sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 36857dea695f +==============================================================================+ | pcf2bdf 1.05-1 (armhf) Thu, 07 Mar 2019 19:22:33 +0000 | +==============================================================================+ Package: pcf2bdf Version: 1.05-1 Source Version: 1.05-1 Distribution: unstable-amd64-sbuild Machine Architecture: amd64 Host Architecture: armhf Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-230553ac-f903-409e-a266-a145f0a5c215' with '<>' I: NOTICE: Log filtering will replace 'build/pcf2bdf-AvMStg/resolver-W8yMPv' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Hit:1 http://cdn-fastly.deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /home/build/sbuild-setup/repo/pool/main/p/pcf2bdf/pcf2bdf_1.05-1.dsc exists in /home/build/sbuild-setup/repo/pool/main/p/pcf2bdf; copying to chroot I: NOTICE: Log filtering will replace 'build/pcf2bdf-AvMStg/pcf2bdf-1.05' with '<>' I: NOTICE: Log filtering will replace 'build/pcf2bdf-AvMStg' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: cdbs, devscripts, debhelper, dh-buildinfo, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf Filtered Build-Depends: cdbs, devscripts, debhelper, dh-buildinfo, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [401 B] Get:5 copy:/<>/apt_archive ./ Packages [487 B] Fetched 1845 B in 0s (132 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils cdbs debhelper devscripts dh-autoreconf dh-buildinfo dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libb-hooks-op-check-perl libbsd0 libc6:armhf libc6-dev:armhf libclass-method-modifiers-perl libcroco3 libdevel-callchecker-perl libdevel-globaldestruction-perl libdynaloader-functions-perl libelf1 libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf libimport-into-perl libio-pty-perl libipc-run-perl libmodule-runtime-perl libmoo-perl libmpdec2 libncurses6 libparams-classify-perl libpipeline1 libpython3-stdlib libpython3.7-minimal libpython3.7-stdlib librole-tiny-perl libsigsegv2 libstdc++-8-dev:armhf libstdc++6:armhf libstrictures-perl libsub-exporter-progressive-perl libsub-quote-perl libtool libubsan1:armhf libuchardet0 linux-libc-dev:armhf m4 man-db mime-support patchutils po-debconf python3 python3-minimal python3.7 python3.7-minimal wdiff Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make adequate autopkgtest bls-standalone bsd-mailx | mailx check-all-the-things cvs-buildpackage devscripts-el diffoscope disorderfs dose-extra duck faketime gnuplot how-can-i-help libdbd-pg-perl libfile-desktopentry-perl libnet-smtps-perl libterm-size-perl libyaml-syck-perl mozilla-devscripts mutt piuparts postgresql-client quilt ratt reprotest ssh-client svn-buildpackage w3m gettext-doc libasprintf-dev libgettextpo-dev groff glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf libscalar-number-perl libstdc++-8-doc:armhf libbareword-filehandles-perl libindirect-perl libmultidimensional-perl libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl python3-doc python3-tk python3-venv python3.7-venv python3.7-doc binfmt-support wdiff-doc Recommended packages: at dctrl-tools dput | dupload libdistro-info-perl libgit-wrapper-perl libgitlab-api-v4-perl liblist-compare-perl libstring-shellquote-perl licensecheck lintian python3-apt python3-debian python3-magic python3-requests python3-unidiff python3-xdg strace unzip wget | curl debian-keyring equivs libsoap-lite-perl curl | wget | lynx libidn2-0:armhf libarchive-cpio-perl libglib2.0-data shared-mime-info xdg-user-dirs libclass-xsaccessor-perl libsub-name-perl libgpm2 libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils cdbs debhelper devscripts dh-autoreconf dh-buildinfo dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libb-hooks-op-check-perl libbsd0 libc6:armhf libc6-dev:armhf libclass-method-modifiers-perl libcroco3 libdevel-callchecker-perl libdevel-globaldestruction-perl libdynaloader-functions-perl libelf1 libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf libimport-into-perl libio-pty-perl libipc-run-perl libmodule-runtime-perl libmoo-perl libmpdec2 libncurses6 libparams-classify-perl libpipeline1 libpython3-stdlib libpython3.7-minimal libpython3.7-stdlib librole-tiny-perl libsigsegv2 libstdc++-8-dev:armhf libstdc++6:armhf libstrictures-perl libsub-exporter-progressive-perl libsub-quote-perl libtool libubsan1:armhf libuchardet0 linux-libc-dev:armhf m4 man-db mime-support patchutils po-debconf python3 python3-minimal python3.7 python3.7-minimal sbuild-build-depends-main-dummy:armhf wdiff 0 upgraded, 69 newly installed, 0 to remove and 0 not upgraded. Need to get 1545 kB/24.9 MB of archives. After this operation, 107 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [912 B] Get:2 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB] Get:3 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libipc-run-perl all 20180523.0-1 [101 kB] Get:4 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclass-method-modifiers-perl all 2.12-1 [18.6 kB] Get:5 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libsub-exporter-progressive-perl all 0.001013-1 [7588 B] Get:6 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libdevel-globaldestruction-perl all 0.14-1 [8084 B] Get:7 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libb-hooks-op-check-perl amd64 0.22-1+b1 [11.4 kB] Get:8 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libdynaloader-functions-perl all 0.003-1 [12.6 kB] Get:9 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libdevel-callchecker-perl amd64 0.008-1 [15.7 kB] Get:10 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libparams-classify-perl amd64 0.015-1+b1 [25.5 kB] Get:11 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libmodule-runtime-perl all 0.016-1 [19.4 kB] Get:12 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libimport-into-perl all 1.002005-1 [11.6 kB] Get:13 http://cdn-fastly.deb.debian.org/debian sid/main amd64 librole-tiny-perl all 2.000006-1 [19.4 kB] Get:14 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libstrictures-perl all 2.000005-1 [18.3 kB] Get:15 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libsub-quote-perl all 2.005001-1 [17.9 kB] Get:16 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libmoo-perl all 2.003004-2 [57.4 kB] Get:17 http://cdn-fastly.deb.debian.org/debian sid/main amd64 wdiff amd64 1.2.2-2+b1 [122 kB] Get:18 http://cdn-fastly.deb.debian.org/debian sid/main amd64 devscripts amd64 2.19.3 [1044 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1545 kB in 4s (349 kB/s) Selecting previously unselected package libbsd0:amd64. (Reading database ... 16452 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../2-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_amd64.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../4-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libpython3.7-minimal:amd64. Preparing to unpack .../6-libpython3.7-minimal_3.7.2-3_amd64.deb ... Unpacking libpython3.7-minimal:amd64 (3.7.2-3) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../7-python3.7-minimal_3.7.2-3_amd64.deb ... Unpacking python3.7-minimal (3.7.2-3) ... Setting up libpython3.7-minimal:amd64 (3.7.2-3) ... Setting up python3.7-minimal (3.7.2-3) ... Selecting previously unselected package python3-minimal. (Reading database ... 17327 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.2-1_amd64.deb ... Unpacking python3-minimal (3.7.2-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:amd64. Preparing to unpack .../2-libmpdec2_2.4.2-2_amd64.deb ... Unpacking libmpdec2:amd64 (2.4.2-2) ... Selecting previously unselected package libpython3.7-stdlib:amd64. Preparing to unpack .../3-libpython3.7-stdlib_3.7.2-3_amd64.deb ... Unpacking libpython3.7-stdlib:amd64 (3.7.2-3) ... Selecting previously unselected package python3.7. Preparing to unpack .../4-python3.7_3.7.2-3_amd64.deb ... Unpacking python3.7 (3.7.2-3) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../5-libpython3-stdlib_3.7.2-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.7.2-1) ... Setting up python3-minimal (3.7.2-1) ... Selecting previously unselected package python3. (Reading database ... 17764 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.2-1_amd64.deb ... Unpacking python3 (3.7.2-1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../01-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../02-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../03-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../04-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../05-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../06-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../07-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package cdbs. Preparing to unpack .../08-cdbs_0.4.159_all.deb ... Unpacking cdbs (0.4.159) ... Selecting previously unselected package libtool. Preparing to unpack .../09-libtool_2.4.6-10_all.deb ... Unpacking libtool (2.4.6-10) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../10-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../11-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../12-libfile-stripnondeterminism-perl_1.1.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../13-dh-strip-nondeterminism_1.1.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../14-libelf1_0.176-1_amd64.deb ... Unpacking libelf1:amd64 (0.176-1) ... Selecting previously unselected package dwz. Preparing to unpack .../15-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../16-libglib2.0-0_2.58.3-1_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-1) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../17-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../18-libncurses6_6.1+20181013-2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2) ... Selecting previously unselected package gettext. Preparing to unpack .../19-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../20-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../21-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../22-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../23-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ... Unpacking libio-pty-perl (1:1.08-1.1+b5) ... Selecting previously unselected package libipc-run-perl. Preparing to unpack .../24-libipc-run-perl_20180523.0-1_all.deb ... Unpacking libipc-run-perl (20180523.0-1) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../25-libclass-method-modifiers-perl_2.12-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.12-1) ... Selecting previously unselected package libsub-exporter-progressive-perl. Preparing to unpack .../26-libsub-exporter-progressive-perl_0.001013-1_all.deb ... Unpacking libsub-exporter-progressive-perl (0.001013-1) ... Selecting previously unselected package libdevel-globaldestruction-perl. Preparing to unpack .../27-libdevel-globaldestruction-perl_0.14-1_all.deb ... Unpacking libdevel-globaldestruction-perl (0.14-1) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../28-libb-hooks-op-check-perl_0.22-1+b1_amd64.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../29-libdynaloader-functions-perl_0.003-1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../30-libdevel-callchecker-perl_0.008-1_amd64.deb ... Unpacking libdevel-callchecker-perl (0.008-1) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../31-libparams-classify-perl_0.015-1+b1_amd64.deb ... Unpacking libparams-classify-perl (0.015-1+b1) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../32-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../33-libimport-into-perl_1.002005-1_all.deb ... Unpacking libimport-into-perl (1.002005-1) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../34-librole-tiny-perl_2.000006-1_all.deb ... Unpacking librole-tiny-perl (2.000006-1) ... Selecting previously unselected package libstrictures-perl. Preparing to unpack .../35-libstrictures-perl_2.000005-1_all.deb ... Unpacking libstrictures-perl (2.000005-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../36-libsub-quote-perl_2.005001-1_all.deb ... Unpacking libsub-quote-perl (2.005001-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../37-libmoo-perl_2.003004-2_all.deb ... Unpacking libmoo-perl (2.003004-2) ... Selecting previously unselected package patchutils. Preparing to unpack .../38-patchutils_0.3.4-2_amd64.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package wdiff. Preparing to unpack .../39-wdiff_1.2.2-2+b1_amd64.deb ... Unpacking wdiff (1.2.2-2+b1) ... Selecting previously unselected package devscripts. Preparing to unpack .../40-devscripts_2.19.3_amd64.deb ... Unpacking devscripts (2.19.3) ... Selecting previously unselected package dh-buildinfo. Preparing to unpack .../41-dh-buildinfo_0.11+nmu2_all.deb ... Unpacking dh-buildinfo (0.11+nmu2) ... Selecting previously unselected package gcc-8-base:armhf. Preparing to unpack .../42-gcc-8-base_8.3.0-2_armhf.deb ... Unpacking gcc-8-base:armhf (8.3.0-2) ... Selecting previously unselected package libgcc1:armhf. Preparing to unpack .../43-libgcc1_1%3a8.3.0-2_armhf.deb ... Unpacking libgcc1:armhf (1:8.3.0-2) ... Selecting previously unselected package libc6:armhf. Preparing to unpack .../44-libc6_2.28-8_armhf.deb ... Unpacking libc6:armhf (2.28-8) ... Selecting previously unselected package libstdc++6:armhf. Preparing to unpack .../45-libstdc++6_8.3.0-2_armhf.deb ... Unpacking libstdc++6:armhf (8.3.0-2) ... Selecting previously unselected package libasan5:armhf. Preparing to unpack .../46-libasan5_8.3.0-2_armhf.deb ... Unpacking libasan5:armhf (8.3.0-2) ... Selecting previously unselected package libatomic1:armhf. Preparing to unpack .../47-libatomic1_8.3.0-2_armhf.deb ... Unpacking libatomic1:armhf (8.3.0-2) ... Selecting previously unselected package linux-libc-dev:armhf. Preparing to unpack .../48-linux-libc-dev_4.19.20-1_armhf.deb ... Unpacking linux-libc-dev:armhf (4.19.20-1) ... Selecting previously unselected package libc6-dev:armhf. Preparing to unpack .../49-libc6-dev_2.28-8_armhf.deb ... Unpacking libc6-dev:armhf (2.28-8) ... Selecting previously unselected package libgomp1:armhf. Preparing to unpack .../50-libgomp1_8.3.0-2_armhf.deb ... Unpacking libgomp1:armhf (8.3.0-2) ... Selecting previously unselected package libubsan1:armhf. Preparing to unpack .../51-libubsan1_8.3.0-2_armhf.deb ... Unpacking libubsan1:armhf (8.3.0-2) ... Selecting previously unselected package libgcc-8-dev:armhf. Preparing to unpack .../52-libgcc-8-dev_8.3.0-2_armhf.deb ... Unpacking libgcc-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package libstdc++-8-dev:armhf. Preparing to unpack .../53-libstdc++-8-dev_8.3.0-2_armhf.deb ... Unpacking libstdc++-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package sbuild-build-depends-main-dummy:armhf. Preparing to unpack .../54-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up wdiff (1.2.2-2+b1) ... Setting up mime-support (3.62) ... Setting up libdynaloader-functions-perl (0.003-1) ... Setting up libclass-method-modifiers-perl (2.12-1) ... Setting up libio-pty-perl (1:1.08-1.1+b5) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-1) ... No schema files found: doing nothing. Setting up linux-libc-dev:armhf (4.19.20-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up patchutils (0.3.4-2) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:amd64 (6.1+20181013-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up gcc-8-base:armhf (8.3.0-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libcroco3:amd64 (0.6.12-3) ... Setting up libb-hooks-op-check-perl (0.22-1+b1) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up libsub-exporter-progressive-perl (0.001013-1) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up librole-tiny-perl (2.000006-1) ... Setting up libdevel-globaldestruction-perl (0.14-1) ... Setting up libstrictures-perl (2.000005-1) ... Setting up libsub-quote-perl (2.005001-1) ... Setting up libmpdec2:amd64 (2.4.2-2) ... Setting up libbsd0:amd64 (0.9.1-2) ... Setting up cdbs (0.4.159) ... Setting up libelf1:amd64 (0.176-1) ... Setting up libfile-stripnondeterminism-perl (1.1.1-1) ... Setting up libpython3.7-stdlib:amd64 (3.7.2-3) ... Setting up gettext (0.19.8.1-9) ... Setting up libtool (2.4.6-10) ... Setting up m4 (1.4.18-2) ... Setting up libdevel-callchecker-perl (0.008-1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libpython3-stdlib:amd64 (3.7.2-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.2-3) ... Setting up po-debconf (1.0.21) ... Setting up libparams-classify-perl (0.015-1+b1) ... Setting up python3 (3.7.2-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libmodule-runtime-perl (0.016-1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.003004-2) ... Setting up devscripts (2.19.3) ... Setting up libc6:armhf (2.28-8) ... Setting up libc6-dev:armhf (2.28-8) ... Setting up libgcc1:armhf (1:8.3.0-2) ... Setting up libgomp1:armhf (8.3.0-2) ... Setting up dh-autoreconf (19) ... Setting up libatomic1:armhf (8.3.0-2) ... Setting up dh-strip-nondeterminism (1.1.1-1) ... Setting up libstdc++6:armhf (8.3.0-2) ... Setting up debhelper (12.1.1) ... Setting up libasan5:armhf (8.3.0-2) ... Setting up dh-buildinfo (0.11+nmu2) ... Setting up libubsan1:armhf (8.3.0-2) ... Setting up libgcc-8-dev:armhf (8.3.0-2) ... Setting up libstdc++-8-dev:armhf (8.3.0-2) ... Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Processing triggers for libc-bin (2.28-8) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Initial Foreign Architectures: armhf Arch check ok (armhf included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64) Toolchain package versions: binutils_2.31.1-15 dpkg-dev_1.19.5 g++-8_8.3.0-2 gcc-8_8.3.0-2 libc6-dev_2.28-8 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.3.0-2cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.3.0-2cross1 linux-libc-dev_4.19.20-1 Package versions: adduser_3.118 apt_1.8.0~rc4 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.1 base-passwd_3.5.46 bash_5.0-2 binutils_2.31.1-15 binutils-arm-linux-gnueabihf_2.31.1-15 binutils-common_2.31.1-15 binutils-x86-64-linux-gnu_2.31.1-15 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.6 bzip2_1.0.6-9 ca-certificates_20190110 ccache_3.6-1 cdbs_0.4.159 coreutils_8.30-3 cpp_4:8.3.0-1 cpp-8_8.3.0-2 cpp-8-arm-linux-gnueabihf_8.3.0-2cross1 cpp-arm-linux-gnueabihf_4:8.3.0-1 cross-config_2.6.15-2 crossbuild-essential-armhf_12.6 dash_0.5.10.2-5 debconf_1.5.71 debhelper_12.1.1 debian-archive-keyring_2018.1 debianutils_4.8.6.1 devscripts_2.19.3 dh-autoreconf_19 dh-buildinfo_0.11+nmu2 dh-strip-nondeterminism_1.1.1-1 diffutils_1:3.7-2 dirmngr_2.2.13-1 dpkg_1.19.5 dpkg-cross_2.6.15-2 dpkg-dev_1.19.5 dwz_0.12-3 e2fsprogs_1.45.0-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-4 findutils_4.6.0+git+20190209-2 g++_4:8.3.0-1 g++-8_8.3.0-2 g++-8-arm-linux-gnueabihf_8.3.0-2cross1 g++-arm-linux-gnueabihf_4:8.3.0-1 gcc_4:8.3.0-1 gcc-8_8.3.0-2 gcc-8-arm-linux-gnueabihf_8.3.0-2cross1 gcc-8-arm-linux-gnueabihf-base_8.3.0-2cross1 gcc-8-base_8.3.0-2 gcc-8-cross-base_8.3.0-2cross1 gcc-arm-linux-gnueabihf_4:8.3.0-1 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.13-1 gnupg-l10n_2.2.13-1 gnupg-utils_2.2.13-1 gpg_2.2.13-1 gpg-agent_2.2.13-1 gpg-wks-client_2.2.13-1 gpg-wks-server_2.2.13-1 gpgconf_2.2.13-1 gpgsm_2.2.13-1 gpgv_2.2.13-1 grep_3.3-1 groff-base_1.22.4-3 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-4 libapt-pkg5.0_1.8.0~rc4 libarchive-zip-perl_1.64-1 libasan5_8.3.0-2 libasan5-armhf-cross_8.3.0-2cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-2 libatomic1-armhf-cross_8.3.0-2cross1 libattr1_1:2.4.48-4 libaudit-common_1:2.8.4-2 libaudit1_1:2.8.4-2 libauthen-sasl-perl_2.1600-1 libb-hooks-op-check-perl_0.22-1+b1 libbinutils_2.31.1-15 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9 libc-bin_2.28-8 libc-dev-bin_2.28-8 libc6_2.28-8 libc6-armhf-cross_2.28-7cross1 libc6-dev_2.28-8 libc6-dev-armhf-cross_2.28-7cross1 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-2 libclass-method-modifiers-perl_2.12-1 libcom-err2_1.45.0-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libdata-dump-perl_1.23-1 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.248 libdebian-dpkgcross-perl_2.6.15-2 libdevel-callchecker-perl_0.008-1 libdevel-globaldestruction-perl_0.14-1 libdpkg-perl_1.19.5 libdynaloader-functions-perl_0.003-1 libeatmydata1_105-7 libelf1_0.176-1 libencode-locale-perl_1.05-1 libexpat1_2.2.6-1 libext2fs2_1.45.0-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-listing-perl_6.04-1 libfile-stripnondeterminism-perl_1.1.1-1 libfile-which-perl_1.23-1 libfont-afm-perl_1.20-2 libgcc-8-dev_8.3.0-2 libgcc-8-dev-armhf-cross_8.3.0-2cross1 libgcc1_1:8.3.0-2 libgcc1-armhf-cross_1:8.3.0-2cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-3 libgdbm6_1.18.1-3 libglib2.0-0_2.58.3-1 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.6-2 libgomp1_8.3.0-2 libgomp1-armhf-cross_8.3.0-2cross1 libgpg-error0_1.35-1 libhogweed4_3.4.1-1 libhtml-form-perl_6.03-1 libhtml-format-perl_2.12-1 libhtml-parser-perl_3.72-3+b3 libhtml-tagset-perl_3.20-3 libhtml-tree-perl_5.07-2 libhttp-cookies-perl_6.04-1 libhttp-daemon-perl_6.01-3 libhttp-date-perl_6.02-1 libhttp-message-perl_6.18-1 libhttp-negotiate-perl_6.01-1 libicu63_63.1-6 libidn2-0_2.0.5-1 libimport-into-perl_1.002005-1 libio-html-perl_1.001-1 libio-pty-perl_1:1.08-1.1+b5 libio-socket-ssl-perl_2.060-3 libio-string-perl_1.08-3 libipc-run-perl_20180523.0-1 libisl19_0.20-2 libitm1_8.3.0-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-2 liblwp-mediatypes-perl_6.02-1 liblwp-protocol-https-perl_6.07-2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-4 libmagic1_1:5.35-4 libmailtools-perl_2.18-1 libmodule-runtime-perl_0.016-1 libmoo-perl_2.003004-2 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpdec2_2.4.2-2 libmpfr6_4.0.2-1 libmpx2_8.3.0-2 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnet-http-perl_6.18-1 libnet-smtp-ssl-perl_1.04-1 libnet-ssleay-perl_1.85-2+b1 libnettle6_3.4.1-1 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libparams-classify-perl_0.015-1+b1 libpcre3_2:8.39-11 libperl5.28_5.28.1-4 libpipeline1_1.5.1-2 libpython3-stdlib_3.7.2-1 libpython3.7-minimal_3.7.2-3 libpython3.7-stdlib_3.7.2-3 libquadmath0_8.3.0-2 libreadline7_7.0-5 librole-tiny-perl_2.000006-1 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsigsegv2_2.12-2 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-1 libss2_1.45.0-1 libssl1.1_1.1.1b-1 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.3.0-2cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.3.0-2cross1 libstrictures-perl_2.000005-1 libsub-exporter-progressive-perl_0.001013-1 libsub-quote-perl_2.005001-1 libsystemd0_241-1 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtry-tiny-perl_0.30-1 libtsan0_8.3.0-2 libubsan1_8.3.0-2 libubsan1-armhf-cross_8.3.0-2cross1 libuchardet0_0.0.6-3 libudev1_241-1 libunistring2_0.9.10-1 liburi-perl_1.76-1 libuuid1_2.33.1-0.1 libwww-perl_6.36-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-parser-perl_2.44-4 libxml-sax-base-perl_1.09-1 libxml-sax-expat-perl_0.51-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libyaml-0-2_0.2.1-1 libyaml-libyaml-perl_0.76+repack-1 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.20-1 linux-libc-dev-armhf-cross_4.19.20-1cross1 login_1:4.5-1.1 lsb-base_10.2018112800 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mawk_1.3.3-17+b3 mime-support_3.62 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 netbase_5.6 openssl_1.1.1b-1 passwd_1:4.5-1.1 patch_2.7.6-3 patchutils_0.3.4-2 perl_5.28.1-4 perl-base_5.28.1-4 perl-modules-5.28_5.28.1-4 perl-openssl-defaults_3 pinentry-curses_1.1.0-1+b1 po-debconf_1.0.21 python3_3.7.2-1 python3-minimal_3.7.2-1 python3.7_3.7.2-3 python3.7-minimal_3.7.2-3 readline-common_7.0-5 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-5 tzdata_2018i-2 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-runtime_2.33.1-0.1 wdiff_1.2.2-2+b1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 3.0 (quilt) Source: pcf2bdf Binary: pcf2bdf Architecture: any Version: 1.05-1 Maintainer: Jonas Smedegaard Homepage: https://github.com/ganaware/pcf2bdf Standards-Version: 3.9.6 Vcs-Browser: https://anonscm.debian.org/cgit/collab-maint/pcf2bdf.git Vcs-Git: git://anonscm.debian.org/collab-maint/pcf2bdf Build-Depends: cdbs, devscripts, debhelper, dh-buildinfo Package-List: pcf2bdf deb x11 optional arch=any Checksums-Sha1: bb1340d0bbaf3876279637c859d51035e4223977 10494 pcf2bdf_1.05.orig.tar.gz ab0e0892c6b7944c73e1ef87e00c2a3095ece04d 3992 pcf2bdf_1.05-1.debian.tar.xz Checksums-Sha256: 43ddf6b38c530a7b63c832c2b90c655ac1d36e23ffbe562cb691c998f354ddf6 10494 pcf2bdf_1.05.orig.tar.gz d2e1c3a0d52f4a96c44acb9745402e2faafaeec75dccc914f9fe0d45dc8b68cc 3992 pcf2bdf_1.05-1.debian.tar.xz Files: 10da24c44bf0f3fa301df066f602cd03 10494 pcf2bdf_1.05.orig.tar.gz 383cab04b06476006725c030a59472ad 3992 pcf2bdf_1.05-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBAgAGBQJVWZuHAAoJECx8MUbBoAEhAykP/A3rFAZzX0B5bJoUmheXImWc DqNBOQ0MtueB51DWAbcn/5xAIM6a+MejZ+GDLlIKJ356u28igV4BctEkluD7hNWo 1bdOfYFAQQcw+4abKFDtnAfqnihBmCFVb+bTGIJXhuiUr0+KkZ02hcuiNmJfeJSS GF69zV5irZjGE3AAZJS2J+4waxWsL4XApsK0eY+V+tiuJZ8LLmWSlsGWkHqVoMg8 kx0DnkzSB5IVDC3a+VQ3VBoGepXRfwvNtCW8BsMDrHugcB6mXhMmH4kkOi+Axc3s ShwnWAV9MSucU98S05aVpv3Q8sfvolnpp0gA2SckXDmr5ovUIl7dhhnlkzxJxbmE x+seYXwKMvULYOoWwMAVeLW1sbOHrwI8lc/Sxar+7jqJOsbJbUsItOYSshoeYLJ1 ISmDpdea9IMdK96ngf4X44EYVOsqR77SPVacYkhFKTx3xm2MK4YWMGsA3BFIyJRD VGuBABq2p9ZbmEku5wsiBusvLxl78TwCbO6RYfctZv0pjgr2uKSw/4y7+YUj9dYp 4ra+0ohsY/LH5ZfTrPr76/FmunLwQFHlOfzIfMYH2gx2HoOiS11T9Qq6nXb+0n5K IGAn7XsCg2He0CKDdV5jxSfRSw0uiHPRTeU2WzOgRHIWVUd0Mik1NZstmJ6rTkxK x7sfrqQewnVkakIbJpNe =3ZGF -----END PGP SIGNATURE----- gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Mon May 18 07:57:59 2015 UTC gpgv: using RSA key 2C7C3146C1A00121 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./pcf2bdf_1.05-1.dsc dpkg-source: info: extracting pcf2bdf in /<> dpkg-source: info: unpacking pcf2bdf_1.05.orig.tar.gz dpkg-source: info: unpacking pcf2bdf_1.05-1.debian.tar.xz Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf CCACHE_COMPRESS=1 CCACHE_DIR=/var/cache/ccache-sbuild CCACHE_UMASK=002 CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf DEB_BUILD_OPTIONS=nocheck HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=build PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=1000 SCHROOT_GROUP=build SCHROOT_SESSION_ID=unstable-amd64-sbuild-230553ac-f903-409e-a266-a145f0a5c215 SCHROOT_UID=1000 SCHROOT_USER=build SHELL=/bin/sh USER=build dpkg-buildpackage ----------------- Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16 dpkg-buildpackage: info: source package pcf2bdf dpkg-buildpackage: info: source version 1.05-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jonas Smedegaard dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install CC="arm-linux-gnueabihf-gcc" CXX="arm-linux-gnueabihf-g++" PKG_CONFIG="arm-linux-gnueabihf-pkg-config" /usr/bin/make -f Makefile.gcc -C . CFLAGS="-g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security" CXXFLAGS="-g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-z,relro" PREFIX=/usr -k clean make[1]: Entering directory '/<>' rm -f pcf2bdf pcf2bdf.exe pcf2bdf.o *~ make[1]: Leaving directory '/<>' rm -f debian/copyright_newhints rm -f debian/cdbs-install-list debian/cdbs-package-list debian/stamp-copyright-check rm -rf "debian/upstream-cruft" rm -f debian/stamp-upstream-cruft dh_clean dh_clean: Compatibility levels before 9 are deprecated (level 8 in use) debian/rules build-arch CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules mkdir -p "." Scanning upstream source for new/changed copyright notices... set -e; LC_ALL=C.UTF-8 /usr/bin/licensecheck --check '.*' --recursive --copyright --deb-fmt --ignore '^(debian/(changelog|copyright(|_hints|_newhints)))$' --lines 0 -- * | /usr/lib/cdbs/licensecheck2dep5 > debian/copyright_newhints /bin/sh: 1: /usr/bin/licensecheck: not found 0 combinations of copyright and licensing found. WARNING: New or changed notices discovered: Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ To fix the situation please do the following: 1) Examine debian/copyright_* and referenced files 2) Update debian/copyright as needed 3) Replace debian/copyright_hints with debian/copyright_newhints touch debian/stamp-copyright-check touch debian/stamp-upstream-cruft CC="arm-linux-gnueabihf-gcc" CXX="arm-linux-gnueabihf-g++" PKG_CONFIG="arm-linux-gnueabihf-pkg-config" /usr/bin/make -f Makefile.gcc -C . CFLAGS="-g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security" CXXFLAGS="-g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-z,relro" PREFIX=/usr make[1]: Entering directory '/<>' arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro pcf2bdf.cc -o pcf2bdf make[1]: Leaving directory '/<>' touch debian/stamp-makefile-build fakeroot debian/rules binary-arch CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules dh_testroot dh_prep dh_installdirs -A dh_installdirs: Compatibility levels before 9 are deprecated (level 8 in use) mkdir -p "." CC="arm-linux-gnueabihf-gcc" CXX="arm-linux-gnueabihf-g++" PKG_CONFIG="arm-linux-gnueabihf-pkg-config" /usr/bin/make -f Makefile.gcc -C . CFLAGS="-g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security" CXXFLAGS="-g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-z,relro" PREFIX=/usr install DESTDIR=/<>/debian/pcf2bdf/ make[1]: Entering directory '/<>' install -d /<>/debian/pcf2bdf//usr/bin install pcf2bdf /<>/debian/pcf2bdf//usr/bin install -d /<>/debian/pcf2bdf//usr/share/man/man1 install -m 644 pcf2bdf.man /<>/debian/pcf2bdf//usr/share/man/man1/pcf2bdf.1 make[1]: Leaving directory '/<>' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/pcf2bdf.substvars dh_installdirs -ppcf2bdf \ dh_installdirs: Compatibility levels before 9 are deprecated (level 8 in use) dh_installdocs -ppcf2bdf dh_installdocs: Compatibility levels before 9 are deprecated (level 8 in use) dh_installexamples -ppcf2bdf dh_installexamples: Compatibility levels before 9 are deprecated (level 8 in use) dh_installman -ppcf2bdf dh_installman: Compatibility levels before 9 are deprecated (level 8 in use) dh_installinfo -ppcf2bdf dh_installinfo: Compatibility levels before 9 are deprecated (level 8 in use) dh_installmenu -ppcf2bdf dh_installcron -ppcf2bdf dh_systemd_enable -ppcf2bdf dh_systemd_enable: Compatibility levels before 9 are deprecated (level 8 in use) dh_installinit -ppcf2bdf dh_installinit: Compatibility levels before 9 are deprecated (level 8 in use) dh_installdebconf -ppcf2bdf dh_installemacsen -ppcf2bdf dh_installcatalogs -ppcf2bdf dh_installpam -ppcf2bdf dh_installlogrotate -ppcf2bdf dh_installlogcheck -ppcf2bdf dh_installchangelogs -ppcf2bdf dh_installchangelogs: Compatibility levels before 9 are deprecated (level 8 in use) dh_installudev -ppcf2bdf dh_lintian -ppcf2bdf dh_bugfiles -ppcf2bdf dh_install -ppcf2bdf dh_install: Compatibility levels before 9 are deprecated (level 8 in use) dh_systemd_start -ppcf2bdf dh_systemd_start: Compatibility levels before 9 are deprecated (level 8 in use) dh_link -ppcf2bdf dh_buildinfo -ppcf2bdf dh_installmime -ppcf2bdf dh_installgsettings -ppcf2bdf dh_strip -ppcf2bdf dh_strip: Compatibility levels before 9 are deprecated (level 8 in use) dh_strip_nondeterminism -ppcf2bdf dh_compress -ppcf2bdf dh_compress: Compatibility levels before 9 are deprecated (level 8 in use) dh_fixperms -ppcf2bdf dh_makeshlibs -ppcf2bdf dh_installdeb -ppcf2bdf dh_installdeb: Compatibility levels before 9 are deprecated (level 8 in use) dh_perl -ppcf2bdf dh_shlibdeps -ppcf2bdf dh_shlibdeps: Compatibility levels before 9 are deprecated (level 8 in use) dh_gencontrol -ppcf2bdf dh_md5sums -ppcf2bdf dh_builddeb -ppcf2bdf dpkg-deb: building package 'pcf2bdf-dbgsym' in '../pcf2bdf-dbgsym_1.05-1_armhf.deb'. dpkg-deb: building package 'pcf2bdf' in '../pcf2bdf_1.05-1_armhf.deb'. dpkg-genbuildinfo --build=any dpkg-genchanges --build=any >../pcf2bdf_1.05-1_armhf.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2019-03-07T19:22:57Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ pcf2bdf_1.05-1_armhf.changes: ----------------------------- Format: 1.8 Date: Mon, 18 May 2015 09:51:15 +0200 Source: pcf2bdf Binary: pcf2bdf pcf2bdf-dbgsym Built-For-Profiles: cross nocheck Architecture: armhf Version: 1.05-1 Distribution: unstable-amd64-sbuild Urgency: medium Maintainer: Jonas Smedegaard Changed-By: Jonas Smedegaard Description: pcf2bdf - convert X11 font from PCF to BDF format Changes: pcf2bdf (1.05-1) unstable; urgency=medium . [ upstream ] * New release. + Have size come from POINT_SIZE instead of PIXEL_SIZE. + Have internal quotation characters in a string property indicated (or "quoted”) by using two quotation characters in a row. + Fix avoid crash with large compressed metrics tables. + Fix support gzipped source. + Fix use C++ compiler and simplify using GNU extensions. + Other fixes. . [ Jonas Smedegaard ] * Fix watch file URL and CDBS upstream-tarball hint. * Update copyright info: Extend coverage for upstream author. * Drop all patches: Adopted upstream. Checksums-Sha1: c6c6a4633437e453dcdcf8bb5080a415419f5c19 25104 pcf2bdf-dbgsym_1.05-1_armhf.deb 65d493427ec78416267f7145700bddafd3686443 7234 pcf2bdf_1.05-1_armhf.buildinfo 964fb224c75f7851489cc5684068e43a0e69de5e 13008 pcf2bdf_1.05-1_armhf.deb Checksums-Sha256: b202d3628653202ac23e2ede019b7a32a17dd1e2f53c8f908d807627c2d39d54 25104 pcf2bdf-dbgsym_1.05-1_armhf.deb b4077d89e462a78b29b37bffc9d1d6649169b212448f3ce7035af706bf9735b2 7234 pcf2bdf_1.05-1_armhf.buildinfo d99c14dc668b1a4545c40b1e0bf36efaf248eb20918601a05d86d6042e440f99 13008 pcf2bdf_1.05-1_armhf.deb Files: f498353022af9fa656916643a4ced6ce 25104 debug optional pcf2bdf-dbgsym_1.05-1_armhf.deb 4ef913f111966527b2c59e8759f8ff46 7234 x11 optional pcf2bdf_1.05-1_armhf.buildinfo b00d65f3bac8bb96ce7b8713556034f8 13008 x11 optional pcf2bdf_1.05-1_armhf.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: pcf2bdf Binary: pcf2bdf Architecture: armhf Version: 1.05-1 Checksums-Md5: f498353022af9fa656916643a4ced6ce 25104 pcf2bdf-dbgsym_1.05-1_armhf.deb b00d65f3bac8bb96ce7b8713556034f8 13008 pcf2bdf_1.05-1_armhf.deb Checksums-Sha1: c6c6a4633437e453dcdcf8bb5080a415419f5c19 25104 pcf2bdf-dbgsym_1.05-1_armhf.deb 964fb224c75f7851489cc5684068e43a0e69de5e 13008 pcf2bdf_1.05-1_armhf.deb Checksums-Sha256: b202d3628653202ac23e2ede019b7a32a17dd1e2f53c8f908d807627c2d39d54 25104 pcf2bdf-dbgsym_1.05-1_armhf.deb d99c14dc668b1a4545c40b1e0bf36efaf248eb20918601a05d86d6042e440f99 13008 pcf2bdf_1.05-1_armhf.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Thu, 07 Mar 2019 19:22:57 +0000 Build-Path: /<> Installed-Build-Depends: adduser (= 3.118), autoconf (= 2.69-11), automake (= 1:1.16.1-4), autopoint (= 0.19.8.1-9), autotools-dev (= 20180224.1), base-files (= 10.1), base-passwd (= 3.5.46), bash (= 5.0-2), binutils (= 2.31.1-15), binutils-common (= 2.31.1-15), binutils-x86-64-linux-gnu (= 2.31.1-15), bsdmainutils (= 11.1.2+b1), bsdutils (= 1:2.33.1-0.1), build-essential (= 12.6), bzip2 (= 1.0.6-9), ca-certificates (= 20190110), cdbs (= 0.4.159), coreutils (= 8.30-3), cpp (= 4:8.3.0-1), cpp-8 (= 8.3.0-2), dash (= 0.5.10.2-5), debconf (= 1.5.71), debhelper (= 12.1.1), debianutils (= 4.8.6.1), devscripts (= 2.19.3), dh-autoreconf (= 19), dh-buildinfo (= 0.11+nmu2), dh-strip-nondeterminism (= 1.1.1-1), diffutils (= 1:3.7-2), dirmngr (= 2.2.13-1), dpkg (= 1.19.5), dpkg-dev (= 1.19.5), dwz (= 0.12-3), fakeroot (= 1.23-1), fdisk (= 2.33.1-0.1), file (= 1:5.35-4), findutils (= 4.6.0+git+20190209-2), g++ (= 4:8.3.0-1), g++-8 (= 8.3.0-2), gcc (= 4:8.3.0-1), gcc-8 (= 8.3.0-2), gcc-8-base (= 8.3.0-2), gettext (= 0.19.8.1-9), gettext-base (= 0.19.8.1-9), gnupg (= 2.2.13-1), gnupg-l10n (= 2.2.13-1), gnupg-utils (= 2.2.13-1), gpg (= 2.2.13-1), gpg-agent (= 2.2.13-1), gpg-wks-client (= 2.2.13-1), gpg-wks-server (= 2.2.13-1), gpgconf (= 2.2.13-1), gpgsm (= 2.2.13-1), gpgv (= 2.2.13-1), grep (= 3.3-1), groff-base (= 1.22.4-3), gzip (= 1.9-3), hostname (= 3.21), init-system-helpers (= 1.56+nmu1), intltool-debian (= 0.35.0+20060710.5), libacl1 (= 2.2.53-4), libarchive-zip-perl (= 1.64-1), libasan5 (= 8.3.0-2), libassuan0 (= 2.5.2-1), libatomic1 (= 8.3.0-2), libattr1 (= 1:2.4.48-4), libaudit-common (= 1:2.8.4-2), libaudit1 (= 1:2.8.4-2), libb-hooks-op-check-perl (= 0.22-1+b1), libbinutils (= 2.31.1-15), libblkid1 (= 2.33.1-0.1), libbsd0 (= 0.9.1-2), libbz2-1.0 (= 1.0.6-9), libc-bin (= 2.28-8), libc-dev-bin (= 2.28-8), libc6 (= 2.28-8), libc6-dev (= 2.28-8), libcap-ng0 (= 0.7.9-2), libcc1-0 (= 8.3.0-2), libclass-method-modifiers-perl (= 2.12-1), libcroco3 (= 0.6.12-3), libdb5.3 (= 5.3.28+dfsg1-0.5), libdebconfclient0 (= 0.248), libdevel-callchecker-perl (= 0.008-1), libdevel-globaldestruction-perl (= 0.14-1), libdpkg-perl (= 1.19.5), libdynaloader-functions-perl (= 0.003-1), libelf1 (= 0.176-1), libencode-locale-perl (= 1.05-1), libexpat1 (= 2.2.6-1), libfakeroot (= 1.23-1), libfdisk1 (= 2.33.1-0.1), libffi6 (= 3.2.1-9), libfile-homedir-perl (= 1.004-1), libfile-listing-perl (= 6.04-1), libfile-stripnondeterminism-perl (= 1.1.1-1), libfile-which-perl (= 1.23-1), libgcc-8-dev (= 8.3.0-2), libgcc1 (= 1:8.3.0-2), libgcrypt20 (= 1.8.4-5), libgdbm-compat4 (= 1.18.1-3), libgdbm6 (= 1.18.1-3), libglib2.0-0 (= 2.58.3-1), libgmp10 (= 2:6.1.2+dfsg-4), libgnutls30 (= 3.6.6-2), libgomp1 (= 8.3.0-2), libgpg-error0 (= 1.35-1), libhogweed4 (= 3.4.1-1), libhtml-parser-perl (= 3.72-3+b3), libhtml-tagset-perl (= 3.20-3), libhtml-tree-perl (= 5.07-2), libhttp-cookies-perl (= 6.04-1), libhttp-date-perl (= 6.02-1), libhttp-message-perl (= 6.18-1), libhttp-negotiate-perl (= 6.01-1), libicu63 (= 63.1-6), libidn2-0 (= 2.0.5-1), libimport-into-perl (= 1.002005-1), libio-html-perl (= 1.001-1), libio-pty-perl (= 1:1.08-1.1+b5), libio-socket-ssl-perl (= 2.060-3), libipc-run-perl (= 20180523.0-1), libisl19 (= 0.20-2), libitm1 (= 8.3.0-2), libksba8 (= 1.3.5-2), libldap-2.4-2 (= 2.4.47+dfsg-3), libldap-common (= 2.4.47+dfsg-3), liblsan0 (= 8.3.0-2), liblwp-mediatypes-perl (= 6.02-1), liblwp-protocol-https-perl (= 6.07-2), liblz4-1 (= 1.8.3-1), liblzma5 (= 5.2.4-1), libmagic-mgc (= 1:5.35-4), libmagic1 (= 1:5.35-4), libmodule-runtime-perl (= 0.016-1), libmoo-perl (= 2.003004-2), libmount1 (= 2.33.1-0.1), libmpc3 (= 1.1.0-1), libmpdec2 (= 2.4.2-2), libmpfr6 (= 4.0.2-1), libmpx2 (= 8.3.0-2), libncurses6 (= 6.1+20181013-2), libncursesw6 (= 6.1+20181013-2), libnet-http-perl (= 6.18-1), libnet-ssleay-perl (= 1.85-2+b1), libnettle6 (= 3.4.1-1), libnpth0 (= 1.6-1), libp11-kit0 (= 0.23.15-2), libpam-modules (= 1.3.1-5), libpam-modules-bin (= 1.3.1-5), libpam-runtime (= 1.3.1-5), libpam0g (= 1.3.1-5), libparams-classify-perl (= 0.015-1+b1), libpcre3 (= 2:8.39-11), libperl5.28 (= 5.28.1-4), libpipeline1 (= 1.5.1-2), libpython3-stdlib (= 3.7.2-1), libpython3.7-minimal (= 3.7.2-3), libpython3.7-stdlib (= 3.7.2-3), libquadmath0 (= 8.3.0-2), libreadline7 (= 7.0-5), librole-tiny-perl (= 2.000006-1), libsasl2-2 (= 2.1.27+dfsg-1), libsasl2-modules-db (= 2.1.27+dfsg-1), libseccomp2 (= 2.3.3-4), libselinux1 (= 2.8-1+b1), libsemanage-common (= 2.8-2), libsemanage1 (= 2.8-2), libsepol1 (= 2.8-1), libsigsegv2 (= 2.12-2), libsmartcols1 (= 2.33.1-0.1), libsqlite3-0 (= 3.27.2-1), libssl1.1 (= 1.1.1b-1), libstdc++-8-dev (= 8.3.0-2), libstdc++6 (= 8.3.0-2), libstrictures-perl (= 2.000005-1), libsub-exporter-progressive-perl (= 0.001013-1), libsub-quote-perl (= 2.005001-1), libsystemd0 (= 241-1), libtasn1-6 (= 4.13-3), libtimedate-perl (= 2.3000-2), libtinfo6 (= 6.1+20181013-2), libtool (= 2.4.6-10), libtry-tiny-perl (= 0.30-1), libtsan0 (= 8.3.0-2), libubsan1 (= 8.3.0-2), libuchardet0 (= 0.0.6-3), libudev1 (= 241-1), libunistring2 (= 0.9.10-1), liburi-perl (= 1.76-1), libuuid1 (= 2.33.1-0.1), libwww-perl (= 6.36-1), libwww-robotrules-perl (= 6.02-1), libxml2 (= 2.9.4+dfsg1-7+b3), linux-libc-dev (= 4.19.20-1), login (= 1:4.5-1.1), lsb-base (= 10.2018112800), m4 (= 1.4.18-2), make (= 4.2.1-1.2), man-db (= 2.8.5-2), mawk (= 1.3.3-17+b3), mime-support (= 3.62), ncurses-base (= 6.1+20181013-2), ncurses-bin (= 6.1+20181013-2), netbase (= 5.6), openssl (= 1.1.1b-1), passwd (= 1:4.5-1.1), patch (= 2.7.6-3), patchutils (= 0.3.4-2), perl (= 5.28.1-4), perl-base (= 5.28.1-4), perl-modules-5.28 (= 5.28.1-4), perl-openssl-defaults (= 3), pinentry-curses (= 1.1.0-1+b1), po-debconf (= 1.0.21), python3 (= 3.7.2-1), python3-minimal (= 3.7.2-1), python3.7 (= 3.7.2-3), python3.7-minimal (= 3.7.2-3), readline-common (= 7.0-5), sed (= 4.7-1), sensible-utils (= 0.0.12), sysvinit-utils (= 2.93-8), tar (= 1.30+dfsg-5), util-linux (= 2.33.1-0.1), wdiff (= 1.2.2-2+b1), xz-utils (= 5.2.4-1), zlib1g (= 1:1.2.11.dfsg-1) Environment: DEB_BUILD_OPTIONS="nocheck parallel=16" DEB_BUILD_PROFILES="cross nocheck" LANG="en_US.UTF-8" LC_ALL="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" MAKEFLAGS=" -j16" SOURCE_DATE_EPOCH="1431935475" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ pcf2bdf-dbgsym_1.05-1_armhf.deb ------------------------------- new Debian package, version 2.0. size 25104 bytes: control archive=512 bytes. 325 bytes, 12 lines control 106 bytes, 1 lines md5sums Package: pcf2bdf-dbgsym Source: pcf2bdf Version: 1.05-1 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Jonas Smedegaard Installed-Size: 40 Depends: pcf2bdf (= 1.05-1) Section: debug Priority: optional Description: debug symbols for pcf2bdf Build-Ids: e4c1a12e0abca80cbc2a9e97dd04b46a2be87efa drwxr-xr-x root/root 0 2015-05-18 07:51 ./ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/lib/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/lib/debug/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/lib/debug/.build-id/e4/ -rw-r--r-- root/root 29928 2015-05-18 07:51 ./usr/lib/debug/.build-id/e4/c1a12e0abca80cbc2a9e97dd04b46a2be87efa.debug drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/share/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/share/doc/ lrwxrwxrwx root/root 0 2015-05-18 07:51 ./usr/share/doc/pcf2bdf-dbgsym -> pcf2bdf pcf2bdf_1.05-1_armhf.deb ------------------------ new Debian package, version 2.0. size 13008 bytes: control archive=804 bytes. 545 bytes, 15 lines control 333 bytes, 5 lines md5sums Package: pcf2bdf Version: 1.05-1 Architecture: armhf Maintainer: Jonas Smedegaard Installed-Size: 34 Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.5), libstdc++6 (>= 4.9) Section: x11 Priority: optional Homepage: https://github.com/ganaware/pcf2bdf Description: convert X11 font from PCF to BDF format Pcf2bdf is a font de-compiler. It converts an X11 font from Portable Compiled Format (PCF) to Bitmap Distribution Format (BDF). . FONTBOUNDINGBOX in a BDF file is not used by bdftopcf, so pcf2bdf generates irresponsible values. drwxr-xr-x root/root 0 2015-05-18 07:51 ./ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/bin/ -rwxr-xr-x root/root 18016 2015-05-18 07:51 ./usr/bin/pcf2bdf drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/share/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/share/doc/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/share/doc/pcf2bdf/ -rw-r--r-- root/root 556 2015-05-18 07:51 ./usr/share/doc/pcf2bdf/buildinfo_armhf.gz -rw-r--r-- root/root 1668 2015-05-18 07:51 ./usr/share/doc/pcf2bdf/changelog.Debian.gz -rw-r--r-- root/root 2264 2015-05-18 07:45 ./usr/share/doc/pcf2bdf/copyright drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/share/man/ drwxr-xr-x root/root 0 2015-05-18 07:51 ./usr/share/man/man1/ -rw-r--r-- root/root 503 2015-05-18 07:51 ./usr/share/man/man1/pcf2bdf.1.gz lintian ------- Setup apt archive ----------------- Merged Build-Depends: lintian:amd64 Filtered Build-Depends: lintian:amd64 dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<>/apt_archive/sbuild-build-depends-lintian-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [963 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [534 B] Get:5 copy:/<>/apt_archive ./ Packages [618 B] Fetched 2115 B in 0s (173 kB/s) Reading package lists... Reading package lists... Install lintian build dependencies (apt-based resolver) ------------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian t1utils Suggested packages: libhtml-template-perl binutils-multiarch libtext-template-perl Recommended packages: libcgi-fast-perl libasync-mergepoint-perl libsereal-perl libtest-fatal-perl libtest-refcount-perl libdigest-bubblebabble-perl libnet-dns-sec-perl libnet-libidn-perl libunicode-utf8-perl libperlio-gzip-perl The following NEW packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian sbuild-build-depends-lintian-dummy:armhf t1utils 0 upgraded, 25 newly installed, 0 to remove and 0 not upgraded. Need to get 2712 kB/2746 kB of archives. After this operation, 8758 kB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [844 B] Get:2 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libapt-pkg-perl amd64 0.1.34+b1 [71.2 kB] Get:3 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB] Get:4 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libcgi-pm-perl all 4.40-1 [222 kB] Get:5 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB] Get:6 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB] Get:7 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB] Get:8 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB] Get:9 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB] Get:10 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-dns-perl all 1.19-1 [372 kB] Get:11 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB] Get:12 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB] Get:13 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB] Get:14 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB] Get:15 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB] Get:16 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libfuture-perl all 0.39-1 [74.5 kB] Get:17 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB] Get:18 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libio-async-perl all 0.72-1 [262 kB] Get:19 http://cdn-fastly.deb.debian.org/debian sid/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB] Get:20 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB] Get:21 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB] Get:22 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB] Get:23 http://cdn-fastly.deb.debian.org/debian sid/main amd64 t1utils amd64 1.41-3 [62.3 kB] Get:24 http://cdn-fastly.deb.debian.org/debian sid/main amd64 lintian all 2.9.1 [1193 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2712 kB in 6s (440 kB/s) Selecting previously unselected package diffstat. (Reading database ... 20674 files and directories currently installed.) Preparing to unpack .../00-diffstat_1.62-1_amd64.deb ... Unpacking diffstat (1.62-1) ... Selecting previously unselected package libapt-pkg-perl. Preparing to unpack .../01-libapt-pkg-perl_0.1.34+b1_amd64.deb ... Unpacking libapt-pkg-perl (0.1.34+b1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../02-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../03-libcgi-pm-perl_4.40-1_all.deb ... Unpacking libcgi-pm-perl (4.40-1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../04-libsub-name-perl_0.21-1+b3_amd64.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libclass-accessor-perl. Preparing to unpack .../05-libclass-accessor-perl_0.51-1_all.deb ... Unpacking libclass-accessor-perl (0.51-1) ... Selecting previously unselected package libclone-perl. Preparing to unpack .../06-libclone-perl_0.41-1+b1_amd64.deb ... Unpacking libclone-perl (0.41-1+b1) ... Selecting previously unselected package libdigest-hmac-perl. Preparing to unpack .../07-libdigest-hmac-perl_1.03+dfsg-2_all.deb ... Unpacking libdigest-hmac-perl (1.03+dfsg-2) ... Selecting previously unselected package libnet-ip-perl. Preparing to unpack .../08-libnet-ip-perl_1.26-2_all.deb ... Unpacking libnet-ip-perl (1.26-2) ... Selecting previously unselected package libnet-dns-perl. Preparing to unpack .../09-libnet-dns-perl_1.19-1_all.deb ... Unpacking libnet-dns-perl (1.19-1) ... Selecting previously unselected package libnet-domain-tld-perl. Preparing to unpack .../10-libnet-domain-tld-perl_1.75-1_all.deb ... Unpacking libnet-domain-tld-perl (1.75-1) ... Selecting previously unselected package libemail-valid-perl. Preparing to unpack .../11-libemail-valid-perl_1.202-1_all.deb ... Unpacking libemail-valid-perl (1.202-1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../12-libexporter-tiny-perl_1.002001-1_all.deb ... Unpacking libexporter-tiny-perl (1.002001-1) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../13-libipc-system-simple-perl_1.25-4_all.deb ... Unpacking libipc-system-simple-perl (1.25-4) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../14-libfile-basedir-perl_0.08-1_all.deb ... Unpacking libfile-basedir-perl (0.08-1) ... Selecting previously unselected package libfuture-perl. Preparing to unpack .../15-libfuture-perl_0.39-1_all.deb ... Unpacking libfuture-perl (0.39-1) ... Selecting previously unselected package libstruct-dumb-perl. Preparing to unpack .../16-libstruct-dumb-perl_0.09-1_all.deb ... Unpacking libstruct-dumb-perl (0.09-1) ... Selecting previously unselected package libio-async-perl. Preparing to unpack .../17-libio-async-perl_0.72-1_all.deb ... Unpacking libio-async-perl (0.72-1) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../18-liblist-moreutils-perl_0.416-1+b4_amd64.deb ... Unpacking liblist-moreutils-perl (0.416-1+b4) ... Selecting previously unselected package libparse-debianchangelog-perl. Preparing to unpack .../19-libparse-debianchangelog-perl_1.2.0-13_all.deb ... Unpacking libparse-debianchangelog-perl (1.2.0-13) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../20-libpath-tiny-perl_0.108-1_all.deb ... Unpacking libpath-tiny-perl (0.108-1) ... Selecting previously unselected package libtext-levenshtein-perl. Preparing to unpack .../21-libtext-levenshtein-perl_0.13-1_all.deb ... Unpacking libtext-levenshtein-perl (0.13-1) ... Selecting previously unselected package t1utils. Preparing to unpack .../22-t1utils_1.41-3_amd64.deb ... Unpacking t1utils (1.41-3) ... Selecting previously unselected package lintian. Preparing to unpack .../23-lintian_2.9.1_all.deb ... Unpacking lintian (2.9.1) ... Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf. Preparing to unpack .../24-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Setting up libapt-pkg-perl (0.1.34+b1) ... Setting up libstruct-dumb-perl (0.09-1) ... Setting up libclone-perl (0.41-1+b1) ... Setting up libfuture-perl (0.39-1) ... Setting up libcgi-pm-perl (4.40-1) ... Setting up libtext-levenshtein-perl (0.13-1) ... Setting up libio-async-perl (0.72-1) ... Setting up libdigest-hmac-perl (1.03+dfsg-2) ... Setting up libipc-system-simple-perl (1.25-4) ... Setting up libnet-domain-tld-perl (1.75-1) ... Setting up t1utils (1.41-3) ... Setting up diffstat (1.62-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up libpath-tiny-perl (0.108-1) ... Setting up libexporter-tiny-perl (1.002001-1) ... Setting up libclass-accessor-perl (0.51-1) ... Setting up libnet-ip-perl (1.26-2) ... Setting up libfile-basedir-perl (0.08-1) ... Setting up liblist-moreutils-perl (0.416-1+b4) ... Setting up libnet-dns-perl (1.19-1) ... Setting up libparse-debianchangelog-perl (1.2.0-13) ... Setting up libemail-valid-perl (1.202-1) ... Setting up lintian (2.9.1) ... Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Processing triggers for man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. W: pcf2bdf source: package-uses-deprecated-debhelper-compat-version 8 W: pcf2bdf source: vcs-obsolete-in-debian-infrastructure vcs-git git://anonscm.debian.org/collab-maint/pcf2bdf W: pcf2bdf source: vcs-obsolete-in-debian-infrastructure vcs-browser https://anonscm.debian.org/cgit/collab-maint/pcf2bdf.git W: pcf2bdf source: ancient-standards-version 3.9.6 (released 2014-09-17) (current is 4.3.0) I: Lintian run was successful. +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following packages will be REMOVED: autoconf* automake* autopoint* autotools-dev* bsdmainutils* cdbs* debhelper* devscripts* dh-autoreconf* dh-buildinfo* dh-strip-nondeterminism* diffstat* dwz* gcc-8-base:armhf* gettext* gettext-base* groff-base* intltool-debian* libapt-pkg-perl* libarchive-zip-perl* libasan5:armhf* libatomic1:armhf* libb-hooks-op-check-perl* libbsd0* libc6:armhf* libc6-dev:armhf* libcapture-tiny-perl* libcgi-pm-perl* libclass-accessor-perl* libclass-method-modifiers-perl* libclone-perl* libcroco3* libdevel-callchecker-perl* libdevel-globaldestruction-perl* libdigest-hmac-perl* libdynaloader-functions-perl* libelf1* libemail-valid-perl* libexporter-tiny-perl* libfile-basedir-perl* libfile-stripnondeterminism-perl* libfuture-perl* libgcc-8-dev:armhf* libgcc1:armhf* libglib2.0-0* libgomp1:armhf* libimport-into-perl* libio-async-perl* libio-pty-perl* libipc-run-perl* libipc-system-simple-perl* liblist-moreutils-perl* libmodule-runtime-perl* libmoo-perl* libmpdec2* libncurses6* libnet-dns-perl* libnet-domain-tld-perl* libnet-ip-perl* libparams-classify-perl* libparse-debianchangelog-perl* libpath-tiny-perl* libpipeline1* libpython3-stdlib* libpython3.7-minimal* libpython3.7-stdlib* librole-tiny-perl* libsigsegv2* libstdc++-8-dev:armhf* libstdc++6:armhf* libstrictures-perl* libstruct-dumb-perl* libsub-exporter-progressive-perl* libsub-name-perl* libsub-quote-perl* libtext-levenshtein-perl* libtool* libubsan1:armhf* libuchardet0* lintian* linux-libc-dev:armhf* m4* man-db* mime-support* patchutils* po-debconf* python3* python3-minimal* python3.7* python3.7-minimal* sbuild-build-depends-lintian-dummy:armhf* sbuild-build-depends-main-dummy:armhf* t1utils* wdiff* 0 upgraded, 0 newly installed, 94 to remove and 0 not upgraded. After this operation, 116 MB disk space will be freed. (Reading database ... 21869 files and directories currently installed.) Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Removing dh-buildinfo (0.11+nmu2) ... Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Removing lintian (2.9.1) ... Removing cdbs (0.4.159) ... Removing devscripts (2.19.3) ... Removing diffstat (1.62-1) ... Removing libstdc++-8-dev:armhf (8.3.0-2) ... Removing libgcc-8-dev:armhf (8.3.0-2) ... Removing libubsan1:armhf (8.3.0-2) ... Removing libasan5:armhf (8.3.0-2) ... Removing libstdc++6:armhf (8.3.0-2) ... Removing libapt-pkg-perl (0.1.34+b1) ... Removing libatomic1:armhf (8.3.0-2) ... Removing libmoo-perl (2.003004-2) ... Removing libimport-into-perl (1.002005-1) ... Removing libmodule-runtime-perl (0.016-1) ... Removing libparams-classify-perl (0.015-1+b1) ... Removing libdevel-callchecker-perl (0.008-1) ... Removing libb-hooks-op-check-perl (0.22-1+b1) ... Removing libc6-dev:armhf (2.28-8) ... Removing libgomp1:armhf (8.3.0-2) ... Removing libcapture-tiny-perl (0.48-1) ... Removing libparse-debianchangelog-perl (1.2.0-13) ... Removing libcgi-pm-perl (4.40-1) ... Removing libclass-accessor-perl (0.51-1) ... Removing librole-tiny-perl (2.000006-1) ... Removing libclass-method-modifiers-perl (2.12-1) ... Removing libclone-perl (0.41-1+b1) ... Removing libdevel-globaldestruction-perl (0.14-1) ... Removing libemail-valid-perl (1.202-1) ... Removing libnet-dns-perl (1.19-1) ... Removing libdigest-hmac-perl (1.03+dfsg-2) ... Removing libdynaloader-functions-perl (0.003-1) ... Removing liblist-moreutils-perl (0.416-1+b4) ... Removing libexporter-tiny-perl (1.002001-1) ... Removing libfile-basedir-perl (0.08-1) ... Removing libio-async-perl (0.72-1) ... Removing libfuture-perl (0.39-1) ... Removing libipc-run-perl (20180523.0-1) ... Removing libio-pty-perl (1:1.08-1.1+b5) ... Removing libipc-system-simple-perl (1.25-4) ... Removing python3 (3.7.2-1) ... Removing python3.7 (3.7.2-3) ... Removing libpython3-stdlib:amd64 (3.7.2-1) ... Removing libpython3.7-stdlib:amd64 (3.7.2-3) ... find: ‘/usr/lib/python3’: No such file or directory Removing libmpdec2:amd64 (2.4.2-2) ... Removing libnet-domain-tld-perl (1.75-1) ... Removing libnet-ip-perl (1.26-2) ... Removing libpath-tiny-perl (0.108-1) ... Removing python3-minimal (3.7.2-1) ... Removing python3.7-minimal (3.7.2-3) ... Removing libpython3.7-minimal:amd64 (3.7.2-3) ... find: ‘/usr/lib/python3’: No such file or directory Removing libstrictures-perl (2.000005-1) ... Removing libstruct-dumb-perl (0.09-1) ... Removing libsub-exporter-progressive-perl (0.001013-1) ... Removing libsub-name-perl (0.21-1+b3) ... Removing libsub-quote-perl (2.005001-1) ... Removing libtext-levenshtein-perl (0.13-1) ... Removing linux-libc-dev:armhf (4.19.20-1) ... Removing mime-support (3.62) ... Removing patchutils (0.3.4-2) ... Removing t1utils (1.41-3) ... Removing wdiff (1.2.2-2+b1) ... Removing dh-strip-nondeterminism (1.1.1-1) ... Removing libfile-stripnondeterminism-perl (1.1.1-1) ... Removing libarchive-zip-perl (1.64-1) ... Removing libgcc1:armhf (1:8.3.0-2) ... Removing debhelper (12.1.1) ... Removing dh-autoreconf (19) ... Removing automake (1:1.16.1-4) ... Removing autoconf (2.69-11) ... Removing autopoint (0.19.8.1-9) ... Removing libtool (2.4.6-10) ... Removing autotools-dev (20180224.1) ... Removing man-db (2.8.5-2) ... Removing bsdmainutils (11.1.2+b1) ... Removing dwz (0.12-3) ... Removing gcc-8-base:armhf (8.3.0-2) ... Removing po-debconf (1.0.21) ... Removing intltool-debian (0.35.0+20060710.5) ... Removing gettext (0.19.8.1-9) ... Removing gettext-base (0.19.8.1-9) ... Removing groff-base (1.22.4-3) ... Removing libbsd0:amd64 (0.9.1-2) ... Removing libc6:armhf (2.28-8) ... Removing libcroco3:amd64 (0.6.12-3) ... Removing libelf1:amd64 (0.176-1) ... Removing libglib2.0-0:amd64 (2.58.3-1) ... Removing libncurses6:amd64 (6.1+20181013-2) ... Removing libpipeline1:amd64 (1.5.1-2) ... Removing m4 (1.4.18-2) ... Removing libsigsegv2:amd64 (2.12-2) ... Removing libuchardet0:amd64 (0.0.6-3) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... Processing triggers for libc-bin (2.28-8) ... (Reading database ... 16475 files and directories currently installed.) Purging configuration files for mime-support (3.62) ... Purging configuration files for libglib2.0-0:amd64 (2.58.3-1) ... Purging configuration files for lintian (2.9.1) ... Purging configuration files for python3 (3.7.2-1) ... Purging configuration files for man-db (2.8.5-2) ... Purging configuration files for libpython3.7-minimal:amd64 (3.7.2-3) ... Purging configuration files for devscripts (2.19.3) ... Purging configuration files for bsdmainutils (11.1.2+b1) ... Purging configuration files for python3.7-minimal (3.7.2-3) ... Purging configuration files for autoconf (2.69-11) ... Purging configuration files for libc6:armhf (2.28-8) ... Purging configuration files for groff-base (1.22.4-3) ... +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any Build-Space: n/a Build-Time: 6 Distribution: unstable-amd64-sbuild Foreign Architectures: armhf Host Architecture: armhf Install-Time: 15 Job: /home/build/sbuild-setup/repo/pool/main/p/pcf2bdf/pcf2bdf_1.05-1.dsc Lintian: warn Machine Architecture: amd64 Package: pcf2bdf Package-Time: 24 Source-Version: 1.05-1 Space: n/a Status: successful Version: 1.05-1 -------------------------------------------------------------------------------- Finished at 2019-03-07T19:22:57Z Build needed 00:00:24, no disk space