#include "esp_camera.h" #include "FS.h" #include "SD.h" #include "time.h" #include const char *ssid = "Solace"; const char *password = "damnbrodamn"; const char *ntpServer = "pool.ntp.org"; const long gmtOffset_sec = 19800; const int daylightOffset_sec = 0; #define SD_CS_PIN 13 #define CAPTURE_INTERVAL_SEC 5 #define PWDN_GPIO_NUM -1 #define RESET_GPIO_NUM -1 #define XCLK_GPIO_NUM 0 #define SIOD_GPIO_NUM 26 #define SIOC_GPIO_NUM 27 #define Y9_GPIO_NUM 35 #define Y8_GPIO_NUM 34 #define Y7_GPIO_NUM 39 #define Y6_GPIO_NUM 36 #define Y5_GPIO_NUM 21 #define Y4_GPIO_NUM 19 #define Y3_GPIO_NUM 18 #define Y2_GPIO_NUM 5 #define VSYNC_GPIO_NUM 25 #define HREF_GPIO_NUM 23 #define PCLK_GPIO_NUM 22 void connectWiFi() { WiFi.begin(ssid, password); Serial.print("Connecting to WiFi"); while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println("\nWiFi connected"); } void startCamera() { camera_config_t config; config.ledc_channel = LEDC_CHANNEL_0; config.ledc_timer = LEDC_TIMER_0; config.pin_d0 = Y2_GPIO_NUM; config.pin_d1 = Y3_GPIO_NUM; config.pin_d2 = Y4_GPIO_NUM; config.pin_d3 = Y5_GPIO_NUM; config.pin_d4 = Y6_GPIO_NUM; config.pin_d5 = Y7_GPIO_NUM; config.pin_d6 = Y8_GPIO_NUM; config.pin_d7 = Y9_GPIO_NUM; config.pin_xclk = XCLK_GPIO_NUM; config.pin_pclk = PCLK_GPIO_NUM; config.pin_vsync = VSYNC_GPIO_NUM; config.pin_href = HREF_GPIO_NUM; config.pin_sccb_sda = SIOD_GPIO_NUM; config.pin_sccb_scl = SIOC_GPIO_NUM; config.pin_pwdn = PWDN_GPIO_NUM; config.pin_reset = RESET_GPIO_NUM; config.xclk_freq_hz = 20000000; config.pixel_format = PIXFORMAT_JPEG; if (psramFound()) { config.frame_size = FRAMESIZE_UXGA; config.jpeg_quality = 10; config.fb_count = 2; } else { config.frame_size = FRAMESIZE_SVGA; config.jpeg_quality = 12; config.fb_count = 1; } esp_err_t err = esp_camera_init(&config); if (err != ESP_OK) { Serial.printf("Camera init failed with error 0x%x", err); return; } } void startSDCard() { if (!SD.begin(SD_CS_PIN)) { Serial.println("SD Card mount failed"); return; } uint8_t cardType = SD.cardType(); if (cardType == CARD_NONE) { Serial.println("No SD card attached"); return; } Serial.println("SD Card initialized"); } String getTimestampFilename() { struct tm timeinfo; if (!getLocalTime(&timeinfo)) { return "/img_unknown.jpg"; } char filename[64]; strftime(filename, sizeof(filename), "/img_%Y%m%d_%H%M%S.jpg", &timeinfo); return String(filename); } void setup() { Serial.begin(115200); delay(1000); connectWiFi(); configTime(gmtOffset_sec, daylightOffset_sec, ntpServer); Serial.print("Waiting for NTP time"); while (!getLocalTime(nullptr)) { delay(500); Serial.print("."); } Serial.println("\nTime synchronized"); startCamera(); startSDCard(); } void loop() { camera_fb_t *fb = esp_camera_fb_get(); if (!fb) { Serial.println("Camera capture failed"); delay(CAPTURE_INTERVAL_SEC * 1000); return; } String path = getTimestampFilename(); File file = SD.open(path, FILE_WRITE); if (!file) { Serial.println("Failed to open file for writing"); } else { file.write(fb->buf, fb->len); Serial.printf("Saved: %s (%u bytes)\n", path.c_str(), fb->len); } file.close(); esp_camera_fb_return(fb); delay(CAPTURE_INTERVAL_SEC * 1000); }