sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 36857dea695f +==============================================================================+ | xinput 1.6.2-1 (armhf) Thu, 07 Mar 2019 14:24:41 +0000 | +==============================================================================+ Package: xinput Version: 1.6.2-1 Source Version: 1.6.2-1 Distribution: unstable-amd64-sbuild Machine Architecture: amd64 Host Architecture: armhf Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-7b44ffbb-5431-4d9a-b377-c741ca354a9a' with '<>' I: NOTICE: Log filtering will replace 'build/xinput-V3geg6/resolver-oN7pHy' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Hit:1 http://cdn-fastly.deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /home/build/sbuild-setup/repo/pool/main/x/xinput/xinput_1.6.2-1.dsc exists in /home/build/sbuild-setup/repo/pool/main/x/xinput; copying to chroot I: NOTICE: Log filtering will replace 'build/xinput-V3geg6/xinput-1.6.2' with '<>' I: NOTICE: Log filtering will replace 'build/xinput-V3geg6' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper (>= 9), dh-autoreconf, libx11-dev, libxi-dev (>= 2:1.5.99.1), libxext-dev, libxinerama-dev, libxrandr-dev, x11proto-input-dev (>= 2.1.99.1), pkg-config, automake, autoconf, xutils-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf Filtered Build-Depends: debhelper (>= 9), dh-autoreconf, libx11-dev, libxi-dev (>= 2:1.5.99.1), libxext-dev, libxinerama-dev, libxrandr-dev, x11proto-input-dev (>= 2.1.99.1), pkg-config, automake, autoconf, xutils-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [477 B] Get:5 copy:/<>/apt_archive ./ Packages [566 B] Fetched 2000 B in 0s (130 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libbsd0 libbsd0:armhf libc6:armhf libc6-dev:armhf libcroco3 libelf1 libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf libncurses6 libpipeline1 libpthread-stubs0-dev:armhf libsigsegv2 libstdc++-8-dev:armhf libstdc++6:armhf libtool libubsan1:armhf libuchardet0 libx11-6:armhf libx11-data libx11-dev:armhf libxau-dev:armhf libxau6:armhf libxcb1:armhf libxcb1-dev:armhf libxdmcp-dev:armhf libxdmcp6:armhf libxext-dev:armhf libxext6:armhf libxfixes-dev:armhf libxfixes3:armhf libxi-dev:armhf libxi6:armhf libxinerama-dev:armhf libxinerama1:armhf libxrandr-dev:armhf libxrandr2:armhf libxrender-dev:armhf libxrender1:armhf linux-libc-dev:armhf m4 man-db pkg-config po-debconf x11proto-core-dev x11proto-dev x11proto-fixes-dev x11proto-input-dev x11proto-randr-dev x11proto-xext-dev x11proto-xinerama-dev xorg-sgml-doctools xtrans-dev xutils-dev Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf libstdc++-8-doc:armhf libtool-doc gfortran | fortran95-compiler gcj-jdk libx11-doc:armhf libxcb-doc:armhf libxext-doc:armhf m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libidn2-0:armhf libarchive-cpio-perl libglib2.0-data shared-mime-info xdg-user-dirs libgpm2 libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf libatomic1:armhf libbsd0 libbsd0:armhf libc6:armhf libc6-dev:armhf libcroco3 libelf1 libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf libncurses6 libpipeline1 libpthread-stubs0-dev:armhf libsigsegv2 libstdc++-8-dev:armhf libstdc++6:armhf libtool libubsan1:armhf libuchardet0 libx11-6:armhf libx11-data libx11-dev:armhf libxau-dev:armhf libxau6:armhf libxcb1:armhf libxcb1-dev:armhf libxdmcp-dev:armhf libxdmcp6:armhf libxext-dev:armhf libxext6:armhf libxfixes-dev:armhf libxfixes3:armhf libxi-dev:armhf libxi6:armhf libxinerama-dev:armhf libxinerama1:armhf libxrandr-dev:armhf libxrandr2:armhf libxrender-dev:armhf libxrender1:armhf linux-libc-dev:armhf m4 man-db pkg-config po-debconf sbuild-build-depends-main-dummy:armhf x11proto-core-dev x11proto-dev x11proto-fixes-dev x11proto-input-dev x11proto-randr-dev x11proto-xext-dev x11proto-xinerama-dev xorg-sgml-doctools xtrans-dev xutils-dev 0 upgraded, 74 newly installed, 0 to remove and 0 not upgraded. Need to get 988 B/22.2 MB of archives. After this operation, 90.7 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [988 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 988 B in 0s (0 B/s) Selecting previously unselected package libbsd0:amd64. (Reading database ... 16452 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_amd64.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../07-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../08-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../09-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../10-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../11-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../12-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../13-libtool_2.4.6-10_all.deb ... Unpacking libtool (2.4.6-10) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../14-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../15-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../16-libfile-stripnondeterminism-perl_1.1.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../17-dh-strip-nondeterminism_1.1.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../18-libelf1_0.176-1_amd64.deb ... Unpacking libelf1:amd64 (0.176-1) ... Selecting previously unselected package dwz. Preparing to unpack .../19-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../20-libglib2.0-0_2.58.3-1_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-1) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../21-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../22-libncurses6_6.1+20181013-2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2) ... Selecting previously unselected package gettext. Preparing to unpack .../23-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../24-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../25-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../26-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package gcc-8-base:armhf. Preparing to unpack .../27-gcc-8-base_8.3.0-2_armhf.deb ... Unpacking gcc-8-base:armhf (8.3.0-2) ... Selecting previously unselected package libgcc1:armhf. Preparing to unpack .../28-libgcc1_1%3a8.3.0-2_armhf.deb ... Unpacking libgcc1:armhf (1:8.3.0-2) ... Selecting previously unselected package libc6:armhf. Preparing to unpack .../29-libc6_2.28-8_armhf.deb ... Unpacking libc6:armhf (2.28-8) ... Selecting previously unselected package libstdc++6:armhf. Preparing to unpack .../30-libstdc++6_8.3.0-2_armhf.deb ... Unpacking libstdc++6:armhf (8.3.0-2) ... Selecting previously unselected package libasan5:armhf. Preparing to unpack .../31-libasan5_8.3.0-2_armhf.deb ... Unpacking libasan5:armhf (8.3.0-2) ... Selecting previously unselected package libatomic1:armhf. Preparing to unpack .../32-libatomic1_8.3.0-2_armhf.deb ... Unpacking libatomic1:armhf (8.3.0-2) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../33-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package linux-libc-dev:armhf. Preparing to unpack .../34-linux-libc-dev_4.19.20-1_armhf.deb ... Unpacking linux-libc-dev:armhf (4.19.20-1) ... Selecting previously unselected package libc6-dev:armhf. Preparing to unpack .../35-libc6-dev_2.28-8_armhf.deb ... Unpacking libc6-dev:armhf (2.28-8) ... Selecting previously unselected package libgomp1:armhf. Preparing to unpack .../36-libgomp1_8.3.0-2_armhf.deb ... Unpacking libgomp1:armhf (8.3.0-2) ... Selecting previously unselected package libubsan1:armhf. Preparing to unpack .../37-libubsan1_8.3.0-2_armhf.deb ... Unpacking libubsan1:armhf (8.3.0-2) ... Selecting previously unselected package libgcc-8-dev:armhf. Preparing to unpack .../38-libgcc-8-dev_8.3.0-2_armhf.deb ... Unpacking libgcc-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package libpthread-stubs0-dev:armhf. Preparing to unpack .../39-libpthread-stubs0-dev_0.4-1_armhf.deb ... Unpacking libpthread-stubs0-dev:armhf (0.4-1) ... Selecting previously unselected package libstdc++-8-dev:armhf. Preparing to unpack .../40-libstdc++-8-dev_8.3.0-2_armhf.deb ... Unpacking libstdc++-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package libxau6:armhf. Preparing to unpack .../41-libxau6_1%3a1.0.8-1+b2_armhf.deb ... Unpacking libxau6:armhf (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:armhf. Preparing to unpack .../42-libxdmcp6_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp6:armhf (1:1.1.2-3) ... Selecting previously unselected package libxcb1:armhf. Preparing to unpack .../43-libxcb1_1.13.1-2_armhf.deb ... Unpacking libxcb1:armhf (1.13.1-2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../44-libx11-data_2%3a1.6.7-1_all.deb ... Unpacking libx11-data (2:1.6.7-1) ... Selecting previously unselected package libx11-6:armhf. Preparing to unpack .../45-libx11-6_2%3a1.6.7-1_armhf.deb ... Unpacking libx11-6:armhf (2:1.6.7-1) ... Selecting previously unselected package xorg-sgml-doctools. Preparing to unpack .../46-xorg-sgml-doctools_1%3a1.11-1_all.deb ... Unpacking xorg-sgml-doctools (1:1.11-1) ... Selecting previously unselected package x11proto-dev. Preparing to unpack .../47-x11proto-dev_2018.4-4_all.deb ... Unpacking x11proto-dev (2018.4-4) ... Selecting previously unselected package x11proto-core-dev. Preparing to unpack .../48-x11proto-core-dev_2018.4-4_all.deb ... Unpacking x11proto-core-dev (2018.4-4) ... Selecting previously unselected package libxau-dev:armhf. Preparing to unpack .../49-libxau-dev_1%3a1.0.8-1+b2_armhf.deb ... Unpacking libxau-dev:armhf (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp-dev:armhf. Preparing to unpack .../50-libxdmcp-dev_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp-dev:armhf (1:1.1.2-3) ... Selecting previously unselected package x11proto-input-dev. Preparing to unpack .../51-x11proto-input-dev_2018.4-4_all.deb ... Unpacking x11proto-input-dev (2018.4-4) ... Selecting previously unselected package xtrans-dev. Preparing to unpack .../52-xtrans-dev_1.3.5-1_all.deb ... Unpacking xtrans-dev (1.3.5-1) ... Selecting previously unselected package libxcb1-dev:armhf. Preparing to unpack .../53-libxcb1-dev_1.13.1-2_armhf.deb ... Unpacking libxcb1-dev:armhf (1.13.1-2) ... Selecting previously unselected package libx11-dev:armhf. Preparing to unpack .../54-libx11-dev_2%3a1.6.7-1_armhf.deb ... Unpacking libx11-dev:armhf (2:1.6.7-1) ... Selecting previously unselected package libxext6:armhf. Preparing to unpack .../55-libxext6_2%3a1.3.3-1+b2_armhf.deb ... Unpacking libxext6:armhf (2:1.3.3-1+b2) ... Selecting previously unselected package x11proto-xext-dev. Preparing to unpack .../56-x11proto-xext-dev_2018.4-4_all.deb ... Unpacking x11proto-xext-dev (2018.4-4) ... Selecting previously unselected package libxext-dev:armhf. Preparing to unpack .../57-libxext-dev_2%3a1.3.3-1+b2_armhf.deb ... Unpacking libxext-dev:armhf (2:1.3.3-1+b2) ... Selecting previously unselected package libxfixes3:armhf. Preparing to unpack .../58-libxfixes3_1%3a5.0.3-1_armhf.deb ... Unpacking libxfixes3:armhf (1:5.0.3-1) ... Selecting previously unselected package x11proto-fixes-dev. Preparing to unpack .../59-x11proto-fixes-dev_1%3a2018.4-4_all.deb ... Unpacking x11proto-fixes-dev (1:2018.4-4) ... Selecting previously unselected package libxfixes-dev:armhf. Preparing to unpack .../60-libxfixes-dev_1%3a5.0.3-1_armhf.deb ... Unpacking libxfixes-dev:armhf (1:5.0.3-1) ... Selecting previously unselected package libxi6:armhf. Preparing to unpack .../61-libxi6_2%3a1.7.9-1_armhf.deb ... Unpacking libxi6:armhf (2:1.7.9-1) ... Selecting previously unselected package libxi-dev:armhf. Preparing to unpack .../62-libxi-dev_2%3a1.7.9-1_armhf.deb ... Unpacking libxi-dev:armhf (2:1.7.9-1) ... Selecting previously unselected package libxinerama1:armhf. Preparing to unpack .../63-libxinerama1_2%3a1.1.4-2_armhf.deb ... Unpacking libxinerama1:armhf (2:1.1.4-2) ... Selecting previously unselected package x11proto-xinerama-dev. Preparing to unpack .../64-x11proto-xinerama-dev_2018.4-4_all.deb ... Unpacking x11proto-xinerama-dev (2018.4-4) ... Selecting previously unselected package libxinerama-dev:armhf. Preparing to unpack .../65-libxinerama-dev_2%3a1.1.4-2_armhf.deb ... Unpacking libxinerama-dev:armhf (2:1.1.4-2) ... Selecting previously unselected package libxrender1:armhf. Preparing to unpack .../66-libxrender1_1%3a0.9.10-1_armhf.deb ... Unpacking libxrender1:armhf (1:0.9.10-1) ... Selecting previously unselected package libxrandr2:armhf. Preparing to unpack .../67-libxrandr2_2%3a1.5.1-1_armhf.deb ... Unpacking libxrandr2:armhf (2:1.5.1-1) ... Selecting previously unselected package x11proto-randr-dev. Preparing to unpack .../68-x11proto-randr-dev_2018.4-4_all.deb ... Unpacking x11proto-randr-dev (2018.4-4) ... Selecting previously unselected package libxrender-dev:armhf. Preparing to unpack .../69-libxrender-dev_1%3a0.9.10-1_armhf.deb ... Unpacking libxrender-dev:armhf (1:0.9.10-1) ... Selecting previously unselected package libxrandr-dev:armhf. Preparing to unpack .../70-libxrandr-dev_2%3a1.5.1-1_armhf.deb ... Unpacking libxrandr-dev:armhf (2:1.5.1-1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../71-pkg-config_0.29-6_amd64.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package xutils-dev. Preparing to unpack .../72-xutils-dev_1%3a7.7+5+b1_amd64.deb ... Unpacking xutils-dev (1:7.7+5+b1) ... Selecting previously unselected package sbuild-build-depends-main-dummy:armhf. Preparing to unpack .../73-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-1) ... No schema files found: doing nothing. Setting up linux-libc-dev:armhf (4.19.20-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up libpthread-stubs0-dev:armhf (0.4-1) ... Setting up xtrans-dev (1.3.5-1) ... Setting up autotools-dev (20180224.1) ... Setting up libx11-data (2:1.6.7-1) ... Setting up libncurses6:amd64 (6.1+20181013-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up gcc-8-base:armhf (8.3.0-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libcroco3:amd64 (0.6.12-3) ... Setting up pkg-config (0.29-6) ... Setting up xutils-dev (1:7.7+5+b1) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up xorg-sgml-doctools (1:1.11-1) ... Setting up libbsd0:amd64 (0.9.1-2) ... Setting up libelf1:amd64 (0.176-1) ... Setting up x11proto-dev (2018.4-4) ... Setting up libfile-stripnondeterminism-perl (1.1.1-1) ... Setting up gettext (0.19.8.1-9) ... Setting up libtool (2.4.6-10) ... Setting up x11proto-randr-dev (2018.4-4) ... Setting up m4 (1.4.18-2) ... Setting up x11proto-xinerama-dev (2018.4-4) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up x11proto-core-dev (2018.4-4) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up x11proto-input-dev (2018.4-4) ... Setting up autoconf (2.69-11) ... Setting up x11proto-xext-dev (2018.4-4) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up x11proto-fixes-dev (1:2018.4-4) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libc6:armhf (2.28-8) ... Setting up libc6-dev:armhf (2.28-8) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libxau6:armhf (1:1.0.8-1+b2) ... Setting up libxdmcp6:armhf (1:1.1.2-3) ... Setting up libxcb1:armhf (1.13.1-2) ... Setting up libxau-dev:armhf (1:1.0.8-1+b2) ... Setting up libgcc1:armhf (1:8.3.0-2) ... Setting up libgomp1:armhf (8.3.0-2) ... Setting up dh-autoreconf (19) ... Setting up libxdmcp-dev:armhf (1:1.1.2-3) ... Setting up libatomic1:armhf (8.3.0-2) ... Setting up dh-strip-nondeterminism (1.1.1-1) ... Setting up libx11-6:armhf (2:1.6.7-1) ... Setting up libstdc++6:armhf (8.3.0-2) ... Setting up libxcb1-dev:armhf (1.13.1-2) ... Setting up libxrender1:armhf (1:0.9.10-1) ... Setting up libx11-dev:armhf (2:1.6.7-1) ... Setting up libxext6:armhf (2:1.3.3-1+b2) ... Setting up debhelper (12.1.1) ... Setting up libasan5:armhf (8.3.0-2) ... Setting up libxfixes3:armhf (1:5.0.3-1) ... Setting up libxinerama1:armhf (2:1.1.4-2) ... Setting up libxrandr2:armhf (2:1.5.1-1) ... Setting up libxext-dev:armhf (2:1.3.3-1+b2) ... Setting up libubsan1:armhf (8.3.0-2) ... Setting up libxrender-dev:armhf (1:0.9.10-1) ... Setting up libxi6:armhf (2:1.7.9-1) ... Setting up libxfixes-dev:armhf (1:5.0.3-1) ... Setting up libxrandr-dev:armhf (2:1.5.1-1) ... Setting up libxinerama-dev:armhf (2:1.1.4-2) ... Setting up libgcc-8-dev:armhf (8.3.0-2) ... Setting up libxi-dev:armhf (2:1.7.9-1) ... Setting up libstdc++-8-dev:armhf (8.3.0-2) ... Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Processing triggers for libc-bin (2.28-8) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Initial Foreign Architectures: armhf Arch check ok (armhf included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64) Toolchain package versions: binutils_2.31.1-15 dpkg-dev_1.19.5 g++-8_8.3.0-2 gcc-8_8.3.0-2 libc6-dev_2.28-8 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.3.0-2cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.3.0-2cross1 linux-libc-dev_4.19.20-1 Package versions: adduser_3.118 apt_1.8.0~rc4 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.1 base-passwd_3.5.46 bash_5.0-2 binutils_2.31.1-15 binutils-arm-linux-gnueabihf_2.31.1-15 binutils-common_2.31.1-15 binutils-x86-64-linux-gnu_2.31.1-15 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.6 bzip2_1.0.6-9 ca-certificates_20190110 ccache_3.6-1 coreutils_8.30-3 cpp_4:8.3.0-1 cpp-8_8.3.0-2 cpp-8-arm-linux-gnueabihf_8.3.0-2cross1 cpp-arm-linux-gnueabihf_4:8.3.0-1 cross-config_2.6.15-2 crossbuild-essential-armhf_12.6 dash_0.5.10.2-5 debconf_1.5.71 debhelper_12.1.1 debian-archive-keyring_2018.1 debianutils_4.8.6.1 dh-autoreconf_19 dh-strip-nondeterminism_1.1.1-1 diffutils_1:3.7-2 dirmngr_2.2.13-1 dpkg_1.19.5 dpkg-cross_2.6.15-2 dpkg-dev_1.19.5 dwz_0.12-3 e2fsprogs_1.45.0-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-4 findutils_4.6.0+git+20190209-2 g++_4:8.3.0-1 g++-8_8.3.0-2 g++-8-arm-linux-gnueabihf_8.3.0-2cross1 g++-arm-linux-gnueabihf_4:8.3.0-1 gcc_4:8.3.0-1 gcc-8_8.3.0-2 gcc-8-arm-linux-gnueabihf_8.3.0-2cross1 gcc-8-arm-linux-gnueabihf-base_8.3.0-2cross1 gcc-8-base_8.3.0-2 gcc-8-cross-base_8.3.0-2cross1 gcc-arm-linux-gnueabihf_4:8.3.0-1 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.13-1 gnupg-l10n_2.2.13-1 gnupg-utils_2.2.13-1 gpg_2.2.13-1 gpg-agent_2.2.13-1 gpg-wks-client_2.2.13-1 gpg-wks-server_2.2.13-1 gpgconf_2.2.13-1 gpgsm_2.2.13-1 gpgv_2.2.13-1 grep_3.3-1 groff-base_1.22.4-3 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-4 libapt-pkg5.0_1.8.0~rc4 libarchive-zip-perl_1.64-1 libasan5_8.3.0-2 libasan5-armhf-cross_8.3.0-2cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-2 libatomic1-armhf-cross_8.3.0-2cross1 libattr1_1:2.4.48-4 libaudit-common_1:2.8.4-2 libaudit1_1:2.8.4-2 libauthen-sasl-perl_2.1600-1 libbinutils_2.31.1-15 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9 libc-bin_2.28-8 libc-dev-bin_2.28-8 libc6_2.28-8 libc6-armhf-cross_2.28-7cross1 libc6-dev_2.28-8 libc6-dev-armhf-cross_2.28-7cross1 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-2 libcom-err2_1.45.0-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libdata-dump-perl_1.23-1 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.248 libdebian-dpkgcross-perl_2.6.15-2 libdpkg-perl_1.19.5 libeatmydata1_105-7 libelf1_0.176-1 libencode-locale-perl_1.05-1 libexpat1_2.2.6-1 libext2fs2_1.45.0-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-listing-perl_6.04-1 libfile-stripnondeterminism-perl_1.1.1-1 libfile-which-perl_1.23-1 libfont-afm-perl_1.20-2 libgcc-8-dev_8.3.0-2 libgcc-8-dev-armhf-cross_8.3.0-2cross1 libgcc1_1:8.3.0-2 libgcc1-armhf-cross_1:8.3.0-2cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-3 libgdbm6_1.18.1-3 libglib2.0-0_2.58.3-1 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.6-2 libgomp1_8.3.0-2 libgomp1-armhf-cross_8.3.0-2cross1 libgpg-error0_1.35-1 libhogweed4_3.4.1-1 libhtml-form-perl_6.03-1 libhtml-format-perl_2.12-1 libhtml-parser-perl_3.72-3+b3 libhtml-tagset-perl_3.20-3 libhtml-tree-perl_5.07-2 libhttp-cookies-perl_6.04-1 libhttp-daemon-perl_6.01-3 libhttp-date-perl_6.02-1 libhttp-message-perl_6.18-1 libhttp-negotiate-perl_6.01-1 libicu63_63.1-6 libidn2-0_2.0.5-1 libio-html-perl_1.001-1 libio-socket-ssl-perl_2.060-3 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_8.3.0-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-2 liblwp-mediatypes-perl_6.02-1 liblwp-protocol-https-perl_6.07-2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-4 libmagic1_1:5.35-4 libmailtools-perl_2.18-1 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libmpx2_8.3.0-2 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnet-http-perl_6.18-1 libnet-smtp-ssl-perl_1.04-1 libnet-ssleay-perl_1.85-2+b1 libnettle6_3.4.1-1 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre3_2:8.39-11 libperl5.28_5.28.1-4 libpipeline1_1.5.1-2 libpthread-stubs0-dev_0.4-1 libquadmath0_8.3.0-2 libreadline7_7.0-5 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsigsegv2_2.12-2 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-1 libss2_1.45.0-1 libssl1.1_1.1.1b-1 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.3.0-2cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.3.0-2cross1 libsystemd0_241-1 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtry-tiny-perl_0.30-1 libtsan0_8.3.0-2 libubsan1_8.3.0-2 libubsan1-armhf-cross_8.3.0-2cross1 libuchardet0_0.0.6-3 libudev1_241-1 libunistring2_0.9.10-1 liburi-perl_1.76-1 libuuid1_2.33.1-0.1 libwww-perl_6.36-1 libwww-robotrules-perl_6.02-1 libx11-6_2:1.6.7-1 libx11-data_2:1.6.7-1 libx11-dev_2:1.6.7-1 libxau-dev_1:1.0.8-1+b2 libxau6_1:1.0.8-1+b2 libxcb1_1.13.1-2 libxcb1-dev_1.13.1-2 libxdmcp-dev_1:1.1.2-3 libxdmcp6_1:1.1.2-3 libxext-dev_2:1.3.3-1+b2 libxext6_2:1.3.3-1+b2 libxfixes-dev_1:5.0.3-1 libxfixes3_1:5.0.3-1 libxi-dev_2:1.7.9-1 libxi6_2:1.7.9-1 libxinerama-dev_2:1.1.4-2 libxinerama1_2:1.1.4-2 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-parser-perl_2.44-4 libxml-sax-base-perl_1.09-1 libxml-sax-expat-perl_0.51-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libxrandr-dev_2:1.5.1-1 libxrandr2_2:1.5.1-1 libxrender-dev_1:0.9.10-1 libxrender1_1:0.9.10-1 libyaml-0-2_0.2.1-1 libyaml-libyaml-perl_0.76+repack-1 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.20-1 linux-libc-dev-armhf-cross_4.19.20-1cross1 login_1:4.5-1.1 lsb-base_10.2018112800 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mawk_1.3.3-17+b3 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 netbase_5.6 openssl_1.1.1b-1 passwd_1:4.5-1.1 patch_2.7.6-3 perl_5.28.1-4 perl-base_5.28.1-4 perl-modules-5.28_5.28.1-4 perl-openssl-defaults_3 pinentry-curses_1.1.0-1+b1 pkg-config_0.29-6 po-debconf_1.0.21 readline-common_7.0-5 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-5 tzdata_2018i-2 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-runtime_2.33.1-0.1 x11proto-core-dev_2018.4-4 x11proto-dev_2018.4-4 x11proto-fixes-dev_1:2018.4-4 x11proto-input-dev_2018.4-4 x11proto-randr-dev_2018.4-4 x11proto-xext-dev_2018.4-4 x11proto-xinerama-dev_2018.4-4 xorg-sgml-doctools_1:1.11-1 xtrans-dev_1.3.5-1 xutils-dev_1:7.7+5+b1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.0 Source: xinput Binary: xinput Architecture: any Version: 1.6.2-1 Maintainer: Debian X Strike Force Standards-Version: 3.9.6 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-xorg/app/xinput.git Vcs-Git: git://anonscm.debian.org/git/pkg-xorg/app/xinput Build-Depends: debhelper (>= 9), dh-autoreconf, libx11-dev, libxi-dev (>= 2:1.5.99.1), libxext-dev, libxinerama-dev, libxrandr-dev, x11proto-input-dev (>= 2.1.99.1), pkg-config, automake, autoconf, xutils-dev Package-List: xinput deb x11 optional arch=any Checksums-Sha1: c3bdd9c39a0d30db8948ae5e8a1354e6b4e9640a 200635 xinput_1.6.2.orig.tar.gz feabfd50ff719bc3015ca5a8f69ec0a0f3fb84cd 5064 xinput_1.6.2-1.diff.gz Checksums-Sha256: 2c8ca5ff2a8703cb7d898629a4311db720dbd30d0c162bfe37f18849a727bd42 200635 xinput_1.6.2.orig.tar.gz 3f3c5e50b22ca281ba26e48a6607073e310f3534b7a31b5920b574ab7d52a5be 5064 xinput_1.6.2-1.diff.gz Files: 6684f6015298d22936438173be3b7ef5 200635 xinput_1.6.2.orig.tar.gz 3d2aa98bb42ac3fcfb5968a3ba1d543b 5064 xinput_1.6.2-1.diff.gz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBCAAGBQJWMOekAAoJEDEBgAUJBeQMh4gP+wehSY4ivaPUM0t4Ezd9xQyL /2b2Up25mAg6IfWUZARCNBvB0rrEdlAknB/NnvgJ8xWsfdjjSgP/riv4V26FqlKY 6ciOk+fzKWCPAsiy76IEsjB18rtJxqql1SIcGod/iTkevzjNWUXT5hbO+oypipHA D9IwPZrq+Tmglcnz4iB6/CcnPRGjF9lbEE9Sv3LRKUXwWZen0CJozaz7WIEn6vrx wgX2jeQgrmyJY9i5M+0QueWrMtX4uf4q3+iMoMmKevEargNwW7cOIuRSXzqOkk// w/4F0NUqvFuaF9pIc9smSjNzjKguYhzMLnX9iJudTsITGRDMljzQpG/mmjvmtNA6 NdGyXpod1GNMagCfiM4CMjDT+eewc0UeMbj8F0eK6XJLS2MClzZHybnTL2X2c887 mBa1Y5Gd1oO8X6NwKvuz3O+ndiG8cVf+lzwDcl6/QxMhUbm1i41xxE/rK+50unUp zvtMnQRBP5pCO2Lksk3jXpox6YZnYrQwXg/+T87igD+lGENpEwLPNUf03eXv+00l jCgfbh4l6dJufjWkEs5I605Whpg+HSwf0biVwzbniNvOBY3vLng92Sm4bsbxeaY5 4fyNS/PhY8BlWKzjjD5rcpif1Unua49livQsuCuUeYjL2CZ1ZPbcG22tTlYWZdg6 zfZTijYum7petXiBN6Q7 =a5hj -----END PGP SIGNATURE----- gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Wed Oct 28 15:20:04 2015 UTC gpgv: using RSA key 310180050905E40C gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./xinput_1.6.2-1.dsc dpkg-source: info: extracting xinput in /<> dpkg-source: info: unpacking xinput_1.6.2.orig.tar.gz dpkg-source: info: applying xinput_1.6.2-1.diff.gz dpkg-source: info: upstream files that have been modified: /<>/autogen.sh Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf CCACHE_COMPRESS=1 CCACHE_DIR=/var/cache/ccache-sbuild CCACHE_UMASK=002 CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf DEB_BUILD_OPTIONS=nocheck HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=build PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=1000 SCHROOT_GROUP=build SCHROOT_SESSION_ID=unstable-amd64-sbuild-7b44ffbb-5431-4d9a-b377-c741ca354a9a SCHROOT_UID=1000 SCHROOT_USER=build SHELL=/bin/sh USER=build dpkg-buildpackage ----------------- Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16 dpkg-buildpackage: info: source package xinput dpkg-buildpackage: info: source version 1.6.2-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Julien Cristau dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --with autoreconf -Bbuild dh_testdir -O-Bbuild dh_auto_clean -O-Bbuild dh_autoreconf_clean -O-Bbuild dh_clean -O-Bbuild debian/rules build-arch dh build-arch --with autoreconf -Bbuild dh_testdir -a -O-Bbuild dh_update_autotools_config -a -O-Bbuild dh_autoreconf -a -O-Bbuild debian/rules override_dh_auto_configure make[1]: Entering directory '/<>' dh_auto_configure -- \ --disable-silent-rules cd build && ../configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking --host=arm-linux-gnueabihf --disable-silent-rules configure: WARNING: unrecognized options: --disable-maintainer-mode configure: loading site script /etc/dpkg-cross/cross-config.armhf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-gnueabihf-strip... arm-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports the include directive... yes (GNU style) checking for arm-linux-gnueabihf-gcc... arm-linux-gnueabihf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-linux-gnueabihf-gcc accepts -g... yes checking for arm-linux-gnueabihf-gcc option to accept ISO C89... none needed checking whether arm-linux-gnueabihf-gcc understands -c and -o together... yes checking dependency style of arm-linux-gnueabihf-gcc... none checking for arm-linux-gnueabihf-gcc option to accept ISO C99... none needed checking how to run the C preprocessor... arm-linux-gnueabihf-gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking whether __clang__ is declared... no checking whether __INTEL_COMPILER is declared... no checking whether __SUNPRO_C is declared... no checking for arm-linux-gnueabihf-pkg-config... /usr/bin/arm-linux-gnueabihf-pkg-config checking pkg-config is at least version 0.9.0... yes checking build system type... x86_64-pc-linux-gnu checking host system type... arm-unknown-linux-gnueabihf checking for a sed that does not truncate output... /bin/sed checking if arm-linux-gnueabihf-gcc supports -Werror=unknown-warning-option... no checking if arm-linux-gnueabihf-gcc supports -Werror=unused-command-line-argument... no checking if arm-linux-gnueabihf-gcc supports -Wall... yes checking if arm-linux-gnueabihf-gcc supports -Wpointer-arith... yes checking if arm-linux-gnueabihf-gcc supports -Wmissing-declarations... yes checking if arm-linux-gnueabihf-gcc supports -Wformat=2... yes checking if arm-linux-gnueabihf-gcc supports -Wstrict-prototypes... yes checking if arm-linux-gnueabihf-gcc supports -Wmissing-prototypes... yes checking if arm-linux-gnueabihf-gcc supports -Wnested-externs... yes checking if arm-linux-gnueabihf-gcc supports -Wbad-function-cast... yes checking if arm-linux-gnueabihf-gcc supports -Wold-style-definition... yes checking if arm-linux-gnueabihf-gcc supports -Wdeclaration-after-statement... yes checking if arm-linux-gnueabihf-gcc supports -Wunused... yes checking if arm-linux-gnueabihf-gcc supports -Wuninitialized... yes checking if arm-linux-gnueabihf-gcc supports -Wshadow... yes checking if arm-linux-gnueabihf-gcc supports -Wmissing-noreturn... yes checking if arm-linux-gnueabihf-gcc supports -Wmissing-format-attribute... yes checking if arm-linux-gnueabihf-gcc supports -Wredundant-decls... yes checking if arm-linux-gnueabihf-gcc supports -Wlogical-op... yes checking if arm-linux-gnueabihf-gcc supports -Werror=implicit... yes checking if arm-linux-gnueabihf-gcc supports -Werror=nonnull... yes checking if arm-linux-gnueabihf-gcc supports -Werror=init-self... yes checking if arm-linux-gnueabihf-gcc supports -Werror=main... yes checking if arm-linux-gnueabihf-gcc supports -Werror=missing-braces... yes checking if arm-linux-gnueabihf-gcc supports -Werror=sequence-point... yes checking if arm-linux-gnueabihf-gcc supports -Werror=return-type... yes checking if arm-linux-gnueabihf-gcc supports -Werror=trigraphs... yes checking if arm-linux-gnueabihf-gcc supports -Werror=array-bounds... yes checking if arm-linux-gnueabihf-gcc supports -Werror=write-strings... yes checking if arm-linux-gnueabihf-gcc supports -Werror=address... yes checking if arm-linux-gnueabihf-gcc supports -Werror=int-to-pointer-cast... yes checking if arm-linux-gnueabihf-gcc supports -Werror=pointer-to-int-cast... yes checking if arm-linux-gnueabihf-gcc supports -pedantic... yes checking if arm-linux-gnueabihf-gcc supports -Werror... yes checking if arm-linux-gnueabihf-gcc supports -Werror=attributes... yes checking whether make supports nested variables... (cached) yes checking for XINPUT... yes checking for XI2... yes checking for XI21... yes checking for XI22... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating man/Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-maintainer-mode make[1]: Leaving directory '/<>' dh_auto_build -a -O-Bbuild cd build && make -j1 make[1]: Entering directory '/<>/build' make all-recursive make[2]: Entering directory '/<>/build' Making all in src make[3]: Entering directory '/<>/build/src' arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o buttonmap.o ../../src/buttonmap.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o feedback.o ../../src/feedback.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o list.o ../../src/list.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o setint.o ../../src/setint.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o setmode.o ../../src/setmode.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o setptr.o ../../src/setptr.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o state.o ../../src/state.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o property.o ../../src/property.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o test.o ../../src/test.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput.o ../../src/xinput.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o hierarchy.o ../../src/hierarchy.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o setcp.o ../../src/setcp.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o test_xi2.o ../../src/test_xi2.c arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o transform.o ../../src/transform.c arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o xinput buttonmap.o feedback.o list.o setint.o setmode.o setptr.o state.o property.o test.o xinput.o hierarchy.o setcp.o test_xi2.o transform.o -L/usr/lib/arm-linux-gnueabihf -lX11 -lXext -lXi -lXrandr -lXinerama make[3]: Leaving directory '/<>/build/src' Making all in man make[3]: Entering directory '/<>/build/man' /bin/sed -e 's|__vendorversion__|"xinput 1.6.2" "X Version 11"|' -e 's|__xorgversion__|"xinput 1.6.2" "X Version 11"|' -e 's|__xservername__|Xorg|g' -e 's|__xconfigfile__|xorg.conf|g' -e 's|__projectroot__|/usr|g' -e 's|__apploaddir__||g' -e 's|__appmansuffix__|1|g' -e 's|__drivermansuffix__|4|g' -e 's|__adminmansuffix__|8|g' -e 's|__libmansuffix__|3|g' -e 's|__miscmansuffix__|7|g' -e 's|__filemansuffix__|5|g' < ../../man/xinput.man > xinput.1 make[3]: Leaving directory '/<>/build/man' make[3]: Entering directory '/<>/build' make[3]: Leaving directory '/<>/build' make[2]: Leaving directory '/<>/build' make[1]: Leaving directory '/<>/build' dh_auto_test -a -O-Bbuild fakeroot debian/rules binary-arch dh binary-arch --with autoreconf -Bbuild dh_auto_test -a -O-Bbuild dh_testroot -a -O-Bbuild dh_prep -a -O-Bbuild dh_installdirs -a -O-Bbuild dh_auto_install -a -O-Bbuild cd build && make -j1 install DESTDIR=/<>/debian/xinput AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/<>/build' Making install in src make[2]: Entering directory '/<>/build/src' make[3]: Entering directory '/<>/build/src' /bin/mkdir -p '/<>/debian/xinput/usr/bin' /usr/bin/install -c xinput '/<>/debian/xinput/usr/bin' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/<>/build/src' make[2]: Leaving directory '/<>/build/src' Making install in man make[2]: Entering directory '/<>/build/man' make[3]: Entering directory '/<>/build/man' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/<>/debian/xinput/usr/share/man/man1' /usr/bin/install -c -m 644 xinput.1 '/<>/debian/xinput/usr/share/man/man1' make[3]: Leaving directory '/<>/build/man' make[2]: Leaving directory '/<>/build/man' make[2]: Entering directory '/<>/build' make[3]: Entering directory '/<>/build' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/<>/build' make[2]: Leaving directory '/<>/build' make[1]: Leaving directory '/<>/build' dh_install -a -O-Bbuild dh_installdocs -a -O-Bbuild dh_installchangelogs -a -O-Bbuild dh_installexamples -a -O-Bbuild dh_installman -a -O-Bbuild dh_installcatalogs -a -O-Bbuild dh_installcron -a -O-Bbuild dh_installdebconf -a -O-Bbuild dh_installemacsen -a -O-Bbuild dh_installifupdown -a -O-Bbuild dh_installinfo -a -O-Bbuild dh_installinit -a -O-Bbuild dh_installmenu -a -O-Bbuild dh_installmime -a -O-Bbuild dh_installmodules -a -O-Bbuild dh_installlogcheck -a -O-Bbuild dh_installlogrotate -a -O-Bbuild dh_installpam -a -O-Bbuild dh_installppp -a -O-Bbuild dh_installudev -a -O-Bbuild dh_installgsettings -a -O-Bbuild dh_bugfiles -a -O-Bbuild dh_ucf -a -O-Bbuild dh_lintian -a -O-Bbuild dh_gconf -a -O-Bbuild dh_gconf: Please migrate to dh_installgsettings; gconf + dh_gconf is scheduled for removal. dh_icons -a -O-Bbuild dh_perl -a -O-Bbuild dh_usrlocal -a -O-Bbuild dh_link -a -O-Bbuild dh_installwm -a -O-Bbuild dh_installxfonts -a -O-Bbuild dh_strip_nondeterminism -a -O-Bbuild dh_compress -a -O-Bbuild dh_fixperms -a -O-Bbuild dh_missing -a -O-Bbuild dh_strip -a -O-Bbuild dh_makeshlibs -a -O-Bbuild dh_shlibdeps -a -O-Bbuild dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/xinput/usr/bin/xinput was not linked against libXext.so.6 (it uses none of the library's symbols) dh_installdeb -a -O-Bbuild dh_gencontrol -a -O-Bbuild dh_md5sums -a -O-Bbuild dh_builddeb -a -O-Bbuild dpkg-deb: building package 'xinput-dbgsym' in '../xinput-dbgsym_1.6.2-1_armhf.deb'. dpkg-deb: building package 'xinput' in '../xinput_1.6.2-1_armhf.deb'. dpkg-genbuildinfo --build=any dpkg-genchanges --build=any >../xinput_1.6.2-1_armhf.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2019-03-07T14:25:11Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ xinput_1.6.2-1_armhf.changes: ----------------------------- Format: 1.8 Date: Wed, 28 Oct 2015 15:14:22 +0000 Source: xinput Binary: xinput xinput-dbgsym Built-For-Profiles: cross nocheck Architecture: armhf Version: 1.6.2-1 Distribution: unstable-amd64-sbuild Urgency: medium Maintainer: Debian X Strike Force Changed-By: Julien Cristau Description: xinput - Runtime configuration and test of XInput devices Closes: 686627 Changes: xinput (1.6.2-1) unstable; urgency=medium . * Team upload. * New upstream release. + Fix crash for enable/disable without a device argument (closes: #686627) * Let uscan verify tarball signatures. * Bump Standards-Version to 3.9.6 and update Vcs-* control fields. Checksums-Sha1: f6ad7302c86d248e29d6ba4d45fcd60c84c81394 85708 xinput-dbgsym_1.6.2-1_armhf.deb d9620889a477dbb723e33bd876bf2077dcdfc3a0 5423 xinput_1.6.2-1_armhf.buildinfo 2e18419105ec849e1863f5d5a384260b5f18c980 49124 xinput_1.6.2-1_armhf.deb Checksums-Sha256: 3dea73958a477cbae5a83bbcc1527285a086b2d33fb3f8b448ae573fd517149d 85708 xinput-dbgsym_1.6.2-1_armhf.deb 2e108d38302bc245687e68c75792fb2567a6a31b8380551639ac271ea37bbe6c 5423 xinput_1.6.2-1_armhf.buildinfo b61d76edaa1351818b00d2b015b84a8a1e23d816a31496a879d57060cce81440 49124 xinput_1.6.2-1_armhf.deb Files: 9690cac4286e74dbef22bac6efb50123 85708 debug optional xinput-dbgsym_1.6.2-1_armhf.deb 5ef601d497a45408e50ecc6f33eb24a4 5423 x11 optional xinput_1.6.2-1_armhf.buildinfo 32ceb1c287b0fcda46d7cc96b543133e 49124 x11 optional xinput_1.6.2-1_armhf.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: xinput Binary: xinput Architecture: armhf Version: 1.6.2-1 Checksums-Md5: 9690cac4286e74dbef22bac6efb50123 85708 xinput-dbgsym_1.6.2-1_armhf.deb 32ceb1c287b0fcda46d7cc96b543133e 49124 xinput_1.6.2-1_armhf.deb Checksums-Sha1: f6ad7302c86d248e29d6ba4d45fcd60c84c81394 85708 xinput-dbgsym_1.6.2-1_armhf.deb 2e18419105ec849e1863f5d5a384260b5f18c980 49124 xinput_1.6.2-1_armhf.deb Checksums-Sha256: 3dea73958a477cbae5a83bbcc1527285a086b2d33fb3f8b448ae573fd517149d 85708 xinput-dbgsym_1.6.2-1_armhf.deb b61d76edaa1351818b00d2b015b84a8a1e23d816a31496a879d57060cce81440 49124 xinput_1.6.2-1_armhf.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Thu, 07 Mar 2019 14:25:10 +0000 Build-Path: /<> Installed-Build-Depends: autoconf (= 2.69-11), automake (= 1:1.16.1-4), autopoint (= 0.19.8.1-9), autotools-dev (= 20180224.1), base-files (= 10.1), base-passwd (= 3.5.46), bash (= 5.0-2), binutils (= 2.31.1-15), binutils-common (= 2.31.1-15), binutils-x86-64-linux-gnu (= 2.31.1-15), bsdmainutils (= 11.1.2+b1), bsdutils (= 1:2.33.1-0.1), build-essential (= 12.6), bzip2 (= 1.0.6-9), coreutils (= 8.30-3), cpp (= 4:8.3.0-1), cpp-8 (= 8.3.0-2), dash (= 0.5.10.2-5), debconf (= 1.5.71), debhelper (= 12.1.1), debianutils (= 4.8.6.1), dh-autoreconf (= 19), dh-strip-nondeterminism (= 1.1.1-1), diffutils (= 1:3.7-2), dpkg (= 1.19.5), dpkg-dev (= 1.19.5), dwz (= 0.12-3), fdisk (= 2.33.1-0.1), file (= 1:5.35-4), findutils (= 4.6.0+git+20190209-2), g++ (= 4:8.3.0-1), g++-8 (= 8.3.0-2), gcc (= 4:8.3.0-1), gcc-8 (= 8.3.0-2), gcc-8-base (= 8.3.0-2), gettext (= 0.19.8.1-9), gettext-base (= 0.19.8.1-9), grep (= 3.3-1), groff-base (= 1.22.4-3), gzip (= 1.9-3), hostname (= 3.21), init-system-helpers (= 1.56+nmu1), intltool-debian (= 0.35.0+20060710.5), libacl1 (= 2.2.53-4), libarchive-zip-perl (= 1.64-1), libasan5 (= 8.3.0-2), libatomic1 (= 8.3.0-2), libattr1 (= 1:2.4.48-4), libaudit-common (= 1:2.8.4-2), libaudit1 (= 1:2.8.4-2), libbinutils (= 2.31.1-15), libblkid1 (= 2.33.1-0.1), libbsd0 (= 0.9.1-2), libbz2-1.0 (= 1.0.6-9), libc-bin (= 2.28-8), libc-dev-bin (= 2.28-8), libc6 (= 2.28-8), libc6-dev (= 2.28-8), libcap-ng0 (= 0.7.9-2), libcc1-0 (= 8.3.0-2), libcroco3 (= 0.6.12-3), libdb5.3 (= 5.3.28+dfsg1-0.5), libdebconfclient0 (= 0.248), libdpkg-perl (= 1.19.5), libelf1 (= 0.176-1), libfdisk1 (= 2.33.1-0.1), libffi6 (= 3.2.1-9), libfile-stripnondeterminism-perl (= 1.1.1-1), libgcc-8-dev (= 8.3.0-2), libgcc1 (= 1:8.3.0-2), libgcrypt20 (= 1.8.4-5), libgdbm-compat4 (= 1.18.1-3), libgdbm6 (= 1.18.1-3), libglib2.0-0 (= 2.58.3-1), libgmp10 (= 2:6.1.2+dfsg-4), libgomp1 (= 8.3.0-2), libgpg-error0 (= 1.35-1), libicu63 (= 63.1-6), libisl19 (= 0.20-2), libitm1 (= 8.3.0-2), liblsan0 (= 8.3.0-2), liblz4-1 (= 1.8.3-1), liblzma5 (= 5.2.4-1), libmagic-mgc (= 1:5.35-4), libmagic1 (= 1:5.35-4), libmount1 (= 2.33.1-0.1), libmpc3 (= 1.1.0-1), libmpfr6 (= 4.0.2-1), libmpx2 (= 8.3.0-2), libncurses6 (= 6.1+20181013-2), libncursesw6 (= 6.1+20181013-2), libpam-modules (= 1.3.1-5), libpam-modules-bin (= 1.3.1-5), libpam-runtime (= 1.3.1-5), libpam0g (= 1.3.1-5), libpcre3 (= 2:8.39-11), libperl5.28 (= 5.28.1-4), libpipeline1 (= 1.5.1-2), libpthread-stubs0-dev (= 0.4-1), libquadmath0 (= 8.3.0-2), libseccomp2 (= 2.3.3-4), libselinux1 (= 2.8-1+b1), libsigsegv2 (= 2.12-2), libsmartcols1 (= 2.33.1-0.1), libstdc++-8-dev (= 8.3.0-2), libstdc++6 (= 8.3.0-2), libsystemd0 (= 241-1), libtinfo6 (= 6.1+20181013-2), libtool (= 2.4.6-10), libtsan0 (= 8.3.0-2), libubsan1 (= 8.3.0-2), libuchardet0 (= 0.0.6-3), libudev1 (= 241-1), libunistring2 (= 0.9.10-1), libuuid1 (= 2.33.1-0.1), libx11-6 (= 2:1.6.7-1), libx11-data (= 2:1.6.7-1), libx11-dev (= 2:1.6.7-1), libxau-dev (= 1:1.0.8-1+b2), libxau6 (= 1:1.0.8-1+b2), libxcb1 (= 1.13.1-2), libxcb1-dev (= 1.13.1-2), libxdmcp-dev (= 1:1.1.2-3), libxdmcp6 (= 1:1.1.2-3), libxext-dev (= 2:1.3.3-1+b2), libxext6 (= 2:1.3.3-1+b2), libxfixes-dev (= 1:5.0.3-1), libxfixes3 (= 1:5.0.3-1), libxi-dev (= 2:1.7.9-1), libxi6 (= 2:1.7.9-1), libxinerama-dev (= 2:1.1.4-2), libxinerama1 (= 2:1.1.4-2), libxml2 (= 2.9.4+dfsg1-7+b3), libxrandr-dev (= 2:1.5.1-1), libxrandr2 (= 2:1.5.1-1), libxrender-dev (= 1:0.9.10-1), libxrender1 (= 1:0.9.10-1), linux-libc-dev (= 4.19.20-1), login (= 1:4.5-1.1), m4 (= 1.4.18-2), make (= 4.2.1-1.2), man-db (= 2.8.5-2), mawk (= 1.3.3-17+b3), ncurses-base (= 6.1+20181013-2), ncurses-bin (= 6.1+20181013-2), patch (= 2.7.6-3), perl (= 5.28.1-4), perl-base (= 5.28.1-4), perl-modules-5.28 (= 5.28.1-4), pkg-config (= 0.29-6), po-debconf (= 1.0.21), sed (= 4.7-1), sensible-utils (= 0.0.12), sysvinit-utils (= 2.93-8), tar (= 1.30+dfsg-5), util-linux (= 2.33.1-0.1), x11proto-core-dev (= 2018.4-4), x11proto-dev (= 2018.4-4), x11proto-fixes-dev (= 1:2018.4-4), x11proto-input-dev (= 2018.4-4), x11proto-randr-dev (= 2018.4-4), x11proto-xext-dev (= 2018.4-4), x11proto-xinerama-dev (= 2018.4-4), xorg-sgml-doctools (= 1:1.11-1), xtrans-dev (= 1.3.5-1), xutils-dev (= 1:7.7+5+b1), xz-utils (= 5.2.4-1), zlib1g (= 1:1.2.11.dfsg-1) Environment: DEB_BUILD_OPTIONS="nocheck parallel=16" DEB_BUILD_PROFILES="cross nocheck" LANG="en_US.UTF-8" LC_ALL="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" MAKEFLAGS=" -j16" SOURCE_DATE_EPOCH="1446045262" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ xinput-dbgsym_1.6.2-1_armhf.deb ------------------------------- new Debian package, version 2.0. size 85708 bytes: control archive=524 bytes. 343 bytes, 12 lines control 106 bytes, 1 lines md5sums Package: xinput-dbgsym Source: xinput Version: 1.6.2-1 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Debian X Strike Force Installed-Size: 102 Depends: xinput (= 1.6.2-1) Section: debug Priority: optional Description: debug symbols for xinput Build-Ids: 543e98de295ecda925c4301d6b2ac898a42e4efd drwxr-xr-x root/root 0 2015-10-28 15:14 ./ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/lib/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/lib/debug/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/lib/debug/.build-id/54/ -rw-r--r-- root/root 93756 2015-10-28 15:14 ./usr/lib/debug/.build-id/54/3e98de295ecda925c4301d6b2ac898a42e4efd.debug drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/share/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/share/doc/ lrwxrwxrwx root/root 0 2015-10-28 15:14 ./usr/share/doc/xinput-dbgsym -> xinput xinput_1.6.2-1_armhf.deb ------------------------ new Debian package, version 2.0. size 49124 bytes: control archive=712 bytes. 420 bytes, 11 lines control 384 bytes, 6 lines md5sums Package: xinput Version: 1.6.2-1 Architecture: armhf Maintainer: Debian X Strike Force Installed-Size: 82 Depends: libc6 (>= 2.7), libx11-6 (>= 2:1.2.99.901), libxext6, libxi6 (>= 2:1.2.99.4), libxinerama1, libxrandr2 (>= 2:1.2.0) Section: x11 Priority: optional Description: Runtime configuration and test of XInput devices Xinput is an utility for configuring and testing XInput devices. drwxr-xr-x root/root 0 2015-10-28 15:14 ./ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/bin/ -rwxr-xr-x root/root 39052 2015-10-28 15:14 ./usr/bin/xinput drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/share/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/share/doc/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/share/doc/xinput/ -rw-r--r-- root/root 696 2011-03-08 01:00 ./usr/share/doc/xinput/README -rw-r--r-- root/root 1716 2015-10-28 15:14 ./usr/share/doc/xinput/changelog.Debian.gz -rw-r--r-- root/root 23723 2015-10-19 21:36 ./usr/share/doc/xinput/changelog.gz -rw-r--r-- root/root 3623 2015-10-28 15:14 ./usr/share/doc/xinput/copyright drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/share/man/ drwxr-xr-x root/root 0 2015-10-28 15:14 ./usr/share/man/man1/ -rw-r--r-- root/root 2474 2015-10-28 15:14 ./usr/share/man/man1/xinput.1.gz lintian ------- Setup apt archive ----------------- Merged Build-Depends: lintian:amd64 Filtered Build-Depends: lintian:amd64 dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<>/apt_archive/sbuild-build-depends-lintian-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [963 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [611 B] Get:5 copy:/<>/apt_archive ./ Packages [698 B] Fetched 2272 B in 0s (200 kB/s) Reading package lists... Reading package lists... Install lintian build dependencies (apt-based resolver) ------------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils t1utils Suggested packages: libhtml-template-perl binutils-multiarch libtext-template-perl Recommended packages: libcgi-fast-perl libasync-mergepoint-perl libsereal-perl libtest-fatal-perl libtest-refcount-perl libdigest-bubblebabble-perl libnet-dns-sec-perl libnet-libidn-perl libunicode-utf8-perl libperlio-gzip-perl The following NEW packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils sbuild-build-depends-lintian-dummy:armhf t1utils 0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded. Need to get 2847 kB/2971 kB of archives. After this operation, 9356 kB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [844 B] Get:2 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libapt-pkg-perl amd64 0.1.34+b1 [71.2 kB] Get:3 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB] Get:4 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libcgi-pm-perl all 4.40-1 [222 kB] Get:5 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB] Get:6 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB] Get:7 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB] Get:8 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB] Get:9 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB] Get:10 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-dns-perl all 1.19-1 [372 kB] Get:11 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB] Get:12 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB] Get:13 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB] Get:14 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB] Get:15 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB] Get:16 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libfuture-perl all 0.39-1 [74.5 kB] Get:17 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB] Get:18 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libio-async-perl all 0.72-1 [262 kB] Get:19 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB] Get:20 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libipc-run-perl all 20180523.0-1 [101 kB] Get:21 http://cdn-fastly.deb.debian.org/debian sid/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB] Get:22 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB] Get:23 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB] Get:24 http://cdn-fastly.deb.debian.org/debian sid/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB] Get:25 http://cdn-fastly.deb.debian.org/debian sid/main amd64 t1utils amd64 1.41-3 [62.3 kB] Get:26 http://cdn-fastly.deb.debian.org/debian sid/main amd64 lintian all 2.9.1 [1193 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2847 kB in 8s (347 kB/s) Selecting previously unselected package diffstat. (Reading database ... 20185 files and directories currently installed.) Preparing to unpack .../00-diffstat_1.62-1_amd64.deb ... Unpacking diffstat (1.62-1) ... Selecting previously unselected package libapt-pkg-perl. Preparing to unpack .../01-libapt-pkg-perl_0.1.34+b1_amd64.deb ... Unpacking libapt-pkg-perl (0.1.34+b1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../02-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../03-libcgi-pm-perl_4.40-1_all.deb ... Unpacking libcgi-pm-perl (4.40-1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../04-libsub-name-perl_0.21-1+b3_amd64.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libclass-accessor-perl. Preparing to unpack .../05-libclass-accessor-perl_0.51-1_all.deb ... Unpacking libclass-accessor-perl (0.51-1) ... Selecting previously unselected package libclone-perl. Preparing to unpack .../06-libclone-perl_0.41-1+b1_amd64.deb ... Unpacking libclone-perl (0.41-1+b1) ... Selecting previously unselected package libdigest-hmac-perl. Preparing to unpack .../07-libdigest-hmac-perl_1.03+dfsg-2_all.deb ... Unpacking libdigest-hmac-perl (1.03+dfsg-2) ... Selecting previously unselected package libnet-ip-perl. Preparing to unpack .../08-libnet-ip-perl_1.26-2_all.deb ... Unpacking libnet-ip-perl (1.26-2) ... Selecting previously unselected package libnet-dns-perl. Preparing to unpack .../09-libnet-dns-perl_1.19-1_all.deb ... Unpacking libnet-dns-perl (1.19-1) ... Selecting previously unselected package libnet-domain-tld-perl. Preparing to unpack .../10-libnet-domain-tld-perl_1.75-1_all.deb ... Unpacking libnet-domain-tld-perl (1.75-1) ... Selecting previously unselected package libemail-valid-perl. Preparing to unpack .../11-libemail-valid-perl_1.202-1_all.deb ... Unpacking libemail-valid-perl (1.202-1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../12-libexporter-tiny-perl_1.002001-1_all.deb ... Unpacking libexporter-tiny-perl (1.002001-1) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../13-libipc-system-simple-perl_1.25-4_all.deb ... Unpacking libipc-system-simple-perl (1.25-4) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../14-libfile-basedir-perl_0.08-1_all.deb ... Unpacking libfile-basedir-perl (0.08-1) ... Selecting previously unselected package libfuture-perl. Preparing to unpack .../15-libfuture-perl_0.39-1_all.deb ... Unpacking libfuture-perl (0.39-1) ... Selecting previously unselected package libstruct-dumb-perl. Preparing to unpack .../16-libstruct-dumb-perl_0.09-1_all.deb ... Unpacking libstruct-dumb-perl (0.09-1) ... Selecting previously unselected package libio-async-perl. Preparing to unpack .../17-libio-async-perl_0.72-1_all.deb ... Unpacking libio-async-perl (0.72-1) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../18-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ... Unpacking libio-pty-perl (1:1.08-1.1+b5) ... Selecting previously unselected package libipc-run-perl. Preparing to unpack .../19-libipc-run-perl_20180523.0-1_all.deb ... Unpacking libipc-run-perl (20180523.0-1) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../20-liblist-moreutils-perl_0.416-1+b4_amd64.deb ... Unpacking liblist-moreutils-perl (0.416-1+b4) ... Selecting previously unselected package libparse-debianchangelog-perl. Preparing to unpack .../21-libparse-debianchangelog-perl_1.2.0-13_all.deb ... Unpacking libparse-debianchangelog-perl (1.2.0-13) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../22-libpath-tiny-perl_0.108-1_all.deb ... Unpacking libpath-tiny-perl (0.108-1) ... Selecting previously unselected package libtext-levenshtein-perl. Preparing to unpack .../23-libtext-levenshtein-perl_0.13-1_all.deb ... Unpacking libtext-levenshtein-perl (0.13-1) ... Selecting previously unselected package patchutils. Preparing to unpack .../24-patchutils_0.3.4-2_amd64.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package t1utils. Preparing to unpack .../25-t1utils_1.41-3_amd64.deb ... Unpacking t1utils (1.41-3) ... Selecting previously unselected package lintian. Preparing to unpack .../26-lintian_2.9.1_all.deb ... Unpacking lintian (2.9.1) ... Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf. Preparing to unpack .../27-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Setting up libapt-pkg-perl (0.1.34+b1) ... Setting up libstruct-dumb-perl (0.09-1) ... Setting up libio-pty-perl (1:1.08-1.1+b5) ... Setting up libclone-perl (0.41-1+b1) ... Setting up libfuture-perl (0.39-1) ... Setting up libcgi-pm-perl (4.40-1) ... Setting up libtext-levenshtein-perl (0.13-1) ... Setting up libio-async-perl (0.72-1) ... Setting up patchutils (0.3.4-2) ... Setting up libdigest-hmac-perl (1.03+dfsg-2) ... Setting up libipc-system-simple-perl (1.25-4) ... Setting up libnet-domain-tld-perl (1.75-1) ... Setting up t1utils (1.41-3) ... Setting up diffstat (1.62-1) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up libpath-tiny-perl (0.108-1) ... Setting up libexporter-tiny-perl (1.002001-1) ... Setting up libclass-accessor-perl (0.51-1) ... Setting up libnet-ip-perl (1.26-2) ... Setting up libfile-basedir-perl (0.08-1) ... Setting up liblist-moreutils-perl (0.416-1+b4) ... Setting up libnet-dns-perl (1.19-1) ... Setting up libparse-debianchangelog-perl (1.2.0-13) ... Setting up libemail-valid-perl (1.202-1) ... Setting up lintian (2.9.1) ... Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Processing triggers for man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. W: xinput source: orig-tarball-missing-upstream-signature xinput_1.6.2.orig.tar.gz W: xinput source: missing-debian-source-format E: xinput source: no-human-maintainers W: xinput source: vcs-obsolete-in-debian-infrastructure vcs-git git://anonscm.debian.org/git/pkg-xorg/app/xinput W: xinput source: vcs-obsolete-in-debian-infrastructure vcs-browser https://anonscm.debian.org/cgit/pkg-xorg/app/xinput.git W: xinput source: ancient-standards-version 3.9.6 (released 2014-09-17) (current is 4.3.0) E: Lintian run failed (policy violation) +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following packages will be REMOVED: autoconf* automake* autopoint* autotools-dev* bsdmainutils* debhelper* dh-autoreconf* dh-strip-nondeterminism* diffstat* dwz* gcc-8-base:armhf* gettext* gettext-base* groff-base* intltool-debian* libapt-pkg-perl* libarchive-zip-perl* libasan5:armhf* libatomic1:armhf* libbsd0* libbsd0:armhf* libc6:armhf* libc6-dev:armhf* libcapture-tiny-perl* libcgi-pm-perl* libclass-accessor-perl* libclone-perl* libcroco3* libdigest-hmac-perl* libelf1* libemail-valid-perl* libexporter-tiny-perl* libfile-basedir-perl* libfile-stripnondeterminism-perl* libfuture-perl* libgcc-8-dev:armhf* libgcc1:armhf* libglib2.0-0* libgomp1:armhf* libio-async-perl* libio-pty-perl* libipc-run-perl* libipc-system-simple-perl* liblist-moreutils-perl* libncurses6* libnet-dns-perl* libnet-domain-tld-perl* libnet-ip-perl* libparse-debianchangelog-perl* libpath-tiny-perl* libpipeline1* libpthread-stubs0-dev:armhf* libsigsegv2* libstdc++-8-dev:armhf* libstdc++6:armhf* libstruct-dumb-perl* libsub-name-perl* libtext-levenshtein-perl* libtool* libubsan1:armhf* libuchardet0* libx11-6:armhf* libx11-data* libx11-dev:armhf* libxau-dev:armhf* libxau6:armhf* libxcb1:armhf* libxcb1-dev:armhf* libxdmcp-dev:armhf* libxdmcp6:armhf* libxext-dev:armhf* libxext6:armhf* libxfixes-dev:armhf* libxfixes3:armhf* libxi-dev:armhf* libxi6:armhf* libxinerama-dev:armhf* libxinerama1:armhf* libxrandr-dev:armhf* libxrandr2:armhf* libxrender-dev:armhf* libxrender1:armhf* lintian* linux-libc-dev:armhf* m4* man-db* patchutils* pkg-config* po-debconf* sbuild-build-depends-lintian-dummy:armhf* sbuild-build-depends-main-dummy:armhf* t1utils* x11proto-core-dev* x11proto-dev* x11proto-fixes-dev* x11proto-input-dev* x11proto-randr-dev* x11proto-xext-dev* x11proto-xinerama-dev* xorg-sgml-doctools* xtrans-dev* xutils-dev* 0 upgraded, 0 newly installed, 102 to remove and 0 not upgraded. After this operation, 100 MB disk space will be freed. (Reading database ... 21463 files and directories currently installed.) Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Removing lintian (2.9.1) ... Removing diffstat (1.62-1) ... Removing libstdc++-8-dev:armhf (8.3.0-2) ... Removing libgcc-8-dev:armhf (8.3.0-2) ... Removing libubsan1:armhf (8.3.0-2) ... Removing libasan5:armhf (8.3.0-2) ... Removing libstdc++6:armhf (8.3.0-2) ... Removing libapt-pkg-perl (0.1.34+b1) ... Removing libatomic1:armhf (8.3.0-2) ... Removing libxrandr-dev:armhf (2:1.5.1-1) ... Removing libxrender-dev:armhf (1:0.9.10-1) ... Removing libxinerama-dev:armhf (2:1.1.4-2) ... Removing libxrandr2:armhf (2:1.5.1-1) ... Removing libxrender1:armhf (1:0.9.10-1) ... Removing libxinerama1:armhf (2:1.1.4-2) ... Removing libc6-dev:armhf (2.28-8) ... Removing libcapture-tiny-perl (0.48-1) ... Removing libparse-debianchangelog-perl (1.2.0-13) ... Removing libcgi-pm-perl (4.40-1) ... Removing libclass-accessor-perl (0.51-1) ... Removing libclone-perl (0.41-1+b1) ... Removing libemail-valid-perl (1.202-1) ... Removing libnet-dns-perl (1.19-1) ... Removing libdigest-hmac-perl (1.03+dfsg-2) ... Removing liblist-moreutils-perl (0.416-1+b4) ... Removing libexporter-tiny-perl (1.002001-1) ... Removing libfile-basedir-perl (0.08-1) ... Removing libio-async-perl (0.72-1) ... Removing libfuture-perl (0.39-1) ... Removing pkg-config (0.29-6) ... Removing libgomp1:armhf (8.3.0-2) ... Removing libipc-run-perl (20180523.0-1) ... Removing libio-pty-perl (1:1.08-1.1+b5) ... Removing libipc-system-simple-perl (1.25-4) ... Removing libnet-domain-tld-perl (1.75-1) ... Removing libnet-ip-perl (1.26-2) ... Removing libpath-tiny-perl (0.108-1) ... Removing libstruct-dumb-perl (0.09-1) ... Removing libsub-name-perl (0.21-1+b3) ... Removing libtext-levenshtein-perl (0.13-1) ... Removing libxi-dev:armhf (2:1.7.9-1) ... Removing libxext-dev:armhf (2:1.3.3-1+b2) ... Removing libxi6:armhf (2:1.7.9-1) ... Removing libxext6:armhf (2:1.3.3-1+b2) ... Removing libxfixes-dev:armhf (1:5.0.3-1) ... Removing libxfixes3:armhf (1:5.0.3-1) ... Removing linux-libc-dev:armhf (4.19.20-1) ... Removing patchutils (0.3.4-2) ... Removing t1utils (1.41-3) ... Removing x11proto-xinerama-dev (2018.4-4) ... Removing x11proto-xext-dev (2018.4-4) ... Removing x11proto-fixes-dev (1:2018.4-4) ... Removing x11proto-input-dev (2018.4-4) ... Removing x11proto-randr-dev (2018.4-4) ... Removing xutils-dev (1:7.7+5+b1) ... Removing libx11-dev:armhf (2:1.6.7-1) ... Removing libxcb1-dev:armhf (1.13.1-2) ... Removing libxdmcp-dev:armhf (1:1.1.2-3) ... Removing libx11-6:armhf (2:1.6.7-1) ... Removing libxcb1:armhf (1.13.1-2) ... Removing libxdmcp6:armhf (1:1.1.2-3) ... Removing libbsd0:armhf (0.9.1-2) ... Removing libpthread-stubs0-dev:armhf (0.4-1) ... Removing libx11-data (2:1.6.7-1) ... Removing libxau-dev:armhf (1:1.0.8-1+b2) ... Removing libxau6:armhf (1:1.0.8-1+b2) ... Removing x11proto-core-dev (2018.4-4) ... Removing x11proto-dev (2018.4-4) ... Removing xorg-sgml-doctools (1:1.11-1) ... Removing xtrans-dev (1.3.5-1) ... Removing libgcc1:armhf (1:8.3.0-2) ... Removing debhelper (12.1.1) ... Removing dh-strip-nondeterminism (1.1.1-1) ... Removing man-db (2.8.5-2) ... Removing bsdmainutils (11.1.2+b1) ... Removing dwz (0.12-3) ... Removing gcc-8-base:armhf (8.3.0-2) ... Removing po-debconf (1.0.21) ... Removing intltool-debian (0.35.0+20060710.5) ... Removing gettext (0.19.8.1-9) ... Removing gettext-base (0.19.8.1-9) ... Removing groff-base (1.22.4-3) ... Removing libfile-stripnondeterminism-perl (1.1.1-1) ... Removing libarchive-zip-perl (1.64-1) ... Removing libbsd0:amd64 (0.9.1-2) ... Removing libc6:armhf (2.28-8) ... Removing libcroco3:amd64 (0.6.12-3) ... Removing libelf1:amd64 (0.176-1) ... Removing libglib2.0-0:amd64 (2.58.3-1) ... Removing libncurses6:amd64 (6.1+20181013-2) ... Removing libpipeline1:amd64 (1.5.1-2) ... Removing libuchardet0:amd64 (0.0.6-3) ... Removing dh-autoreconf (19) ... Removing automake (1:1.16.1-4) ... Removing autoconf (2.69-11) ... Removing autopoint (0.19.8.1-9) ... Removing libtool (2.4.6-10) ... Removing autotools-dev (20180224.1) ... Removing m4 (1.4.18-2) ... Removing libsigsegv2:amd64 (2.12-2) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... Processing triggers for libc-bin (2.28-8) ... (Reading database ... 16471 files and directories currently installed.) Purging configuration files for libglib2.0-0:amd64 (2.58.3-1) ... Purging configuration files for lintian (2.9.1) ... Purging configuration files for man-db (2.8.5-2) ... Purging configuration files for bsdmainutils (11.1.2+b1) ... Purging configuration files for pkg-config (0.29-6) ... Purging configuration files for autoconf (2.69-11) ... Purging configuration files for libc6:armhf (2.28-8) ... Purging configuration files for groff-base (1.22.4-3) ... +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any Build-Space: n/a Build-Time: 18 Distribution: unstable-amd64-sbuild Foreign Architectures: armhf Host Architecture: armhf Install-Time: 8 Job: /home/build/sbuild-setup/repo/pool/main/x/xinput/xinput_1.6.2-1.dsc Lintian: fail Machine Architecture: amd64 Package: xinput Package-Time: 30 Source-Version: 1.6.2-1 Space: n/a Status: successful Version: 1.6.2-1 -------------------------------------------------------------------------------- Finished at 2019-03-07T14:25:11Z Build needed 00:00:30, no disk space