sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 36857dea695f +==============================================================================+ | wmcpuload 1.1.1-2 (armhf) Thu, 07 Mar 2019 11:59:21 +0000 | +==============================================================================+ Package: wmcpuload Version: 1.1.1-2 Source Version: 1.1.1-2 Distribution: unstable-amd64-sbuild Machine Architecture: amd64 Host Architecture: armhf Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-134dacaa-563a-4271-9da4-9c9ff8537779' with '<>' I: NOTICE: Log filtering will replace 'build/wmcpuload-4aClV4/resolver-GUyF2K' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Hit:1 http://cdn-fastly.deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /home/build/sbuild-setup/repo/pool/main/w/wmcpuload/wmcpuload_1.1.1-2.dsc exists in /home/build/sbuild-setup/repo/pool/main/w/wmcpuload; copying to chroot I: NOTICE: Log filtering will replace 'build/wmcpuload-4aClV4/wmcpuload-1.1.1' with '<>' I: NOTICE: Log filtering will replace 'build/wmcpuload-4aClV4' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper (>= 11), libx11-dev, libxext-dev, libxmu-dev, libxpm-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf Filtered Build-Depends: debhelper (>= 11), libx11-dev, libxext-dev, libxmu-dev, libxpm-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [412 B] Get:5 copy:/<>/apt_archive ./ Packages [503 B] Fetched 1872 B in 0s (120 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libbsd0 libbsd0:armhf libc6:armhf libc6-dev:armhf libcroco3 libelf1 libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf libice-dev:armhf libice6:armhf libncurses6 libpipeline1 libpthread-stubs0-dev libpthread-stubs0-dev:armhf libsigsegv2 libsm-dev:armhf libsm6:armhf libstdc++-8-dev:armhf libstdc++6:armhf libtool libubsan1:armhf libuchardet0 libuuid1:armhf libx11-6 libx11-6:armhf libx11-data libx11-dev libx11-dev:armhf libxau-dev libxau-dev:armhf libxau6 libxau6:armhf libxcb1 libxcb1:armhf libxcb1-dev libxcb1-dev:armhf libxdmcp-dev libxdmcp-dev:armhf libxdmcp6 libxdmcp6:armhf libxext-dev:armhf libxext6:armhf libxmu-dev:armhf libxmu-headers libxmu6:armhf libxpm-dev:armhf libxpm4:armhf libxt-dev:armhf libxt6:armhf linux-libc-dev:armhf m4 man-db po-debconf x11-common x11proto-core-dev x11proto-dev x11proto-xext-dev xorg-sgml-doctools xtrans-dev Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf libice-doc:armhf libsm-doc:armhf libstdc++-8-doc:armhf libtool-doc gfortran | fortran95-compiler gcj-jdk libx11-doc libx11-doc:armhf libxcb-doc libxcb-doc:armhf libxext-doc:armhf libxt-doc:armhf m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libidn2-0:armhf libarchive-cpio-perl libglib2.0-data shared-mime-info xdg-user-dirs libgpm2 libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libbsd0 libbsd0:armhf libc6:armhf libc6-dev:armhf libcroco3 libelf1 libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf libice-dev:armhf libice6:armhf libncurses6 libpipeline1 libpthread-stubs0-dev libpthread-stubs0-dev:armhf libsigsegv2 libsm-dev:armhf libsm6:armhf libstdc++-8-dev:armhf libstdc++6:armhf libtool libubsan1:armhf libuchardet0 libuuid1:armhf libx11-6 libx11-6:armhf libx11-data libx11-dev libx11-dev:armhf libxau-dev libxau-dev:armhf libxau6 libxau6:armhf libxcb1 libxcb1:armhf libxcb1-dev libxcb1-dev:armhf libxdmcp-dev libxdmcp-dev:armhf libxdmcp6 libxdmcp6:armhf libxext-dev:armhf libxext6:armhf libxmu-dev:armhf libxmu-headers libxmu6:armhf libxpm-dev:armhf libxpm4:armhf libxt-dev:armhf libxt6:armhf linux-libc-dev:armhf m4 man-db po-debconf sbuild-build-depends-main-dummy:armhf x11-common x11proto-core-dev x11proto-dev x11proto-xext-dev xorg-sgml-doctools xtrans-dev 0 upgraded, 80 newly installed, 0 to remove and 0 not upgraded. Need to get 920 B/24.7 MB of archives. After this operation, 96.3 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [920 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 920 B in 0s (0 B/s) Selecting previously unselected package libbsd0:amd64. (Reading database ... 16457 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_amd64.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../07-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../08-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../09-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../10-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../11-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../12-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../13-libtool_2.4.6-10_all.deb ... Unpacking libtool (2.4.6-10) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../14-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../15-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../16-libfile-stripnondeterminism-perl_1.1.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../17-dh-strip-nondeterminism_1.1.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../18-libelf1_0.176-1_amd64.deb ... Unpacking libelf1:amd64 (0.176-1) ... Selecting previously unselected package dwz. Preparing to unpack .../19-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../20-libglib2.0-0_2.58.3-1_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-1) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../21-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../22-libncurses6_6.1+20181013-2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2) ... Selecting previously unselected package gettext. Preparing to unpack .../23-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../24-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../25-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../26-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package gcc-8-base:armhf. Preparing to unpack .../27-gcc-8-base_8.3.0-2_armhf.deb ... Unpacking gcc-8-base:armhf (8.3.0-2) ... Selecting previously unselected package libgcc1:armhf. Preparing to unpack .../28-libgcc1_1%3a8.3.0-2_armhf.deb ... Unpacking libgcc1:armhf (1:8.3.0-2) ... Selecting previously unselected package libc6:armhf. Preparing to unpack .../29-libc6_2.28-8_armhf.deb ... Unpacking libc6:armhf (2.28-8) ... Selecting previously unselected package libstdc++6:armhf. Preparing to unpack .../30-libstdc++6_8.3.0-2_armhf.deb ... Unpacking libstdc++6:armhf (8.3.0-2) ... Selecting previously unselected package libasan5:armhf. Preparing to unpack .../31-libasan5_8.3.0-2_armhf.deb ... Unpacking libasan5:armhf (8.3.0-2) ... Selecting previously unselected package libatomic1:armhf. Preparing to unpack .../32-libatomic1_8.3.0-2_armhf.deb ... Unpacking libatomic1:armhf (8.3.0-2) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../33-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package linux-libc-dev:armhf. Preparing to unpack .../34-linux-libc-dev_4.19.20-1_armhf.deb ... Unpacking linux-libc-dev:armhf (4.19.20-1) ... Selecting previously unselected package libc6-dev:armhf. Preparing to unpack .../35-libc6-dev_2.28-8_armhf.deb ... Unpacking libc6-dev:armhf (2.28-8) ... Selecting previously unselected package libgomp1:armhf. Preparing to unpack .../36-libgomp1_8.3.0-2_armhf.deb ... Unpacking libgomp1:armhf (8.3.0-2) ... Selecting previously unselected package libubsan1:armhf. Preparing to unpack .../37-libubsan1_8.3.0-2_armhf.deb ... Unpacking libubsan1:armhf (8.3.0-2) ... Selecting previously unselected package libgcc-8-dev:armhf. Preparing to unpack .../38-libgcc-8-dev_8.3.0-2_armhf.deb ... Unpacking libgcc-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package x11-common. Preparing to unpack .../39-x11-common_1%3a7.7+19_all.deb ... Unpacking x11-common (1:7.7+19) ... Selecting previously unselected package libice6:armhf. Preparing to unpack .../40-libice6_2%3a1.0.9-2_armhf.deb ... Unpacking libice6:armhf (2:1.0.9-2) ... Selecting previously unselected package xorg-sgml-doctools. Preparing to unpack .../41-xorg-sgml-doctools_1%3a1.11-1_all.deb ... Unpacking xorg-sgml-doctools (1:1.11-1) ... Selecting previously unselected package x11proto-dev. Preparing to unpack .../42-x11proto-dev_2018.4-4_all.deb ... Unpacking x11proto-dev (2018.4-4) ... Selecting previously unselected package x11proto-core-dev. Preparing to unpack .../43-x11proto-core-dev_2018.4-4_all.deb ... Unpacking x11proto-core-dev (2018.4-4) ... Selecting previously unselected package libice-dev:armhf. Preparing to unpack .../44-libice-dev_2%3a1.0.9-2_armhf.deb ... Unpacking libice-dev:armhf (2:1.0.9-2) ... Selecting previously unselected package libpthread-stubs0-dev:armhf. Preparing to unpack .../45-libpthread-stubs0-dev_0.4-1_armhf.deb ... Unpacking libpthread-stubs0-dev:armhf (0.4-1) ... Selecting previously unselected package libpthread-stubs0-dev:amd64. Preparing to unpack .../46-libpthread-stubs0-dev_0.4-1_amd64.deb ... Unpacking libpthread-stubs0-dev:amd64 (0.4-1) ... Selecting previously unselected package libuuid1:armhf. Preparing to unpack .../47-libuuid1_2.33.1-0.1_armhf.deb ... Unpacking libuuid1:armhf (2.33.1-0.1) ... Selecting previously unselected package libsm6:armhf. Preparing to unpack .../48-libsm6_2%3a1.2.3-1_armhf.deb ... Unpacking libsm6:armhf (2:1.2.3-1) ... Selecting previously unselected package libsm-dev:armhf. Preparing to unpack .../49-libsm-dev_2%3a1.2.3-1_armhf.deb ... Unpacking libsm-dev:armhf (2:1.2.3-1) ... Selecting previously unselected package libstdc++-8-dev:armhf. Preparing to unpack .../50-libstdc++-8-dev_8.3.0-2_armhf.deb ... Unpacking libstdc++-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package libxau6:amd64. Preparing to unpack .../51-libxau6_1%3a1.0.8-1+b2_amd64.deb ... Unpacking libxau6:amd64 (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:amd64. Preparing to unpack .../52-libxdmcp6_1%3a1.1.2-3_amd64.deb ... Unpacking libxdmcp6:amd64 (1:1.1.2-3) ... Selecting previously unselected package libxcb1:amd64. Preparing to unpack .../53-libxcb1_1.13.1-2_amd64.deb ... Unpacking libxcb1:amd64 (1.13.1-2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../54-libx11-data_2%3a1.6.7-1_all.deb ... Unpacking libx11-data (2:1.6.7-1) ... Selecting previously unselected package libx11-6:amd64. Preparing to unpack .../55-libx11-6_2%3a1.6.7-1_amd64.deb ... Unpacking libx11-6:amd64 (2:1.6.7-1) ... Selecting previously unselected package libxau6:armhf. Preparing to unpack .../56-libxau6_1%3a1.0.8-1+b2_armhf.deb ... Unpacking libxau6:armhf (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:armhf. Preparing to unpack .../57-libxdmcp6_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp6:armhf (1:1.1.2-3) ... Selecting previously unselected package libxcb1:armhf. Preparing to unpack .../58-libxcb1_1.13.1-2_armhf.deb ... Unpacking libxcb1:armhf (1.13.1-2) ... Selecting previously unselected package libx11-6:armhf. Preparing to unpack .../59-libx11-6_2%3a1.6.7-1_armhf.deb ... Unpacking libx11-6:armhf (2:1.6.7-1) ... Selecting previously unselected package libxau-dev:armhf. Preparing to unpack .../60-libxau-dev_1%3a1.0.8-1+b2_armhf.deb ... Unpacking libxau-dev:armhf (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp-dev:armhf. Preparing to unpack .../61-libxdmcp-dev_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp-dev:armhf (1:1.1.2-3) ... Selecting previously unselected package xtrans-dev. Preparing to unpack .../62-xtrans-dev_1.3.5-1_all.deb ... Unpacking xtrans-dev (1.3.5-1) ... Selecting previously unselected package libxcb1-dev:armhf. Preparing to unpack .../63-libxcb1-dev_1.13.1-2_armhf.deb ... Unpacking libxcb1-dev:armhf (1.13.1-2) ... Selecting previously unselected package libx11-dev:armhf. Preparing to unpack .../64-libx11-dev_2%3a1.6.7-1_armhf.deb ... Unpacking libx11-dev:armhf (2:1.6.7-1) ... Selecting previously unselected package libxau-dev:amd64. Preparing to unpack .../65-libxau-dev_1%3a1.0.8-1+b2_amd64.deb ... Unpacking libxau-dev:amd64 (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp-dev:amd64. Preparing to unpack .../66-libxdmcp-dev_1%3a1.1.2-3_amd64.deb ... Unpacking libxdmcp-dev:amd64 (1:1.1.2-3) ... Selecting previously unselected package libxcb1-dev:amd64. Preparing to unpack .../67-libxcb1-dev_1.13.1-2_amd64.deb ... Unpacking libxcb1-dev:amd64 (1.13.1-2) ... Selecting previously unselected package libx11-dev:amd64. Preparing to unpack .../68-libx11-dev_2%3a1.6.7-1_amd64.deb ... Unpacking libx11-dev:amd64 (2:1.6.7-1) ... Selecting previously unselected package libxext6:armhf. Preparing to unpack .../69-libxext6_2%3a1.3.3-1+b2_armhf.deb ... Unpacking libxext6:armhf (2:1.3.3-1+b2) ... Selecting previously unselected package x11proto-xext-dev. Preparing to unpack .../70-x11proto-xext-dev_2018.4-4_all.deb ... Unpacking x11proto-xext-dev (2018.4-4) ... Selecting previously unselected package libxext-dev:armhf. Preparing to unpack .../71-libxext-dev_2%3a1.3.3-1+b2_armhf.deb ... Unpacking libxext-dev:armhf (2:1.3.3-1+b2) ... Selecting previously unselected package libxt6:armhf. Preparing to unpack .../72-libxt6_1%3a1.1.5-1_armhf.deb ... Unpacking libxt6:armhf (1:1.1.5-1) ... Selecting previously unselected package libxt-dev:armhf. Preparing to unpack .../73-libxt-dev_1%3a1.1.5-1_armhf.deb ... Unpacking libxt-dev:armhf (1:1.1.5-1) ... Selecting previously unselected package libxmu6:armhf. Preparing to unpack .../74-libxmu6_2%3a1.1.2-2_armhf.deb ... Unpacking libxmu6:armhf (2:1.1.2-2) ... Selecting previously unselected package libxmu-headers. Preparing to unpack .../75-libxmu-headers_2%3a1.1.2-2_all.deb ... Unpacking libxmu-headers (2:1.1.2-2) ... Selecting previously unselected package libxmu-dev:armhf. Preparing to unpack .../76-libxmu-dev_2%3a1.1.2-2_armhf.deb ... Unpacking libxmu-dev:armhf (2:1.1.2-2) ... Selecting previously unselected package libxpm4:armhf. Preparing to unpack .../77-libxpm4_1%3a3.5.12-1_armhf.deb ... Unpacking libxpm4:armhf (1:3.5.12-1) ... Selecting previously unselected package libxpm-dev:armhf. Preparing to unpack .../78-libxpm-dev_1%3a3.5.12-1_armhf.deb ... Unpacking libxpm-dev:armhf (1:3.5.12-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy:armhf. Preparing to unpack .../79-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up libxau6:amd64 (1:1.0.8-1+b2) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-1) ... No schema files found: doing nothing. Setting up x11-common (1:7.7+19) ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults invoke-rc.d: could not determine current runlevel All runlevel operations denied by policy invoke-rc.d: policy-rc.d denied execution of start. Setting up linux-libc-dev:armhf (4.19.20-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up libpthread-stubs0-dev:amd64 (0.4-1) ... Setting up libpthread-stubs0-dev:armhf (0.4-1) ... Setting up xtrans-dev (1.3.5-1) ... Setting up autotools-dev (20180224.1) ... Setting up libx11-data (2:1.6.7-1) ... Setting up libncurses6:amd64 (6.1+20181013-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up gcc-8-base:armhf (8.3.0-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libcroco3:amd64 (0.6.12-3) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up xorg-sgml-doctools (1:1.11-1) ... Setting up libbsd0:amd64 (0.9.1-2) ... Setting up libelf1:amd64 (0.176-1) ... Setting up x11proto-dev (2018.4-4) ... Setting up libfile-stripnondeterminism-perl (1.1.1-1) ... Setting up libxdmcp6:amd64 (1:1.1.2-3) ... Setting up libxcb1:amd64 (1.13.1-2) ... Setting up gettext (0.19.8.1-9) ... Setting up libxau-dev:amd64 (1:1.0.8-1+b2) ... Setting up libtool (2.4.6-10) ... Setting up m4 (1.4.18-2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libxdmcp-dev:amd64 (1:1.1.2-3) ... Setting up x11proto-core-dev (2018.4-4) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up autoconf (2.69-11) ... Setting up x11proto-xext-dev (2018.4-4) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libx11-6:amd64 (2:1.6.7-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libxcb1-dev:amd64 (1.13.1-2) ... Setting up po-debconf (1.0.21) ... Setting up libx11-dev:amd64 (2:1.6.7-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libxmu-headers (2:1.1.2-2) ... Setting up libc6:armhf (2.28-8) ... Setting up libc6-dev:armhf (2.28-8) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libice6:armhf (2:1.0.9-2) ... Setting up libxau6:armhf (1:1.0.8-1+b2) ... Setting up libxdmcp6:armhf (1:1.1.2-3) ... Setting up libxcb1:armhf (1.13.1-2) ... Setting up libxau-dev:armhf (1:1.0.8-1+b2) ... Setting up libice-dev:armhf (2:1.0.9-2) ... Setting up libgcc1:armhf (1:8.3.0-2) ... Setting up debhelper (12.1.1) ... Setting up libgomp1:armhf (8.3.0-2) ... Setting up dh-autoreconf (19) ... Setting up libxdmcp-dev:armhf (1:1.1.2-3) ... Setting up libatomic1:armhf (8.3.0-2) ... Setting up libuuid1:armhf (2.33.1-0.1) ... Setting up dh-strip-nondeterminism (1.1.1-1) ... Setting up libx11-6:armhf (2:1.6.7-1) ... Setting up libsm6:armhf (2:1.2.3-1) ... Setting up libstdc++6:armhf (8.3.0-2) ... Setting up libxcb1-dev:armhf (1.13.1-2) ... Setting up libxpm4:armhf (1:3.5.12-1) ... Setting up libsm-dev:armhf (2:1.2.3-1) ... Setting up libx11-dev:armhf (2:1.6.7-1) ... Setting up libxext6:armhf (2:1.3.3-1+b2) ... Setting up libasan5:armhf (8.3.0-2) ... Setting up libxpm-dev:armhf (1:3.5.12-1) ... Setting up libxt6:armhf (1:1.1.5-1) ... Setting up libxext-dev:armhf (2:1.3.3-1+b2) ... Setting up libubsan1:armhf (8.3.0-2) ... Setting up libxmu6:armhf (2:1.1.2-2) ... Setting up libxt-dev:armhf (1:1.1.5-1) ... Setting up libgcc-8-dev:armhf (8.3.0-2) ... Setting up libstdc++-8-dev:armhf (8.3.0-2) ... Setting up libxmu-dev:armhf (2:1.1.2-2) ... Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Processing triggers for libc-bin (2.28-8) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Initial Foreign Architectures: armhf Arch check ok (armhf included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64) Toolchain package versions: binutils_2.31.1-15 dpkg-dev_1.19.5 g++-8_8.3.0-2 gcc-8_8.3.0-2 libc6-dev_2.28-8 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.3.0-2cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.3.0-2cross1 linux-libc-dev_4.19.20-1 Package versions: adduser_3.118 apt_1.8.0~rc4 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.1 base-passwd_3.5.46 bash_5.0-2 binutils_2.31.1-15 binutils-arm-linux-gnueabihf_2.31.1-15 binutils-common_2.31.1-15 binutils-x86-64-linux-gnu_2.31.1-15 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.6 bzip2_1.0.6-9 ca-certificates_20190110 ccache_3.6-1 coreutils_8.30-3 cpp_4:8.3.0-1 cpp-8_8.3.0-2 cpp-8-arm-linux-gnueabihf_8.3.0-2cross1 cpp-arm-linux-gnueabihf_4:8.3.0-1 cross-config_2.6.15-2 crossbuild-essential-armhf_12.6 dash_0.5.10.2-5 debconf_1.5.71 debhelper_12.1.1 debian-archive-keyring_2018.1 debianutils_4.8.6.1 dh-autoreconf_19 dh-strip-nondeterminism_1.1.1-1 diffutils_1:3.7-2 dirmngr_2.2.13-1 dpkg_1.19.5 dpkg-cross_2.6.15-2 dpkg-dev_1.19.5 dwz_0.12-3 e2fsprogs_1.45.0-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-4 findutils_4.6.0+git+20190209-2 g++_4:8.3.0-1 g++-8_8.3.0-2 g++-8-arm-linux-gnueabihf_8.3.0-2cross1 g++-arm-linux-gnueabihf_4:8.3.0-1 gcc_4:8.3.0-1 gcc-8_8.3.0-2 gcc-8-arm-linux-gnueabihf_8.3.0-2cross1 gcc-8-arm-linux-gnueabihf-base_8.3.0-2cross1 gcc-8-base_8.3.0-2 gcc-8-cross-base_8.3.0-2cross1 gcc-arm-linux-gnueabihf_4:8.3.0-1 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.13-1 gnupg-l10n_2.2.13-1 gnupg-utils_2.2.13-1 gpg_2.2.13-1 gpg-agent_2.2.13-1 gpg-wks-client_2.2.13-1 gpg-wks-server_2.2.13-1 gpgconf_2.2.13-1 gpgsm_2.2.13-1 gpgv_2.2.13-1 grep_3.3-1 groff-base_1.22.4-3 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-4 libapt-pkg5.0_1.8.0~rc4 libarchive-zip-perl_1.64-1 libasan5_8.3.0-2 libasan5-armhf-cross_8.3.0-2cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-2 libatomic1-armhf-cross_8.3.0-2cross1 libattr1_1:2.4.48-4 libaudit-common_1:2.8.4-2 libaudit1_1:2.8.4-2 libauthen-sasl-perl_2.1600-1 libbinutils_2.31.1-15 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9 libc-bin_2.28-8 libc-dev-bin_2.28-8 libc6_2.28-8 libc6-armhf-cross_2.28-7cross1 libc6-dev_2.28-8 libc6-dev-armhf-cross_2.28-7cross1 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-2 libcom-err2_1.45.0-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libdata-dump-perl_1.23-1 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.248 libdebian-dpkgcross-perl_2.6.15-2 libdpkg-perl_1.19.5 libeatmydata1_105-7 libelf1_0.176-1 libencode-locale-perl_1.05-1 libexpat1_2.2.6-1 libext2fs2_1.45.0-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-listing-perl_6.04-1 libfile-stripnondeterminism-perl_1.1.1-1 libfile-which-perl_1.23-1 libfont-afm-perl_1.20-2 libgcc-8-dev_8.3.0-2 libgcc-8-dev-armhf-cross_8.3.0-2cross1 libgcc1_1:8.3.0-2 libgcc1-armhf-cross_1:8.3.0-2cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-3 libgdbm6_1.18.1-3 libglib2.0-0_2.58.3-1 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.6-2 libgomp1_8.3.0-2 libgomp1-armhf-cross_8.3.0-2cross1 libgpg-error0_1.35-1 libhogweed4_3.4.1-1 libhtml-form-perl_6.03-1 libhtml-format-perl_2.12-1 libhtml-parser-perl_3.72-3+b3 libhtml-tagset-perl_3.20-3 libhtml-tree-perl_5.07-2 libhttp-cookies-perl_6.04-1 libhttp-daemon-perl_6.01-3 libhttp-date-perl_6.02-1 libhttp-message-perl_6.18-1 libhttp-negotiate-perl_6.01-1 libice-dev_2:1.0.9-2 libice6_2:1.0.9-2 libicu63_63.1-6 libidn2-0_2.0.5-1 libio-html-perl_1.001-1 libio-socket-ssl-perl_2.060-3 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_8.3.0-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-2 liblwp-mediatypes-perl_6.02-1 liblwp-protocol-https-perl_6.07-2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-4 libmagic1_1:5.35-4 libmailtools-perl_2.18-1 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libmpx2_8.3.0-2 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnet-http-perl_6.18-1 libnet-smtp-ssl-perl_1.04-1 libnet-ssleay-perl_1.85-2+b1 libnettle6_3.4.1-1 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre3_2:8.39-11 libperl5.28_5.28.1-4 libpipeline1_1.5.1-2 libpthread-stubs0-dev_0.4-1 libquadmath0_8.3.0-2 libreadline7_7.0-5 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsigsegv2_2.12-2 libsm-dev_2:1.2.3-1 libsm6_2:1.2.3-1 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-1 libss2_1.45.0-1 libssl1.1_1.1.1b-1 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.3.0-2cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.3.0-2cross1 libsystemd0_241-1 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtry-tiny-perl_0.30-1 libtsan0_8.3.0-2 libubsan1_8.3.0-2 libubsan1-armhf-cross_8.3.0-2cross1 libuchardet0_0.0.6-3 libudev1_241-1 libunistring2_0.9.10-1 liburi-perl_1.76-1 libuuid1_2.33.1-0.1 libwww-perl_6.36-1 libwww-robotrules-perl_6.02-1 libx11-6_2:1.6.7-1 libx11-data_2:1.6.7-1 libx11-dev_2:1.6.7-1 libxau-dev_1:1.0.8-1+b2 libxau6_1:1.0.8-1+b2 libxcb1_1.13.1-2 libxcb1-dev_1.13.1-2 libxdmcp-dev_1:1.1.2-3 libxdmcp6_1:1.1.2-3 libxext-dev_2:1.3.3-1+b2 libxext6_2:1.3.3-1+b2 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-parser-perl_2.44-4 libxml-sax-base-perl_1.09-1 libxml-sax-expat-perl_0.51-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libxmu-dev_2:1.1.2-2 libxmu-headers_2:1.1.2-2 libxmu6_2:1.1.2-2 libxpm-dev_1:3.5.12-1 libxpm4_1:3.5.12-1 libxt-dev_1:1.1.5-1 libxt6_1:1.1.5-1 libyaml-0-2_0.2.1-1 libyaml-libyaml-perl_0.76+repack-1 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.20-1 linux-libc-dev-armhf-cross_4.19.20-1cross1 login_1:4.5-1.1 lsb-base_10.2018112800 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mawk_1.3.3-17+b3 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 netbase_5.6 openssl_1.1.1b-1 passwd_1:4.5-1.1 patch_2.7.6-3 perl_5.28.1-4 perl-base_5.28.1-4 perl-modules-5.28_5.28.1-4 perl-openssl-defaults_3 pinentry-curses_1.1.0-1+b1 po-debconf_1.0.21 readline-common_7.0-5 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-5 tzdata_2018i-2 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-runtime_2.33.1-0.1 x11-common_1:7.7+19 x11proto-core-dev_2018.4-4 x11proto-dev_2018.4-4 x11proto-xext-dev_2018.4-4 xorg-sgml-doctools_1:1.11-1 xtrans-dev_1.3.5-1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: wmcpuload Binary: wmcpuload Architecture: any Version: 1.1.1-2 Maintainer: Andreas Metzler Homepage: https://www.dockapps.net/wmcpuload Standards-Version: 4.2.1 Build-Depends: debhelper (>= 11), libx11-dev, libxext-dev, libxmu-dev, libxpm-dev Package-List: wmcpuload deb x11 optional arch=any Checksums-Sha1: be6bd35f4d2b85280e9fa2a698d6f806a093b580 167751 wmcpuload_1.1.1.orig.tar.gz 35c1996ad6e771ba29a11172dc72ddbb28e78adf 4648 wmcpuload_1.1.1-2.debian.tar.xz Checksums-Sha256: 8f08b2b937db105b677a9e4df2a67259d2580071e28456c0e6cd77db15f0648c 167751 wmcpuload_1.1.1.orig.tar.gz b172ce25f5632c0b68998b337f579eba8b46bb83bc2045ff542f6061f1e8cb8a 4648 wmcpuload_1.1.1-2.debian.tar.xz Files: d8ab044256c7a1ee86fd31b566aa36b9 167751 wmcpuload_1.1.1.orig.tar.gz 7462a6f8b08f420962f8027d59ff8a32 4648 wmcpuload_1.1.1-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEE0uCSA5741Jbt9PpepU8BhUOCFIQFAlvxPKoACgkQpU8BhUOC FISIag//ai4DhEtlW/cAG+GSNUEnvq9mUIxNLItmC2gXSio71xXAIdcGJ6dXyMqQ lW4j0UASEMOLKE0xeauwu96JCX5rogkN3Hfn5wErTYnOVzA0wcDIPPg/RkGsIPL1 gciuNlkVLMROhaP3XQFPdFaGBrX2cyjurc4lhj04NhYV+4QVCAgklopY0Gd6n0o7 EbPYrPkfaQMONun0+t9M44/OADpMEofkHfikily3pTMGN7HeUz1bGhzZcDdktXRl uHP7styVyOd1TUJLDKCItxLMAsE9XF8mOFnsQkjTcZmC6Xtofe/2xGZv2WcVMTOi bGfKjJ+2ixFZYjmcgy4+RkOT7YmpRfgsgnjB7DU7Pyex+sIdGYFyu6vU70GsI+Oc 5xyZQXfrJLHMvr9Gv4OShnsRda8fqSCHzMoBk/DJry4c2cVjEsxA2EEF823FAHaB KiOxy78JeettCQU99a8HVgxEUOLk0MqjZe4gS+LmdrzV+YczMXg8lerJFHjqJhn8 MClFrjsC3e0ruMBCKAdQUVzNz5RsfRdD1xO0t70PVzh/TUuBeokHdKAbgDFyLrWz M47HyGufwhASnSuNZF+fDqeRXyh8/FbiAlXBFPLeJNn9pIRljOmmL2DD0SSxIc95 bCwcg+yV39axRLTbrv/yb1pUz9T9jPRfy79aE3OMZ6JbRBXVgPw= =80NW -----END PGP SIGNATURE----- gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sun Nov 18 10:19:22 2018 UTC gpgv: using RSA key D2E092039EF8D496EDF4FA5EA54F018543821484 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./wmcpuload_1.1.1-2.dsc dpkg-source: info: extracting wmcpuload in /<> dpkg-source: info: unpacking wmcpuload_1.1.1.orig.tar.gz dpkg-source: info: unpacking wmcpuload_1.1.1-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01_kfreebsd.diff Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf CCACHE_COMPRESS=1 CCACHE_DIR=/var/cache/ccache-sbuild CCACHE_UMASK=002 CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf DEB_BUILD_OPTIONS=nocheck HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=build PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=1000 SCHROOT_GROUP=build SCHROOT_SESSION_ID=unstable-amd64-sbuild-134dacaa-563a-4271-9da4-9c9ff8537779 SCHROOT_UID=1000 SCHROOT_USER=build SHELL=/bin/sh USER=build dpkg-buildpackage ----------------- Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16 dpkg-buildpackage: info: source package wmcpuload dpkg-buildpackage: info: source version 1.1.1-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Metzler dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary-arch dh binary-arch dh_update_autotools_config -a dh_autoreconf -a dh_auto_configure -a ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --host=arm-linux-gnueabihf configure: WARNING: unrecognized options: --disable-maintainer-mode configure: loading site script /etc/dpkg-cross/cross-config.armhf checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnueabihf checking target system type... arm-unknown-linux-gnueabihf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-gnueabihf-strip... arm-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gawk... (cached) mawk checking for arm-linux-gnueabihf-gcc... arm-linux-gnueabihf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-linux-gnueabihf-gcc accepts -g... yes checking for arm-linux-gnueabihf-gcc option to accept ISO C89... none needed checking whether arm-linux-gnueabihf-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of arm-linux-gnueabihf-gcc... none checking whether ln -s works... yes checking how to run the C preprocessor... arm-linux-gnueabihf-gcc -E checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for XShapeCombineMask in -lXext... yes checking for XpmCreatePixmapFromData in -lXpm... yes checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for memory.h... (cached) yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... (cached) yes checking for select... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating libdockapp/Makefile config.status: creating doc/Makefile config.status: creating icons/Makefile config.status: creating contrib/Makefile config.status: creating contrib/wmcpuload.spec config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-maintainer-mode dh_auto_build -a make -j16 make[1]: Entering directory '/<>' make all-recursive make[2]: Entering directory '/<>' Making all in src make[3]: Entering directory '/<>/src' Makefile:431: target '.deps/cpu_linux.Po' given more than once in the same rule arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -I../libdockapp/ -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o cpu_linux.o cpu_linux.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -I../libdockapp/ -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o main.o main.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -I../libdockapp/ -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o ../libdockapp/dockapp.o ../libdockapp/dockapp.c cpu_linux.c: In function ‘cpu_get_usage’: cpu_linux.c:90:4: warning: ignoring return value of ‘fscanf’, declared with attribute warn_unused_result [-Wunused-result] fscanf(fp, "%*s %llu %llu %llu %llu %llu %llu %llu", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ &user, &nice, &system, &idle, &iowait, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ &irq, &softirq); ~~~~~~~~~~~~~~~ cpu_linux.c:94:4: warning: ignoring return value of ‘fscanf’, declared with attribute warn_unused_result [-Wunused-result] fscanf(fp, "%*s %llu %llu %llu %llu", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ &user, &nice, &system, &idle); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cpu_linux.c:104:4: warning: ignoring return value of ‘fscanf’, declared with attribute warn_unused_result [-Wunused-result] fscanf(fp, "%s %llu %llu %llu %llu %llu %llu %llu", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cpu_name, &user, &nice, &system, &idle, &iowait, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ &irq, &softirq); ~~~~~~~~~~~~~~~ cpu_linux.c:108:4: warning: ignoring return value of ‘fscanf’, declared with attribute warn_unused_result [-Wunused-result] fscanf(fp, "%s %llu %llu %llu %llu", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cpu_name, &user, &nice, &system, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ &idle); ~~~~~~ ../libdockapp/dockapp.c: In function ‘dockapp_open_window’: ../libdockapp/dockapp.c:50:16: warning: variable ‘stat’ set but not used [-Wunused-but-set-variable] Status stat; ^~~~ arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -I../libdockapp/ -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wl,-z,relro -Wl,-z,now -o wmcpuload cpu_linux.o main.o ../libdockapp/dockapp.o -lX11 -lXext -lXpm make[3]: Leaving directory '/<>/src' Making all in libdockapp make[3]: Entering directory '/<>/libdockapp' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/<>/libdockapp' Making all in icons make[3]: Entering directory '/<>/icons' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/<>/icons' Making all in contrib make[3]: Entering directory '/<>/contrib' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/<>/contrib' Making all in doc make[3]: Entering directory '/<>/doc' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/<>/doc' make[3]: Entering directory '/<>' make[3]: Leaving directory '/<>' make[2]: Leaving directory '/<>' make[1]: Leaving directory '/<>' dh_auto_test -a create-stamp debian/debhelper-build-stamp dh_testroot -a dh_prep -a dh_auto_install -a make -j16 install DESTDIR=/<>/debian/wmcpuload AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/<>' Making install in src make[2]: Entering directory '/<>/src' Makefile:431: target '.deps/cpu_linux.Po' given more than once in the same rule make[3]: Entering directory '/<>/src' Makefile:431: target '.deps/cpu_linux.Po' given more than once in the same rule make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/<>/debian/wmcpuload/usr/bin' /usr/bin/install -c wmcpuload '/<>/debian/wmcpuload/usr/bin' make[3]: Leaving directory '/<>/src' make[2]: Leaving directory '/<>/src' Making install in libdockapp make[2]: Entering directory '/<>/libdockapp' make[3]: Entering directory '/<>/libdockapp' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/<>/libdockapp' make[2]: Leaving directory '/<>/libdockapp' Making install in icons make[2]: Entering directory '/<>/icons' make[3]: Entering directory '/<>/icons' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/<>/icons' make[2]: Leaving directory '/<>/icons' Making install in contrib make[2]: Entering directory '/<>/contrib' make[3]: Entering directory '/<>/contrib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/<>/contrib' make[2]: Leaving directory '/<>/contrib' Making install in doc make[2]: Entering directory '/<>/doc' make[3]: Entering directory '/<>/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/<>/debian/wmcpuload/usr/share/man/man1' /usr/bin/install -c -m 644 wmcpuload.1 '/<>/debian/wmcpuload/usr/share/man/man1' make[3]: Leaving directory '/<>/doc' make[2]: Leaving directory '/<>/doc' make[2]: Entering directory '/<>' make[3]: Entering directory '/<>' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/<>' make[2]: Leaving directory '/<>' make[1]: Leaving directory '/<>' dh_install -a dh_installdocs -a dh_installchangelogs -a dh_installman -a dh_installmenu -a dh_icons -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a dpkg-deb: building package 'wmcpuload' in '../wmcpuload_1.1.1-2_armhf.deb'. dpkg-deb: building package 'wmcpuload-dbgsym' in '../wmcpuload-dbgsym_1.1.1-2_armhf.deb'. dpkg-genbuildinfo --build=any dpkg-genchanges --build=any >../wmcpuload_1.1.1-2_armhf.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2019-03-07T11:59:45Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ wmcpuload_1.1.1-2_armhf.changes: -------------------------------- Format: 1.8 Date: Sun, 18 Nov 2018 11:17:36 +0100 Source: wmcpuload Binary: wmcpuload wmcpuload-dbgsym Built-For-Profiles: cross nocheck Architecture: armhf Version: 1.1.1-2 Distribution: unstable-amd64-sbuild Urgency: low Maintainer: Andreas Metzler Changed-By: Andreas Metzler Description: wmcpuload - Dockapp that displays the current CPU usage Changes: wmcpuload (1.1.1-2) unstable; urgency=low . * Use https URLs. * [lintian] Delete trailing whitespace in control and changelog. * Use DH v11 compat. * Set Rules-Requires-Root: no. * Run "wrap-and-sort --max-line-length=72 --short-indent". * copyright: Update Dep5 Format URL and Upstream-Contact. * Fix homepage URL. Checksums-Sha1: 7dbd450e39fbdf454bd4208656a0c6d8c85a6dd5 28820 wmcpuload-dbgsym_1.1.1-2_armhf.deb 64874132287af26d541017b7ed42dea79dd620b9 5314 wmcpuload_1.1.1-2_armhf.buildinfo c4d1c4e820e2bbcee7ed36f3f2afc3e58a36b907 24140 wmcpuload_1.1.1-2_armhf.deb Checksums-Sha256: ac6be0e12ba3d8a322e99e1238398ea2185da9dfdeca533f29e9a5983db4f5c9 28820 wmcpuload-dbgsym_1.1.1-2_armhf.deb 81c5cb171fa5f566f23d2c8ae77f36894eb02da3f701c05ff54c97054c066262 5314 wmcpuload_1.1.1-2_armhf.buildinfo a98d432d977d0907100649d1d18d725bd4564181f19bbf7db30fbb688519d2ef 24140 wmcpuload_1.1.1-2_armhf.deb Files: 9bd2ca3c3252be0f416c0f05e42db4e5 28820 debug optional wmcpuload-dbgsym_1.1.1-2_armhf.deb 0588c218eab85cef7a204231e2b2a077 5314 x11 optional wmcpuload_1.1.1-2_armhf.buildinfo 69970d0e8941cb67d5a7d53270367dfc 24140 x11 optional wmcpuload_1.1.1-2_armhf.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: wmcpuload Binary: wmcpuload Architecture: armhf Version: 1.1.1-2 Checksums-Md5: 9bd2ca3c3252be0f416c0f05e42db4e5 28820 wmcpuload-dbgsym_1.1.1-2_armhf.deb 69970d0e8941cb67d5a7d53270367dfc 24140 wmcpuload_1.1.1-2_armhf.deb Checksums-Sha1: 7dbd450e39fbdf454bd4208656a0c6d8c85a6dd5 28820 wmcpuload-dbgsym_1.1.1-2_armhf.deb c4d1c4e820e2bbcee7ed36f3f2afc3e58a36b907 24140 wmcpuload_1.1.1-2_armhf.deb Checksums-Sha256: ac6be0e12ba3d8a322e99e1238398ea2185da9dfdeca533f29e9a5983db4f5c9 28820 wmcpuload-dbgsym_1.1.1-2_armhf.deb a98d432d977d0907100649d1d18d725bd4564181f19bbf7db30fbb688519d2ef 24140 wmcpuload_1.1.1-2_armhf.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Thu, 07 Mar 2019 11:59:44 +0000 Build-Path: /<> Installed-Build-Depends: autoconf (= 2.69-11), automake (= 1:1.16.1-4), autopoint (= 0.19.8.1-9), autotools-dev (= 20180224.1), base-files (= 10.1), base-passwd (= 3.5.46), bash (= 5.0-2), binutils (= 2.31.1-15), binutils-common (= 2.31.1-15), binutils-x86-64-linux-gnu (= 2.31.1-15), bsdmainutils (= 11.1.2+b1), bsdutils (= 1:2.33.1-0.1), build-essential (= 12.6), bzip2 (= 1.0.6-9), coreutils (= 8.30-3), cpp (= 4:8.3.0-1), cpp-8 (= 8.3.0-2), dash (= 0.5.10.2-5), debconf (= 1.5.71), debhelper (= 12.1.1), debianutils (= 4.8.6.1), dh-autoreconf (= 19), dh-strip-nondeterminism (= 1.1.1-1), diffutils (= 1:3.7-2), dpkg (= 1.19.5), dpkg-dev (= 1.19.5), dwz (= 0.12-3), fdisk (= 2.33.1-0.1), file (= 1:5.35-4), findutils (= 4.6.0+git+20190209-2), g++ (= 4:8.3.0-1), g++-8 (= 8.3.0-2), gcc (= 4:8.3.0-1), gcc-8 (= 8.3.0-2), gcc-8-base (= 8.3.0-2), gettext (= 0.19.8.1-9), gettext-base (= 0.19.8.1-9), grep (= 3.3-1), groff-base (= 1.22.4-3), gzip (= 1.9-3), hostname (= 3.21), init-system-helpers (= 1.56+nmu1), intltool-debian (= 0.35.0+20060710.5), libacl1 (= 2.2.53-4), libarchive-zip-perl (= 1.64-1), libasan5 (= 8.3.0-2), libatomic1 (= 8.3.0-2), libattr1 (= 1:2.4.48-4), libaudit-common (= 1:2.8.4-2), libaudit1 (= 1:2.8.4-2), libbinutils (= 2.31.1-15), libblkid1 (= 2.33.1-0.1), libbsd0 (= 0.9.1-2), libbz2-1.0 (= 1.0.6-9), libc-bin (= 2.28-8), libc-dev-bin (= 2.28-8), libc6 (= 2.28-8), libc6-dev (= 2.28-8), libcap-ng0 (= 0.7.9-2), libcc1-0 (= 8.3.0-2), libcroco3 (= 0.6.12-3), libdb5.3 (= 5.3.28+dfsg1-0.5), libdebconfclient0 (= 0.248), libdpkg-perl (= 1.19.5), libelf1 (= 0.176-1), libfdisk1 (= 2.33.1-0.1), libffi6 (= 3.2.1-9), libfile-stripnondeterminism-perl (= 1.1.1-1), libgcc-8-dev (= 8.3.0-2), libgcc1 (= 1:8.3.0-2), libgcrypt20 (= 1.8.4-5), libgdbm-compat4 (= 1.18.1-3), libgdbm6 (= 1.18.1-3), libglib2.0-0 (= 2.58.3-1), libgmp10 (= 2:6.1.2+dfsg-4), libgomp1 (= 8.3.0-2), libgpg-error0 (= 1.35-1), libice-dev (= 2:1.0.9-2), libice6 (= 2:1.0.9-2), libicu63 (= 63.1-6), libisl19 (= 0.20-2), libitm1 (= 8.3.0-2), liblsan0 (= 8.3.0-2), liblz4-1 (= 1.8.3-1), liblzma5 (= 5.2.4-1), libmagic-mgc (= 1:5.35-4), libmagic1 (= 1:5.35-4), libmount1 (= 2.33.1-0.1), libmpc3 (= 1.1.0-1), libmpfr6 (= 4.0.2-1), libmpx2 (= 8.3.0-2), libncurses6 (= 6.1+20181013-2), libncursesw6 (= 6.1+20181013-2), libpam-modules (= 1.3.1-5), libpam-modules-bin (= 1.3.1-5), libpam-runtime (= 1.3.1-5), libpam0g (= 1.3.1-5), libpcre3 (= 2:8.39-11), libperl5.28 (= 5.28.1-4), libpipeline1 (= 1.5.1-2), libpthread-stubs0-dev (= 0.4-1), libquadmath0 (= 8.3.0-2), libseccomp2 (= 2.3.3-4), libselinux1 (= 2.8-1+b1), libsigsegv2 (= 2.12-2), libsm-dev (= 2:1.2.3-1), libsm6 (= 2:1.2.3-1), libsmartcols1 (= 2.33.1-0.1), libstdc++-8-dev (= 8.3.0-2), libstdc++6 (= 8.3.0-2), libsystemd0 (= 241-1), libtinfo6 (= 6.1+20181013-2), libtool (= 2.4.6-10), libtsan0 (= 8.3.0-2), libubsan1 (= 8.3.0-2), libuchardet0 (= 0.0.6-3), libudev1 (= 241-1), libunistring2 (= 0.9.10-1), libuuid1 (= 2.33.1-0.1), libx11-6 (= 2:1.6.7-1), libx11-data (= 2:1.6.7-1), libx11-dev (= 2:1.6.7-1), libxau-dev (= 1:1.0.8-1+b2), libxau6 (= 1:1.0.8-1+b2), libxcb1 (= 1.13.1-2), libxcb1-dev (= 1.13.1-2), libxdmcp-dev (= 1:1.1.2-3), libxdmcp6 (= 1:1.1.2-3), libxext-dev (= 2:1.3.3-1+b2), libxext6 (= 2:1.3.3-1+b2), libxml2 (= 2.9.4+dfsg1-7+b3), libxmu-dev (= 2:1.1.2-2), libxmu-headers (= 2:1.1.2-2), libxmu6 (= 2:1.1.2-2), libxpm-dev (= 1:3.5.12-1), libxpm4 (= 1:3.5.12-1), libxt-dev (= 1:1.1.5-1), libxt6 (= 1:1.1.5-1), linux-libc-dev (= 4.19.20-1), login (= 1:4.5-1.1), lsb-base (= 10.2018112800), m4 (= 1.4.18-2), make (= 4.2.1-1.2), man-db (= 2.8.5-2), mawk (= 1.3.3-17+b3), ncurses-base (= 6.1+20181013-2), ncurses-bin (= 6.1+20181013-2), patch (= 2.7.6-3), perl (= 5.28.1-4), perl-base (= 5.28.1-4), perl-modules-5.28 (= 5.28.1-4), po-debconf (= 1.0.21), sed (= 4.7-1), sensible-utils (= 0.0.12), sysvinit-utils (= 2.93-8), tar (= 1.30+dfsg-5), util-linux (= 2.33.1-0.1), x11-common (= 1:7.7+19), x11proto-core-dev (= 2018.4-4), x11proto-dev (= 2018.4-4), x11proto-xext-dev (= 2018.4-4), xorg-sgml-doctools (= 1:1.11-1), xtrans-dev (= 1.3.5-1), xz-utils (= 5.2.4-1), zlib1g (= 1:1.2.11.dfsg-1) Environment: DEB_BUILD_OPTIONS="nocheck parallel=16" DEB_BUILD_PROFILES="cross nocheck" LANG="en_US.UTF-8" LC_ALL="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" MAKEFLAGS=" -j16" SOURCE_DATE_EPOCH="1542536256" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ wmcpuload-dbgsym_1.1.1-2_armhf.deb ---------------------------------- new Debian package, version 2.0. size 28820 bytes: control archive=512 bytes. 342 bytes, 12 lines control 106 bytes, 1 lines md5sums Package: wmcpuload-dbgsym Source: wmcpuload Version: 1.1.1-2 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Andreas Metzler Installed-Size: 44 Depends: wmcpuload (= 1.1.1-2) Section: debug Priority: optional Description: debug symbols for wmcpuload Build-Ids: 3bbea805f7f0735e74e24146507da9e2915b1f36 drwxr-xr-x root/root 0 2018-11-18 10:17 ./ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/lib/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/lib/debug/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/lib/debug/.build-id/3b/ -rw-r--r-- root/root 34596 2018-11-18 10:17 ./usr/lib/debug/.build-id/3b/bea805f7f0735e74e24146507da9e2915b1f36.debug drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/doc/ lrwxrwxrwx root/root 0 2018-11-18 10:17 ./usr/share/doc/wmcpuload-dbgsym -> wmcpuload wmcpuload_1.1.1-2_armhf.deb --------------------------- new Debian package, version 2.0. size 24140 bytes: control archive=1372 bytes. 663 bytes, 16 lines control 934 bytes, 14 lines md5sums 584 bytes, 14 lines * postinst #!/bin/sh 427 bytes, 10 lines * postrm #!/bin/sh Package: wmcpuload Version: 1.1.1-2 Architecture: armhf Maintainer: Andreas Metzler Installed-Size: 70 Depends: libc6 (>= 2.15), libx11-6, libxext6, libxpm4 Section: x11 Priority: optional Homepage: https://www.dockapps.net/wmcpuload Description: Dockapp that displays the current CPU usage WMCPULoad is a dockapp for X window managers such as WindowMaker, AfterStep, BlackBox and Enlightenment. It displays the current CPU usage as percentage value and chart with an LCD-like look. Its appearance can be configured from the commandline and it has a backlight mode which can be triggered manually or by an adjustable alarm percentage. drwxr-xr-x root/root 0 2018-11-18 10:17 ./ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/bin/ -rwxr-xr-x root/root 26824 2018-11-18 10:17 ./usr/bin/wmcpuload drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/doc/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/doc/wmcpuload/ -rw-r--r-- root/root 332 2016-10-20 13:55 ./usr/share/doc/wmcpuload/AUTHORS -rw-r--r-- root/root 298 2016-10-20 13:55 ./usr/share/doc/wmcpuload/NEWS.gz -rw-r--r-- root/root 2132 2016-10-20 13:55 ./usr/share/doc/wmcpuload/README.gz -rw-r--r-- root/root 407 2016-10-20 13:42 ./usr/share/doc/wmcpuload/THANKS -rw-r--r-- root/root 146 2016-10-20 13:55 ./usr/share/doc/wmcpuload/TODO -rw-r--r-- root/root 2176 2018-11-18 10:17 ./usr/share/doc/wmcpuload/changelog.Debian.gz -rw-r--r-- root/root 2979 2016-10-20 14:09 ./usr/share/doc/wmcpuload/changelog.gz -rw-r--r-- root/root 2614 2018-11-18 10:17 ./usr/share/doc/wmcpuload/copyright drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/icons/ -rw-r--r-- root/root 456 2016-10-20 13:42 ./usr/share/icons/wmcpuload-16x16.xpm -rw-r--r-- root/root 2294 2016-10-20 13:42 ./usr/share/icons/wmcpuload-32x32.xpm -rw-r--r-- root/root 6511 2016-10-20 13:42 ./usr/share/icons/wmcpuload-48x48.xpm drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/man/ drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/man/man1/ -rw-r--r-- root/root 1455 2018-11-18 10:17 ./usr/share/man/man1/wmcpuload.1.gz drwxr-xr-x root/root 0 2018-11-18 10:17 ./usr/share/menu/ -rw-r--r-- root/root 123 2012-07-15 06:54 ./usr/share/menu/wmcpuload lintian ------- Setup apt archive ----------------- Merged Build-Depends: lintian:amd64 Filtered Build-Depends: lintian:amd64 dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<>/apt_archive/sbuild-build-depends-lintian-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [963 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [545 B] Get:5 copy:/<>/apt_archive ./ Packages [629 B] Fetched 2137 B in 0s (172 kB/s) Reading package lists... Reading package lists... Install lintian build dependencies (apt-based resolver) ------------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils t1utils Suggested packages: libhtml-template-perl binutils-multiarch libtext-template-perl Recommended packages: libcgi-fast-perl libasync-mergepoint-perl libsereal-perl libtest-fatal-perl libtest-refcount-perl libdigest-bubblebabble-perl libnet-dns-sec-perl libnet-libidn-perl libunicode-utf8-perl libperlio-gzip-perl The following NEW packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils sbuild-build-depends-lintian-dummy:armhf t1utils 0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded. Need to get 2847 kB/2971 kB of archives. After this operation, 9356 kB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [844 B] Get:2 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libapt-pkg-perl amd64 0.1.34+b1 [71.2 kB] Get:3 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB] Get:4 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libcgi-pm-perl all 4.40-1 [222 kB] Get:5 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB] Get:6 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB] Get:7 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB] Get:8 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB] Get:9 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB] Get:10 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-dns-perl all 1.19-1 [372 kB] Get:11 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB] Get:12 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB] Get:13 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB] Get:14 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB] Get:15 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB] Get:16 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libfuture-perl all 0.39-1 [74.5 kB] Get:17 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB] Get:18 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libio-async-perl all 0.72-1 [262 kB] Get:19 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB] Get:20 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libipc-run-perl all 20180523.0-1 [101 kB] Get:21 http://cdn-fastly.deb.debian.org/debian sid/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB] Get:22 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB] Get:23 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB] Get:24 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB] Get:25 http://cdn-fastly.deb.debian.org/debian sid/main amd64 t1utils amd64 1.41-3 [62.3 kB] Get:26 http://cdn-fastly.deb.debian.org/debian sid/main amd64 lintian all 2.9.1 [1193 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2847 kB in 5s (602 kB/s) Selecting previously unselected package diffstat. (Reading database ... 20302 files and directories currently installed.) Preparing to unpack .../00-diffstat_1.62-1_amd64.deb ... Unpacking diffstat (1.62-1) ... Selecting previously unselected package libapt-pkg-perl. Preparing to unpack .../01-libapt-pkg-perl_0.1.34+b1_amd64.deb ... Unpacking libapt-pkg-perl (0.1.34+b1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../02-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../03-libcgi-pm-perl_4.40-1_all.deb ... Unpacking libcgi-pm-perl (4.40-1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../04-libsub-name-perl_0.21-1+b3_amd64.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libclass-accessor-perl. Preparing to unpack .../05-libclass-accessor-perl_0.51-1_all.deb ... Unpacking libclass-accessor-perl (0.51-1) ... Selecting previously unselected package libclone-perl. Preparing to unpack .../06-libclone-perl_0.41-1+b1_amd64.deb ... Unpacking libclone-perl (0.41-1+b1) ... Selecting previously unselected package libdigest-hmac-perl. Preparing to unpack .../07-libdigest-hmac-perl_1.03+dfsg-2_all.deb ... Unpacking libdigest-hmac-perl (1.03+dfsg-2) ... Selecting previously unselected package libnet-ip-perl. Preparing to unpack .../08-libnet-ip-perl_1.26-2_all.deb ... Unpacking libnet-ip-perl (1.26-2) ... Selecting previously unselected package libnet-dns-perl. Preparing to unpack .../09-libnet-dns-perl_1.19-1_all.deb ... Unpacking libnet-dns-perl (1.19-1) ... Selecting previously unselected package libnet-domain-tld-perl. Preparing to unpack .../10-libnet-domain-tld-perl_1.75-1_all.deb ... Unpacking libnet-domain-tld-perl (1.75-1) ... Selecting previously unselected package libemail-valid-perl. Preparing to unpack .../11-libemail-valid-perl_1.202-1_all.deb ... Unpacking libemail-valid-perl (1.202-1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../12-libexporter-tiny-perl_1.002001-1_all.deb ... Unpacking libexporter-tiny-perl (1.002001-1) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../13-libipc-system-simple-perl_1.25-4_all.deb ... Unpacking libipc-system-simple-perl (1.25-4) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../14-libfile-basedir-perl_0.08-1_all.deb ... Unpacking libfile-basedir-perl (0.08-1) ... Selecting previously unselected package libfuture-perl. Preparing to unpack .../15-libfuture-perl_0.39-1_all.deb ... Unpacking libfuture-perl (0.39-1) ... Selecting previously unselected package libstruct-dumb-perl. Preparing to unpack .../16-libstruct-dumb-perl_0.09-1_all.deb ... Unpacking libstruct-dumb-perl (0.09-1) ... Selecting previously unselected package libio-async-perl. Preparing to unpack .../17-libio-async-perl_0.72-1_all.deb ... Unpacking libio-async-perl (0.72-1) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../18-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ... Unpacking libio-pty-perl (1:1.08-1.1+b5) ... Selecting previously unselected package libipc-run-perl. Preparing to unpack .../19-libipc-run-perl_20180523.0-1_all.deb ... Unpacking libipc-run-perl (20180523.0-1) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../20-liblist-moreutils-perl_0.416-1+b4_amd64.deb ... Unpacking liblist-moreutils-perl (0.416-1+b4) ... Selecting previously unselected package libparse-debianchangelog-perl. Preparing to unpack .../21-libparse-debianchangelog-perl_1.2.0-13_all.deb ... Unpacking libparse-debianchangelog-perl (1.2.0-13) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../22-libpath-tiny-perl_0.108-1_all.deb ... Unpacking libpath-tiny-perl (0.108-1) ... Selecting previously unselected package libtext-levenshtein-perl. Preparing to unpack .../23-libtext-levenshtein-perl_0.13-1_all.deb ... Unpacking libtext-levenshtein-perl (0.13-1) ... Selecting previously unselected package patchutils. Preparing to unpack .../24-patchutils_0.3.4-2_amd64.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package t1utils. Preparing to unpack .../25-t1utils_1.41-3_amd64.deb ... Unpacking t1utils (1.41-3) ... Selecting previously unselected package lintian. Preparing to unpack .../26-lintian_2.9.1_all.deb ... Unpacking lintian (2.9.1) ... Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf. Preparing to unpack .../27-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Setting up libapt-pkg-perl (0.1.34+b1) ... Setting up libstruct-dumb-perl (0.09-1) ... Setting up libio-pty-perl (1:1.08-1.1+b5) ... Setting up libclone-perl (0.41-1+b1) ... Setting up libfuture-perl (0.39-1) ... Setting up libcgi-pm-perl (4.40-1) ... Setting up libtext-levenshtein-perl (0.13-1) ... Setting up libio-async-perl (0.72-1) ... Setting up patchutils (0.3.4-2) ... Setting up libdigest-hmac-perl (1.03+dfsg-2) ... Setting up libipc-system-simple-perl (1.25-4) ... Setting up libnet-domain-tld-perl (1.75-1) ... Setting up t1utils (1.41-3) ... Setting up diffstat (1.62-1) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up libpath-tiny-perl (0.108-1) ... Setting up libexporter-tiny-perl (1.002001-1) ... Setting up libclass-accessor-perl (0.51-1) ... Setting up libnet-ip-perl (1.26-2) ... Setting up libfile-basedir-perl (0.08-1) ... Setting up liblist-moreutils-perl (0.416-1+b4) ... Setting up libnet-dns-perl (1.19-1) ... Setting up libparse-debianchangelog-perl (1.2.0-13) ... Setting up libemail-valid-perl (1.202-1) ... Setting up lintian (2.9.1) ... Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Processing triggers for man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. I: Lintian run was successful. +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following packages will be REMOVED: autoconf* automake* autopoint* autotools-dev* bsdmainutils* debhelper* dh-autoreconf* dh-strip-nondeterminism* diffstat* dwz* gcc-8-base:armhf* gettext* gettext-base* groff-base* intltool-debian* libapt-pkg-perl* libarchive-zip-perl* libasan5:armhf* libatomic1:armhf* libbsd0* libbsd0:armhf* libc6:armhf* libc6-dev:armhf* libcapture-tiny-perl* libcgi-pm-perl* libclass-accessor-perl* libclone-perl* libcroco3* libdigest-hmac-perl* libelf1* libemail-valid-perl* libexporter-tiny-perl* libfile-basedir-perl* libfile-stripnondeterminism-perl* libfuture-perl* libgcc-8-dev:armhf* libgcc1:armhf* libglib2.0-0* libgomp1:armhf* libice-dev:armhf* libice6:armhf* libio-async-perl* libio-pty-perl* libipc-run-perl* libipc-system-simple-perl* liblist-moreutils-perl* libncurses6* libnet-dns-perl* libnet-domain-tld-perl* libnet-ip-perl* libparse-debianchangelog-perl* libpath-tiny-perl* libpipeline1* libpthread-stubs0-dev* libpthread-stubs0-dev:armhf* libsigsegv2* libsm-dev:armhf* libsm6:armhf* libstdc++-8-dev:armhf* libstdc++6:armhf* libstruct-dumb-perl* libsub-name-perl* libtext-levenshtein-perl* libtool* libubsan1:armhf* libuchardet0* libuuid1:armhf* libx11-6* libx11-6:armhf* libx11-data* libx11-dev* libx11-dev:armhf* libxau-dev* libxau-dev:armhf* libxau6* libxau6:armhf* libxcb1* libxcb1:armhf* libxcb1-dev* libxcb1-dev:armhf* libxdmcp-dev* libxdmcp-dev:armhf* libxdmcp6* libxdmcp6:armhf* libxext-dev:armhf* libxext6:armhf* libxmu-dev:armhf* libxmu-headers* libxmu6:armhf* libxpm-dev:armhf* libxpm4:armhf* libxt-dev:armhf* libxt6:armhf* lintian* linux-libc-dev:armhf* m4* man-db* patchutils* po-debconf* sbuild-build-depends-lintian-dummy:armhf* sbuild-build-depends-main-dummy:armhf* t1utils* x11-common* x11proto-core-dev* x11proto-dev* x11proto-xext-dev* xorg-sgml-doctools* xtrans-dev* 0 upgraded, 0 newly installed, 108 to remove and 0 not upgraded. After this operation, 106 MB disk space will be freed. (Reading database ... 21580 files and directories currently installed.) Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Removing lintian (2.9.1) ... Removing diffstat (1.62-1) ... Removing libstdc++-8-dev:armhf (8.3.0-2) ... Removing libgcc-8-dev:armhf (8.3.0-2) ... Removing libubsan1:armhf (8.3.0-2) ... Removing libasan5:armhf (8.3.0-2) ... Removing libstdc++6:armhf (8.3.0-2) ... Removing libapt-pkg-perl (0.1.34+b1) ... Removing libatomic1:armhf (8.3.0-2) ... Removing libxmu-dev:armhf (2:1.1.2-2) ... Removing libxt-dev:armhf (1:1.1.5-1) ... Removing libxpm-dev:armhf (1:3.5.12-1) ... Removing libxmu6:armhf (2:1.1.2-2) ... Removing libxt6:armhf (1:1.1.5-1) ... Removing libsm-dev:armhf (2:1.2.3-1) ... Removing libice-dev:armhf (2:1.0.9-2) ... Removing libxmu-headers (2:1.1.2-2) ... Removing libx11-dev:amd64 (2:1.6.7-1) ... Removing libxcb1-dev:amd64 (1.13.1-2) ... Removing libxdmcp-dev:amd64 (1:1.1.2-3) ... Removing libx11-6:amd64 (2:1.6.7-1) ... Removing libxcb1:amd64 (1.13.1-2) ... Removing libxdmcp6:amd64 (1:1.1.2-3) ... Removing libsm6:armhf (2:1.2.3-1) ... Removing libuuid1:armhf (2.33.1-0.1) ... Removing libxpm4:armhf (1:3.5.12-1) ... Removing libc6-dev:armhf (2.28-8) ... Removing libcapture-tiny-perl (0.48-1) ... Removing libparse-debianchangelog-perl (1.2.0-13) ... Removing libcgi-pm-perl (4.40-1) ... Removing libclass-accessor-perl (0.51-1) ... Removing libclone-perl (0.41-1+b1) ... Removing libemail-valid-perl (1.202-1) ... Removing libnet-dns-perl (1.19-1) ... Removing libdigest-hmac-perl (1.03+dfsg-2) ... Removing liblist-moreutils-perl (0.416-1+b4) ... Removing libexporter-tiny-perl (1.002001-1) ... Removing libfile-basedir-perl (0.08-1) ... Removing libio-async-perl (0.72-1) ... Removing libfuture-perl (0.39-1) ... Removing libgomp1:armhf (8.3.0-2) ... Removing libipc-run-perl (20180523.0-1) ... Removing libio-pty-perl (1:1.08-1.1+b5) ... Removing libipc-system-simple-perl (1.25-4) ... Removing libnet-domain-tld-perl (1.75-1) ... Removing libnet-ip-perl (1.26-2) ... Removing libpath-tiny-perl (0.108-1) ... Removing libpthread-stubs0-dev:amd64 (0.4-1) ... Removing libstruct-dumb-perl (0.09-1) ... Removing libsub-name-perl (0.21-1+b3) ... Removing libtext-levenshtein-perl (0.13-1) ... Removing libxau-dev:amd64 (1:1.0.8-1+b2) ... Removing libxau6:amd64 (1:1.0.8-1+b2) ... Removing libxext-dev:armhf (2:1.3.3-1+b2) ... Removing libxext6:armhf (2:1.3.3-1+b2) ... Removing linux-libc-dev:armhf (4.19.20-1) ... Removing patchutils (0.3.4-2) ... Removing t1utils (1.41-3) ... Removing x11proto-xext-dev (2018.4-4) ... Removing libx11-dev:armhf (2:1.6.7-1) ... Removing libxcb1-dev:armhf (1.13.1-2) ... Removing libxdmcp-dev:armhf (1:1.1.2-3) ... Removing libx11-6:armhf (2:1.6.7-1) ... Removing libxcb1:armhf (1.13.1-2) ... Removing libxdmcp6:armhf (1:1.1.2-3) ... Removing libice6:armhf (2:1.0.9-2) ... Removing libbsd0:armhf (0.9.1-2) ... Removing libpthread-stubs0-dev:armhf (0.4-1) ... Removing libx11-data (2:1.6.7-1) ... Removing libxau-dev:armhf (1:1.0.8-1+b2) ... Removing libxau6:armhf (1:1.0.8-1+b2) ... Removing x11-common (1:7.7+19) ... invoke-rc.d: could not determine current runlevel All runlevel operations denied by policy invoke-rc.d: policy-rc.d denied execution of stop. Removing x11proto-core-dev (2018.4-4) ... Removing x11proto-dev (2018.4-4) ... Removing xorg-sgml-doctools (1:1.11-1) ... Removing xtrans-dev (1.3.5-1) ... Removing libgcc1:armhf (1:8.3.0-2) ... Removing debhelper (12.1.1) ... Removing dh-strip-nondeterminism (1.1.1-1) ... Removing man-db (2.8.5-2) ... Removing bsdmainutils (11.1.2+b1) ... Removing dwz (0.12-3) ... Removing gcc-8-base:armhf (8.3.0-2) ... Removing po-debconf (1.0.21) ... Removing intltool-debian (0.35.0+20060710.5) ... Removing gettext (0.19.8.1-9) ... Removing gettext-base (0.19.8.1-9) ... Removing groff-base (1.22.4-3) ... Removing libfile-stripnondeterminism-perl (1.1.1-1) ... Removing libarchive-zip-perl (1.64-1) ... Removing libbsd0:amd64 (0.9.1-2) ... Removing libc6:armhf (2.28-8) ... Removing libcroco3:amd64 (0.6.12-3) ... Removing libelf1:amd64 (0.176-1) ... Removing libglib2.0-0:amd64 (2.58.3-1) ... Removing libncurses6:amd64 (6.1+20181013-2) ... Removing libpipeline1:amd64 (1.5.1-2) ... Removing libuchardet0:amd64 (0.0.6-3) ... Removing dh-autoreconf (19) ... Removing automake (1:1.16.1-4) ... Removing autoconf (2.69-11) ... Removing autopoint (0.19.8.1-9) ... Removing libtool (2.4.6-10) ... Removing autotools-dev (20180224.1) ... Removing m4 (1.4.18-2) ... Removing libsigsegv2:amd64 (2.12-2) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... Processing triggers for libc-bin (2.28-8) ... (Reading database ... 16491 files and directories currently installed.) Purging configuration files for libglib2.0-0:amd64 (2.58.3-1) ... Purging configuration files for x11-common (1:7.7+19) ... Purging configuration files for lintian (2.9.1) ... Purging configuration files for man-db (2.8.5-2) ... Purging configuration files for bsdmainutils (11.1.2+b1) ... Purging configuration files for autoconf (2.69-11) ... Purging configuration files for libc6:armhf (2.28-8) ... Purging configuration files for groff-base (1.22.4-3) ... +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any Build-Space: n/a Build-Time: 11 Distribution: unstable-amd64-sbuild Foreign Architectures: armhf Host Architecture: armhf Install-Time: 8 Job: /home/build/sbuild-setup/repo/pool/main/w/wmcpuload/wmcpuload_1.1.1-2.dsc Lintian: pass Machine Architecture: amd64 Package: wmcpuload Package-Time: 24 Source-Version: 1.1.1-2 Space: n/a Status: successful Version: 1.1.1-2 -------------------------------------------------------------------------------- Finished at 2019-03-07T11:59:45Z Build needed 00:00:24, no disk space