How to print using AirPrint

• Open the application containing the document to be printed.
• Click on the Action tab to open the Action menu.

  

• Click on Print and in the Printer Options menu displayed select HP Envy 4510.
• If modifications are required on your print, change accordingly on the options displayed.
• After all the required changes have been made, proceed to Print.

---

Troubleshoot for AirPrint

If the print job fails, try the following pointers to resolve the issue.

• Bring the router close to the printer and ensure that the printer gets continuous signal.
• Restart the printer and the router after making sure that both your devices are connected to the same Wireless Network.
• Print the Network Configuration page and check if the connection type in the report says Wireless.
• Check if Wi-Fi is turned on in your Apple device.
• Ensure that the firmware of your printer is updated to the latest version. If not log in to our customer support webpage and download the update.
• Confirm that AirPrint is enabled on your printer. If not obtained, obtain the IP address of the printer and open your browser.
• After copying the IP address on the tool bar, navigate to Network Settings, enable AirPrint and select Apply.
• Try printing from another device or computer.
• Reset the printer by disconnecting the power cord from the printer when the printer is turned on and then plug it back into power after a few seconds.