../63-python3-setuptools_40.8.0-1_all.deb ... Unpacking python3-setuptools (40.8.0-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy:armhf. Preparing to unpack .../64-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-1) ... No schema files found: doing nothing. Setting up linux-libc-dev:armhf (4.19.20-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up autotools-dev (20180224.1) ... Setting up libexpat1-dev:amd64 (2.2.6-1) ... Setting up libncurses6:amd64 (6.1+20181013-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up gcc-8-base:armhf (8.3.0-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libcroco3:amd64 (0.6.12-3) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up libmpdec2:amd64 (2.4.2-2) ... Setting up libbsd0:amd64 (0.9.1-2) ... Setting up libelf1:amd64 (0.176-1) ... Setting up libfile-stripnondeterminism-perl (1.1.1-1) ... Setting up libpython3.7-stdlib:amd64 (3.7.2-2) ... Setting up gettext (0.19.8.1-9) ... Setting up libpython3.7:amd64 (3.7.2-2) ... Setting up libtool (2.4.6-10) ... Setting up libpython3.7-dev:amd64 (3.7.2-2) ... Setting up m4 (1.4.18-2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-2) ... Setting up libpython3-stdlib:amd64 (3.7.2-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.2-2) ... Setting up libpython3-dev:amd64 (3.7.2-1) ... Setting up po-debconf (1.0.21) ... Setting up python3 (3.7.2-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up python3.7-dev (3.7.2-2) ... Setting up python3-lib2to3 (3.7.2-3) ... Setting up python3-pkg-resources (40.8.0-1) ... Setting up python3-distutils (3.7.2-3) ... Setting up dh-python (3.20180927) ... Setting up python3-setuptools (40.8.0-1) ... Setting up python3-dev (3.7.2-1) ... Setting up libc6:armhf (2.28-7) ... Setting up libc6-dev:armhf (2.28-7) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libbz2-1.0:armhf (1.0.6-9) ... Setting up libdb5.3:armhf (5.3.28+dfsg1-0.5) ... Setting up libtinfo6:armhf (6.1+20181013-2) ... Setting up liblzma5:armhf (5.2.4-1) ... Setting up libgcc1:armhf (1:8.3.0-2) ... Setting up libssl1.1:armhf (1.1.1b-1) ... Setting up libsqlite3-0:armhf (3.27.2-1) ... Setting up zlib1g:armhf (1:1.2.11.dfsg-1) ... Setting up libffi6:armhf (3.2.1-9) ... Setting up libgomp1:armhf (8.3.0-2) ... Setting up libpython3.7-minimal:armhf (3.7.2-2) ... Setting up dh-autoreconf (19) ... Setting up libatomic1:armhf (8.3.0-2) ... Setting up libuuid1:armhf (2.33.1-0.1) ... Setting up libncursesw6:armhf (6.1+20181013-2) ... Setting up dh-strip-nondeterminism (1.1.1-1) ... Setting up libstdc++6:armhf (8.3.0-2) ... Setting up libreadline7:armhf (7.0-5) ... Setting up libexpat1:armhf (2.2.6-1) ... Setting up libpython3.7-stdlib:armhf (3.7.2-2) ... Setting up libpython3.7:armhf (3.7.2-2) ... Setting up debhelper (12.1.1) ... Setting up libasan5:armhf (8.3.0-2) ... Setting up libexpat1-dev:armhf (2.2.6-1) ... Setting up libubsan1:armhf (8.3.0-2) ... Setting up libpython3.7-dev:armhf (3.7.2-2) ... Setting up libgcc-8-dev:armhf (8.3.0-2) ... Setting up libstdc++-8-dev:armhf (8.3.0-2) ... Setting up libpython3-dev:armhf (3.7.2-1) ... Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Processing triggers for libc-bin (2.28-7) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Initial Foreign Architectures: armhf Arch check ok (armhf included in linux-any kfreebsd-any all) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64) Toolchain package versions: binutils_2.31.1-14 dpkg-dev_1.19.5 g++-8_8.3.0-2 gcc-8_8.3.0-2 libc6-dev_2.28-7 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.2.0-20cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.2.0-20cross1 linux-libc-dev_4.19.20-1 Package versions: adduser_3.118 apt_1.8.0~rc4 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.1 base-passwd_3.5.46 bash_5.0-2 binutils_2.31.1-14 binutils-arm-linux-gnueabihf_2.31.1-14 binutils-common_2.31.1-14 binutils-x86-64-linux-gnu_2.31.1-14 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.5 bzip2_1.0.6-9 ca-certificates_20190110 ccache_3.6-1 coreutils_8.30-2 cpp_4:8.2.0-2 cpp-8_8.3.0-2 cpp-8-arm-linux-gnueabihf_8.2.0-20cross1 cpp-arm-linux-gnueabihf_4:8.2.0-2 cross-config_2.6.15-2 crossbuild-essential-armhf_12.5 dash_0.5.10.2-5 debconf_1.5.71 debhelper_12.1.1 debian-archive-keyring_2018.1 debianutils_4.8.6.1 dh-autoreconf_19 dh-python_3.20180927 dh-strip-nondeterminism_1.1.1-1 diffutils_1:3.7-2 dirmngr_2.2.12-1 dpkg_1.19.5 dpkg-cross_2.6.15-2 dpkg-dev_1.19.5 dwz_0.12-3 e2fsprogs_1.44.5-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-2 findutils_4.6.0+git+20190209-2 g++_4:8.2.0-2 g++-8_8.3.0-2 g++-8-arm-linux-gnueabihf_8.2.0-20cross1 g++-arm-linux-gnueabihf_4:8.2.0-2 gcc_4:8.2.0-2 gcc-8_8.3.0-2 gcc-8-arm-linux-gnueabihf_8.2.0-20cross1 gcc-8-arm-linux-gnueabihf-base_8.2.0-20cross1 gcc-8-base_8.3.0-2 gcc-8-cross-base_8.2.0-20cross1 gcc-arm-linux-gnueabihf_4:8.2.0-2 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.12-1 gnupg-l10n_2.2.12-1 gnupg-utils_2.2.12-1 gpg_2.2.12-1 gpg-agent_2.2.12-1 gpg-wks-client_2.2.12-1 gpg-wks-server_2.2.12-1 gpgconf_2.2.12-1 gpgsm_2.2.12-1 gpgv_2.2.12-1 grep_3.3-1 groff-base_1.22.4-2 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 intltool-debian_0.35.0+20060710.5 libacl1_2.2.52-5 libapt-pkg5.0_1.8.0~rc4 libarchive-zip-perl_1.64-1 libasan5_8.3.0-2 libasan5-armhf-cross_8.2.0-20cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-2 libatomic1-armhf-cross_8.2.0-20cross1 libattr1_1:2.4.47-4 libaudit-common_1:2.8.4-2 libaudit1_1:2.8.4-2 libauthen-sasl-perl_2.1600-1 libbinutils_2.31.1-14 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9 libc-bin_2.28-7 libc-dev-bin_2.28-7 libc6_2.28-7 libc6-armhf-cross_2.28-4cross1 libc6-dev_2.28-7 libc6-dev-armhf-cross_2.28-4cross1 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-2 libcom-err2_1.44.5-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libdata-dump-perl_1.23-1 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.247 libdebian-dpkgcross-perl_2.6.15-2 libdpkg-perl_1.19.5 libeatmydata1_105-7 libelf1_0.176-1 libencode-locale-perl_1.05-1 libexpat1_2.2.6-1 libexpat1-dev_2.2.6-1 libext2fs2_1.44.5-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-listing-perl_6.04-1 libfile-stripnondeterminism-perl_1.1.1-1 libfile-which-perl_1.23-1 libfont-afm-perl_1.20-2 libgcc-8-dev_8.3.0-2 libgcc-8-dev-armhf-cross_8.2.0-20cross1 libgcc1_1:8.3.0-2 libgcc1-armhf-cross_1:8.2.0-20cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-3 libgdbm6_1.18.1-3 libglib2.0-0_2.58.3-1 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.6-2 libgomp1_8.3.0-2 libgomp1-armhf-cross_8.2.0-20cross1 libgpg-error0_1.35-1 libhogweed4_3.4.1-1 libhtml-form-perl_6.03-1 libhtml-format-perl_2.12-1 libhtml-parser-perl_3.72-3+b3 libhtml-tagset-perl_3.20-3 libhtml-tree-perl_5.07-2 libhttp-cookies-perl_6.04-1 libhttp-daemon-perl_6.01-1 libhttp-date-perl_6.02-1 libhttp-message-perl_6.18-1 libhttp-negotiate-perl_6.01-1 libicu63_63.1-6 libidn2-0_2.0.5-1 libio-html-perl_1.001-1 libio-socket-ssl-perl_2.060-3 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_8.3.0-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-2 liblwp-mediatypes-perl_6.02-1 liblwp-protocol-https-perl_6.07-2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-2 libmagic1_1:5.35-2 libmailtools-perl_2.18-1 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpdec2_2.4.2-2 libmpfr6_4.0.2-1 libmpx2_8.3.0-2 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnet-http-perl_6.18-1 libnet-smtp-ssl-perl_1.04-1 libnet-ssleay-perl_1.85-2+b1 libnettle6_3.4.1-1 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre3_2:8.39-11 libperl5.28_5.28.1-4 libpipeline1_1.5.1-2 libpython3-dev_3.7.2-1 libpython3-stdlib_3.7.2-1 libpython3.7_3.7.2-2 libpython3.7-dev_3.7.2-2 libpython3.7-minimal_3.7.2-2 libpython3.7-stdlib_3.7.2-2 libquadmath0_8.3.0-2 libreadline7_7.0-5 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsigsegv2_2.12-2 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-1 libss2_1.44.5-1 libssl1.1_1.1.1b-1 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.2.0-20cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.2.0-20cross1 libsystemd0_241-1 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtry-tiny-perl_0.30-1 libtsan0_8.3.0-2 libubsan1_8.3.0-2 libubsan1-armhf-cross_8.2.0-20cross1 libuchardet0_0.0.6-3 libudev1_241-1 libunistring2_0.9.10-1 liburi-perl_1.76-1 libuuid1_2.33.1-0.1 libwww-perl_6.36-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-parser-perl_2.44-3 libxml-sax-base-perl_1.09-1 libxml-sax-expat-perl_0.51-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libyaml-0-2_0.2.1-1 libyaml-libyaml-perl_0.76+repack-1 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.20-1 linux-libc-dev-armhf-cross_4.19.13-1cross1 login_1:4.5-1.1 lsb-base_10.2018112800 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mawk_1.3.3-17+b3 mime-support_3.62 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 netbase_5.6 openssl_1.1.1b-1 passwd_1:4.5-1.1 patch_2.7.6-3 perl_5.28.1-4 perl-base_5.28.1-4 perl-modules-5.28_5.28.1-4 perl-openssl-defaults_3 pinentry-curses_1.1.0-1+b1 po-debconf_1.0.21 python3_3.7.2-1 python3-dev_3.7.2-1 python3-distutils_3.7.2-3 python3-lib2to3_3.7.2-3 python3-minimal_3.7.2-1 python3-pkg-resources_40.8.0-1 python3-setuptools_40.8.0-1 python3.7_3.7.2-2 python3.7-dev_3.7.2-2 python3.7-minimal_3.7.2-2 readline-common_7.0-5 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-5 tzdata_2018i-1 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-runtime_2.33.1-0.1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libnatpmp Binary: libnatpmp-dev, libnatpmp1, natpmp-utils, natpmpc, python3-libnatpmp Architecture: linux-any kfreebsd-any all Version: 20150609-7 Maintainer: Thomas Goirand Uploaders: Yangfl , Homepage: http://miniupnp.free.fr/libnatpmp.html Standards-Version: 4.3.0 Vcs-Browser: https://salsa.debian.org/miniupnp-team/libnatpmp Vcs-Git: https://salsa.debian.org/miniupnp-team/libnatpmp.git Build-Depends: debhelper (>= 12~), dh-python, libpython3-dev, python3-dev:any, python3-setuptools Package-List: libnatpmp-dev deb libdevel optional arch=linux-any,kfreebsd-any libnatpmp1 deb libs optional arch=linux-any,kfreebsd-any natpmp-utils deb oldlibs optional arch=all natpmpc deb net optional arch=linux-any,kfreebsd-any python3-libnatpmp deb python optional arch=linux-any,kfreebsd-any Checksums-Sha1: 8a4eb09b9512c73ebe4b44b6b66b43504cb69539 24392 libnatpmp_20150609.orig.tar.gz a4fc059fcce1593b7222454bbac989a160541941 5104 libnatpmp_20150609-7.debian.tar.xz Checksums-Sha256: e1aa9c4c4219bc06943d6b2130f664daee213fb262fcb94dd355815b8f4536b0 24392 libnatpmp_20150609.orig.tar.gz 823e8394bca83f1238f9c697d666ad3c20e4841fe643c034e5da2ec598656d82 5104 libnatpmp_20150609-7.debian.tar.xz Files: 7bd1af6710271e1743df5422be350bd8 24392 libnatpmp_20150609.orig.tar.gz 87cad0712581682be6cbf1e5b86f5b3a 5104 libnatpmp_20150609-7.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEoLGp81CJVhMOekJc1BatFaxrQ/4FAlxcsZEACgkQ1BatFaxr Q/6oJw/+N0lNOMg7S/C1OlV9qDyu72rStomTqBw9ZuMNqJ3DPy5fpWcGRPMqwu9r k/rqhXca90W46OwQUGOFzLCtdMb1Z4guz5uQc/RPcjK9jPZ/Lp4p+uEvVn+5+ZDO 0xWf4r+XH5WHwwMDqqMvdK/2WCMYYu9wWWqmeufRdJjaGHr3HtAJs4Rz6SHVdkk9 tsZSF26MRG1ZNbJYO+U3vEC3pKWI2vaMluZZMOKhB/SVbb4CNbBtiM7xxMq5JzOX 6Dg3g+j3sLwoY3IOaqq7iKUH/MZ2hSmuUVXddySD/ELcmvXbw57ZMFD8kK/tKeq/ RXL+Q7miiIdMLsSIljbbf1GHnbgYvATqtR3fdY8u/qi9ya7rA8KcVSZwyGSsVzxf FVcA4/8X9Bcf9bybr/vQh9DddGoZvuFExx7g5LCVhfgBQ3mcXjHJu5rcjd/xpyFk WcJykxgiCCybX2TtO1hpeBLdaKpwth7HbA8smrOU+ovgMY7Z8QEpxMCPHxQXbRB3 Te1JlOY9ut175y1RJH9T6EJnpl9ZP0ytqLutOWO3FcSAtNBoVy2BPjXpvRiyumFJ Dww36e11iRfbC9BqshKAoWEgYd8l6uiRanSodEIvyhsgnZvFGbzDEPukVn1f87HW yoV5sSOfJV5bhhF2ffPE0JA7Z1zd8x7kEJJdez/9BFYlmxvsdBg= =/3YF -----END PGP SIGNATURE----- gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Thu Feb 7 22:30:41 2019 UTC gpgv: using RSA key A0B1A9F3508956130E7A425CD416AD15AC6B43FE gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libnatpmp_20150609-7.dsc dpkg-source: info: extracting libnatpmp in /<> dpkg-source: info: unpacking libnatpmp_20150609.orig.tar.gz dpkg-source: info: unpacking libnatpmp_20150609-7.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying makefile-fix-os-detect-and-ldflags.patch dpkg-source: info: applying python-module-fix-tp_free-call.patch dpkg-source: info: applying python-module-use-shared-lib.patch Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf CCACHE_COMPRESS=1 CCACHE_DIR=/var/cache/ccache-sbuild CCACHE_UMASK=002 CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf DEB_BUILD_OPTIONS=nocheck HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=build PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=1000 SCHROOT_GROUP=build SCHROOT_SESSION_ID=unstable-amd64-sbuild-7c062f37-85a7-4f8c-a41a-2555b18e3424 SCHROOT_UID=1000 SCHROOT_USER=build SHELL=/bin/sh USER=build dpkg-buildpackage ----------------- Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16 dpkg-buildpackage: info: source package libnatpmp dpkg-buildpackage: info: source version 20150609-7 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Yangfl dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --with python3 dh_auto_clean make -j16 clean make[1]: Entering directory '/<>' rm -f natpmp.o getgateway.o testgetgateway.o natpmpc.o natpmp-jni.o testgetgateway natpmpc-shared natpmpc-static libnatpmp.a libnatpmp.so fr/free/miniupnp/libnatpmp/NatPmp.class fr/free/miniupnp/libnatpmp/NatPmpResponse.class fr/free/miniupnp/libnatpmp/LibraryExtractor.class fr/free/miniupnp/libnatpmp/URLUtils.class libjninatpmp.so rm -f pythonmodule rm -f -r build/ dist/ libraries/ make[1]: Leaving directory '/<>' dh_clean debian/rules build-arch dh build-arch --with python3 dh_update_autotools_config -a dh_autoreconf -a dh_auto_configure -a debian/rules override_dh_auto_build make[1]: Entering directory '/<>' dh_auto_build -- DEB_HOST_ARCH_OS=linux make -j16 "INSTALL=install --strip-program=true" PKG_CONFIG=arm-linux-gnueabihf-pkg-config CXX=arm-linux-gnueabihf-g\+\+ CC=arm-linux-gnueabihf-gcc DEB_HOST_ARCH_OS=linux make[2]: Entering directory '/<>' arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -fPIC -Wall -DENABLE_STRNATPMPERR -Wdate-time -D_FORTIFY_SOURCE=2 -c -o natpmp.o natpmp.c arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -fPIC -Wall -DENABLE_STRNATPMPERR -Wdate-time -D_FORTIFY_SOURCE=2 -c -o getgateway.o getgateway.c arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -fPIC -Wall -DENABLE_STRNATPMPERR -Wdate-time -D_FORTIFY_SOURCE=2 -c -o testgetgateway.o testgetgateway.c arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -fPIC -Wall -DENABLE_STRNATPMPERR -Wdate-time -D_FORTIFY_SOURCE=2 -c -o natpmpc.o natpmpc.c arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o testgetgateway testgetgateway.o getgateway.o In file included from /usr/arm-linux-gnueabihf/include/bits/libc-header-start.h:33, from /usr/arm-linux-gnueabihf/include/string.h:26, from natpmp.c:32: /usr/arm-linux-gnueabihf/include/features.h:184:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" ^~~~~~~ ar crs libnatpmp.a natpmp.o getgateway.o arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -shared -Wl,-soname,libnatpmp.so.1 -o libnatpmp.so natpmp.o getgateway.o arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o natpmpc-static natpmpc.o libnatpmp.a arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o natpmpc-shared natpmpc.o libnatpmp.so make[2]: Leaving directory '/<>' dh_auto_build --buildsystem=pybuild I: pybuild base:217: /usr/bin/python3 setup.py build running build running build_ext building 'libnatpmp' extension creating build creating build/temp.linux-armhf-3.7 arm-linux-gnueabihf-gcc -pthread -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DENABLE_STRNATPMPERR -I/usr/include/python3.7m -c libnatpmpmodule.c -o build/temp.linux-armhf-3.7/libnatpmpmodule.o libnatpmpmodule.c:217:34: warning: missing braces around initializer [-Wmissing-braces] static PyTypeObject NATPMPType = { ^ libnatpmpmodule.c:220:3: warning: initialization of ‘int’ from ‘char *’ makes integer from pointer without a cast [-Wint-conversion] "libnatpmp.NATPMP", /*tp_name*/ ^~~~~~~~~~~~~~~~~~ libnatpmpmodule.c:220:3: note: (near initialization for ‘NATPMPType.tp_basicsize’) libnatpmpmodule.c:223:3: warning: initialization of ‘int (*)(PyObject *, FILE *, int)’ {aka ‘int (*)(struct _object *, struct _IO_FILE *, int)’} from incompatible pointer type ‘void (*)(PyObject *)’ {aka ‘void (*)(struct _object *)’} [-Wincompatible-pointer-types] (destructor)NATPMPObject_dealloc, /*tp_dealloc*/ ^ libnatpmpmodule.c:223:3: note: (near initialization for ‘NATPMPType.tp_print’) In file included from /usr/include/python3.7m/pytime.h:6, from /usr/include/python3.7m/Python.h:87, from libnatpmpmodule.c:30: /usr/include/python3.7m/object.h:671:29: warning: initialization of ‘const char *’ from ‘long unsigned int’ makes pointer from integer without a cast [-Wint-conversion] #define Py_TPFLAGS_DEFAULT ( \ ^ libnatpmpmodule.c:238:3: note: in expansion of macro ‘Py_TPFLAGS_DEFAULT’ Py_TPFLAGS_DEFAULT, /*tp_flags*/ ^~~~~~~~~~~~~~~~~~ /usr/include/python3.7m/object.h:671:29: note: (near initialization for ‘NATPMPType.tp_doc’) #define Py_TPFLAGS_DEFAULT ( \ ^ libnatpmpmodule.c:238:3: note: in expansion of macro ‘Py_TPFLAGS_DEFAULT’ Py_TPFLAGS_DEFAULT, /*tp_flags*/ ^~~~~~~~~~~~~~~~~~ libnatpmpmodule.c:239:3: warning: initialization of ‘int (*)(PyObject *, int (*)(PyObject *, void *), void *)’ {aka ‘int (*)(struct _object *, int (*)(struct _object *, void *), void *)’} from incompatible pointer type ‘char *’ [-Wincompatible-pointer-types] "NATPMP objects", /* tp_doc */ ^~~~~~~~~~~~~~~~ libnatpmpmodule.c:239:3: note: (near initialization for ‘NATPMPType.tp_traverse’) libnatpmpmodule.c:246:3: warning: initialization of ‘struct PyMemberDef *’ from incompatible pointer type ‘PyMethodDef *’ {aka ‘struct PyMethodDef *’} [-Wincompatible-pointer-types] NATPMP_methods, /* tp_methods */ ^~~~~~~~~~~~~~ libnatpmpmodule.c:246:3: note: (near initialization for ‘NATPMPType.tp_members’) libnatpmpmodule.c:247:3: warning: initialization of ‘struct PyGetSetDef *’ from incompatible pointer type ‘PyMemberDef *’ {aka ‘struct PyMemberDef *’} [-Wincompatible-pointer-types] NATPMP_members, /* tp_members */ ^~~~~~~~~~~~~~ libnatpmpmodule.c:247:3: note: (near initialization for ‘NATPMPType.tp_getset’) libnatpmpmodule.c:256:3: warning: initialization of ‘void (*)(void *)’ from incompatible pointer type ‘PyObject * (*)(PyTypeObject *, PyObject *, PyObject *)’ {aka ‘struct _object * (*)(struct _typeobject *, struct _object *, struct _object *)’} [-Wincompatible-pointer-types] NATPMPObject_new, /* tp_new */ ^~~~~~~~~~~~~~~~ libnatpmpmodule.c:256:3: note: (near initialization for ‘NATPMPType.tp_free’) libnatpmpmodule.c:217:34: warning: missing braces around initializer [-Wmissing-braces] static PyTypeObject NATPMPType = { ^ libnatpmpmodule.c: In function ‘initlibnatpmp’: libnatpmpmodule.c:273:5: warning: ‘return’ with no value, in function returning non-void return; ^~~~~~ libnatpmpmodule.c:268:1: note: declared here initlibnatpmp(void) ^~~~~~~~~~~~~ libnatpmpmodule.c:275:7: warning: implicit declaration of function ‘Py_InitModule3’; did you mean ‘Py_Initialize’? [-Wimplicit-function-declaration] m = Py_InitModule3("libnatpmp", libnatpmp_methods, ^~~~~~~~~~~~~~ Py_Initialize libnatpmpmodule.c:275:5: warning: assignment to ‘PyObject *’ {aka ‘struct _object *’} from ‘int’ makes pointer from integer without a cast [-Wint-conversion] m = Py_InitModule3("libnatpmp", libnatpmp_methods, ^ arm-linux-gnueabihf-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 build/temp.linux-armhf-3.7/libnatpmpmodule.o libnatpmp.so -o /<>/.pybuild/cpython3_3.7/build/libnatpmp.cpython-37m-arm-linux-gnueabihf.so make[1]: Leaving directory '/<>' dh_auto_test -a create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary-arch dh binary-arch --with python3 dh_testroot -a dh_prep -a debian/rules override_dh_auto_install make[1]: Entering directory '/<>' dh_auto_install -- 'PREFIX=$(DESTDIR)' make -j16 install DESTDIR=/<>/debian/tmp AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" PREFIX=\$\(DESTDIR\) make[2]: Entering directory '/<>' install --strip-program=true -d /<>/debian/tmp/usr/include install: WARNING: ignoring --strip-program option as -s option was not specified install --strip-program=true -m 644 natpmp.h /<>/debian/tmp/usr/include install: WARNING: ignoring --strip-program option as -s option was not specified install --strip-program=true -d /<>/debian/tmp/usr/lib install: WARNING: ignoring --strip-program option as -s option was not specified install --strip-program=true -m 644 libnatpmp.a /<>/debian/tmp/usr/lib install: WARNING: ignoring --strip-program option as -s option was not specified install --strip-program=true -m 644 libnatpmp.so /<>/debian/tmp/usr/lib/libnatpmp.so.1 install: WARNING: ignoring --strip-program option as -s option was not specified install --strip-program=true -d /<>/debian/tmp/usr/bin install: WARNING: ignoring --strip-program option as -s option was not specified install --strip-program=true -m 755 natpmpc-shared /<>/debian/tmp/usr/bin/natpmpc install: WARNING: ignoring --strip-program option as -s option was not specified ln -s -f libnatpmp.so.1 /<>/debian/tmp/usr/lib/libnatpmp.so make[2]: Leaving directory '/<>' dh_auto_install --buildsystem=pybuild I: pybuild base:217: /usr/bin/python3 setup.py install --root /<>/debian/tmp running install running build running build_ext running install_lib creating /<>/debian/tmp/usr/lib/python3.7 creating /<>/debian/tmp/usr/lib/python3.7/dist-packages copying /<>/.pybuild/cpython3_3.7/build/libnatpmp.cpython-37m-arm-linux-gnueabihf.so -> /<>/debian/tmp/usr/lib/python3.7/dist-packages running install_egg_info Writing /<>/debian/tmp/usr/lib/python3.7/dist-packages/libnatpmp-1.0.egg-info mkdir -p debian/tmp/usr/lib/arm-linux-gnueabihf mv debian/tmp/usr/lib/libnatpmp* debian/tmp/usr/lib/arm-linux-gnueabihf/ make[1]: Leaving directory '/<>' dh_install -a debian/rules override_dh_installdocs make[1]: Entering directory '/<>' dh_installdocs -plibnatpmp-dev -plibnatpmp1 --link-doc=libnatpmp1 dh_installdocs -Nlibnatpmp-dev -Nlibnatpmp1 make[1]: Leaving directory '/<>' dh_installchangelogs -a dh_installman -a dh_python3 -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/python3-libnatpmp/usr/lib/python3/dist-packages/libnatpmp.cpython-37m-arm-linux-gnueabihf.so was not linked against libpthread.so.0 (it uses none of the library's symbols) dh_installdeb -a dh_gencontrol -a dpkg-gencontrol: warning: package python3-libnatpmp: substitution variable ${python3:Versions} unused, but is defined dpkg-gencontrol: warning: package python3-libnatpmp: substitution variable ${python3:Versions} unused, but is defined dh_md5sums -a dh_builddeb -a dpkg-deb: building package 'libnatpmp1' in '../libnatpmp1_20150609-7_armhf.deb'. dpkg-deb: building package 'libnatpmp-dev' in '../libnatpmp-dev_20150609-7_armhf.deb'. dpkg-deb: building package 'libnatpmp1-dbgsym' in '../libnatpmp1-dbgsym_20150609-7_armhf.deb'. dpkg-deb: building package 'natpmpc' in '../natpmpc_20150609-7_armhf.deb'. dpkg-deb: building package 'natpmpc-dbgsym' in '../natpmpc-dbgsym_20150609-7_armhf.deb'. dpkg-deb: building package 'python3-libnatpmp' in '../python3-libnatpmp_20150609-7_armhf.deb'. dpkg-deb: building package 'python3-libnatpmp-dbgsym' in '../python3-libnatpmp-dbgsym_20150609-7_armhf.deb'. dpkg-genbuildinfo --build=any dpkg-genchanges --build=any >../libnatpmp_20150609-7_armhf.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2019-03-05T02:16:29Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libnatpmp_20150609-7_armhf.changes: ----------------------------------- Format: 1.8 Date: Tue, 29 Jan 2019 16:33:03 +0800 Source: libnatpmp Binary: libnatpmp-dev libnatpmp1 libnatpmp1-dbgsym natpmpc natpmpc-dbgsym python3-libnatpmp python3-libnatpmp-dbgsym Built-For-Profiles: cross nocheck Architecture: armhf Version: 20150609-7 Distribution: unstable-amd64-sbuild Urgency: medium Maintainer: Thomas Goirand Changed-By: Yangfl Description: libnatpmp-dev - portable and fully compliant implementation of NAT-PMP (dev files libnatpmp1 - portable and fully compliant implementation of NAT-PMP natpmpc - portable and fully compliant implementation of NAT-PMP (client) python3-libnatpmp - portable and fully compliant implementation of NAT-PMP (Python 3 Closes: 905200 Changes: libnatpmp (20150609-7) unstable; urgency=medium . * Fix symlink overwrites of doc directories (Closes: #905200). * Mark Multi-Arch same for libnatpmp1. Checksums-Sha1: c06d73d7e234797e521bd1ee42cd60fd2adb5064 6464 libnatpmp-dev_20150609-7_armhf.deb b409f926aa91164e608aba2097dfe67f84a5eba1 9784 libnatpmp1-dbgsym_20150609-7_armhf.deb 24e3bfc6b52a08abc56d990f1e01c2fb4d03e015 8628 libnatpmp1_20150609-7_armhf.deb 81c9c26595e7366cb9312656e680e48ba1d2c8de 6624 libnatpmp_20150609-7_armhf.buildinfo 6c5aaa9fa0644b0a3365bb25845a1797f92dd7e9 9636 natpmpc-dbgsym_20150609-7_armhf.deb 4989b8899af6a739a4593fb27279e094291dd6e4 9204 natpmpc_20150609-7_armhf.deb 740bbe7f206dc9127354ac4d97b7dc7d84f70c55 16192 python3-libnatpmp-dbgsym_20150609-7_armhf.deb 308a1a2672f9bccce541b5fbcea23c508de3bf85 7936 python3-libnatpmp_20150609-7_armhf.deb Checksums-Sha256: 5381ab96780662bbc032d3d41133467702555d524ca9ef02a84cb46c4591f75d 6464 libnatpmp-dev_20150609-7_armhf.deb 5daa82338eed29f0d1835bf029a29ef7481f86f15538a13dc0cc6a1f6c73478e 9784 libnatpmp1-dbgsym_20150609-7_armhf.deb aade22eaf8eec895aeee69a47d0593b8a60738d5a64d17e0cf58fd83f936f4cb 8628 libnatpmp1_20150609-7_armhf.deb 68526992769f1d76654658ad685d7e7ee0b318cdcb5dc975c0ee9c70eff7156b 6624 libnatpmp_20150609-7_armhf.buildinfo 2bf94c2ee4ab0f086be78edea71597bac6fb40a78870de7aa7f6fb418246bdad 9636 natpmpc-dbgsym_20150609-7_armhf.deb 5191bee1916559a507031d189dac7ddfe0f286ad5661b787d637294774984b18 9204 natpmpc_20150609-7_armhf.deb 45d04ed49d12625bab2777679666223bfdebc32ebc7bb7f54b8b567822345563 16192 python3-libnatpmp-dbgsym_20150609-7_armhf.deb 8ce7adfa145bf684cae0177b1684404f5e751ab31ca6f394caa7dfcc4c9efc1d 7936 python3-libnatpmp_20150609-7_armhf.deb Files: 8803e332389ced92161e0f35544a491a 6464 libdevel optional libnatpmp-dev_20150609-7_armhf.deb 3a13a18dd7283c30dce8e751d3df969e 9784 debug optional libnatpmp1-dbgsym_20150609-7_armhf.deb bcef7da46fd21228e2ce28d318f0087b 8628 libs optional libnatpmp1_20150609-7_armhf.deb add1d15f5988a2451a5e124492fdec96 6624 net optional libnatpmp_20150609-7_armhf.buildinfo 36b2a7e26ad5adbb436e03598f7a0551 9636 debug optional natpmpc-dbgsym_20150609-7_armhf.deb 1a04ed09314d704af6265a684d4fcc80 9204 net optional natpmpc_20150609-7_armhf.deb 54997700af641739e1d15089c14ee7b0 16192 debug optional python3-libnatpmp-dbgsym_20150609-7_armhf.deb aca62177ad24984e9e46ef789f6663c5 7936 python optional python3-libnatpmp_20150609-7_armhf.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libnatpmp Binary: libnatpmp-dev libnatpmp1 natpmp-utils natpmpc python3-libnatpmp Architecture: armhf Version: 20150609-7 Checksums-Md5: 8803e332389ced92161e0f35544a491a 6464 libnatpmp-dev_20150609-7_armhf.deb 3a13a18dd7283c30dce8e751d3df969e 9784 libnatpmp1-dbgsym_20150609-7_armhf.deb bcef7da46fd21228e2ce28d318f0087b 8628 libnatpmp1_20150609-7_armhf.deb 36b2a7e26ad5adbb436e03598f7a0551 9636 natpmpc-dbgsym_20150609-7_armhf.deb 1a04ed09314d704af6265a684d4fcc80 9204 natpmpc_20150609-7_armhf.deb 54997700af641739e1d15089c14ee7b0 16192 python3-libnatpmp-dbgsym_20150609-7_armhf.deb aca62177ad24984e9e46ef789f6663c5 7936 python3-libnatpmp_20150609-7_armhf.deb Checksums-Sha1: c06d73d7e234797e521bd1ee42cd60fd2adb5064 6464 libnatpmp-dev_20150609-7_armhf.deb b409f926aa91164e608aba2097dfe67f84a5eba1 9784 libnatpmp1-dbgsym_20150609-7_armhf.deb 24e3bfc6b52a08abc56d990f1e01c2fb4d03e015 8628 libnatpmp1_20150609-7_armhf.deb 6c5aaa9fa0644b0a3365bb25845a1797f92dd7e9 9636 natpmpc-dbgsym_20150609-7_armhf.deb 4989b8899af6a739a4593fb27279e094291dd6e4 9204 natpmpc_20150609-7_armhf.deb 740bbe7f206dc9127354ac4d97b7dc7d84f70c55 16192 python3-libnatpmp-dbgsym_20150609-7_armhf.deb 308a1a2672f9bccce541b5fbcea23c508de3bf85 7936 python3-libnatpmp_20150609-7_armhf.deb Checksums-Sha256: 5381ab96780662bbc032d3d41133467702555d524ca9ef02a84cb46c4591f75d 6464 libnatpmp-dev_20150609-7_armhf.deb 5daa82338eed29f0d1835bf029a29ef7481f86f15538a13dc0cc6a1f6c73478e 9784 libnatpmp1-dbgsym_20150609-7_armhf.deb aade22eaf8eec895aeee69a47d0593b8a60738d5a64d17e0cf58fd83f936f4cb 8628 libnatpmp1_20150609-7_armhf.deb 2bf94c2ee4ab0f086be78edea71597bac6fb40a78870de7aa7f6fb418246bdad 9636 natpmpc-dbgsym_20150609-7_armhf.deb 5191bee1916559a507031d189dac7ddfe0f286ad5661b787d637294774984b18 9204 natpmpc_20150609-7_armhf.deb 45d04ed49d12625bab2777679666223bfdebc32ebc7bb7f54b8b567822345563 16192 python3-libnatpmp-dbgsym_20150609-7_armhf.deb 8ce7adfa145bf684cae0177b1684404f5e751ab31ca6f394caa7dfcc4c9efc1d 7936 python3-libnatpmp_20150609-7_armhf.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Tue, 05 Mar 2019 02:16:29 +0000 Build-Path: /<> Installed-Build-Depends: autoconf (= 2.69-11), automake (= 1:1.16.1-4), autopoint (= 0.19.8.1-9), autotools-dev (= 20180224.1), base-files (= 10.1), base-passwd (= 3.5.46), bash (= 5.0-2), binutils (= 2.31.1-14), binutils-common (= 2.31.1-14), binutils-x86-64-linux-gnu (= 2.31.1-14), bsdmainutils (= 11.1.2+b1), bsdutils (= 1:2.33.1-0.1), build-essential (= 12.5), bzip2 (= 1.0.6-9), coreutils (= 8.30-2), cpp (= 4:8.2.0-2), cpp-8 (= 8.3.0-2), dash (= 0.5.10.2-5), debconf (= 1.5.71), debhelper (= 12.1.1), debianutils (= 4.8.6.1), dh-autoreconf (= 19), dh-python (= 3.20180927), dh-strip-nondeterminism (= 1.1.1-1), diffutils (= 1:3.7-2), dpkg (= 1.19.5), dpkg-dev (= 1.19.5), dwz (= 0.12-3), fdisk (= 2.33.1-0.1), file (= 1:5.35-2), findutils (= 4.6.0+git+20190209-2), g++ (= 4:8.2.0-2), g++-8 (= 8.3.0-2), gcc (= 4:8.2.0-2), gcc-8 (= 8.3.0-2), gcc-8-base (= 8.3.0-2), gettext (= 0.19.8.1-9), gettext-base (= 0.19.8.1-9), grep (= 3.3-1), groff-base (= 1.22.4-2), gzip (= 1.9-3), hostname (= 3.21), init-system-helpers (= 1.56+nmu1), intltool-debian (= 0.35.0+20060710.5), libacl1 (= 2.2.52-5), libarchive-zip-perl (= 1.64-1), libasan5 (= 8.3.0-2), libatomic1 (= 8.3.0-2), libattr1 (= 1:2.4.47-4), libaudit-common (= 1:2.8.4-2), libaudit1 (= 1:2.8.4-2), libbinutils (= 2.31.1-14), libblkid1 (= 2.33.1-0.1), libbsd0 (= 0.9.1-2), libbz2-1.0 (= 1.0.6-9), libc-bin (= 2.28-7), libc-dev-bin (= 2.28-7), libc6 (= 2.28-7), libc6-dev (= 2.28-7), libcap-ng0 (= 0.7.9-2), libcc1-0 (= 8.3.0-2), libcroco3 (= 0.6.12-3), libdb5.3 (= 5.3.28+dfsg1-0.5), libdebconfclient0 (= 0.247), libdpkg-perl (= 1.19.5), libelf1 (= 0.176-1), libexpat1 (= 2.2.6-1), libexpat1-dev (= 2.2.6-1), libfdisk1 (= 2.33.1-0.1), libffi6 (= 3.2.1-9), libfile-stripnondeterminism-perl (= 1.1.1-1), libgcc-8-dev (= 8.3.0-2), libgcc1 (= 1:8.3.0-2), libgcrypt20 (= 1.8.4-5), libgdbm-compat4 (= 1.18.1-3), libgdbm6 (= 1.18.1-3), libglib2.0-0 (= 2.58.3-1), libgmp10 (= 2:6.1.2+dfsg-4), libgomp1 (= 8.3.0-2), libgpg-error0 (= 1.35-1), libicu63 (= 63.1-6), libisl19 (= 0.20-2), libitm1 (= 8.3.0-2), liblsan0 (= 8.3.0-2), liblz4-1 (= 1.8.3-1), liblzma5 (= 5.2.4-1), libmagic-mgc (= 1:5.35-2), libmagic1 (= 1:5.35-2), libmount1 (= 2.33.1-0.1), libmpc3 (= 1.1.0-1), libmpdec2 (= 2.4.2-2), libmpfr6 (= 4.0.2-1), libmpx2 (= 8.3.0-2), libncurses6 (= 6.1+20181013-2), libncursesw6 (= 6.1+20181013-2), libpam-modules (= 1.3.1-5), libpam-modules-bin (= 1.3.1-5), libpam-runtime (= 1.3.1-5), libpam0g (= 1.3.1-5), libpcre3 (= 2:8.39-11), libperl5.28 (= 5.28.1-4), libpipeline1 (= 1.5.1-2), libpython3-dev (= 3.7.2-1), libpython3-stdlib (= 3.7.2-1), libpython3.7 (= 3.7.2-2), libpython3.7-dev (= 3.7.2-2), libpython3.7-minimal (= 3.7.2-2), libpython3.7-stdlib (= 3.7.2-2), libquadmath0 (= 8.3.0-2), libreadline7 (= 7.0-5), libseccomp2 (= 2.3.3-4), libselinux1 (= 2.8-1+b1), libsigsegv2 (= 2.12-2), libsmartcols1 (= 2.33.1-0.1), libsqlite3-0 (= 3.27.2-1), libssl1.1 (= 1.1.1b-1), libstdc++-8-dev (= 8.3.0-2), libstdc++6 (= 8.3.0-2), libsystemd0 (= 241-1), libtinfo6 (= 6.1+20181013-2), libtool (= 2.4.6-10), libtsan0 (= 8.3.0-2), libubsan1 (= 8.3.0-2), libuchardet0 (= 0.0.6-3), libudev1 (= 241-1), libunistring2 (= 0.9.10-1), libuuid1 (= 2.33.1-0.1), libxml2 (= 2.9.4+dfsg1-7+b3), linux-libc-dev (= 4.19.20-1), login (= 1:4.5-1.1), m4 (= 1.4.18-2), make (= 4.2.1-1.2), man-db (= 2.8.5-2), mawk (= 1.3.3-17+b3), mime-support (= 3.62), ncurses-base (= 6.1+20181013-2), ncurses-bin (= 6.1+20181013-2), patch (= 2.7.6-3), perl (= 5.28.1-4), perl-base (= 5.28.1-4), perl-modules-5.28 (= 5.28.1-4), po-debconf (= 1.0.21), python3 (= 3.7.2-1), python3-dev (= 3.7.2-1), python3-distutils (= 3.7.2-3), python3-lib2to3 (= 3.7.2-3), python3-minimal (= 3.7.2-1), python3-pkg-resources (= 40.8.0-1), python3-setuptools (= 40.8.0-1), python3.7 (= 3.7.2-2), python3.7-dev (= 3.7.2-2), python3.7-minimal (= 3.7.2-2), readline-common (= 7.0-5), sed (= 4.7-1), sensible-utils (= 0.0.12), sysvinit-utils (= 2.93-8), tar (= 1.30+dfsg-5), util-linux (= 2.33.1-0.1), xz-utils (= 5.2.4-1), zlib1g (= 1:1.2.11.dfsg-1) Environment: DEB_BUILD_OPTIONS="nocheck parallel=16" DEB_BUILD_PROFILES="cross nocheck" LANG="en_US.UTF-8" LC_ALL="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" MAKEFLAGS=" -j16" SOURCE_DATE_EPOCH="1548750783" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libnatpmp-dev_20150609-7_armhf.deb ---------------------------------- new Debian package, version 2.0. size 6464 bytes: control archive=1008 bytes. 1153 bytes, 25 lines control 129 bytes, 2 lines md5sums Package: libnatpmp-dev Source: libnatpmp Version: 20150609-7 Architecture: armhf Maintainer: Thomas Goirand Installed-Size: 25 Depends: libnatpmp1 (= 20150609-7) Section: libdevel Priority: optional Multi-Arch: same Homepage: http://miniupnp.free.fr/libnatpmp.html Description: portable and fully compliant implementation of NAT-PMP (dev files) NAT-PMP is the direct concurrent to the UPnP IGD specification. It is providing a way to do NAT traversal. It is part of the Bonjour protocol specifications. At the moment it is mainly supported by Apple software and hardware. For a way to add NAT-PMP capabilities to your *BSD, Linux or (Open)Solaris Router, you should have a look at MiniUPnPd which is supporting NAT-PMP in addition to UPnP since December 2007 ! . libnatpmp is an attempt to make a portable and fully compliant implementation of the protocol NAT-PMP for the client side. It is based on non blocking sockets and all calls of the API are asynchronous. It is therefore very easy to integrate the NAT-PMP code to any event driven code. . This package contains development files needed to build using libnatpmp. drwxr-xr-x root/root 0 2019-01-29 08:33 ./ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/include/ -rw-r--r-- root/root 7350 2019-01-29 08:33 ./usr/include/natpmp.h drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/arm-linux-gnueabihf/ -rw-r--r-- root/root 6368 2019-01-29 08:33 ./usr/lib/arm-linux-gnueabihf/libnatpmp.a lrwxrwxrwx root/root 0 2019-01-29 08:33 ./usr/lib/arm-linux-gnueabihf/libnatpmp.so -> libnatpmp.so.1 drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/ lrwxrwxrwx root/root 0 2019-01-29 08:33 ./usr/share/doc/libnatpmp-dev -> libnatpmp1 libnatpmp1-dbgsym_20150609-7_armhf.deb -------------------------------------- new Debian package, version 2.0. size 9784 bytes: control archive=532 bytes. 363 bytes, 13 lines control 106 bytes, 1 lines md5sums Package: libnatpmp1-dbgsym Source: libnatpmp Version: 20150609-7 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Thomas Goirand Installed-Size: 22 Depends: libnatpmp1 (= 20150609-7) Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libnatpmp1 Build-Ids: 493ada9bbfa306a0b186f452c853fdada26619d4 drwxr-xr-x root/root 0 2019-01-29 08:33 ./ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/.build-id/49/ -rw-r--r-- root/root 12256 2019-01-29 08:33 ./usr/lib/debug/.build-id/49/3ada9bbfa306a0b186f452c853fdada26619d4.debug drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/ lrwxrwxrwx root/root 0 2019-01-29 08:33 ./usr/share/doc/libnatpmp1-dbgsym -> libnatpmp1 libnatpmp1_20150609-7_armhf.deb ------------------------------- new Debian package, version 2.0. size 8628 bytes: control archive=1316 bytes. 1122 bytes, 26 lines control 297 bytes, 4 lines md5sums 37 bytes, 1 lines shlibs 411 bytes, 12 lines symbols 67 bytes, 2 lines triggers Package: libnatpmp1 Source: libnatpmp Version: 20150609-7 Architecture: armhf Maintainer: Thomas Goirand Installed-Size: 27 Depends: libc6 (>= 2.28) Suggests: minissdpd, natpmpc Section: libs Priority: optional Multi-Arch: same Homepage: http://miniupnp.free.fr/libnatpmp.html Description: portable and fully compliant implementation of NAT-PMP NAT-PMP is the direct concurrent to the UPnP IGD specification. It is providing a way to do NAT traversal. It is part of the Bonjour protocol specifications. At the moment it is mainly supported by Apple software and hardware. For a way to add NAT-PMP capabilities to your *BSD, Linux or (Open)Solaris Router, you should have a look at MiniUPnPd which is supporting NAT-PMP in addition to UPnP since December 2007 ! . libnatpmp is an attempt to make a portable and fully compliant implementation of the protocol NAT-PMP for the client side. It is based on non blocking sockets and all calls of the API are asynchronous. It is therefore very easy to integrate the NAT-PMP code to any event driven code. . This package contains the shared library. drwxr-xr-x root/root 0 2019-01-29 08:33 ./ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/arm-linux-gnueabihf/ -rw-r--r-- root/root 9480 2019-01-29 08:33 ./usr/lib/arm-linux-gnueabihf/libnatpmp.so.1 drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/libnatpmp1/ -rw-r--r-- root/root 1627 2019-01-29 08:33 ./usr/share/doc/libnatpmp1/changelog.Debian.gz -rw-r--r-- root/root 1113 2013-11-26 08:48 ./usr/share/doc/libnatpmp1/changelog.gz -rw-r--r-- root/root 1886 2019-01-29 08:33 ./usr/share/doc/libnatpmp1/copyright natpmpc-dbgsym_20150609-7_armhf.deb ----------------------------------- new Debian package, version 2.0. size 9636 bytes: control archive=520 bytes. 337 bytes, 12 lines control 106 bytes, 1 lines md5sums Package: natpmpc-dbgsym Source: libnatpmp Version: 20150609-7 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Thomas Goirand Installed-Size: 23 Depends: natpmpc (= 20150609-7) Section: debug Priority: optional Description: debug symbols for natpmpc Build-Ids: 80daa9bd8ed8c07d5b1cd50e8dc7f52bc45eaa34 drwxr-xr-x root/root 0 2019-01-29 08:33 ./ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/.build-id/80/ -rw-r--r-- root/root 12712 2019-01-29 08:33 ./usr/lib/debug/.build-id/80/daa9bd8ed8c07d5b1cd50e8dc7f52bc45eaa34.debug drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/ lrwxrwxrwx root/root 0 2019-01-29 08:33 ./usr/share/doc/natpmpc-dbgsym -> natpmpc natpmpc_20150609-7_armhf.deb ---------------------------- new Debian package, version 2.0. size 9204 bytes: control archive=1100 bytes. 1184 bytes, 26 lines control 327 bytes, 5 lines md5sums Package: natpmpc Source: libnatpmp Version: 20150609-7 Architecture: armhf Maintainer: Thomas Goirand Installed-Size: 26 Depends: libc6 (>= 2.15), libnatpmp1 (>= 20150609) Breaks: natpmp-utils (<< 20150609) Replaces: natpmp-utils (<< 20150609) Section: net Priority: optional Homepage: http://miniupnp.free.fr/libnatpmp.html Description: portable and fully compliant implementation of NAT-PMP (client) NAT-PMP is the direct concurrent to the UPnP IGD specification. It is providing a way to do NAT traversal. It is part of the Bonjour protocol specifications. At the moment it is mainly supported by Apple software and hardware. For a way to add NAT-PMP capabilities to your *BSD, Linux or (Open)Solaris Router, you should have a look at MiniUPnPd which is supporting NAT-PMP in addition to UPnP since December 2007 ! . libnatpmp is an attempt to make a portable and fully compliant implementation of the protocol NAT-PMP for the client side. It is based on non blocking sockets and all calls of the API are asynchronous. It is therefore very easy to integrate the NAT-PMP code to any event driven code. . This package contains the natpmpc test client. drwxr-xr-x root/root 0 2019-01-29 08:33 ./ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/bin/ -rwxr-xr-x root/root 9636 2019-01-29 08:33 ./usr/bin/natpmpc drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/natpmpc/ -rw-r--r-- root/root 1627 2019-01-29 08:33 ./usr/share/doc/natpmpc/changelog.Debian.gz -rw-r--r-- root/root 1113 2013-11-26 08:48 ./usr/share/doc/natpmpc/changelog.gz -rw-r--r-- root/root 1886 2019-01-29 08:33 ./usr/share/doc/natpmpc/copyright drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/man/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/man/man1/ -rw-r--r-- root/root 273 2019-01-29 08:33 ./usr/share/man/man1/natpmpc.1.gz python3-libnatpmp-dbgsym_20150609-7_armhf.deb --------------------------------------------- new Debian package, version 2.0. size 16192 bytes: control archive=540 bytes. 384 bytes, 13 lines control 106 bytes, 1 lines md5sums Package: python3-libnatpmp-dbgsym Source: libnatpmp Version: 20150609-7 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Thomas Goirand Installed-Size: 29 Depends: python3-libnatpmp (= 20150609-7) Section: debug Priority: optional Multi-Arch: same Description: debug symbols for python3-libnatpmp Build-Ids: 983623a1e85dabdcfc16c482e655a6886debc300 drwxr-xr-x root/root 0 2019-01-29 08:33 ./ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/debug/.build-id/98/ -rw-r--r-- root/root 18524 2019-01-29 08:33 ./usr/lib/debug/.build-id/98/3623a1e85dabdcfc16c482e655a6886debc300.debug drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/ lrwxrwxrwx root/root 0 2019-01-29 08:33 ./usr/share/doc/python3-libnatpmp-dbgsym -> python3-libnatpmp python3-libnatpmp_20150609-7_armhf.deb -------------------------------------- new Debian package, version 2.0. size 7936 bytes: control archive=1148 bytes. 1218 bytes, 26 lines control 437 bytes, 5 lines md5sums Package: python3-libnatpmp Source: libnatpmp Version: 20150609-7 Architecture: armhf Maintainer: Thomas Goirand Installed-Size: 22 Depends: python3 (<< 3.8), python3 (>= 3.7~), libc6 (>= 2.15), libnatpmp1 (>= 20150609) Provides: python3.7-libnatpmp Section: python Priority: optional Multi-Arch: same Homepage: http://miniupnp.free.fr/libnatpmp.html Description: portable and fully compliant implementation of NAT-PMP (Python 3 bindings) NAT-PMP is the direct concurrent to the UPnP IGD specification. It is providing a way to do NAT traversal. It is part of the Bonjour protocol specifications. At the moment it is mainly supported by Apple software and hardware. For a way to add NAT-PMP capabilities to your *BSD, Linux or (Open)Solaris Router, you should have a look at MiniUPnPd which is supporting NAT-PMP in addition to UPnP since December 2007 ! . libnatpmp is an attempt to make a portable and fully compliant implementation of the protocol NAT-PMP for the client side. It is based on non blocking sockets and all calls of the API are asynchronous. It is therefore very easy to integrate the NAT-PMP code to any event driven code. . This package contains the Python 3 bindings. drwxr-xr-x root/root 0 2019-01-29 08:33 ./ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/python3/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/lib/python3/dist-packages/ -rw-r--r-- root/root 181 2019-01-29 08:33 ./usr/lib/python3/dist-packages/libnatpmp-1.0.egg-info -rw-r--r-- root/root 5688 2019-01-29 08:33 ./usr/lib/python3/dist-packages/libnatpmp.cpython-37m-arm-linux-gnueabihf.so drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/ drwxr-xr-x root/root 0 2019-01-29 08:33 ./usr/share/doc/python3-libnatpmp/ -rw-r--r-- root/root 1627 2019-01-29 08:33 ./usr/share/doc/python3-libnatpmp/changelog.Debian.gz -rw-r--r-- root/root 1113 2013-11-26 08:48 ./usr/share/doc/python3-libnatpmp/changelog.gz -rw-r--r-- root/root 1886 2019-01-29 08:33 ./usr/share/doc/python3-libnatpmp/copyright lintian ------- Setup apt archive ----------------- Merged Build-Depends: lintian:amd64 Filtered Build-Depends: lintian:amd64 dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<>/apt_archive/sbuild-build-depends-lintian-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [963 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [554 B] Get:5 copy:/<>/apt_archive ./ Packages [641 B] Fetched 2158 B in 0s (140 kB/s) Reading package lists... Reading package lists... Install lintian build dependencies (apt-based resolver) ------------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils t1utils Suggested packages: libhtml-template-perl binutils-multiarch libtext-template-perl Recommended packages: libcgi-fast-perl libasync-mergepoint-perl libsereal-perl libtest-fatal-perl libtest-refcount-perl libdigest-bubblebabble-perl libnet-dns-sec-perl libnet-libidn-perl libunicode-utf8-perl libperlio-gzip-perl The following NEW packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils sbuild-build-depends-lintian-dummy:armhf t1utils 0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded. Need to get 2847 kB/2971 kB of archives. After this operation, 9356 kB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [844 B] Get:2 http://10.116.41.102/debian sid/main amd64 libapt-pkg-perl amd64 0.1.34+b1 [71.2 kB] Get:3 http://10.116.41.102/debian sid/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB] Get:4 http://10.116.41.102/debian sid/main amd64 libcgi-pm-perl all 4.40-1 [222 kB] Get:5 http://10.116.41.102/debian sid/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB] Get:6 http://10.116.41.102/debian sid/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB] Get:7 http://10.116.41.102/debian sid/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB] Get:8 http://10.116.41.102/debian sid/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB] Get:9 http://10.116.41.102/debian sid/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB] Get:10 http://10.116.41.102/debian sid/main amd64 libnet-dns-perl all 1.19-1 [372 kB] Get:11 http://10.116.41.102/debian sid/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB] Get:12 http://10.116.41.102/debian sid/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB] Get:13 http://10.116.41.102/debian sid/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB] Get:14 http://10.116.41.102/debian sid/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB] Get:15 http://10.116.41.102/debian sid/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB] Get:16 http://10.116.41.102/debian sid/main amd64 libfuture-perl all 0.39-1 [74.5 kB] Get:17 http://10.116.41.102/debian sid/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB] Get:18 http://10.116.41.102/debian sid/main amd64 libio-async-perl all 0.72-1 [262 kB] Get:19 http://10.116.41.102/debian sid/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB] Get:20 http://10.116.41.102/debian sid/main amd64 libipc-run-perl all 20180523.0-1 [101 kB] Get:21 http://10.116.41.102/debian sid/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB] Get:22 http://10.116.41.102/debian sid/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB] Get:23 http://10.116.41.102/debian sid/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB] Get:24 http://10.116.41.102/debian sid/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB] Get:25 http://10.116.41.102/debian sid/main amd64 t1utils amd64 1.41-3 [62.3 kB] Get:26 http://10.116.41.102/debian sid/main amd64 lintian all 2.9.1 [1193 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2847 kB in 0s (9961 kB/s) Selecting previously unselected package diffstat. (Reading database ... 20476 files and directories currently installed.) Preparing to unpack .../00-diffstat_1.62-1_amd64.deb ... Unpacking diffstat (1.62-1) ... Selecting previously unselected package libapt-pkg-perl. Preparing to unpack .../01-libapt-pkg-perl_0.1.34+b1_amd64.deb ... Unpacking libapt-pkg-perl (0.1.34+b1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../02-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../03-libcgi-pm-perl_4.40-1_all.deb ... Unpacking libcgi-pm-perl (4.40-1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../04-libsub-name-perl_0.21-1+b3_amd64.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libclass-accessor-perl. Preparing to unpack .../05-libclass-accessor-perl_0.51-1_all.deb ... Unpacking libclass-accessor-perl (0.51-1) ... Selecting previously unselected package libclone-perl. Preparing to unpack .../06-libclone-perl_0.41-1+b1_amd64.deb ... Unpacking libclone-perl (0.41-1+b1) ... Selecting previously unselected package libdigest-hmac-perl. Preparing to unpack .../07-libdigest-hmac-perl_1.03+dfsg-2_all.deb ... Unpacking libdigest-hmac-perl (1.03+dfsg-2) ... Selecting previously unselected package libnet-ip-perl. Preparing to unpack .../08-libnet-ip-perl_1.26-2_all.deb ... Unpacking libnet-ip-perl (1.26-2) ... Selecting previously unselected package libnet-dns-perl. Preparing to unpack .../09-libnet-dns-perl_1.19-1_all.deb ... Unpacking libnet-dns-perl (1.19-1) ... Selecting previously unselected package libnet-domain-tld-perl. Preparing to unpack .../10-libnet-domain-tld-perl_1.75-1_all.deb ... Unpacking libnet-domain-tld-perl (1.75-1) ... Selecting previously unselected package libemail-valid-perl. Preparing to unpack .../11-libemail-valid-perl_1.202-1_all.deb ... Unpacking libemail-valid-perl (1.202-1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../12-libexporter-tiny-perl_1.002001-1_all.deb ... Unpacking libexporter-tiny-perl (1.002001-1) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../13-libipc-system-simple-perl_1.25-4_all.deb ... Unpacking libipc-system-simple-perl (1.25-4) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../14-libfile-basedir-perl_0.08-1_all.deb ... Unpacking libfile-basedir-perl (0.08-1) ... Selecting previously unselected package libfuture-perl. Preparing to unpack .../15-libfuture-perl_0.39-1_all.deb ... Unpacking libfuture-perl (0.39-1) ... Selecting previously unselected package libstruct-dumb-perl. Preparing to unpack .../16-libstruct-dumb-perl_0.09-1_all.deb ... Unpacking libstruct-dumb-perl (0.09-1) ... Selecting previously unselected package libio-async-perl. Preparing to unpack .../17-libio-async-perl_0.72-1_all.deb ... Unpacking libio-async-perl (0.72-1) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../18-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ... Unpacking libio-pty-perl (1:1.08-1.1+b5) ... Selecting previously unselected package libipc-run-perl. Preparing to unpack .../19-libipc-run-perl_20180523.0-1_all.deb ... Unpacking libipc-run-perl (20180523.0-1) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../20-liblist-moreutils-perl_0.416-1+b4_amd64.deb ... Unpacking liblist-moreutils-perl (0.416-1+b4) ... Selecting previously unselected package libparse-debianchangelog-perl. Preparing to unpack .../21-libparse-debianchangelog-perl_1.2.0-13_all.deb ... Unpacking libparse-debianchangelog-perl (1.2.0-13) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../22-libpath-tiny-perl_0.108-1_all.deb ... Unpacking libpath-tiny-perl (0.108-1) ... Selecting previously unselected package libtext-levenshtein-perl. Preparing to unpack .../23-libtext-levenshtein-perl_0.13-1_all.deb ... Unpacking libtext-levenshtein-perl (0.13-1) ... Selecting previously unselected package patchutils. Preparing to unpack .../24-patchutils_0.3.4-2_amd64.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package t1utils. Preparing to unpack .../25-t1utils_1.41-3_amd64.deb ... Unpacking t1utils (1.41-3) ... Selecting previously unselected package lintian. Preparing to unpack .../26-lintian_2.9.1_all.deb ... Unpacking lintian (2.9.1) ... Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf. Preparing to unpack .../27-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Setting up libapt-pkg-perl (0.1.34+b1) ... Setting up libstruct-dumb-perl (0.09-1) ... Setting up libio-pty-perl (1:1.08-1.1+b5) ... Setting up libclone-perl (0.41-1+b1) ... Setting up libfuture-perl (0.39-1) ... Setting up libcgi-pm-perl (4.40-1) ... Setting up libtext-levenshtein-perl (0.13-1) ... Setting up libio-async-perl (0.72-1) ... Setting up patchutils (0.3.4-2) ... Setting up libdigest-hmac-perl (1.03+dfsg-2) ... Setting up libipc-system-simple-perl (1.25-4) ... Setting up libnet-domain-tld-perl (1.75-1) ... Setting up t1utils (1.41-3) ... Setting up diffstat (1.62-1) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up libpath-tiny-perl (0.108-1) ... Setting up libexporter-tiny-perl (1.002001-1) ... Setting up libclass-accessor-perl (0.51-1) ... Setting up libnet-ip-perl (1.26-2) ... Setting up libfile-basedir-perl (0.08-1) ... Setting up liblist-moreutils-perl (0.416-1+b4) ... Setting up libnet-dns-perl (1.19-1) ... Setting up libparse-debianchangelog-perl (1.2.0-13) ... Setting up libemail-valid-perl (1.202-1) ... Setting up lintian (2.9.1) ... Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Processing triggers for man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. I: Lintian run was successful. +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following packages will be REMOVED: autoconf* automake* autopoint* autotools-dev* bsdmainutils* debhelper* dh-autoreconf* dh-python* dh-strip-nondeterminism* diffstat* dwz* gcc-8-base:armhf* gettext* gettext-base* groff-base* intltool-debian* libapt-pkg-perl* libarchive-zip-perl* libasan5:armhf* libatomic1:armhf* libbsd0* libbz2-1.0:armhf* libc6:armhf* libc6-dev:armhf* libcapture-tiny-perl* libcgi-pm-perl* libclass-accessor-perl* libclone-perl* libcroco3* libdb5.3:armhf* libdigest-hmac-perl* libelf1* libemail-valid-perl* libexpat1:armhf* libexpat1-dev* libexpat1-dev:armhf* libexporter-tiny-perl* libffi6:armhf* libfile-basedir-perl* libfile-stripnondeterminism-perl* libfuture-perl* libgcc-8-dev:armhf* libgcc1:armhf* libglib2.0-0* libgomp1:armhf* libio-async-perl* libio-pty-perl* libipc-run-perl* libipc-system-simple-perl* liblist-moreutils-perl* liblzma5:armhf* libmpdec2* libmpdec2:armhf* libncurses6* libncursesw6:armhf* libnet-dns-perl* libnet-domain-tld-perl* libnet-ip-perl* libparse-debianchangelog-perl* libpath-tiny-perl* libpipeline1* libpython3-dev* libpython3-dev:armhf* libpython3-stdlib* libpython3.7* libpython3.7:armhf* libpython3.7-dev* libpython3.7-dev:armhf* libpython3.7-minimal* libpython3.7-minimal:armhf* libpython3.7-stdlib* libpython3.7-stdlib:armhf* libreadline7:armhf* libsigsegv2* libsqlite3-0:armhf* libssl1.1:armhf* libstdc++-8-dev:armhf* libstdc++6:armhf* libstruct-dumb-perl* libsub-name-perl* libtext-levenshtein-perl* libtinfo6:armhf* libtool* libubsan1:armhf* libuchardet0* libuuid1:armhf* lintian* linux-libc-dev:armhf* m4* man-db* mime-support* patchutils* po-debconf* python3* python3-dev* python3-distutils* python3-lib2to3* python3-minimal* python3-pkg-resources* python3-setuptools* python3.7* python3.7-dev* python3.7-minimal* sbuild-build-depends-lintian-dummy:armhf* sbuild-build-depends-main-dummy:armhf* t1utils* zlib1g:armhf* 0 upgraded, 0 newly installed, 107 to remove and 0 not upgraded. After this operation, 297 MB disk space will be freed. (Reading database ... 21754 files and directories currently installed.) Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Removing lintian (2.9.1) ... Removing python3-dev (3.7.2-1) ... Removing dh-python (3.20180927) ... Removing diffstat (1.62-1) ... Removing libstdc++-8-dev:armhf (8.3.0-2) ... Removing libgcc-8-dev:armhf (8.3.0-2) ... Removing libubsan1:armhf (8.3.0-2) ... Removing libasan5:armhf (8.3.0-2) ... Removing libstdc++6:armhf (8.3.0-2) ... Removing libapt-pkg-perl (0.1.34+b1) ... Removing libatomic1:armhf (8.3.0-2) ... Removing libpython3-dev:armhf (3.7.2-1) ... Removing libpython3.7-dev:armhf (3.7.2-2) ... Removing libpython3.7:armhf (3.7.2-2) ... Removing libpython3.7-stdlib:armhf (3.7.2-2) ... Removing libbz2-1.0:armhf (1.0.6-9) ... Removing zlib1g:armhf (1:1.2.11.dfsg-1) ... Removing liblzma5:armhf (5.2.4-1) ... Removing libexpat1-dev:armhf (2.2.6-1) ... Removing libc6-dev:armhf (2.28-7) ... Removing libcapture-tiny-perl (0.48-1) ... Removing libparse-debianchangelog-perl (1.2.0-13) ... Removing libcgi-pm-perl (4.40-1) ... Removing libclass-accessor-perl (0.51-1) ... Removing libclone-perl (0.41-1+b1) ... Removing libdb5.3:armhf (5.3.28+dfsg1-0.5) ... Removing libemail-valid-perl (1.202-1) ... Removing libnet-dns-perl (1.19-1) ... Removing libdigest-hmac-perl (1.03+dfsg-2) ... Removing libexpat1:armhf (2.2.6-1) ... Removing python3.7-dev (3.7.2-2) ... Removing libpython3-dev:amd64 (3.7.2-1) ... Removing libpython3.7-dev:amd64 (3.7.2-2) ... Removing libexpat1-dev:amd64 (2.2.6-1) ... Removing liblist-moreutils-perl (0.416-1+b4) ... Removing libexporter-tiny-perl (1.002001-1) ... Removing libffi6:armhf (3.2.1-9) ... Removing libfile-basedir-perl (0.08-1) ... Removing libio-async-perl (0.72-1) ... Removing libfuture-perl (0.39-1) ... Removing libgomp1:armhf (8.3.0-2) ... Removing libipc-run-perl (20180523.0-1) ... Removing libio-pty-perl (1:1.08-1.1+b5) ... Removing libipc-system-simple-perl (1.25-4) ... Removing python3-setuptools (40.8.0-1) ... Removing python3-distutils (3.7.2-3) ... Removing python3-pkg-resources (40.8.0-1) ... Removing python3-lib2to3 (3.7.2-3) ... Removing python3 (3.7.2-1) ... Removing python3.7 (3.7.2-2) ... Removing libpython3.7:amd64 (3.7.2-2) ... Removing libmpdec2:armhf (2.4.2-2) ... Removing libncursesw6:armhf (6.1+20181013-2) ... Removing libnet-domain-tld-perl (1.75-1) ... Removing libnet-ip-perl (1.26-2) ... Removing libpath-tiny-perl (0.108-1) ... Removing libpython3-stdlib:amd64 (3.7.2-1) ... Removing libpython3.7-minimal:armhf (3.7.2-2) ... Removing python3-minimal (3.7.2-1) ... Removing python3.7-minimal (3.7.2-2) ... Removing libreadline7:armhf (7.0-5) ... Removing libsqlite3-0:armhf (3.27.2-1) ... Removing libssl1.1:armhf (1.1.1b-1) ... Removing libstruct-dumb-perl (0.09-1) ... Removing libsub-name-perl (0.21-1+b3) ... Removing libtext-levenshtein-perl (0.13-1) ... Removing libtinfo6:armhf (6.1+20181013-2) ... Removing libuuid1:armhf (2.33.1-0.1) ... Removing linux-libc-dev:armhf (4.19.20-1) ... Removing patchutils (0.3.4-2) ... Removing t1utils (1.41-3) ... Removing libpython3.7-stdlib:amd64 (3.7.2-2) ... find: ‘/usr/lib/python3’: No such file or directory Removing libmpdec2:amd64 (2.4.2-2) ... Removing libpython3.7-minimal:amd64 (3.7.2-2) ... Removing mime-support (3.62) ... Removing libgcc1:armhf (1:8.3.0-2) ... Removing debhelper (12.1.1) ... Removing dh-strip-nondeterminism (1.1.1-1) ... Removing man-db (2.8.5-2) ... Removing bsdmainutils (11.1.2+b1) ... Removing dwz (0.12-3) ... Removing gcc-8-base:armhf (8.3.0-2) ... Removing po-debconf (1.0.21) ... Removing intltool-debian (0.35.0+20060710.5) ... Removing gettext (0.19.8.1-9) ... Removing gettext-base (0.19.8.1-9) ... Removing groff-base (1.22.4-2) ... Removing libfile-stripnondeterminism-perl (1.1.1-1) ... Removing libarchive-zip-perl (1.64-1) ... Removing libbsd0:amd64 (0.9.1-2) ... Removing libc6:armhf (2.28-7) ... Removing libcroco3:amd64 (0.6.12-3) ... Removing libelf1:amd64 (0.176-1) ... Removing libglib2.0-0:amd64 (2.58.3-1) ... Removing libncurses6:amd64 (6.1+20181013-2) ... Removing libpipeline1:amd64 (1.5.1-2) ... Removing libuchardet0:amd64 (0.0.6-3) ... Removing dh-autoreconf (19) ... Removing automake (1:1.16.1-4) ... Removing autoconf (2.69-11) ... Removing autopoint (0.19.8.1-9) ... Removing libtool (2.4.6-10) ... Removing autotools-dev (20180224.1) ... Removing m4 (1.4.18-2) ... Removing libsigsegv2:amd64 (2.12-2) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... Processing triggers for libc-bin (2.28-7) ... (Reading database ... 16467 files and directories currently installed.) Purging configuration files for mime-support (3.62) ... Purging configuration files for libglib2.0-0:amd64 (2.58.3-1) ... Purging configuration files for libssl1.1:armhf (1.1.1b-1) ... Purging configuration files for lintian (2.9.1) ... Purging configuration files for python3 (3.7.2-1) ... Purging configuration files for man-db (2.8.5-2) ... Purging configuration files for libpython3.7-minimal:amd64 (3.7.2-2) ... dpkg: warning: while removing libpython3.7-minimal:amd64, directory '/usr/lib/python3.7/logging' not empty so not removed dpkg: warning: while removing libpython3.7-minimal:amd64, directory '/usr/lib/python3.7/importlib' not empty so not removed dpkg: warning: while removing libpython3.7-minimal:amd64, directory '/usr/lib/python3.7/encodings' not empty so not removed dpkg: warning: while removing libpython3.7-minimal:amd64, directory '/usr/lib/python3.7/collections' not empty so not removed Purging configuration files for libpython3.7-minimal:armhf (3.7.2-2) ... Purging configuration files for bsdmainutils (11.1.2+b1) ... Purging configuration files for python3.7-minimal (3.7.2-2) ... Purging configuration files for autoconf (2.69-11) ... Purging configuration files for libc6:armhf (2.28-7) ... Purging configuration files for groff-base (1.22.4-2) ... +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any Build-Space: n/a Build-Time: 7 Distribution: unstable-amd64-sbuild Foreign Architectures: armhf Host Architecture: armhf Install-Time: 28 Job: /home/build/sbuild-setup/repo/pool/main/libn/libnatpmp/libnatpmp_20150609-7.dsc Lintian: pass Machine Architecture: amd64 Package: libnatpmp Package-Time: 39 Source-Version: 20150609-7 Space: n/a Status: successful Version: 20150609-7 -------------------------------------------------------------------------------- Finished at 2019-03-05T02:16:29Z Build needed 00:00:39, no disk space