import RPi.GPIO as GPIO import time # Define GPIO pins in a structured way PIN_CONFIG = { "1A": 11, "1B": 12, # GPIO17, GPIO18 "2A": 13, "2B": 16, # GPIO27, GPIO23 "3A": 15, "3B": 18, # GPIO22, GPIO24 "4A": 19, "4B": 22, # GPIO10, GPIO25 "5A": 21, "5B": 24, # GPIO9, GPIO8 "6A": 23, "6B": 26, # GPIO11, GPIO7 } # Setup GPIO mode GPIO.setmode(GPIO.BOARD) for pin in PIN_CONFIG.values(): GPIO.setup(pin, GPIO.OUT) def set_pin(position, state): """Sets the given pin position to HIGH or LOW.""" if position in PIN_CONFIG: GPIO.output(PIN_CONFIG[position], GPIO.HIGH if state else GPIO.LOW) def cleanup(): """Cleans up GPIO settings.""" GPIO.cleanup() def startup_sequence(): """Runs the startup sequence.""" # Turn on all LEDs for 3 seconds for pin in PIN_CONFIG.values(): GPIO.output(pin, GPIO.HIGH) time.sleep(3) # Turn off all LEDs for 1 second for pin in PIN_CONFIG.values(): GPIO.output(pin, GPIO.LOW) time.sleep(1) # Turn each column on for 2 seconds and off for 1 second for col in ["A", "B"]: for row in range(1, 7): GPIO.output(PIN_CONFIG[f"{row}{col}"], GPIO.HIGH) time.sleep(2) for row in range(1, 7): GPIO.output(PIN_CONFIG[f"{row}{col}"], GPIO.LOW) time.sleep(1) # Test each pin one by one for position in PIN_CONFIG.keys(): GPIO.output(PIN_CONFIG[position], GPIO.HIGH) time.sleep(1) GPIO.output(PIN_CONFIG[position], GPIO.LOW) time.sleep(0.5) if __name__ == "__main__": try: startup_sequence() while True: user_input = input( "Enter pin position (e.g., 1A, 2B) to toggle or 'q' to quit: " ).upper() if user_input == "Q": break elif user_input in PIN_CONFIG: set_pin(user_input, True) time.sleep(1) set_pin(user_input, False) else: print("Invalid input. Please enter a valid pin position.") except KeyboardInterrupt: print("\nProgram interrupted.") finally: cleanup() print("GPIO cleaned up. Goodbye!")