sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 4be29f1fdf49

+==============================================================================+
| xpa 2.1.19-1 (armhf)                         Sat, 13 Jul 2019 13:51:55 +0000 |
+==============================================================================+

Package: xpa
Version: 2.1.19-1
Source Version: 2.1.19-1
Distribution: unstable-amd64-sbuild
Machine Architecture: amd64
Host Architecture: armhf
Build Architecture: amd64
Build Profiles: cross nocheck
Build Type: any

I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-b699df61-cc4b-4a36-b93f-a76ce1024576' with '<<CHROOT>>'
I: NOTICE: Log filtering will replace 'build/xpa-zYzs8A/resolver-QFwYyb' with '<<RESOLVERDIR>>'

+------------------------------------------------------------------------------+
| Update chroot                                                                |
+------------------------------------------------------------------------------+

Hit:1 http://cdn-fastly.deb.debian.org/debian unstable InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following package was automatically installed and is no longer required:
  sensible-utils
Use 'apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

+------------------------------------------------------------------------------+
| Fetch source files                                                           |
+------------------------------------------------------------------------------+


Local sources
-------------

/home/build/sbuild-setup/repo/pool/main/x/xpa/xpa_2.1.19-1.dsc exists in /home/build/sbuild-setup/repo/pool/main/x/xpa; copying to chroot
I: NOTICE: Log filtering will replace 'build/xpa-zYzs8A/xpa-2.1.19' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/xpa-zYzs8A' with '<<BUILDDIR>>'

+------------------------------------------------------------------------------+
| Install package build dependencies                                           |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: debhelper (>= 12), libxt-dev, tcl-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf
Filtered Build-Depends: debhelper (>= 12), libxt-dev, tcl-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [957 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [403 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [493 B]
Fetched 1853 B in 0s (112 kB/s)
Reading package lists...
Reading package lists...

Install main build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  autoconf automake autopoint autotools-dev binutils-arm-linux-gnueabihf
  bsdmainutils cpp-8-arm-linux-gnueabihf cpp-arm-linux-gnueabihf cross-config
  crossbuild-essential-armhf debhelper dh-autoreconf dh-strip-nondeterminism
  dpkg-cross dwz file g++-8-arm-linux-gnueabihf g++-arm-linux-gnueabihf
  gcc-8-arm-linux-gnueabihf gcc-8-arm-linux-gnueabihf-base gcc-8-base:armhf
  gcc-8-cross-base gcc-9-base:armhf gcc-9-cross-base gcc-arm-linux-gnueabihf
  gettext gettext-base groff-base intltool-debian libarchive-zip-perl
  libasan5:armhf libasan5-armhf-cross libatomic1:armhf libatomic1-armhf-cross
  libbsd0 libbsd0:armhf libc6:armhf libc6-armhf-cross libc6-dev:armhf
  libc6-dev-armhf-cross libconfig-auto-perl libconfig-inifiles-perl libcroco3
  libdebian-dpkgcross-perl libfile-homedir-perl
  libfile-stripnondeterminism-perl libfile-which-perl libgcc-8-dev:armhf
  libgcc-8-dev-armhf-cross libgcc1:armhf libgcc1-armhf-cross libglib2.0-0
  libgomp1:armhf libgomp1-armhf-cross libice-dev:armhf libice6:armhf libicu63
  libio-string-perl liblocale-gettext-perl libmagic-mgc libmagic1
  libmonkey-patch-perl libncurses6 libpipeline1 libpthread-stubs0-dev:armhf
  libsigsegv2 libsm-dev:armhf libsm6:armhf libstdc++-8-dev:armhf
  libstdc++-8-dev-armhf-cross libstdc++6:armhf libstdc++6-armhf-cross
  libsub-delete-perl libsub-identify-perl libsuper-perl libtcl8.6
  libtcl8.6:armhf libtool libubsan1:armhf libubsan1-armhf-cross libuchardet0
  libuuid1:armhf libx11-6:armhf libx11-data libx11-dev:armhf libxau-dev:armhf
  libxau6:armhf libxcb1:armhf libxcb1-dev:armhf libxdmcp-dev:armhf
  libxdmcp6:armhf libxml-libxml-perl libxml-namespacesupport-perl
  libxml-sax-base-perl libxml-sax-perl libxml-simple-perl libxml2
  libxt-dev:armhf libxt6:armhf libyaml-perl linux-libc-dev:armhf
  linux-libc-dev-armhf-cross m4 man-db po-debconf tcl tcl-dev:armhf tcl8.6
  tcl8.6-dev:armhf ucf x11-common x11proto-core-dev x11proto-dev
  xorg-sgml-doctools xtrans-dev zlib1g:armhf zlib1g-dev:armhf
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc binutils-doc wamerican
  | wordlist whois vacation gcc-8-locales cpp-doc dh-make binutils-multiarch
  gcc-8-doc libstdc++6-8-dbg-armhf-cross libgcc1-dbg-armhf-cross
  libgomp1-dbg-armhf-cross libitm1-dbg-armhf-cross libatomic1-dbg-armhf-cross
  libasan5-dbg-armhf-cross liblsan0-dbg-armhf-cross libtsan0-dbg-armhf-cross
  libubsan1-dbg-armhf-cross libmpx2-dbg-armhf-cross
  libquadmath0-dbg-armhf-cross manpages-dev flex bison gdb-arm-linux-gnueabihf
  gcc-doc gettext-doc libasprintf-dev libgettextpo-dev groff glibc-doc:armhf
  libc-l10n:armhf locales:armhf manpages-dev:armhf libice-doc:armhf
  libsm-doc:armhf libstdc++-8-doc:armhf libtool-doc gfortran
  | fortran95-compiler gcj-jdk libx11-doc:armhf libxcb-doc:armhf
  libxt-doc:armhf libyaml-shell-perl m4-doc apparmor less www-browser
  libmail-box-perl tcl-doc:armhf tcl-tclreadline tcl8.6-doc:armhf
Recommended packages:
  curl | wget | lynx libidn2-0:armhf libarchive-cpio-perl libglib2.0-data
  shared-mime-info xdg-user-dirs libgpm2 libltdl-dev uuid-runtime:armhf
  libwww-perl libxml-sax-expat-perl libyaml-libyaml-perl | libyaml-syck-perl
  libmail-sendmail-perl
The following NEW packages will be installed:
  autoconf automake autopoint autotools-dev binutils-arm-linux-gnueabihf
  bsdmainutils cpp-8-arm-linux-gnueabihf cpp-arm-linux-gnueabihf cross-config
  crossbuild-essential-armhf debhelper dh-autoreconf dh-strip-nondeterminism
  dpkg-cross dwz file g++-8-arm-linux-gnueabihf g++-arm-linux-gnueabihf
  gcc-8-arm-linux-gnueabihf gcc-8-arm-linux-gnueabihf-base gcc-8-base:armhf
  gcc-8-cross-base gcc-9-base:armhf gcc-9-cross-base gcc-arm-linux-gnueabihf
  gettext gettext-base groff-base intltool-debian libarchive-zip-perl
  libasan5:armhf libasan5-armhf-cross libatomic1:armhf libatomic1-armhf-cross
  libbsd0 libbsd0:armhf libc6:armhf libc6-armhf-cross libc6-dev:armhf
  libc6-dev-armhf-cross libconfig-auto-perl libconfig-inifiles-perl libcroco3
  libdebian-dpkgcross-perl libfile-homedir-perl
  libfile-stripnondeterminism-perl libfile-which-perl libgcc-8-dev:armhf
  libgcc-8-dev-armhf-cross libgcc1:armhf libgcc1-armhf-cross libglib2.0-0
  libgomp1:armhf libgomp1-armhf-cross libice-dev:armhf libice6:armhf libicu63
  libio-string-perl liblocale-gettext-perl libmagic-mgc libmagic1
  libmonkey-patch-perl libncurses6 libpipeline1 libpthread-stubs0-dev:armhf
  libsigsegv2 libsm-dev:armhf libsm6:armhf libstdc++-8-dev:armhf
  libstdc++-8-dev-armhf-cross libstdc++6:armhf libstdc++6-armhf-cross
  libsub-delete-perl libsub-identify-perl libsuper-perl libtcl8.6
  libtcl8.6:armhf libtool libubsan1:armhf libubsan1-armhf-cross libuchardet0
  libuuid1:armhf libx11-6:armhf libx11-data libx11-dev:armhf libxau-dev:armhf
  libxau6:armhf libxcb1:armhf libxcb1-dev:armhf libxdmcp-dev:armhf
  libxdmcp6:armhf libxml-libxml-perl libxml-namespacesupport-perl
  libxml-sax-base-perl libxml-sax-perl libxml-simple-perl libxml2
  libxt-dev:armhf libxt6:armhf libyaml-perl linux-libc-dev:armhf
  linux-libc-dev-armhf-cross m4 man-db po-debconf
  sbuild-build-depends-main-dummy:armhf tcl tcl-dev:armhf tcl8.6
  tcl8.6-dev:armhf ucf x11-common x11proto-core-dev x11proto-dev
  xorg-sgml-doctools xtrans-dev zlib1g:armhf zlib1g-dev:armhf
0 upgraded, 118 newly installed, 0 to remove and 0 not upgraded.
Need to get 2957 kB/68.0 MB of archives.
After this operation, 254 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [916 B]
Get:2 http://cdn-fastly.deb.debian.org/debian unstable/main armhf libtcl8.6 armhf 8.6.9+dfsg-2 [897 kB]
Get:3 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libtcl8.6 amd64 8.6.9+dfsg-2 [1005 kB]
Get:4 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 tcl8.6 amd64 8.6.9+dfsg-2 [123 kB]
Get:5 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 tcl amd64 8.6.9+1 [5636 B]
Get:6 http://cdn-fastly.deb.debian.org/debian unstable/main armhf tcl8.6-dev armhf 8.6.9+dfsg-2 [917 kB]
Get:7 http://cdn-fastly.deb.debian.org/debian unstable/main armhf tcl-dev armhf 8.6.9+1 [8192 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 2957 kB in 1s (2657 kB/s)
Selecting previously unselected package libbsd0:amd64.
(Reading database ... 12485 files and directories currently installed.)
Preparing to unpack .../000-libbsd0_0.9.1-2_amd64.deb ...
Unpacking libbsd0:amd64 (0.9.1-2) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../001-bsdmainutils_11.1.2+b1_amd64.deb ...
Unpacking bsdmainutils (11.1.2+b1) ...
Selecting previously unselected package libuchardet0:amd64.
Preparing to unpack .../002-libuchardet0_0.0.6-3_amd64.deb ...
Unpacking libuchardet0:amd64 (0.0.6-3) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../003-groff-base_1.22.4-3_amd64.deb ...
Unpacking groff-base (1.22.4-3) ...
Selecting previously unselected package libpipeline1:amd64.
Preparing to unpack .../004-libpipeline1_1.5.1-2_amd64.deb ...
Unpacking libpipeline1:amd64 (1.5.1-2) ...
Selecting previously unselected package man-db.
Preparing to unpack .../005-man-db_2.8.5-2_amd64.deb ...
Unpacking man-db (2.8.5-2) ...
Selecting previously unselected package liblocale-gettext-perl.
Preparing to unpack .../006-liblocale-gettext-perl_1.07-3+b4_amd64.deb ...
Unpacking liblocale-gettext-perl (1.07-3+b4) ...
Selecting previously unselected package gcc-9-base:armhf.
Preparing to unpack .../007-gcc-9-base_9.1.0-8_armhf.deb ...
Unpacking gcc-9-base:armhf (9.1.0-8) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../008-libmagic-mgc_1%3a5.35-4_amd64.deb ...
Unpacking libmagic-mgc (1:5.35-4) ...
Selecting previously unselected package libmagic1:amd64.
Preparing to unpack .../009-libmagic1_1%3a5.35-4_amd64.deb ...
Unpacking libmagic1:amd64 (1:5.35-4) ...
Selecting previously unselected package file.
Preparing to unpack .../010-file_1%3a5.35-4_amd64.deb ...
Unpacking file (1:5.35-4) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../011-gettext-base_0.19.8.1-9_amd64.deb ...
Unpacking gettext-base (0.19.8.1-9) ...
Selecting previously unselected package ucf.
Preparing to unpack .../012-ucf_3.0038+nmu1_all.deb ...
Moving old data out of the way
Unpacking ucf (3.0038+nmu1) ...
Selecting previously unselected package libsigsegv2:amd64.
Preparing to unpack .../013-libsigsegv2_2.12-2_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.12-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../014-m4_1.4.18-2_amd64.deb ...
Unpacking m4 (1.4.18-2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../015-autoconf_2.69-11_all.deb ...
Unpacking autoconf (2.69-11) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../016-autotools-dev_20180224.1_all.deb ...
Unpacking autotools-dev (20180224.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../017-automake_1%3a1.16.1-4_all.deb ...
Unpacking automake (1:1.16.1-4) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../018-autopoint_0.19.8.1-9_all.deb ...
Unpacking autopoint (0.19.8.1-9) ...
Selecting previously unselected package binutils-arm-linux-gnueabihf.
Preparing to unpack .../019-binutils-arm-linux-gnueabihf_2.32.51.20190707-1_amd64.deb ...
Unpacking binutils-arm-linux-gnueabihf (2.32.51.20190707-1) ...
Selecting previously unselected package gcc-8-arm-linux-gnueabihf-base:amd64.
Preparing to unpack .../020-gcc-8-arm-linux-gnueabihf-base_8.3.0-19cross1_amd64.deb ...
Unpacking gcc-8-arm-linux-gnueabihf-base:amd64 (8.3.0-19cross1) ...
Selecting previously unselected package cpp-8-arm-linux-gnueabihf.
Preparing to unpack .../021-cpp-8-arm-linux-gnueabihf_8.3.0-19cross1_amd64.deb ...
Unpacking cpp-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Selecting previously unselected package cpp-arm-linux-gnueabihf.
Preparing to unpack .../022-cpp-arm-linux-gnueabihf_4%3a8.3.0-1_amd64.deb ...
Unpacking cpp-arm-linux-gnueabihf (4:8.3.0-1) ...
Selecting previously unselected package cross-config.
Preparing to unpack .../023-cross-config_2.6.15-3_all.deb ...
Unpacking cross-config (2.6.15-3) ...
Selecting previously unselected package gcc-8-cross-base.
Preparing to unpack .../024-gcc-8-cross-base_8.3.0-19cross1_all.deb ...
Unpacking gcc-8-cross-base (8.3.0-19cross1) ...
Selecting previously unselected package gcc-9-cross-base.
Preparing to unpack .../025-gcc-9-cross-base_9.1.0-8cross1_all.deb ...
Unpacking gcc-9-cross-base (9.1.0-8cross1) ...
Selecting previously unselected package libc6-armhf-cross.
Preparing to unpack .../026-libc6-armhf-cross_2.28-10cross3_all.deb ...
Unpacking libc6-armhf-cross (2.28-10cross3) ...
Selecting previously unselected package libgcc1-armhf-cross.
Preparing to unpack .../027-libgcc1-armhf-cross_1%3a9.1.0-8cross1_all.deb ...
Unpacking libgcc1-armhf-cross (1:9.1.0-8cross1) ...
Selecting previously unselected package libgomp1-armhf-cross.
Preparing to unpack .../028-libgomp1-armhf-cross_9.1.0-8cross1_all.deb ...
Unpacking libgomp1-armhf-cross (9.1.0-8cross1) ...
Selecting previously unselected package libatomic1-armhf-cross.
Preparing to unpack .../029-libatomic1-armhf-cross_9.1.0-8cross1_all.deb ...
Unpacking libatomic1-armhf-cross (9.1.0-8cross1) ...
Selecting previously unselected package libasan5-armhf-cross.
Preparing to unpack .../030-libasan5-armhf-cross_9.1.0-8cross1_all.deb ...
Unpacking libasan5-armhf-cross (9.1.0-8cross1) ...
Selecting previously unselected package libstdc++6-armhf-cross.
Preparing to unpack .../031-libstdc++6-armhf-cross_9.1.0-8cross1_all.deb ...
Unpacking libstdc++6-armhf-cross (9.1.0-8cross1) ...
Selecting previously unselected package libubsan1-armhf-cross.
Preparing to unpack .../032-libubsan1-armhf-cross_9.1.0-8cross1_all.deb ...
Unpacking libubsan1-armhf-cross (9.1.0-8cross1) ...
Selecting previously unselected package libgcc-8-dev-armhf-cross.
Preparing to unpack .../033-libgcc-8-dev-armhf-cross_8.3.0-19cross1_all.deb ...
Unpacking libgcc-8-dev-armhf-cross (8.3.0-19cross1) ...
Selecting previously unselected package gcc-8-arm-linux-gnueabihf.
Preparing to unpack .../034-gcc-8-arm-linux-gnueabihf_8.3.0-19cross1_amd64.deb ...
Unpacking gcc-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Selecting previously unselected package gcc-arm-linux-gnueabihf.
Preparing to unpack .../035-gcc-arm-linux-gnueabihf_4%3a8.3.0-1_amd64.deb ...
Unpacking gcc-arm-linux-gnueabihf (4:8.3.0-1) ...
Selecting previously unselected package linux-libc-dev-armhf-cross.
Preparing to unpack .../036-linux-libc-dev-armhf-cross_4.19.37-5cross3_all.deb ...
Unpacking linux-libc-dev-armhf-cross (4.19.37-5cross3) ...
Selecting previously unselected package libc6-dev-armhf-cross.
Preparing to unpack .../037-libc6-dev-armhf-cross_2.28-10cross3_all.deb ...
Unpacking libc6-dev-armhf-cross (2.28-10cross3) ...
Selecting previously unselected package libstdc++-8-dev-armhf-cross.
Preparing to unpack .../038-libstdc++-8-dev-armhf-cross_8.3.0-19cross1_all.deb ...
Unpacking libstdc++-8-dev-armhf-cross (8.3.0-19cross1) ...
Selecting previously unselected package g++-8-arm-linux-gnueabihf.
Preparing to unpack .../039-g++-8-arm-linux-gnueabihf_8.3.0-19cross1_amd64.deb ...
Unpacking g++-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Selecting previously unselected package g++-arm-linux-gnueabihf.
Preparing to unpack .../040-g++-arm-linux-gnueabihf_4%3a8.3.0-1_amd64.deb ...
Unpacking g++-arm-linux-gnueabihf (4:8.3.0-1) ...
Selecting previously unselected package libconfig-inifiles-perl.
Preparing to unpack .../041-libconfig-inifiles-perl_3.000001-1_all.deb ...
Unpacking libconfig-inifiles-perl (3.000001-1) ...
Selecting previously unselected package libio-string-perl.
Preparing to unpack .../042-libio-string-perl_1.08-3_all.deb ...
Unpacking libio-string-perl (1.08-3) ...
Selecting previously unselected package libicu63:amd64.
Preparing to unpack .../043-libicu63_63.2-2_amd64.deb ...
Unpacking libicu63:amd64 (63.2-2) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../044-libxml2_2.9.4+dfsg1-7+b3_amd64.deb ...
Unpacking libxml2:amd64 (2.9.4+dfsg1-7+b3) ...
Selecting previously unselected package libxml-namespacesupport-perl.
Preparing to unpack .../045-libxml-namespacesupport-perl_1.12-1_all.deb ...
Unpacking libxml-namespacesupport-perl (1.12-1) ...
Selecting previously unselected package libxml-sax-base-perl.
Preparing to unpack .../046-libxml-sax-base-perl_1.09-1_all.deb ...
Unpacking libxml-sax-base-perl (1.09-1) ...
Selecting previously unselected package libxml-sax-perl.
Preparing to unpack .../047-libxml-sax-perl_1.00+dfsg-1_all.deb ...
Unpacking libxml-sax-perl (1.00+dfsg-1) ...
Selecting previously unselected package libxml-libxml-perl.
Preparing to unpack .../048-libxml-libxml-perl_2.0134+dfsg-1_amd64.deb ...
Unpacking libxml-libxml-perl (2.0134+dfsg-1) ...
Selecting previously unselected package libxml-simple-perl.
Preparing to unpack .../049-libxml-simple-perl_2.25-1_all.deb ...
Unpacking libxml-simple-perl (2.25-1) ...
Selecting previously unselected package libyaml-perl.
Preparing to unpack .../050-libyaml-perl_1.27-1_all.deb ...
Unpacking libyaml-perl (1.27-1) ...
Selecting previously unselected package libconfig-auto-perl.
Preparing to unpack .../051-libconfig-auto-perl_0.44-1_all.deb ...
Unpacking libconfig-auto-perl (0.44-1) ...
Selecting previously unselected package libfile-which-perl.
Preparing to unpack .../052-libfile-which-perl_1.23-1_all.deb ...
Unpacking libfile-which-perl (1.23-1) ...
Selecting previously unselected package libfile-homedir-perl.
Preparing to unpack .../053-libfile-homedir-perl_1.004-1_all.deb ...
Unpacking libfile-homedir-perl (1.004-1) ...
Selecting previously unselected package libdebian-dpkgcross-perl.
Preparing to unpack .../054-libdebian-dpkgcross-perl_2.6.15-3_all.deb ...
Unpacking libdebian-dpkgcross-perl (2.6.15-3) ...
Selecting previously unselected package dpkg-cross.
Preparing to unpack .../055-dpkg-cross_2.6.15-3_all.deb ...
Unpacking dpkg-cross (2.6.15-3) ...
Selecting previously unselected package crossbuild-essential-armhf.
Preparing to unpack .../056-crossbuild-essential-armhf_12.6_all.deb ...
Unpacking crossbuild-essential-armhf (12.6) ...
Selecting previously unselected package libtool.
Preparing to unpack .../057-libtool_2.4.6-10_all.deb ...
Unpacking libtool (2.4.6-10) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../058-dh-autoreconf_19_all.deb ...
Unpacking dh-autoreconf (19) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../059-libarchive-zip-perl_1.64-1_all.deb ...
Unpacking libarchive-zip-perl (1.64-1) ...
Selecting previously unselected package libsub-delete-perl.
Preparing to unpack .../060-libsub-delete-perl_1.00002-2_all.deb ...
Unpacking libsub-delete-perl (1.00002-2) ...
Selecting previously unselected package libsub-identify-perl.
Preparing to unpack .../061-libsub-identify-perl_0.14-1+b1_amd64.deb ...
Unpacking libsub-identify-perl (0.14-1+b1) ...
Selecting previously unselected package libsuper-perl.
Preparing to unpack .../062-libsuper-perl_1.20141117-1_all.deb ...
Unpacking libsuper-perl (1.20141117-1) ...
Selecting previously unselected package libmonkey-patch-perl.
Preparing to unpack .../063-libmonkey-patch-perl_0.03-2_all.deb ...
Unpacking libmonkey-patch-perl (0.03-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../064-libfile-stripnondeterminism-perl_1.2.0-2_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.2.0-2) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../065-dh-strip-nondeterminism_1.2.0-2_all.deb ...
Unpacking dh-strip-nondeterminism (1.2.0-2) ...
Selecting previously unselected package dwz.
Preparing to unpack .../066-dwz_0.12.20190711-1_amd64.deb ...
Unpacking dwz (0.12.20190711-1) ...
Selecting previously unselected package libglib2.0-0:amd64.
Preparing to unpack .../067-libglib2.0-0_2.58.3-3_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.58.3-3) ...
Selecting previously unselected package libcroco3:amd64.
Preparing to unpack .../068-libcroco3_0.6.12-3_amd64.deb ...
Unpacking libcroco3:amd64 (0.6.12-3) ...
Selecting previously unselected package libncurses6:amd64.
Preparing to unpack .../069-libncurses6_6.1+20181013-2_amd64.deb ...
Unpacking libncurses6:amd64 (6.1+20181013-2) ...
Selecting previously unselected package gettext.
Preparing to unpack .../070-gettext_0.19.8.1-9_amd64.deb ...
Unpacking gettext (0.19.8.1-9) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../071-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../072-po-debconf_1.0.21_all.deb ...
Unpacking po-debconf (1.0.21) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../073-debhelper_12.1.1_all.deb ...
Unpacking debhelper (12.1.1) ...
Selecting previously unselected package gcc-8-base:armhf.
Preparing to unpack .../074-gcc-8-base_8.3.0-19_armhf.deb ...
Unpacking gcc-8-base:armhf (8.3.0-19) ...
Selecting previously unselected package libgcc1:armhf.
Preparing to unpack .../075-libgcc1_1%3a9.1.0-8_armhf.deb ...
Unpacking libgcc1:armhf (1:9.1.0-8) ...
Selecting previously unselected package libc6:armhf.
Preparing to unpack .../076-libc6_2.28-10_armhf.deb ...
Unpacking libc6:armhf (2.28-10) ...
Selecting previously unselected package libasan5:armhf.
Preparing to unpack .../077-libasan5_9.1.0-8_armhf.deb ...
Unpacking libasan5:armhf (9.1.0-8) ...
Selecting previously unselected package libatomic1:armhf.
Preparing to unpack .../078-libatomic1_9.1.0-8_armhf.deb ...
Unpacking libatomic1:armhf (9.1.0-8) ...
Selecting previously unselected package libbsd0:armhf.
Preparing to unpack .../079-libbsd0_0.9.1-2_armhf.deb ...
Unpacking libbsd0:armhf (0.9.1-2) ...
Selecting previously unselected package linux-libc-dev:armhf.
Preparing to unpack .../080-linux-libc-dev_4.19.37-5_armhf.deb ...
Unpacking linux-libc-dev:armhf (4.19.37-5) ...
Selecting previously unselected package libc6-dev:armhf.
Preparing to unpack .../081-libc6-dev_2.28-10_armhf.deb ...
Unpacking libc6-dev:armhf (2.28-10) ...
Selecting previously unselected package libgomp1:armhf.
Preparing to unpack .../082-libgomp1_9.1.0-8_armhf.deb ...
Unpacking libgomp1:armhf (9.1.0-8) ...
Selecting previously unselected package libstdc++6:armhf.
Preparing to unpack .../083-libstdc++6_9.1.0-8_armhf.deb ...
Unpacking libstdc++6:armhf (9.1.0-8) ...
Selecting previously unselected package libubsan1:armhf.
Preparing to unpack .../084-libubsan1_9.1.0-8_armhf.deb ...
Unpacking libubsan1:armhf (9.1.0-8) ...
Selecting previously unselected package libgcc-8-dev:armhf.
Preparing to unpack .../085-libgcc-8-dev_8.3.0-19_armhf.deb ...
Unpacking libgcc-8-dev:armhf (8.3.0-19) ...
Selecting previously unselected package x11-common.
Preparing to unpack .../086-x11-common_1%3a7.7+19_all.deb ...
Unpacking x11-common (1:7.7+19) ...
Selecting previously unselected package libice6:armhf.
Preparing to unpack .../087-libice6_2%3a1.0.9-2_armhf.deb ...
Unpacking libice6:armhf (2:1.0.9-2) ...
Selecting previously unselected package xorg-sgml-doctools.
Preparing to unpack .../088-xorg-sgml-doctools_1%3a1.11-1_all.deb ...
Unpacking xorg-sgml-doctools (1:1.11-1) ...
Selecting previously unselected package x11proto-dev.
Preparing to unpack .../089-x11proto-dev_2018.4-4_all.deb ...
Unpacking x11proto-dev (2018.4-4) ...
Selecting previously unselected package x11proto-core-dev.
Preparing to unpack .../090-x11proto-core-dev_2018.4-4_all.deb ...
Unpacking x11proto-core-dev (2018.4-4) ...
Selecting previously unselected package libice-dev:armhf.
Preparing to unpack .../091-libice-dev_2%3a1.0.9-2_armhf.deb ...
Unpacking libice-dev:armhf (2:1.0.9-2) ...
Selecting previously unselected package libpthread-stubs0-dev:armhf.
Preparing to unpack .../092-libpthread-stubs0-dev_0.4-1_armhf.deb ...
Unpacking libpthread-stubs0-dev:armhf (0.4-1) ...
Selecting previously unselected package libuuid1:armhf.
Preparing to unpack .../093-libuuid1_2.33.1-0.1_armhf.deb ...
Unpacking libuuid1:armhf (2.33.1-0.1) ...
Selecting previously unselected package libsm6:armhf.
Preparing to unpack .../094-libsm6_2%3a1.2.3-1_armhf.deb ...
Unpacking libsm6:armhf (2:1.2.3-1) ...
Selecting previously unselected package libsm-dev:armhf.
Preparing to unpack .../095-libsm-dev_2%3a1.2.3-1_armhf.deb ...
Unpacking libsm-dev:armhf (2:1.2.3-1) ...
Selecting previously unselected package libstdc++-8-dev:armhf.
Preparing to unpack .../096-libstdc++-8-dev_8.3.0-19_armhf.deb ...
Unpacking libstdc++-8-dev:armhf (8.3.0-19) ...
Selecting previously unselected package zlib1g:armhf.
Preparing to unpack .../097-zlib1g_1%3a1.2.11.dfsg-1_armhf.deb ...
Unpacking zlib1g:armhf (1:1.2.11.dfsg-1) ...
Selecting previously unselected package libtcl8.6:armhf.
Preparing to unpack .../098-libtcl8.6_8.6.9+dfsg-2_armhf.deb ...
Unpacking libtcl8.6:armhf (8.6.9+dfsg-2) ...
Selecting previously unselected package libtcl8.6:amd64.
Preparing to unpack .../099-libtcl8.6_8.6.9+dfsg-2_amd64.deb ...
Unpacking libtcl8.6:amd64 (8.6.9+dfsg-2) ...
Selecting previously unselected package libxau6:armhf.
Preparing to unpack .../100-libxau6_1%3a1.0.8-1+b2_armhf.deb ...
Unpacking libxau6:armhf (1:1.0.8-1+b2) ...
Selecting previously unselected package libxdmcp6:armhf.
Preparing to unpack .../101-libxdmcp6_1%3a1.1.2-3_armhf.deb ...
Unpacking libxdmcp6:armhf (1:1.1.2-3) ...
Selecting previously unselected package libxcb1:armhf.
Preparing to unpack .../102-libxcb1_1.13.1-2_armhf.deb ...
Unpacking libxcb1:armhf (1.13.1-2) ...
Selecting previously unselected package libx11-data.
Preparing to unpack .../103-libx11-data_2%3a1.6.7-1_all.deb ...
Unpacking libx11-data (2:1.6.7-1) ...
Selecting previously unselected package libx11-6:armhf.
Preparing to unpack .../104-libx11-6_2%3a1.6.7-1_armhf.deb ...
Unpacking libx11-6:armhf (2:1.6.7-1) ...
Selecting previously unselected package libxau-dev:armhf.
Preparing to unpack .../105-libxau-dev_1%3a1.0.8-1+b2_armhf.deb ...
Unpacking libxau-dev:armhf (1:1.0.8-1+b2) ...
Selecting previously unselected package libxdmcp-dev:armhf.
Preparing to unpack .../106-libxdmcp-dev_1%3a1.1.2-3_armhf.deb ...
Unpacking libxdmcp-dev:armhf (1:1.1.2-3) ...
Selecting previously unselected package xtrans-dev.
Preparing to unpack .../107-xtrans-dev_1.3.5-1_all.deb ...
Unpacking xtrans-dev (1.3.5-1) ...
Selecting previously unselected package libxcb1-dev:armhf.
Preparing to unpack .../108-libxcb1-dev_1.13.1-2_armhf.deb ...
Unpacking libxcb1-dev:armhf (1.13.1-2) ...
Selecting previously unselected package libx11-dev:armhf.
Preparing to unpack .../109-libx11-dev_2%3a1.6.7-1_armhf.deb ...
Unpacking libx11-dev:armhf (2:1.6.7-1) ...
Selecting previously unselected package libxt6:armhf.
Preparing to unpack .../110-libxt6_1%3a1.1.5-1+b3_armhf.deb ...
Unpacking libxt6:armhf (1:1.1.5-1+b3) ...
Selecting previously unselected package libxt-dev:armhf.
Preparing to unpack .../111-libxt-dev_1%3a1.1.5-1+b3_armhf.deb ...
Unpacking libxt-dev:armhf (1:1.1.5-1+b3) ...
Selecting previously unselected package tcl8.6.
Preparing to unpack .../112-tcl8.6_8.6.9+dfsg-2_amd64.deb ...
Unpacking tcl8.6 (8.6.9+dfsg-2) ...
Selecting previously unselected package tcl.
Preparing to unpack .../113-tcl_8.6.9+1_amd64.deb ...
Unpacking tcl (8.6.9+1) ...
Selecting previously unselected package zlib1g-dev:armhf.
Preparing to unpack .../114-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ...
Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ...
Selecting previously unselected package tcl8.6-dev:armhf.
Preparing to unpack .../115-tcl8.6-dev_8.6.9+dfsg-2_armhf.deb ...
Unpacking tcl8.6-dev:armhf (8.6.9+dfsg-2) ...
Selecting previously unselected package tcl-dev:armhf.
Preparing to unpack .../116-tcl-dev_8.6.9+1_armhf.deb ...
Unpacking tcl-dev:armhf (8.6.9+1) ...
Selecting previously unselected package sbuild-build-depends-main-dummy:armhf.
Preparing to unpack .../117-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Setting up libconfig-inifiles-perl (3.000001-1) ...
Setting up libpipeline1:amd64 (1.5.1-2) ...
Setting up libfile-which-perl (1.23-1) ...
Setting up libc6-armhf-cross (2.28-10cross3) ...
Setting up libmagic-mgc (1:5.35-4) ...
Setting up libarchive-zip-perl (1.64-1) ...
Setting up libsub-identify-perl (0.14-1+b1) ...
Setting up libglib2.0-0:amd64 (2.58.3-3) ...
No schema files found: doing nothing.
Setting up gcc-8-cross-base (8.3.0-19cross1) ...
Setting up x11-common (1:7.7+19) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
invoke-rc.d: could not determine current runlevel
All runlevel operations denied by policy
invoke-rc.d: policy-rc.d denied execution of start.
Setting up libmagic1:amd64 (1:5.35-4) ...
Setting up linux-libc-dev:armhf (4.19.37-5) ...
Setting up libxml-namespacesupport-perl (1.12-1) ...
Setting up gettext-base (0.19.8.1-9) ...
Setting up file (1:5.35-4) ...
Setting up libyaml-perl (1.27-1) ...
Setting up libpthread-stubs0-dev:armhf (0.4-1) ...
Setting up libicu63:amd64 (63.2-2) ...
Setting up libxml-sax-base-perl (1.09-1) ...
Setting up libio-string-perl (1.08-3) ...
Setting up xtrans-dev (1.3.5-1) ...
Setting up autotools-dev (20180224.1) ...
Setting up cross-config (2.6.15-3) ...
Setting up libx11-data (2:1.6.7-1) ...
Setting up gcc-8-arm-linux-gnueabihf-base:amd64 (8.3.0-19cross1) ...
Setting up libncurses6:amd64 (6.1+20181013-2) ...
Setting up libsigsegv2:amd64 (2.12-2) ...
Setting up gcc-8-base:armhf (8.3.0-19) ...
Setting up libtcl8.6:amd64 (8.6.9+dfsg-2) ...
Setting up linux-libc-dev-armhf-cross (4.19.37-5cross3) ...
Setting up autopoint (0.19.8.1-9) ...
Setting up ucf (3.0038+nmu1) ...
Setting up gcc-9-cross-base (9.1.0-8cross1) ...
Setting up libsub-delete-perl (1.00002-2) ...
Setting up dwz (0.12.20190711-1) ...
Setting up libuchardet0:amd64 (0.0.6-3) ...
Setting up xorg-sgml-doctools (1:1.11-1) ...
Setting up libfile-homedir-perl (1.004-1) ...
Setting up libbsd0:amd64 (0.9.1-2) ...
Setting up binutils-arm-linux-gnueabihf (2.32.51.20190707-1) ...
Setting up libxml2:amd64 (2.9.4+dfsg1-7+b3) ...
Setting up liblocale-gettext-perl (1.07-3+b4) ...
Setting up gcc-9-base:armhf (9.1.0-8) ...
Setting up cpp-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Setting up libgomp1-armhf-cross (9.1.0-8cross1) ...
Setting up x11proto-dev (2018.4-4) ...
Setting up tcl8.6 (8.6.9+dfsg-2) ...
Setting up libsuper-perl (1.20141117-1) ...
Setting up libtool (2.4.6-10) ...
Setting up libc6-dev-armhf-cross (2.28-10cross3) ...
Setting up m4 (1.4.18-2) ...
Setting up libatomic1-armhf-cross (9.1.0-8cross1) ...
Setting up libxml-sax-perl (1.00+dfsg-1) ...
update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...

Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version
Setting up libgcc1-armhf-cross (1:9.1.0-8cross1) ...
Setting up x11proto-core-dev (2018.4-4) ...
Setting up bsdmainutils (11.1.2+b1) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up libcroco3:amd64 (0.6.12-3) ...
Setting up autoconf (2.69-11) ...
Setting up libxml-libxml-perl (2.0134+dfsg-1) ...
update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50...
update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version
Setting up groff-base (1.22.4-3) ...
Setting up tcl (8.6.9+1) ...
Setting up cpp-arm-linux-gnueabihf (4:8.3.0-1) ...
Setting up libmonkey-patch-perl (0.03-2) ...
Setting up automake (1:1.16.1-4) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.2.0-2) ...
Setting up gettext (0.19.8.1-9) ...
Setting up man-db (2.8.5-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libasan5-armhf-cross (9.1.0-8cross1) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up libstdc++6-armhf-cross (9.1.0-8cross1) ...
Setting up libubsan1-armhf-cross (9.1.0-8cross1) ...
Setting up libxml-simple-perl (2.25-1) ...
Setting up libgcc-8-dev-armhf-cross (8.3.0-19cross1) ...
Setting up libstdc++-8-dev-armhf-cross (8.3.0-19cross1) ...
Setting up gcc-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Setting up gcc-arm-linux-gnueabihf (4:8.3.0-1) ...
Setting up po-debconf (1.0.21) ...
Setting up libconfig-auto-perl (0.44-1) ...
Setting up g++-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Setting up libdebian-dpkgcross-perl (2.6.15-3) ...
Setting up g++-arm-linux-gnueabihf (4:8.3.0-1) ...
Setting up dpkg-cross (2.6.15-3) ...
Setting up crossbuild-essential-armhf (12.6) ...
Setting up libc6:armhf (2.28-10) ...
Setting up libc6-dev:armhf (2.28-10) ...
Setting up libbsd0:armhf (0.9.1-2) ...
Setting up libice6:armhf (2:1.0.9-2) ...
Setting up libxau6:armhf (1:1.0.8-1+b2) ...
Setting up libxdmcp6:armhf (1:1.1.2-3) ...
Setting up libxcb1:armhf (1.13.1-2) ...
Setting up libxau-dev:armhf (1:1.0.8-1+b2) ...
Setting up libice-dev:armhf (2:1.0.9-2) ...
Setting up libgcc1:armhf (1:9.1.0-8) ...
Setting up zlib1g:armhf (1:1.2.11.dfsg-1) ...
Setting up libgomp1:armhf (9.1.0-8) ...
Setting up dh-autoreconf (19) ...
Setting up libasan5:armhf (9.1.0-8) ...
Setting up libxdmcp-dev:armhf (1:1.1.2-3) ...
Setting up libatomic1:armhf (9.1.0-8) ...
Setting up libuuid1:armhf (2.33.1-0.1) ...
Setting up libtcl8.6:armhf (8.6.9+dfsg-2) ...
Setting up dh-strip-nondeterminism (1.2.0-2) ...
Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ...
Setting up libx11-6:armhf (2:1.6.7-1) ...
Setting up libsm6:armhf (2:1.2.3-1) ...
Setting up libstdc++6:armhf (9.1.0-8) ...
Setting up libxcb1-dev:armhf (1.13.1-2) ...
Setting up libsm-dev:armhf (2:1.2.3-1) ...
Setting up tcl8.6-dev:armhf (8.6.9+dfsg-2) ...
Setting up libx11-dev:armhf (2:1.6.7-1) ...
Setting up debhelper (12.1.1) ...
Setting up libxt6:armhf (1:1.1.5-1+b3) ...
Setting up tcl-dev:armhf (8.6.9+1) ...
Setting up libubsan1:armhf (9.1.0-8) ...
Setting up libxt-dev:armhf (1:1.1.5-1+b3) ...
Setting up libgcc-8-dev:armhf (8.3.0-19) ...
Setting up libstdc++-8-dev:armhf (8.3.0-19) ...
Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Processing triggers for libc-bin (2.28-10) ...
Processing triggers for ccache (3.7.1-1) ...
Updating symlinks in /usr/lib/ccache ...

+------------------------------------------------------------------------------+
| Check architectures                                                          |
+------------------------------------------------------------------------------+

Initial Foreign Architectures: armhf 
Arch check ok (armhf included in any)

+------------------------------------------------------------------------------+
| Build environment                                                            |
+------------------------------------------------------------------------------+

Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64)
Toolchain package versions: binutils_2.32.51.20190707-1 dpkg-dev_1.19.7 g++-8_8.3.0-19 gcc-8_8.3.0-19 libc6-dev_2.28-10 libstdc++-8-dev_8.3.0-19 libstdc++-8-dev-armhf-cross_8.3.0-19cross1 libstdc++6_9.1.0-8 libstdc++6-armhf-cross_9.1.0-8cross1 linux-libc-dev_4.19.37-5
Package versions: adduser_3.118 apt_1.8.2 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_11 base-passwd_3.5.46 bash_5.0-4 binutils_2.32.51.20190707-1 binutils-arm-linux-gnueabihf_2.32.51.20190707-1 binutils-common_2.32.51.20190707-1 binutils-x86-64-linux-gnu_2.32.51.20190707-1 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.6 bzip2_1.0.6-9.2 ccache_3.7.1-1 coreutils_8.30-3 cpp_4:8.3.0-1 cpp-8_8.3.0-19 cpp-8-arm-linux-gnueabihf_8.3.0-19cross1 cpp-arm-linux-gnueabihf_4:8.3.0-1 cross-config_2.6.15-3 crossbuild-essential-armhf_12.6 dash_0.5.10.2-5 debconf_1.5.72 debhelper_12.1.1 debian-archive-keyring_2019.1 debianutils_4.8.6.2 dh-autoreconf_19 dh-strip-nondeterminism_1.2.0-2 diffutils_1:3.7-3 dirmngr_2.2.17-1 dose-distcheck_5.0.1-12 dpkg_1.19.7 dpkg-cross_2.6.15-3 dpkg-dev_1.19.7 dwz_0.12.20190711-1 e2fsprogs_1.45.2-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-4 findutils_4.6.0+git+20190510-2 g++_4:8.3.0-1 g++-8_8.3.0-19 g++-8-arm-linux-gnueabihf_8.3.0-19cross1 g++-arm-linux-gnueabihf_4:8.3.0-1 gcc_4:8.3.0-1 gcc-8_8.3.0-19 gcc-8-arm-linux-gnueabihf_8.3.0-19cross1 gcc-8-arm-linux-gnueabihf-base_8.3.0-19cross1 gcc-8-base_8.3.0-19 gcc-8-cross-base_8.3.0-19cross1 gcc-9-base_9.1.0-8 gcc-9-cross-base_9.1.0-8cross1 gcc-arm-linux-gnueabihf_4:8.3.0-1 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.17-1 gnupg-l10n_2.2.17-1 gnupg-utils_2.2.17-1 gpg_2.2.17-1 gpg-agent_2.2.17-1 gpg-wks-client_2.2.17-1 gpg-wks-server_2.2.17-1 gpgconf_2.2.17-1 gpgsm_2.2.17-1 gpgv_2.2.17-1 grep_3.3-1 groff-base_1.22.4-3 gzip_1.9-3 hostname_3.21 init-system-helpers_1.57 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-4 libapt-pkg5.0_1.8.2 libarchive-zip-perl_1.64-1 libasan5_9.1.0-8 libasan5-armhf-cross_9.1.0-8cross1 libassuan0_2.5.3-2 libatomic1_9.1.0-8 libatomic1-armhf-cross_9.1.0-8cross1 libattr1_1:2.4.48-4 libaudit-common_1:2.8.5-1 libaudit1_1:2.8.5-1 libbinutils_2.32.51.20190707-1 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9.2 libc-bin_2.28-10 libc-dev-bin_2.28-10 libc6_2.28-10 libc6-armhf-cross_2.28-10cross3 libc6-dev_2.28-10 libc6-dev-armhf-cross_2.28-10cross3 libcap-ng0_0.7.9-2 libcap2_1:2.25-2 libcc1-0_9.1.0-8 libcom-err2_1.45.2-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libdb5.3_5.3.28+dfsg1-0.6 libdebconfclient0_0.249 libdebian-dpkgcross-perl_2.6.15-3 libdpkg-perl_1.19.7 libeatmydata1_105-7 libelf1_0.176-1.1 libext2fs2_1.45.2-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-stripnondeterminism-perl_1.2.0-2 libfile-which-perl_1.23-1 libgcc-8-dev_8.3.0-19 libgcc-8-dev-armhf-cross_8.3.0-19cross1 libgcc1_1:9.1.0-8 libgcc1-armhf-cross_1:9.1.0-8cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-4 libgdbm6_1.18.1-4 libglib2.0-0_2.58.3-3 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.8-2 libgomp1_9.1.0-8 libgomp1-armhf-cross_9.1.0-8cross1 libgpg-error0_1.36-2 libhogweed4_3.4.1-1 libice-dev_2:1.0.9-2 libice6_2:1.0.9-2 libicu63_63.2-2 libidn2-0_2.0.5-1 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_9.1.0-8 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_9.1.0-8 liblua5.2-0_5.2.4-1.1+b2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-4 libmagic1_1:5.35-4 libmonkey-patch-perl_0.03-2 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libmpx2_8.3.0-19 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnettle6_3.4.1-1 libnpth0_1.6-1 libnspr4_2:4.21-1 libnss3_2:3.45-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre2-8-0_10.32-5 libpcre3_2:8.39-12 libperl5.28_5.28.1-6 libpipeline1_1.5.1-2 libpopt0_1.16-12 libpthread-stubs0-dev_0.4-1 libquadmath0_9.1.0-8 libreadline7_7.0-5 libreadline8_8.0-2 librpm8_4.14.2.1+dfsg1-1 librpmio8_4.14.2.1+dfsg1-1 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.9-2 libsemanage-common_2.9-2 libsemanage1_2.9-2 libsepol1_2.9-2 libsigsegv2_2.12-2 libsm-dev_2:1.2.3-1 libsm6_2:1.2.3-1 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.29.0-1 libss2_1.45.2-1 libstdc++-8-dev_8.3.0-19 libstdc++-8-dev-armhf-cross_8.3.0-19cross1 libstdc++6_9.1.0-8 libstdc++6-armhf-cross_9.1.0-8cross1 libsub-delete-perl_1.00002-2 libsub-identify-perl_0.14-1+b1 libsuper-perl_1.20141117-1 libsystemd0_241-6 libtasn1-6_4.13-3 libtcl8.6_8.6.9+dfsg-2 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtsan0_9.1.0-8 libubsan1_9.1.0-8 libubsan1-armhf-cross_9.1.0-8cross1 libuchardet0_0.0.6-3 libudev1_241-6 libunistring2_0.9.10-2 libuuid1_2.33.1-0.1 libx11-6_2:1.6.7-1 libx11-data_2:1.6.7-1 libx11-dev_2:1.6.7-1 libxau-dev_1:1.0.8-1+b2 libxau6_1:1.0.8-1+b2 libxcb1_1.13.1-2 libxcb1-dev_1.13.1-2 libxdmcp-dev_1:1.1.2-3 libxdmcp6_1:1.1.2-3 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-sax-base-perl_1.09-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libxt-dev_1:1.1.5-1+b3 libxt6_1:1.1.5-1+b3 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.37-5 linux-libc-dev-armhf-cross_4.19.37-5cross3 login_1:4.7-1 lsb-base_10.2019051400 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mawk_1.3.3-17+b3 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 passwd_1:4.7-1 patch_2.7.6-4 perl_5.28.1-6 perl-base_5.28.1-6 perl-modules-5.28_5.28.1-6 pinentry-curses_1.1.0-2 po-debconf_1.0.21 readline-common_8.0-2 sbuild-build-depends-dose3-dummy_0.invalid.0 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-6 tcl_8.6.9+1 tcl-dev_8.6.9+1 tcl8.6_8.6.9+dfsg-2 tcl8.6-dev_8.6.9+dfsg-2 tzdata_2019b-1 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 x11-common_1:7.7+19 x11proto-core-dev_2018.4-4 x11proto-dev_2018.4-4 xorg-sgml-doctools_1:1.11-1 xtrans-dev_1.3.5-1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1 zlib1g-dev_1:1.2.11.dfsg-1

+------------------------------------------------------------------------------+
| Build                                                                        |
+------------------------------------------------------------------------------+


Unpack source
-------------

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 3.0 (quilt)
Source: xpa
Binary: libxpa1, libxpa-dev, xpa-tools, tcl-xpa
Architecture: any
Version: 2.1.19-1
Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
Uploaders: Ole Streicher <olebole@debian.org>
Homepage: https://hea-www.harvard.edu/RD/xpa/
Standards-Version: 4.4.0
Vcs-Browser: https://salsa.debian.org/debian-astro-team/xpa
Vcs-Git: https://salsa.debian.org/debian-astro-team/xpa.git
Testsuite: autopkgtest
Testsuite-Triggers: gcc, libc6-dev
Build-Depends: debhelper (>= 12), libxt-dev, tcl-dev
Package-List:
 libxpa-dev deb libdevel optional arch=any
 libxpa1 deb libs optional arch=any
 tcl-xpa deb interpreters optional arch=any
 xpa-tools deb science optional arch=any
Checksums-Sha1:
 d5a4a7351270b684306a639f31dadabcce4d96fb 902344 xpa_2.1.19.orig.tar.gz
 e1f3d77de9d769a8e9bc7799177a472a2b74bc65 14080 xpa_2.1.19-1.debian.tar.xz
Checksums-Sha256:
 44f1059009a7afe12029b808212393e352b3fa61701615350752ecf6c802ea48 902344 xpa_2.1.19.orig.tar.gz
 ac69f3a9706483774fb255dfdb2675b8e660b495cf86d4e0d7db40438dc78be2 14080 xpa_2.1.19-1.debian.tar.xz
Files:
 54bac968cc74d1c616f276c5e8570e2a 902344 xpa_2.1.19.orig.tar.gz
 bfc897c1fff593f98336b92314ccaac7 14080 xpa_2.1.19-1.debian.tar.xz

-----BEGIN PGP SIGNATURE-----
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=eoQp
-----END PGP SIGNATURE-----

gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error
gpgv: Signature made Fri Jul 12 15:11:23 2019 UTC
gpgv:                using RSA key EFF06957445ADBF8742F7AAD9A4F56BDB90E18BD
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./xpa_2.1.19-1.dsc
dpkg-source: info: extracting xpa in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking xpa_2.1.19.orig.tar.gz
dpkg-source: info: unpacking xpa_2.1.19-1.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying Fix-the-paths-for-a-chroot-build-and-for-FHS.patch
dpkg-source: info: applying Fix-manpages-section-name-and-spellfixes.patch
dpkg-source: info: applying Add-a-description-to-AC_DEFINEs.patch
dpkg-source: info: applying Install-the-tcl-interface-to-usr-lib-tcltk-xpa-according-.patch
dpkg-source: info: applying Add-hardening-flags.patch
dpkg-source: info: applying Sort-.o-files.patch
dpkg-source: info: applying Recognise-the-exit-status-of-mklibs.patch
dpkg-source: info: applying make-mklib-work-with-cross-compilation.patch
dpkg-source: info: applying Remove-uintptr_t-cast.patch

Check disk space
----------------

Sufficient free space for build

User Environment
----------------

APT_CONFIG=/var/lib/sbuild/apt.conf
CCACHE_COMPRESS=1
CCACHE_DIR=/var/cache/ccache-sbuild
CCACHE_UMASK=002
CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf
DEB_BUILD_OPTIONS=nocheck
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LD_LIBRARY_PATH=/usr/lib/libeatmydata
LD_PRELOAD=libeatmydata.so
LOGNAME=build
PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/<<PKGBUILDDIR>>
SCHROOT_ALIAS_NAME=unstable-amd64-sbuild
SCHROOT_CHROOT_NAME=unstable-amd64-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=1000
SCHROOT_GROUP=build
SCHROOT_SESSION_ID=unstable-amd64-sbuild-b699df61-cc4b-4a36-b93f-a76ce1024576
SCHROOT_UID=1000
SCHROOT_USER=build
SHELL=/bin/sh
USER=build

dpkg-buildpackage
-----------------

Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16
dpkg-buildpackage: info: source package xpa
dpkg-buildpackage: info: source version 2.1.19-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Ole Streicher <olebole@debian.org>
dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
 dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
 fakeroot debian/rules clean
dh clean --with autoreconf
   dh_clean
 debian/rules build-arch
dh build-arch --with autoreconf
   dh_update_autotools_config -a
   dh_autoreconf -a
   debian/rules override_dh_auto_configure
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_configure -- --enable-shared=link --with-threads --with-tclconfig=/usr/lib --with-tcl=/usr/include/tcl
	./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --host=arm-linux-gnueabihf --enable-shared=link --with-threads --with-tclconfig=/usr/lib --with-tcl=/usr/include/tcl
configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode, --disable-dependency-tracking, --with-tclconfig
configure: loading site script /etc/dpkg-cross/cross-config.armhf
checking build system type... x86_64-pc-linux-gnu
checking host system type... arm-unknown-linux-gnueabihf
checking for arm-linux-gnueabihf-gcc... arm-linux-gnueabihf-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether arm-linux-gnueabihf-gcc accepts -g... yes
checking for arm-linux-gnueabihf-gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... arm-linux-gnueabihf-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking size of long... (cached) 4
checking for arm-linux-gnueabihf-ranlib... arm-linux-gnueabihf-ranlib
checking for ANSI C header files... (cached) yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking pwd.h usability... yes
checking pwd.h presence... yes
checking for pwd.h... yes
checking values.h usability... yes
checking values.h presence... yes
checking for values.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking setjmp.h usability... yes
checking setjmp.h presence... yes
checking for setjmp.h... yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking sys/shm.h usability... yes
checking sys/shm.h presence... yes
checking for sys/shm.h... yes
checking sys/mman.h usability... yes
checking sys/mman.h presence... yes
checking for sys/mman.h... yes
checking sys/ipc.h usability... yes
checking sys/ipc.h presence... yes
checking for sys/ipc.h... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking for socklen_t... yes
checking for an ANSI C-conforming const... yes
checking for strchr... yes
checking for memcpy... yes
checking for snprintf... yes
checking for atexit... yes
checking for setenv... yes
checking for getaddrinfo... yes
checking for connect... yes
checking for gethostbyname... yes
checking for threaded xpans... no
checking for shared library build... link
checking for request to use posix_spawn... no
checking for X... libraries , headers 
checking for gethostbyname... (cached) yes
checking for connect... (cached) yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for Tcl configuration... /usr/include/tcl directory doesn't contain tclConfig.sh
found /usr/lib/tclConfig.sh
checking for existence of /usr/lib/tclConfig.sh... loading
warning: tcl.h not found with --with-tcl ... tcl build might fail
checking for incorporation of thread support... yes
checking for gtk... no
checking linux-gnueabihf configuration... adding -fPIC to gcc
configure: creating ./config.status
config.status: creating Makefile
config.status: creating xpa.pc
config.status: creating conf.h
configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode, --disable-dependency-tracking, --with-tclconfig
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   debian/rules override_dh_auto_build
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_build -- All tclxpa
	make -j16 All tclxpa
make[2]: Entering directory '/<<PKGBUILDDIR>>'
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H tcp.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H word.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xalloc.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H find.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xlaunch.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H timedconn.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H ctest.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H  stest.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H  rtest.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xpa.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xpaio.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H command.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H acl.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H remote.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H clipboard.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H port.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H client.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H  xtloop.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H  gtkloop.c
remote.c: In function ‘XPARemote’:
remote.c:256:33: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4094 [-Wformat-truncation=]
  snprintf(lbuf, SZ_LINE, "%s:%s %s %s",
                                 ^~
    cur->xclass, cur->name, mach, acl);
                            ~~~~  
remote.c:256:26: note: assuming directive output of 1 byte
  snprintf(lbuf, SZ_LINE, "%s:%s %s %s",
                          ^~~~~~~~~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from remote.c:11:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 4 or more bytes (assuming 4100) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
remote.c:232:38: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4094 [-Wformat-truncation=]
       snprintf(lbuf, SZ_LINE, "%s:%s %s %s",
                                      ^~
         cur->xclass, cur->name, mach, acl);
                                 ~~~~  
remote.c:232:31: note: assuming directive output of 1 byte
       snprintf(lbuf, SZ_LINE, "%s:%s %s %s",
                               ^~~~~~~~~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from remote.c:11:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 4 or more bytes (assuming 4100) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
remote.c: In function ‘XPAReceiveRemote’:
remote.c:107:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4083 [-Wformat-truncation=]
       snprintf(tbuf, SZ_LINE, "remote xpans %s failed to process %s\n",
                                             ^~
         host, xpa->name);
         ~~~~                                 
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from remote.c:11:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 34 or more bytes (assuming 4129) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
clipboard.c: In function ‘XPAReceiveClipboard’:
clipboard.c:252:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4061 [-Wformat-truncation=]
         "XPA clipboard invalid cmd or name: %s %s\n", cmd, name);
                                             ^~        ~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from clipboard.c:11:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 38 and 8228 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
clipboard.c: In function ‘XPASendClipboard’:
clipboard.c:308:60: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4068 [-Wformat-truncation=]
       snprintf(tbuf, SZ_LINE, "XPA clipboard invalid name: %s\n", name);
                                                            ^~     ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from clipboard.c:11:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 30 and 4125 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xpaset.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xpaget.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xpainfo.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xpaaccess.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xpans.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H xpamb.c
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H -I/usr/include/tcl8.6 -DUSE_TCL_STUBS=1 tclloop.c
acl.c: In function ‘XPAReceiveAcl’:
acl.c:174:38: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4094 [-Wformat-truncation=]
       snprintf(tbuf, SZ_LINE, "%s:%s %s\n", xpa->xclass, xpa->name, lbuf);
                                      ^~                             ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from acl.c:11:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 4 or more bytes (assuming 4099) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
acl.c:166:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4083 [-Wformat-truncation=]
       snprintf(lbuf, SZ_LINE, "invalid acl: %s\n", tbuf);
                                             ^~     ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from acl.c:11:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 15 and 4110 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arm-linux-gnueabihf-gcc -c -I. -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -fPIC -Wdate-time -D_FORTIFY_SOURCE=2 -DHAVE_CONFIG_H -I/usr/include/tcl8.6 -DUSE_TCL_STUBS=1 tcl.c
command.c: In function ‘XPAReceiveEnv’:
command.c:197:35: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
       snprintf(tbuf, SZ_LINE, "%s=%s", name, value);
                                   ^~         ~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from command.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 2 and 8192 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c: In function ‘send_cb’:
stest.c:138:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
       fgets(tbuf, SZ_LINE, stdin);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:145:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
       fgets(tbuf, SZ_LINE, stdin);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:155:4: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
    system(&paramlist[5]);
    ^~~~~~~~~~~~~~~~~~~~~
stest.c:183:4: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
    write(fileno(stdout), errs[i], strlen(errs[i]));
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:196:5: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
     fgets(tbuf, SZ_LINE, stdin);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c: In function ‘receive_cb’:
stest.c:325:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
       fgets(tbuf, SZ_LINE, stdin);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:332:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
       fgets(tbuf, SZ_LINE, stdin);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:342:4: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
    system(&paramlist[5]);
    ^~~~~~~~~~~~~~~~~~~~~
stest.c:381:5: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
     fgets(tbuf, SZ_LINE, stdin);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:395:2: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
  fgets(cbuf, SZ_LINE, stdin);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c: In function ‘info_cb’:
stest.c:482:4: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
    write(fileno(stdout), errs[i], strlen(errs[i]));
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c: In function ‘main’:
stest.c:673:5: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
     system(cmd);
     ^~~~~~~~~~~
stest.c:614:38: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4087 [-Wformat-truncation=]
   snprintf(tbuf2, SZ_LINE, "help for %s", tbuf);
                                      ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from stest.c:10:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 10 and 4105 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:626:33: warning: ‘__builtin___snprintf_chk’ output may be truncated before the last format character [-Wformat-truncation=]
     snprintf(tbuf, SZ_LINE, "%s1", name);
                                 ^
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from stest.c:10:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 2 and 4097 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:627:40: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4087 [-Wformat-truncation=]
     snprintf(tbuf2, SZ_LINE, "help for %s", tbuf);
                                        ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from stest.c:10:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 10 and 4105 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:639:32: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4094 [-Wformat-truncation=]
     snprintf(tbuf, SZ_LINE, "c_%s", name);
                                ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from stest.c:10:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 3 and 4098 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
stest.c:661:32: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4094 [-Wformat-truncation=]
     snprintf(tbuf, SZ_LINE, "i_%s", name);
                                ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from stest.c:10:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 3 and 4098 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c: In function ‘send_cb’:
ctest.c:73:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
       fgets(tbuf, SZ_LINE, stdin);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:78:5: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
     fgets(tbuf, SZ_LINE, stdin);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c: In function ‘receive_cb’:
ctest.c:183:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
       fgets(tbuf, SZ_LINE, stdin);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:216:5: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
     fgets(tbuf, SZ_LINE, stdin);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:231:2: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
  fgets(tbuf, SZ_LINE, stdin);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c: In function ‘info_cb’:
ctest.c:298:6: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
      write(fileno(stdout), bufs[i], lens[i]);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:304:4: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
    write(fileno(stdout), errs[i], strlen(errs[i]));
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c: In function ‘main’:
ctest.c:481:5: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
     system(cmd);
     ^~~~~~~~~~~
ctest.c:551:3: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
   write(fileno(stdout), bufs[i], lens[i]);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:557:8: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
        write(fileno(stdout), errs[i], strlen(errs[i]));
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:591:4: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
    write(fileno(stdout), errs[i], strlen(errs[i]));
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:609:6: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
      write(fileno(stdout), errs[i], strlen(errs[i]));
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:628:6: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
      write(fileno(stdout), errs[i], strlen(errs[i]));
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:658:7: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
       fgets(tbuf, SZ_LINE, stdin);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~
ctest.c:504:32: warning: ‘ from ctest’ directive output may be truncated writing 11 bytes into a region of size between 1 and 4096 [-Wformat-truncation=]
     snprintf(tbuf, SZ_LINE, "%s from ctest", name);
                                ^~~~~~~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from ctest.c:10:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 12 and 4107 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpaget.c: In function ‘main’:
xpaget.c:117:46: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4078 [-Wformat-truncation=]
    snprintf(cmd, SZ_LINE, "XPA_SHORT_TIMEOUT=%s", xbuf);
                                              ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpaget.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 19 and 4114 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpaget.c:121:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4079 [-Wformat-truncation=]
    snprintf(cmd, SZ_LINE, "XPA_LONG_TIMEOUT=%s", xbuf);
                                             ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpaget.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 18 and 4113 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpaaccess.c: In function ‘main’:
xpaaccess.c:119:46: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4078 [-Wformat-truncation=]
    snprintf(cmd, SZ_LINE, "XPA_SHORT_TIMEOUT=%s", xbuf);
                                              ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpaaccess.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 19 and 4114 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpaaccess.c:123:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4079 [-Wformat-truncation=]
    snprintf(cmd, SZ_LINE, "XPA_LONG_TIMEOUT=%s", xbuf);
                                             ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpaaccess.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 18 and 4113 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpaset.c: In function ‘main’:
xpaset.c:126:46: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4078 [-Wformat-truncation=]
    snprintf(cmd, SZ_LINE, "XPA_SHORT_TIMEOUT=%s", xbuf);
                                              ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpaset.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 19 and 4114 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpaset.c:130:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4079 [-Wformat-truncation=]
    snprintf(cmd, SZ_LINE, "XPA_LONG_TIMEOUT=%s", xbuf);
                                             ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpaset.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 18 and 4113 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpainfo.c: In function ‘main’:
xpainfo.c:115:46: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4078 [-Wformat-truncation=]
    snprintf(cmd, SZ_LINE, "XPA_SHORT_TIMEOUT=%s", xbuf);
                                              ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpainfo.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 19 and 4114 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpainfo.c:119:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4079 [-Wformat-truncation=]
    snprintf(cmd, SZ_LINE, "XPA_LONG_TIMEOUT=%s", xbuf);
                                             ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpainfo.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 18 and 4113 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpamb.c: In function ‘MBRecCB’:
xpamb.c:232:62: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4068 [-Wformat-truncation=]
       snprintf(errbuf, SZ_LINE, "xpamb entry already exists: %s", name);
                                                              ^~
xpamb.c:566:20:
     status = MBAdd(xadd, xinfo, buf, len, rflag);
                    ~~~~                                       
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpamb.c:6:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 29 and 4124 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpamb.c:250:72: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4056 [-Wformat-truncation=]
     snprintf(errbuf, SZ_LINE, "can't allocate memory for xpamb buffer: %s",
                                                                        ^~
xpamb.c:566:20:
     status = MBAdd(xadd, xinfo, buf, len, rflag);
                    ~~~~                                                 
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpamb.c:6:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 41 and 4136 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpamb.c:241:71: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4057 [-Wformat-truncation=]
     snprintf(errbuf, SZ_LINE, "can't allocate memory for xpamb entry: %s",
                                                                       ^~
xpamb.c:566:20:
     status = MBAdd(xadd, xinfo, buf, len, rflag);
                    ~~~~                                                
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpamb.c:6:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 40 and 4135 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpamb.c:198:66: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4062 [-Wformat-truncation=]
     snprintf(errbuf, SZ_LINE, "can't delete unknown xpamb entry: %s", name);
                                                                  ^~
xpamb.c:571:23:
     status = MBRemove(xremove);
                       ~~~~~~~                                     
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpamb.c:6:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 35 and 4130 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpamb.c: In function ‘MBSendCB’:
xpamb.c:432:55: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4075 [-Wformat-truncation=]
       snprintf(errbuf, SZ_LINE, "unknown xpamb entry: %s", tbuf);
                                                       ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpamb.c:6:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 22 and 4117 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c: In function ‘LookupReq.isra.10’:
xpans.c:1169:37: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
       snprintf(method, SZ_LINE, "%s:%s", args[0], args[1]);
                                     ^~            ~~~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 2 and 8192 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c: In function ‘send_cb’:
xpans.c:389:59: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4069 [-Wformat-truncation=]
       snprintf(ebuf, SZ_LINE, "XPA$ERROR unknown command '%s'\n", tbuf);
                                                           ^~      ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 30 and 4125 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c:378:30: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
  snprintf(tbuf, SZ_LINE, "%s %s %s", tmpl, type, users);
                              ^~            ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 3 and 12288 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c: In function ‘main’:
xpans.c:1655:36: warning: ‘-lock’ directive output may be truncated writing 5 bytes into a region of size between 1 and 4096 [-Wformat-truncation=]
     snprintf(lockfile, SZ_LINE, "%s-lock", method);
                                    ^~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 6 and 4101 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c:1876:39: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4063 [-Wformat-truncation=]
     "XPA$ERROR unknown xpans request: %s\n", lbuf);
                                       ^~     ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 35 and 4130 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c:1079:30: warning: ‘,’ directive output may be truncated writing 1 byte into a region of size between 0 and 4095 [-Wformat-truncation=]
  snprintf(tbuf, SZ_LINE, "@%s,%s", method, omethod);
                              ^
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 3 and 8193 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c:1012:30: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
  snprintf(tbuf, SZ_LINE, "%s,%s", method, omethod);
                              ^~           ~~~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 2 and 8192 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c:937:30: warning: ‘,’ directive output may be truncated writing 1 byte into a region of size between 0 and 4095 [-Wformat-truncation=]
  snprintf(tbuf, SZ_LINE, "@%s,%s", method, omethod);
                              ^
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 3 and 8193 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c:935:30: warning: ‘__builtin___snprintf_chk’ output may be truncated before the last format character [-Wformat-truncation=]
  snprintf(tbuf, SZ_LINE, "@%s", method);
                              ^
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 2 and 4097 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c:946:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size between 4072 and 4082 [-Wformat-truncation=]
     snprintf(info, SZ_LINE, "nsproxy=%d,ns=(%s,%s,%s,%s),dofork=true",
                                             ^~
      req->sock, xclass, name, method, omethod);
                 ~~~~~~                       
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 31 and 16421 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpans.c:857:35: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
       snprintf(tbuf, SZ_LINE, "%s,%s", method, omethod);
                                   ^~           ~~~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpans.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 2 and 8192 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c: In function ‘XPAClientEnd’:
client.c:681:50: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4052 [-Wformat-truncation=]
client.c:677:14:
       eptr = errbuf;
              ~~~~~~                               
client.c:681:50:
    "XPA$WARNING: protocol mismatch - missing id\n%s", eptr);
                                                  ^~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 45 and 4140 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c: In function ‘XPAProxyAccept.isra.5’:
client.c:182:38: warning: ‘__builtin___snprintf_chk’ output may be truncated before the last format character [-Wformat-truncation=]
     snprintf(amethod, SZ_LINE, "%s/%s", XPATmpdir(), tbuf);
                                      ^
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 2 or more bytes (assuming 4097) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c:220:38: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4086 [-Wformat-truncation=]
   snprintf(tbuf, SZ_LINE, "xpaaccept %s (%s:%s %s)\n",
                                      ^~
     amethod, xclass, name, method);
     ~~~~~~~                           
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 17 or more bytes (assuming 4112) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c: In function ‘XPAClientStart’:
client.c:1895:52: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4050 [-Wformat-truncation=]
     "XPA$WARNING: invalid data connection request: %s (%s:%s)\n",
                                                    ^~
     tbuf, client->xclass, client->name);
     ~~~~                                            
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 52 or more bytes (assuming 4147) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c:1882:47: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4057 [-Wformat-truncation=]
      "XPA$WARNING: missing DATA request type\n%s", lbuf);
                                               ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 40 and 4135 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c:2067:41: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4085 [-Wformat-truncation=]
     snprintf(lbuf, SZ_LINE, "xpadata -f %s %s\n", tbuf, tbuf2);
                                         ^~        ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 14 and 8204 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c:2073:51: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4055 [-Wformat-truncation=]
         "XPA$ERROR: unable to issue data request: %s (%s:%s%s)\n",
                                                   ^~
         lbuf, client->xclass, client->name, XPATimestamp());
         ~~~~                                       
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 47 or more bytes (assuming 4142) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c:1869:68: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4063 [-Wformat-truncation=]
       snprintf(errbuf, SZ_LINE, "XPA$WARNING: missing BUF request\n%s", lbuf);
                                                                    ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 34 and 4129 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
client.c:1853:46: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4061 [-Wformat-truncation=]
         "XPA$WARNING: Protocol mismatch: id\n%s", lbuf);
                                              ^~   ~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from client.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output between 36 and 4131 bytes into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ar cruv libtclxpa.a tclloop.o tcl.o 
ar: `u' modifier ignored since `D' is the default (see `U')
a - tclloop.o
a - tcl.o
arm-linux-gnueabihf-ranlib libtclxpa.a
xpa.c: In function ‘XPANSAdd.part.8’:
xpa.c:2874:45: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size between 4083 and 4088 [-Wformat-truncation=]
     snprintf(tbuf, SZ_LINE, "%s %s %s:%s %s %s\n",
                                             ^~
       cmd, xpa->method, xpa->xclass, xpa->name, xpa->type, username);
                                                            ~~~~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpa.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 10 or more bytes (assuming 4110) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpa.c: In function ‘XPANew’:
xpa.c:4148:37: warning: ‘__builtin___snprintf_chk’ output may be truncated before the last format character [-Wformat-truncation=]
       snprintf(tbuf, SZ_LINE, "%s/%s", tmpdir, tfile);
                                     ^
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpa.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 2 or more bytes (assuming 4097) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpa.c: In function ‘XPAInfoNew’:
xpa.c:4367:35: warning: ‘__builtin___snprintf_chk’ output may be truncated before the last format character [-Wformat-truncation=]
     snprintf(tbuf, SZ_LINE, "%s/%s", tmpdir, tfile);
                                   ^
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpa.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 2 or more bytes (assuming 4097) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xpa.c: In function ‘XPANSLookup’:
xpa.c:3785:39: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 4089 [-Wformat-truncation=]
       snprintf(tbuf, SZ_LINE, "lookup %s:%s %s %s\n",
                                       ^~
         xclass, name, xtype, nsusers);
         ~~~~~~                         
xpa.c:3785:31: note: assuming directive output of 1 byte
       snprintf(tbuf, SZ_LINE, "lookup %s:%s %s %s\n",
                               ^~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/arm-linux-gnueabihf/include/stdio.h:873,
                 from /usr/arm-linux-gnueabihf/include/malloc.h:24,
                 from ./xpap.h:38,
                 from xpa.c:5:
/usr/arm-linux-gnueabihf/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 12 or more bytes (assuming 12298) into a destination of size 4096
   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        __bos (__s), __fmt, __va_arg_pack ());
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
rm -f libxpa.a
ar crv libxpa.a xpa.o xpaio.o command.o acl.o remote.o clipboard.o port.o tcp.o client.o word.o xalloc.o find.o xlaunch.o timedconn.o xtloop.o gtkloop.o
a - xpa.o
a - xpaio.o
a - command.o
a - acl.o
a - remote.o
a - clipboard.o
a - port.o
a - tcp.o
a - client.o
a - word.o
a - xalloc.o
a - find.o
a - xlaunch.o
a - timedconn.o
a - xtloop.o
a - gtkloop.o
arm-linux-gnueabihf-ranlib libxpa.a
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro xpaset.o -o xpaset -L. -lxpa 
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro xpaget.o -o xpaget -L. -lxpa 
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro xpainfo.o -o xpainfo -L. -lxpa 
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro xpaaccess.o -o xpaaccess -L. -lxpa 
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro xpans.o -o xpans -L. -lxpa  
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro xpamb.o -o xpamb -L. -lxpa 
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro ctest.o -o ctest -L. -lxpa 
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro stest.o -o stest libxpa.a 
arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,relro rtest.o -o rtest libxpa.a 
mklib: Making Linux shared library:  libxpa.so.1.0
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_auto_test -a
   create-stamp debian/debhelper-build-stamp
 fakeroot debian/rules binary-arch
dh binary-arch --with autoreconf
   dh_testroot -a
   dh_prep -a
   dh_auto_install -a
	make -j16 install DESTDIR=/<<PKGBUILDDIR>>/debian/tmp AM_UPDATE_INFO_DIR=no
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Making directory /<<PKGBUILDDIR>>/debian/tmp/usr/lib/arm-linux-gnueabihf
Making directory /<<PKGBUILDDIR>>/debian/tmp/usr/include
Making directory /<<PKGBUILDDIR>>/debian/tmp/usr/bin
Installing libxpa.a
Installing xpa.h
Installing prsetup.h
Installing xpaset
Installing xpaget
Installing xpainfo
Installing xpaaccess
Installing xpans
Installing xpamb
Installing link libxpa.so
Installing link libxpa.so.1
Installing libxpa.so.1.0
Making directory /<<PKGBUILDDIR>>/debian/tmp/usr/share/man
Making directory /<<PKGBUILDDIR>>/debian/tmp/usr/share/man/man1
Installing xpaaccess.1
Installing xpachanges.1
Installing xpaget.1
Installing xpainfo.1
Installing xpamb.1
Installing xpans.1
Installing xpaset.1
Making directory /<<PKGBUILDDIR>>/debian/tmp/usr/share/man/man3
Installing xpaaccess.3
Installing xpaatexit.3
Installing xpacleanup.3
Installing xpaclient.3
Installing xpaclose.3
Installing xpacmdadd.3
Installing xpacmddel.3
Installing xpacmdnew.3
Installing xpafree.3
Installing xpaget.3
Installing xpagetfd.3
Installing xpainfo.3
Installing xpainfonew.3
Installing xpamacros.3
Installing xpamainloop.3
Installing xpanew.3
Installing xpanslookup.3
Installing xpaopen.3
Installing xpapoll.3
Installing xparace.3
Installing xpaserver.3
Installing xpaset.3
Installing xpasetfd.3
Making directory /<<PKGBUILDDIR>>/debian/tmp/usr/share/man/mann
Installing xpa.n
Installing xpaacl.n
Installing xpacode.n
Installing xpacommon.n
Installing xpaconvert.n
Installing xpaenv.n
Installing xpainet.n
Installing xpaintro.n
Installing xpamethod.n
Installing xpaname.n
Installing xpaoom.n
Installing xpatcl.n
Installing xpatemplate.n
Installing xpausers.n
Installing xpaxt.n
Making directory /<<PKGBUILDDIR>>/debian/tmp/usr/share/xpa
Installing xpa4.index
Installing xpa4.index.prop
Installing xpa4.index.version
Installing xpa8.index
Installing xpa8.index.prop
Installing xpa8.index.version
Installing xpa.pc
ar cruv libtclxpa.a tclloop.o tcl.o 
ar: `u' modifier ignored since `D' is the default (see `U')
r - tclloop.o
r - tcl.o
arm-linux-gnueabihf-ranlib libtclxpa.a
mklib: Making Linux shared library:  libtclxpa.so.1.0
mkdir -p /<<PKGBUILDDIR>>/debian/tmp/usr/lib/tcltk/arm-linux-gnueabihf/xpa
./install-sh -c -m 644 libtclxpa.so /<<PKGBUILDDIR>>/debian/tmp/usr/lib/tcltk/arm-linux-gnueabihf/xpa
./install-sh -c -m 644 pkgIndex.tcl /<<PKGBUILDDIR>>/debian/tmp/usr/lib/tcltk/arm-linux-gnueabihf/xpa
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_install -a
   dh_installdocs -a
   debian/rules override_dh_installchangelogs
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_installchangelogs doc/changelog.html
for pkg in tcl-xpa libxpa1 xpa-tools ; do \
	rm -f debian/$pkg/usr/share/doc/$pkg/changelog.html; \
done
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_installman -a
   dh_lintian -a
   dh_perl -a
   dh_link -a
   dh_strip_nondeterminism -a
   debian/rules override_dh_compress
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_compress -Xchangelog.html
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_fixperms -a
   dh_missing -a
dh_missing: usr/share/man/man3/xpainfo.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpaclient.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpafree.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpaserver.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpamacros.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpanslookup.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpapoll.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xparace.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpagetfd.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpaaccess.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpacmdadd.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpamainloop.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpacleanup.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpainfonew.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpasetfd.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpaset.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpanew.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpaopen.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpacmdnew.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpaget.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpaatexit.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpaclose.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man3/xpacmddel.3 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man1/xpachanges.1 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man1/xpaset.1 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man1/xpans.1 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man1/xpainfo.1 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man1/xpaaccess.1 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man1/xpaget.1 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/man1/xpamb.1 exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpa.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpaxt.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpaoom.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpausers.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpatcl.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpacommon.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpaconvert.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpaname.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpaacl.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpaintro.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpacode.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpamethod.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpatemplate.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpaenv.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/man/mann/xpainet.n exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/xpa/xpa4.index.version exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/xpa/xpa4.index exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/xpa/xpa4.index.prop exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/xpa/xpa8.index.version exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/xpa/xpa8.index.prop exists in debian/tmp but is not installed to anywhere
dh_missing: usr/share/xpa/xpa8.index exists in debian/tmp but is not installed to anywhere
	The following debhelper tools have reported what they installed (with files per package)
	 * dh_install: libxpa-dev (5), libxpa1 (2), tcl-xpa (2), xpa-tools (6)
	 * dh_installdocs: libxpa-dev (23), libxpa1 (0), tcl-xpa (0), xpa-tools (0)
	 * dh_installman: libxpa-dev (38), libxpa1 (0), tcl-xpa (1), xpa-tools (6)
	If the missing files are installed by another tool, please file a bug against it.
	When filing the report, if the tool is not part of debhelper itself, please reference the
	"Logging helpers and dh_missing" section from the "PROGRAMMING" guide for debhelper (10.6.3+).
	  (in the debhelper package: /usr/share/doc/debhelper/PROGRAMMING.gz)
	Be sure to test with dpkg-buildpackage -A/-B as the results may vary when only a subset is built
	For a short-term work-around: Add the files to debian/not-installed
   dh_dwz -a
   dh_strip -a
   debian/rules override_dh_makeshlibs
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_makeshlibs -Xlibtclxpa.so
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_shlibdeps -a
   dh_installdeb -a
   dh_gencontrol -a
   dh_md5sums -a
   dh_builddeb -a
dpkg-deb: building package 'libxpa1' in '../libxpa1_2.1.19-1_armhf.deb'.
dpkg-deb: building package 'libxpa-dev' in '../libxpa-dev_2.1.19-1_armhf.deb'.
dpkg-deb: building package 'libxpa1-dbgsym' in '../libxpa1-dbgsym_2.1.19-1_armhf.deb'.
dpkg-deb: building package 'tcl-xpa-dbgsym' in '../tcl-xpa-dbgsym_2.1.19-1_armhf.deb'.
dpkg-deb: building package 'xpa-tools' in '../xpa-tools_2.1.19-1_armhf.deb'.
dpkg-deb: building package 'xpa-tools-dbgsym' in '../xpa-tools-dbgsym_2.1.19-1_armhf.deb'.
dpkg-deb: building package 'tcl-xpa' in '../tcl-xpa_2.1.19-1_armhf.deb'.
 dpkg-genbuildinfo --build=any
 dpkg-genchanges --build=any >../xpa_2.1.19-1_armhf.changes
dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included)
 dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2019-07-13T13:52:29Z

Finished
--------

I: Built successfully

+------------------------------------------------------------------------------+
| Changes                                                                      |
+------------------------------------------------------------------------------+


xpa_2.1.19-1_armhf.changes:
---------------------------

Format: 1.8
Date: Fri, 12 Jul 2019 17:09:35 +0200
Source: xpa
Binary: libxpa-dev libxpa1 libxpa1-dbgsym tcl-xpa tcl-xpa-dbgsym xpa-tools xpa-tools-dbgsym
Built-For-Profiles: cross nocheck
Architecture: armhf
Version: 2.1.19-1
Distribution: unstable-amd64-sbuild
Urgency: low
Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
Changed-By: Ole Streicher <olebole@debian.org>
Description:
 libxpa-dev - Seamless communication between Unix programs (development files)
 libxpa1    - Seamless communication between Unix programs (shared library)
 tcl-xpa    - Seamless communication between Unix programs (Tcl interface)
 xpa-tools  - Tools for seamless communication between Unix programs
Changes:
 xpa (2.1.19-1) unstable; urgency=low
 .
   * New upstream version 2.1.19. Rediff patches
   * Push Standards-Version to 4.4.0. No changes required.
   * Push compat to 12
   * Tests: increase wait time to setup stest to 1 sec
   * Use dh_installman
Checksums-Sha1:
 b2c70a6a1aed5c4910d2da64cdccf8e60d5dc75b 348272 libxpa-dev_2.1.19-1_armhf.deb
 9213b9fca1cb9c1e7e95e27643a1a7dfb2396e9f 128880 libxpa1-dbgsym_2.1.19-1_armhf.deb
 6aa7a2647683e1c3c035c0f1f74b7984e62f9377 46896 libxpa1_2.1.19-1_armhf.deb
 8920a4963aef704a9e7c0bea668041b8cd9760cc 53816 tcl-xpa-dbgsym_2.1.19-1_armhf.deb
 ed429b75c5d7722280d767790176487eeb68b5a5 18676 tcl-xpa_2.1.19-1_armhf.deb
 14809dd1fcd591071125ab6f5e6bf7920bb0006d 693140 xpa-tools-dbgsym_2.1.19-1_armhf.deb
 ec7bdc6d4253eb07c8e70d3bb96a7f28f69cc00a 101692 xpa-tools_2.1.19-1_armhf.deb
 472d7a395a438db17f71785d6190bfad6a321fa3 6798 xpa_2.1.19-1_armhf.buildinfo
Checksums-Sha256:
 283bf619fb93486846adb75bfba011330c540441344c281964bb4305eb5e9132 348272 libxpa-dev_2.1.19-1_armhf.deb
 1c9967e8f4b05818a71eb8baa1f57d422494f80471657d8f8f8ef0ffe4e58794 128880 libxpa1-dbgsym_2.1.19-1_armhf.deb
 490a9d5a561c1063753fcd21fc1a53e9379eba2ceaf2a7f147a2b043adea0990 46896 libxpa1_2.1.19-1_armhf.deb
 fc4dacae0ef7d50eba071787918668b7216681cab20dea0a135f35db91ac2f1e 53816 tcl-xpa-dbgsym_2.1.19-1_armhf.deb
 31da977d7c034fe49537bfd9edf163a2b7cc0c9b11e6233395363362c1bd60b5 18676 tcl-xpa_2.1.19-1_armhf.deb
 24f2f8e3ab69ce422774741712bffafd7902b79556bcf266069fb02e0c6815fc 693140 xpa-tools-dbgsym_2.1.19-1_armhf.deb
 f0c4dd57cd00b69d53b0483c6fc3beeb4c07784b6d5b0ec1f0038835408e3bd9 101692 xpa-tools_2.1.19-1_armhf.deb
 f8ea16dfe9c7eb4512133cd75b2ea6617a71c2a61aa92164fcf2b6612060d1f0 6798 xpa_2.1.19-1_armhf.buildinfo
Files:
 146279466cbb55a7bd0bc91d70a5d0b9 348272 libdevel optional libxpa-dev_2.1.19-1_armhf.deb
 7f36f6b760c8408fa7b16888fc847c42 128880 debug optional libxpa1-dbgsym_2.1.19-1_armhf.deb
 fb9914b7b20d6c73199cefabbf3d5c7f 46896 libs optional libxpa1_2.1.19-1_armhf.deb
 5145e3f9ac3da905b65a936479c406f2 53816 debug optional tcl-xpa-dbgsym_2.1.19-1_armhf.deb
 a80cabbdca92fac8cea7cc8dede3fe89 18676 interpreters optional tcl-xpa_2.1.19-1_armhf.deb
 029fa3744f50e9b6d86458605dd6824b 693140 debug optional xpa-tools-dbgsym_2.1.19-1_armhf.deb
 9bbdf0adca284f16c86b01973bee8364 101692 science optional xpa-tools_2.1.19-1_armhf.deb
 41401fea44eb5aa870fbe5b9ef649dc9 6798 science optional xpa_2.1.19-1_armhf.buildinfo

+------------------------------------------------------------------------------+
| Buildinfo                                                                    |
+------------------------------------------------------------------------------+

Format: 1.0
Source: xpa
Binary: libxpa1 libxpa-dev xpa-tools tcl-xpa
Architecture: armhf
Version: 2.1.19-1
Checksums-Md5:
 146279466cbb55a7bd0bc91d70a5d0b9 348272 libxpa-dev_2.1.19-1_armhf.deb
 7f36f6b760c8408fa7b16888fc847c42 128880 libxpa1-dbgsym_2.1.19-1_armhf.deb
 fb9914b7b20d6c73199cefabbf3d5c7f 46896 libxpa1_2.1.19-1_armhf.deb
 5145e3f9ac3da905b65a936479c406f2 53816 tcl-xpa-dbgsym_2.1.19-1_armhf.deb
 a80cabbdca92fac8cea7cc8dede3fe89 18676 tcl-xpa_2.1.19-1_armhf.deb
 029fa3744f50e9b6d86458605dd6824b 693140 xpa-tools-dbgsym_2.1.19-1_armhf.deb
 9bbdf0adca284f16c86b01973bee8364 101692 xpa-tools_2.1.19-1_armhf.deb
Checksums-Sha1:
 b2c70a6a1aed5c4910d2da64cdccf8e60d5dc75b 348272 libxpa-dev_2.1.19-1_armhf.deb
 9213b9fca1cb9c1e7e95e27643a1a7dfb2396e9f 128880 libxpa1-dbgsym_2.1.19-1_armhf.deb
 6aa7a2647683e1c3c035c0f1f74b7984e62f9377 46896 libxpa1_2.1.19-1_armhf.deb
 8920a4963aef704a9e7c0bea668041b8cd9760cc 53816 tcl-xpa-dbgsym_2.1.19-1_armhf.deb
 ed429b75c5d7722280d767790176487eeb68b5a5 18676 tcl-xpa_2.1.19-1_armhf.deb
 14809dd1fcd591071125ab6f5e6bf7920bb0006d 693140 xpa-tools-dbgsym_2.1.19-1_armhf.deb
 ec7bdc6d4253eb07c8e70d3bb96a7f28f69cc00a 101692 xpa-tools_2.1.19-1_armhf.deb
Checksums-Sha256:
 283bf619fb93486846adb75bfba011330c540441344c281964bb4305eb5e9132 348272 libxpa-dev_2.1.19-1_armhf.deb
 1c9967e8f4b05818a71eb8baa1f57d422494f80471657d8f8f8ef0ffe4e58794 128880 libxpa1-dbgsym_2.1.19-1_armhf.deb
 490a9d5a561c1063753fcd21fc1a53e9379eba2ceaf2a7f147a2b043adea0990 46896 libxpa1_2.1.19-1_armhf.deb
 fc4dacae0ef7d50eba071787918668b7216681cab20dea0a135f35db91ac2f1e 53816 tcl-xpa-dbgsym_2.1.19-1_armhf.deb
 31da977d7c034fe49537bfd9edf163a2b7cc0c9b11e6233395363362c1bd60b5 18676 tcl-xpa_2.1.19-1_armhf.deb
 24f2f8e3ab69ce422774741712bffafd7902b79556bcf266069fb02e0c6815fc 693140 xpa-tools-dbgsym_2.1.19-1_armhf.deb
 f0c4dd57cd00b69d53b0483c6fc3beeb4c07784b6d5b0ec1f0038835408e3bd9 101692 xpa-tools_2.1.19-1_armhf.deb
Build-Origin: Debian
Build-Architecture: amd64
Build-Date: Sat, 13 Jul 2019 13:52:29 +0000
Build-Path: /<<PKGBUILDDIR>>
Installed-Build-Depends:
 autoconf (= 2.69-11),
 automake (= 1:1.16.1-4),
 autopoint (= 0.19.8.1-9),
 autotools-dev (= 20180224.1),
 base-files (= 11),
 base-passwd (= 3.5.46),
 bash (= 5.0-4),
 binutils (= 2.32.51.20190707-1),
 binutils-common (= 2.32.51.20190707-1),
 binutils-x86-64-linux-gnu (= 2.32.51.20190707-1),
 bsdmainutils (= 11.1.2+b1),
 bsdutils (= 1:2.33.1-0.1),
 build-essential (= 12.6),
 bzip2 (= 1.0.6-9.2),
 coreutils (= 8.30-3),
 cpp (= 4:8.3.0-1),
 cpp-8 (= 8.3.0-19),
 dash (= 0.5.10.2-5),
 debconf (= 1.5.72),
 debhelper (= 12.1.1),
 debianutils (= 4.8.6.2),
 dh-autoreconf (= 19),
 dh-strip-nondeterminism (= 1.2.0-2),
 diffutils (= 1:3.7-3),
 dpkg (= 1.19.7),
 dpkg-dev (= 1.19.7),
 dwz (= 0.12.20190711-1),
 fdisk (= 2.33.1-0.1),
 file (= 1:5.35-4),
 findutils (= 4.6.0+git+20190510-2),
 g++ (= 4:8.3.0-1),
 g++-8 (= 8.3.0-19),
 gcc (= 4:8.3.0-1),
 gcc-8 (= 8.3.0-19),
 gcc-8-base (= 8.3.0-19),
 gcc-9-base (= 9.1.0-8),
 gettext (= 0.19.8.1-9),
 gettext-base (= 0.19.8.1-9),
 grep (= 3.3-1),
 groff-base (= 1.22.4-3),
 gzip (= 1.9-3),
 hostname (= 3.21),
 init-system-helpers (= 1.57),
 intltool-debian (= 0.35.0+20060710.5),
 libacl1 (= 2.2.53-4),
 libarchive-zip-perl (= 1.64-1),
 libasan5 (= 9.1.0-8),
 libatomic1 (= 9.1.0-8),
 libattr1 (= 1:2.4.48-4),
 libaudit-common (= 1:2.8.5-1),
 libaudit1 (= 1:2.8.5-1),
 libbinutils (= 2.32.51.20190707-1),
 libblkid1 (= 2.33.1-0.1),
 libbsd0 (= 0.9.1-2),
 libbz2-1.0 (= 1.0.6-9.2),
 libc-bin (= 2.28-10),
 libc-dev-bin (= 2.28-10),
 libc6 (= 2.28-10),
 libc6-dev (= 2.28-10),
 libcap-ng0 (= 0.7.9-2),
 libcc1-0 (= 9.1.0-8),
 libcroco3 (= 0.6.12-3),
 libdb5.3 (= 5.3.28+dfsg1-0.6),
 libdebconfclient0 (= 0.249),
 libdpkg-perl (= 1.19.7),
 libelf1 (= 0.176-1.1),
 libfdisk1 (= 2.33.1-0.1),
 libffi6 (= 3.2.1-9),
 libfile-stripnondeterminism-perl (= 1.2.0-2),
 libgcc-8-dev (= 8.3.0-19),
 libgcc1 (= 1:9.1.0-8),
 libgcrypt20 (= 1.8.4-5),
 libgdbm-compat4 (= 1.18.1-4),
 libgdbm6 (= 1.18.1-4),
 libglib2.0-0 (= 2.58.3-3),
 libgmp10 (= 2:6.1.2+dfsg-4),
 libgomp1 (= 9.1.0-8),
 libgpg-error0 (= 1.36-2),
 libice-dev (= 2:1.0.9-2),
 libice6 (= 2:1.0.9-2),
 libicu63 (= 63.2-2),
 libisl19 (= 0.20-2),
 libitm1 (= 9.1.0-8),
 liblsan0 (= 9.1.0-8),
 liblz4-1 (= 1.8.3-1),
 liblzma5 (= 5.2.4-1),
 libmagic-mgc (= 1:5.35-4),
 libmagic1 (= 1:5.35-4),
 libmonkey-patch-perl (= 0.03-2),
 libmount1 (= 2.33.1-0.1),
 libmpc3 (= 1.1.0-1),
 libmpfr6 (= 4.0.2-1),
 libmpx2 (= 8.3.0-19),
 libncurses6 (= 6.1+20181013-2),
 libncursesw6 (= 6.1+20181013-2),
 libpam-modules (= 1.3.1-5),
 libpam-modules-bin (= 1.3.1-5),
 libpam-runtime (= 1.3.1-5),
 libpam0g (= 1.3.1-5),
 libpcre2-8-0 (= 10.32-5),
 libpcre3 (= 2:8.39-12),
 libperl5.28 (= 5.28.1-6),
 libpipeline1 (= 1.5.1-2),
 libpthread-stubs0-dev (= 0.4-1),
 libquadmath0 (= 9.1.0-8),
 libseccomp2 (= 2.3.3-4),
 libselinux1 (= 2.9-2),
 libsigsegv2 (= 2.12-2),
 libsm-dev (= 2:1.2.3-1),
 libsm6 (= 2:1.2.3-1),
 libsmartcols1 (= 2.33.1-0.1),
 libstdc++-8-dev (= 8.3.0-19),
 libstdc++6 (= 9.1.0-8),
 libsub-delete-perl (= 1.00002-2),
 libsub-identify-perl (= 0.14-1+b1),
 libsuper-perl (= 1.20141117-1),
 libsystemd0 (= 241-6),
 libtcl8.6 (= 8.6.9+dfsg-2),
 libtinfo6 (= 6.1+20181013-2),
 libtool (= 2.4.6-10),
 libtsan0 (= 9.1.0-8),
 libubsan1 (= 9.1.0-8),
 libuchardet0 (= 0.0.6-3),
 libudev1 (= 241-6),
 libunistring2 (= 0.9.10-2),
 libuuid1 (= 2.33.1-0.1),
 libx11-6 (= 2:1.6.7-1),
 libx11-data (= 2:1.6.7-1),
 libx11-dev (= 2:1.6.7-1),
 libxau-dev (= 1:1.0.8-1+b2),
 libxau6 (= 1:1.0.8-1+b2),
 libxcb1 (= 1.13.1-2),
 libxcb1-dev (= 1.13.1-2),
 libxdmcp-dev (= 1:1.1.2-3),
 libxdmcp6 (= 1:1.1.2-3),
 libxml2 (= 2.9.4+dfsg1-7+b3),
 libxt-dev (= 1:1.1.5-1+b3),
 libxt6 (= 1:1.1.5-1+b3),
 linux-libc-dev (= 4.19.37-5),
 login (= 1:4.7-1),
 lsb-base (= 10.2019051400),
 m4 (= 1.4.18-2),
 make (= 4.2.1-1.2),
 man-db (= 2.8.5-2),
 mawk (= 1.3.3-17+b3),
 ncurses-base (= 6.1+20181013-2),
 ncurses-bin (= 6.1+20181013-2),
 patch (= 2.7.6-4),
 perl (= 5.28.1-6),
 perl-base (= 5.28.1-6),
 perl-modules-5.28 (= 5.28.1-6),
 po-debconf (= 1.0.21),
 sed (= 4.7-1),
 sensible-utils (= 0.0.12),
 sysvinit-utils (= 2.93-8),
 tar (= 1.30+dfsg-6),
 tcl (= 8.6.9+1),
 tcl-dev (= 8.6.9+1),
 tcl8.6 (= 8.6.9+dfsg-2),
 tcl8.6-dev (= 8.6.9+dfsg-2),
 tzdata (= 2019b-1),
 util-linux (= 2.33.1-0.1),
 x11-common (= 1:7.7+19),
 x11proto-core-dev (= 2018.4-4),
 x11proto-dev (= 2018.4-4),
 xorg-sgml-doctools (= 1:1.11-1),
 xtrans-dev (= 1.3.5-1),
 xz-utils (= 5.2.4-1),
 zlib1g (= 1:1.2.11.dfsg-1),
 zlib1g-dev (= 1:1.2.11.dfsg-1)
Environment:
 DEB_BUILD_OPTIONS="nocheck parallel=16"
 DEB_BUILD_PROFILES="cross nocheck"
 LANG="en_US.UTF-8"
 LC_ALL="C.UTF-8"
 LD_LIBRARY_PATH="/usr/lib/libeatmydata"
 MAKEFLAGS=" -j16"
 SOURCE_DATE_EPOCH="1562944175"


+------------------------------------------------------------------------------+
| Package contents                                                             |
+------------------------------------------------------------------------------+


libxpa-dev_2.1.19-1_armhf.deb
-----------------------------

 new Debian package, version 2.0.
 size 348272 bytes: control archive=2644 bytes.
    1076 bytes,    23 lines      control              
    4768 bytes,    70 lines      md5sums              
 Package: libxpa-dev
 Source: xpa
 Version: 2.1.19-1
 Architecture: armhf
 Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
 Installed-Size: 625
 Depends: libxpa1 (= 2.1.19-1)
 Section: libdevel
 Priority: optional
 Multi-Arch: same
 Homepage: https://hea-www.harvard.edu/RD/xpa/
 Description: Seamless communication between Unix programs (development files)
  The XPA messaging system provides seamless communication between many kinds
  of Unix programs, including X programs and Tcl/Tk programs. It also provides
  an easy way for users to communicate with these XPA-enabled programs by
  executing XPA client commands in the shell or by utilizing such commands in
  scripts. Because XPA works both at the programming level and the shell level,
  it is a powerful tool for unifying any analysis environment: users and
  programmers have great flexibility in choosing the best level or levels at
  which to access XPA services, and client access can be extended or modified
  easily at any time.
  .
  This package contains the header files and the static library.

drwxr-xr-x root/root         0 2019-07-12 15:09 ./
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/include/
-rw-r--r-- root/root       914 2019-07-12 15:09 ./usr/include/prsetup.h
-rw-r--r-- root/root     14703 2019-07-12 15:09 ./usr/include/xpa.h
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/arm-linux-gnueabihf/
-rw-r--r-- root/root    129684 2019-07-12 15:09 ./usr/lib/arm-linux-gnueabihf/libxpa.a
lrwxrwxrwx root/root         0 2019-07-12 15:09 ./usr/lib/arm-linux-gnueabihf/libxpa.so -> libxpa.so.1
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/arm-linux-gnueabihf/pkgconfig/
-rw-r--r-- root/root       248 2019-07-12 15:09 ./usr/lib/arm-linux-gnueabihf/pkgconfig/xpa.pc
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc-base/
-rw-r--r-- root/root       875 2017-02-03 16:14 ./usr/share/doc-base/xpa
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/libxpa-dev/
-rw-r--r-- root/root      4816 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/acl.html
-rw-r--r-- root/root      1360 2019-07-12 15:09 ./usr/share/doc/libxpa-dev/changelog.Debian.gz
-rw-r--r-- root/root        42 2019-07-12 15:09 ./usr/share/doc/libxpa-dev/changelog.gz
-rw-r--r-- root/root     24308 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/changelog.html
-rw-r--r-- root/root      1875 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/changes.html
-rw-r--r-- root/root     29962 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/client.html
-rw-r--r-- root/root      4025 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/convert.html
-rw-r--r-- root/root      2171 2018-01-11 16:11 ./usr/share/doc/libxpa-dev/copyright
-rw-r--r-- root/root     16550 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/env.html
-rw-r--r-- root/root      2113 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/examples.html
-rw-r--r-- root/root      6530 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/help.html
-rw-r--r-- root/root     10053 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/inet.html
-rw-r--r-- root/root      7090 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/info.html
-rw-r--r-- root/root      5725 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/intro.html
-rw-r--r-- root/root      3888 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/method.html
-rw-r--r-- root/root      1637 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/name.html
-rw-r--r-- root/root      1352 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/oom.html
-rw-r--r-- root/root      9282 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/programs.html
-rw-r--r-- root/root     29089 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/server.html
-rw-r--r-- root/root      8243 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/tcl.html
-rw-r--r-- root/root      3638 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/template.html
-rw-r--r-- root/root      1963 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/users.html
-rw-r--r-- root/root    132591 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/xpa.pdf.gz
-rw-r--r-- root/root      7004 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/xpamb.html
-rw-r--r-- root/root      8878 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/xpans.html
-rw-r--r-- root/root      1606 2019-03-21 16:37 ./usr/share/doc/libxpa-dev/xt.html
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/lintian/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/lintian/overrides/
-rw-r--r-- root/root       313 2017-02-03 16:14 ./usr/share/lintian/overrides/libxpa-dev
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/man/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/man/man3/
-rw-r--r-- root/root      3262 2019-07-12 15:09 ./usr/share/man/man3/xpaaccess.3.gz
-rw-r--r-- root/root      2059 2019-07-12 15:09 ./usr/share/man/man3/xpaatexit.3.gz
-rw-r--r-- root/root      2042 2019-07-12 15:09 ./usr/share/man/man3/xpacleanup.3.gz
-rw-r--r-- root/root      2462 2019-07-12 15:09 ./usr/share/man/man3/xpaclient.3.gz
-rw-r--r-- root/root      1958 2019-07-12 15:09 ./usr/share/man/man3/xpaclose.3.gz
-rw-r--r-- root/root      2294 2019-07-12 15:09 ./usr/share/man/man3/xpacmdadd.3.gz
-rw-r--r-- root/root      1913 2019-07-12 15:09 ./usr/share/man/man3/xpacmddel.3.gz
-rw-r--r-- root/root      2484 2019-07-12 15:09 ./usr/share/man/man3/xpacmdnew.3.gz
-rw-r--r-- root/root      2050 2019-07-12 15:09 ./usr/share/man/man3/xpafree.3.gz
-rw-r--r-- root/root      3275 2019-07-12 15:09 ./usr/share/man/man3/xpaget.3.gz
-rw-r--r-- root/root      3230 2019-07-12 15:09 ./usr/share/man/man3/xpagetfd.3.gz
-rw-r--r-- root/root      2995 2019-07-12 15:09 ./usr/share/man/man3/xpainfo.3.gz
-rw-r--r-- root/root      2739 2019-07-12 15:09 ./usr/share/man/man3/xpainfonew.3.gz
-rw-r--r-- root/root      2458 2019-07-12 15:09 ./usr/share/man/man3/xpamacros.3.gz
-rw-r--r-- root/root      2885 2019-07-12 15:09 ./usr/share/man/man3/xpamainloop.3.gz
-rw-r--r-- root/root      4329 2019-07-12 15:09 ./usr/share/man/man3/xpanew.3.gz
-rw-r--r-- root/root      3003 2019-07-12 15:09 ./usr/share/man/man3/xpanslookup.3.gz
-rw-r--r-- root/root      2379 2019-07-12 15:09 ./usr/share/man/man3/xpaopen.3.gz
-rw-r--r-- root/root      2248 2019-07-12 15:09 ./usr/share/man/man3/xpapoll.3.gz
-rw-r--r-- root/root      3167 2019-07-12 15:09 ./usr/share/man/man3/xparace.3.gz
-rw-r--r-- root/root      2608 2019-07-12 15:09 ./usr/share/man/man3/xpaserver.3.gz
-rw-r--r-- root/root      3205 2019-07-12 15:09 ./usr/share/man/man3/xpaset.3.gz
-rw-r--r-- root/root      3007 2019-07-12 15:09 ./usr/share/man/man3/xpasetfd.3.gz
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/man/man7/
-rw-r--r-- root/root      3449 2019-07-12 15:09 ./usr/share/man/man7/xpa.7.gz
-rw-r--r-- root/root      3467 2019-07-12 15:09 ./usr/share/man/man7/xpaacl.7.gz
-rw-r--r-- root/root      2394 2019-07-12 15:09 ./usr/share/man/man7/xpachanges.7.gz
-rw-r--r-- root/root      2442 2019-07-12 15:09 ./usr/share/man/man7/xpacode.7.gz
-rw-r--r-- root/root      3950 2019-07-12 15:09 ./usr/share/man/man7/xpacommon.7.gz
-rw-r--r-- root/root      3032 2019-07-12 15:09 ./usr/share/man/man7/xpaconvert.7.gz
-rw-r--r-- root/root      7301 2019-07-12 15:09 ./usr/share/man/man7/xpaenv.7.gz
-rw-r--r-- root/root      5121 2019-07-12 15:09 ./usr/share/man/man7/xpainet.7.gz
-rw-r--r-- root/root      3659 2019-07-12 15:09 ./usr/share/man/man7/xpaintro.7.gz
-rw-r--r-- root/root      3236 2019-07-12 15:09 ./usr/share/man/man7/xpamethod.7.gz
-rw-r--r-- root/root      2408 2019-07-12 15:09 ./usr/share/man/man7/xpaname.7.gz
-rw-r--r-- root/root      2245 2019-07-12 15:09 ./usr/share/man/man7/xpaoom.7.gz
-rw-r--r-- root/root      3005 2019-07-12 15:09 ./usr/share/man/man7/xpatemplate.7.gz
-rw-r--r-- root/root      2405 2019-07-12 15:09 ./usr/share/man/man7/xpausers.7.gz
-rw-r--r-- root/root      2295 2019-07-12 15:09 ./usr/share/man/man7/xpaxt.7.gz


libxpa1-dbgsym_2.1.19-1_armhf.deb
---------------------------------

 new Debian package, version 2.0.
 size 128880 bytes: control archive=548 bytes.
     381 bytes,    13 lines      control              
     106 bytes,     1 lines      md5sums              
 Package: libxpa1-dbgsym
 Source: xpa
 Version: 2.1.19-1
 Auto-Built-Package: debug-symbols
 Architecture: armhf
 Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
 Installed-Size: 148
 Depends: libxpa1 (= 2.1.19-1)
 Section: debug
 Priority: optional
 Multi-Arch: same
 Description: debug symbols for libxpa1
 Build-Ids: 9631b733982db8334b3b61ed869624ff770f93b4

drwxr-xr-x root/root         0 2019-07-12 15:09 ./
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/96/
-rw-r--r-- root/root    141188 2019-07-12 15:09 ./usr/lib/debug/.build-id/96/31b733982db8334b3b61ed869624ff770f93b4.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/
lrwxrwxrwx root/root         0 2019-07-12 15:09 ./usr/share/doc/libxpa1-dbgsym -> libxpa1


libxpa1_2.1.19-1_armhf.deb
--------------------------

 new Debian package, version 2.0.
 size 46896 bytes: control archive=1896 bytes.
    1039 bytes,    23 lines      control              
     287 bytes,     4 lines      md5sums              
      29 bytes,     1 lines      shlibs               
    3394 bytes,   139 lines      symbols              
      67 bytes,     2 lines      triggers             
 Package: libxpa1
 Source: xpa
 Version: 2.1.19-1
 Architecture: armhf
 Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
 Installed-Size: 95
 Depends: libc6 (>= 2.28)
 Section: libs
 Priority: optional
 Multi-Arch: same
 Homepage: https://hea-www.harvard.edu/RD/xpa/
 Description: Seamless communication between Unix programs (shared library)
  The XPA messaging system provides seamless communication between many kinds
  of Unix programs, including X programs and Tcl/Tk programs. It also provides
  an easy way for users to communicate with these XPA-enabled programs by
  executing XPA client commands in the shell or by utilizing such commands in
  scripts. Because XPA works both at the programming level and the shell level,
  it is a powerful tool for unifying any analysis environment: users and
  programmers have great flexibility in choosing the best level or levels at
  which to access XPA services, and client access can be extended or modified
  easily at any time.
  .
  This package contains the shared library.

drwxr-xr-x root/root         0 2019-07-12 15:09 ./
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/arm-linux-gnueabihf/
lrwxrwxrwx root/root         0 2019-07-12 15:09 ./usr/lib/arm-linux-gnueabihf/libxpa.so.1 -> libxpa.so.1.0
-rw-r--r-- root/root     75624 2019-07-12 15:09 ./usr/lib/arm-linux-gnueabihf/libxpa.so.1.0
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/libxpa1/
-rw-r--r-- root/root      1360 2019-07-12 15:09 ./usr/share/doc/libxpa1/changelog.Debian.gz
-rw-r--r-- root/root        42 2019-07-12 15:09 ./usr/share/doc/libxpa1/changelog.gz
-rw-r--r-- root/root      2171 2018-01-11 16:11 ./usr/share/doc/libxpa1/copyright


tcl-xpa-dbgsym_2.1.19-1_armhf.deb
---------------------------------

 new Debian package, version 2.0.
 size 53816 bytes: control archive=548 bytes.
     380 bytes,    13 lines      control              
     106 bytes,     1 lines      md5sums              
 Package: tcl-xpa-dbgsym
 Source: xpa
 Version: 2.1.19-1
 Auto-Built-Package: debug-symbols
 Architecture: armhf
 Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
 Installed-Size: 67
 Depends: tcl-xpa (= 2.1.19-1)
 Section: debug
 Priority: optional
 Multi-Arch: same
 Description: debug symbols for tcl-xpa
 Build-Ids: dd538944aa5c8d5547168d496b13c70ee4b262f4

drwxr-xr-x root/root         0 2019-07-12 15:09 ./
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/dd/
-rw-r--r-- root/root     57948 2019-07-12 15:09 ./usr/lib/debug/.build-id/dd/538944aa5c8d5547168d496b13c70ee4b262f4.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/
lrwxrwxrwx root/root         0 2019-07-12 15:09 ./usr/share/doc/tcl-xpa-dbgsym -> tcl-xpa


tcl-xpa_2.1.19-1_armhf.deb
--------------------------

 new Debian package, version 2.0.
 size 18676 bytes: control archive=1120 bytes.
    1066 bytes,    23 lines      control              
     449 bytes,     6 lines      md5sums              
 Package: tcl-xpa
 Source: xpa
 Version: 2.1.19-1
 Architecture: armhf
 Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
 Installed-Size: 46
 Depends: libxpa1 (= 2.1.19-1), libc6 (>= 2.7)
 Section: interpreters
 Priority: optional
 Multi-Arch: same
 Homepage: https://hea-www.harvard.edu/RD/xpa/
 Description: Seamless communication between Unix programs (Tcl interface)
  The XPA messaging system provides seamless communication between many kinds
  of Unix programs, including X programs and Tcl/Tk programs. It also provides
  an easy way for users to communicate with these XPA-enabled programs by
  executing XPA client commands in the shell or by utilizing such commands in
  scripts. Because XPA works both at the programming level and the shell level,
  it is a powerful tool for unifying any analysis environment: users and
  programmers have great flexibility in choosing the best level or levels at
  which to access XPA services, and client access can be extended or modified
  easily at any time.
  .
  This package contains the Tcl interface.

drwxr-xr-x root/root         0 2019-07-12 15:09 ./
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/tcltk/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/tcltk/arm-linux-gnueabihf/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/tcltk/arm-linux-gnueabihf/xpa/
-rw-r--r-- root/root     22004 2019-07-12 15:09 ./usr/lib/tcltk/arm-linux-gnueabihf/xpa/libtclxpa.so
-rw-r--r-- root/root       544 2019-07-12 15:09 ./usr/lib/tcltk/arm-linux-gnueabihf/xpa/pkgIndex.tcl
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/tcl-xpa/
-rw-r--r-- root/root      1360 2019-07-12 15:09 ./usr/share/doc/tcl-xpa/changelog.Debian.gz
-rw-r--r-- root/root        42 2019-07-12 15:09 ./usr/share/doc/tcl-xpa/changelog.gz
-rw-r--r-- root/root      2171 2018-01-11 16:11 ./usr/share/doc/tcl-xpa/copyright
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/man/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/man/man3/
-rw-r--r-- root/root      4658 2019-07-12 15:09 ./usr/share/man/man3/xpatcl.3tcl.gz


xpa-tools-dbgsym_2.1.19-1_armhf.deb
-----------------------------------

 new Debian package, version 2.0.
 size 693140 bytes: control archive=856 bytes.
     575 bytes,    12 lines      control              
     725 bytes,     7 lines      md5sums              
 Package: xpa-tools-dbgsym
 Source: xpa
 Version: 2.1.19-1
 Auto-Built-Package: debug-symbols
 Architecture: armhf
 Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
 Installed-Size: 836
 Depends: xpa-tools (= 2.1.19-1)
 Section: debug
 Priority: optional
 Description: debug symbols for xpa-tools
 Build-Ids: 0e4d4a209d1c4cba3d37c22047219d0ea7a7c736 2073d16d6d3dce9f89f0426e1e39cd9b58cb70f9 4a19344bc0dd48a5b3e232a490b0dbc089c56ae5 955b8cebd4397939110c6ecade20c16730aa9908 a6827160b00d5629dbc7f9357ea72fb832bc5f7f c4c6f60db1f7568d84e665b835f214c817065cc2

drwxr-xr-x root/root         0 2019-07-12 15:09 ./
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/0e/
-rw-r--r-- root/root    136480 2019-07-12 15:09 ./usr/lib/debug/.build-id/0e/4d4a209d1c4cba3d37c22047219d0ea7a7c736.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/20/
-rw-r--r-- root/root    133364 2019-07-12 15:09 ./usr/lib/debug/.build-id/20/73d16d6d3dce9f89f0426e1e39cd9b58cb70f9.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/4a/
-rw-r--r-- root/root    133568 2019-07-12 15:09 ./usr/lib/debug/.build-id/4a/19344bc0dd48a5b3e232a490b0dbc089c56ae5.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/95/
-rw-r--r-- root/root    151152 2019-07-12 15:09 ./usr/lib/debug/.build-id/95/5b8cebd4397939110c6ecade20c16730aa9908.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/a6/
-rw-r--r-- root/root    133184 2019-07-12 15:09 ./usr/lib/debug/.build-id/a6/827160b00d5629dbc7f9357ea72fb832bc5f7f.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.build-id/c4/
-rw-r--r-- root/root    133128 2019-07-12 15:09 ./usr/lib/debug/.build-id/c4/c6f60db1f7568d84e665b835f214c817065cc2.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.dwz/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/lib/debug/.dwz/arm-linux-gnueabihf/
-rw-r--r-- root/root     13120 2019-07-12 15:09 ./usr/lib/debug/.dwz/arm-linux-gnueabihf/xpa-tools.debug
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/
lrwxrwxrwx root/root         0 2019-07-12 15:09 ./usr/share/doc/xpa-tools-dbgsym -> xpa-tools


xpa-tools_2.1.19-1_armhf.deb
----------------------------

 new Debian package, version 2.0.
 size 101692 bytes: control archive=1288 bytes.
    1045 bytes,    22 lines      control              
     905 bytes,    15 lines      md5sums              
 Package: xpa-tools
 Source: xpa
 Version: 2.1.19-1
 Architecture: armhf
 Maintainer: Debian Astro Team <debian-astro-maintainers@lists.alioth.debian.org>
 Installed-Size: 495
 Depends: libxpa1 (= 2.1.19-1), libc6 (>= 2.28)
 Section: science
 Priority: optional
 Homepage: https://hea-www.harvard.edu/RD/xpa/
 Description: Tools for seamless communication between Unix programs
  The XPA messaging system provides seamless communication between many kinds
  of Unix programs, including X programs and Tcl/Tk programs. It also provides
  an easy way for users to communicate with these XPA-enabled programs by
  executing XPA client commands in the shell or by utilizing such commands in
  scripts. Because XPA works both at the programming level and the shell level,
  it is a powerful tool for unifying any analysis environment: users and
  programmers have great flexibility in choosing the best level or levels at
  which to access XPA services, and client access can be extended or modified
  easily at any time.
  .
  This package contains the additional tools.

drwxr-xr-x root/root         0 2019-07-12 15:09 ./
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/bin/
-rwxr-xr-x root/root     75956 2019-07-12 15:09 ./usr/bin/xpaaccess
-rwxr-xr-x root/root     75960 2019-07-12 15:09 ./usr/bin/xpaget
-rwxr-xr-x root/root     75956 2019-07-12 15:09 ./usr/bin/xpainfo
-rwxr-xr-x root/root     75944 2019-07-12 15:09 ./usr/bin/xpamb
-rwxr-xr-x root/root     84156 2019-07-12 15:09 ./usr/bin/xpans
-rwxr-xr-x root/root     75960 2019-07-12 15:09 ./usr/bin/xpaset
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/doc/xpa-tools/
-rw-r--r-- root/root      1360 2019-07-12 15:09 ./usr/share/doc/xpa-tools/changelog.Debian.gz
-rw-r--r-- root/root        42 2019-07-12 15:09 ./usr/share/doc/xpa-tools/changelog.gz
-rw-r--r-- root/root      2171 2018-01-11 16:11 ./usr/share/doc/xpa-tools/copyright
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/man/
drwxr-xr-x root/root         0 2019-07-12 15:09 ./usr/share/man/man1/
-rw-r--r-- root/root      3065 2019-07-12 15:09 ./usr/share/man/man1/xpaaccess.1.gz
-rw-r--r-- root/root      2228 2019-07-12 15:09 ./usr/share/man/man1/xpaget.1.gz
-rw-r--r-- root/root      2217 2019-07-12 15:09 ./usr/share/man/man1/xpainfo.1.gz
-rw-r--r-- root/root      4260 2019-07-12 15:09 ./usr/share/man/man1/xpamb.1.gz
-rw-r--r-- root/root      5078 2019-07-12 15:09 ./usr/share/man/man1/xpans.1.gz
-rw-r--r-- root/root      2954 2019-07-12 15:09 ./usr/share/man/man1/xpaset.1.gz


lintian
-------


Setup apt archive
-----------------

Merged Build-Depends: lintian:amd64
Filtered Build-Depends: lintian:amd64
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [963 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [535 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [620 B]
Fetched 2118 B in 0s (161 kB/s)
Reading package lists...
Reading package lists...

Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  diffstat libapt-pkg-perl libb-hooks-op-check-perl libcapture-tiny-perl
  libcgi-pm-perl libclass-accessor-perl libclass-method-modifiers-perl
  libclone-perl libdevel-callchecker-perl libdevel-globaldestruction-perl
  libdigest-hmac-perl libdynaloader-functions-perl libemail-valid-perl
  libexporter-tiny-perl libfile-basedir-perl libfuture-perl
  libhtml-parser-perl libhtml-tagset-perl libimport-into-perl libio-async-perl
  libio-pty-perl libio-socket-ssl-perl libipc-run-perl
  libipc-system-simple-perl liblist-compare-perl liblist-moreutils-perl
  libmailtools-perl libmodule-runtime-perl libmoo-perl libnet-dns-perl
  libnet-domain-tld-perl libnet-ip-perl libnet-smtp-ssl-perl
  libnet-ssleay-perl libparams-classify-perl libparse-debianchangelog-perl
  libpath-tiny-perl librole-tiny-perl libssl1.1 libstrictures-perl
  libstruct-dumb-perl libsub-exporter-progressive-perl libsub-name-perl
  libsub-quote-perl libtext-levenshtein-perl libtimedate-perl libtry-tiny-perl
  libtype-tiny-perl liburi-perl libyaml-0-2 libyaml-libyaml-perl lintian
  netbase patchutils perl-openssl-defaults t1utils
Suggested packages:
  libdata-dump-perl ca-certificates libscalar-number-perl
  libhtml-template-perl libbareword-filehandles-perl libindirect-perl
  libmultidimensional-perl libdevel-lexalias-perl libdevel-stacktrace-perl
  libwww-perl binutils-multiarch libtext-template-perl
Recommended packages:
  libcgi-fast-perl libhttp-message-perl libasync-mergepoint-perl
  libsereal-perl libtest-fatal-perl libtest-refcount-perl
  libclass-xsaccessor-perl libdigest-bubblebabble-perl libnet-dns-sec-perl
  libnet-libidn-perl libauthen-sasl-perl libunicode-utf8-perl libref-util-perl
  libtype-tiny-xs-perl libperlio-gzip-perl
The following NEW packages will be installed:
  diffstat libapt-pkg-perl libb-hooks-op-check-perl libcapture-tiny-perl
  libcgi-pm-perl libclass-accessor-perl libclass-method-modifiers-perl
  libclone-perl libdevel-callchecker-perl libdevel-globaldestruction-perl
  libdigest-hmac-perl libdynaloader-functions-perl libemail-valid-perl
  libexporter-tiny-perl libfile-basedir-perl libfuture-perl
  libhtml-parser-perl libhtml-tagset-perl libimport-into-perl libio-async-perl
  libio-pty-perl libio-socket-ssl-perl libipc-run-perl
  libipc-system-simple-perl liblist-compare-perl liblist-moreutils-perl
  libmailtools-perl libmodule-runtime-perl libmoo-perl libnet-dns-perl
  libnet-domain-tld-perl libnet-ip-perl libnet-smtp-ssl-perl
  libnet-ssleay-perl libparams-classify-perl libparse-debianchangelog-perl
  libpath-tiny-perl librole-tiny-perl libssl1.1 libstrictures-perl
  libstruct-dumb-perl libsub-exporter-progressive-perl libsub-name-perl
  libsub-quote-perl libtext-levenshtein-perl libtimedate-perl libtry-tiny-perl
  libtype-tiny-perl liburi-perl libyaml-0-2 libyaml-libyaml-perl lintian
  netbase patchutils perl-openssl-defaults
  sbuild-build-depends-lintian-dummy:armhf t1utils
0 upgraded, 57 newly installed, 0 to remove and 0 not upgraded.
Need to get 3903 kB/6068 kB of archives.
After this operation, 18.2 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [844 B]
Get:2 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libapt-pkg-perl amd64 0.1.36+b1 [71.2 kB]
Get:3 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libb-hooks-op-check-perl amd64 0.22-1+b1 [11.4 kB]
Get:4 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB]
Get:5 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libcgi-pm-perl all 4.40-1 [222 kB]
Get:6 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB]
Get:7 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB]
Get:8 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libclass-method-modifiers-perl all 2.12-1 [18.6 kB]
Get:9 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB]
Get:10 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libdynaloader-functions-perl all 0.003-1 [12.6 kB]
Get:11 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libdevel-callchecker-perl amd64 0.008-1 [15.7 kB]
Get:12 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libsub-exporter-progressive-perl all 0.001013-1 [7588 B]
Get:13 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libdevel-globaldestruction-perl all 0.14-1 [8084 B]
Get:14 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB]
Get:15 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libnet-ssleay-perl amd64 1.85-3 [306 kB]
Get:16 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libnet-smtp-ssl-perl all 1.04-1 [6184 B]
Get:17 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libmailtools-perl all 2.18-1 [88.5 kB]
Get:18 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB]
Get:19 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libnet-dns-perl all 1.19-1 [372 kB]
Get:20 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB]
Get:21 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB]
Get:22 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB]
Get:23 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB]
Get:24 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB]
Get:25 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libfuture-perl all 0.39-1 [74.5 kB]
Get:26 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libparams-classify-perl amd64 0.015-1+b1 [25.5 kB]
Get:27 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libmodule-runtime-perl all 0.016-1 [19.4 kB]
Get:28 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libimport-into-perl all 1.002005-1 [11.6 kB]
Get:29 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB]
Get:30 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libio-async-perl all 0.72-1 [262 kB]
Get:31 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB]
Get:32 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libipc-run-perl all 20180523.0-1 [101 kB]
Get:33 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 liblist-compare-perl all 0.53-1 [68.9 kB]
Get:34 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB]
Get:35 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 librole-tiny-perl all 2.000006-1 [19.4 kB]
Get:36 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libstrictures-perl all 2.000005-1 [18.3 kB]
Get:37 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libsub-quote-perl all 2.005001-1 [17.9 kB]
Get:38 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libmoo-perl all 2.003004-2 [57.4 kB]
Get:39 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB]
Get:40 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB]
Get:41 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB]
Get:42 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libtype-tiny-perl all 1.004004-1 [266 kB]
Get:43 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libyaml-0-2 amd64 0.2.1-1 [47.2 kB]
Get:44 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 libyaml-libyaml-perl amd64 0.76+repack-1 [33.1 kB]
Get:45 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 t1utils amd64 1.41-3 [62.3 kB]
Get:46 http://cdn-fastly.deb.debian.org/debian unstable/main amd64 lintian all 2.16.0 [1189 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 3903 kB in 12s (328 kB/s)
Selecting previously unselected package netbase.
(Reading database ... 19580 files and directories currently installed.)
Preparing to unpack .../00-netbase_5.6_all.deb ...
Unpacking netbase (5.6) ...
Selecting previously unselected package diffstat.
Preparing to unpack .../01-diffstat_1.62-1_amd64.deb ...
Unpacking diffstat (1.62-1) ...
Selecting previously unselected package libapt-pkg-perl.
Preparing to unpack .../02-libapt-pkg-perl_0.1.36+b1_amd64.deb ...
Unpacking libapt-pkg-perl (0.1.36+b1) ...
Selecting previously unselected package libb-hooks-op-check-perl.
Preparing to unpack .../03-libb-hooks-op-check-perl_0.22-1+b1_amd64.deb ...
Unpacking libb-hooks-op-check-perl (0.22-1+b1) ...
Selecting previously unselected package libcapture-tiny-perl.
Preparing to unpack .../04-libcapture-tiny-perl_0.48-1_all.deb ...
Unpacking libcapture-tiny-perl (0.48-1) ...
Selecting previously unselected package libhtml-tagset-perl.
Preparing to unpack .../05-libhtml-tagset-perl_3.20-3_all.deb ...
Unpacking libhtml-tagset-perl (3.20-3) ...
Selecting previously unselected package liburi-perl.
Preparing to unpack .../06-liburi-perl_1.76-1_all.deb ...
Unpacking liburi-perl (1.76-1) ...
Selecting previously unselected package libhtml-parser-perl.
Preparing to unpack .../07-libhtml-parser-perl_3.72-3+b3_amd64.deb ...
Unpacking libhtml-parser-perl (3.72-3+b3) ...
Selecting previously unselected package libcgi-pm-perl.
Preparing to unpack .../08-libcgi-pm-perl_4.40-1_all.deb ...
Unpacking libcgi-pm-perl (4.40-1) ...
Selecting previously unselected package libsub-name-perl.
Preparing to unpack .../09-libsub-name-perl_0.21-1+b3_amd64.deb ...
Unpacking libsub-name-perl (0.21-1+b3) ...
Selecting previously unselected package libclass-accessor-perl.
Preparing to unpack .../10-libclass-accessor-perl_0.51-1_all.deb ...
Unpacking libclass-accessor-perl (0.51-1) ...
Selecting previously unselected package libclass-method-modifiers-perl.
Preparing to unpack .../11-libclass-method-modifiers-perl_2.12-1_all.deb ...
Unpacking libclass-method-modifiers-perl (2.12-1) ...
Selecting previously unselected package libclone-perl.
Preparing to unpack .../12-libclone-perl_0.41-1+b1_amd64.deb ...
Unpacking libclone-perl (0.41-1+b1) ...
Selecting previously unselected package libdynaloader-functions-perl.
Preparing to unpack .../13-libdynaloader-functions-perl_0.003-1_all.deb ...
Unpacking libdynaloader-functions-perl (0.003-1) ...
Selecting previously unselected package libdevel-callchecker-perl.
Preparing to unpack .../14-libdevel-callchecker-perl_0.008-1_amd64.deb ...
Unpacking libdevel-callchecker-perl (0.008-1) ...
Selecting previously unselected package libsub-exporter-progressive-perl.
Preparing to unpack .../15-libsub-exporter-progressive-perl_0.001013-1_all.deb ...
Unpacking libsub-exporter-progressive-perl (0.001013-1) ...
Selecting previously unselected package libdevel-globaldestruction-perl.
Preparing to unpack .../16-libdevel-globaldestruction-perl_0.14-1_all.deb ...
Unpacking libdevel-globaldestruction-perl (0.14-1) ...
Selecting previously unselected package libdigest-hmac-perl.
Preparing to unpack .../17-libdigest-hmac-perl_1.03+dfsg-2_all.deb ...
Unpacking libdigest-hmac-perl (1.03+dfsg-2) ...
Selecting previously unselected package libtimedate-perl.
Preparing to unpack .../18-libtimedate-perl_2.3000-2_all.deb ...
Unpacking libtimedate-perl (2.3000-2) ...
Selecting previously unselected package libssl1.1:amd64.
Preparing to unpack .../19-libssl1.1_1.1.1c-1_amd64.deb ...
Unpacking libssl1.1:amd64 (1.1.1c-1) ...
Selecting previously unselected package perl-openssl-defaults:amd64.
Preparing to unpack .../20-perl-openssl-defaults_3_amd64.deb ...
Unpacking perl-openssl-defaults:amd64 (3) ...
Selecting previously unselected package libnet-ssleay-perl.
Preparing to unpack .../21-libnet-ssleay-perl_1.85-3_amd64.deb ...
Unpacking libnet-ssleay-perl (1.85-3) ...
Selecting previously unselected package libio-socket-ssl-perl.
Preparing to unpack .../22-libio-socket-ssl-perl_2.060-3_all.deb ...
Unpacking libio-socket-ssl-perl (2.060-3) ...
Selecting previously unselected package libnet-smtp-ssl-perl.
Preparing to unpack .../23-libnet-smtp-ssl-perl_1.04-1_all.deb ...
Unpacking libnet-smtp-ssl-perl (1.04-1) ...
Selecting previously unselected package libmailtools-perl.
Preparing to unpack .../24-libmailtools-perl_2.18-1_all.deb ...
Unpacking libmailtools-perl (2.18-1) ...
Selecting previously unselected package libnet-ip-perl.
Preparing to unpack .../25-libnet-ip-perl_1.26-2_all.deb ...
Unpacking libnet-ip-perl (1.26-2) ...
Selecting previously unselected package libnet-dns-perl.
Preparing to unpack .../26-libnet-dns-perl_1.19-1_all.deb ...
Unpacking libnet-dns-perl (1.19-1) ...
Selecting previously unselected package libnet-domain-tld-perl.
Preparing to unpack .../27-libnet-domain-tld-perl_1.75-1_all.deb ...
Unpacking libnet-domain-tld-perl (1.75-1) ...
Selecting previously unselected package libemail-valid-perl.
Preparing to unpack .../28-libemail-valid-perl_1.202-1_all.deb ...
Unpacking libemail-valid-perl (1.202-1) ...
Selecting previously unselected package libexporter-tiny-perl.
Preparing to unpack .../29-libexporter-tiny-perl_1.002001-1_all.deb ...
Unpacking libexporter-tiny-perl (1.002001-1) ...
Selecting previously unselected package libipc-system-simple-perl.
Preparing to unpack .../30-libipc-system-simple-perl_1.25-4_all.deb ...
Unpacking libipc-system-simple-perl (1.25-4) ...
Selecting previously unselected package libfile-basedir-perl.
Preparing to unpack .../31-libfile-basedir-perl_0.08-1_all.deb ...
Unpacking libfile-basedir-perl (0.08-1) ...
Selecting previously unselected package libfuture-perl.
Preparing to unpack .../32-libfuture-perl_0.39-1_all.deb ...
Unpacking libfuture-perl (0.39-1) ...
Selecting previously unselected package libparams-classify-perl.
Preparing to unpack .../33-libparams-classify-perl_0.015-1+b1_amd64.deb ...
Unpacking libparams-classify-perl (0.015-1+b1) ...
Selecting previously unselected package libmodule-runtime-perl.
Preparing to unpack .../34-libmodule-runtime-perl_0.016-1_all.deb ...
Unpacking libmodule-runtime-perl (0.016-1) ...
Selecting previously unselected package libimport-into-perl.
Preparing to unpack .../35-libimport-into-perl_1.002005-1_all.deb ...
Unpacking libimport-into-perl (1.002005-1) ...
Selecting previously unselected package libstruct-dumb-perl.
Preparing to unpack .../36-libstruct-dumb-perl_0.09-1_all.deb ...
Unpacking libstruct-dumb-perl (0.09-1) ...
Selecting previously unselected package libio-async-perl.
Preparing to unpack .../37-libio-async-perl_0.72-1_all.deb ...
Unpacking libio-async-perl (0.72-1) ...
Selecting previously unselected package libio-pty-perl.
Preparing to unpack .../38-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ...
Unpacking libio-pty-perl (1:1.08-1.1+b5) ...
Selecting previously unselected package libipc-run-perl.
Preparing to unpack .../39-libipc-run-perl_20180523.0-1_all.deb ...
Unpacking libipc-run-perl (20180523.0-1) ...
Selecting previously unselected package liblist-compare-perl.
Preparing to unpack .../40-liblist-compare-perl_0.53-1_all.deb ...
Unpacking liblist-compare-perl (0.53-1) ...
Selecting previously unselected package liblist-moreutils-perl.
Preparing to unpack .../41-liblist-moreutils-perl_0.416-1+b4_amd64.deb ...
Unpacking liblist-moreutils-perl (0.416-1+b4) ...
Selecting previously unselected package librole-tiny-perl.
Preparing to unpack .../42-librole-tiny-perl_2.000006-1_all.deb ...
Unpacking librole-tiny-perl (2.000006-1) ...
Selecting previously unselected package libstrictures-perl.
Preparing to unpack .../43-libstrictures-perl_2.000005-1_all.deb ...
Unpacking libstrictures-perl (2.000005-1) ...
Selecting previously unselected package libsub-quote-perl.
Preparing to unpack .../44-libsub-quote-perl_2.005001-1_all.deb ...
Unpacking libsub-quote-perl (2.005001-1) ...
Selecting previously unselected package libmoo-perl.
Preparing to unpack .../45-libmoo-perl_2.003004-2_all.deb ...
Unpacking libmoo-perl (2.003004-2) ...
Selecting previously unselected package libparse-debianchangelog-perl.
Preparing to unpack .../46-libparse-debianchangelog-perl_1.2.0-13_all.deb ...
Unpacking libparse-debianchangelog-perl (1.2.0-13) ...
Selecting previously unselected package libpath-tiny-perl.
Preparing to unpack .../47-libpath-tiny-perl_0.108-1_all.deb ...
Unpacking libpath-tiny-perl (0.108-1) ...
Selecting previously unselected package libtext-levenshtein-perl.
Preparing to unpack .../48-libtext-levenshtein-perl_0.13-1_all.deb ...
Unpacking libtext-levenshtein-perl (0.13-1) ...
Selecting previously unselected package libtry-tiny-perl.
Preparing to unpack .../49-libtry-tiny-perl_0.30-1_all.deb ...
Unpacking libtry-tiny-perl (0.30-1) ...
Selecting previously unselected package libtype-tiny-perl.
Preparing to unpack .../50-libtype-tiny-perl_1.004004-1_all.deb ...
Unpacking libtype-tiny-perl (1.004004-1) ...
Selecting previously unselected package libyaml-0-2:amd64.
Preparing to unpack .../51-libyaml-0-2_0.2.1-1_amd64.deb ...
Unpacking libyaml-0-2:amd64 (0.2.1-1) ...
Selecting previously unselected package libyaml-libyaml-perl.
Preparing to unpack .../52-libyaml-libyaml-perl_0.76+repack-1_amd64.deb ...
Unpacking libyaml-libyaml-perl (0.76+repack-1) ...
Selecting previously unselected package patchutils.
Preparing to unpack .../53-patchutils_0.3.4-2_amd64.deb ...
Unpacking patchutils (0.3.4-2) ...
Selecting previously unselected package t1utils.
Preparing to unpack .../54-t1utils_1.41-3_amd64.deb ...
Unpacking t1utils (1.41-3) ...
Selecting previously unselected package lintian.
Preparing to unpack .../55-lintian_2.16.0_all.deb ...
Unpacking lintian (2.16.0) ...
Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf.
Preparing to unpack .../56-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Setting up libapt-pkg-perl (0.1.36+b1) ...
Setting up libstruct-dumb-perl (0.09-1) ...
Setting up libdynaloader-functions-perl (0.003-1) ...
Setting up libclass-method-modifiers-perl (2.12-1) ...
Setting up liblist-compare-perl (0.53-1) ...
Setting up libio-pty-perl (1:1.08-1.1+b5) ...
Setting up libclone-perl (0.41-1+b1) ...
Setting up libyaml-0-2:amd64 (0.2.1-1) ...
Setting up libssl1.1:amd64 (1.1.1c-1) ...
Setting up libhtml-tagset-perl (3.20-3) ...
Setting up libfuture-perl (0.39-1) ...
Setting up libyaml-libyaml-perl (0.76+repack-1) ...
Setting up libtry-tiny-perl (0.30-1) ...
Setting up perl-openssl-defaults:amd64 (3) ...
Setting up libtext-levenshtein-perl (0.13-1) ...
Setting up libio-async-perl (0.72-1) ...
Setting up patchutils (0.3.4-2) ...
Setting up libdigest-hmac-perl (1.03+dfsg-2) ...
Setting up libipc-system-simple-perl (1.25-4) ...
Setting up libnet-domain-tld-perl (1.75-1) ...
Setting up t1utils (1.41-3) ...
Setting up diffstat (1.62-1) ...
Setting up libb-hooks-op-check-perl (0.22-1+b1) ...
Setting up libipc-run-perl (20180523.0-1) ...
Setting up libsub-exporter-progressive-perl (0.001013-1) ...
Setting up libcapture-tiny-perl (0.48-1) ...
Setting up libtimedate-perl (2.3000-2) ...
Setting up libsub-name-perl (0.21-1+b3) ...
Setting up libpath-tiny-perl (0.108-1) ...
Setting up librole-tiny-perl (2.000006-1) ...
Setting up libdevel-globaldestruction-perl (0.14-1) ...
Setting up netbase (5.6) ...
Setting up libstrictures-perl (2.000005-1) ...
Setting up libsub-quote-perl (2.005001-1) ...
Setting up libexporter-tiny-perl (1.002001-1) ...
Setting up libclass-accessor-perl (0.51-1) ...
Setting up libnet-ip-perl (1.26-2) ...
Setting up liburi-perl (1.76-1) ...
Setting up libnet-ssleay-perl (1.85-3) ...
Setting up libfile-basedir-perl (0.08-1) ...
Setting up liblist-moreutils-perl (0.416-1+b4) ...
Setting up libtype-tiny-perl (1.004004-1) ...
Setting up libnet-dns-perl (1.19-1) ...
Setting up libdevel-callchecker-perl (0.008-1) ...
Setting up libhtml-parser-perl (3.72-3+b3) ...
Setting up libio-socket-ssl-perl (2.060-3) ...
Setting up libparams-classify-perl (0.015-1+b1) ...
Setting up libcgi-pm-perl (4.40-1) ...
Setting up libnet-smtp-ssl-perl (1.04-1) ...
Setting up libmodule-runtime-perl (0.016-1) ...
Setting up libmailtools-perl (2.18-1) ...
Setting up libparse-debianchangelog-perl (1.2.0-13) ...
Setting up libemail-valid-perl (1.202-1) ...
Setting up libimport-into-perl (1.002005-1) ...
Setting up libmoo-perl (2.003004-2) ...
Setting up lintian (2.16.0) ...
Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Processing triggers for man-db (2.8.5-2) ...
Not building database; man-db/auto-update is not 'true'.
Processing triggers for libc-bin (2.28-10) ...
N: 1 tag overridden (1 error)

I: Lintian run was successful.

+------------------------------------------------------------------------------+
| Post Build                                                                   |
+------------------------------------------------------------------------------+


+------------------------------------------------------------------------------+
| Cleanup                                                                      |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
The following package was automatically installed and is no longer required:
  sensible-utils
Use 'apt autoremove' to remove it.
The following packages will be REMOVED:
  autoconf* automake* autopoint* autotools-dev* binutils-arm-linux-gnueabihf*
  bsdmainutils* cpp-8-arm-linux-gnueabihf* cpp-arm-linux-gnueabihf*
  cross-config* crossbuild-essential-armhf* debhelper* dh-autoreconf*
  dh-strip-nondeterminism* diffstat* dpkg-cross* dwz* file*
  g++-8-arm-linux-gnueabihf* g++-arm-linux-gnueabihf*
  gcc-8-arm-linux-gnueabihf* gcc-8-arm-linux-gnueabihf-base* gcc-8-base:armhf*
  gcc-8-cross-base* gcc-9-base:armhf* gcc-9-cross-base*
  gcc-arm-linux-gnueabihf* gettext* gettext-base* groff-base* intltool-debian*
  libapt-pkg-perl* libarchive-zip-perl* libasan5:armhf* libasan5-armhf-cross*
  libatomic1:armhf* libatomic1-armhf-cross* libb-hooks-op-check-perl* libbsd0*
  libbsd0:armhf* libc6:armhf* libc6-armhf-cross* libc6-dev:armhf*
  libc6-dev-armhf-cross* libcapture-tiny-perl* libcgi-pm-perl*
  libclass-accessor-perl* libclass-method-modifiers-perl* libclone-perl*
  libconfig-auto-perl* libconfig-inifiles-perl* libcroco3*
  libdebian-dpkgcross-perl* libdevel-callchecker-perl*
  libdevel-globaldestruction-perl* libdigest-hmac-perl*
  libdynaloader-functions-perl* libemail-valid-perl* libexporter-tiny-perl*
  libfile-basedir-perl* libfile-homedir-perl*
  libfile-stripnondeterminism-perl* libfile-which-perl* libfuture-perl*
  libgcc-8-dev:armhf* libgcc-8-dev-armhf-cross* libgcc1:armhf*
  libgcc1-armhf-cross* libglib2.0-0* libgomp1:armhf* libgomp1-armhf-cross*
  libhtml-parser-perl* libhtml-tagset-perl* libice-dev:armhf* libice6:armhf*
  libicu63* libimport-into-perl* libio-async-perl* libio-pty-perl*
  libio-socket-ssl-perl* libio-string-perl* libipc-run-perl*
  libipc-system-simple-perl* liblist-compare-perl* liblist-moreutils-perl*
  liblocale-gettext-perl* libmagic-mgc* libmagic1* libmailtools-perl*
  libmodule-runtime-perl* libmonkey-patch-perl* libmoo-perl* libncurses6*
  libnet-dns-perl* libnet-domain-tld-perl* libnet-ip-perl*
  libnet-smtp-ssl-perl* libnet-ssleay-perl* libparams-classify-perl*
  libparse-debianchangelog-perl* libpath-tiny-perl* libpipeline1*
  libpthread-stubs0-dev:armhf* librole-tiny-perl* libsigsegv2*
  libsm-dev:armhf* libsm6:armhf* libssl1.1* libstdc++-8-dev:armhf*
  libstdc++-8-dev-armhf-cross* libstdc++6:armhf* libstdc++6-armhf-cross*
  libstrictures-perl* libstruct-dumb-perl* libsub-delete-perl*
  libsub-exporter-progressive-perl* libsub-identify-perl* libsub-name-perl*
  libsub-quote-perl* libsuper-perl* libtcl8.6* libtcl8.6:armhf*
  libtext-levenshtein-perl* libtimedate-perl* libtool* libtry-tiny-perl*
  libtype-tiny-perl* libubsan1:armhf* libubsan1-armhf-cross* libuchardet0*
  liburi-perl* libuuid1:armhf* libx11-6:armhf* libx11-data* libx11-dev:armhf*
  libxau-dev:armhf* libxau6:armhf* libxcb1:armhf* libxcb1-dev:armhf*
  libxdmcp-dev:armhf* libxdmcp6:armhf* libxml-libxml-perl*
  libxml-namespacesupport-perl* libxml-sax-base-perl* libxml-sax-perl*
  libxml-simple-perl* libxml2* libxt-dev:armhf* libxt6:armhf* libyaml-0-2*
  libyaml-libyaml-perl* libyaml-perl* lintian* linux-libc-dev:armhf*
  linux-libc-dev-armhf-cross* m4* man-db* netbase* patchutils*
  perl-openssl-defaults* po-debconf* sbuild-build-depends-lintian-dummy:armhf*
  sbuild-build-depends-main-dummy:armhf* t1utils* tcl* tcl-dev:armhf* tcl8.6*
  tcl8.6-dev:armhf* ucf* x11-common* x11proto-core-dev* x11proto-dev*
  xorg-sgml-doctools* xtrans-dev* zlib1g:armhf* zlib1g-dev:armhf*
0 upgraded, 0 newly installed, 175 to remove and 0 not upgraded.
After this operation, 273 MB disk space will be freed.
(Reading database ... 21577 files and directories currently installed.)
Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Removing crossbuild-essential-armhf (12.6) ...
Removing g++-arm-linux-gnueabihf (4:8.3.0-1) ...
Removing gcc-arm-linux-gnueabihf (4:8.3.0-1) ...
Removing g++-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Removing gcc-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Removing binutils-arm-linux-gnueabihf (2.32.51.20190707-1) ...
Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Removing lintian (2.16.0) ...
Removing cpp-arm-linux-gnueabihf (4:8.3.0-1) ...
Removing cpp-8-arm-linux-gnueabihf (8.3.0-19cross1) ...
Removing dpkg-cross (2.6.15-3) ...
Removing cross-config (2.6.15-3) ...
Removing diffstat (1.62-1) ...
Removing libdebian-dpkgcross-perl (2.6.15-3) ...
Removing gcc-8-arm-linux-gnueabihf-base:amd64 (8.3.0-19cross1) ...
Removing libstdc++-8-dev:armhf (8.3.0-19) ...
Removing libgcc-8-dev:armhf (8.3.0-19) ...
Removing gcc-8-base:armhf (8.3.0-19) ...
Removing libstdc++-8-dev-armhf-cross (8.3.0-19cross1) ...
Removing libgcc-8-dev-armhf-cross (8.3.0-19cross1) ...
Removing gcc-8-cross-base (8.3.0-19cross1) ...
Removing libubsan1:armhf (9.1.0-8) ...
Removing libstdc++6:armhf (9.1.0-8) ...
Removing libubsan1-armhf-cross (9.1.0-8cross1) ...
Removing libstdc++6-armhf-cross (9.1.0-8cross1) ...
Removing libapt-pkg-perl (0.1.36+b1) ...
Removing libasan5:armhf (9.1.0-8) ...
Removing libasan5-armhf-cross (9.1.0-8cross1) ...
Removing libatomic1:armhf (9.1.0-8) ...
Removing libatomic1-armhf-cross (9.1.0-8cross1) ...
Removing libmoo-perl (2.003004-2) ...
Removing libimport-into-perl (1.002005-1) ...
Removing libmodule-runtime-perl (0.016-1) ...
Removing libparams-classify-perl (0.015-1+b1) ...
Removing libdevel-callchecker-perl (0.008-1) ...
Removing libb-hooks-op-check-perl (0.22-1+b1) ...
Removing libxt-dev:armhf (1:1.1.5-1+b3) ...
Removing libx11-dev:armhf (2:1.6.7-1) ...
Removing libxcb1-dev:armhf (1.13.1-2) ...
Removing libxdmcp-dev:armhf (1:1.1.2-3) ...
Removing libxt6:armhf (1:1.1.5-1+b3) ...
Removing libx11-6:armhf (2:1.6.7-1) ...
Removing libxcb1:armhf (1.13.1-2) ...
Removing libxdmcp6:armhf (1:1.1.2-3) ...
Removing libsm-dev:armhf (2:1.2.3-1) ...
Removing libice-dev:armhf (2:1.0.9-2) ...
Removing tcl-dev:armhf (8.6.9+1) ...
Removing tcl8.6-dev:armhf (8.6.9+dfsg-2) ...
Removing zlib1g-dev:armhf (1:1.2.11.dfsg-1) ...
Removing libtcl8.6:armhf (8.6.9+dfsg-2) ...
Removing zlib1g:armhf (1:1.2.11.dfsg-1) ...
Removing libsm6:armhf (2:1.2.3-1) ...
Removing libuuid1:armhf (2.33.1-0.1) ...
Removing libc6-dev-armhf-cross (2.28-10cross3) ...
Removing libgomp1-armhf-cross (9.1.0-8cross1) ...
Removing libc6-dev:armhf (2.28-10) ...
Removing libcapture-tiny-perl (0.48-1) ...
Removing libparse-debianchangelog-perl (1.2.0-13) ...
Removing libcgi-pm-perl (4.40-1) ...
Removing libclass-accessor-perl (0.51-1) ...
Removing librole-tiny-perl (2.000006-1) ...
Removing libclass-method-modifiers-perl (2.12-1) ...
Removing libclone-perl (0.41-1+b1) ...
Removing libconfig-auto-perl (0.44-1) ...
Removing libconfig-inifiles-perl (3.000001-1) ...
Removing libdevel-globaldestruction-perl (0.14-1) ...
Removing libemail-valid-perl (1.202-1) ...
Removing libnet-dns-perl (1.19-1) ...
Removing libdigest-hmac-perl (1.03+dfsg-2) ...
Removing libdynaloader-functions-perl (0.003-1) ...
Removing libtype-tiny-perl (1.004004-1) ...
Removing liblist-moreutils-perl (0.416-1+b4) ...
Removing libexporter-tiny-perl (1.002001-1) ...
Removing libfile-basedir-perl (0.08-1) ...
Removing libfile-homedir-perl (1.004-1) ...
Removing libfile-which-perl (1.23-1) ...
Removing libio-async-perl (0.72-1) ...
Removing libfuture-perl (0.39-1) ...
Removing libgcc1-armhf-cross (1:9.1.0-8cross1) ...
Removing libgomp1:armhf (9.1.0-8) ...
Removing libhtml-parser-perl (3.72-3+b3) ...
Removing libhtml-tagset-perl (3.20-3) ...
Removing libxml-simple-perl (2.25-1) ...
Removing libxml-libxml-perl (2.0134+dfsg-1) ...
update-perl-sax-parsers: Unregistering Perl SAX parser XML::LibXML::SAX::Parser with priority 50...
update-perl-sax-parsers: Unregistering Perl SAX parser XML::LibXML::SAX with priority 50...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version
Removing libipc-run-perl (20180523.0-1) ...
Removing libio-pty-perl (1:1.08-1.1+b5) ...
Removing libmailtools-perl (2.18-1) ...
Removing libnet-smtp-ssl-perl (1.04-1) ...
Removing libio-socket-ssl-perl (2.060-3) ...
Removing libio-string-perl (1.08-3) ...
Removing libipc-system-simple-perl (1.25-4) ...
Removing liblist-compare-perl (0.53-1) ...
Removing liblocale-gettext-perl (1.07-3+b4) ...
Removing libnet-domain-tld-perl (1.75-1) ...
Removing libnet-ip-perl (1.26-2) ...
Removing libnet-ssleay-perl (1.85-3) ...
Removing libpath-tiny-perl (0.108-1) ...
Removing libpthread-stubs0-dev:armhf (0.4-1) ...
Removing perl-openssl-defaults:amd64 (3) ...
Removing libssl1.1:amd64 (1.1.1c-1) ...
Removing libstrictures-perl (2.000005-1) ...
Removing libstruct-dumb-perl (0.09-1) ...
Removing libsub-exporter-progressive-perl (0.001013-1) ...
Removing libsub-name-perl (0.21-1+b3) ...
Removing libsub-quote-perl (2.005001-1) ...
Removing tcl (8.6.9+1) ...
Removing tcl8.6 (8.6.9+dfsg-2) ...
Removing libtcl8.6:amd64 (8.6.9+dfsg-2) ...
Removing libtext-levenshtein-perl (0.13-1) ...
Removing libtimedate-perl (2.3000-2) ...
Removing libtry-tiny-perl (0.30-1) ...
Removing liburi-perl (1.76-1) ...
Removing libx11-data (2:1.6.7-1) ...
Removing libxau-dev:armhf (1:1.0.8-1+b2) ...
Removing libxau6:armhf (1:1.0.8-1+b2) ...
Removing libxml-sax-perl (1.00+dfsg-1) ...
update-perl-sax-parsers: Unregistering Perl SAX parser XML::SAX::PurePerl with priority 50...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
Removing libxml-namespacesupport-perl (1.12-1) ...
Removing libxml-sax-base-perl (1.09-1) ...
Removing libyaml-libyaml-perl (0.76+repack-1) ...
Removing libyaml-0-2:amd64 (0.2.1-1) ...
Removing libyaml-perl (1.27-1) ...
Removing linux-libc-dev:armhf (4.19.37-5) ...
Removing linux-libc-dev-armhf-cross (4.19.37-5cross3) ...
Removing netbase (5.6) ...
Removing patchutils (0.3.4-2) ...
Removing t1utils (1.41-3) ...
Removing ucf (3.0038+nmu1) ...
Removing x11proto-core-dev (2018.4-4) ...
Removing x11proto-dev (2018.4-4) ...
Removing xorg-sgml-doctools (1:1.11-1) ...
Removing xtrans-dev (1.3.5-1) ...
Removing gcc-9-cross-base (9.1.0-8cross1) ...
Removing libice6:armhf (2:1.0.9-2) ...
Removing libbsd0:armhf (0.9.1-2) ...
Removing libc6-armhf-cross (2.28-10cross3) ...
Removing x11-common (1:7.7+19) ...
invoke-rc.d: could not determine current runlevel
All runlevel operations denied by policy
invoke-rc.d: policy-rc.d denied execution of stop.
Removing libgcc1:armhf (1:9.1.0-8) ...
Removing debhelper (12.1.1) ...
Removing dh-strip-nondeterminism (1.2.0-2) ...
Removing man-db (2.8.5-2) ...
Removing bsdmainutils (11.1.2+b1) ...
Removing dwz (0.12.20190711-1) ...
Removing gcc-9-base:armhf (9.1.0-8) ...
Removing po-debconf (1.0.21) ...
Removing intltool-debian (0.35.0+20060710.5) ...
Removing gettext (0.19.8.1-9) ...
Removing gettext-base (0.19.8.1-9) ...
Removing groff-base (1.22.4-3) ...
Removing libfile-stripnondeterminism-perl (1.2.0-2) ...
Removing libarchive-zip-perl (1.64-1) ...
Removing libbsd0:amd64 (0.9.1-2) ...
Removing libc6:armhf (2.28-10) ...
Removing libcroco3:amd64 (0.6.12-3) ...
Removing libglib2.0-0:amd64 (2.58.3-3) ...
Removing libxml2:amd64 (2.9.4+dfsg1-7+b3) ...
Removing libicu63:amd64 (63.2-2) ...
Removing libmonkey-patch-perl (0.03-2) ...
Removing libncurses6:amd64 (6.1+20181013-2) ...
Removing libpipeline1:amd64 (1.5.1-2) ...
Removing libsub-delete-perl (1.00002-2) ...
Removing libsuper-perl (1.20141117-1) ...
Removing libsub-identify-perl (0.14-1+b1) ...
Removing libuchardet0:amd64 (0.0.6-3) ...
Removing dh-autoreconf (19) ...
Removing automake (1:1.16.1-4) ...
Removing autoconf (2.69-11) ...
Removing autopoint (0.19.8.1-9) ...
Removing libtool (2.4.6-10) ...
Removing autotools-dev (20180224.1) ...
Removing file (1:5.35-4) ...
Removing libmagic1:amd64 (1:5.35-4) ...
Removing libmagic-mgc (1:5.35-4) ...
Removing m4 (1.4.18-2) ...
Removing libsigsegv2:amd64 (2.12-2) ...
Processing triggers for ccache (3.7.1-1) ...
Updating symlinks in /usr/lib/ccache ...
Processing triggers for libc-bin (2.28-10) ...
(Reading database ... 12561 files and directories currently installed.)
Purging configuration files for tcl8.6 (8.6.9+dfsg-2) ...
Purging configuration files for libglib2.0-0:amd64 (2.58.3-3) ...
Purging configuration files for libssl1.1:amd64 (1.1.1c-1) ...
Purging configuration files for x11-common (1:7.7+19) ...
Purging configuration files for libmagic1:amd64 (1:5.35-4) ...
Purging configuration files for lintian (2.16.0) ...
Purging configuration files for man-db (2.8.5-2) ...
Purging configuration files for libxml-sax-perl (1.00+dfsg-1) ...
Purging configuration files for cross-config (2.6.15-3) ...
Purging configuration files for bsdmainutils (11.1.2+b1) ...
Purging configuration files for ucf (3.0038+nmu1) ...
Purging configuration files for autoconf (2.69-11) ...
Purging configuration files for libc6:armhf (2.28-10) ...
Purging configuration files for groff-base (1.22.4-3) ...
Purging configuration files for netbase (5.6) ...
Purging configuration files for dpkg-cross (2.6.15-3) ...
Purging configuration files for libdebian-dpkgcross-perl (2.6.15-3) ...

+------------------------------------------------------------------------------+
| Summary                                                                      |
+------------------------------------------------------------------------------+

Build Architecture: amd64
Build Profiles: cross nocheck
Build Type: any
Build-Space: n/a
Build-Time: 14
Distribution: unstable-amd64-sbuild
Foreign Architectures: armhf
Host Architecture: armhf
Install-Time: 16
Job: /home/build/sbuild-setup/repo/pool/main/x/xpa/xpa_2.1.19-1.dsc
Lintian: pass
Machine Architecture: amd64
Package: xpa
Package-Time: 34
Source-Version: 2.1.19-1
Space: n/a
Status: successful
Version: 2.1.19-1
--------------------------------------------------------------------------------
Finished at 2019-07-13T13:52:29Z
Build needed 00:00:34, no disk space