sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 36857dea695f +==============================================================================+ | wmnd 0.4.17-3 (armhf) Thu, 07 Mar 2019 12:03:46 +0000 | +==============================================================================+ Package: wmnd Version: 0.4.17-3 Source Version: 0.4.17-3 Distribution: unstable-amd64-sbuild Machine Architecture: amd64 Host Architecture: armhf Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-82f90ade-8a1d-4247-9e4b-790750ee8247' with '<>' I: NOTICE: Log filtering will replace 'build/wmnd-65RIwN/resolver-3pSBy9' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Hit:1 http://cdn-fastly.deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /home/build/sbuild-setup/repo/pool/main/w/wmnd/wmnd_0.4.17-3.dsc exists in /home/build/sbuild-setup/repo/pool/main/w/wmnd; copying to chroot I: NOTICE: Log filtering will replace 'build/wmnd-65RIwN/wmnd-0.4.17' with '<>' I: NOTICE: Log filtering will replace 'build/wmnd-65RIwN' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper (>= 11), libsnmp-dev, libx11-dev, libxext-dev, libxpm-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf Filtered Build-Depends: debhelper (>= 11), libsnmp-dev, libx11-dev, libxext-dev, libxpm-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [412 B] Get:5 copy:/<>/apt_archive ./ Packages [504 B] Fetched 1873 B in 0s (162 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libbsd0 libbsd0:armhf libbz2-1.0:armhf libc6:armhf libc6-dev:armhf libcroco3 libdb5.3:armhf libelf1 libffi6:armhf libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libgdbm-compat4:armhf libgdbm6:armhf libglib2.0-0 libgmp10:armhf libgnutls30:armhf libgomp1:armhf libhogweed4:armhf libidn2-0:armhf libmariadb3:armhf libncurses6 libnettle6:armhf libp11-kit0:armhf libpci-dev:armhf libpci3:armhf libperl5.28:armhf libpipeline1 libprocps7 libpthread-stubs0-dev:armhf libsensors-config libsensors4-dev:armhf libsensors5:armhf libsigsegv2 libsnmp-base libsnmp-dev:armhf libsnmp30:armhf libssl-dev:armhf libssl1.1:armhf libstdc++-8-dev:armhf libstdc++6:armhf libtasn1-6:armhf libtool libubsan1:armhf libuchardet0 libudev-dev:armhf libudev1:armhf libunistring2:armhf libwrap0:armhf libwrap0-dev:armhf libx11-6:armhf libx11-data libx11-dev:armhf libxau-dev:armhf libxau6:armhf libxcb1:armhf libxcb1-dev:armhf libxdmcp-dev:armhf libxdmcp6:armhf libxext-dev:armhf libxext6:armhf libxpm-dev:armhf libxpm4:armhf linux-libc-dev:armhf m4 man-db mariadb-common mysql-common po-debconf procps x11proto-core-dev x11proto-dev x11proto-xext-dev xorg-sgml-doctools xtrans-dev zlib1g:armhf zlib1g-dev:armhf Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf gdbm-l10n:armhf gnutls-bin:armhf lm-sensors lm-sensors:armhf snmp-mibs-downloader libssl-doc:armhf libstdc++-8-doc:armhf libtool-doc gfortran | fortran95-compiler gcj-jdk libx11-doc:armhf libxcb-doc:armhf libxext-doc:armhf m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libarchive-cpio-perl libglib2.0-data shared-mime-info xdg-user-dirs libgpm2 libltdl-dev libmail-sendmail-perl psmisc The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libbsd0 libbsd0:armhf libbz2-1.0:armhf libc6:armhf libc6-dev:armhf libcroco3 libdb5.3:armhf libelf1 libffi6:armhf libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libgdbm-compat4:armhf libgdbm6:armhf libglib2.0-0 libgmp10:armhf libgnutls30:armhf libgomp1:armhf libhogweed4:armhf libidn2-0:armhf libmariadb3:armhf libncurses6 libnettle6:armhf libp11-kit0:armhf libpci-dev:armhf libpci3:armhf libperl5.28:armhf libpipeline1 libprocps7 libpthread-stubs0-dev:armhf libsensors-config libsensors4-dev:armhf libsensors5:armhf libsigsegv2 libsnmp-base libsnmp-dev:armhf libsnmp30:armhf libssl-dev:armhf libssl1.1:armhf libstdc++-8-dev:armhf libstdc++6:armhf libtasn1-6:armhf libtool libubsan1:armhf libuchardet0 libudev-dev:armhf libudev1:armhf libunistring2:armhf libwrap0:armhf libwrap0-dev:armhf libx11-6:armhf libx11-data libx11-dev:armhf libxau-dev:armhf libxau6:armhf libxcb1:armhf libxcb1-dev:armhf libxdmcp-dev:armhf libxdmcp6:armhf libxext-dev:armhf libxext6:armhf libxpm-dev:armhf libxpm4:armhf linux-libc-dev:armhf m4 man-db mariadb-common mysql-common po-debconf procps sbuild-build-depends-main-dummy:armhf x11proto-core-dev x11proto-dev x11proto-xext-dev xorg-sgml-doctools xtrans-dev zlib1g:armhf zlib1g-dev:armhf 0 upgraded, 95 newly installed, 0 to remove and 0 not upgraded. Need to get 5272 kB/37.0 MB of archives. After this operation, 137 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [920 B] Get:2 http://cdn-fastly.deb.debian.org/debian sid/main amd64 mysql-common all 5.8+1.0.5 [7324 B] Get:3 http://cdn-fastly.deb.debian.org/debian sid/main amd64 mariadb-common all 1:10.3.13-1 [30.5 kB] Get:4 http://cdn-fastly.deb.debian.org/debian sid/main armhf libmariadb3 armhf 1:10.3.13-1 [170 kB] Get:5 http://cdn-fastly.deb.debian.org/debian sid/main armhf libpci3 armhf 1:3.5.2-1 [50.9 kB] Get:6 http://cdn-fastly.deb.debian.org/debian sid/main armhf libpci-dev armhf 1:3.5.2-1 [71.9 kB] Get:7 http://cdn-fastly.deb.debian.org/debian sid/main armhf libsensors4-dev armhf 1:3.5.0-3 [60.6 kB] Get:8 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libsnmp-base all 5.7.3+dfsg-5 [1595 kB] Get:9 http://cdn-fastly.deb.debian.org/debian sid/main armhf libsnmp30 armhf 5.7.3+dfsg-5 [2235 kB] Get:10 http://cdn-fastly.deb.debian.org/debian sid/main armhf libwrap0-dev armhf 7.6.q-28 [19.7 kB] Get:11 http://cdn-fastly.deb.debian.org/debian sid/main armhf libsnmp-dev armhf 5.7.3+dfsg-5 [1030 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 5272 kB in 2s (2796 kB/s) Selecting previously unselected package libbsd0:amd64. (Reading database ... 16457 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_amd64.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../06-libncurses6_6.1+20181013-2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2) ... Selecting previously unselected package libprocps7:amd64. Preparing to unpack .../07-libprocps7_2%3a3.3.15-2_amd64.deb ... Unpacking libprocps7:amd64 (2:3.3.15-2) ... Selecting previously unselected package procps. Preparing to unpack .../08-procps_2%3a3.3.15-2_amd64.deb ... Unpacking procps (2:3.3.15-2) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../10-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.6-10_all.deb ... Unpacking libtool (2.4.6-10) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.1.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.1.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../21-libelf1_0.176-1_amd64.deb ... Unpacking libelf1:amd64 (0.176-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../23-libglib2.0-0_2.58.3-1_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-1) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../24-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package gcc-8-base:armhf. Preparing to unpack .../29-gcc-8-base_8.3.0-2_armhf.deb ... Unpacking gcc-8-base:armhf (8.3.0-2) ... Selecting previously unselected package libgcc1:armhf. Preparing to unpack .../30-libgcc1_1%3a8.3.0-2_armhf.deb ... Unpacking libgcc1:armhf (1:8.3.0-2) ... Selecting previously unselected package libc6:armhf. Preparing to unpack .../31-libc6_2.28-8_armhf.deb ... Unpacking libc6:armhf (2.28-8) ... Selecting previously unselected package libstdc++6:armhf. Preparing to unpack .../32-libstdc++6_8.3.0-2_armhf.deb ... Unpacking libstdc++6:armhf (8.3.0-2) ... Selecting previously unselected package libasan5:armhf. Preparing to unpack .../33-libasan5_8.3.0-2_armhf.deb ... Unpacking libasan5:armhf (8.3.0-2) ... Selecting previously unselected package libatomic1:armhf. Preparing to unpack .../34-libatomic1_8.3.0-2_armhf.deb ... Unpacking libatomic1:armhf (8.3.0-2) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../35-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package libbz2-1.0:armhf. Preparing to unpack .../36-libbz2-1.0_1.0.6-9_armhf.deb ... Unpacking libbz2-1.0:armhf (1.0.6-9) ... Selecting previously unselected package linux-libc-dev:armhf. Preparing to unpack .../37-linux-libc-dev_4.19.20-1_armhf.deb ... Unpacking linux-libc-dev:armhf (4.19.20-1) ... Selecting previously unselected package libc6-dev:armhf. Preparing to unpack .../38-libc6-dev_2.28-8_armhf.deb ... Unpacking libc6-dev:armhf (2.28-8) ... Selecting previously unselected package libdb5.3:armhf. Preparing to unpack .../39-libdb5.3_5.3.28+dfsg1-0.5_armhf.deb ... Unpacking libdb5.3:armhf (5.3.28+dfsg1-0.5) ... Selecting previously unselected package libffi6:armhf. Preparing to unpack .../40-libffi6_3.2.1-9_armhf.deb ... Unpacking libffi6:armhf (3.2.1-9) ... Selecting previously unselected package libgomp1:armhf. Preparing to unpack .../41-libgomp1_8.3.0-2_armhf.deb ... Unpacking libgomp1:armhf (8.3.0-2) ... Selecting previously unselected package libubsan1:armhf. Preparing to unpack .../42-libubsan1_8.3.0-2_armhf.deb ... Unpacking libubsan1:armhf (8.3.0-2) ... Selecting previously unselected package libgcc-8-dev:armhf. Preparing to unpack .../43-libgcc-8-dev_8.3.0-2_armhf.deb ... Unpacking libgcc-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package libgdbm6:armhf. Preparing to unpack .../44-libgdbm6_1.18.1-3_armhf.deb ... Unpacking libgdbm6:armhf (1.18.1-3) ... Selecting previously unselected package libgdbm-compat4:armhf. Preparing to unpack .../45-libgdbm-compat4_1.18.1-3_armhf.deb ... Unpacking libgdbm-compat4:armhf (1.18.1-3) ... Selecting previously unselected package libgmp10:armhf. Preparing to unpack .../46-libgmp10_2%3a6.1.2+dfsg-4_armhf.deb ... Unpacking libgmp10:armhf (2:6.1.2+dfsg-4) ... Selecting previously unselected package libnettle6:armhf. Preparing to unpack .../47-libnettle6_3.4.1-1_armhf.deb ... Unpacking libnettle6:armhf (3.4.1-1) ... Selecting previously unselected package libhogweed4:armhf. Preparing to unpack .../48-libhogweed4_3.4.1-1_armhf.deb ... Unpacking libhogweed4:armhf (3.4.1-1) ... Selecting previously unselected package libunistring2:armhf. Preparing to unpack .../49-libunistring2_0.9.10-1_armhf.deb ... Unpacking libunistring2:armhf (0.9.10-1) ... Selecting previously unselected package libidn2-0:armhf. Preparing to unpack .../50-libidn2-0_2.0.5-1_armhf.deb ... Unpacking libidn2-0:armhf (2.0.5-1) ... Selecting previously unselected package libp11-kit0:armhf. Preparing to unpack .../51-libp11-kit0_0.23.15-2_armhf.deb ... Unpacking libp11-kit0:armhf (0.23.15-2) ... Selecting previously unselected package libtasn1-6:armhf. Preparing to unpack .../52-libtasn1-6_4.13-3_armhf.deb ... Unpacking libtasn1-6:armhf (4.13-3) ... Selecting previously unselected package libgnutls30:armhf. Preparing to unpack .../53-libgnutls30_3.6.6-2_armhf.deb ... Unpacking libgnutls30:armhf (3.6.6-2) ... Selecting previously unselected package mysql-common. Preparing to unpack .../54-mysql-common_5.8+1.0.5_all.deb ... Unpacking mysql-common (5.8+1.0.5) ... Selecting previously unselected package mariadb-common. Preparing to unpack .../55-mariadb-common_1%3a10.3.13-1_all.deb ... Unpacking mariadb-common (1:10.3.13-1) ... Selecting previously unselected package zlib1g:armhf. Preparing to unpack .../56-zlib1g_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libmariadb3:armhf. Preparing to unpack .../57-libmariadb3_1%3a10.3.13-1_armhf.deb ... Unpacking libmariadb3:armhf (1:10.3.13-1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../58-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libudev1:armhf. Preparing to unpack .../59-libudev1_241-1_armhf.deb ... Unpacking libudev1:armhf (241-1) ... Selecting previously unselected package libpci3:armhf. Preparing to unpack .../60-libpci3_1%3a3.5.2-1_armhf.deb ... Unpacking libpci3:armhf (1:3.5.2-1) ... Selecting previously unselected package libudev-dev:armhf. Preparing to unpack .../61-libudev-dev_241-1_armhf.deb ... Unpacking libudev-dev:armhf (241-1) ... Selecting previously unselected package libpci-dev:armhf. Preparing to unpack .../62-libpci-dev_1%3a3.5.2-1_armhf.deb ... Unpacking libpci-dev:armhf (1:3.5.2-1) ... Selecting previously unselected package libperl5.28:armhf. Preparing to unpack .../63-libperl5.28_5.28.1-4_armhf.deb ... Unpacking libperl5.28:armhf (5.28.1-4) ... Selecting previously unselected package libpthread-stubs0-dev:armhf. Preparing to unpack .../64-libpthread-stubs0-dev_0.4-1_armhf.deb ... Unpacking libpthread-stubs0-dev:armhf (0.4-1) ... Selecting previously unselected package libsensors-config. Preparing to unpack .../65-libsensors-config_1%3a3.5.0-3_all.deb ... Unpacking libsensors-config (1:3.5.0-3) ... Selecting previously unselected package libsensors5:armhf. Preparing to unpack .../66-libsensors5_1%3a3.5.0-3_armhf.deb ... Unpacking libsensors5:armhf (1:3.5.0-3) ... Selecting previously unselected package libsensors4-dev:armhf. Preparing to unpack .../67-libsensors4-dev_1%3a3.5.0-3_armhf.deb ... Unpacking libsensors4-dev:armhf (1:3.5.0-3) ... Selecting previously unselected package libsnmp-base. Preparing to unpack .../68-libsnmp-base_5.7.3+dfsg-5_all.deb ... Unpacking libsnmp-base (5.7.3+dfsg-5) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../69-libssl1.1_1.1.1b-1_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1b-1) ... Selecting previously unselected package libwrap0:armhf. Preparing to unpack .../70-libwrap0_7.6.q-28_armhf.deb ... Unpacking libwrap0:armhf (7.6.q-28) ... Selecting previously unselected package libsnmp30:armhf. Preparing to unpack .../71-libsnmp30_5.7.3+dfsg-5_armhf.deb ... Unpacking libsnmp30:armhf (5.7.3+dfsg-5) ... Selecting previously unselected package libwrap0-dev:armhf. Preparing to unpack .../72-libwrap0-dev_7.6.q-28_armhf.deb ... Unpacking libwrap0-dev:armhf (7.6.q-28) ... Selecting previously unselected package libssl-dev:armhf. Preparing to unpack .../73-libssl-dev_1.1.1b-1_armhf.deb ... Unpacking libssl-dev:armhf (1.1.1b-1) ... Selecting previously unselected package libsnmp-dev:armhf. Preparing to unpack .../74-libsnmp-dev_5.7.3+dfsg-5_armhf.deb ... Unpacking libsnmp-dev:armhf (5.7.3+dfsg-5) ... Selecting previously unselected package libstdc++-8-dev:armhf. Preparing to unpack .../75-libstdc++-8-dev_8.3.0-2_armhf.deb ... Unpacking libstdc++-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package libxau6:armhf. Preparing to unpack .../76-libxau6_1%3a1.0.8-1+b2_armhf.deb ... Unpacking libxau6:armhf (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:armhf. Preparing to unpack .../77-libxdmcp6_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp6:armhf (1:1.1.2-3) ... Selecting previously unselected package libxcb1:armhf. Preparing to unpack .../78-libxcb1_1.13.1-2_armhf.deb ... Unpacking libxcb1:armhf (1.13.1-2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../79-libx11-data_2%3a1.6.7-1_all.deb ... Unpacking libx11-data (2:1.6.7-1) ... Selecting previously unselected package libx11-6:armhf. Preparing to unpack .../80-libx11-6_2%3a1.6.7-1_armhf.deb ... Unpacking libx11-6:armhf (2:1.6.7-1) ... Selecting previously unselected package xorg-sgml-doctools. Preparing to unpack .../81-xorg-sgml-doctools_1%3a1.11-1_all.deb ... Unpacking xorg-sgml-doctools (1:1.11-1) ... Selecting previously unselected package x11proto-dev. Preparing to unpack .../82-x11proto-dev_2018.4-4_all.deb ... Unpacking x11proto-dev (2018.4-4) ... Selecting previously unselected package x11proto-core-dev. Preparing to unpack .../83-x11proto-core-dev_2018.4-4_all.deb ... Unpacking x11proto-core-dev (2018.4-4) ... Selecting previously unselected package libxau-dev:armhf. Preparing to unpack .../84-libxau-dev_1%3a1.0.8-1+b2_armhf.deb ... Unpacking libxau-dev:armhf (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp-dev:armhf. Preparing to unpack .../85-libxdmcp-dev_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp-dev:armhf (1:1.1.2-3) ... Selecting previously unselected package xtrans-dev. Preparing to unpack .../86-xtrans-dev_1.3.5-1_all.deb ... Unpacking xtrans-dev (1.3.5-1) ... Selecting previously unselected package libxcb1-dev:armhf. Preparing to unpack .../87-libxcb1-dev_1.13.1-2_armhf.deb ... Unpacking libxcb1-dev:armhf (1.13.1-2) ... Selecting previously unselected package libx11-dev:armhf. Preparing to unpack .../88-libx11-dev_2%3a1.6.7-1_armhf.deb ... Unpacking libx11-dev:armhf (2:1.6.7-1) ... Selecting previously unselected package libxext6:armhf. Preparing to unpack .../89-libxext6_2%3a1.3.3-1+b2_armhf.deb ... Unpacking libxext6:armhf (2:1.3.3-1+b2) ... Selecting previously unselected package x11proto-xext-dev. Preparing to unpack .../90-x11proto-xext-dev_2018.4-4_all.deb ... Unpacking x11proto-xext-dev (2018.4-4) ... Selecting previously unselected package libxext-dev:armhf. Preparing to unpack .../91-libxext-dev_2%3a1.3.3-1+b2_armhf.deb ... Unpacking libxext-dev:armhf (2:1.3.3-1+b2) ... Selecting previously unselected package libxpm4:armhf. Preparing to unpack .../92-libxpm4_1%3a3.5.12-1_armhf.deb ... Unpacking libxpm4:armhf (1:3.5.12-1) ... Selecting previously unselected package libxpm-dev:armhf. Preparing to unpack .../93-libxpm-dev_1%3a3.5.12-1_armhf.deb ... Unpacking libxpm-dev:armhf (1:3.5.12-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy:armhf. Preparing to unpack .../94-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up mysql-common (5.8+1.0.5) ... update-alternatives: using /etc/mysql/my.cnf.fallback to provide /etc/mysql/my.cnf (my.cnf) in auto mode Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-1) ... No schema files found: doing nothing. Setting up libsnmp-base (5.7.3+dfsg-5) ... Setting up libprocps7:amd64 (2:3.3.15-2) ... Setting up libsensors-config (1:3.5.0-3) ... Setting up linux-libc-dev:armhf (4.19.20-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up libpthread-stubs0-dev:armhf (0.4-1) ... Setting up mariadb-common (1:10.3.13-1) ... update-alternatives: using /etc/mysql/mariadb.cnf to provide /etc/mysql/my.cnf (my.cnf) in auto mode Setting up xtrans-dev (1.3.5-1) ... Setting up autotools-dev (20180224.1) ... Setting up libx11-data (2:1.6.7-1) ... Setting up libncurses6:amd64 (6.1+20181013-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up gcc-8-base:armhf (8.3.0-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libcroco3:amd64 (0.6.12-3) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up procps (2:3.3.15-2) ... update-alternatives: using /usr/bin/w.procps to provide /usr/bin/w (w) in auto mode Setting up xorg-sgml-doctools (1:1.11-1) ... Setting up libbsd0:amd64 (0.9.1-2) ... Setting up libelf1:amd64 (0.176-1) ... Setting up x11proto-dev (2018.4-4) ... Setting up libfile-stripnondeterminism-perl (1.1.1-1) ... Setting up gettext (0.19.8.1-9) ... Setting up libtool (2.4.6-10) ... Setting up m4 (1.4.18-2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up x11proto-core-dev (2018.4-4) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up autoconf (2.69-11) ... Setting up x11proto-xext-dev (2018.4-4) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libc6:armhf (2.28-8) ... Setting up libudev1:armhf (241-1) ... Setting up libtasn1-6:armhf (4.13-3) ... Setting up libc6-dev:armhf (2.28-8) ... Setting up libbz2-1.0:armhf (1.0.6-9) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libdb5.3:armhf (5.3.28+dfsg1-0.5) ... Setting up libgdbm6:armhf (1.18.1-3) ... Setting up libxau6:armhf (1:1.0.8-1+b2) ... Setting up libxdmcp6:armhf (1:1.1.2-3) ... Setting up libxcb1:armhf (1.13.1-2) ... Setting up libxau-dev:armhf (1:1.0.8-1+b2) ... Setting up libgcc1:armhf (1:8.3.0-2) ... Setting up libssl1.1:armhf (1.1.1b-1) ... Setting up libunistring2:armhf (0.9.10-1) ... Setting up debhelper (12.1.1) ... Setting up zlib1g:armhf (1:1.2.11.dfsg-1) ... Setting up libffi6:armhf (3.2.1-9) ... Setting up libidn2-0:armhf (2.0.5-1) ... Setting up libgomp1:armhf (8.3.0-2) ... Setting up dh-autoreconf (19) ... Setting up libxdmcp-dev:armhf (1:1.1.2-3) ... Setting up libwrap0:armhf (7.6.q-28) ... Setting up libgmp10:armhf (2:6.1.2+dfsg-4) ... Setting up libp11-kit0:armhf (0.23.15-2) ... Setting up libssl-dev:armhf (1.1.1b-1) ... Setting up libatomic1:armhf (8.3.0-2) ... Setting up libgdbm-compat4:armhf (1.18.1-3) ... Setting up libudev-dev:armhf (241-1) ... Setting up libsensors5:armhf (1:3.5.0-3) ... Setting up libnettle6:armhf (3.4.1-1) ... Setting up libperl5.28:armhf (5.28.1-4) ... Setting up dh-strip-nondeterminism (1.1.1-1) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up libpci3:armhf (1:3.5.2-1) ... Setting up libwrap0-dev:armhf (7.6.q-28) ... Setting up libx11-6:armhf (2:1.6.7-1) ... Setting up libstdc++6:armhf (8.3.0-2) ... Setting up libpci-dev:armhf (1:3.5.2-1) ... Setting up libxcb1-dev:armhf (1.13.1-2) ... Setting up libxpm4:armhf (1:3.5.12-1) ... Setting up libhogweed4:armhf (3.4.1-1) ... Setting up libx11-dev:armhf (2:1.6.7-1) ... Setting up libxext6:armhf (2:1.3.3-1+b2) ... Setting up libsensors4-dev:armhf (1:3.5.0-3) ... Setting up libasan5:armhf (8.3.0-2) ... Setting up libgnutls30:armhf (3.6.6-2) ... Setting up libxpm-dev:armhf (1:3.5.12-1) ... Setting up libmariadb3:armhf (1:10.3.13-1) ... Setting up libxext-dev:armhf (2:1.3.3-1+b2) ... Setting up libubsan1:armhf (8.3.0-2) ... Setting up libsnmp30:armhf (5.7.3+dfsg-5) ... Setting up libgcc-8-dev:armhf (8.3.0-2) ... Setting up libsnmp-dev:armhf (5.7.3+dfsg-5) ... Setting up libstdc++-8-dev:armhf (8.3.0-2) ... Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Processing triggers for libc-bin (2.28-8) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Initial Foreign Architectures: armhf Arch check ok (armhf included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64) Toolchain package versions: binutils_2.31.1-15 dpkg-dev_1.19.5 g++-8_8.3.0-2 gcc-8_8.3.0-2 libc6-dev_2.28-8 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.3.0-2cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.3.0-2cross1 linux-libc-dev_4.19.20-1 Package versions: adduser_3.118 apt_1.8.0~rc4 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.1 base-passwd_3.5.46 bash_5.0-2 binutils_2.31.1-15 binutils-arm-linux-gnueabihf_2.31.1-15 binutils-common_2.31.1-15 binutils-x86-64-linux-gnu_2.31.1-15 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.6 bzip2_1.0.6-9 ca-certificates_20190110 ccache_3.6-1 coreutils_8.30-3 cpp_4:8.3.0-1 cpp-8_8.3.0-2 cpp-8-arm-linux-gnueabihf_8.3.0-2cross1 cpp-arm-linux-gnueabihf_4:8.3.0-1 cross-config_2.6.15-2 crossbuild-essential-armhf_12.6 dash_0.5.10.2-5 debconf_1.5.71 debhelper_12.1.1 debian-archive-keyring_2018.1 debianutils_4.8.6.1 dh-autoreconf_19 dh-strip-nondeterminism_1.1.1-1 diffutils_1:3.7-2 dirmngr_2.2.13-1 dpkg_1.19.5 dpkg-cross_2.6.15-2 dpkg-dev_1.19.5 dwz_0.12-3 e2fsprogs_1.45.0-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-4 findutils_4.6.0+git+20190209-2 g++_4:8.3.0-1 g++-8_8.3.0-2 g++-8-arm-linux-gnueabihf_8.3.0-2cross1 g++-arm-linux-gnueabihf_4:8.3.0-1 gcc_4:8.3.0-1 gcc-8_8.3.0-2 gcc-8-arm-linux-gnueabihf_8.3.0-2cross1 gcc-8-arm-linux-gnueabihf-base_8.3.0-2cross1 gcc-8-base_8.3.0-2 gcc-8-cross-base_8.3.0-2cross1 gcc-arm-linux-gnueabihf_4:8.3.0-1 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.13-1 gnupg-l10n_2.2.13-1 gnupg-utils_2.2.13-1 gpg_2.2.13-1 gpg-agent_2.2.13-1 gpg-wks-client_2.2.13-1 gpg-wks-server_2.2.13-1 gpgconf_2.2.13-1 gpgsm_2.2.13-1 gpgv_2.2.13-1 grep_3.3-1 groff-base_1.22.4-3 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-4 libapt-pkg5.0_1.8.0~rc4 libarchive-zip-perl_1.64-1 libasan5_8.3.0-2 libasan5-armhf-cross_8.3.0-2cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-2 libatomic1-armhf-cross_8.3.0-2cross1 libattr1_1:2.4.48-4 libaudit-common_1:2.8.4-2 libaudit1_1:2.8.4-2 libauthen-sasl-perl_2.1600-1 libbinutils_2.31.1-15 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9 libc-bin_2.28-8 libc-dev-bin_2.28-8 libc6_2.28-8 libc6-armhf-cross_2.28-7cross1 libc6-dev_2.28-8 libc6-dev-armhf-cross_2.28-7cross1 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-2 libcom-err2_1.45.0-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libdata-dump-perl_1.23-1 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.248 libdebian-dpkgcross-perl_2.6.15-2 libdpkg-perl_1.19.5 libeatmydata1_105-7 libelf1_0.176-1 libencode-locale-perl_1.05-1 libexpat1_2.2.6-1 libext2fs2_1.45.0-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-listing-perl_6.04-1 libfile-stripnondeterminism-perl_1.1.1-1 libfile-which-perl_1.23-1 libfont-afm-perl_1.20-2 libgcc-8-dev_8.3.0-2 libgcc-8-dev-armhf-cross_8.3.0-2cross1 libgcc1_1:8.3.0-2 libgcc1-armhf-cross_1:8.3.0-2cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-3 libgdbm6_1.18.1-3 libglib2.0-0_2.58.3-1 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.6-2 libgomp1_8.3.0-2 libgomp1-armhf-cross_8.3.0-2cross1 libgpg-error0_1.35-1 libhogweed4_3.4.1-1 libhtml-form-perl_6.03-1 libhtml-format-perl_2.12-1 libhtml-parser-perl_3.72-3+b3 libhtml-tagset-perl_3.20-3 libhtml-tree-perl_5.07-2 libhttp-cookies-perl_6.04-1 libhttp-daemon-perl_6.01-3 libhttp-date-perl_6.02-1 libhttp-message-perl_6.18-1 libhttp-negotiate-perl_6.01-1 libicu63_63.1-6 libidn2-0_2.0.5-1 libio-html-perl_1.001-1 libio-socket-ssl-perl_2.060-3 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_8.3.0-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-2 liblwp-mediatypes-perl_6.02-1 liblwp-protocol-https-perl_6.07-2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-4 libmagic1_1:5.35-4 libmailtools-perl_2.18-1 libmariadb3_1:10.3.13-1 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libmpx2_8.3.0-2 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnet-http-perl_6.18-1 libnet-smtp-ssl-perl_1.04-1 libnet-ssleay-perl_1.85-2+b1 libnettle6_3.4.1-1 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpci-dev_1:3.5.2-1 libpci3_1:3.5.2-1 libpcre3_2:8.39-11 libperl5.28_5.28.1-4 libpipeline1_1.5.1-2 libprocps7_2:3.3.15-2 libpthread-stubs0-dev_0.4-1 libquadmath0_8.3.0-2 libreadline7_7.0-5 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsensors-config_1:3.5.0-3 libsensors4-dev_1:3.5.0-3 libsensors5_1:3.5.0-3 libsepol1_2.8-1 libsigsegv2_2.12-2 libsmartcols1_2.33.1-0.1 libsnmp-base_5.7.3+dfsg-5 libsnmp-dev_5.7.3+dfsg-5 libsnmp30_5.7.3+dfsg-5 libsqlite3-0_3.27.2-1 libss2_1.45.0-1 libssl-dev_1.1.1b-1 libssl1.1_1.1.1b-1 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.3.0-2cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.3.0-2cross1 libsystemd0_241-1 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtry-tiny-perl_0.30-1 libtsan0_8.3.0-2 libubsan1_8.3.0-2 libubsan1-armhf-cross_8.3.0-2cross1 libuchardet0_0.0.6-3 libudev-dev_241-1 libudev1_241-1 libunistring2_0.9.10-1 liburi-perl_1.76-1 libuuid1_2.33.1-0.1 libwrap0_7.6.q-28 libwrap0-dev_7.6.q-28 libwww-perl_6.36-1 libwww-robotrules-perl_6.02-1 libx11-6_2:1.6.7-1 libx11-data_2:1.6.7-1 libx11-dev_2:1.6.7-1 libxau-dev_1:1.0.8-1+b2 libxau6_1:1.0.8-1+b2 libxcb1_1.13.1-2 libxcb1-dev_1.13.1-2 libxdmcp-dev_1:1.1.2-3 libxdmcp6_1:1.1.2-3 libxext-dev_2:1.3.3-1+b2 libxext6_2:1.3.3-1+b2 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-parser-perl_2.44-4 libxml-sax-base-perl_1.09-1 libxml-sax-expat-perl_0.51-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libxpm-dev_1:3.5.12-1 libxpm4_1:3.5.12-1 libyaml-0-2_0.2.1-1 libyaml-libyaml-perl_0.76+repack-1 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.20-1 linux-libc-dev-armhf-cross_4.19.20-1cross1 login_1:4.5-1.1 lsb-base_10.2018112800 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mariadb-common_1:10.3.13-1 mawk_1.3.3-17+b3 mount_2.33.1-0.1 mysql-common_5.8+1.0.5 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 netbase_5.6 openssl_1.1.1b-1 passwd_1:4.5-1.1 patch_2.7.6-3 perl_5.28.1-4 perl-base_5.28.1-4 perl-modules-5.28_5.28.1-4 perl-openssl-defaults_3 pinentry-curses_1.1.0-1+b1 po-debconf_1.0.21 procps_2:3.3.15-2 readline-common_7.0-5 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-5 tzdata_2018i-2 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-runtime_2.33.1-0.1 x11proto-core-dev_2018.4-4 x11proto-dev_2018.4-4 x11proto-xext-dev_2018.4-4 xorg-sgml-doctools_1:1.11-1 xtrans-dev_1.3.5-1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1 zlib1g-dev_1:1.2.11.dfsg-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: wmnd Binary: wmnd, wmnd-snmp Architecture: any Version: 0.4.17-3 Maintainer: Robert Luberda Homepage: https://www.thregr.org/~wavexx/software/wmnd/ Standards-Version: 4.2.1 Vcs-Browser: https://salsa.debian.org/debian/wmnd/ Vcs-Git: https://salsa.debian.org/debian/wmnd.git Testsuite: autopkgtest Build-Depends: debhelper (>= 11), libsnmp-dev, libx11-dev, libxext-dev, libxpm-dev Package-List: wmnd deb net optional arch=any wmnd-snmp deb net optional arch=any Checksums-Sha1: 6e1ff0b83ab24bbe0158fa41073c49731eab5381 191089 wmnd_0.4.17.orig.tar.gz 18fbc46b7d0fed011c8f64d96798a9443b152268 13276 wmnd_0.4.17-3.debian.tar.xz Checksums-Sha256: 48a07a6bda6871832c38fbca7a17d27606a94ed632f373d9e42f8cfc785cb3aa 191089 wmnd_0.4.17.orig.tar.gz 15c91422e1ac111d1f7cb622304dd7ee77f8c53947a524fb53ac421b65172c5b 13276 wmnd_0.4.17-3.debian.tar.xz Files: dbf6d6c42ab3e036388d261d2e7bea16 191089 wmnd_0.4.17.orig.tar.gz 4414e8e980d310ee16c319c40fa34388 13276 wmnd_0.4.17-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEENeh2+rTTcy6TtNI3Yx3nVTvor9QFAluU8rgACgkQYx3nVTvo r9TNZA//YqvnkXas4wVxwpQL6XgRhcAhvPRF00+trZ44WWoMrE6EUeHK5wL8r1l0 wk2D/nGVHGyw8aaRhHoWfJkTbU+/Nn9BEpCZVTbvnJfn8gQa4xdKWoNOtRYwGJde WSDy9rVG7g1Ooa5qLcyPq4f3297A44gdd7D7/PFPy8DC00BAEN1j0/XI8R5XV3lc 0O+z0rR18ZG2TjBFnwKrjkQcoU5zjmXmMPsfjEuM28KK6oOeW0nfHGWjxhE1Wg8c ch9gIG4aq+/M8XQ5ACU8IsJeA3qq0UB/F40YbCy6Ww5N+1tKuKv9CHOSgiWAguxU KVoUyybCCNVp4LQUtVHuBa8Mya9B00mxNkx/UfWKkLk6LuacNXD6eo+cI3dVLB0X S5s1BXQaUBFrQOOSAesBs+ceyc18+CnGtrUGuk2zgBxKAoJPk3G8wA1yeTPhPloD mo6RS72mhHBObj/FOYxfMVEwSBK0XJ7xJwrLJDNPWGICAtKjOtNKQ1aRgeP+3b2o SWsuJ+c7x+UajFBSnUEJF04uHdHCRN2j1z/euPhp0bYbE2BSQxVygQQvJYidgllB XDWCb2pQ2GcArTox3ELdDN7uZDgRgNNR+gxK08DFdIyjVpWCD6oSHnRNRshHJ6cI fTADCzgRCFijS+uTdV8BMX5OZUiDcQDXbOYtARpdh/LCrSOBD9Y= =6nvD -----END PGP SIGNATURE----- gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sun Sep 9 10:15:20 2018 UTC gpgv: using RSA key 35E876FAB4D3732E93B4D237631DE7553BE8AFD4 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./wmnd_0.4.17-3.dsc dpkg-source: info: extracting wmnd in /<> dpkg-source: info: unpacking wmnd_0.4.17.orig.tar.gz dpkg-source: info: unpacking wmnd_0.4.17-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01-Fix-missing-HOME-crash.patch dpkg-source: info: applying 02-Make-counters-64-bit.patch dpkg-source: info: applying 03-Fix-compiler-warnings.patch Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf CCACHE_COMPRESS=1 CCACHE_DIR=/var/cache/ccache-sbuild CCACHE_UMASK=002 CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf DEB_BUILD_OPTIONS=nocheck HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=build PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=1000 SCHROOT_GROUP=build SCHROOT_SESSION_ID=unstable-amd64-sbuild-82f90ade-8a1d-4247-9e4b-790750ee8247 SCHROOT_UID=1000 SCHROOT_USER=build SHELL=/bin/sh USER=build dpkg-buildpackage ----------------- Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16 dpkg-buildpackage: info: source package wmnd dpkg-buildpackage: info: source version 0.4.17-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Robert Luberda dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh "clean" debian/rules override_dh_auto_clean make[1]: Entering directory '/<>' dh_auto_clean --verbose --buildsystem=autoconf --parallel --package="wmnd" --builddirectory="BUILD-wmnd" --tmpdir="debian/wmnd" -O --destdir="debian/wmnd" dh_auto_clean --verbose --buildsystem=autoconf --parallel --package="wmnd-snmp" --builddirectory="BUILD-wmnd-snmp" --tmpdir="debian/wmnd-snmp" -O --destdir="debian/wmnd-snmp" make[1]: Leaving directory '/<>' dh_clean debian/rules binary-arch dh "binary-arch" dh_update_autotools_config -a dh_autoreconf -a configure.ac:13: installing './compile' debian/rules override_dh_auto_configure make[1]: Entering directory '/<>' dh_auto_configure --verbose --buildsystem=autoconf --parallel --package="wmnd" --builddirectory="BUILD-wmnd" --tmpdir="debian/wmnd" -O --destdir="debian/wmnd" -- --enable-trend --docdir="\${prefix}/share/doc/wmnd" --enable-drivers="linux_proc solaris_fpppd" install -d BUILD-wmnd cd BUILD-wmnd && ../configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --host=arm-linux-gnueabihf --enable-trend --docdir=\${prefix}/share/doc/wmnd "--enable-drivers=linux_proc solaris_fpppd" configure: WARNING: unrecognized options: --disable-maintainer-mode configure: loading site script /etc/dpkg-cross/cross-config.armhf checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnueabihf checking target system type... arm-unknown-linux-gnueabihf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-gnueabihf-strip... arm-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for arm-linux-gnueabihf-gcc... arm-linux-gnueabihf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-linux-gnueabihf-gcc accepts -g... yes checking for arm-linux-gnueabihf-gcc option to accept ISO C89... none needed checking whether arm-linux-gnueabihf-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of arm-linux-gnueabihf-gcc... none checking how to run the C preprocessor... arm-linux-gnueabihf-gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking net/ppp_defs.h usability... yes checking net/ppp_defs.h presence... yes checking for net/ppp_defs.h... yes checking for u_int... yes checking whether strdup is declared... yes checking whether getopt is declared... yes checking for library containing sin... -lm checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... no checking for main in -lX11... yes checking for main in -lXext... yes checking for main in -lXpm... yes checking for pid_t... yes checking return type of signal handlers... void checking for size_t... yes configure: overriding driver autodetection: linux_proc solaris_fpppd checking for inline... inline checking size of unsigned int... (cached) 4 checking size of unsigned long... (cached) 4 checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-maintainer-mode configure: configuration: disable trend support: no enabled drivers: linux_proc solaris_fpppd testing_dummy enabled display modes: traditional mgraph waveform wmwave wmnet sepgraphs twisted charts needle lines dh_auto_configure --verbose --buildsystem=autoconf --parallel --package="wmnd-snmp" --builddirectory="BUILD-wmnd-snmp" --tmpdir="debian/wmnd-snmp" -O --destdir="debian/wmnd-snmp" -- --enable-trend --docdir="\${prefix}/share/doc/wmnd-snmp" --enable-drivers="linux_proc solaris_fpppd generic_snmp" LIBS=" -lsnmp" install -d BUILD-wmnd-snmp cd BUILD-wmnd-snmp && ../configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --host=arm-linux-gnueabihf --enable-trend --docdir=\${prefix}/share/doc/wmnd-snmp "--enable-drivers=linux_proc solaris_fpppd generic_snmp" "LIBS= -lsnmp" configure: WARNING: unrecognized options: --disable-maintainer-mode configure: loading site script /etc/dpkg-cross/cross-config.armhf checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnueabihf checking target system type... arm-unknown-linux-gnueabihf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-gnueabihf-strip... arm-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for arm-linux-gnueabihf-gcc... arm-linux-gnueabihf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-linux-gnueabihf-gcc accepts -g... yes checking for arm-linux-gnueabihf-gcc option to accept ISO C89... none needed checking whether arm-linux-gnueabihf-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of arm-linux-gnueabihf-gcc... none checking how to run the C preprocessor... arm-linux-gnueabihf-gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking net/ppp_defs.h usability... yes checking net/ppp_defs.h presence... yes checking for net/ppp_defs.h... yes checking for u_int... yes checking whether strdup is declared... yes checking whether getopt is declared... yes checking for library containing sin... -lm checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... no checking for main in -lX11... yes checking for main in -lXext... yes checking for main in -lXpm... yes checking for pid_t... yes checking return type of signal handlers... void checking for size_t... yes configure: overriding driver autodetection: linux_proc solaris_fpppd generic_snmp checking for inline... inline checking size of unsigned int... (cached) 4 checking size of unsigned long... (cached) 4 checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-maintainer-mode configure: configuration: disable trend support: no enabled drivers: linux_proc solaris_fpppd generic_snmp testing_dummy enabled display modes: traditional mgraph waveform wmwave wmnet sepgraphs twisted charts needle lines make[1]: Leaving directory '/<>' debian/rules override_dh_auto_build make[1]: Entering directory '/<>' dh_auto_build --verbose --buildsystem=autoconf --parallel --package="wmnd" --builddirectory="BUILD-wmnd" --tmpdir="debian/wmnd" -O --destdir="debian/wmnd" cd BUILD-wmnd && make -j16 make[2]: Entering directory '/<>/BUILD-wmnd' make all-recursive make[3]: Entering directory '/<>/BUILD-wmnd' Making all in src make[4]: Entering directory '/<>/BUILD-wmnd/src' arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o cfgdata.o ../../src/cfgdata.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o display.o ../../src/display.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o drivers.o ../../src/drivers.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o misc.o ../../src/misc.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o messages.o ../../src/messages.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o wmnd.o ../../src/wmnd.c arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o wmnd cfgdata.o display.o drivers.o misc.o messages.o wmnd.o -lXpm -lXext -lX11 -lm make[4]: Leaving directory '/<>/BUILD-wmnd/src' make[4]: Entering directory '/<>/BUILD-wmnd' make[4]: Leaving directory '/<>/BUILD-wmnd' make[3]: Leaving directory '/<>/BUILD-wmnd' make[2]: Leaving directory '/<>/BUILD-wmnd' dh_auto_build --verbose --buildsystem=autoconf --parallel --package="wmnd-snmp" --builddirectory="BUILD-wmnd-snmp" --tmpdir="debian/wmnd-snmp" -O --destdir="debian/wmnd-snmp" cd BUILD-wmnd-snmp && make -j16 make[2]: Entering directory '/<>/BUILD-wmnd-snmp' make all-recursive make[3]: Entering directory '/<>/BUILD-wmnd-snmp' Making all in src make[4]: Entering directory '/<>/BUILD-wmnd-snmp/src' arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o cfgdata.o ../../src/cfgdata.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o display.o ../../src/display.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o drivers.o ../../src/drivers.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o misc.o ../../src/misc.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o messages.o ../../src/messages.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o wmnd.o ../../src/wmnd.c arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o wmnd cfgdata.o display.o drivers.o misc.o messages.o wmnd.o -lXpm -lXext -lX11 -lm -lsnmp make[4]: Leaving directory '/<>/BUILD-wmnd-snmp/src' make[4]: Entering directory '/<>/BUILD-wmnd-snmp' make[4]: Leaving directory '/<>/BUILD-wmnd-snmp' make[3]: Leaving directory '/<>/BUILD-wmnd-snmp' make[2]: Leaving directory '/<>/BUILD-wmnd-snmp' make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp dh_testroot -a dh_prep -a debian/rules override_dh_auto_install make[1]: Entering directory '/<>' dh_auto_install --verbose --buildsystem=autoconf --parallel --package="wmnd" --builddirectory="BUILD-wmnd" --tmpdir="debian/wmnd" -O --destdir="debian/wmnd" install -d /<>/debian/wmnd cd BUILD-wmnd && make -j16 install DESTDIR=/<>/debian/wmnd AM_UPDATE_INFO_DIR=no make[2]: Entering directory '/<>/BUILD-wmnd' Making install in src make[3]: Entering directory '/<>/BUILD-wmnd/src' make[4]: Entering directory '/<>/BUILD-wmnd/src' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/<>/debian/wmnd/usr/bin' /usr/bin/install -c wmnd '/<>/debian/wmnd/usr/bin' make[4]: Leaving directory '/<>/BUILD-wmnd/src' make[3]: Leaving directory '/<>/BUILD-wmnd/src' make[3]: Entering directory '/<>/BUILD-wmnd' make[4]: Entering directory '/<>/BUILD-wmnd' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/<>/debian/wmnd/usr/share/doc/wmnd/examples' /bin/mkdir -p '/<>/debian/wmnd/usr/share/man/man1' /usr/bin/install -c -m 644 ../examples/wmndrc '/<>/debian/wmnd/usr/share/doc/wmnd/examples' /usr/bin/install -c -m 644 ../doc/wmnd.1 '/<>/debian/wmnd/usr/share/man/man1' make[4]: Leaving directory '/<>/BUILD-wmnd' make[3]: Leaving directory '/<>/BUILD-wmnd' make[2]: Leaving directory '/<>/BUILD-wmnd' dh_auto_install --verbose --buildsystem=autoconf --parallel --package="wmnd-snmp" --builddirectory="BUILD-wmnd-snmp" --tmpdir="debian/wmnd-snmp" -O --destdir="debian/wmnd-snmp" install -d /<>/debian/wmnd-snmp cd BUILD-wmnd-snmp && make -j16 install DESTDIR=/<>/debian/wmnd-snmp AM_UPDATE_INFO_DIR=no make[2]: Entering directory '/<>/BUILD-wmnd-snmp' Making install in src make[3]: Entering directory '/<>/BUILD-wmnd-snmp/src' make[4]: Entering directory '/<>/BUILD-wmnd-snmp/src' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/<>/debian/wmnd-snmp/usr/bin' /usr/bin/install -c wmnd '/<>/debian/wmnd-snmp/usr/bin' make[4]: Leaving directory '/<>/BUILD-wmnd-snmp/src' make[3]: Leaving directory '/<>/BUILD-wmnd-snmp/src' make[3]: Entering directory '/<>/BUILD-wmnd-snmp' make[4]: Entering directory '/<>/BUILD-wmnd-snmp' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/<>/debian/wmnd-snmp/usr/share/doc/wmnd-snmp/examples' /bin/mkdir -p '/<>/debian/wmnd-snmp/usr/share/man/man1' /usr/bin/install -c -m 644 ../examples/wmndrc '/<>/debian/wmnd-snmp/usr/share/doc/wmnd-snmp/examples' /usr/bin/install -c -m 644 ../doc/wmnd.1 '/<>/debian/wmnd-snmp/usr/share/man/man1' make[4]: Leaving directory '/<>/BUILD-wmnd-snmp' make[3]: Leaving directory '/<>/BUILD-wmnd-snmp' make[2]: Leaving directory '/<>/BUILD-wmnd-snmp' make[1]: Leaving directory '/<>' dh_installdocs -a dh_installchangelogs -a dh_installman -a dh_installmenu -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a dpkg-deb: building package 'wmnd' in '../wmnd_0.4.17-3_armhf.deb'. dpkg-deb: building package 'wmnd-dbgsym' in '../wmnd-dbgsym_0.4.17-3_armhf.deb'. dpkg-deb: building package 'wmnd-snmp' in '../wmnd-snmp_0.4.17-3_armhf.deb'. dpkg-deb: building package 'wmnd-snmp-dbgsym' in '../wmnd-snmp-dbgsym_0.4.17-3_armhf.deb'. dpkg-genbuildinfo --build=any dpkg-genchanges --build=any >../wmnd_0.4.17-3_armhf.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2019-03-07T12:04:20Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ wmnd_0.4.17-3_armhf.changes: ---------------------------- Format: 1.8 Date: Sun, 09 Sep 2018 12:08:13 +0200 Source: wmnd Binary: wmnd wmnd-dbgsym wmnd-snmp wmnd-snmp-dbgsym Built-For-Profiles: cross nocheck Architecture: armhf Version: 0.4.17-3 Distribution: unstable-amd64-sbuild Urgency: medium Maintainer: Robert Luberda Changed-By: Robert Luberda Description: wmnd - Dockapp monitoring network interfaces wmnd-snmp - Dockapp monitoring network interfaces with SNMP support Closes: 629252 Changes: wmnd (0.4.17-3) unstable; urgency=medium . * Switch to debhelper v11. * debian/rules: Enable all hardening and LFS flags. * Add 02-Make-counters-64-bit.patch from Vladimir Prodan to make byte/packet counters 64 bit on 32-bit systems (closes: #629252). * Add 03-Fix-compiler-warnings.patch to fix warnings generated by gcc-8. * Switch debian/copyright to DEP-5 format. * debian/watch: use https and check gpg signature (lintian). * Add DEP-12 upstream metadata file. * Provide simple testsuite for autopkgtest to check installability of the binary packages (lintian). * debian/control: + update Vcs-* fields for salsa migration; + use https protocol in the `Homepage' field; + suggest snmp-mips-downloader for wmnd-snmp package (see: #574388); + set `Rules-Requires-Root' to `no'; + Standards-Version: 4.2.1. Checksums-Sha1: 3748a97f1648c2af6f068f8c55f0c98e29fe3392 62596 wmnd-dbgsym_0.4.17-3_armhf.deb b74ba3cbc3af092825c57f9086321579b2c58fdb 70304 wmnd-snmp-dbgsym_0.4.17-3_armhf.deb b2780b67764d03aee08b2a276c541cb451f2fbbe 54208 wmnd-snmp_0.4.17-3_armhf.deb c6ba039bef8b07750073bd578ba86f2a7c6869bf 6234 wmnd_0.4.17-3_armhf.buildinfo 864fde682f88950ad72fbf5502c05c2ffc29e48c 52732 wmnd_0.4.17-3_armhf.deb Checksums-Sha256: c644ecf047d896c6ea96e244cb31d0c7140665bf846c71a85cce71a1231b4347 62596 wmnd-dbgsym_0.4.17-3_armhf.deb dec9851a0a2d9e049d48ebb6fb20937eb3402feff32867fd56593d580262bcfb 70304 wmnd-snmp-dbgsym_0.4.17-3_armhf.deb a2ab6d3206639e3cbe4e06c71a8832e24192ffe327049fc00c2450869b18c12b 54208 wmnd-snmp_0.4.17-3_armhf.deb b92b592141f6cbe449fccd3ab79dca7df73284d5a516bf352cf5b8e097a4bb88 6234 wmnd_0.4.17-3_armhf.buildinfo ad825c4ae6dba3d438176e7603ebd0d9d36568060ed41b8d031de193f3edbbc2 52732 wmnd_0.4.17-3_armhf.deb Files: 02062955cf1c0475a4cc303f0d5416e8 62596 debug optional wmnd-dbgsym_0.4.17-3_armhf.deb a1e906e749e60f11159eb127370a0d0e 70304 debug optional wmnd-snmp-dbgsym_0.4.17-3_armhf.deb 7d9dcfeeaef2cecabed8deb939598876 54208 net optional wmnd-snmp_0.4.17-3_armhf.deb 547d3a1c1350e2776e51b3f411f1a674 6234 net optional wmnd_0.4.17-3_armhf.buildinfo 4d4d43c4010ebcdec52f8cdcd1cd3c26 52732 net optional wmnd_0.4.17-3_armhf.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: wmnd Binary: wmnd wmnd-snmp Architecture: armhf Version: 0.4.17-3 Checksums-Md5: 02062955cf1c0475a4cc303f0d5416e8 62596 wmnd-dbgsym_0.4.17-3_armhf.deb a1e906e749e60f11159eb127370a0d0e 70304 wmnd-snmp-dbgsym_0.4.17-3_armhf.deb 7d9dcfeeaef2cecabed8deb939598876 54208 wmnd-snmp_0.4.17-3_armhf.deb 4d4d43c4010ebcdec52f8cdcd1cd3c26 52732 wmnd_0.4.17-3_armhf.deb Checksums-Sha1: 3748a97f1648c2af6f068f8c55f0c98e29fe3392 62596 wmnd-dbgsym_0.4.17-3_armhf.deb b74ba3cbc3af092825c57f9086321579b2c58fdb 70304 wmnd-snmp-dbgsym_0.4.17-3_armhf.deb b2780b67764d03aee08b2a276c541cb451f2fbbe 54208 wmnd-snmp_0.4.17-3_armhf.deb 864fde682f88950ad72fbf5502c05c2ffc29e48c 52732 wmnd_0.4.17-3_armhf.deb Checksums-Sha256: c644ecf047d896c6ea96e244cb31d0c7140665bf846c71a85cce71a1231b4347 62596 wmnd-dbgsym_0.4.17-3_armhf.deb dec9851a0a2d9e049d48ebb6fb20937eb3402feff32867fd56593d580262bcfb 70304 wmnd-snmp-dbgsym_0.4.17-3_armhf.deb a2ab6d3206639e3cbe4e06c71a8832e24192ffe327049fc00c2450869b18c12b 54208 wmnd-snmp_0.4.17-3_armhf.deb ad825c4ae6dba3d438176e7603ebd0d9d36568060ed41b8d031de193f3edbbc2 52732 wmnd_0.4.17-3_armhf.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Thu, 07 Mar 2019 12:04:19 +0000 Build-Path: /<> Installed-Build-Depends: autoconf (= 2.69-11), automake (= 1:1.16.1-4), autopoint (= 0.19.8.1-9), autotools-dev (= 20180224.1), base-files (= 10.1), base-passwd (= 3.5.46), bash (= 5.0-2), binutils (= 2.31.1-15), binutils-common (= 2.31.1-15), binutils-x86-64-linux-gnu (= 2.31.1-15), bsdmainutils (= 11.1.2+b1), bsdutils (= 1:2.33.1-0.1), build-essential (= 12.6), bzip2 (= 1.0.6-9), coreutils (= 8.30-3), cpp (= 4:8.3.0-1), cpp-8 (= 8.3.0-2), dash (= 0.5.10.2-5), debconf (= 1.5.71), debhelper (= 12.1.1), debianutils (= 4.8.6.1), dh-autoreconf (= 19), dh-strip-nondeterminism (= 1.1.1-1), diffutils (= 1:3.7-2), dpkg (= 1.19.5), dpkg-dev (= 1.19.5), dwz (= 0.12-3), fdisk (= 2.33.1-0.1), file (= 1:5.35-4), findutils (= 4.6.0+git+20190209-2), g++ (= 4:8.3.0-1), g++-8 (= 8.3.0-2), gcc (= 4:8.3.0-1), gcc-8 (= 8.3.0-2), gcc-8-base (= 8.3.0-2), gettext (= 0.19.8.1-9), gettext-base (= 0.19.8.1-9), grep (= 3.3-1), groff-base (= 1.22.4-3), gzip (= 1.9-3), hostname (= 3.21), init-system-helpers (= 1.56+nmu1), intltool-debian (= 0.35.0+20060710.5), libacl1 (= 2.2.53-4), libarchive-zip-perl (= 1.64-1), libasan5 (= 8.3.0-2), libatomic1 (= 8.3.0-2), libattr1 (= 1:2.4.48-4), libaudit-common (= 1:2.8.4-2), libaudit1 (= 1:2.8.4-2), libbinutils (= 2.31.1-15), libblkid1 (= 2.33.1-0.1), libbsd0 (= 0.9.1-2), libbz2-1.0 (= 1.0.6-9), libc-bin (= 2.28-8), libc-dev-bin (= 2.28-8), libc6 (= 2.28-8), libc6-dev (= 2.28-8), libcap-ng0 (= 0.7.9-2), libcc1-0 (= 8.3.0-2), libcroco3 (= 0.6.12-3), libdb5.3 (= 5.3.28+dfsg1-0.5), libdebconfclient0 (= 0.248), libdpkg-perl (= 1.19.5), libelf1 (= 0.176-1), libfdisk1 (= 2.33.1-0.1), libffi6 (= 3.2.1-9), libfile-stripnondeterminism-perl (= 1.1.1-1), libgcc-8-dev (= 8.3.0-2), libgcc1 (= 1:8.3.0-2), libgcrypt20 (= 1.8.4-5), libgdbm-compat4 (= 1.18.1-3), libgdbm6 (= 1.18.1-3), libglib2.0-0 (= 2.58.3-1), libgmp10 (= 2:6.1.2+dfsg-4), libgnutls30 (= 3.6.6-2), libgomp1 (= 8.3.0-2), libgpg-error0 (= 1.35-1), libhogweed4 (= 3.4.1-1), libicu63 (= 63.1-6), libidn2-0 (= 2.0.5-1), libisl19 (= 0.20-2), libitm1 (= 8.3.0-2), liblsan0 (= 8.3.0-2), liblz4-1 (= 1.8.3-1), liblzma5 (= 5.2.4-1), libmagic-mgc (= 1:5.35-4), libmagic1 (= 1:5.35-4), libmariadb3 (= 1:10.3.13-1), libmount1 (= 2.33.1-0.1), libmpc3 (= 1.1.0-1), libmpfr6 (= 4.0.2-1), libmpx2 (= 8.3.0-2), libncurses6 (= 6.1+20181013-2), libncursesw6 (= 6.1+20181013-2), libnettle6 (= 3.4.1-1), libp11-kit0 (= 0.23.15-2), libpam-modules (= 1.3.1-5), libpam-modules-bin (= 1.3.1-5), libpam-runtime (= 1.3.1-5), libpam0g (= 1.3.1-5), libpci-dev (= 1:3.5.2-1), libpci3 (= 1:3.5.2-1), libpcre3 (= 2:8.39-11), libperl5.28 (= 5.28.1-4), libpipeline1 (= 1.5.1-2), libprocps7 (= 2:3.3.15-2), libpthread-stubs0-dev (= 0.4-1), libquadmath0 (= 8.3.0-2), libseccomp2 (= 2.3.3-4), libselinux1 (= 2.8-1+b1), libsensors-config (= 1:3.5.0-3), libsensors4-dev (= 1:3.5.0-3), libsensors5 (= 1:3.5.0-3), libsigsegv2 (= 2.12-2), libsmartcols1 (= 2.33.1-0.1), libsnmp-base (= 5.7.3+dfsg-5), libsnmp-dev (= 5.7.3+dfsg-5), libsnmp30 (= 5.7.3+dfsg-5), libssl-dev (= 1.1.1b-1), libssl1.1 (= 1.1.1b-1), libstdc++-8-dev (= 8.3.0-2), libstdc++6 (= 8.3.0-2), libsystemd0 (= 241-1), libtasn1-6 (= 4.13-3), libtinfo6 (= 6.1+20181013-2), libtool (= 2.4.6-10), libtsan0 (= 8.3.0-2), libubsan1 (= 8.3.0-2), libuchardet0 (= 0.0.6-3), libudev-dev (= 241-1), libudev1 (= 241-1), libunistring2 (= 0.9.10-1), libuuid1 (= 2.33.1-0.1), libwrap0 (= 7.6.q-28), libwrap0-dev (= 7.6.q-28), libx11-6 (= 2:1.6.7-1), libx11-data (= 2:1.6.7-1), libx11-dev (= 2:1.6.7-1), libxau-dev (= 1:1.0.8-1+b2), libxau6 (= 1:1.0.8-1+b2), libxcb1 (= 1.13.1-2), libxcb1-dev (= 1.13.1-2), libxdmcp-dev (= 1:1.1.2-3), libxdmcp6 (= 1:1.1.2-3), libxext-dev (= 2:1.3.3-1+b2), libxext6 (= 2:1.3.3-1+b2), libxml2 (= 2.9.4+dfsg1-7+b3), libxpm-dev (= 1:3.5.12-1), libxpm4 (= 1:3.5.12-1), linux-libc-dev (= 4.19.20-1), login (= 1:4.5-1.1), lsb-base (= 10.2018112800), m4 (= 1.4.18-2), make (= 4.2.1-1.2), man-db (= 2.8.5-2), mariadb-common (= 1:10.3.13-1), mawk (= 1.3.3-17+b3), mysql-common (= 5.8+1.0.5), ncurses-base (= 6.1+20181013-2), ncurses-bin (= 6.1+20181013-2), patch (= 2.7.6-3), perl (= 5.28.1-4), perl-base (= 5.28.1-4), perl-modules-5.28 (= 5.28.1-4), po-debconf (= 1.0.21), procps (= 2:3.3.15-2), sed (= 4.7-1), sensible-utils (= 0.0.12), sysvinit-utils (= 2.93-8), tar (= 1.30+dfsg-5), util-linux (= 2.33.1-0.1), x11proto-core-dev (= 2018.4-4), x11proto-dev (= 2018.4-4), x11proto-xext-dev (= 2018.4-4), xorg-sgml-doctools (= 1:1.11-1), xtrans-dev (= 1.3.5-1), xz-utils (= 5.2.4-1), zlib1g (= 1:1.2.11.dfsg-1), zlib1g-dev (= 1:1.2.11.dfsg-1) Environment: DEB_BUILD_OPTIONS="nocheck parallel=16" DEB_BUILD_PROFILES="cross nocheck" LANG="en_US.UTF-8" LC_ALL="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" MAKEFLAGS=" -j16" SOURCE_DATE_EPOCH="1536487693" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ wmnd-dbgsym_0.4.17-3_armhf.deb ------------------------------ new Debian package, version 2.0. size 62596 bytes: control archive=508 bytes. 321 bytes, 12 lines control 106 bytes, 1 lines md5sums Package: wmnd-dbgsym Source: wmnd Version: 0.4.17-3 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Robert Luberda Installed-Size: 80 Depends: wmnd (= 0.4.17-3) Section: debug Priority: optional Description: debug symbols for wmnd Build-Ids: df2183eb7dbf3f78c34fcada54daadd3292d7857 drwxr-xr-x root/root 0 2018-09-09 10:08 ./ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/lib/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/lib/debug/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/lib/debug/.build-id/df/ -rw-r--r-- root/root 71268 2018-09-09 10:08 ./usr/lib/debug/.build-id/df/2183eb7dbf3f78c34fcada54daadd3292d7857.debug drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/doc/ lrwxrwxrwx root/root 0 2018-09-09 10:08 ./usr/share/doc/wmnd-dbgsym -> wmnd wmnd-snmp-dbgsym_0.4.17-3_armhf.deb ----------------------------------- new Debian package, version 2.0. size 70304 bytes: control archive=512 bytes. 336 bytes, 12 lines control 106 bytes, 1 lines md5sums Package: wmnd-snmp-dbgsym Source: wmnd Version: 0.4.17-3 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Robert Luberda Installed-Size: 88 Depends: wmnd-snmp (= 0.4.17-3) Section: debug Priority: optional Description: debug symbols for wmnd-snmp Build-Ids: 4882310ce34ed4bb7626ce842685aeb1ff1dccd3 drwxr-xr-x root/root 0 2018-09-09 10:08 ./ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/lib/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/lib/debug/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/lib/debug/.build-id/48/ -rw-r--r-- root/root 79680 2018-09-09 10:08 ./usr/lib/debug/.build-id/48/82310ce34ed4bb7626ce842685aeb1ff1dccd3.debug drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/doc/ lrwxrwxrwx root/root 0 2018-09-09 10:08 ./usr/share/doc/wmnd-snmp-dbgsym -> wmnd-snmp wmnd-snmp_0.4.17-3_armhf.deb ---------------------------- new Debian package, version 2.0. size 54208 bytes: control archive=1320 bytes. 785 bytes, 22 lines control 788 bytes, 12 lines md5sums 192 bytes, 7 lines * postinst #!/bin/sh 167 bytes, 5 lines * postrm #!/bin/sh Package: wmnd-snmp Source: wmnd Version: 0.4.17-3 Architecture: armhf Maintainer: Robert Luberda Installed-Size: 108 Depends: libc6 (>= 2.7), libsnmp30 (>= 5.7.3+dfsg), libx11-6, libxext6, libxpm4 Suggests: snmp-mibs-downloader, trend Conflicts: wmnd Replaces: wmnd Section: net Priority: optional Homepage: https://www.thregr.org/~wavexx/software/wmnd/ Description: Dockapp monitoring network interfaces with SNMP support Shows a graph of incoming/outgoing traffic, activity indicators for rx/tx and current/maximum rate for rx/tx in bytes or packets. . The SNMP input driver can use any IF-MIB compliant data source such as most routers and managed switches. . Tailored for use with WindowMaker, it will as well work with any other window manager though. drwxr-xr-x root/root 0 2018-09-09 10:08 ./ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/bin/ -rwxr-xr-x root/root 55844 2018-09-09 10:08 ./usr/bin/wmnd drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/doc/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/doc/wmnd-snmp/ -rw-r--r-- root/root 347 2009-08-10 11:15 ./usr/share/doc/wmnd-snmp/AUTHORS -rw-r--r-- root/root 2634 2012-06-14 13:24 ./usr/share/doc/wmnd-snmp/NEWS.gz -rw-r--r-- root/root 5712 2012-01-23 10:10 ./usr/share/doc/wmnd-snmp/README.gz -rw-r--r-- root/root 1238 2012-01-23 10:10 ./usr/share/doc/wmnd-snmp/THANKS -rw-r--r-- root/root 370 2009-08-10 11:15 ./usr/share/doc/wmnd-snmp/TODO -rw-r--r-- root/root 3823 2018-09-09 10:08 ./usr/share/doc/wmnd-snmp/changelog.Debian.gz -rw-r--r-- root/root 11692 2012-06-14 15:08 ./usr/share/doc/wmnd-snmp/changelog.gz -rw-r--r-- root/root 1571 2018-09-09 10:08 ./usr/share/doc/wmnd-snmp/copyright drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/doc/wmnd-snmp/examples/ -rw-r--r-- root/root 3375 2018-09-09 10:08 ./usr/share/doc/wmnd-snmp/examples/wmndrc drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/man/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/man/man1/ -rw-r--r-- root/root 3207 2018-09-09 10:08 ./usr/share/man/man1/wmnd.1.gz drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/menu/ -rw-r--r-- root/root 161 2018-09-09 10:08 ./usr/share/menu/wmnd-snmp wmnd_0.4.17-3_armhf.deb ----------------------- new Debian package, version 2.0. size 52732 bytes: control archive=1208 bytes. 599 bytes, 18 lines control 738 bytes, 12 lines md5sums 192 bytes, 7 lines * postinst #!/bin/sh 167 bytes, 5 lines * postrm #!/bin/sh Package: wmnd Version: 0.4.17-3 Architecture: armhf Maintainer: Robert Luberda Installed-Size: 104 Depends: libc6 (>= 2.7), libx11-6, libxext6, libxpm4 Suggests: trend Conflicts: wmnd-snmp Replaces: wmnd-snmp Section: net Priority: optional Homepage: https://www.thregr.org/~wavexx/software/wmnd/ Description: Dockapp monitoring network interfaces Shows a graph of incoming/outgoing traffic, activity indicators for rx/tx and current/maximum rate for rx/tx in bytes or packets. . Tailored for use with WindowMaker, it will as well work with any other window manager though. drwxr-xr-x root/root 0 2018-09-09 10:08 ./ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/bin/ -rwxr-xr-x root/root 51720 2018-09-09 10:08 ./usr/bin/wmnd drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/doc/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/doc/wmnd/ -rw-r--r-- root/root 347 2009-08-10 11:15 ./usr/share/doc/wmnd/AUTHORS -rw-r--r-- root/root 2634 2012-06-14 13:24 ./usr/share/doc/wmnd/NEWS.gz -rw-r--r-- root/root 5712 2012-01-23 10:10 ./usr/share/doc/wmnd/README.gz -rw-r--r-- root/root 1238 2012-01-23 10:10 ./usr/share/doc/wmnd/THANKS -rw-r--r-- root/root 370 2009-08-10 11:15 ./usr/share/doc/wmnd/TODO -rw-r--r-- root/root 3823 2018-09-09 10:08 ./usr/share/doc/wmnd/changelog.Debian.gz -rw-r--r-- root/root 11692 2012-06-14 15:08 ./usr/share/doc/wmnd/changelog.gz -rw-r--r-- root/root 1571 2018-09-09 10:08 ./usr/share/doc/wmnd/copyright drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/doc/wmnd/examples/ -rw-r--r-- root/root 3375 2018-09-09 10:08 ./usr/share/doc/wmnd/examples/wmndrc drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/man/ drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/man/man1/ -rw-r--r-- root/root 3207 2018-09-09 10:08 ./usr/share/man/man1/wmnd.1.gz drwxr-xr-x root/root 0 2018-09-09 10:08 ./usr/share/menu/ -rw-r--r-- root/root 156 2018-09-09 10:08 ./usr/share/menu/wmnd lintian ------- Setup apt archive ----------------- Merged Build-Depends: lintian:amd64 Filtered Build-Depends: lintian:amd64 dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<>/apt_archive/sbuild-build-depends-lintian-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [963 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [546 B] Get:5 copy:/<>/apt_archive ./ Packages [634 B] Fetched 2143 B in 0s (175 kB/s) Reading package lists... Reading package lists... Install lintian build dependencies (apt-based resolver) ------------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils t1utils Suggested packages: libhtml-template-perl binutils-multiarch libtext-template-perl Recommended packages: libcgi-fast-perl libasync-mergepoint-perl libsereal-perl libtest-fatal-perl libtest-refcount-perl libdigest-bubblebabble-perl libnet-dns-sec-perl libnet-libidn-perl libunicode-utf8-perl libperlio-gzip-perl The following NEW packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils sbuild-build-depends-lintian-dummy:armhf t1utils 0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded. Need to get 2847 kB/2971 kB of archives. After this operation, 9356 kB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [848 B] Get:2 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libapt-pkg-perl amd64 0.1.34+b1 [71.2 kB] Get:3 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB] Get:4 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libcgi-pm-perl all 4.40-1 [222 kB] Get:5 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB] Get:6 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB] Get:7 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB] Get:8 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB] Get:9 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB] Get:10 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-dns-perl all 1.19-1 [372 kB] Get:11 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB] Get:12 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB] Get:13 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB] Get:14 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB] Get:15 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB] Get:16 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libfuture-perl all 0.39-1 [74.5 kB] Get:17 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB] Get:18 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libio-async-perl all 0.72-1 [262 kB] Get:19 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB] Get:20 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libipc-run-perl all 20180523.0-1 [101 kB] Get:21 http://cdn-fastly.deb.debian.org/debian sid/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB] Get:22 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB] Get:23 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB] Get:24 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB] Get:25 http://cdn-fastly.deb.debian.org/debian sid/main amd64 t1utils amd64 1.41-3 [62.3 kB] Get:26 http://cdn-fastly.deb.debian.org/debian sid/main amd64 lintian all 2.9.1 [1193 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2847 kB in 13s (219 kB/s) Selecting previously unselected package diffstat. (Reading database ... 21273 files and directories currently installed.) Preparing to unpack .../00-diffstat_1.62-1_amd64.deb ... Unpacking diffstat (1.62-1) ... Selecting previously unselected package libapt-pkg-perl. Preparing to unpack .../01-libapt-pkg-perl_0.1.34+b1_amd64.deb ... Unpacking libapt-pkg-perl (0.1.34+b1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../02-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../03-libcgi-pm-perl_4.40-1_all.deb ... Unpacking libcgi-pm-perl (4.40-1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../04-libsub-name-perl_0.21-1+b3_amd64.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libclass-accessor-perl. Preparing to unpack .../05-libclass-accessor-perl_0.51-1_all.deb ... Unpacking libclass-accessor-perl (0.51-1) ... Selecting previously unselected package libclone-perl. Preparing to unpack .../06-libclone-perl_0.41-1+b1_amd64.deb ... Unpacking libclone-perl (0.41-1+b1) ... Selecting previously unselected package libdigest-hmac-perl. Preparing to unpack .../07-libdigest-hmac-perl_1.03+dfsg-2_all.deb ... Unpacking libdigest-hmac-perl (1.03+dfsg-2) ... Selecting previously unselected package libnet-ip-perl. Preparing to unpack .../08-libnet-ip-perl_1.26-2_all.deb ... Unpacking libnet-ip-perl (1.26-2) ... Selecting previously unselected package libnet-dns-perl. Preparing to unpack .../09-libnet-dns-perl_1.19-1_all.deb ... Unpacking libnet-dns-perl (1.19-1) ... Selecting previously unselected package libnet-domain-tld-perl. Preparing to unpack .../10-libnet-domain-tld-perl_1.75-1_all.deb ... Unpacking libnet-domain-tld-perl (1.75-1) ... Selecting previously unselected package libemail-valid-perl. Preparing to unpack .../11-libemail-valid-perl_1.202-1_all.deb ... Unpacking libemail-valid-perl (1.202-1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../12-libexporter-tiny-perl_1.002001-1_all.deb ... Unpacking libexporter-tiny-perl (1.002001-1) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../13-libipc-system-simple-perl_1.25-4_all.deb ... Unpacking libipc-system-simple-perl (1.25-4) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../14-libfile-basedir-perl_0.08-1_all.deb ... Unpacking libfile-basedir-perl (0.08-1) ... Selecting previously unselected package libfuture-perl. Preparing to unpack .../15-libfuture-perl_0.39-1_all.deb ... Unpacking libfuture-perl (0.39-1) ... Selecting previously unselected package libstruct-dumb-perl. Preparing to unpack .../16-libstruct-dumb-perl_0.09-1_all.deb ... Unpacking libstruct-dumb-perl (0.09-1) ... Selecting previously unselected package libio-async-perl. Preparing to unpack .../17-libio-async-perl_0.72-1_all.deb ... Unpacking libio-async-perl (0.72-1) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../18-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ... Unpacking libio-pty-perl (1:1.08-1.1+b5) ... Selecting previously unselected package libipc-run-perl. Preparing to unpack .../19-libipc-run-perl_20180523.0-1_all.deb ... Unpacking libipc-run-perl (20180523.0-1) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../20-liblist-moreutils-perl_0.416-1+b4_amd64.deb ... Unpacking liblist-moreutils-perl (0.416-1+b4) ... Selecting previously unselected package libparse-debianchangelog-perl. Preparing to unpack .../21-libparse-debianchangelog-perl_1.2.0-13_all.deb ... Unpacking libparse-debianchangelog-perl (1.2.0-13) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../22-libpath-tiny-perl_0.108-1_all.deb ... Unpacking libpath-tiny-perl (0.108-1) ... Selecting previously unselected package libtext-levenshtein-perl. Preparing to unpack .../23-libtext-levenshtein-perl_0.13-1_all.deb ... Unpacking libtext-levenshtein-perl (0.13-1) ... Selecting previously unselected package patchutils. Preparing to unpack .../24-patchutils_0.3.4-2_amd64.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package t1utils. Preparing to unpack .../25-t1utils_1.41-3_amd64.deb ... Unpacking t1utils (1.41-3) ... Selecting previously unselected package lintian. Preparing to unpack .../26-lintian_2.9.1_all.deb ... Unpacking lintian (2.9.1) ... Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf. Preparing to unpack .../27-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Setting up libapt-pkg-perl (0.1.34+b1) ... Setting up libstruct-dumb-perl (0.09-1) ... Setting up libio-pty-perl (1:1.08-1.1+b5) ... Setting up libclone-perl (0.41-1+b1) ... Setting up libfuture-perl (0.39-1) ... Setting up libcgi-pm-perl (4.40-1) ... Setting up libtext-levenshtein-perl (0.13-1) ... Setting up libio-async-perl (0.72-1) ... Setting up patchutils (0.3.4-2) ... Setting up libdigest-hmac-perl (1.03+dfsg-2) ... Setting up libipc-system-simple-perl (1.25-4) ... Setting up libnet-domain-tld-perl (1.75-1) ... Setting up t1utils (1.41-3) ... Setting up diffstat (1.62-1) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up libpath-tiny-perl (0.108-1) ... Setting up libexporter-tiny-perl (1.002001-1) ... Setting up libclass-accessor-perl (0.51-1) ... Setting up libnet-ip-perl (1.26-2) ... Setting up libfile-basedir-perl (0.08-1) ... Setting up liblist-moreutils-perl (0.416-1+b4) ... Setting up libnet-dns-perl (1.19-1) ... Setting up libparse-debianchangelog-perl (1.2.0-13) ... Setting up libemail-valid-perl (1.202-1) ... Setting up lintian (2.9.1) ... Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Processing triggers for man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. W: wmnd source: orig-tarball-missing-upstream-signature wmnd_0.4.17.orig.tar.gz N: 1 tag overridden (1 warning) I: Lintian run was successful. +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following packages will be REMOVED: autoconf* automake* autopoint* autotools-dev* bsdmainutils* debhelper* dh-autoreconf* dh-strip-nondeterminism* diffstat* dwz* gcc-8-base:armhf* gettext* gettext-base* groff-base* intltool-debian* libapt-pkg-perl* libarchive-zip-perl* libasan5:armhf* libatomic1:armhf* libbsd0* libbsd0:armhf* libbz2-1.0:armhf* libc6:armhf* libc6-dev:armhf* libcapture-tiny-perl* libcgi-pm-perl* libclass-accessor-perl* libclone-perl* libcroco3* libdb5.3:armhf* libdigest-hmac-perl* libelf1* libemail-valid-perl* libexporter-tiny-perl* libffi6:armhf* libfile-basedir-perl* libfile-stripnondeterminism-perl* libfuture-perl* libgcc-8-dev:armhf* libgcc1:armhf* libgdbm-compat4:armhf* libgdbm6:armhf* libglib2.0-0* libgmp10:armhf* libgnutls30:armhf* libgomp1:armhf* libhogweed4:armhf* libidn2-0:armhf* libio-async-perl* libio-pty-perl* libipc-run-perl* libipc-system-simple-perl* liblist-moreutils-perl* libmariadb3:armhf* libncurses6* libnet-dns-perl* libnet-domain-tld-perl* libnet-ip-perl* libnettle6:armhf* libp11-kit0:armhf* libparse-debianchangelog-perl* libpath-tiny-perl* libpci-dev:armhf* libpci3:armhf* libperl5.28:armhf* libpipeline1* libprocps7* libpthread-stubs0-dev:armhf* libsensors-config* libsensors4-dev:armhf* libsensors5:armhf* libsigsegv2* libsnmp-base* libsnmp-dev:armhf* libsnmp30:armhf* libssl-dev:armhf* libssl1.1:armhf* libstdc++-8-dev:armhf* libstdc++6:armhf* libstruct-dumb-perl* libsub-name-perl* libtasn1-6:armhf* libtext-levenshtein-perl* libtool* libubsan1:armhf* libuchardet0* libudev-dev:armhf* libudev1:armhf* libunistring2:armhf* libwrap0:armhf* libwrap0-dev:armhf* libx11-6:armhf* libx11-data* libx11-dev:armhf* libxau-dev:armhf* libxau6:armhf* libxcb1:armhf* libxcb1-dev:armhf* libxdmcp-dev:armhf* libxdmcp6:armhf* libxext-dev:armhf* libxext6:armhf* libxpm-dev:armhf* libxpm4:armhf* lintian* linux-libc-dev:armhf* m4* man-db* mariadb-common* mysql-common* patchutils* po-debconf* procps* sbuild-build-depends-lintian-dummy:armhf* sbuild-build-depends-main-dummy:armhf* t1utils* x11proto-core-dev* x11proto-dev* x11proto-xext-dev* xorg-sgml-doctools* xtrans-dev* zlib1g:armhf* zlib1g-dev:armhf* 0 upgraded, 0 newly installed, 123 to remove and 0 not upgraded. After this operation, 146 MB disk space will be freed. (Reading database ... 22551 files and directories currently installed.) Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Removing lintian (2.9.1) ... Removing diffstat (1.62-1) ... Removing libstdc++-8-dev:armhf (8.3.0-2) ... Removing libgcc-8-dev:armhf (8.3.0-2) ... Removing libubsan1:armhf (8.3.0-2) ... Removing libsnmp-dev:armhf (5.7.3+dfsg-5) ... Removing libsnmp30:armhf (5.7.3+dfsg-5) ... Removing libmariadb3:armhf (1:10.3.13-1) ... Removing libapt-pkg-perl (0.1.34+b1) ... Removing libasan5:armhf (8.3.0-2) ... Removing libatomic1:armhf (8.3.0-2) ... Removing libxpm-dev:armhf (1:3.5.12-1) ... Removing libxext-dev:armhf (2:1.3.3-1+b2) ... Removing libx11-dev:armhf (2:1.6.7-1) ... Removing libxcb1-dev:armhf (1.13.1-2) ... Removing libxdmcp-dev:armhf (1:1.1.2-3) ... Removing libxpm4:armhf (1:3.5.12-1) ... Removing libperl5.28:armhf (5.28.1-4) ... Removing libbz2-1.0:armhf (1.0.6-9) ... Removing libpci-dev:armhf (1:3.5.2-1) ... Removing zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Removing libpci3:armhf (1:3.5.2-1) ... Removing zlib1g:armhf (1:1.2.11.dfsg-1) ... Removing libwrap0-dev:armhf (7.6.q-28) ... Removing libwrap0:armhf (7.6.q-28) ... Removing libc6-dev:armhf (2.28-8) ... Removing libcapture-tiny-perl (0.48-1) ... Removing libparse-debianchangelog-perl (1.2.0-13) ... Removing libcgi-pm-perl (4.40-1) ... Removing libclass-accessor-perl (0.51-1) ... Removing libclone-perl (0.41-1+b1) ... Removing libdb5.3:armhf (5.3.28+dfsg1-0.5) ... Removing libemail-valid-perl (1.202-1) ... Removing libnet-dns-perl (1.19-1) ... Removing libdigest-hmac-perl (1.03+dfsg-2) ... Removing liblist-moreutils-perl (0.416-1+b4) ... Removing libexporter-tiny-perl (1.002001-1) ... Removing libgnutls30:armhf (3.6.6-2) ... Removing libp11-kit0:armhf (0.23.15-2) ... Removing libffi6:armhf (3.2.1-9) ... Removing libfile-basedir-perl (0.08-1) ... Removing libio-async-perl (0.72-1) ... Removing libfuture-perl (0.39-1) ... Removing libgdbm-compat4:armhf (1.18.1-3) ... Removing libgdbm6:armhf (1.18.1-3) ... Removing libhogweed4:armhf (3.4.1-1) ... Removing libgmp10:armhf (2:6.1.2+dfsg-4) ... Removing libgomp1:armhf (8.3.0-2) ... Removing libidn2-0:armhf (2.0.5-1) ... Removing libipc-run-perl (20180523.0-1) ... Removing libio-pty-perl (1:1.08-1.1+b5) ... Removing libipc-system-simple-perl (1.25-4) ... Removing procps (2:3.3.15-2) ... Removing libnet-domain-tld-perl (1.75-1) ... Removing libnet-ip-perl (1.26-2) ... Removing libnettle6:armhf (3.4.1-1) ... Removing libpath-tiny-perl (0.108-1) ... Removing libprocps7:amd64 (2:3.3.15-2) ... Removing libpthread-stubs0-dev:armhf (0.4-1) ... Removing libsensors4-dev:armhf (1:3.5.0-3) ... Removing libsensors5:armhf (1:3.5.0-3) ... Removing libsensors-config (1:3.5.0-3) ... Removing libsnmp-base (5.7.3+dfsg-5) ... Removing libssl-dev:armhf (1.1.1b-1) ... Removing libssl1.1:armhf (1.1.1b-1) ... Removing libstruct-dumb-perl (0.09-1) ... Removing libsub-name-perl (0.21-1+b3) ... Removing libtasn1-6:armhf (4.13-3) ... Removing libtext-levenshtein-perl (0.13-1) ... Removing libudev-dev:armhf (241-1) ... Removing libudev1:armhf (241-1) ... Removing libunistring2:armhf (0.9.10-1) ... Removing libxau-dev:armhf (1:1.0.8-1+b2) ... Removing libxext6:armhf (2:1.3.3-1+b2) ... Removing linux-libc-dev:armhf (4.19.20-1) ... Removing mariadb-common (1:10.3.13-1) ... update-alternatives: using /etc/mysql/my.cnf.fallback to provide /etc/mysql/my.cnf (my.cnf) in auto mode Removing mysql-common (5.8+1.0.5) ... Removing patchutils (0.3.4-2) ... Removing t1utils (1.41-3) ... Removing x11proto-core-dev (2018.4-4) ... Removing x11proto-xext-dev (2018.4-4) ... Removing x11proto-dev (2018.4-4) ... Removing xorg-sgml-doctools (1:1.11-1) ... Removing xtrans-dev (1.3.5-1) ... Removing libstdc++6:armhf (8.3.0-2) ... Removing libx11-6:armhf (2:1.6.7-1) ... Removing libxcb1:armhf (1.13.1-2) ... Removing libxdmcp6:armhf (1:1.1.2-3) ... Removing libbsd0:armhf (0.9.1-2) ... Removing libx11-data (2:1.6.7-1) ... Removing libxau6:armhf (1:1.0.8-1+b2) ... Removing libgcc1:armhf (1:8.3.0-2) ... Removing debhelper (12.1.1) ... Removing dh-strip-nondeterminism (1.1.1-1) ... Removing man-db (2.8.5-2) ... Removing bsdmainutils (11.1.2+b1) ... Removing dwz (0.12-3) ... Removing gcc-8-base:armhf (8.3.0-2) ... Removing po-debconf (1.0.21) ... Removing intltool-debian (0.35.0+20060710.5) ... Removing gettext (0.19.8.1-9) ... Removing gettext-base (0.19.8.1-9) ... Removing groff-base (1.22.4-3) ... Removing libfile-stripnondeterminism-perl (1.1.1-1) ... Removing libarchive-zip-perl (1.64-1) ... Removing libbsd0:amd64 (0.9.1-2) ... Removing libc6:armhf (2.28-8) ... Removing libcroco3:amd64 (0.6.12-3) ... Removing libelf1:amd64 (0.176-1) ... Removing libglib2.0-0:amd64 (2.58.3-1) ... Removing libncurses6:amd64 (6.1+20181013-2) ... Removing libpipeline1:amd64 (1.5.1-2) ... Removing libuchardet0:amd64 (0.0.6-3) ... Removing dh-autoreconf (19) ... Removing automake (1:1.16.1-4) ... Removing autoconf (2.69-11) ... Removing autopoint (0.19.8.1-9) ... Removing libtool (2.4.6-10) ... Removing autotools-dev (20180224.1) ... Removing m4 (1.4.18-2) ... Removing libsigsegv2:amd64 (2.12-2) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... Processing triggers for libc-bin (2.28-8) ... (Reading database ... 16514 files and directories currently installed.) Purging configuration files for mysql-common (5.8+1.0.5) ... Purging configuration files for libglib2.0-0:amd64 (2.58.3-1) ... Purging configuration files for libsnmp-base (5.7.3+dfsg-5) ... Purging configuration files for libssl1.1:armhf (1.1.1b-1) ... Purging configuration files for libsensors-config (1:3.5.0-3) ... Purging configuration files for lintian (2.9.1) ... Purging configuration files for man-db (2.8.5-2) ... Purging configuration files for mariadb-common (1:10.3.13-1) ... Purging configuration files for libwrap0:armhf (7.6.q-28) ... Purging configuration files for bsdmainutils (11.1.2+b1) ... Purging configuration files for libudev-dev:armhf (241-1) ... Purging configuration files for autoconf (2.69-11) ... Purging configuration files for libc6:armhf (2.28-8) ... Purging configuration files for groff-base (1.22.4-3) ... Purging configuration files for libsnmp-dev:armhf (5.7.3+dfsg-5) ... Purging configuration files for procps (2:3.3.15-2) ... +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any Build-Space: n/a Build-Time: 19 Distribution: unstable-amd64-sbuild Foreign Architectures: armhf Host Architecture: armhf Install-Time: 12 Job: /home/build/sbuild-setup/repo/pool/main/w/wmnd/wmnd_0.4.17-3.dsc Lintian: warn Machine Architecture: amd64 Package: wmnd Package-Time: 34 Source-Version: 0.4.17-3 Space: n/a Status: successful Version: 0.4.17-3 -------------------------------------------------------------------------------- Finished at 2019-03-07T12:04:20Z Build needed 00:00:34, no disk space