sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 8e0e35ca7d18

+==============================================================================+
| sratom 0.6.4-1 (armhf)                       Sat, 21 Dec 2019 12:56:23 +0000 |
+==============================================================================+

Package: sratom
Version: 0.6.4-1
Source Version: 0.6.4-1
Distribution: unstable-amd64-sbuild
Machine Architecture: amd64
Host Architecture: armhf
Build Architecture: amd64
Build Profiles: cross nocheck
Build Type: any

I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-cf6a4a78-6c32-47c8-be81-d35fb56b116f' with '<<CHROOT>>'
I: NOTICE: Log filtering will replace 'build/sratom-ep4Un8/resolver-PWNNZP' with '<<RESOLVERDIR>>'

+------------------------------------------------------------------------------+
| Update chroot                                                                |
+------------------------------------------------------------------------------+

Hit:1 http://deb.debian.org/debian unstable InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages were automatically installed and are no longer required:
  dbus krb5-locales libapparmor1 libatk1.0-0 libavahi-client3
  libavahi-common-data libavahi-common3 libcups2 libdbus-1-3 libgail-common
  libgail18 libgssapi-krb5-2 libgtk2.0-0 libgtk2.0-bin libgts-0.7-5 libgts-bin
  libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libxcomposite1
  libxcursor1 libxdamage1 libxfixes3 libxi6 libxinerama1 libxrandr2
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

+------------------------------------------------------------------------------+
| Fetch source files                                                           |
+------------------------------------------------------------------------------+


Local sources
-------------

/home/build/sbuild-setup/repo/pool/main/s/sratom/sratom_0.6.4-1.dsc exists in /home/build/sbuild-setup/repo/pool/main/s/sratom; copying to chroot
I: NOTICE: Log filtering will replace 'build/sratom-ep4Un8/sratom-0.6.4' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/sratom-ep4Un8' with '<<BUILDDIR>>'

+------------------------------------------------------------------------------+
| Install package build dependencies                                           |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: debhelper-compat (= 12), libserd-dev (>= 0.30), libsord-dev (>= 0.14), lv2-dev (>= 1.16), pkg-config, python3:amd64, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf
Filtered Build-Depends: debhelper-compat (= 12), libserd-dev (>= 0.30), libsord-dev (>= 0.14), lv2-dev (>= 1.16), pkg-config, python3:amd64, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [957 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [442 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [529 B]
Fetched 1928 B in 0s (123 kB/s)
Reading package lists...
Reading package lists...

Install main build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  dbus krb5-locales libapparmor1 libatk1.0-0 libavahi-client3
  libavahi-common-data libavahi-common3 libcups2 libdbus-1-3 libgail-common
  libgail18 libgssapi-krb5-2 libgtk2.0-0 libgtk2.0-bin libgts-0.7-5 libgts-bin
  libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libxcomposite1
  libxcursor1 libxdamage1 libxfixes3 libxi6 libxinerama1 libxrandr2
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
  libserd-0-0:armhf libserd-dev:armhf libsord-0-0:armhf libsord-dev:armhf
  lv2-dev:armhf
Suggested packages:
  serdi:armhf libserd-doc:armhf sordi:armhf libsord-doc:armhf
The following NEW packages will be installed:
  libserd-0-0:armhf libserd-dev:armhf libsord-0-0:armhf libsord-dev:armhf
  lv2-dev:armhf sbuild-build-depends-main-dummy:armhf
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
Need to get 952 B/208 kB of archives.
After this operation, 1015 kB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [952 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 952 B in 0s (0 B/s)
Selecting previously unselected package libserd-0-0:armhf.
(Reading database ... 31208 files and directories currently installed.)
Preparing to unpack .../0-libserd-0-0_0.30.2-1_armhf.deb ...
Unpacking libserd-0-0:armhf (0.30.2-1) ...
Selecting previously unselected package libserd-dev:armhf.
Preparing to unpack .../1-libserd-dev_0.30.2-1_armhf.deb ...
Unpacking libserd-dev:armhf (0.30.2-1) ...
Selecting previously unselected package libsord-0-0:armhf.
Preparing to unpack .../2-libsord-0-0_0.16.4-1_armhf.deb ...
Unpacking libsord-0-0:armhf (0.16.4-1) ...
Selecting previously unselected package libsord-dev:armhf.
Preparing to unpack .../3-libsord-dev_0.16.4-1_armhf.deb ...
Unpacking libsord-dev:armhf (0.16.4-1) ...
Selecting previously unselected package lv2-dev:armhf.
Preparing to unpack .../4-lv2-dev_1.16.0-1_armhf.deb ...
Unpacking lv2-dev:armhf (1.16.0-1) ...
Selecting previously unselected package sbuild-build-depends-main-dummy:armhf.
Preparing to unpack .../5-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Setting up lv2-dev:armhf (1.16.0-1) ...
Setting up libserd-0-0:armhf (0.30.2-1) ...
Setting up libserd-dev:armhf (0.30.2-1) ...
Setting up libsord-0-0:armhf (0.16.4-1) ...
Setting up libsord-dev:armhf (0.16.4-1) ...
Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Processing triggers for libc-bin (2.29-6) ...

+------------------------------------------------------------------------------+
| Check architectures                                                          |
+------------------------------------------------------------------------------+

Initial Foreign Architectures: armhf 
Arch check ok (armhf included in any all)

+------------------------------------------------------------------------------+
| Build environment                                                            |
+------------------------------------------------------------------------------+

Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64)
Toolchain package versions: binutils_2.33.1-6 dpkg-dev_1.19.7 g++-9_9.2.1-21 gcc-9_9.2.1-21 libc6-dev_2.29-6 libstdc++-9-dev_9.2.1-21 libstdc++-9-dev-armhf-cross_9.2.1-21cross1 libstdc++6_9.2.1-21 libstdc++6-armhf-cross_9.2.1-21cross1 linux-libc-dev_5.3.15-1
Package versions: adduser_3.118 adwaita-icon-theme_3.34.0-2 apt_1.8.4 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-10 autotools-dev_20180224.1 base-files_11 base-passwd_3.5.47 bash_5.0-5 binutils_2.33.1-6 binutils-arm-linux-gnueabihf_2.33.1-6 binutils-common_2.33.1-6 binutils-x86-64-linux-gnu_2.33.1-6 bsdmainutils_11.1.2+b1 bsdutils_1:2.34-0.1 build-essential_12.8 bzip2_1.0.8-2 ccache_3.7.6-1 coreutils_8.30-3+b1 cpp_4:9.2.1-3.1 cpp-9_9.2.1-21 cpp-9-arm-linux-gnueabihf_9.2.1-21cross1 cpp-arm-linux-gnueabihf_4:9.2.1-3.1 cross-config_2.6.15-3 crossbuild-essential-armhf_12.8 dash_0.5.10.2-6 dbus_1.12.16-2 debconf_1.5.73 debhelper_12.7.2 debian-archive-keyring_2019.1 debianutils_4.9.1 dh-autoreconf_19 dh-strip-nondeterminism_1.6.3-1 diffutils_1:3.7-3 dirmngr_2.2.17-3 dpkg_1.19.7 dpkg-cross_2.6.15-3 dpkg-dev_1.19.7 dwz_0.13-5 e2fsprogs_1.45.4-1 eatmydata_105-7 fakeroot_1.24-1 fdisk_2.34-0.1 file_1:5.37-6 findutils_4.7.0-1 fontconfig_2.13.1-2+b1 fontconfig-config_2.13.1-2 fonts-dejavu-core_2.37-1 g++_4:9.2.1-3.1 g++-9_9.2.1-21 g++-9-arm-linux-gnueabihf_9.2.1-21cross1 g++-arm-linux-gnueabihf_4:9.2.1-3.1 gcc_4:9.2.1-3.1 gcc-9_9.2.1-21 gcc-9-arm-linux-gnueabihf_9.2.1-21cross1 gcc-9-arm-linux-gnueabihf-base_9.2.1-21cross1 gcc-9-base_9.2.1-21 gcc-9-cross-base_9.2.1-21cross1 gcc-arm-linux-gnueabihf_4:9.2.1-3.1 gettext_0.19.8.1-10 gettext-base_0.19.8.1-10 gir1.2-atk-1.0_2.34.1-1 gir1.2-freedesktop_1.62.0-2 gir1.2-gdkpixbuf-2.0_2.40.0+dfsg-1 gir1.2-glib-2.0_1.62.0-2 gir1.2-gtk-2.0_2.24.32-4 gir1.2-harfbuzz-0.0_2.6.4-1 gir1.2-pango-1.0_1.42.4-7 gnupg_2.2.17-3 gnupg-l10n_2.2.17-3 gnupg-utils_2.2.17-3 gpg_2.2.17-3 gpg-agent_2.2.17-3 gpg-wks-client_2.2.17-3 gpg-wks-server_2.2.17-3 gpgconf_2.2.17-3 gpgsm_2.2.17-3 gpgv_2.2.17-3 grep_3.3-1 groff-base_1.22.4-3 gtk-update-icon-cache_3.24.13-1 gzip_1.9-3+b1 hicolor-icon-theme_0.17-2 hostname_3.23 icu-devtools_63.2-2 init-system-helpers_1.57 intltool-debian_0.35.0+20060710.5 krb5-locales_1.17-6 libacl1_2.2.53-5 libapparmor1_2.13.3-7 libapt-pkg5.0_1.8.4 libarchive-zip-perl_1.67-1 libasan5_9.2.1-21 libasan5-armhf-cross_9.2.1-21cross1 libassuan0_2.5.3-7 libatk1.0-0_2.34.1-1 libatk1.0-data_2.34.1-1 libatk1.0-dev_2.34.1-1 libatomic1_9.2.1-21 libatomic1-armhf-cross_9.2.1-21cross1 libattr1_1:2.4.48-5 libaudit-common_1:2.8.5-2 libaudit1_1:2.8.5-2+b1 libavahi-client3_0.7-5 libavahi-common-data_0.7-5 libavahi-common3_0.7-5 libbinutils_2.33.1-6 libblkid-dev_2.34-0.1 libblkid1_2.34-0.1 libbsd0_0.10.0-1 libbz2-1.0_1.0.8-2 libc-bin_2.29-6 libc-dev-bin_2.29-6 libc6_2.29-6 libc6-armhf-cross_2.29-1cross7 libc6-dev_2.29-6 libc6-dev-armhf-cross_2.29-1cross7 libcairo-gobject2_1.16.0-4 libcairo-script-interpreter2_1.16.0-4 libcairo2_1.16.0-4 libcairo2-dev_1.16.0-4 libcap-ng0_0.7.9-2.1+b1 libcc1-0_9.2.1-21 libcdt5_2.42.2-3 libcgraph6_2.42.2-3 libcom-err2_1.45.4-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000002-1 libcroco3_0.6.13-1 libcrypt1_1:4.4.10-7 libcrypt1-dev_1:4.4.10-7 libcups2_2.3.0-7 libdatrie1_0.2.12-3 libdb5.3_5.3.28+dfsg1-0.6 libdbus-1-3_1.12.16-2 libdebconfclient0_0.250 libdebhelper-perl_12.7.2 libdebian-dpkgcross-perl_2.6.15-3 libdpkg-perl_1.19.7 libeatmydata1_105-7 libelf1_0.176-1.1 libexpat1_2.2.9-1 libexpat1-dev_2.2.9-1 libext2fs2_1.45.4-1 libfakeroot_1.24-1 libfdisk1_2.34-0.1 libffi-dev_3.2.1-9 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-stripnondeterminism-perl_1.6.3-1 libfile-which-perl_1.23-1 libfontconfig1_2.13.1-2+b1 libfontconfig1-dev_2.13.1-2+b1 libfreetype-dev_2.10.1-2 libfreetype6_2.10.1-2 libfreetype6-dev_2.10.1-2 libfribidi-dev_1.0.8-2 libfribidi0_1.0.8-2 libgail-common_2.24.32-4 libgail18_2.24.32-4 libgcc-9-dev_9.2.1-21 libgcc-9-dev-armhf-cross_9.2.1-21cross1 libgcc1_1:9.2.1-21 libgcc1-armhf-cross_1:9.2.1-21cross1 libgcrypt20_1.8.5-3 libgd3_2.2.5-5.2 libgdbm-compat4_1.18.1-5 libgdbm6_1.18.1-5 libgdk-pixbuf2.0-0_2.40.0+dfsg-1 libgdk-pixbuf2.0-bin_2.40.0+dfsg-1 libgdk-pixbuf2.0-common_2.40.0+dfsg-1 libgdk-pixbuf2.0-dev_2.40.0+dfsg-1 libgirepository-1.0-1_1.62.0-2 libglib2.0-0_2.62.3-2 libglib2.0-bin_2.62.3-2 libglib2.0-data_2.62.3-2 libglib2.0-dev_2.62.3-2 libglib2.0-dev-bin_2.62.3-2 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.11.1-2 libgomp1_9.2.1-21 libgomp1-armhf-cross_9.2.1-21cross1 libgpg-error0_1.36-7 libgraphite2-3_1.3.13-11 libgraphite2-dev_1.3.13-11 libgssapi-krb5-2_1.17-6 libgtk2.0-0_2.24.32-4 libgtk2.0-bin_2.24.32-4 libgtk2.0-common_2.24.32-4 libgtk2.0-dev_2.24.32-4 libgts-0.7-5_0.7.6+darcs121130-4+b1 libgts-bin_0.7.6+darcs121130-4+b1 libgvpr2_2.42.2-3 libharfbuzz-dev_2.6.4-1 libharfbuzz-gobject0_2.6.4-1 libharfbuzz-icu0_2.6.4-1 libharfbuzz0b_2.6.4-1 libhogweed5_3.5.1+really3.5.1-2 libice-dev_2:1.0.9-2 libice6_2:1.0.9-2 libicu-dev_63.2-2 libicu63_63.2-2 libidn2-0_2.2.0-2 libio-string-perl_1.08-3 libisl21_0.21-2 libisl22_0.22-2 libitm1_9.2.1-21 libjbig0_2.1-3.1+b2 libjpeg62-turbo_1:1.5.2-2+b1 libjpeg62-turbo-dev_1:1.5.2-2+b1 libk5crypto3_1.17-6 libkeyutils1_1.6-6 libkrb5-3_1.17-6 libkrb5support0_1.17-6 libksba8_1.3.5-2 liblab-gamut1_2.42.2-3 libldap-2.4-2_2.4.48+dfsg-1+b2 libldap-common_2.4.48+dfsg-1 liblocale-gettext-perl_1.07-4 liblsan0_9.2.1-21 libltdl7_2.4.6-11 liblz4-1_1.9.2-2 liblzma5_5.2.4-1+b1 liblzo2-2_2.10-0.1 libmagic-mgc_1:5.37-6 libmagic1_1:5.37-6 libmount-dev_2.34-0.1 libmount1_2.34-0.1 libmpc3_1.1.0-1 libmpdec2_2.4.2-2 libmpfr6_4.0.2-1 libncursesw6_6.1+20191019-1 libnettle7_3.5.1+really3.5.1-2 libnpth0_1.6-1 libp11-kit0_0.23.18.1-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpango-1.0-0_1.42.4-7 libpango1.0-dev_1.42.4-7 libpangocairo-1.0-0_1.42.4-7 libpangoft2-1.0-0_1.42.4-7 libpangoxft-1.0-0_1.42.4-7 libpathplan4_2.42.2-3 libpcre16-3_2:8.39-12+b1 libpcre2-16-0_10.34-7 libpcre2-32-0_10.34-7 libpcre2-8-0_10.34-7 libpcre2-dev_10.34-7 libpcre2-posix2_10.34-7 libpcre3_2:8.39-12+b1 libpcre3-dev_2:8.39-12+b1 libpcre32-3_2:8.39-12+b1 libpcrecpp0v5_2:8.39-12+b1 libperl5.30_5.30.0-9 libpipeline1_1.5.1-3 libpixman-1-0_0.36.0-1 libpixman-1-dev_0.36.0-1 libpng-dev_1.6.37-1 libpng16-16_1.6.37-1 libpthread-stubs0-dev_0.4-1 libpython3-stdlib_3.7.5-3 libpython3.7-minimal_3.7.6-1 libpython3.7-stdlib_3.7.6-1 libquadmath0_9.2.1-21 libreadline8_8.0-3 librsvg2-2_2.46.4-1 librsvg2-common_2.46.4-1 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.4.2-2 libselinux1_3.0-1 libselinux1-dev_3.0-1 libsemanage-common_3.0-1 libsemanage1_3.0-1 libsepol1_3.0-1 libsepol1-dev_3.0-1 libserd-0-0_0.30.2-1 libserd-dev_0.30.2-1 libsigsegv2_2.12-2 libsm-dev_2:1.2.3-1 libsm6_2:1.2.3-1 libsmartcols1_2.34-0.1 libsord-0-0_0.16.4-1 libsord-dev_0.16.4-1 libsqlite3-0_3.30.1-1 libss2_1.45.4-1 libssl1.1_1.1.1d-2 libstdc++-9-dev_9.2.1-21 libstdc++-9-dev-armhf-cross_9.2.1-21cross1 libstdc++6_9.2.1-21 libstdc++6-armhf-cross_9.2.1-21cross1 libsub-override-perl_0.09-2 libsystemd0_244-3 libtasn1-6_4.15.0-2 libthai-data_0.1.28-3 libthai0_0.1.28-3 libtiff5_4.1.0+git191117-1 libtinfo6_6.1+20191019-1 libtool_2.4.6-11 libtsan0_9.2.1-21 libubsan1_9.2.1-21 libubsan1-armhf-cross_9.2.1-21cross1 libuchardet0_0.0.6-3 libudev1_244-3 libunistring2_0.9.10-2 libuuid1_2.34-0.1 libwebp6_0.6.1-2+b1 libx11-6_2:1.6.8-1 libx11-data_2:1.6.8-1 libx11-dev_2:1.6.8-1 libxau-dev_1:1.0.8-1+b2 libxau6_1:1.0.8-1+b2 libxcb-render0_1.13.1-2 libxcb-render0-dev_1.13.1-2 libxcb-shm0_1.13.1-2 libxcb-shm0-dev_1.13.1-2 libxcb1_1.13.1-2 libxcb1-dev_1.13.1-2 libxcomposite-dev_1:0.4.4-2 libxcomposite1_1:0.4.4-2 libxcursor-dev_1:1.2.0-2 libxcursor1_1:1.2.0-2 libxdamage-dev_1:1.1.5-1 libxdamage1_1:1.1.5-1 libxdmcp-dev_1:1.1.2-3 libxdmcp6_1:1.1.2-3 libxdot4_2.42.2-3 libxext-dev_2:1.3.3-1+b2 libxext6_2:1.3.3-1+b2 libxfixes-dev_1:5.0.3-1 libxfixes3_1:5.0.3-1 libxft-dev_2.3.2-2 libxft2_2.3.2-2 libxi-dev_2:1.7.9-1 libxi6_2:1.7.9-1 libxinerama-dev_2:1.1.4-2 libxinerama1_2:1.1.4-2 libxml-libxml-perl_2.0134+dfsg-1+b1 libxml-namespacesupport-perl_1.12-1 libxml-sax-base-perl_1.09-1 libxml-sax-perl_1.02+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-8 libxml2-dev_2.9.4+dfsg1-8 libxml2-utils_2.9.4+dfsg1-8 libxpm4_1:3.5.12-1 libxrandr-dev_2:1.5.1-1 libxrandr2_2:1.5.1-1 libxrender-dev_1:0.9.10-1 libxrender1_1:0.9.10-1 libyaml-perl_1.29-1 libzstd1_1.4.4+dfsg-1 linux-libc-dev_5.3.15-1 linux-libc-dev-armhf-cross_5.2.9-2cross7 login_1:4.8-1 logsave_1.45.4-1 lsb-base_11.1.0 lv2-dev_1.16.0-1 m4_1.4.18-4 make_4.2.1-1.2 man-db_2.9.0-2 mawk_1.3.3-17+b3 mime-support_3.64 mount_2.34-0.1 ncurses-base_6.1+20191019-1 ncurses-bin_6.1+20191019-1 pango1.0-tools_1.42.4-7 passwd_1:4.8-1 patch_2.7.6-6 perl_5.30.0-9 perl-base_5.30.0-9 perl-modules-5.30_5.30.0-9 pinentry-curses_1.1.0-3+b1 pkg-config_0.29-6 po-debconf_1.0.21 python3_3.7.5-3 python3-distutils_3.8.0-1 python3-lib2to3_3.8.0-1 python3-minimal_3.7.5-3 python3.7_3.7.6-1 python3.7-minimal_3.7.6-1 readline-common_8.0-3 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12+nmu1 shared-mime-info_1.10-1 sysvinit-utils_2.96-1 tar_1.30+dfsg-6+b1 tzdata_2019c-3 ucf_3.0038+nmu1 util-linux_2.34-0.1 uuid-dev_2.34-0.1 x11-common_1:7.7+20 x11proto-composite-dev_1:2018.4-4 x11proto-core-dev_2018.4-4 x11proto-damage-dev_1:2018.4-4 x11proto-dev_2018.4-4 x11proto-fixes-dev_1:2018.4-4 x11proto-input-dev_2018.4-4 x11proto-randr-dev_2018.4-4 x11proto-xext-dev_2018.4-4 x11proto-xinerama-dev_2018.4-4 xorg-sgml-doctools_1:1.11-1 xtrans-dev_1.3.5-1 xz-utils_5.2.4-1+b1 zlib1g_1:1.2.11.dfsg-1+b1 zlib1g-dev_1:1.2.11.dfsg-1+b1

+------------------------------------------------------------------------------+
| Build                                                                        |
+------------------------------------------------------------------------------+


Unpack source
-------------

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 3.0 (quilt)
Source: sratom
Binary: libsratom-dev, libsratom-0-0, libsratom-doc
Architecture: any all
Version: 0.6.4-1
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Uploaders:  Alessio Treglia <alessio@debian.org>, Jaromír Mikeš <mira.mikes@seznam.cz>
Homepage: http://drobilla.net/software/sratom/
Standards-Version: 4.4.1
Vcs-Browser: https://salsa.debian.org/multimedia-team/sratom
Vcs-Git: https://salsa.debian.org/multimedia-team/sratom.git
Build-Depends: debhelper-compat (= 12), libserd-dev (>= 0.30), libsord-dev (>= 0.14), lv2-dev (>= 1.16), pkg-config, python3:native
Build-Depends-Indep: doxygen, graphviz
Package-List:
 libsratom-0-0 deb libs optional arch=any
 libsratom-dev deb libdevel optional arch=any
 libsratom-doc deb doc optional arch=all
Checksums-Sha1:
 37e7fc03e46f2a90e2585cf913a429607c7c565d 339707 sratom_0.6.4.orig.tar.bz2
 a1d258d6cab1d9c18beb534a53e4d5cec701356f 4420 sratom_0.6.4-1.debian.tar.xz
Checksums-Sha256:
 146c8f14b8902ac3c8fa8c2e0a014eb8a38fab60090c5adbfbff3e3b7c5c006e 339707 sratom_0.6.4.orig.tar.bz2
 7c2aa9b8abc9ceb6343f86143526e6e405dc198f64e11a8196cdbbadc42833f7 4420 sratom_0.6.4-1.debian.tar.xz
Files:
 0d087aa05c7b22d569aacc2fd14f0274 339707 sratom_0.6.4.orig.tar.bz2
 bc2240d4d3924d0b14755b1138bada47 4420 sratom_0.6.4-1.debian.tar.xz

-----BEGIN PGP SIGNATURE-----
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=acO+
-----END PGP SIGNATURE-----

gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error
gpgv: Signature made Sun Dec  8 20:43:38 2019 UTC
gpgv:                using RSA key F78CBA07817BB149A11D339069F2FC516EA71993
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./sratom_0.6.4-1.dsc
dpkg-source: info: extracting sratom in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking sratom_0.6.4.orig.tar.bz2
dpkg-source: info: unpacking sratom_0.6.4-1.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 1001-dont_run_ldconfig.patch

Check disk space
----------------

Sufficient free space for build

User Environment
----------------

APT_CONFIG=/var/lib/sbuild/apt.conf
CCACHE_COMPRESS=1
CCACHE_DIR=/var/cache/ccache-sbuild
CCACHE_UMASK=002
CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf
DEB_BUILD_OPTIONS=nocheck
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LD_LIBRARY_PATH=/usr/lib/libeatmydata
LD_PRELOAD=libeatmydata.so
LOGNAME=build
PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/<<PKGBUILDDIR>>
SCHROOT_ALIAS_NAME=unstable-amd64-sbuild
SCHROOT_CHROOT_NAME=unstable-amd64-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=1000
SCHROOT_GROUP=build
SCHROOT_SESSION_ID=unstable-amd64-sbuild-cf6a4a78-6c32-47c8-be81-d35fb56b116f
SCHROOT_UID=1000
SCHROOT_USER=build
SHELL=/bin/sh
USER=build

dpkg-buildpackage
-----------------

Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16
dpkg-buildpackage: info: source package sratom
dpkg-buildpackage: info: source version 0.6.4-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Sebastian Ramacher <sramacher@debian.org>
dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
 dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
 debian/rules clean
dh clean
   debian/rules override_dh_auto_clean
make[1]: Entering directory '/<<PKGBUILDDIR>>'
python3 ./waf clean || true
The project was not configured: run "waf configure" first!
find -name "*.pyc" -delete
rm -rf build .waf*
dh_auto_clean
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_clean
 debian/rules binary-arch
dh binary-arch
   dh_update_autotools_config -a
   dh_autoreconf -a
   debian/rules override_dh_auto_configure
make[1]: Entering directory '/<<PKGBUILDDIR>>'
CC=arm-linux-gnueabihf-gcc PKGCONFIG=arm-linux-gnueabihf-pkg-config \
python3 ./waf configure \
	--prefix=/usr \
	--mandir=/usr/share/man \
	--libdir=/usr/lib/arm-linux-gnueabihf \
	--strict \
	
Setting top to                                : /<<PKGBUILDDIR>> 
Setting out to                                : /<<PKGBUILDDIR>>/build 
Checking for 'gcc' (C compiler)               : arm-linux-gnueabihf-gcc 
Checking for extra C warning flags            : yes 
Checking for library gcov                     : yes 
Checking for flag '-std=c99'                  : yes 
Checking for program 'pkg-config'             : arm-linux-gnueabihf-pkg-config 
Checking for 'lv2 >= 1.16.0'                  : yes 
Checking for 'serd-0 >= 0.30.0'               : yes 
Checking for 'sord-0 >= 0.14.0'               : yes 
Install prefix                                : /usr 
C Flags                                       : -I/<<PKGBUILDDIR>> -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -DNDEBUG -pedantic -Wshadow -Wall -Wcast-align -Wextra -Wmissing-declarations -Wno-unused-parameter -Wno-parentheses -Wstrict-overflow -Wundef -Wwrite-strings -fstrict-overflow -Wlogical-op -Wsuggest-attribute=noreturn -Wunsafe-loop-optimizations -fshow-column -std=c99 
Debuggable                                    : no 
Build documentation                           : no 
Unit tests                                    : no 
'configure' finished successfully (0.498s)
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   debian/rules override_dh_auto_build
make[1]: Entering directory '/<<PKGBUILDDIR>>'
python3 ./waf
Waf: Entering directory `/<<PKGBUILDDIR>>/build'
[1/4] Compiling src/sratom.c
[2/4] Compiling sratom.pc.in
../src/sratom.c: In function ‘sratom_forge_deref’:
../src/sratom.c:805:9: warning: cast increases required alignment of target type [-Wcast-align]
  805 |  return (LV2_Atom*)(chunk->buf + ref - 1);
      |         ^
../src/sratom.c: In function ‘sratom_from_turtle’:
../src/sratom.c:850:9: warning: cast increases required alignment of target type [-Wcast-align]
  850 |  return (LV2_Atom*)out.buf;
      |         ^

[3/4] Linking build/libsratom-0.so
[4/4] Symlinking build/libsratom-0.so
Waf: Leaving directory `/<<PKGBUILDDIR>>/build'
Build commands will be stored in build/compile_commands.json
'build' finished successfully (1.169s)
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   create-stamp debian/debhelper-build-stamp
   dh_testroot -a
   dh_prep -a
   debian/rules override_dh_auto_install
make[1]: Entering directory '/<<PKGBUILDDIR>>'
python3 ./waf install --destdir=/<<PKGBUILDDIR>>/debian/tmp
Waf: Entering directory `/<<PKGBUILDDIR>>/build'
+ install /<<PKGBUILDDIR>>/debian/tmp/usr/include/sratom-0/sratom/sratom.h (from sratom/sratom.h)
+ install /<<PKGBUILDDIR>>/debian/tmp/usr/lib/arm-linux-gnueabihf/pkgconfig/sratom-0.pc (from build/sratom-0.pc)
+ install /<<PKGBUILDDIR>>/debian/tmp/usr/lib/arm-linux-gnueabihf/libsratom-0.so.0.6.4 (from build/libsratom-0.so)
+ symlink /<<PKGBUILDDIR>>/debian/tmp/usr/lib/arm-linux-gnueabihf/libsratom-0.so.0 (to libsratom-0.so.0.6.4)
+ symlink /<<PKGBUILDDIR>>/debian/tmp/usr/lib/arm-linux-gnueabihf/libsratom-0.so (to libsratom-0.so.0.6.4)
Waf: Leaving directory `/<<PKGBUILDDIR>>/build'
Build commands will be stored in build/compile_commands.json
'install' finished successfully (0.034s)
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_install -a
   dh_installdocs -a
   debian/rules override_dh_installchangelogs
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_installchangelogs NEWS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_perl -a
   dh_link -a
   dh_strip_nondeterminism -a
   dh_compress -a
   dh_fixperms -a
   dh_missing -a
   dh_dwz -a
   dh_strip -a
   dh_makeshlibs -a
   dh_shlibdeps -a
   dh_installdeb -a
   dh_gencontrol -a
   dh_md5sums -a
   dh_builddeb -a
dpkg-deb: building package 'libsratom-0-0' in '../libsratom-0-0_0.6.4-1_armhf.deb'.
dpkg-deb: building package 'libsratom-dev' in '../libsratom-dev_0.6.4-1_armhf.deb'.
dpkg-deb: building package 'libsratom-0-0-dbgsym' in '../libsratom-0-0-dbgsym_0.6.4-1_armhf.deb'.
 dpkg-genbuildinfo --build=any
 dpkg-genchanges --build=any >../sratom_0.6.4-1_armhf.changes
dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included)
 dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2019-12-21T12:56:36Z

Finished
--------

I: Built successfully

+------------------------------------------------------------------------------+
| Changes                                                                      |
+------------------------------------------------------------------------------+


sratom_0.6.4-1_armhf.changes:
-----------------------------

Format: 1.8
Date: Sun, 08 Dec 2019 21:41:55 +0100
Source: sratom
Binary: libsratom-0-0 libsratom-0-0-dbgsym libsratom-dev
Built-For-Profiles: cross nocheck
Architecture: armhf
Version: 0.6.4-1
Distribution: unstable-amd64-sbuild
Urgency: medium
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Changed-By: Sebastian Ramacher <sramacher@debian.org>
Description:
 libsratom-0-0 - library for serialising LV2 atoms to/from Turtle
 libsratom-dev - library for serialising LV2 atoms to/from Turtle - development fi
Closes: 929088 943235
Changes:
 sratom (0.6.4-1) unstable; urgency=medium
 .
   [ Ondřej Nový ]
   * Team upload.
   * d/copyright: Use https protocol in Format field
   * d/control: Set Vcs-* to salsa.debian.org
 .
   [ Felipe Sateler ]
   * Change maintainer address to debian-multimedia@lists.debian.org
 .
   [ Ondřej Nový ]
   * Use debhelper-compat instead of debian/compat
 .
   [ Helmut Grohne ]
   * Fix FTCBFS: (Closes: #929088)
     + Annotate Build-Depends: python with :native.
     + Pass cross tools to waf.
 .
   [ Sebastian Ramacher ]
   * New upstream release
   * debian/:
     - Use python3 to run waf (Closes: #943235)
     - Bump debhelper compat to 12
   * debian/rules: Remove get-orig-source
   * debian/control:
     - Bump Standards-Version
     - Remove obsolete Pre-Depends
     - Set RRR: no
     - Bump build dependencies
Checksums-Sha1:
 dd9891b2f2f82be41e37de7f78c1383a73ab9113 58420 libsratom-0-0-dbgsym_0.6.4-1_armhf.deb
 5d56debefe0db1556f258b4dccf1582212db127d 15956 libsratom-0-0_0.6.4-1_armhf.deb
 53656e4c9e416c391ef864d0413a2030966f277e 6804 libsratom-dev_0.6.4-1_armhf.deb
 60c0f1d43e613f5fa37d2b621a5adefbf5fbd88f 5458 sratom_0.6.4-1_armhf.buildinfo
Checksums-Sha256:
 910b82d85354171c1dbaef2961b53a5b9d3adce3772e069db02652976bc60c6a 58420 libsratom-0-0-dbgsym_0.6.4-1_armhf.deb
 2331d14e7b6d90e4db4f2f740c129f43e2deb76f1ce89cbbf3e6eec737ab7e1f 15956 libsratom-0-0_0.6.4-1_armhf.deb
 d106f5574a3947adb3676bf20bc9f47fed47937092c08c1c0e4365e22eacf2e5 6804 libsratom-dev_0.6.4-1_armhf.deb
 76c550dcaae89b5b8f2ae8c5e806e92b11b12fc5e42e33c805b6f4d5ca629f1d 5458 sratom_0.6.4-1_armhf.buildinfo
Files:
 acf11b179ff7b3c516d89d06741660d4 58420 debug optional libsratom-0-0-dbgsym_0.6.4-1_armhf.deb
 5bd086055ab12982548409c10789fae5 15956 libs optional libsratom-0-0_0.6.4-1_armhf.deb
 c359cf34b0a64018a9583f7402b55f46 6804 libdevel optional libsratom-dev_0.6.4-1_armhf.deb
 5c270966601d6ed7f960403d492faee0 5458 libs optional sratom_0.6.4-1_armhf.buildinfo

+------------------------------------------------------------------------------+
| Buildinfo                                                                    |
+------------------------------------------------------------------------------+

Format: 1.0
Source: sratom
Binary: libsratom-dev libsratom-0-0 libsratom-doc
Architecture: armhf
Version: 0.6.4-1
Checksums-Md5:
 acf11b179ff7b3c516d89d06741660d4 58420 libsratom-0-0-dbgsym_0.6.4-1_armhf.deb
 5bd086055ab12982548409c10789fae5 15956 libsratom-0-0_0.6.4-1_armhf.deb
 c359cf34b0a64018a9583f7402b55f46 6804 libsratom-dev_0.6.4-1_armhf.deb
Checksums-Sha1:
 dd9891b2f2f82be41e37de7f78c1383a73ab9113 58420 libsratom-0-0-dbgsym_0.6.4-1_armhf.deb
 5d56debefe0db1556f258b4dccf1582212db127d 15956 libsratom-0-0_0.6.4-1_armhf.deb
 53656e4c9e416c391ef864d0413a2030966f277e 6804 libsratom-dev_0.6.4-1_armhf.deb
Checksums-Sha256:
 910b82d85354171c1dbaef2961b53a5b9d3adce3772e069db02652976bc60c6a 58420 libsratom-0-0-dbgsym_0.6.4-1_armhf.deb
 2331d14e7b6d90e4db4f2f740c129f43e2deb76f1ce89cbbf3e6eec737ab7e1f 15956 libsratom-0-0_0.6.4-1_armhf.deb
 d106f5574a3947adb3676bf20bc9f47fed47937092c08c1c0e4365e22eacf2e5 6804 libsratom-dev_0.6.4-1_armhf.deb
Build-Origin: Debian
Build-Architecture: amd64
Build-Date: Sat, 21 Dec 2019 12:56:35 +0000
Build-Path: /<<PKGBUILDDIR>>
Installed-Build-Depends:
 autoconf (= 2.69-11),
 automake (= 1:1.16.1-4),
 autopoint (= 0.19.8.1-10),
 autotools-dev (= 20180224.1),
 base-files (= 11),
 base-passwd (= 3.5.47),
 bash (= 5.0-5),
 binutils (= 2.33.1-6),
 binutils-common (= 2.33.1-6),
 binutils-x86-64-linux-gnu (= 2.33.1-6),
 bsdmainutils (= 11.1.2+b1),
 bsdutils (= 1:2.34-0.1),
 build-essential (= 12.8),
 bzip2 (= 1.0.8-2),
 coreutils (= 8.30-3+b1),
 cpp (= 4:9.2.1-3.1),
 cpp-9 (= 9.2.1-21),
 dash (= 0.5.10.2-6),
 debconf (= 1.5.73),
 debhelper (= 12.7.2),
 debianutils (= 4.9.1),
 dh-autoreconf (= 19),
 dh-strip-nondeterminism (= 1.6.3-1),
 diffutils (= 1:3.7-3),
 dpkg (= 1.19.7),
 dpkg-dev (= 1.19.7),
 dwz (= 0.13-5),
 fdisk (= 2.34-0.1),
 file (= 1:5.37-6),
 findutils (= 4.7.0-1),
 g++ (= 4:9.2.1-3.1),
 g++-9 (= 9.2.1-21),
 gcc (= 4:9.2.1-3.1),
 gcc-9 (= 9.2.1-21),
 gcc-9-base (= 9.2.1-21),
 gettext (= 0.19.8.1-10),
 gettext-base (= 0.19.8.1-10),
 grep (= 3.3-1),
 groff-base (= 1.22.4-3),
 gzip (= 1.9-3+b1),
 hostname (= 3.23),
 init-system-helpers (= 1.57),
 intltool-debian (= 0.35.0+20060710.5),
 libacl1 (= 2.2.53-5),
 libarchive-zip-perl (= 1.67-1),
 libasan5 (= 9.2.1-21),
 libatomic1 (= 9.2.1-21),
 libattr1 (= 1:2.4.48-5),
 libaudit-common (= 1:2.8.5-2),
 libaudit1 (= 1:2.8.5-2+b1),
 libbinutils (= 2.33.1-6),
 libblkid1 (= 2.34-0.1),
 libbsd0 (= 0.10.0-1),
 libbz2-1.0 (= 1.0.8-2),
 libc-bin (= 2.29-6),
 libc-dev-bin (= 2.29-6),
 libc6 (= 2.29-6),
 libc6-dev (= 2.29-6),
 libcap-ng0 (= 0.7.9-2.1+b1),
 libcc1-0 (= 9.2.1-21),
 libcroco3 (= 0.6.13-1),
 libcrypt1 (= 1:4.4.10-7),
 libcrypt1-dev (= 1:4.4.10-7),
 libdb5.3 (= 5.3.28+dfsg1-0.6),
 libdebconfclient0 (= 0.250),
 libdebhelper-perl (= 12.7.2),
 libdpkg-perl (= 1.19.7),
 libelf1 (= 0.176-1.1),
 libexpat1 (= 2.2.9-1),
 libfdisk1 (= 2.34-0.1),
 libffi6 (= 3.2.1-9),
 libfile-stripnondeterminism-perl (= 1.6.3-1),
 libgcc-9-dev (= 9.2.1-21),
 libgcc1 (= 1:9.2.1-21),
 libgcrypt20 (= 1.8.5-3),
 libgdbm-compat4 (= 1.18.1-5),
 libgdbm6 (= 1.18.1-5),
 libglib2.0-0 (= 2.62.3-2),
 libgmp10 (= 2:6.1.2+dfsg-4),
 libgomp1 (= 9.2.1-21),
 libgpg-error0 (= 1.36-7),
 libicu63 (= 63.2-2),
 libisl22 (= 0.22-2),
 libitm1 (= 9.2.1-21),
 liblsan0 (= 9.2.1-21),
 liblz4-1 (= 1.9.2-2),
 liblzma5 (= 5.2.4-1+b1),
 libmagic-mgc (= 1:5.37-6),
 libmagic1 (= 1:5.37-6),
 libmount1 (= 2.34-0.1),
 libmpc3 (= 1.1.0-1),
 libmpdec2 (= 2.4.2-2),
 libmpfr6 (= 4.0.2-1),
 libncursesw6 (= 6.1+20191019-1),
 libpam-modules (= 1.3.1-5),
 libpam-modules-bin (= 1.3.1-5),
 libpam-runtime (= 1.3.1-5),
 libpam0g (= 1.3.1-5),
 libpcre2-8-0 (= 10.34-7),
 libpcre3 (= 2:8.39-12+b1),
 libperl5.30 (= 5.30.0-9),
 libpipeline1 (= 1.5.1-3),
 libpython3-stdlib (= 3.7.5-3),
 libpython3.7-minimal (= 3.7.6-1),
 libpython3.7-stdlib (= 3.7.6-1),
 libquadmath0 (= 9.2.1-21),
 libreadline8 (= 8.0-3),
 libseccomp2 (= 2.4.2-2),
 libselinux1 (= 3.0-1),
 libserd-0-0 (= 0.30.2-1),
 libserd-dev (= 0.30.2-1),
 libsigsegv2 (= 2.12-2),
 libsmartcols1 (= 2.34-0.1),
 libsord-0-0 (= 0.16.4-1),
 libsord-dev (= 0.16.4-1),
 libsqlite3-0 (= 3.30.1-1),
 libssl1.1 (= 1.1.1d-2),
 libstdc++-9-dev (= 9.2.1-21),
 libstdc++6 (= 9.2.1-21),
 libsub-override-perl (= 0.09-2),
 libsystemd0 (= 244-3),
 libtinfo6 (= 6.1+20191019-1),
 libtool (= 2.4.6-11),
 libtsan0 (= 9.2.1-21),
 libubsan1 (= 9.2.1-21),
 libuchardet0 (= 0.0.6-3),
 libudev1 (= 244-3),
 libunistring2 (= 0.9.10-2),
 libuuid1 (= 2.34-0.1),
 libxml2 (= 2.9.4+dfsg1-8),
 linux-libc-dev (= 5.3.15-1),
 login (= 1:4.8-1),
 lsb-base (= 11.1.0),
 lv2-dev (= 1.16.0-1),
 m4 (= 1.4.18-4),
 make (= 4.2.1-1.2),
 man-db (= 2.9.0-2),
 mawk (= 1.3.3-17+b3),
 mime-support (= 3.64),
 ncurses-base (= 6.1+20191019-1),
 ncurses-bin (= 6.1+20191019-1),
 patch (= 2.7.6-6),
 perl (= 5.30.0-9),
 perl-base (= 5.30.0-9),
 perl-modules-5.30 (= 5.30.0-9),
 pkg-config (= 0.29-6),
 po-debconf (= 1.0.21),
 python3 (= 3.7.5-3),
 python3-minimal (= 3.7.5-3),
 python3.7 (= 3.7.6-1),
 python3.7-minimal (= 3.7.6-1),
 readline-common (= 8.0-3),
 sed (= 4.7-1),
 sensible-utils (= 0.0.12+nmu1),
 sysvinit-utils (= 2.96-1),
 tar (= 1.30+dfsg-6+b1),
 util-linux (= 2.34-0.1),
 xz-utils (= 5.2.4-1+b1),
 zlib1g (= 1:1.2.11.dfsg-1+b1)
Environment:
 DEB_BUILD_OPTIONS="nocheck parallel=16"
 DEB_BUILD_PROFILES="cross nocheck"
 LANG="en_US.UTF-8"
 LC_ALL="C.UTF-8"
 LD_LIBRARY_PATH="/usr/lib/libeatmydata"
 MAKEFLAGS=" -j16"
 SOURCE_DATE_EPOCH="1575837715"


+------------------------------------------------------------------------------+
| Package contents                                                             |
+------------------------------------------------------------------------------+


libsratom-0-0-dbgsym_0.6.4-1_armhf.deb
--------------------------------------

 new Debian package, version 2.0.
 size 58420 bytes: control archive=540 bytes.
     397 bytes,    13 lines      control              
     106 bytes,     1 lines      md5sums              
 Package: libsratom-0-0-dbgsym
 Source: sratom
 Version: 0.6.4-1
 Auto-Built-Package: debug-symbols
 Architecture: armhf
 Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
 Installed-Size: 71
 Depends: libsratom-0-0 (= 0.6.4-1)
 Section: debug
 Priority: optional
 Multi-Arch: same
 Description: debug symbols for libsratom-0-0
 Build-Ids: 863eecf4d2a6c63f1ccf6e8319bc6266de543c5c

drwxr-xr-x root/root         0 2019-12-08 20:41 ./
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/debug/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/debug/.build-id/86/
-rw-r--r-- root/root     62292 2019-12-08 20:41 ./usr/lib/debug/.build-id/86/3eecf4d2a6c63f1ccf6e8319bc6266de543c5c.debug
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/share/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/share/doc/
lrwxrwxrwx root/root         0 2019-12-08 20:41 ./usr/share/doc/libsratom-0-0-dbgsym -> libsratom-0-0


libsratom-0-0_0.6.4-1_armhf.deb
-------------------------------

 new Debian package, version 2.0.
 size 15956 bytes: control archive=1188 bytes.
     933 bytes,    20 lines      control              
     312 bytes,     4 lines      md5sums              
      39 bytes,     1 lines      shlibs               
     457 bytes,    13 lines      symbols              
      67 bytes,     2 lines      triggers             
 Package: libsratom-0-0
 Source: sratom
 Version: 0.6.4-1
 Architecture: armhf
 Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
 Installed-Size: 44
 Depends: libc6 (>= 2.7), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.12.0~dfsg0)
 Section: libs
 Priority: optional
 Multi-Arch: same
 Homepage: http://drobilla.net/software/sratom/
 Description: library for serialising LV2 atoms to/from Turtle
  Sratom is a new C library for serialising LV2 atoms to/from Turtle.
  It is intended to be a full serialisation solution for LV2 atoms,
  allowing implementations to serialise binary atoms to strings and
  read them back again. This is particularly useful for saving plugin
  state, or implementing plugin control with network transparency.
  Sratom uses Serd and Sord to do the work, it is a small library
  implemented in a single source file, suitable for direct inclusion
  in projects if avoiding a dependency is desired.

drwxr-xr-x root/root         0 2019-12-08 20:41 ./
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/arm-linux-gnueabihf/
lrwxrwxrwx root/root         0 2019-12-08 20:41 ./usr/lib/arm-linux-gnueabihf/libsratom-0.so.0 -> libsratom-0.so.0.6.4
-rw-r--r-- root/root     25864 2019-12-08 20:41 ./usr/lib/arm-linux-gnueabihf/libsratom-0.so.0.6.4
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/share/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/share/doc/libsratom-0-0/
-rw-r--r-- root/root      1159 2019-12-08 20:41 ./usr/share/doc/libsratom-0-0/changelog.Debian.gz
-rw-r--r-- root/root       843 2019-11-10 21:22 ./usr/share/doc/libsratom-0-0/changelog.gz
-rw-r--r-- root/root      2645 2019-12-08 20:32 ./usr/share/doc/libsratom-0-0/copyright


libsratom-dev_0.6.4-1_armhf.deb
-------------------------------

 new Debian package, version 2.0.
 size 6804 bytes: control archive=1052 bytes.
    1085 bytes,    24 lines      control              
     384 bytes,     5 lines      md5sums              
 Package: libsratom-dev
 Source: sratom
 Version: 0.6.4-1
 Architecture: armhf
 Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
 Installed-Size: 26
 Depends: libserd-dev (>= 0.18.0~), libsord-dev (>= 0.12.0~dfsg0), libsratom-0-0 (= 0.6.4-1), lv2-dev
 Recommends: pkg-config
 Suggests: libsratom-doc
 Section: libdevel
 Priority: optional
 Multi-Arch: same
 Homepage: http://drobilla.net/software/sratom/
 Description: library for serialising LV2 atoms to/from Turtle - development files
  Sratom is a new C library for serialising LV2 atoms to/from Turtle.
  It is intended to be a full serialisation solution for LV2 atoms,
  allowing implementations to serialise binary atoms to strings and
  read them back again. This is particularly useful for saving plugin
  state, or implementing plugin control with network transparency.
  Sratom uses Serd and Sord to do the work, it is a small library
  implemented in a single source file, suitable for direct inclusion
  in projects if avoiding a dependency is desired.
  .
  This package provides the development files for Sratom.

drwxr-xr-x root/root         0 2019-12-08 20:41 ./
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/include/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/include/sratom-0/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/include/sratom-0/sratom/
-rw-r--r-- root/root      6098 2019-10-20 23:18 ./usr/include/sratom-0/sratom/sratom.h
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/arm-linux-gnueabihf/
lrwxrwxrwx root/root         0 2019-12-08 20:41 ./usr/lib/arm-linux-gnueabihf/libsratom-0.so -> libsratom-0.so.0.6.4
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/lib/arm-linux-gnueabihf/pkgconfig/
-rw-r--r-- root/root       276 2019-12-08 20:41 ./usr/lib/arm-linux-gnueabihf/pkgconfig/sratom-0.pc
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/share/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-12-08 20:41 ./usr/share/doc/libsratom-dev/
-rw-r--r-- root/root      1159 2019-12-08 20:41 ./usr/share/doc/libsratom-dev/changelog.Debian.gz
-rw-r--r-- root/root       843 2019-11-10 21:22 ./usr/share/doc/libsratom-dev/changelog.gz
-rw-r--r-- root/root      2645 2019-12-08 20:32 ./usr/share/doc/libsratom-dev/copyright


lintian
-------


Setup apt archive
-----------------

Merged Build-Depends: lintian:amd64
Filtered Build-Depends: lintian:amd64
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [963 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [571 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [657 B]
Fetched 2191 B in 0s (172 kB/s)
Reading package lists...
Reading package lists...

Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  dbus krb5-locales libapparmor1 libatk1.0-0 libavahi-client3
  libavahi-common-data libavahi-common3 libcups2 libdbus-1-3 libgail-common
  libgail18 libgssapi-krb5-2 libgtk2.0-0 libgtk2.0-bin libgts-0.7-5 libgts-bin
  libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libxcomposite1
  libxcursor1 libxdamage1 libxfixes3 libxi6 libxinerama1 libxrandr2
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
  diffstat libapt-pkg-perl libb-hooks-endofscope-perl libb-hooks-op-check-perl
  libberkeleydb-perl libcapture-tiny-perl libcgi-pm-perl
  libclass-accessor-perl libclass-method-modifiers-perl
  libclass-xsaccessor-perl libclone-perl libdevel-callchecker-perl
  libdigest-hmac-perl libdynaloader-functions-perl libemail-valid-perl
  libexporter-tiny-perl libfile-basedir-perl libfile-find-rule-perl
  libfont-ttf-perl libfuture-perl libhtml-parser-perl libhtml-tagset-perl
  libimport-into-perl libio-async-loop-epoll-perl libio-async-perl
  libio-pty-perl libio-socket-ssl-perl libipc-run-perl
  libipc-system-simple-perl liblinux-epoll-perl liblist-compare-perl
  liblist-moreutils-perl libmailtools-perl libmldbm-perl
  libmodule-implementation-perl libmodule-runtime-perl libmoo-perl
  libmoox-aliases-perl libnamespace-clean-perl libnet-dns-perl
  libnet-domain-tld-perl libnet-ip-perl libnet-smtp-ssl-perl
  libnet-ssleay-perl libnumber-compare-perl libpackage-stash-perl
  libparams-classify-perl libpath-tiny-perl librole-tiny-perl
  libstrictures-perl libstruct-dumb-perl libsub-exporter-progressive-perl
  libsub-identify-perl libsub-name-perl libsub-quote-perl libtext-glob-perl
  libtext-levenshtein-perl libtimedate-perl libtry-tiny-perl libtype-tiny-perl
  liburi-perl libvariable-magic-perl libyaml-0-2 libyaml-libyaml-perl lintian
  netbase patchutils perl-openssl-defaults t1utils
Suggested packages:
  libxml-parser-perl libdata-dump-perl ca-certificates libscalar-number-perl
  libbareword-filehandles-perl libindirect-perl libmultidimensional-perl
  libdevel-lexalias-perl libdevel-stacktrace-perl libwww-perl
  binutils-multiarch libtext-template-perl
Recommended packages:
  libcgi-fast-perl libhttp-message-perl libasync-mergepoint-perl
  libsereal-perl libtest-fatal-perl libtest-refcount-perl libfreezethaw-perl
  libdigest-bubblebabble-perl libnet-dns-sec-perl libnet-libidn-perl
  libperl4-corelibs-perl libauthen-sasl-perl libpackage-stash-xs-perl
  libunicode-utf8-perl libref-util-perl libtype-tiny-xs-perl
  libperlio-gzip-perl
The following NEW packages will be installed:
  diffstat libapt-pkg-perl libb-hooks-endofscope-perl libb-hooks-op-check-perl
  libberkeleydb-perl libcapture-tiny-perl libcgi-pm-perl
  libclass-accessor-perl libclass-method-modifiers-perl
  libclass-xsaccessor-perl libclone-perl libdevel-callchecker-perl
  libdigest-hmac-perl libdynaloader-functions-perl libemail-valid-perl
  libexporter-tiny-perl libfile-basedir-perl libfile-find-rule-perl
  libfont-ttf-perl libfuture-perl libhtml-parser-perl libhtml-tagset-perl
  libimport-into-perl libio-async-loop-epoll-perl libio-async-perl
  libio-pty-perl libio-socket-ssl-perl libipc-run-perl
  libipc-system-simple-perl liblinux-epoll-perl liblist-compare-perl
  liblist-moreutils-perl libmailtools-perl libmldbm-perl
  libmodule-implementation-perl libmodule-runtime-perl libmoo-perl
  libmoox-aliases-perl libnamespace-clean-perl libnet-dns-perl
  libnet-domain-tld-perl libnet-ip-perl libnet-smtp-ssl-perl
  libnet-ssleay-perl libnumber-compare-perl libpackage-stash-perl
  libparams-classify-perl libpath-tiny-perl librole-tiny-perl
  libstrictures-perl libstruct-dumb-perl libsub-exporter-progressive-perl
  libsub-identify-perl libsub-name-perl libsub-quote-perl libtext-glob-perl
  libtext-levenshtein-perl libtimedate-perl libtry-tiny-perl libtype-tiny-perl
  liburi-perl libvariable-magic-perl libyaml-0-2 libyaml-libyaml-perl lintian
  netbase patchutils perl-openssl-defaults
  sbuild-build-depends-lintian-dummy:armhf t1utils
0 upgraded, 70 newly installed, 0 to remove and 0 not upgraded.
Need to get 5264 kB/5410 kB of archives.
After this operation, 17.9 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [848 B]
Get:2 http://deb.debian.org/debian unstable/main amd64 libapt-pkg-perl amd64 0.1.36+b2 [71.3 kB]
Get:3 http://deb.debian.org/debian unstable/main amd64 libb-hooks-op-check-perl amd64 0.22-1+b2 [11.3 kB]
Get:4 http://deb.debian.org/debian unstable/main amd64 libdynaloader-functions-perl all 0.003-1 [12.6 kB]
Get:5 http://deb.debian.org/debian unstable/main amd64 libdevel-callchecker-perl amd64 0.008-1+b1 [15.9 kB]
Get:6 http://deb.debian.org/debian unstable/main amd64 libparams-classify-perl amd64 0.015-1+b2 [25.6 kB]
Get:7 http://deb.debian.org/debian unstable/main amd64 libmodule-runtime-perl all 0.016-1 [19.4 kB]
Get:8 http://deb.debian.org/debian unstable/main amd64 libtry-tiny-perl all 0.30-1 [23.3 kB]
Get:9 http://deb.debian.org/debian unstable/main amd64 libmodule-implementation-perl all 0.09-1 [12.9 kB]
Get:10 http://deb.debian.org/debian unstable/main amd64 libsub-exporter-progressive-perl all 0.001013-1 [7588 B]
Get:11 http://deb.debian.org/debian unstable/main amd64 libvariable-magic-perl amd64 0.62-1+b2 [46.0 kB]
Get:12 http://deb.debian.org/debian unstable/main amd64 libb-hooks-endofscope-perl all 0.24-1 [18.6 kB]
Get:13 http://deb.debian.org/debian unstable/main amd64 libberkeleydb-perl amd64 0.62-1+b1 [124 kB]
Get:14 http://deb.debian.org/debian unstable/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB]
Get:15 http://deb.debian.org/debian unstable/main amd64 libhtml-tagset-perl all 3.20-4 [13.0 kB]
Get:16 http://deb.debian.org/debian unstable/main amd64 liburi-perl all 1.76-1 [89.9 kB]
Get:17 http://deb.debian.org/debian unstable/main amd64 libhtml-parser-perl amd64 3.72-3+b4 [105 kB]
Get:18 http://deb.debian.org/debian unstable/main amd64 libcgi-pm-perl all 4.44-1 [223 kB]
Get:19 http://deb.debian.org/debian unstable/main amd64 libsub-name-perl amd64 0.26-1 [13.5 kB]
Get:20 http://deb.debian.org/debian unstable/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB]
Get:21 http://deb.debian.org/debian unstable/main amd64 libclass-method-modifiers-perl all 2.13-1 [19.2 kB]
Get:22 http://deb.debian.org/debian unstable/main amd64 libclass-xsaccessor-perl amd64 1.19-3+b3 [38.4 kB]
Get:23 http://deb.debian.org/debian unstable/main amd64 libclone-perl amd64 0.43-2 [15.0 kB]
Get:24 http://deb.debian.org/debian unstable/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB]
Get:25 http://deb.debian.org/debian unstable/main amd64 perl-openssl-defaults amd64 3 [6782 B]
Get:26 http://deb.debian.org/debian unstable/main amd64 libnet-ssleay-perl amd64 1.88-2 [321 kB]
Get:27 http://deb.debian.org/debian unstable/main amd64 libio-socket-ssl-perl all 2.066-1 [210 kB]
Get:28 http://deb.debian.org/debian unstable/main amd64 libnet-smtp-ssl-perl all 1.04-1 [6184 B]
Get:29 http://deb.debian.org/debian unstable/main amd64 libtimedate-perl all 2.3000-2 [42.2 kB]
Get:30 http://deb.debian.org/debian unstable/main amd64 libmailtools-perl all 2.21-1 [95.5 kB]
Get:31 http://deb.debian.org/debian unstable/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB]
Get:32 http://deb.debian.org/debian unstable/main amd64 libnet-dns-perl all 1.21-1 [368 kB]
Get:33 http://deb.debian.org/debian unstable/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB]
Get:34 http://deb.debian.org/debian unstable/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB]
Get:35 http://deb.debian.org/debian unstable/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB]
Get:36 http://deb.debian.org/debian unstable/main amd64 libipc-system-simple-perl all 1.25-5 [26.7 kB]
Get:37 http://deb.debian.org/debian unstable/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB]
Get:38 http://deb.debian.org/debian unstable/main amd64 libnumber-compare-perl all 0.03-1 [7642 B]
Get:39 http://deb.debian.org/debian unstable/main amd64 libtext-glob-perl all 0.10-1 [8362 B]
Get:40 http://deb.debian.org/debian unstable/main amd64 libfile-find-rule-perl all 0.34-1 [30.6 kB]
Get:41 http://deb.debian.org/debian unstable/main amd64 libfont-ttf-perl all 1.06-1 [317 kB]
Get:42 http://deb.debian.org/debian unstable/main amd64 libfuture-perl all 0.42-1 [82.6 kB]
Get:43 http://deb.debian.org/debian unstable/main amd64 libimport-into-perl all 1.002005-1 [11.6 kB]
Get:44 http://deb.debian.org/debian unstable/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB]
Get:45 http://deb.debian.org/debian unstable/main amd64 libio-async-perl all 0.75-1 [269 kB]
Get:46 http://deb.debian.org/debian unstable/main amd64 liblinux-epoll-perl amd64 0.017-1 [16.8 kB]
Get:47 http://deb.debian.org/debian unstable/main amd64 libio-async-loop-epoll-perl all 0.20-1 [11.9 kB]
Get:48 http://deb.debian.org/debian unstable/main amd64 libio-pty-perl amd64 1:1.12-1 [36.3 kB]
Get:49 http://deb.debian.org/debian unstable/main amd64 libipc-run-perl all 20180523.0-2 [101 kB]
Get:50 http://deb.debian.org/debian unstable/main amd64 liblist-compare-perl all 0.53-1 [68.9 kB]
Get:51 http://deb.debian.org/debian unstable/main amd64 liblist-moreutils-perl amd64 0.416-1+b5 [63.6 kB]
Get:52 http://deb.debian.org/debian unstable/main amd64 libmldbm-perl all 2.05-2 [18.4 kB]
Get:53 http://deb.debian.org/debian unstable/main amd64 librole-tiny-perl all 2.001004-1 [20.8 kB]
Get:54 http://deb.debian.org/debian unstable/main amd64 libstrictures-perl all 2.000006-1 [18.6 kB]
Get:55 http://deb.debian.org/debian unstable/main amd64 libsub-quote-perl all 2.006006-1 [21.0 kB]
Get:56 http://deb.debian.org/debian unstable/main amd64 libmoo-perl all 2.003006-1 [58.7 kB]
Get:57 http://deb.debian.org/debian unstable/main amd64 libmoox-aliases-perl all 0.001006-1 [10.2 kB]
Get:58 http://deb.debian.org/debian unstable/main amd64 libpackage-stash-perl all 0.38-1 [21.7 kB]
Get:59 http://deb.debian.org/debian unstable/main amd64 libsub-identify-perl amd64 0.14-1+b2 [12.0 kB]
Get:60 http://deb.debian.org/debian unstable/main amd64 libnamespace-clean-perl all 0.27-1 [17.3 kB]
Get:61 http://deb.debian.org/debian unstable/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB]
Get:62 http://deb.debian.org/debian unstable/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB]
Get:63 http://deb.debian.org/debian unstable/main amd64 libtype-tiny-perl all 1.008000-1 [332 kB]
Get:64 http://deb.debian.org/debian unstable/main amd64 libyaml-0-2 amd64 0.2.2-1 [49.6 kB]
Get:65 http://deb.debian.org/debian unstable/main amd64 libyaml-libyaml-perl amd64 0.80+repack-2+b1 [34.8 kB]
Get:66 http://deb.debian.org/debian unstable/main amd64 t1utils amd64 1.41-3 [62.3 kB]
Get:67 http://deb.debian.org/debian unstable/main amd64 lintian all 2.42.0 [1304 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 5264 kB in 2s (2465 kB/s)
Selecting previously unselected package netbase.
(Reading database ... 31438 files and directories currently installed.)
Preparing to unpack .../00-netbase_5.8_all.deb ...
Unpacking netbase (5.8) ...
Selecting previously unselected package diffstat.
Preparing to unpack .../01-diffstat_1.63-1_amd64.deb ...
Unpacking diffstat (1.63-1) ...
Selecting previously unselected package libapt-pkg-perl.
Preparing to unpack .../02-libapt-pkg-perl_0.1.36+b2_amd64.deb ...
Unpacking libapt-pkg-perl (0.1.36+b2) ...
Selecting previously unselected package libb-hooks-op-check-perl.
Preparing to unpack .../03-libb-hooks-op-check-perl_0.22-1+b2_amd64.deb ...
Unpacking libb-hooks-op-check-perl (0.22-1+b2) ...
Selecting previously unselected package libdynaloader-functions-perl.
Preparing to unpack .../04-libdynaloader-functions-perl_0.003-1_all.deb ...
Unpacking libdynaloader-functions-perl (0.003-1) ...
Selecting previously unselected package libdevel-callchecker-perl.
Preparing to unpack .../05-libdevel-callchecker-perl_0.008-1+b1_amd64.deb ...
Unpacking libdevel-callchecker-perl (0.008-1+b1) ...
Selecting previously unselected package libparams-classify-perl.
Preparing to unpack .../06-libparams-classify-perl_0.015-1+b2_amd64.deb ...
Unpacking libparams-classify-perl (0.015-1+b2) ...
Selecting previously unselected package libmodule-runtime-perl.
Preparing to unpack .../07-libmodule-runtime-perl_0.016-1_all.deb ...
Unpacking libmodule-runtime-perl (0.016-1) ...
Selecting previously unselected package libtry-tiny-perl.
Preparing to unpack .../08-libtry-tiny-perl_0.30-1_all.deb ...
Unpacking libtry-tiny-perl (0.30-1) ...
Selecting previously unselected package libmodule-implementation-perl.
Preparing to unpack .../09-libmodule-implementation-perl_0.09-1_all.deb ...
Unpacking libmodule-implementation-perl (0.09-1) ...
Selecting previously unselected package libsub-exporter-progressive-perl.
Preparing to unpack .../10-libsub-exporter-progressive-perl_0.001013-1_all.deb ...
Unpacking libsub-exporter-progressive-perl (0.001013-1) ...
Selecting previously unselected package libvariable-magic-perl.
Preparing to unpack .../11-libvariable-magic-perl_0.62-1+b2_amd64.deb ...
Unpacking libvariable-magic-perl (0.62-1+b2) ...
Selecting previously unselected package libb-hooks-endofscope-perl.
Preparing to unpack .../12-libb-hooks-endofscope-perl_0.24-1_all.deb ...
Unpacking libb-hooks-endofscope-perl (0.24-1) ...
Selecting previously unselected package libberkeleydb-perl:amd64.
Preparing to unpack .../13-libberkeleydb-perl_0.62-1+b1_amd64.deb ...
Unpacking libberkeleydb-perl:amd64 (0.62-1+b1) ...
Selecting previously unselected package libcapture-tiny-perl.
Preparing to unpack .../14-libcapture-tiny-perl_0.48-1_all.deb ...
Unpacking libcapture-tiny-perl (0.48-1) ...
Selecting previously unselected package libhtml-tagset-perl.
Preparing to unpack .../15-libhtml-tagset-perl_3.20-4_all.deb ...
Unpacking libhtml-tagset-perl (3.20-4) ...
Selecting previously unselected package liburi-perl.
Preparing to unpack .../16-liburi-perl_1.76-1_all.deb ...
Unpacking liburi-perl (1.76-1) ...
Selecting previously unselected package libhtml-parser-perl.
Preparing to unpack .../17-libhtml-parser-perl_3.72-3+b4_amd64.deb ...
Unpacking libhtml-parser-perl (3.72-3+b4) ...
Selecting previously unselected package libcgi-pm-perl.
Preparing to unpack .../18-libcgi-pm-perl_4.44-1_all.deb ...
Unpacking libcgi-pm-perl (4.44-1) ...
Selecting previously unselected package libsub-name-perl.
Preparing to unpack .../19-libsub-name-perl_0.26-1_amd64.deb ...
Unpacking libsub-name-perl (0.26-1) ...
Selecting previously unselected package libclass-accessor-perl.
Preparing to unpack .../20-libclass-accessor-perl_0.51-1_all.deb ...
Unpacking libclass-accessor-perl (0.51-1) ...
Selecting previously unselected package libclass-method-modifiers-perl.
Preparing to unpack .../21-libclass-method-modifiers-perl_2.13-1_all.deb ...
Unpacking libclass-method-modifiers-perl (2.13-1) ...
Selecting previously unselected package libclass-xsaccessor-perl.
Preparing to unpack .../22-libclass-xsaccessor-perl_1.19-3+b3_amd64.deb ...
Unpacking libclass-xsaccessor-perl (1.19-3+b3) ...
Selecting previously unselected package libclone-perl.
Preparing to unpack .../23-libclone-perl_0.43-2_amd64.deb ...
Unpacking libclone-perl (0.43-2) ...
Selecting previously unselected package libdigest-hmac-perl.
Preparing to unpack .../24-libdigest-hmac-perl_1.03+dfsg-2_all.deb ...
Unpacking libdigest-hmac-perl (1.03+dfsg-2) ...
Selecting previously unselected package perl-openssl-defaults:amd64.
Preparing to unpack .../25-perl-openssl-defaults_3_amd64.deb ...
Unpacking perl-openssl-defaults:amd64 (3) ...
Selecting previously unselected package libnet-ssleay-perl.
Preparing to unpack .../26-libnet-ssleay-perl_1.88-2_amd64.deb ...
Unpacking libnet-ssleay-perl (1.88-2) ...
Selecting previously unselected package libio-socket-ssl-perl.
Preparing to unpack .../27-libio-socket-ssl-perl_2.066-1_all.deb ...
Unpacking libio-socket-ssl-perl (2.066-1) ...
Selecting previously unselected package libnet-smtp-ssl-perl.
Preparing to unpack .../28-libnet-smtp-ssl-perl_1.04-1_all.deb ...
Unpacking libnet-smtp-ssl-perl (1.04-1) ...
Selecting previously unselected package libtimedate-perl.
Preparing to unpack .../29-libtimedate-perl_2.3000-2_all.deb ...
Unpacking libtimedate-perl (2.3000-2) ...
Selecting previously unselected package libmailtools-perl.
Preparing to unpack .../30-libmailtools-perl_2.21-1_all.deb ...
Unpacking libmailtools-perl (2.21-1) ...
Selecting previously unselected package libnet-ip-perl.
Preparing to unpack .../31-libnet-ip-perl_1.26-2_all.deb ...
Unpacking libnet-ip-perl (1.26-2) ...
Selecting previously unselected package libnet-dns-perl.
Preparing to unpack .../32-libnet-dns-perl_1.21-1_all.deb ...
Unpacking libnet-dns-perl (1.21-1) ...
Selecting previously unselected package libnet-domain-tld-perl.
Preparing to unpack .../33-libnet-domain-tld-perl_1.75-1_all.deb ...
Unpacking libnet-domain-tld-perl (1.75-1) ...
Selecting previously unselected package libemail-valid-perl.
Preparing to unpack .../34-libemail-valid-perl_1.202-1_all.deb ...
Unpacking libemail-valid-perl (1.202-1) ...
Selecting previously unselected package libexporter-tiny-perl.
Preparing to unpack .../35-libexporter-tiny-perl_1.002001-1_all.deb ...
Unpacking libexporter-tiny-perl (1.002001-1) ...
Selecting previously unselected package libipc-system-simple-perl.
Preparing to unpack .../36-libipc-system-simple-perl_1.25-5_all.deb ...
Unpacking libipc-system-simple-perl (1.25-5) ...
Selecting previously unselected package libfile-basedir-perl.
Preparing to unpack .../37-libfile-basedir-perl_0.08-1_all.deb ...
Unpacking libfile-basedir-perl (0.08-1) ...
Selecting previously unselected package libnumber-compare-perl.
Preparing to unpack .../38-libnumber-compare-perl_0.03-1_all.deb ...
Unpacking libnumber-compare-perl (0.03-1) ...
Selecting previously unselected package libtext-glob-perl.
Preparing to unpack .../39-libtext-glob-perl_0.10-1_all.deb ...
Unpacking libtext-glob-perl (0.10-1) ...
Selecting previously unselected package libfile-find-rule-perl.
Preparing to unpack .../40-libfile-find-rule-perl_0.34-1_all.deb ...
Unpacking libfile-find-rule-perl (0.34-1) ...
Selecting previously unselected package libfont-ttf-perl.
Preparing to unpack .../41-libfont-ttf-perl_1.06-1_all.deb ...
Unpacking libfont-ttf-perl (1.06-1) ...
Selecting previously unselected package libfuture-perl.
Preparing to unpack .../42-libfuture-perl_0.42-1_all.deb ...
Unpacking libfuture-perl (0.42-1) ...
Selecting previously unselected package libimport-into-perl.
Preparing to unpack .../43-libimport-into-perl_1.002005-1_all.deb ...
Unpacking libimport-into-perl (1.002005-1) ...
Selecting previously unselected package libstruct-dumb-perl.
Preparing to unpack .../44-libstruct-dumb-perl_0.09-1_all.deb ...
Unpacking libstruct-dumb-perl (0.09-1) ...
Selecting previously unselected package libio-async-perl.
Preparing to unpack .../45-libio-async-perl_0.75-1_all.deb ...
Unpacking libio-async-perl (0.75-1) ...
Selecting previously unselected package liblinux-epoll-perl.
Preparing to unpack .../46-liblinux-epoll-perl_0.017-1_amd64.deb ...
Unpacking liblinux-epoll-perl (0.017-1) ...
Selecting previously unselected package libio-async-loop-epoll-perl.
Preparing to unpack .../47-libio-async-loop-epoll-perl_0.20-1_all.deb ...
Unpacking libio-async-loop-epoll-perl (0.20-1) ...
Selecting previously unselected package libio-pty-perl.
Preparing to unpack .../48-libio-pty-perl_1%3a1.12-1_amd64.deb ...
Unpacking libio-pty-perl (1:1.12-1) ...
Selecting previously unselected package libipc-run-perl.
Preparing to unpack .../49-libipc-run-perl_20180523.0-2_all.deb ...
Unpacking libipc-run-perl (20180523.0-2) ...
Selecting previously unselected package liblist-compare-perl.
Preparing to unpack .../50-liblist-compare-perl_0.53-1_all.deb ...
Unpacking liblist-compare-perl (0.53-1) ...
Selecting previously unselected package liblist-moreutils-perl.
Preparing to unpack .../51-liblist-moreutils-perl_0.416-1+b5_amd64.deb ...
Unpacking liblist-moreutils-perl (0.416-1+b5) ...
Selecting previously unselected package libmldbm-perl.
Preparing to unpack .../52-libmldbm-perl_2.05-2_all.deb ...
Unpacking libmldbm-perl (2.05-2) ...
Selecting previously unselected package librole-tiny-perl.
Preparing to unpack .../53-librole-tiny-perl_2.001004-1_all.deb ...
Unpacking librole-tiny-perl (2.001004-1) ...
Selecting previously unselected package libstrictures-perl.
Preparing to unpack .../54-libstrictures-perl_2.000006-1_all.deb ...
Unpacking libstrictures-perl (2.000006-1) ...
Selecting previously unselected package libsub-quote-perl.
Preparing to unpack .../55-libsub-quote-perl_2.006006-1_all.deb ...
Unpacking libsub-quote-perl (2.006006-1) ...
Selecting previously unselected package libmoo-perl.
Preparing to unpack .../56-libmoo-perl_2.003006-1_all.deb ...
Unpacking libmoo-perl (2.003006-1) ...
Selecting previously unselected package libmoox-aliases-perl.
Preparing to unpack .../57-libmoox-aliases-perl_0.001006-1_all.deb ...
Unpacking libmoox-aliases-perl (0.001006-1) ...
Selecting previously unselected package libpackage-stash-perl.
Preparing to unpack .../58-libpackage-stash-perl_0.38-1_all.deb ...
Unpacking libpackage-stash-perl (0.38-1) ...
Selecting previously unselected package libsub-identify-perl.
Preparing to unpack .../59-libsub-identify-perl_0.14-1+b2_amd64.deb ...
Unpacking libsub-identify-perl (0.14-1+b2) ...
Selecting previously unselected package libnamespace-clean-perl.
Preparing to unpack .../60-libnamespace-clean-perl_0.27-1_all.deb ...
Unpacking libnamespace-clean-perl (0.27-1) ...
Selecting previously unselected package libpath-tiny-perl.
Preparing to unpack .../61-libpath-tiny-perl_0.108-1_all.deb ...
Unpacking libpath-tiny-perl (0.108-1) ...
Selecting previously unselected package libtext-levenshtein-perl.
Preparing to unpack .../62-libtext-levenshtein-perl_0.13-1_all.deb ...
Unpacking libtext-levenshtein-perl (0.13-1) ...
Selecting previously unselected package libtype-tiny-perl.
Preparing to unpack .../63-libtype-tiny-perl_1.008000-1_all.deb ...
Unpacking libtype-tiny-perl (1.008000-1) ...
Selecting previously unselected package libyaml-0-2:amd64.
Preparing to unpack .../64-libyaml-0-2_0.2.2-1_amd64.deb ...
Unpacking libyaml-0-2:amd64 (0.2.2-1) ...
Selecting previously unselected package libyaml-libyaml-perl.
Preparing to unpack .../65-libyaml-libyaml-perl_0.80+repack-2+b1_amd64.deb ...
Unpacking libyaml-libyaml-perl (0.80+repack-2+b1) ...
Selecting previously unselected package patchutils.
Preparing to unpack .../66-patchutils_0.3.4-2+b1_amd64.deb ...
Unpacking patchutils (0.3.4-2+b1) ...
Selecting previously unselected package t1utils.
Preparing to unpack .../67-t1utils_1.41-3_amd64.deb ...
Unpacking t1utils (1.41-3) ...
Selecting previously unselected package lintian.
Preparing to unpack .../68-lintian_2.42.0_all.deb ...
Unpacking lintian (2.42.0) ...
Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf.
Preparing to unpack .../69-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Setting up libapt-pkg-perl (0.1.36+b2) ...
Setting up libberkeleydb-perl:amd64 (0.62-1+b1) ...
Setting up libstruct-dumb-perl (0.09-1) ...
Setting up libdynaloader-functions-perl (0.003-1) ...
Setting up libtext-glob-perl (0.10-1) ...
Setting up libclass-method-modifiers-perl (2.13-1) ...
Setting up liblist-compare-perl (0.53-1) ...
Setting up libio-pty-perl (1:1.12-1) ...
Setting up libclone-perl (0.43-2) ...
Setting up libyaml-0-2:amd64 (0.2.2-1) ...
Setting up libsub-identify-perl (0.14-1+b2) ...
Setting up libhtml-tagset-perl (3.20-4) ...
Setting up libfuture-perl (0.42-1) ...
Setting up libyaml-libyaml-perl (0.80+repack-2+b1) ...
Setting up libtry-tiny-perl (0.30-1) ...
Setting up perl-openssl-defaults:amd64 (3) ...
Setting up libmldbm-perl (2.05-2) ...
Setting up libtext-levenshtein-perl (0.13-1) ...
Setting up libnumber-compare-perl (0.03-1) ...
Setting up libio-async-perl (0.75-1) ...
Setting up patchutils (0.3.4-2+b1) ...
Setting up libfile-find-rule-perl (0.34-1) ...
Setting up libdigest-hmac-perl (1.03+dfsg-2) ...
Setting up libipc-system-simple-perl (1.25-5) ...
Setting up libnet-domain-tld-perl (1.75-1) ...
Setting up t1utils (1.41-3) ...
Setting up liblinux-epoll-perl (0.017-1) ...
Setting up diffstat (1.63-1) ...
Setting up libvariable-magic-perl (0.62-1+b2) ...
Setting up libb-hooks-op-check-perl (0.22-1+b2) ...
Setting up libipc-run-perl (20180523.0-2) ...
Setting up libsub-exporter-progressive-perl (0.001013-1) ...
Setting up libcapture-tiny-perl (0.48-1) ...
Setting up libtimedate-perl (2.3000-2) ...
Setting up libsub-name-perl (0.26-1) ...
Setting up libpath-tiny-perl (0.108-1) ...
Setting up librole-tiny-perl (2.001004-1) ...
Setting up netbase (5.8) ...
Setting up libstrictures-perl (2.000006-1) ...
Setting up libsub-quote-perl (2.006006-1) ...
Setting up libclass-xsaccessor-perl (1.19-3+b3) ...
Setting up libexporter-tiny-perl (1.002001-1) ...
Setting up libclass-accessor-perl (0.51-1) ...
Setting up libfont-ttf-perl (1.06-1) ...
Setting up libnet-ip-perl (1.26-2) ...
Setting up liburi-perl (1.76-1) ...
Setting up libnet-ssleay-perl (1.88-2) ...
Setting up libfile-basedir-perl (0.08-1) ...
Setting up liblist-moreutils-perl (0.416-1+b5) ...
Setting up libtype-tiny-perl (1.008000-1) ...
Setting up libnet-dns-perl (1.21-1) ...
Setting up libdevel-callchecker-perl (0.008-1+b1) ...
Setting up libio-async-loop-epoll-perl (0.20-1) ...
Setting up libhtml-parser-perl (3.72-3+b4) ...
Setting up libio-socket-ssl-perl (2.066-1) ...
Setting up libparams-classify-perl (0.015-1+b2) ...
Setting up libcgi-pm-perl (4.44-1) ...
Setting up libnet-smtp-ssl-perl (1.04-1) ...
Setting up libmodule-runtime-perl (0.016-1) ...
Setting up libmailtools-perl (2.21-1) ...
Setting up libmodule-implementation-perl (0.09-1) ...
Setting up libemail-valid-perl (1.202-1) ...
Setting up libpackage-stash-perl (0.38-1) ...
Setting up libimport-into-perl (1.002005-1) ...
Setting up libmoo-perl (2.003006-1) ...
Setting up libmoox-aliases-perl (0.001006-1) ...
Setting up libb-hooks-endofscope-perl (0.24-1) ...
Setting up libnamespace-clean-perl (0.27-1) ...
Setting up lintian (2.42.0) ...
Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Processing triggers for man-db (2.9.0-2) ...
Not building database; man-db/auto-update is not 'true'.
Processing triggers for libc-bin (2.29-6) ...

I: Lintian run was successful.

+------------------------------------------------------------------------------+
| Post Build                                                                   |
+------------------------------------------------------------------------------+


+------------------------------------------------------------------------------+
| Cleanup                                                                      |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  dbus krb5-locales libapparmor1 libatk1.0-0 libavahi-client3
  libavahi-common-data libavahi-common3 libcups2 libdbus-1-3 libgail-common
  libgail18 libgssapi-krb5-2 libgtk2.0-0 libgtk2.0-bin libgts-0.7-5 libgts-bin
  libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libxcomposite1
  libxcursor1 libxdamage1 libxfixes3 libxi6 libxinerama1 libxrandr2
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  dbus krb5-locales libapparmor1 libatk1.0-0 libavahi-client3
  libavahi-common-data libavahi-common3 libcups2 libdbus-1-3 libgail-common
  libgail18 libgssapi-krb5-2 libgtk2.0-0 libgtk2.0-bin libgts-0.7-5 libgts-bin
  libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libxcomposite1
  libxcursor1 libxdamage1 libxfixes3 libxi6 libxinerama1 libxrandr2
Use 'apt autoremove' to remove them.
The following packages will be REMOVED:
  diffstat* libapt-pkg-perl* libb-hooks-endofscope-perl*
  libb-hooks-op-check-perl* libberkeleydb-perl* libcapture-tiny-perl*
  libcgi-pm-perl* libclass-accessor-perl* libclass-method-modifiers-perl*
  libclass-xsaccessor-perl* libclone-perl* libdevel-callchecker-perl*
  libdigest-hmac-perl* libdynaloader-functions-perl* libemail-valid-perl*
  libexporter-tiny-perl* libfile-basedir-perl* libfile-find-rule-perl*
  libfont-ttf-perl* libfuture-perl* libhtml-parser-perl* libhtml-tagset-perl*
  libimport-into-perl* libio-async-loop-epoll-perl* libio-async-perl*
  libio-pty-perl* libio-socket-ssl-perl* libipc-run-perl*
  libipc-system-simple-perl* liblinux-epoll-perl* liblist-compare-perl*
  liblist-moreutils-perl* libmailtools-perl* libmldbm-perl*
  libmodule-implementation-perl* libmodule-runtime-perl* libmoo-perl*
  libmoox-aliases-perl* libnamespace-clean-perl* libnet-dns-perl*
  libnet-domain-tld-perl* libnet-ip-perl* libnet-smtp-ssl-perl*
  libnet-ssleay-perl* libnumber-compare-perl* libpackage-stash-perl*
  libparams-classify-perl* libpath-tiny-perl* librole-tiny-perl*
  libserd-0-0:armhf* libserd-dev:armhf* libsord-0-0:armhf* libsord-dev:armhf*
  libstrictures-perl* libstruct-dumb-perl* libsub-exporter-progressive-perl*
  libsub-identify-perl* libsub-name-perl* libsub-quote-perl*
  libtext-glob-perl* libtext-levenshtein-perl* libtimedate-perl*
  libtry-tiny-perl* libtype-tiny-perl* liburi-perl* libvariable-magic-perl*
  libyaml-0-2* libyaml-libyaml-perl* lintian* lv2-dev:armhf* netbase*
  patchutils* perl-openssl-defaults* sbuild-build-depends-lintian-dummy:armhf*
  sbuild-build-depends-main-dummy:armhf* t1utils*
0 upgraded, 0 newly installed, 76 to remove and 0 not upgraded.
After this operation, 19.0 MB disk space will be freed.
(Reading database ... 35400 files and directories currently installed.)
Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Removing lintian (2.42.0) ...
Removing diffstat (1.63-1) ...
Removing libapt-pkg-perl (0.1.36+b2) ...
Removing libnamespace-clean-perl (0.27-1) ...
Removing libb-hooks-endofscope-perl (0.24-1) ...
Removing libmoox-aliases-perl (0.001006-1) ...
Removing libmoo-perl (2.003006-1) ...
Removing libpackage-stash-perl (0.38-1) ...
Removing libmodule-implementation-perl (0.09-1) ...
Removing libberkeleydb-perl:amd64 (0.62-1+b1) ...
Removing libcapture-tiny-perl (0.48-1) ...
Removing libcgi-pm-perl (4.44-1) ...
Removing libclass-accessor-perl (0.51-1) ...
Removing librole-tiny-perl (2.001004-1) ...
Removing libclass-method-modifiers-perl (2.13-1) ...
Removing libclass-xsaccessor-perl (1.19-3+b3) ...
Removing libclone-perl (0.43-2) ...
Removing libemail-valid-perl (1.202-1) ...
Removing libnet-dns-perl (1.21-1) ...
Removing libdigest-hmac-perl (1.03+dfsg-2) ...
Removing libtype-tiny-perl (1.008000-1) ...
Removing liblist-moreutils-perl (0.416-1+b5) ...
Removing libexporter-tiny-perl (1.002001-1) ...
Removing libfile-basedir-perl (0.08-1) ...
Removing libfile-find-rule-perl (0.34-1) ...
Removing libfont-ttf-perl (1.06-1) ...
Removing libio-async-loop-epoll-perl (0.20-1) ...
Removing libio-async-perl (0.75-1) ...
Removing libfuture-perl (0.42-1) ...
Removing libhtml-parser-perl (3.72-3+b4) ...
Removing libhtml-tagset-perl (3.20-4) ...
Removing libimport-into-perl (1.002005-1) ...
Removing libipc-run-perl (20180523.0-2) ...
Removing libio-pty-perl (1:1.12-1) ...
Removing libmailtools-perl (2.21-1) ...
Removing libnet-smtp-ssl-perl (1.04-1) ...
Removing libio-socket-ssl-perl (2.066-1) ...
Removing libipc-system-simple-perl (1.25-5) ...
Removing liblinux-epoll-perl (0.017-1) ...
Removing liblist-compare-perl (0.53-1) ...
Removing libmldbm-perl (2.05-2) ...
Removing libnet-domain-tld-perl (1.75-1) ...
Removing libnet-ip-perl (1.26-2) ...
Removing libnet-ssleay-perl (1.88-2) ...
Removing libnumber-compare-perl (0.03-1) ...
Removing libpath-tiny-perl (0.108-1) ...
Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Removing libsord-dev:armhf (0.16.4-1) ...
Removing libsord-0-0:armhf (0.16.4-1) ...
Removing libserd-dev:armhf (0.30.2-1) ...
Removing libserd-0-0:armhf (0.30.2-1) ...
Removing libstrictures-perl (2.000006-1) ...
Removing libstruct-dumb-perl (0.09-1) ...
Removing libsub-exporter-progressive-perl (0.001013-1) ...
Removing libsub-identify-perl (0.14-1+b2) ...
Removing libsub-name-perl (0.26-1) ...
Removing libsub-quote-perl (2.006006-1) ...
Removing libtext-glob-perl (0.10-1) ...
Removing libtext-levenshtein-perl (0.13-1) ...
Removing libtimedate-perl (2.3000-2) ...
Removing libtry-tiny-perl (0.30-1) ...
Removing liburi-perl (1.76-1) ...
Removing libvariable-magic-perl (0.62-1+b2) ...
Removing libyaml-libyaml-perl (0.80+repack-2+b1) ...
Removing libyaml-0-2:amd64 (0.2.2-1) ...
Removing lv2-dev:armhf (1.16.0-1) ...
Removing netbase (5.8) ...
Removing patchutils (0.3.4-2+b1) ...
Removing perl-openssl-defaults:amd64 (3) ...
Removing t1utils (1.41-3) ...
Removing libmodule-runtime-perl (0.016-1) ...
Removing libparams-classify-perl (0.015-1+b2) ...
Removing libdevel-callchecker-perl (0.008-1+b1) ...
Removing libb-hooks-op-check-perl (0.22-1+b2) ...
Removing libdynaloader-functions-perl (0.003-1) ...
Processing triggers for man-db (2.9.0-2) ...
Not building database; man-db/auto-update is not 'true'.
Processing triggers for libc-bin (2.29-6) ...
(Reading database ... 31212 files and directories currently installed.)
Purging configuration files for lintian (2.42.0) ...
Purging configuration files for netbase (5.8) ...

+------------------------------------------------------------------------------+
| Summary                                                                      |
+------------------------------------------------------------------------------+

Build Architecture: amd64
Build Profiles: cross nocheck
Build Type: any
Build-Space: 3692
Build-Time: 6
Distribution: unstable-amd64-sbuild
Foreign Architectures: armhf
Host Architecture: armhf
Install-Time: 3
Job: /home/build/sbuild-setup/repo/pool/main/s/sratom/sratom_0.6.4-1.dsc
Lintian: pass
Machine Architecture: amd64
Package: sratom
Package-Time: 13
Source-Version: 0.6.4-1
Space: 3692
Status: successful
Version: 0.6.4-1
--------------------------------------------------------------------------------
Finished at 2019-12-21T12:56:36Z
Build needed 00:00:13, 3692k disk space