sbuild (Debian sbuild) 0.85.10ubuntu0.2 (02 May 2025) on runnervmoqczp.ih4hag31ne3evk1eddqqqnr0uc.cx.internal.cloudapp.net

+====================================================================================================+
| ros-one-pr2-description 1.13.1-2-g9a8e4fb-2025.12.06.05.52 (amd64) Sat, 06 Dec 2025 05:52:41 +0000 |
+====================================================================================================+

Package: ros-one-pr2-description
Version: 1.13.1-2-g9a8e4fb-2025.12.06.05.52
Source Version: 1.13.1-2-g9a8e4fb-2025.12.06.05.52
Distribution: bookworm
Machine Architecture: amd64
Host Architecture: amd64
Build Architecture: amd64
Build Profiles: nocheck
Build Type: binary

Unpacking /home/runner/.cache/sbuild/bookworm-amd64.tar to /tmp/tmp.sbuild.12x0ahOgrv...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
Copying /home/runner/apt_repo_dependencies/ros-one-slime-wrapper_0.4.18-2025.12.06.04.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-xmlrpcpp-dbgsym_1.17.0-35-g96d7cc306-2025.12.06.04.33_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-actionlib-dbgsym_1.14.0-7-g792eeda-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rostime_0.7.3-3-gcae00b4-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ivcon-dbgsym_0.1.7-2-g5c97b19-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-openslam-gmapping_0.2.1-17-g5105476-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rospy-message-converter_0.5.9-6-g31a9248-2025.12.06.05.27_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-libfranka_0-2025.12.06.03.42_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-topic-tools-dbgsym_1.17.0-35-g96d7cc306-2025.12.06.04.58_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-camera-calibration-parsers-dbgsym_1.12.1-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pluginlib_1.13.0-2-g51a2cb0-2025.12.06.04.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-message-generation_0.4.1-2025.12.06.03.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbash_1.15.10-1-g99fd9bb7-2025.12.06.03.43_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-sensor-msgs_1.13.2-1-g092bc23-2025.12.06.05.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-shape-msgs_1.13.2-1-g092bc23-2025.12.06.04.27_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-tutorials_0.10.3-2025.12.06.05.25_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-filters_1.9.3-2025.12.06.05.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-code-coverage_0.4.4-5-g7c273b3-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pal-carbon-collector_1.5.2-2-ga5b028b-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pal-statistics-dbgsym_1.5.2-2-ga5b028b-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscpp-core_0.7.3-3-gcae00b4-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-webkit-dependency_1.1.2-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pr2-mechanism-msgs_1.8.2-2-g992b461-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbag-snapshot_1.0.6-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-bondcpp_1.8.6-1-g398e8ed-2025.12.06.05.31_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros_1.15.10-1-g99fd9bb7-2025.12.06.03.42_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-cv-bridge-dbgsym_1.16.2-2-gcfabf72-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-setup-files_0-2025.12.06.02.48_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-jskeus-dbgsym_1.2.5-1-2025.12.06.04.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ur-msgs_1.5.0-2025.12.06.05.28_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ethercat-grant-dbgsym_0.3.2-2025.12.06.05.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-std-srvs_1.11.3-1-gf51a0429-2025.12.06.03.55_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslaunch_1.17.0-35-g96d7cc306-2025.12.06.04.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-eml-dbgsym_0-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-baldor_0.1.3-3-g10fabc5-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-message-runtime_0.4.13-2025.12.06.03.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rostime-dbgsym_0.7.3-3-gcae00b4-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-topic-tools_1.17.0-35-g96d7cc306-2025.12.06.04.58_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-qt-gui_0.4.2-15-g9726da6-2025.12.06.04.10_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-move-base-msgs_1.14.2-2025.12.06.05.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscreate_1.15.10-1-g99fd9bb7-2025.12.06.03.47_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-backward-ros_0.1.8-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-image-geometry-dbgsym_1.16.2-2-gcfabf72-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-mavlink_2025.9.9-1-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-qt-gui-core_0.4.2-15-g9726da6-2025.12.06.04.12_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-intera-core-msgs_5.3.0-2025.12.06.05.24_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rospy_1.17.0-35-g96d7cc306-2025.12.06.05.09_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-camera-calibration-parsers_1.12.1-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-hpp-fcl-dbgsym_2.4.5-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-tams-execute_0-2025.12.06.02.53_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pybind11-catkin_3.0.0-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-filters-dbgsym_1.9.3-2025.12.06.05.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ompl_1.7.0-95-g7da33b39-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pal-statistics-msgs_1.5.2-2-ga5b028b-2025.12.06.05.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-stage-dbgsym_4.3.0-17-g2d2e0724-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-camera-info-manager_1.12.1-2025.12.06.05.28_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-class-loader_0.5.2-2025.12.06.03.10_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-image-common_1.12.1-2025.12.06.05.24_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-librealsense2_2.54.2-7-ga359010b3-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-bondpy_1.8.6-1-g398e8ed-2025.12.06.05.32_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslisp-repl_0.4.18-2025.12.06.04.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosconsole-dbgsym_1.14.3-5-ge3753eec-2025.12.06.03.55_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslisp_1.9.25-2025.12.06.04.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslz4-dbgsym_1.17.0-35-g96d7cc306-2025.12.06.04.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-joint-state-publisher-gui_1.15.2-2025.12.06.05.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-geometry-msgs_1.13.2-1-g092bc23-2025.12.06.04.13_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-realtime_1.0.25-10-g6ad6177-2025.12.06.05.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscpp-dbgsym_1.17.0-35-g96d7cc306-2025.12.06.04.35_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rostest_1.17.0-35-g96d7cc306-2025.12.06.05.12_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-eigenpy_3.12.0-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-urdf-parser-plugin_1.13.2-2-g3df8012-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-qt-dotgraph_0.4.2-15-g9726da6-2025.12.06.04.08_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosparam_1.17.0-35-g96d7cc306-2025.12.06.04.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-genmsg_0.5.16-1-g7d8b6ce-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-cmake-modules_0.5.2-1-g1dc8014-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-convex-decomposition_0.1.12-3-gb722eb5-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosemacs_0.4.18-2025.12.06.04.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rostest_1.17.0-35-g96d7cc306-2025.12.06.04.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-emacs-utils_0.4.18-2025.12.06.04.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-dynamic-reconfigure_1.7.6-1-gcc4919d-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-cartesian-control-msgs_0.1.0-3-ge5796bb-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-soem_1.4.1003-1-g988013c-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-jskeus_1.2.5-1-2025.12.06.04.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-qt-gui-app_0.4.2-15-g9726da6-2025.12.06.04.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-plotjuggler-msgs_0.2.1-2025.12.06.03.55_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosrt_1.0.25-10-g6ad6177-2025.12.06.05.29_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-pytest_0.2.1-7-gcd936a5-2025.12.06.05.25_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-convex-decomposition-dbgsym_0.1.12-3-gb722eb5-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-polled-camera-dbgsym_1.12.1-2025.12.06.05.30_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-roslaunch_1.17.0-35-g96d7cc306-2025.12.06.04.53_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosservice_1.17.0-35-g96d7cc306-2025.12.06.04.25_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ur-client-library_2.6.1-1-gf04e347-2025.12.06.02.54_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-baxter-description_1.2.0-2025.12.06.05.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-librealsense2-dbgsym_2.54.2-7-ga359010b3-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-gl-dependency_1.1.2-1-g337fcfc-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ruckig_0.14.0-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-apriltag-dbgsym_3.4.5-13-g22b44c1-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-eigen-stl-containers_0.1.8-2-gd2a41f0-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-timed-roslaunch_0.2.0-2025.12.06.05.29_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-control-msgs_1.5.2-6-g36e2e30-2025.12.06.05.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-bondcpp-dbgsym_1.8.6-1-g398e8ed-2025.12.06.05.31_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-uuid-msgs_1.0.6-9-g39b8b62-2025.12.06.05.28_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscpp_1.17.0-35-g96d7cc306-2025.12.06.04.35_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-random-numbers-dbgsym_0.3.3-1-g51f6043-2025.12.06.03.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosgraph_1.17.0-35-g96d7cc306-2025.12.06.04.17_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslib_1.15.10-1-g99fd9bb7-2025.12.06.03.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-catkin-virtualenv-inherited_0.17.0-2-g413b26a-2025.12.06.05.27_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-graph-msgs_0.1.0-3-g530fe7c-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosout_1.17.0-35-g96d7cc306-2025.12.06.04.38_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-python-qt-binding_0.4.4-13-gacea937-2025.12.06.03.54_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-plotjuggler-dbgsym_3.14.1-4-g9761509b-2025.12.06.05.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-roscpp_1.17.0-35-g96d7cc306-2025.12.06.04.49_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-actionlib_1.14.0-7-g792eeda-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rospack-dbgsym_2.6.4-1-gfd4d6fd-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-qt-gui-py-common_0.4.2-15-g9726da6-2025.12.06.04.16_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbag-dbgsym_1.17.0-35-g96d7cc306-2025.12.06.05.00_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosgraph-msgs_1.11.3-1-gf51a0429-2025.12.06.03.54_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosauth_1.0.1-1-gc2a5908-2025.12.06.05.24_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-openslam-gmapping-dbgsym_0.2.1-17-g5105476-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-franka-lock-unlock_0-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-image-geometry_1.16.2-2-gcfabf72-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbuild_1.15.10-1-g99fd9bb7-2025.12.06.03.45_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-cv-bridge_1.16.2-2-gcfabf72-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-qt-gui-cpp-dbgsym_0.4.2-15-g9726da6-2025.12.06.04.13_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-urg-c_1.0.405-1-gbbe007f-2025.12.06.02.53_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rosparam_1.17.0-35-g96d7cc306-2025.12.06.04.56_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pinocchio_3.6.0-2025.12.06.03.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-mk_1.15.10-1-g99fd9bb7-2025.12.06.03.41_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-trajectory-msgs_1.13.2-1-g092bc23-2025.12.06.04.30_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-geometric-shapes-dbgsym_0.7.7-1-gc24eb49-2025.12.06.05.24_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-intera-tools-description_5.3.0-2025.12.06.05.27_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-lockfree_1.0.25-10-g6ad6177-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-baxter-maintenance-msgs_1.2.0-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-turtlesim_0.10.3-2025.12.06.05.30_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-vision-opencv_1.16.2-2-gcfabf72-2025.12.06.05.32_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-allocators_1.0.25-10-g6ad6177-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-gencpp_0-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-resource-retriever-dbgsym_1.12.7-5-g40d08d6-2025.12.06.04.05_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosatomic_1.0.25-10-g6ad6177-2025.12.06.05.24_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosmake_1.15.10-1-g99fd9bb7-2025.12.06.03.49_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-std-msgs_0.5.13-1-gf3554d4-2025.12.06.03.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-unique-id_1.0.6-9-g39b8b62-2025.12.06.05.30_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-eml_0-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-boost-sml-dbgsym_0.1.2-6-gaaddc80-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-unique-identifier_1.0.6-9-g39b8b62-2025.12.06.05.27_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-opw-kinematics_0.5.2-1-g7b9d56e-2025.12.06.03.10_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosconsole-bridge_0.5.4-1-g38b0830-2025.12.06.04.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-bond_1.8.6-1-g398e8ed-2025.12.06.05.34_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-joint-state-publisher_1.15.2-2025.12.06.05.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rospack_2.6.4-1-gfd4d6fd-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosmsg_1.17.0-35-g96d7cc306-2025.12.06.04.44_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ompl-dbgsym_1.7.0-95-g7da33b39-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-slime-ros_0.4.18-2025.12.06.04.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-urdf_1.13.2-2-g3df8012-2025.12.06.05.27_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rosservice_1.17.0-35-g96d7cc306-2025.12.06.05.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-lockfree-dbgsym_1.0.25-10-g6ad6177-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rosmaster_1.17.0-35-g96d7cc306-2025.12.06.04.55_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-euslisp-dbgsym_9.29.0-2-2025.12.06.03.59_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-geneus_3.0.0-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-baxter-common_1.2.0-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rospy-tutorials_0.10.3-2025.12.06.05.29_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-message-filters-dbgsym_1.17.0-35-g96d7cc306-2025.12.06.04.40_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-intera-motion-msgs_5.3.0-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosconsole-bridge-dbgsym_0.5.4-1-g38b0830-2025.12.06.04.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-xmlrpcpp_1.17.0-35-g96d7cc306-2025.12.06.04.33_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-apriltag_3.4.5-13-g22b44c1-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-opencv-tests_1.16.2-2-gcfabf72-2025.12.06.05.25_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-baxter-core-msgs_1.2.0-2025.12.06.05.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rosbag-storage_1.17.0-35-g96d7cc306-2025.12.06.04.48_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-cpp-common-dbgsym_0.7.3-3-gcae00b4-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-resource-retriever_1.12.7-5-g40d08d6-2025.12.06.04.05_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-message-filters_1.17.0-35-g96d7cc306-2025.12.06.04.40_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-vision-msgs_0.0.2-2025.12.06.05.31_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-smclib_1.8.6-1-g398e8ed-2025.12.06.05.30_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslint_0.12.0-4-gac02636-2025.12.06.02.53_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ml-classifiers-dbgsym_0.3.0-13-gff40451-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslz4_1.17.0-35-g96d7cc306-2025.12.06.04.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-object-recognition-msgs_0.4.2-2025.12.06.05.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-octomap-msgs_0.3.5-1-gdcaaf62-2025.12.06.05.29_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-angles_1.9.13-2-g2392b18-2025.12.06.03.54_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-stereo-msgs_1.13.2-1-g092bc23-2025.12.06.05.06_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-behaviortree-cpp-dbgsym_4.6.2-39-g3a00bc3-2025.12.06.03.54_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-genlisp_0.4.18-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-sparse-bundle-adjustment_0.4.4-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rosgraph_1.17.0-35-g96d7cc306-2025.12.06.04.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roswtf_1.17.0-35-g96d7cc306-2025.12.06.05.02_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-common-msgs_1.13.2-1-g092bc23-2025.12.06.04.10_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-plotjuggler_3.14.1-4-g9761509b-2025.12.06.05.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-camera-info-manager-dbgsym_1.12.1-2025.12.06.05.28_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscpp-traits_0.7.3-3-gcae00b4-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-comm_1.17.0-35-g96d7cc306-2025.12.06.04.16_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pinocchio-dbgsym_3.6.0-2025.12.06.03.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ruckig-dbgsym_0.14.0-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-urdfdom-py_0.4.6-2025.12.06.05.28_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-geometric-shapes_0.7.7-1-gc24eb49-2025.12.06.05.24_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-qt-gui-cpp_0.4.2-15-g9726da6-2025.12.06.04.13_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-prosilica-gige-sdk_1.26.3-2025.12.06.03.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-image-transport_1.12.1-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pal-statistics_1.5.2-2-ga5b028b-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-cpp-common_0.7.3-3-gcae00b4-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosout-dbgsym_1.17.0-35-g96d7cc306-2025.12.06.04.38_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-media-export_0.3.0-2025.12.06.03.03_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-catkin-virtualenv-inherited-dbgsym_0.17.0-2-g413b26a-2025.12.06.05.27_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ur-client-library-dbgsym_2.6.1-1-gf04e347-2025.12.06.02.54_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosboost-cfg_1.15.10-1-g99fd9bb7-2025.12.06.03.44_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-visualization-msgs_1.13.2-1-g092bc23-2025.12.06.04.32_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosclean_1.15.10-1-g99fd9bb7-2025.12.06.03.46_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosdoc-lite_0.2.11-2-gddd0835-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-type-introspection-dbgsym_0-2025.12.06.05.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-urdf-dbgsym_1.13.2-2-g3df8012-2025.12.06.05.27_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbag-migration-rule_1.0.1-1-g2269b62-2025.12.06.02.53_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-turtlesim-dbgsym_0.10.3-2025.12.06.05.30_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbag-storage-dbgsym_1.17.0-35-g96d7cc306-2025.12.06.04.41_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbag_1.17.0-35-g96d7cc306-2025.12.06.05.00_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslang_1.15.10-1-g99fd9bb7-2025.12.06.03.48_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosrt-dbgsym_1.0.25-10-g6ad6177-2025.12.06.05.29_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosnode_1.17.0-35-g96d7cc306-2025.12.06.04.45_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-four-wheel-steering-msgs_1.1.1-2025.12.06.03.54_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-eigenpy-dbgsym_3.12.0-2025.12.06.02.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-intera-common_5.3.0-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-view-controller-msgs_0.2.0-2025.12.06.05.30_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-catkin-virtualenv-dbgsym_0.17.0-2-g413b26a-2025.12.06.05.25_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-diagnostic-msgs_1.13.2-1-g092bc23-2025.12.06.04.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ml-classifiers_0.3.0-13-gff40451-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-random-numbers_0.3.3-1-g51f6043-2025.12.06.03.04_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ethercat-grant_0.3.2-2025.12.06.05.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-pcl-msgs_0.3.0-1-g89b0725-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-qwt-dependency_1.1.1-2-g91d8aee-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-bond-core_1.8.6-1-g398e8ed-2025.12.06.05.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-soem-dbgsym_1.4.1003-1-g988013c-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbag-storage_1.17.0-35-g96d7cc306-2025.12.06.04.41_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-nav-msgs_1.13.2-1-g092bc23-2025.12.06.04.14_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-environment_1.3.2-5-g2686e94-2025.12.06.02.48_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosunit_1.15.10-1-g99fd9bb7-2025.12.06.03.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-dynamic-reconfigure-dbgsym_1.7.6-1-gcc4919d-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roslib-dbgsym_1.15.10-1-g99fd9bb7-2025.12.06.03.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rethink-ee-description_1.2.0-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscpp-serialization-dbgsym_0.7.3-3-gcae00b4-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-behaviortree-cpp_4.6.2-39-g3a00bc3-2025.12.06.03.54_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-libfranka-dbgsym_0-2025.12.06.03.42_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ivcon_0.1.7-2-g5c97b19-2025.12.06.02.51_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-urg-c-dbgsym_1.0.405-1-gbbe007f-2025.12.06.02.53_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-catkin-virtualenv_0.17.0-2-g413b26a-2025.12.06.05.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rosbag_1.17.0-35-g96d7cc306-2025.12.06.05.07_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-sparse-bundle-adjustment-dbgsym_0.4.4-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-type-introspection_0-2025.12.06.05.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-bond_1.8.6-1-g398e8ed-2025.12.06.05.19_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-xacro_1.15.0-1-g3d061ea-2025.12.06.05.29_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosconsole_1.14.3-5-ge3753eec-2025.12.06.03.55_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-hpp-fcl_2.4.5-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-roslib-comm_1.17.0-35-g96d7cc306-2025.12.06.04.29_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rospy_1.17.0-35-g96d7cc306-2025.12.06.04.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-catkin-virtualenv_0.17.0-2-g413b26a-2025.12.06.05.25_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbag-snapshot-msgs_1.0.6-2025.12.06.05.22_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-image-transport-dbgsym_1.12.1-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscpp-tutorials-dbgsym_0.10.3-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscpp-serialization_0.7.3-3-gcae00b4-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-test-rostopic_1.17.0-35-g96d7cc306-2025.12.06.05.14_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-euslisp_9.29.0-2-2025.12.06.03.59_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-roscpp-tutorials_0.10.3-2025.12.06.05.26_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-actionlib-tools_1.14.0-7-g792eeda-2025.12.06.05.20_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-map-msgs_1.14.2-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-polled-camera_1.12.1-2025.12.06.05.30_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-boost-sml_0.1.2-6-gaaddc80-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-backward-ros-dbgsym_0.1.8-2025.12.06.05.18_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-class-loader-dbgsym_0.5.2-2025.12.06.03.10_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosmaster_1.17.0-35-g96d7cc306-2025.12.06.04.21_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-stage_4.3.0-17-g2d2e0724-2025.12.06.02.52_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-gennodejs_2.0.1-8-g19d224c-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosbag-snapshot-dbgsym_1.0.6-2025.12.06.05.23_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rostopic_1.17.0-35-g96d7cc306-2025.12.06.04.46_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-actionlib-msgs_1.13.2-1-g092bc23-2025.12.06.04.09_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-genpy_0-2025.12.06.03.11_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-rosauth-dbgsym_1.0.1-1-gc2a5908-2025.12.06.05.24_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-teleop-twist-keyboard_1.0.0-11-g8e1e14f-2025.12.06.05.32_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo_dependencies/ros-one-ros-industrial-cmake-boilerplate_0.7.4-2025.12.06.02.53_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-joy-teleop_0.5.0-2025.12.06.05.42_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-collada-urdf_1.12.13-1-g4d944c2-2025.12.06.05.40_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-mouse-teleop_0.5.0-2025.12.06.05.46_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-collada-urdf-dbgsym_1.12.13-1-g4d944c2-2025.12.06.05.40_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-collada-parser-dbgsym_1.12.13-1-g4d944c2-2025.12.06.05.37_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-pr2-common_1.13.1-2-g9a8e4fb-2025.12.06.05.48_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-pr2-dashboard-aggregator_1.13.1-2-g9a8e4fb-2025.12.06.05.50_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-collada-parser_1.12.13-1-g4d944c2-2025.12.06.05.37_amd64.deb to /<<CHROOT>>...
Copying /home/runner/apt_repo/ros-one-key-teleop_0.5.0-2025.12.06.05.44_amd64.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/package//resolver-1kFLLm' with '<<RESOLVERDIR>>'

+------------------------------------------------------------------------------+
| Update chroot                                Sat, 06 Dec 2025 05:54:08 +0000 |
+------------------------------------------------------------------------------+

Get:1 file:/build/package//resolver-LZb6Cm/apt_archive ./ InRelease
Ign:1 file:/build/package//resolver-LZb6Cm/apt_archive ./ InRelease
Get:2 file:/build/package//resolver-LZb6Cm/apt_archive ./ Release [612 B]
Get:2 file:/build/package//resolver-LZb6Cm/apt_archive ./ Release [612 B]
Get:3 file:/build/package//resolver-LZb6Cm/apt_archive ./ Release.gpg
Ign:3 file:/build/package//resolver-LZb6Cm/apt_archive ./ Release.gpg
Get:4 file:/build/package//resolver-LZb6Cm/apt_archive ./ Packages [219 kB]
Get:5 http://security.debian.org/debian-security bookworm-security InRelease [48.0 kB]
Get:6 http://deb.debian.org/debian bookworm InRelease [151 kB]
Get:7 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]
Get:8 http://security.debian.org/debian-security bookworm-security/main amd64 Packages [289 kB]
Get:9 http://deb.debian.org/debian bookworm/main amd64 Packages [8791 kB]
Get:10 http://deb.debian.org/debian bookworm-updates/main amd64 Packages [6924 B]
Fetched 9342 kB in 1s (11.0 MB/s)
Reading package lists...
W: Skipping acquire of configured file 'universe/binary-amd64/Packages' as repository 'http://security.debian.org/debian-security bookworm-security InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'universe/binary-amd64/Packages' as repository 'http://deb.debian.org/debian bookworm InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'universe/binary-amd64/Packages' as repository 'http://deb.debian.org/debian bookworm-updates InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

+------------------------------------------------------------------------------+
| Fetch source files                           Sat, 06 Dec 2025 05:54:10 +0000 |
+------------------------------------------------------------------------------+


Local sources
-------------

/home/runner/work/ros-o-builder/ros-o-builder/src/pr2_common/ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52.dsc exists in /home/runner/work/ros-o-builder/ros-o-builder/src/pr2_common; copying to chroot
I: NOTICE: Log filtering will replace 'build/package//package' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/package/' with '<<BUILDDIR>>'

+------------------------------------------------------------------------------+
| Install package build dependencies           Sat, 06 Dec 2025 05:54:11 +0000 |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: debhelper (>= 9.0.0), catkin, libgmock-dev, libgtest-dev, ros-one-convex-decomposition, ros-one-ivcon, ros-one-setup-files, ros-one-ros-environment, build-essential, fakeroot, dumb-init
Filtered Build-Depends: debhelper (>= 9.0.0), catkin, libgmock-dev, libgtest-dev, ros-one-convex-decomposition, ros-one-ivcon, ros-one-setup-files, ros-one-ros-environment, build-essential, fakeroot, dumb-init
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [807 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [784 B]
Fetched 2200 B in 0s (0 B/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ Release [612 B]
Get:2 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ Release [612 B]
Get:3 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...

Install main build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  autoconf automake autopoint autotools-dev bsdextrautils catkin cmake
  cmake-data cmake-extras debhelper dh-autoreconf dh-strip-nondeterminism
  docutils-common dumb-init dwz fakeroot file gettext gettext-base googletest
  groff-base intltool-debian libarchive-zip-perl libarchive13 libcurl4
  libdebhelper-perl libelf1 libexpat1-dev libfakeroot
  libfile-stripnondeterminism-perl libgmock-dev libgtest-dev libicu72
  libjs-jquery libjs-sphinxdoc libjs-underscore libjsoncpp25 libmagic-mgc
  libmagic1 libncursesw6 libpipeline1 libpkgconf3 libproc2-0 libpython3-dev
  libpython3-stdlib libpython3.11 libpython3.11-dev libpython3.11-minimal
  libpython3.11-stdlib libreadline8 librhash0 libsqlite3-0
  libsub-override-perl libtool libuchardet0 libuv1 libxml2 m4 man-db
  media-types pkg-config pkgconf pkgconf-bin po-debconf procps python3
  python3-catkin python3-catkin-pkg python3-dateutil python3-dev
  python3-distutils python3-docutils python3-empy python3-lib2to3
  python3-minimal python3-pkg-resources python3-pyparsing python3-roman
  python3-setuptools python3-six python3.11 python3.11-dev python3.11-minimal
  readline-common ros-environment ros-one-convex-decomposition ros-one-ivcon
  ros-one-ros-environment ros-one-setup-files sensible-utils sgml-base tzdata
  unzip xml-core zlib1g-dev
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc cmake-doc cmake-format
  elpa-cmake-mode ninja-build dh-make gettext-doc libasprintf-dev
  libgettextpo-dev groff lrzip libtool-doc gfortran | fortran95-compiler
  gcj-jdk m4-doc apparmor less www-browser libmail-box-perl python3-doc
  python3-tk python3-venv docutils-doc fonts-linuxlibertine
  | ttf-linux-libertine texlive-lang-french texlive-latex-base
  texlive-latex-recommended python-pyparsing-doc python-setuptools-doc
  python3.11-venv python3.11-doc binfmt-support readline-doc sgml-base-doc zip
Recommended packages:
  bash-completion curl | wget | lynx libarchive-cpio-perl javascript-common
  libgpm2 libltdl-dev libmail-sendmail-perl psmisc libpaper-utils python3-pil
  python3-pygments
The following NEW packages will be installed:
  autoconf automake autopoint autotools-dev bsdextrautils catkin cmake
  cmake-data cmake-extras debhelper dh-autoreconf dh-strip-nondeterminism
  docutils-common dumb-init dwz fakeroot file gettext gettext-base googletest
  groff-base intltool-debian libarchive-zip-perl libarchive13 libcurl4
  libdebhelper-perl libelf1 libexpat1-dev libfakeroot
  libfile-stripnondeterminism-perl libgmock-dev libgtest-dev libicu72
  libjs-jquery libjs-sphinxdoc libjs-underscore libjsoncpp25 libmagic-mgc
  libmagic1 libncursesw6 libpipeline1 libpkgconf3 libproc2-0 libpython3-dev
  libpython3-stdlib libpython3.11 libpython3.11-dev libpython3.11-minimal
  libpython3.11-stdlib libreadline8 librhash0 libsqlite3-0
  libsub-override-perl libtool libuchardet0 libuv1 libxml2 m4 man-db
  media-types pkg-config pkgconf pkgconf-bin po-debconf procps python3
  python3-catkin python3-catkin-pkg python3-dateutil python3-dev
  python3-distutils python3-docutils python3-empy python3-lib2to3
  python3-minimal python3-pkg-resources python3-pyparsing python3-roman
  python3-setuptools python3-six python3.11 python3.11-dev python3.11-minimal
  readline-common ros-environment ros-one-convex-decomposition ros-one-ivcon
  ros-one-ros-environment ros-one-setup-files sbuild-build-depends-main-dummy
  sensible-utils sgml-base tzdata unzip xml-core zlib1g-dev
0 upgraded, 96 newly installed, 0 to remove and 0 not upgraded.
Need to get 50.6 MB/50.7 MB of archives.
After this operation, 200 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [948 B]
Get:2 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ ros-one-convex-decomposition 0.1.12-3-gb722eb5-2025.12.06.02.50 [70.9 kB]
Get:3 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ ros-one-ivcon 0.1.7-2-g5c97b19-2025.12.06.02.51 [71.3 kB]
Get:4 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ ros-one-setup-files 0-2025.12.06.02.48 [10.7 kB]
Get:5 file:/<<BUILDDIR>>/resolver-LZb6Cm/apt_archive ./ ros-one-ros-environment 1.3.2-5-g2686e94-2025.12.06.02.48 [5892 B]
Get:6 http://deb.debian.org/debian bookworm/main amd64 libpython3.11-minimal amd64 3.11.2-6+deb12u6 [817 kB]
Get:7 http://deb.debian.org/debian bookworm/main amd64 python3.11-minimal amd64 3.11.2-6+deb12u6 [2064 kB]
Get:8 http://deb.debian.org/debian bookworm/main amd64 python3-minimal amd64 3.11.2-1+b1 [26.3 kB]
Get:9 http://deb.debian.org/debian bookworm/main amd64 media-types all 10.0.0 [26.1 kB]
Get:10 http://deb.debian.org/debian bookworm/main amd64 libncursesw6 amd64 6.4-4 [134 kB]
Get:11 http://deb.debian.org/debian bookworm/main amd64 readline-common all 8.2-1.3 [69.0 kB]
Get:12 http://deb.debian.org/debian bookworm/main amd64 libreadline8 amd64 8.2-1.3 [166 kB]
Get:13 http://deb.debian.org/debian bookworm/main amd64 libsqlite3-0 amd64 3.40.1-2+deb12u2 [839 kB]
Get:14 http://deb.debian.org/debian bookworm/main amd64 libpython3.11-stdlib amd64 3.11.2-6+deb12u6 [1798 kB]
Get:15 http://deb.debian.org/debian bookworm/main amd64 python3.11 amd64 3.11.2-6+deb12u6 [573 kB]
Get:16 http://deb.debian.org/debian bookworm/main amd64 libpython3-stdlib amd64 3.11.2-1+b1 [9312 B]
Get:17 http://deb.debian.org/debian bookworm/main amd64 python3 amd64 3.11.2-1+b1 [26.3 kB]
Get:18 http://deb.debian.org/debian bookworm/main amd64 sgml-base all 1.31 [15.4 kB]
Get:19 http://deb.debian.org/debian bookworm/main amd64 tzdata all 2025b-0+deb12u2 [300 kB]
Get:20 http://deb.debian.org/debian bookworm/main amd64 libproc2-0 amd64 2:4.0.2-3 [62.8 kB]
Get:21 http://deb.debian.org/debian bookworm/main amd64 procps amd64 2:4.0.2-3 [709 kB]
Get:22 http://deb.debian.org/debian bookworm/main amd64 sensible-utils all 0.0.17+nmu1 [19.0 kB]
Get:23 http://deb.debian.org/debian bookworm/main amd64 libmagic-mgc amd64 1:5.44-3 [305 kB]
Get:24 http://deb.debian.org/debian bookworm/main amd64 libmagic1 amd64 1:5.44-3 [104 kB]
Get:25 http://deb.debian.org/debian bookworm/main amd64 file amd64 1:5.44-3 [42.5 kB]
Get:26 http://deb.debian.org/debian bookworm/main amd64 gettext-base amd64 0.21-12 [160 kB]
Get:27 http://deb.debian.org/debian bookworm/main amd64 libuchardet0 amd64 0.0.7-1 [67.8 kB]
Get:28 http://deb.debian.org/debian bookworm/main amd64 groff-base amd64 1.22.4-10 [916 kB]
Get:29 http://deb.debian.org/debian bookworm/main amd64 bsdextrautils amd64 2.38.1-5+deb12u3 [87.0 kB]
Get:30 http://deb.debian.org/debian bookworm/main amd64 libpipeline1 amd64 1.5.7-1 [38.5 kB]
Get:31 http://deb.debian.org/debian bookworm/main amd64 man-db amd64 2.11.2-2 [1386 kB]
Get:32 http://deb.debian.org/debian bookworm/main amd64 m4 amd64 1.4.19-3 [287 kB]
Get:33 http://deb.debian.org/debian bookworm/main amd64 autoconf all 2.71-3 [332 kB]
Get:34 http://deb.debian.org/debian bookworm/main amd64 autotools-dev all 20220109.1 [51.6 kB]
Get:35 http://deb.debian.org/debian bookworm/main amd64 automake all 1:1.16.5-1.3 [823 kB]
Get:36 http://deb.debian.org/debian bookworm/main amd64 autopoint all 0.21-12 [495 kB]
Get:37 http://deb.debian.org/debian bookworm/main amd64 python3-six all 1.16.0-4 [17.5 kB]
Get:38 http://deb.debian.org/debian bookworm/main amd64 python3-dateutil all 2.8.2-2 [78.3 kB]
Get:39 http://deb.debian.org/debian bookworm/main amd64 xml-core all 0.18+nmu1 [23.8 kB]
Get:40 http://deb.debian.org/debian bookworm/main amd64 docutils-common all 0.19+dfsg-6 [127 kB]
Get:41 http://deb.debian.org/debian bookworm/main amd64 python3-roman all 3.3-3 [9880 B]
Get:42 http://deb.debian.org/debian bookworm/main amd64 python3-docutils all 0.19+dfsg-6 [382 kB]
Get:43 http://deb.debian.org/debian bookworm/main amd64 python3-pkg-resources all 66.1.1-1+deb12u2 [297 kB]
Get:44 http://deb.debian.org/debian bookworm/main amd64 python3-pyparsing all 3.0.9-1 [138 kB]
Get:45 http://deb.debian.org/debian bookworm/main amd64 python3-catkin-pkg all 0.5.2-5 [48.4 kB]
Get:46 http://deb.debian.org/debian bookworm/main amd64 python3-catkin all 0.8.10-9 [36.3 kB]
Get:47 http://deb.debian.org/debian bookworm/main amd64 python3-empy all 3.3.4-2 [66.1 kB]
Get:48 http://deb.debian.org/debian bookworm/main amd64 python3-lib2to3 all 3.11.2-3 [76.3 kB]
Get:49 http://deb.debian.org/debian bookworm/main amd64 python3-distutils all 3.11.2-3 [131 kB]
Get:50 http://deb.debian.org/debian bookworm/main amd64 python3-setuptools all 66.1.1-1+deb12u2 [522 kB]
Get:51 http://deb.debian.org/debian bookworm/main amd64 libicu72 amd64 72.1-3+deb12u1 [9376 kB]
Get:52 http://deb.debian.org/debian bookworm/main amd64 libxml2 amd64 2.9.14+dfsg-1.3~deb12u4 [687 kB]
Get:53 http://deb.debian.org/debian bookworm/main amd64 libarchive13 amd64 3.6.2-1+deb12u3 [343 kB]
Get:54 http://deb.debian.org/debian bookworm/main amd64 libcurl4 amd64 7.88.1-10+deb12u14 [392 kB]
Get:55 http://deb.debian.org/debian bookworm/main amd64 libjsoncpp25 amd64 1.9.5-4 [78.6 kB]
Get:56 http://deb.debian.org/debian bookworm/main amd64 librhash0 amd64 1.4.3-3 [134 kB]
Get:57 http://deb.debian.org/debian bookworm/main amd64 libuv1 amd64 1.44.2-1+deb12u1 [136 kB]
Get:58 http://deb.debian.org/debian bookworm/main amd64 cmake-data all 3.25.1-1 [2026 kB]
Get:59 http://deb.debian.org/debian bookworm/main amd64 cmake amd64 3.25.1-1 [8692 kB]
Get:60 http://deb.debian.org/debian bookworm/main amd64 libpkgconf3 amd64 1.8.1-1 [36.1 kB]
Get:61 http://deb.debian.org/debian bookworm/main amd64 pkgconf-bin amd64 1.8.1-1 [29.5 kB]
Get:62 http://deb.debian.org/debian bookworm/main amd64 pkgconf amd64 1.8.1-1 [25.9 kB]
Get:63 http://deb.debian.org/debian bookworm/main amd64 pkg-config amd64 1.8.1-1 [13.7 kB]
Get:64 http://deb.debian.org/debian bookworm/main amd64 cmake-extras all 1.6-1 [58.1 kB]
Get:65 http://deb.debian.org/debian bookworm/main amd64 ros-environment all 1.3.2-2 [6156 B]
Get:66 http://deb.debian.org/debian bookworm/main amd64 catkin all 0.8.10-9 [94.4 kB]
Get:67 http://deb.debian.org/debian bookworm/main amd64 libdebhelper-perl all 13.11.4 [81.2 kB]
Get:68 http://deb.debian.org/debian bookworm/main amd64 libtool all 2.4.7-7~deb12u1 [517 kB]
Get:69 http://deb.debian.org/debian bookworm/main amd64 dh-autoreconf all 20 [17.1 kB]
Get:70 http://deb.debian.org/debian bookworm/main amd64 libarchive-zip-perl all 1.68-1 [104 kB]
Get:71 http://deb.debian.org/debian bookworm/main amd64 libsub-override-perl all 0.09-4 [9304 B]
Get:72 http://deb.debian.org/debian bookworm/main amd64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB]
Get:73 http://deb.debian.org/debian bookworm/main amd64 dh-strip-nondeterminism all 1.13.1-1 [8620 B]
Get:74 http://deb.debian.org/debian bookworm/main amd64 libelf1 amd64 0.188-2.1 [174 kB]
Get:75 http://deb.debian.org/debian bookworm/main amd64 dwz amd64 0.15-1 [109 kB]
Get:76 http://deb.debian.org/debian bookworm/main amd64 gettext amd64 0.21-12 [1300 kB]
Get:77 http://deb.debian.org/debian bookworm/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB]
Get:78 http://deb.debian.org/debian bookworm/main amd64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:79 http://deb.debian.org/debian bookworm/main amd64 debhelper all 13.11.4 [942 kB]
Get:80 http://deb.debian.org/debian bookworm/main amd64 dumb-init amd64 1.2.5-2 [14.1 kB]
Get:81 http://deb.debian.org/debian bookworm/main amd64 libfakeroot amd64 1.31-1.2 [28.3 kB]
Get:82 http://deb.debian.org/debian bookworm/main amd64 fakeroot amd64 1.31-1.2 [66.9 kB]
Get:83 http://deb.debian.org/debian bookworm/main amd64 googletest all 1.12.1-0.2 [506 kB]
Get:84 http://deb.debian.org/debian bookworm/main amd64 libexpat1-dev amd64 2.5.0-1+deb12u2 [151 kB]
Get:85 http://deb.debian.org/debian bookworm/main amd64 libgtest-dev amd64 1.12.1-0.2 [240 kB]
Get:86 http://deb.debian.org/debian bookworm/main amd64 libgmock-dev amd64 1.12.1-0.2 [131 kB]
Get:87 http://deb.debian.org/debian bookworm/main amd64 libjs-jquery all 3.6.1+dfsg+~3.5.14-1 [326 kB]
Get:88 http://deb.debian.org/debian bookworm/main amd64 libjs-underscore all 1.13.4~dfsg+~1.11.4-3 [116 kB]
Get:89 http://deb.debian.org/debian bookworm/main amd64 libjs-sphinxdoc all 5.3.0-4 [130 kB]
Get:90 http://deb.debian.org/debian bookworm/main amd64 libpython3.11 amd64 3.11.2-6+deb12u6 [1987 kB]
Get:91 http://deb.debian.org/debian bookworm/main amd64 zlib1g-dev amd64 1:1.2.13.dfsg-1 [916 kB]
Get:92 http://deb.debian.org/debian bookworm/main amd64 libpython3.11-dev amd64 3.11.2-6+deb12u6 [4742 kB]
Get:93 http://deb.debian.org/debian bookworm/main amd64 libpython3-dev amd64 3.11.2-1+b1 [9572 B]
Get:94 http://deb.debian.org/debian bookworm/main amd64 python3.11-dev amd64 3.11.2-6+deb12u6 [615 kB]
Get:95 http://deb.debian.org/debian bookworm/main amd64 python3-dev amd64 3.11.2-1+b1 [26.2 kB]
Get:96 http://deb.debian.org/debian bookworm/main amd64 unzip amd64 6.0-28 [166 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 50.6 MB in 0s (162 MB/s)
Selecting previously unselected package libpython3.11-minimal:amd64.
(Reading database ... 12472 files and directories currently installed.)
Preparing to unpack .../libpython3.11-minimal_3.11.2-6+deb12u6_amd64.deb ...
Unpacking libpython3.11-minimal:amd64 (3.11.2-6+deb12u6) ...
Selecting previously unselected package python3.11-minimal.
Preparing to unpack .../python3.11-minimal_3.11.2-6+deb12u6_amd64.deb ...
Unpacking python3.11-minimal (3.11.2-6+deb12u6) ...
Setting up libpython3.11-minimal:amd64 (3.11.2-6+deb12u6) ...
Setting up python3.11-minimal (3.11.2-6+deb12u6) ...
Selecting previously unselected package python3-minimal.
(Reading database ... 12779 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.11.2-1+b1_amd64.deb ...
Unpacking python3-minimal (3.11.2-1+b1) ...
Selecting previously unselected package media-types.
Preparing to unpack .../1-media-types_10.0.0_all.deb ...
Unpacking media-types (10.0.0) ...
Selecting previously unselected package libncursesw6:amd64.
Preparing to unpack .../2-libncursesw6_6.4-4_amd64.deb ...
Unpacking libncursesw6:amd64 (6.4-4) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../3-readline-common_8.2-1.3_all.deb ...
Unpacking readline-common (8.2-1.3) ...
Selecting previously unselected package libreadline8:amd64.
Preparing to unpack .../4-libreadline8_8.2-1.3_amd64.deb ...
Unpacking libreadline8:amd64 (8.2-1.3) ...
Selecting previously unselected package libsqlite3-0:amd64.
Preparing to unpack .../5-libsqlite3-0_3.40.1-2+deb12u2_amd64.deb ...
Unpacking libsqlite3-0:amd64 (3.40.1-2+deb12u2) ...
Selecting previously unselected package libpython3.11-stdlib:amd64.
Preparing to unpack .../6-libpython3.11-stdlib_3.11.2-6+deb12u6_amd64.deb ...
Unpacking libpython3.11-stdlib:amd64 (3.11.2-6+deb12u6) ...
Selecting previously unselected package python3.11.
Preparing to unpack .../7-python3.11_3.11.2-6+deb12u6_amd64.deb ...
Unpacking python3.11 (3.11.2-6+deb12u6) ...
Selecting previously unselected package libpython3-stdlib:amd64.
Preparing to unpack .../8-libpython3-stdlib_3.11.2-1+b1_amd64.deb ...
Unpacking libpython3-stdlib:amd64 (3.11.2-1+b1) ...
Setting up python3-minimal (3.11.2-1+b1) ...
Selecting previously unselected package python3.
(Reading database ... 13230 files and directories currently installed.)
Preparing to unpack .../00-python3_3.11.2-1+b1_amd64.deb ...
Unpacking python3 (3.11.2-1+b1) ...
Selecting previously unselected package sgml-base.
Preparing to unpack .../01-sgml-base_1.31_all.deb ...
Unpacking sgml-base (1.31) ...
Selecting previously unselected package tzdata.
Preparing to unpack .../02-tzdata_2025b-0+deb12u2_all.deb ...
Unpacking tzdata (2025b-0+deb12u2) ...
Selecting previously unselected package libproc2-0:amd64.
Preparing to unpack .../03-libproc2-0_2%3a4.0.2-3_amd64.deb ...
Unpacking libproc2-0:amd64 (2:4.0.2-3) ...
Selecting previously unselected package procps.
Preparing to unpack .../04-procps_2%3a4.0.2-3_amd64.deb ...
Unpacking procps (2:4.0.2-3) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../05-sensible-utils_0.0.17+nmu1_all.deb ...
Unpacking sensible-utils (0.0.17+nmu1) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../06-libmagic-mgc_1%3a5.44-3_amd64.deb ...
Unpacking libmagic-mgc (1:5.44-3) ...
Selecting previously unselected package libmagic1:amd64.
Preparing to unpack .../07-libmagic1_1%3a5.44-3_amd64.deb ...
Unpacking libmagic1:amd64 (1:5.44-3) ...
Selecting previously unselected package file.
Preparing to unpack .../08-file_1%3a5.44-3_amd64.deb ...
Unpacking file (1:5.44-3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../09-gettext-base_0.21-12_amd64.deb ...
Unpacking gettext-base (0.21-12) ...
Selecting previously unselected package libuchardet0:amd64.
Preparing to unpack .../10-libuchardet0_0.0.7-1_amd64.deb ...
Unpacking libuchardet0:amd64 (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../11-groff-base_1.22.4-10_amd64.deb ...
Unpacking groff-base (1.22.4-10) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../12-bsdextrautils_2.38.1-5+deb12u3_amd64.deb ...
Unpacking bsdextrautils (2.38.1-5+deb12u3) ...
Selecting previously unselected package libpipeline1:amd64.
Preparing to unpack .../13-libpipeline1_1.5.7-1_amd64.deb ...
Unpacking libpipeline1:amd64 (1.5.7-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../14-man-db_2.11.2-2_amd64.deb ...
Unpacking man-db (2.11.2-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../15-m4_1.4.19-3_amd64.deb ...
Unpacking m4 (1.4.19-3) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../16-autoconf_2.71-3_all.deb ...
Unpacking autoconf (2.71-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../17-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../18-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../19-autopoint_0.21-12_all.deb ...
Unpacking autopoint (0.21-12) ...
Selecting previously unselected package python3-six.
Preparing to unpack .../20-python3-six_1.16.0-4_all.deb ...
Unpacking python3-six (1.16.0-4) ...
Selecting previously unselected package python3-dateutil.
Preparing to unpack .../21-python3-dateutil_2.8.2-2_all.deb ...
Unpacking python3-dateutil (2.8.2-2) ...
Selecting previously unselected package xml-core.
Preparing to unpack .../22-xml-core_0.18+nmu1_all.deb ...
Unpacking xml-core (0.18+nmu1) ...
Selecting previously unselected package docutils-common.
Preparing to unpack .../23-docutils-common_0.19+dfsg-6_all.deb ...
Unpacking docutils-common (0.19+dfsg-6) ...
Selecting previously unselected package python3-roman.
Preparing to unpack .../24-python3-roman_3.3-3_all.deb ...
Unpacking python3-roman (3.3-3) ...
Selecting previously unselected package python3-docutils.
Preparing to unpack .../25-python3-docutils_0.19+dfsg-6_all.deb ...
Unpacking python3-docutils (0.19+dfsg-6) ...
Selecting previously unselected package python3-pkg-resources.
Preparing to unpack .../26-python3-pkg-resources_66.1.1-1+deb12u2_all.deb ...
Unpacking python3-pkg-resources (66.1.1-1+deb12u2) ...
Selecting previously unselected package python3-pyparsing.
Preparing to unpack .../27-python3-pyparsing_3.0.9-1_all.deb ...
Unpacking python3-pyparsing (3.0.9-1) ...
Selecting previously unselected package python3-catkin-pkg.
Preparing to unpack .../28-python3-catkin-pkg_0.5.2-5_all.deb ...
Unpacking python3-catkin-pkg (0.5.2-5) ...
Selecting previously unselected package python3-catkin.
Preparing to unpack .../29-python3-catkin_0.8.10-9_all.deb ...
Unpacking python3-catkin (0.8.10-9) ...
Selecting previously unselected package python3-empy.
Preparing to unpack .../30-python3-empy_3.3.4-2_all.deb ...
Unpacking python3-empy (3.3.4-2) ...
Selecting previously unselected package python3-lib2to3.
Preparing to unpack .../31-python3-lib2to3_3.11.2-3_all.deb ...
Unpacking python3-lib2to3 (3.11.2-3) ...
Selecting previously unselected package python3-distutils.
Preparing to unpack .../32-python3-distutils_3.11.2-3_all.deb ...
Unpacking python3-distutils (3.11.2-3) ...
Selecting previously unselected package python3-setuptools.
Preparing to unpack .../33-python3-setuptools_66.1.1-1+deb12u2_all.deb ...
Unpacking python3-setuptools (66.1.1-1+deb12u2) ...
Selecting previously unselected package libicu72:amd64.
Preparing to unpack .../34-libicu72_72.1-3+deb12u1_amd64.deb ...
Unpacking libicu72:amd64 (72.1-3+deb12u1) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../35-libxml2_2.9.14+dfsg-1.3~deb12u4_amd64.deb ...
Unpacking libxml2:amd64 (2.9.14+dfsg-1.3~deb12u4) ...
Selecting previously unselected package libarchive13:amd64.
Preparing to unpack .../36-libarchive13_3.6.2-1+deb12u3_amd64.deb ...
Unpacking libarchive13:amd64 (3.6.2-1+deb12u3) ...
Selecting previously unselected package libcurl4:amd64.
Preparing to unpack .../37-libcurl4_7.88.1-10+deb12u14_amd64.deb ...
Unpacking libcurl4:amd64 (7.88.1-10+deb12u14) ...
Selecting previously unselected package libjsoncpp25:amd64.
Preparing to unpack .../38-libjsoncpp25_1.9.5-4_amd64.deb ...
Unpacking libjsoncpp25:amd64 (1.9.5-4) ...
Selecting previously unselected package librhash0:amd64.
Preparing to unpack .../39-librhash0_1.4.3-3_amd64.deb ...
Unpacking librhash0:amd64 (1.4.3-3) ...
Selecting previously unselected package libuv1:amd64.
Preparing to unpack .../40-libuv1_1.44.2-1+deb12u1_amd64.deb ...
Unpacking libuv1:amd64 (1.44.2-1+deb12u1) ...
Selecting previously unselected package cmake-data.
Preparing to unpack .../41-cmake-data_3.25.1-1_all.deb ...
Unpacking cmake-data (3.25.1-1) ...
Selecting previously unselected package cmake.
Preparing to unpack .../42-cmake_3.25.1-1_amd64.deb ...
Unpacking cmake (3.25.1-1) ...
Selecting previously unselected package libpkgconf3:amd64.
Preparing to unpack .../43-libpkgconf3_1.8.1-1_amd64.deb ...
Unpacking libpkgconf3:amd64 (1.8.1-1) ...
Selecting previously unselected package pkgconf-bin.
Preparing to unpack .../44-pkgconf-bin_1.8.1-1_amd64.deb ...
Unpacking pkgconf-bin (1.8.1-1) ...
Selecting previously unselected package pkgconf:amd64.
Preparing to unpack .../45-pkgconf_1.8.1-1_amd64.deb ...
Unpacking pkgconf:amd64 (1.8.1-1) ...
Selecting previously unselected package pkg-config:amd64.
Preparing to unpack .../46-pkg-config_1.8.1-1_amd64.deb ...
Unpacking pkg-config:amd64 (1.8.1-1) ...
Selecting previously unselected package cmake-extras.
Preparing to unpack .../47-cmake-extras_1.6-1_all.deb ...
Unpacking cmake-extras (1.6-1) ...
Selecting previously unselected package ros-environment.
Preparing to unpack .../48-ros-environment_1.3.2-2_all.deb ...
Unpacking ros-environment (1.3.2-2) ...
Selecting previously unselected package catkin.
Preparing to unpack .../49-catkin_0.8.10-9_all.deb ...
Unpacking catkin (0.8.10-9) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../50-libdebhelper-perl_13.11.4_all.deb ...
Unpacking libdebhelper-perl (13.11.4) ...
Selecting previously unselected package libtool.
Preparing to unpack .../51-libtool_2.4.7-7~deb12u1_all.deb ...
Unpacking libtool (2.4.7-7~deb12u1) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../52-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../53-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../54-libsub-override-perl_0.09-4_all.deb ...
Unpacking libsub-override-perl (0.09-4) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../55-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../56-dh-strip-nondeterminism_1.13.1-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.13.1-1) ...
Selecting previously unselected package libelf1:amd64.
Preparing to unpack .../57-libelf1_0.188-2.1_amd64.deb ...
Unpacking libelf1:amd64 (0.188-2.1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../58-dwz_0.15-1_amd64.deb ...
Unpacking dwz (0.15-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../59-gettext_0.21-12_amd64.deb ...
Unpacking gettext (0.21-12) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../60-intltool-debian_0.35.0+20060710.6_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.6) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../61-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../62-debhelper_13.11.4_all.deb ...
Unpacking debhelper (13.11.4) ...
Selecting previously unselected package dumb-init.
Preparing to unpack .../63-dumb-init_1.2.5-2_amd64.deb ...
Unpacking dumb-init (1.2.5-2) ...
Selecting previously unselected package libfakeroot:amd64.
Preparing to unpack .../64-libfakeroot_1.31-1.2_amd64.deb ...
Unpacking libfakeroot:amd64 (1.31-1.2) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../65-fakeroot_1.31-1.2_amd64.deb ...
Unpacking fakeroot (1.31-1.2) ...
Selecting previously unselected package googletest.
Preparing to unpack .../66-googletest_1.12.1-0.2_all.deb ...
Unpacking googletest (1.12.1-0.2) ...
Selecting previously unselected package libexpat1-dev:amd64.
Preparing to unpack .../67-libexpat1-dev_2.5.0-1+deb12u2_amd64.deb ...
Unpacking libexpat1-dev:amd64 (2.5.0-1+deb12u2) ...
Selecting previously unselected package libgtest-dev:amd64.
Preparing to unpack .../68-libgtest-dev_1.12.1-0.2_amd64.deb ...
Unpacking libgtest-dev:amd64 (1.12.1-0.2) ...
Selecting previously unselected package libgmock-dev:amd64.
Preparing to unpack .../69-libgmock-dev_1.12.1-0.2_amd64.deb ...
Unpacking libgmock-dev:amd64 (1.12.1-0.2) ...
Selecting previously unselected package libjs-jquery.
Preparing to unpack .../70-libjs-jquery_3.6.1+dfsg+~3.5.14-1_all.deb ...
Unpacking libjs-jquery (3.6.1+dfsg+~3.5.14-1) ...
Selecting previously unselected package libjs-underscore.
Preparing to unpack .../71-libjs-underscore_1.13.4~dfsg+~1.11.4-3_all.deb ...
Unpacking libjs-underscore (1.13.4~dfsg+~1.11.4-3) ...
Selecting previously unselected package libjs-sphinxdoc.
Preparing to unpack .../72-libjs-sphinxdoc_5.3.0-4_all.deb ...
Unpacking libjs-sphinxdoc (5.3.0-4) ...
Selecting previously unselected package libpython3.11:amd64.
Preparing to unpack .../73-libpython3.11_3.11.2-6+deb12u6_amd64.deb ...
Unpacking libpython3.11:amd64 (3.11.2-6+deb12u6) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../74-zlib1g-dev_1%3a1.2.13.dfsg-1_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
Selecting previously unselected package libpython3.11-dev:amd64.
Preparing to unpack .../75-libpython3.11-dev_3.11.2-6+deb12u6_amd64.deb ...
Unpacking libpython3.11-dev:amd64 (3.11.2-6+deb12u6) ...
Selecting previously unselected package libpython3-dev:amd64.
Preparing to unpack .../76-libpython3-dev_3.11.2-1+b1_amd64.deb ...
Unpacking libpython3-dev:amd64 (3.11.2-1+b1) ...
Selecting previously unselected package python3.11-dev.
Preparing to unpack .../77-python3.11-dev_3.11.2-6+deb12u6_amd64.deb ...
Unpacking python3.11-dev (3.11.2-6+deb12u6) ...
Selecting previously unselected package python3-dev.
Preparing to unpack .../78-python3-dev_3.11.2-1+b1_amd64.deb ...
Unpacking python3-dev (3.11.2-1+b1) ...
Selecting previously unselected package unzip.
Preparing to unpack .../79-unzip_6.0-28_amd64.deb ...
Unpacking unzip (6.0-28) ...
Selecting previously unselected package ros-one-convex-decomposition.
Preparing to unpack .../80-ros-one-convex-decomposition_0.1.12-3-gb722eb5-2025.12.06.02.50_amd64.deb ...
Unpacking ros-one-convex-decomposition (0.1.12-3-gb722eb5-2025.12.06.02.50) ...
Selecting previously unselected package ros-one-ivcon.
Preparing to unpack .../81-ros-one-ivcon_0.1.7-2-g5c97b19-2025.12.06.02.51_amd64.deb ...
Unpacking ros-one-ivcon (0.1.7-2-g5c97b19-2025.12.06.02.51) ...
Selecting previously unselected package ros-one-setup-files.
Preparing to unpack .../82-ros-one-setup-files_0-2025.12.06.02.48_amd64.deb ...
Unpacking ros-one-setup-files (0-2025.12.06.02.48) ...
Selecting previously unselected package ros-one-ros-environment.
Preparing to unpack .../83-ros-one-ros-environment_1.3.2-5-g2686e94-2025.12.06.02.48_amd64.deb ...
Unpacking ros-one-ros-environment (1.3.2-5-g2686e94-2025.12.06.02.48) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../84-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up media-types (10.0.0) ...
Setting up dumb-init (1.2.5-2) ...
Setting up libpipeline1:amd64 (1.5.7-1) ...
Setting up libicu72:amd64 (72.1-3+deb12u1) ...
Setting up bsdextrautils (2.38.1-5+deb12u3) ...
Setting up libmagic-mgc (1:5.44-3) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up unzip (6.0-28) ...
Setting up libdebhelper-perl (13.11.4) ...
Setting up libsqlite3-0:amd64 (3.40.1-2+deb12u2) ...
Setting up libmagic1:amd64 (1:5.44-3) ...
Setting up gettext-base (0.21-12) ...
Setting up m4 (1.4.19-3) ...
Setting up file (1:5.44-3) ...
Setting up googletest (1.12.1-0.2) ...
Setting up libfakeroot:amd64 (1.31-1.2) ...
Setting up tzdata (2025b-0+deb12u2) ...

Current default time zone: 'Etc/UTC'
Local time is now:      Sat Dec  6 05:54:21 UTC 2025.
Universal Time is now:  Sat Dec  6 05:54:21 UTC 2025.
Run 'dpkg-reconfigure tzdata' if you wish to change it.

Setting up fakeroot (1.31-1.2) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up ros-one-convex-decomposition (0.1.12-3-gb722eb5-2025.12.06.02.50) ...
Setting up autotools-dev (20220109.1) ...
Setting up libpkgconf3:amd64 (1.8.1-1) ...
Setting up libuv1:amd64 (1.44.2-1+deb12u1) ...
Setting up libexpat1-dev:amd64 (2.5.0-1+deb12u2) ...
Setting up libproc2-0:amd64 (2:4.0.2-3) ...
Setting up autopoint (0.21-12) ...
Setting up libjsoncpp25:amd64 (1.9.5-4) ...
Setting up pkgconf-bin (1.8.1-1) ...
Setting up libncursesw6:amd64 (6.4-4) ...
Setting up autoconf (2.71-3) ...
Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
Setting up sensible-utils (0.0.17+nmu1) ...
Setting up librhash0:amd64 (1.4.3-3) ...
Setting up libuchardet0:amd64 (0.0.7-1) ...
Setting up procps (2:4.0.2-3) ...
Setting up libcurl4:amd64 (7.88.1-10+deb12u14) ...
Setting up libsub-override-perl (0.09-4) ...
Setting up sgml-base (1.31) ...
Setting up cmake-data (3.25.1-1) ...
Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ...
Setting up libelf1:amd64 (0.188-2.1) ...
Setting up readline-common (8.2-1.3) ...
Setting up libxml2:amd64 (2.9.14+dfsg-1.3~deb12u4) ...
Setting up libjs-underscore (1.13.4~dfsg+~1.11.4-3) ...
Setting up ros-one-ivcon (0.1.7-2-g5c97b19-2025.12.06.02.51) ...
Setting up ros-environment (1.3.2-2) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.13.1-1) ...
Setting up gettext (0.21-12) ...
Setting up libgtest-dev:amd64 (1.12.1-0.2) ...
Setting up libtool (2.4.7-7~deb12u1) ...
Setting up libarchive13:amd64 (3.6.2-1+deb12u3) ...
Setting up libreadline8:amd64 (8.2-1.3) ...
Setting up pkgconf:amd64 (1.8.1-1) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up dh-autoreconf (20) ...
Setting up pkg-config:amd64 (1.8.1-1) ...
Setting up libgmock-dev:amd64 (1.12.1-0.2) ...
Setting up libjs-sphinxdoc (5.3.0-4) ...
Setting up dh-strip-nondeterminism (1.13.1-1) ...
Setting up dwz (0.15-1) ...
Setting up groff-base (1.22.4-10) ...
Setting up xml-core (0.18+nmu1) ...
Setting up cmake (3.25.1-1) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libpython3.11-stdlib:amd64 (3.11.2-6+deb12u6) ...
Setting up man-db (2.11.2-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libpython3-stdlib:amd64 (3.11.2-1+b1) ...
Setting up python3.11 (3.11.2-6+deb12u6) ...
Setting up libpython3.11:amd64 (3.11.2-6+deb12u6) ...
Setting up debhelper (13.11.4) ...
Setting up python3 (3.11.2-1+b1) ...
Setting up python3-empy (3.3.4-2) ...
Setting up python3-six (1.16.0-4) ...
Setting up python3-roman (3.3-3) ...
Setting up python3-pyparsing (3.0.9-1) ...
Setting up cmake-extras (1.6-1) ...
Setting up libpython3.11-dev:amd64 (3.11.2-6+deb12u6) ...
Setting up python3-dateutil (2.8.2-2) ...
Setting up python3-lib2to3 (3.11.2-3) ...
Setting up python3-catkin (0.8.10-9) ...
Setting up python3-pkg-resources (66.1.1-1+deb12u2) ...
Setting up python3-distutils (3.11.2-3) ...
Setting up libpython3-dev:amd64 (3.11.2-1+b1) ...
Setting up python3-setuptools (66.1.1-1+deb12u2) ...
Setting up python3.11-dev (3.11.2-6+deb12u6) ...
Setting up python3-dev (3.11.2-1+b1) ...
Setting up ros-one-setup-files (0-2025.12.06.02.48) ...
Setting up ros-one-ros-environment (1.3.2-5-g2686e94-2025.12.06.02.48) ...
Processing triggers for libc-bin (2.36-9+deb12u13) ...
Processing triggers for sgml-base (1.31) ...
Setting up docutils-common (0.19+dfsg-6) ...
Processing triggers for sgml-base (1.31) ...
Setting up python3-docutils (0.19+dfsg-6) ...
Setting up python3-catkin-pkg (0.5.2-5) ...
Setting up catkin (0.8.10-9) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...

+------------------------------------------------------------------------------+
| Check architectures                          Sat, 06 Dec 2025 05:54:24 +0000 |
+------------------------------------------------------------------------------+

Arch check ok (amd64 included in any)

+------------------------------------------------------------------------------+
| Build environment                            Sat, 06 Dec 2025 05:54:30 +0000 |
+------------------------------------------------------------------------------+

Kernel: Linux 6.11.0-1018-azure #18~24.04.1-Ubuntu SMP Sat Jun 28 04:46:03 UTC 2025 amd64 (x86_64)
Toolchain package versions: binutils_2.40-2 dpkg-dev_1.21.22 g++-12_12.2.0-14+deb12u1 gcc-12_12.2.0-14+deb12u1 libc6-dev_2.36-9+deb12u13 libstdc++-12-dev_12.2.0-14+deb12u1 libstdc++6_12.2.0-14+deb12u1 linux-libc-dev_6.1.158-1
Package versions: adduser_3.134 apt_2.6.1 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.21-12 autotools-dev_20220109.1 base-files_12.4+deb12u12 base-passwd_3.6.1 bash_5.2.15-2+b9 binutils_2.40-2 binutils-common_2.40-2 binutils-x86-64-linux-gnu_2.40-2 bsdextrautils_2.38.1-5+deb12u3 bsdutils_1:2.38.1-5+deb12u3 build-essential_12.9 bzip2_1.0.8-5+b1 ca-certificates_20230311+deb12u1 catkin_0.8.10-9 ccache_4.8+really4.7.5-1 cmake_3.25.1-1 cmake-data_3.25.1-1 cmake-extras_1.6-1 coreutils_9.1-1 cpp_4:12.2.0-3 cpp-12_12.2.0-14+deb12u1 dash_0.5.12-2 debconf_1.5.82 debhelper_13.11.4 debian-archive-keyring_2023.3+deb12u2 debianutils_5.7-0.5~deb12u1 dh-autoreconf_20 dh-strip-nondeterminism_1.13.1-1 diffutils_1:3.8-4 docutils-common_0.19+dfsg-6 dpkg_1.21.22 dpkg-dev_1.21.22 dumb-init_1.2.5-2 dwz_0.15-1 fakeroot_1.31-1.2 file_1:5.44-3 findutils_4.9.0-4 g++_4:12.2.0-3 g++-12_12.2.0-14+deb12u1 gcc_4:12.2.0-3 gcc-12_12.2.0-14+deb12u1 gcc-12-base_12.2.0-14+deb12u1 gettext_0.21-12 gettext-base_0.21-12 git_1:2.39.5-0+deb12u2 git-man_1:2.39.5-0+deb12u2 googletest_1.12.1-0.2 gpgv_2.2.40-1.1+deb12u1 grep_3.8-5 groff-base_1.22.4-10 gzip_1.12-1 hostname_3.23+nmu1 init-system-helpers_1.65.2+deb12u1 intltool-debian_0.35.0+20060710.6 libacl1_2.3.1-3 libapt-pkg6.0_2.6.1 libarchive-zip-perl_1.68-1 libarchive13_3.6.2-1+deb12u3 libasan8_12.2.0-14+deb12u1 libatomic1_12.2.0-14+deb12u1 libattr1_1:2.5.1-4 libaudit-common_1:3.0.9-1 libaudit1_1:3.0.9-1 libbinutils_2.40-2 libblkid1_2.38.1-5+deb12u3 libbrotli1_1.0.9-2+b6 libbz2-1.0_1.0.8-5+b1 libc-bin_2.36-9+deb12u13 libc-dev-bin_2.36-9+deb12u13 libc6_2.36-9+deb12u13 libc6-dev_2.36-9+deb12u13 libcap-ng0_0.8.3-1+b3 libcap2_1:2.66-4+deb12u2 libcc1-0_12.2.0-14+deb12u1 libcom-err2_1.47.0-2+b2 libcrypt-dev_1:4.4.33-2 libcrypt1_1:4.4.33-2 libctf-nobfd0_2.40-2 libctf0_2.40-2 libcurl3-gnutls_7.88.1-10+deb12u14 libcurl4_7.88.1-10+deb12u14 libdb5.3_5.3.28+dfsg2-1 libdebconfclient0_0.270 libdebhelper-perl_13.11.4 libdpkg-perl_1.21.22 libelf1_0.188-2.1 liberror-perl_0.17029-2 libexpat1_2.5.0-1+deb12u2 libexpat1-dev_2.5.0-1+deb12u2 libfakeroot_1.31-1.2 libffi8_3.4.4-1 libfile-find-rule-perl_0.34-4~deb12u1 libfile-stripnondeterminism-perl_1.13.1-1 libgcc-12-dev_12.2.0-14+deb12u1 libgcc-s1_12.2.0-14+deb12u1 libgcrypt20_1.10.1-3 libgdbm-compat4_1.23-3 libgdbm6_1.23-3 libgmock-dev_1.12.1-0.2 libgmp10_2:6.2.1+dfsg1-1.1 libgnutls30_3.7.9-2+deb12u5 libgomp1_12.2.0-14+deb12u1 libgpg-error0_1.46-1 libgprofng0_2.40-2 libgssapi-krb5-2_1.20.1-2+deb12u4 libgtest-dev_1.12.1-0.2 libhiredis0.14_0.14.1-3 libhogweed6_3.8.1-2 libicu72_72.1-3+deb12u1 libidn2-0_2.3.3-1+b1 libisl23_0.25-1.1 libitm1_12.2.0-14+deb12u1 libjansson4_2.14-2 libjs-jquery_3.6.1+dfsg+~3.5.14-1 libjs-sphinxdoc_5.3.0-4 libjs-underscore_1.13.4~dfsg+~1.11.4-3 libjsoncpp25_1.9.5-4 libk5crypto3_1.20.1-2+deb12u4 libkeyutils1_1.6.3-2 libkrb5-3_1.20.1-2+deb12u4 libkrb5support0_1.20.1-2+deb12u4 libldap-2.5-0_2.5.13+dfsg-5 liblsan0_12.2.0-14+deb12u1 liblz4-1_1.9.4-1 liblzma5_5.4.1-1 libmagic-mgc_1:5.44-3 libmagic1_1:5.44-3 libmd0_1.0.4-2 libmount1_2.38.1-5+deb12u3 libmpc3_1.3.1-1 libmpfr6_4.2.0-1 libncursesw6_6.4-4 libnettle8_3.8.1-2 libnghttp2-14_1.52.0-1+deb12u2 libnsl-dev_1.3.0-2 libnsl2_1.3.0-2 libnumber-compare-perl_0.03-3 libp11-kit0_0.24.1-2 libpam-modules_1.5.2-6+deb12u1 libpam-modules-bin_1.5.2-6+deb12u1 libpam-runtime_1.5.2-6+deb12u1 libpam0g_1.5.2-6+deb12u1 libpcre2-8-0_10.42-1 libperl5.36_5.36.0-7+deb12u3 libpipeline1_1.5.7-1 libpkgconf3_1.8.1-1 libproc2-0_2:4.0.2-3 libpsl5_0.21.2-1 libpython3-dev_3.11.2-1+b1 libpython3-stdlib_3.11.2-1+b1 libpython3.11_3.11.2-6+deb12u6 libpython3.11-dev_3.11.2-6+deb12u6 libpython3.11-minimal_3.11.2-6+deb12u6 libpython3.11-stdlib_3.11.2-6+deb12u6 libquadmath0_12.2.0-14+deb12u1 libreadline8_8.2-1.3 librhash0_1.4.3-3 librtmp1_2.4+20151223.gitfa8646d.1-2+b2 libsasl2-2_2.1.28+dfsg-10 libsasl2-modules-db_2.1.28+dfsg-10 libseccomp2_2.5.4-1+deb12u1 libselinux1_3.4-1+b6 libsemanage-common_3.4-1 libsemanage2_3.4-1+b5 libsepol2_3.4-2.1 libsmartcols1_2.38.1-5+deb12u3 libsqlite3-0_3.40.1-2+deb12u2 libssh2-1_1.10.0-3+b1 libssl3_3.0.17-1~deb12u3 libstdc++-12-dev_12.2.0-14+deb12u1 libstdc++6_12.2.0-14+deb12u1 libsub-override-perl_0.09-4 libsystemd0_252.39-1~deb12u1 libtasn1-6_4.19.0-2+deb12u1 libtext-glob-perl_0.11-3 libtinfo6_6.4-4 libtirpc-common_1.3.3+ds-1 libtirpc-dev_1.3.3+ds-1 libtirpc3_1.3.3+ds-1 libtool_2.4.7-7~deb12u1 libtsan2_12.2.0-14+deb12u1 libubsan1_12.2.0-14+deb12u1 libuchardet0_0.0.7-1 libudev1_252.39-1~deb12u1 libunistring2_1.0-2 libuuid1_2.38.1-5+deb12u3 libuv1_1.44.2-1+deb12u1 libxml2_2.9.14+dfsg-1.3~deb12u4 libxxhash0_0.8.1-1 libzstd1_1.5.4+dfsg2-5 linux-libc-dev_6.1.158-1 login_1:4.13+dfsg1-1+deb12u1 m4_1.4.19-3 make_4.3-4.1 man-db_2.11.2-2 mawk_1.3.4.20200120-3.1 media-types_10.0.0 ncurses-base_6.4-4 ncurses-bin_6.4-4 openssl_3.0.17-1~deb12u3 passwd_1:4.13+dfsg1-1+deb12u1 patch_2.7.6-7 perl_5.36.0-7+deb12u3 perl-base_5.36.0-7+deb12u3 perl-modules-5.36_5.36.0-7+deb12u3 pkg-config_1.8.1-1 pkgconf_1.8.1-1 pkgconf-bin_1.8.1-1 po-debconf_1.0.21+nmu1 procps_2:4.0.2-3 python3_3.11.2-1+b1 python3-catkin_0.8.10-9 python3-catkin-pkg_0.5.2-5 python3-dateutil_2.8.2-2 python3-dev_3.11.2-1+b1 python3-distutils_3.11.2-3 python3-docutils_0.19+dfsg-6 python3-empy_3.3.4-2 python3-lib2to3_3.11.2-3 python3-minimal_3.11.2-1+b1 python3-pkg-resources_66.1.1-1+deb12u2 python3-pyparsing_3.0.9-1 python3-roman_3.3-3 python3-setuptools_66.1.1-1+deb12u2 python3-six_1.16.0-4 python3.11_3.11.2-6+deb12u6 python3.11-dev_3.11.2-6+deb12u6 python3.11-minimal_3.11.2-6+deb12u6 readline-common_8.2-1.3 ros-environment_1.3.2-2 ros-one-convex-decomposition_0.1.12-3-gb722eb5-2025.12.06.02.50 ros-one-ivcon_0.1.7-2-g5c97b19-2025.12.06.02.51 ros-one-ros-environment_1.3.2-5-g2686e94-2025.12.06.02.48 ros-one-setup-files_0-2025.12.06.02.48 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-1 sensible-utils_0.0.17+nmu1 sgml-base_1.31 sysvinit-utils_3.06-4 tar_1.34+dfsg-1.2+deb12u1 tzdata_2025b-0+deb12u2 unzip_6.0-28 usrmerge_37~deb12u1 util-linux_2.38.1-5+deb12u3 util-linux-extra_2.38.1-5+deb12u3 xml-core_0.18+nmu1 xz-utils_5.4.1-1 zlib1g_1:1.2.13.dfsg-1 zlib1g-dev_1:1.2.13.dfsg-1

+------------------------------------------------------------------------------+
| Build                                        Sat, 06 Dec 2025 05:54:30 +0000 |
+------------------------------------------------------------------------------+


Unpack source
-------------

Format: 1.0
Source: ros-one-pr2-description
Binary: ros-one-pr2-description
Architecture: any
Version: 1.13.1-2-g9a8e4fb-2025.12.06.05.52
Maintainer: ROS Orphaned Package Maintainers <ros-orphaned-packages@googlegroups.com>
Homepage: http://ros.org/wiki/pr2_description
Standards-Version: 3.9.2
Build-Depends: debhelper (>= 9.0.0), catkin, libgmock-dev, libgtest-dev, liburdfdom-dev <!nocheck>, ros-one-convex-decomposition, ros-one-ivcon, ros-one-rosbash <!nocheck>
Package-List:
 ros-one-pr2-description deb misc optional arch=any
Checksums-Sha1:
 ec359a2fee6f685048866e5bec1f2e1886b9af46 22486957 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52.tar.gz
Checksums-Sha256:
 24cd1b88c812dec6a9788b58b4f32864f025b68c9f7e572cbb4f3aff5bddeb6e 22486957 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52.tar.gz
Files:
 f156476fbc1cc67dae738ea30420345f 22486957 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52.tar.gz

dpkg-source: warning: extracting unsigned source package (ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52.dsc)
dpkg-source: info: extracting ros-one-pr2-description in /<<BUILDDIR>>package
dpkg-source: info: unpacking ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52.tar.gz

Check disk space
----------------

Sufficient free space for build

User Environment
----------------

APT_CONFIG=/var/lib/sbuild/apt.conf
CCACHE_DIR=/build/ccache
DEB_BUILD_OPTIONS=nocheck
HOME=/sbuild-nonexistent
LANG=C.UTF-8
LC_ALL=C.UTF-8
LD_LIBRARY_PATH=/opt/ros/one/lib:/opt/ros/one/lib/x86_64-linux-gnu
LOGNAME=runner
OLDPWD=/
PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/<<BUILDDIR>>package
SHELL=/bin/sh
USER=runner

dpkg-buildpackage
-----------------

Command: dpkg-buildpackage --sanitize-env -Pnocheck -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package ros-one-pr2-description
dpkg-buildpackage: info: source version 1.13.1-2-g9a8e4fb-2025.12.06.05.52
dpkg-buildpackage: info: source distribution bookworm
dpkg-buildpackage: info: source changed by ROS Orphaned Package Maintainers <ros-orphaned-packages@googlegroups.com>
 dpkg-source --before-build .
dpkg-buildpackage: info: host architecture amd64
dpkg-source: info: using options from package/debian/source/options: --auto-commit
 fakeroot debian/rules clean
dh clean -v --buildsystem=cmake --builddirectory=.obj-x86_64-linux-gnu
   dh_auto_clean -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_autoreconf_clean -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_clean -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	rm -f debian/debhelper-build-stamp
	rm -rf debian/.debhelper/
	rm -f -- debian/ros-one-pr2-description.substvars debian/files
	rm -fr -- debian/ros-one-pr2-description/ debian/tmp/
	find .  \( \( \
		\( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o -type f -a \
	        \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \
		 -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \
		 -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \
		 -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \
		\) -exec rm -f {} + \) -o \
		\( -type d -a -name autom4te.cache -prune -exec rm -rf {} + \) \)
 debian/rules build
dh build -v --buildsystem=cmake --builddirectory=.obj-x86_64-linux-gnu
   dh_update_autotools_config -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_autoreconf -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   debian/rules override_dh_auto_configure
make[1]: Entering directory '/<<BUILDDIR>>package'
# In case we're installing to a non-standard location, look for a setup.sh
# in the install tree that was dropped by catkin, and source it.  It will
# set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH.
if [ -f "/opt/ros/one/setup.sh" ]; then . "/opt/ros/one/setup.sh"; fi && \
dh_auto_configure -- \
	-DFETCHCONTENT_FULLY_DISCONNECTED=OFF \
	-DCATKIN_BUILD_BINARY_PACKAGE="1" \
	-DCMAKE_INSTALL_PREFIX="/opt/ros/one" \
	-DCMAKE_PREFIX_PATH="/opt/ros/one" \
	-DBUILD_TESTING=OFF -DCATKIN_ENABLE_TESTING=OFF
	cd .obj-x86_64-linux-gnu && cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON -DFETCHCONTENT_FULLY_DISCONNECTED=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_LIBDIR=lib/x86_64-linux-gnu -DFETCHCONTENT_FULLY_DISCONNECTED=OFF -DCATKIN_BUILD_BINARY_PACKAGE=1 -DCMAKE_INSTALL_PREFIX=/opt/ros/one -DCMAKE_PREFIX_PATH=/opt/ros/one -DBUILD_TESTING=OFF -DCATKIN_ENABLE_TESTING=OFF ..
CMake Deprecation Warning at CMakeLists.txt:2 (cmake_minimum_required):
  Compatibility with CMake < 2.8.12 will be removed from a future version of
  CMake.

  Update the VERSION argument <min> value or use a ...<max> suffix to tell
  CMake that the project does not need compatibility with older versions.


-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/lib/ccache/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/lib/ccache/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Using CATKIN_DEVEL_PREFIX: /<<BUILDDIR>>package/.obj-x86_64-linux-gnu/devel
-- Using CMAKE_PREFIX_PATH: /opt/ros/one
-- This workspace overlays: /opt/ros/one
-- Found PythonInterp: /usr/bin/python3 (found suitable version "3.11.2", minimum required is "3") 
-- Using PYTHON_EXECUTABLE: /usr/bin/python3
-- Using Debian Python package layout
-- Using empy: /usr/bin/empy
-- Using CATKIN_ENABLE_TESTING: OFF
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE  
-- catkin 0.8.10
-- BUILD_SHARED_LIBS is on
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_TESTING
    CMAKE_EXPORT_NO_PACKAGE_REGISTRY
    CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY
    CMAKE_INSTALL_LIBDIR
    CMAKE_INSTALL_LOCALSTATEDIR
    CMAKE_INSTALL_RUNSTATEDIR
    CMAKE_INSTALL_SYSCONFDIR
    FETCHCONTENT_FULLY_DISCONNECTED


-- Build files have been written to: /<<BUILDDIR>>package/.obj-x86_64-linux-gnu
make[1]: Leaving directory '/<<BUILDDIR>>package'
	rm -f debian/ros-one-pr2-description.debhelper.log
   debian/rules override_dh_auto_build
make[1]: Entering directory '/<<BUILDDIR>>package'
# In case we're installing to a non-standard location, look for a setup.sh
# in the install tree that was dropped by catkin, and source it.  It will
# set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH.
if [ -f "/opt/ros/one/setup.sh" ]; then . "/opt/ros/one/setup.sh"; fi && \
dh_auto_build
	cd .obj-x86_64-linux-gnu && make -j4 "INSTALL=install --strip-program=true" VERBOSE=1
make[2]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
/usr/bin/cmake -S/<<BUILDDIR>>package -B/<<BUILDDIR>>package/.obj-x86_64-linux-gnu --check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start /<<BUILDDIR>>package/.obj-x86_64-linux-gnu/CMakeFiles /<<BUILDDIR>>package/.obj-x86_64-linux-gnu//CMakeFiles/progress.marks
make  -f CMakeFiles/Makefile2 all
make[3]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
make  -f CMakeFiles/media_files.dir/build.make CMakeFiles/media_files.dir/depend
make[4]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
cd /<<BUILDDIR>>package/.obj-x86_64-linux-gnu && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /<<BUILDDIR>>package /<<BUILDDIR>>package /<<BUILDDIR>>package/.obj-x86_64-linux-gnu /<<BUILDDIR>>package/.obj-x86_64-linux-gnu /<<BUILDDIR>>package/.obj-x86_64-linux-gnu/CMakeFiles/media_files.dir/DependInfo.cmake --color=
make[4]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
make  -f CMakeFiles/media_files.dir/build.make CMakeFiles/media_files.dir/build
make[4]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
[  1%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base.obj
[  1%] Generating /<<BUILDDIR>>package/meshes/base_v0/iv/base.iv
[  1%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_L.obj
[  1%] Generating /<<BUILDDIR>>package/meshes/base_v0/iv/base_L.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/base.stl /<<BUILDDIR>>package/meshes/base_v0/iv/base.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/base.stl /<<BUILDDIR>>package/meshes/base_v0/convex/base.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/base_L.stl /<<BUILDDIR>>package/meshes/base_v0/convex/base_L.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/base_L.stl /<<BUILDDIR>>package/meshes/base_v0/iv/base_L.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   4884
  Colors                     0
  Comments                   0
  Duplicate points           238
  Faces                      96
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     50
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 288 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000849
  Maximum face area is 0.201443

FACE_NULL_DELETE
  There are a total of 96 faces.
  Of these, 96 passed the order test.

VERTEX_NORMAL_SET: Recomputed 288 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.334121 -0.105931 0.334121 0.668242
Y  -0.334121 -0.000000 0.334121 0.668242
Z  0.000000 0.270401 0.656175 0.656175

OBJ_WRITE - Wrote 442 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   4884
  Colors                     0
  Comments                   0
  Duplicate points           238
  Faces                      96
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     50
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 288 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000849
  Maximum face area is 0.201443

FACE_NULL_DELETE
  There are a total of 96 faces.
  Of these, 96 passed the order test.

VERTEX_NORMAL_SET: Recomputed 288 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.334121 -0.105931 0.334121 0.668242
Y  -0.334121 -0.000000 0.334121 0.668242
Z  0.000000 0.270401 0.656175 0.656175

IV_WRITE - Wrote 836 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   58284
  Colors                     0
  Comments                   0
  Duplicate points           2903
  Faces                      1164
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     589
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3492 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000007
  Maximum face area is 0.067218

FACE_NULL_DELETE
  There are a total of 1164 faces.
  Of these, 1164 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3492 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.335681 -0.027665 0.333731 0.669412
Y  -0.333375 0.002917 0.333375 0.666750
Z  -0.000002 0.223555 0.656186 0.656188

IV_WRITE - Wrote 9390 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   58284
  Colors                     0
  Comments                   0
  Duplicate points           2903
  Faces                      1164
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     589
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3492 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000007
  Maximum face area is 0.067218

FACE_NULL_DELETE
  There are a total of 1164 faces.
  Of these, 1164 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3492 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.335681 -0.027665 0.333731 0.669412
Y  -0.333375 0.002917 0.333375 0.666750
Z  -0.000002 0.223555 0.656186 0.656188

OBJ_WRITE - Wrote 5253 text lines.
[  2%] Generating /<<BUILDDIR>>package/meshes/base_v0/iv/caster.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/caster.stl /<<BUILDDIR>>package/meshes/base_v0/iv/caster.iv
[  3%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/caster_L.stl /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L.obj
[  3%] Generating /<<BUILDDIR>>package/meshes/base_v0/iv/caster_L.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/caster_L.stl /<<BUILDDIR>>package/meshes/base_v0/iv/caster_L.iv
[  3%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/caster.stl /<<BUILDDIR>>package/meshes/base_v0/convex/caster.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   9484
  Colors                     0
  Comments                   0
  Duplicate points           468
  Faces                      188
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     96
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 564 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000008
  Maximum face area is 0.013393

FACE_NULL_DELETE
  There are a total of 188 faces.
  Of these, 188 passed the order test.

VERTEX_NORMAL_SET: Recomputed 564 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.100000 -0.009139 0.100000 0.200000
Y  -0.086552 -0.000298 0.086552 0.173104
Z  -0.031770 0.108604 0.167750 0.199520

OBJ_WRITE - Wrote 856 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   50084
  Colors                     0
  Comments                   0
  Duplicate points           2498
  Faces                      1000
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     502
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3000 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.008439

FACE_NULL_DELETE
  There are a total of 1000 faces.
  Of these, 1000 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3000 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.093286 -0.006268 0.093551 0.186837
Y  -0.086500 0.000898 0.086501 0.173001
Z  -0.031771 0.100757 0.167750 0.199521

IV_WRITE - Wrote 8068 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   9484
  Colors                     0
  Comments                   0
  Duplicate points           468
  Faces                      188
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     96
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 564 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000008
  Maximum face area is 0.013393

FACE_NULL_DELETE
  There are a total of 188 faces.
  Of these, 188 passed the order test.

VERTEX_NORMAL_SET: Recomputed 564 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.100000 -0.009139 0.100000 0.200000
Y  -0.086552 -0.000298 0.086552 0.173104
Z  -0.031770 0.108604 0.167750 0.199520

IV_WRITE - Wrote 1572 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   50084
  Colors                     0
  Comments                   0
  Duplicate points           2498
  Faces                      1000
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     502
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3000 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.008439

FACE_NULL_DELETE
  There are a total of 1000 faces.
  Of these, 1000 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3000 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.093286 -0.006268 0.093551 0.186837
Y  -0.086500 0.000898 0.086501 0.173001
Z  -0.031771 0.100757 0.167750 0.199521

OBJ_WRITE - Wrote 4510 text lines.
[  3%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/pr2_wheel.stl /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel.obj
[  3%] Generating /<<BUILDDIR>>package/meshes/base_v0/iv/pr2_wheel.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/pr2_wheel.stl /<<BUILDDIR>>package/meshes/base_v0/iv/pr2_wheel.iv
[  4%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/wheel.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/wheel.stl /<<BUILDDIR>>package/meshes/base_v0/convex/wheel.obj
[  5%] Generating /<<BUILDDIR>>package/meshes/base_v0/iv/wheel.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/wheel.stl /<<BUILDDIR>>package/meshes/base_v0/iv/wheel.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 2
  Text bytes (binary data)   69084
  Colors                     0
  Comments                   0
  Duplicate points           3450
  Faces                      1380
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     690
  Objects                    1

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 4140 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000116

FACE_NULL_DELETE
  There are a total of 1380 faces.
  Of these, 1380 passed the order test.

VERTEX_NORMAL_SET: Recomputed 4140 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.079000 0.000000 0.079000 0.158000
Y  -0.016892 -0.000000 0.016892 0.033783
Z  -0.078196 -0.000000 0.078196 0.156392

OBJ_WRITE - Wrote 6218 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 2
  Text bytes (binary data)   69084
  Colors                     0
  Comments                   0
  Duplicate points           3450
  Faces                      1380
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     690
  Objects                    1

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 4140 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000116

FACE_NULL_DELETE
  There are a total of 1380 faces.
  Of these, 1380 passed the order test.

VERTEX_NORMAL_SET: Recomputed 4140 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.079000 0.000000 0.079000 0.158000
Y  -0.016892 -0.000000 0.016892 0.033783
Z  -0.078196 -0.000000 0.078196 0.156392

IV_WRITE - Wrote 11104 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   50084
  Colors                     0
  Comments                   0
  Duplicate points           2500
  Faces                      1000
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     500
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3000 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.000758

FACE_NULL_DELETE
  There are a total of 1000 faces.
  Of these, 1000 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3000 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.079214 -0.000353 0.079214 0.158427
Y  -0.032059 -0.002820 0.019540 0.051599
Z  -0.079214 -0.000305 0.079214 0.158427

OBJ_WRITE - Wrote 4508 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   50084
  Colors                     0
  Comments                   0
  Duplicate points           2500
  Faces                      1000
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     500
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3000 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.000758

FACE_NULL_DELETE
  There are a total of 1000 faces.
  Of these, 1000 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3000 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.079214 -0.000353 0.079214 0.158427
Y  -0.032059 -0.002820 0.019540 0.051599
Z  -0.079214 -0.000305 0.079214 0.158427

IV_WRITE - Wrote 8064 text lines;
[  6%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/iv/forearm.iv
[  6%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/forearm.stl /<<BUILDDIR>>package/meshes/forearm_v0/iv/forearm.iv
[  6%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/forearm.stl /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/wrist_flex.stl /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex.obj
[  6%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/iv/wrist_flex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/wrist_flex.stl /<<BUILDDIR>>package/meshes/forearm_v0/iv/wrist_flex.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   17084
  Colors                     0
  Comments                   0
  Duplicate points           848
  Faces                      340
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     172
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 1020 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000006
  Maximum face area is 0.002517

FACE_NULL_DELETE
  There are a total of 340 faces.
  Of these, 340 passed the order test.

VERTEX_NORMAL_SET: Recomputed 1020 face vertex normals.

FACE_NORMAL_AVE: Recomputed 340 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.094543 0.216231 0.357172 0.262629
Y  -0.059605 0.001031 0.059988 0.119593
Z  -0.053913 0.002492 0.065888 0.119801

OBJ_WRITE - Wrote 1540 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   17084
  Colors                     0
  Comments                   0
  Duplicate points           848
  Faces                      340
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     172
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 1020 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000006
  Maximum face area is 0.002517

FACE_NULL_DELETE
  There are a total of 340 faces.
  Of these, 340 passed the order test.

VERTEX_NORMAL_SET: Recomputed 1020 face vertex normals.

FACE_NORMAL_AVE: Recomputed 340 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.094543 0.216231 0.357172 0.262629
Y  -0.059605 0.001031 0.059988 0.119593
Z  -0.053913 0.002492 0.065888 0.119801

IV_WRITE - Wrote 2788 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   4934
  Colors                     0
  Comments                   0
  Duplicate points           236
  Faces                      97
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     55
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 291 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.001073

FACE_NULL_DELETE
  There are a total of 97 faces.
  Of these, 97 passed the order test.

VERTEX_NORMAL_SET: Recomputed 291 face vertex normals.

FACE_NORMAL_AVE: Recomputed 97 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.037009 -0.011784 0.027544 0.064553
Y  -0.021329 -0.000412 0.021242 0.042571
Z  -0.040505 -0.001017 0.037421 0.077926

OBJ_WRITE - Wrote 451 text lines.
[  7%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L.obj
[  7%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/iv/wrist_roll.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   4934
  Colors                     0
  Comments                   0
  Duplicate points           236
  Faces                      97
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     55
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 291 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.001073

FACE_NULL_DELETE
  There are a total of 97 faces.
  Of these, 97 passed the order test.

VERTEX_NORMAL_SET: Recomputed 291 face vertex normals.

FACE_NORMAL_AVE: Recomputed 97 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.037009 -0.011784 0.027544 0.064553
Y  -0.021329 -0.000412 0.021242 0.042571
Z  -0.040505 -0.001017 0.037421 0.077926

IV_WRITE - Wrote 853 text lines;
[  8%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/wrist_roll.stl /<<BUILDDIR>>package/meshes/forearm_v0/iv/wrist_roll.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/wrist_roll.stl /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/wrist_roll_L.stl /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L.obj
[  8%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/iv/wrist_roll_L.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/wrist_roll_L.stl /<<BUILDDIR>>package/meshes/forearm_v0/iv/wrist_roll_L.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   7584
  Colors                     0
  Comments                   0
  Duplicate points           373
  Faces                      150
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     77
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 450 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.000333

FACE_NULL_DELETE
  There are a total of 150 faces.
  Of these, 150 passed the order test.

VERTEX_NORMAL_SET: Recomputed 450 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.031545 0.041700 0.016900
Y  -0.018900 -0.000649 0.018900 0.037800
Z  -0.019080 -0.000191 0.018894 0.037974

OBJ_WRITE - Wrote 685 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   49984
  Colors                     0
  Comments                   0
  Duplicate points           2494
  Faces                      998
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     500
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2994 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000072

FACE_NULL_DELETE
  There are a total of 998 faces.
  Of these, 998 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2994 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.031728 0.041700 0.016900
Y  -0.018907 0.000242 0.018900 0.037807
Z  -0.018900 -0.001108 0.018900 0.037800

IV_WRITE - Wrote 8050 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   49984
  Colors                     0
  Comments                   0
  Duplicate points           2494
  Faces                      998
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     500
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2994 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000072

FACE_NULL_DELETE
  There are a total of 998 faces.
  Of these, 998 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2994 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.031728 0.041700 0.016900
Y  -0.018907 0.000242 0.018900 0.037807
Z  -0.018900 -0.001108 0.018900 0.037800

OBJ_WRITE - Wrote 4500 text lines.
[  9%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/finger_tip_l.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   7584
  Colors                     0
  Comments                   0
  Duplicate points           373
  Faces                      150
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     77
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 450 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.000333

FACE_NULL_DELETE
  There are a total of 150 faces.
  Of these, 150 passed the order test.

VERTEX_NORMAL_SET: Recomputed 450 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.031545 0.041700 0.016900
Y  -0.018900 -0.000649 0.018900 0.037800
Z  -0.019080 -0.000191 0.018894 0.037974

IV_WRITE - Wrote 1268 text lines;
[  9%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/finger_tip_l.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/finger_tip_l.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/finger_tip_l.iv
[ 10%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/finger_tip_pad2_l.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l.obj
[ 10%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/finger_tip_pad2_l.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/finger_tip_pad2_l.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/finger_tip_pad2_l.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   44484
  Colors                     0
  Comments                   0
  Duplicate points           2220
  Faces                      888
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     444
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2664 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000412
  Marked 22 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 888 faces.
  Of these, 866 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2598 face vertex normals.

FACE_NORMAL_AVE: Recomputed 866 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.009527 0.031250 0.056680
Y  -0.014948 -0.005707 0.028403 0.043351
Z  -0.011504 0.000005 0.011498 0.023002

OBJ_WRITE - Wrote 3916 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   44484
  Colors                     0
  Comments                   0
  Duplicate points           2220
  Faces                      888
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     444
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2664 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000412
  Marked 22 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 888 faces.
  Of these, 866 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2598 face vertex normals.

FACE_NORMAL_AVE: Recomputed 866 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.009527 0.031250 0.056680
Y  -0.014948 -0.005707 0.028403 0.043351
Z  -0.011504 0.000005 0.011498 0.023002

IV_WRITE - Wrote 7014 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   6984
  Colors                     0
  Comments                   0
  Duplicate points           341
  Faces                      138
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     73
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 414 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000252

FACE_NULL_DELETE
  There are a total of 138 faces.
  Of these, 138 passed the order test.

VERTEX_NORMAL_SET: Recomputed 414 face vertex normals.

FACE_NORMAL_AVE: Recomputed 138 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.013555 0.031250 0.036000
Y  -0.014948 -0.013290 -0.011909 0.003039
Z  -0.011504 0.000115 0.011496 0.023000

OBJ_WRITE - Wrote 633 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   6984
  Colors                     0
  Comments                   0
  Duplicate points           341
  Faces                      138
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     73
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 414 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000252

FACE_NULL_DELETE
  There are a total of 138 faces.
  Of these, 138 passed the order test.

VERTEX_NORMAL_SET: Recomputed 414 face vertex normals.

FACE_NORMAL_AVE: Recomputed 138 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.013555 0.031250 0.036000
Y  -0.014948 -0.013290 -0.011909 0.003039
Z  -0.011504 0.000115 0.011496 0.023000

IV_WRITE - Wrote 1176 text lines;
[ 11%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/finger_tip_pad2_r.iv
[ 11%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/finger_tip_pad2_r.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/finger_tip_pad2_r.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/finger_tip_r.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r.obj
[ 12%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/finger_tip_pad2_r.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r.obj
[ 12%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/finger_tip_r.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/finger_tip_r.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/finger_tip_r.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   6984
  Colors                     0
  Comments                   0
  Duplicate points           341
  Faces                      138
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     73
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 414 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000272

FACE_NULL_DELETE
  There are a total of 138 faces.
  Of these, 138 passed the order test.

VERTEX_NORMAL_SET: Recomputed 414 face vertex normals.

FACE_NORMAL_AVE: Recomputed 138 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.013555 0.031250 0.036000
Y  0.011909 0.013290 0.014945 0.003036
Z  -0.011500 -0.000119 0.011500 0.023000

IV_WRITE - Wrote 1176 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 2
  Text bytes (binary data)   44484
  Colors                     0
  Comments                   0
  Duplicate points           2220
  Faces                      888
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     444
  Objects                    1

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2664 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000412
  Marked 22 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 888 faces.
  Of these, 866 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2598 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.009527 0.031250 0.056680
Y  -0.028400 0.005707 0.014945 0.043346
Z  -0.011500 -0.000007 0.011500 0.023000

OBJ_WRITE - Wrote 3916 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   6984
  Colors                     0
  Comments                   0
  Duplicate points           341
  Faces                      138
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     73
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 414 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000272

FACE_NULL_DELETE
  There are a total of 138 faces.
  Of these, 138 passed the order test.

VERTEX_NORMAL_SET: Recomputed 414 face vertex normals.

FACE_NORMAL_AVE: Recomputed 138 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.013555 0.031250 0.036000
Y  0.011909 0.013290 0.014945 0.003036
Z  -0.011500 -0.000119 0.011500 0.023000

OBJ_WRITE - Wrote 633 text lines.
[ 12%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm.obj
[ 13%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/gripper_palm.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/gripper_palm.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/gripper_palm.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/gripper_palm.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 2
  Text bytes (binary data)   44484
  Colors                     0
  Comments                   0
  Duplicate points           2220
  Faces                      888
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     444
  Objects                    1

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2664 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000412
  Marked 22 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 888 faces.
  Of these, 866 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2598 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.009527 0.031250 0.056680
Y  -0.028400 0.005707 0.014945 0.043346
Z  -0.011500 -0.000007 0.011500 0.023000

IV_WRITE - Wrote 7014 text lines;
[ 13%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/l_finger.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   8584
  Colors                     0
  Comments                   0
  Duplicate points           423
  Faces                      170
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     87
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 510 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000007
  Maximum face area is 0.001591

FACE_NULL_DELETE
  There are a total of 170 faces.
  Of these, 170 passed the order test.

VERTEX_NORMAL_SET: Recomputed 510 face vertex normals.

FACE_NORMAL_AVE: Recomputed 170 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.029447 0.083042 0.125400 0.095953
Y  -0.050265 0.000562 0.050643 0.100908
Z  -0.024235 0.000598 0.024245 0.048479

OBJ_WRITE - Wrote 775 text lines.
[ 13%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/l_finger.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/l_finger.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/l_finger.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   8584
  Colors                     0
  Comments                   0
  Duplicate points           423
  Faces                      170
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     87
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 510 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000007
  Maximum face area is 0.001591

FACE_NULL_DELETE
  There are a total of 170 faces.
  Of these, 170 passed the order test.

VERTEX_NORMAL_SET: Recomputed 510 face vertex normals.

FACE_NORMAL_AVE: Recomputed 170 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.029447 0.083042 0.125400 0.095953
Y  -0.050265 0.000562 0.050643 0.100908
Z  -0.024235 0.000598 0.024245 0.048479

IV_WRITE - Wrote 1428 text lines;
[ 13%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/l_finger_tip.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   10734
  Colors                     0
  Comments                   0
  Duplicate points           514
  Faces                      213
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     125
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 639 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.001318
  Marked 3 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 213 faces.
  Of these, 210 passed the order test.

VERTEX_NORMAL_SET: Recomputed 630 face vertex normals.

FACE_NORMAL_AVE: Recomputed 210 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008937 0.050530 0.095119 0.104056
Y  -0.008756 0.011692 0.045605 0.054361
Z  -0.027598 0.000403 0.027502 0.055100

OBJ_WRITE - Wrote 973 text lines.
[ 14%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/l_finger_tip.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/l_finger_tip.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/l_finger_tip.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   10734
  Colors                     0
  Comments                   0
  Duplicate points           514
  Faces                      213
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     125
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 639 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.001318
  Marked 3 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 213 faces.
  Of these, 210 passed the order test.

VERTEX_NORMAL_SET: Recomputed 630 face vertex normals.

FACE_NORMAL_AVE: Recomputed 210 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008937 0.050530 0.095119 0.104056
Y  -0.008756 0.011692 0.045605 0.054361
Z  -0.027598 0.000403 0.027502 0.055100

IV_WRITE - Wrote 1784 text lines;
[ 15%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/l_floating.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   7534
  Colors                     0
  Comments                   0
  Duplicate points           370
  Faces                      149
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     77
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 447 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.000267

FACE_NULL_DELETE
  There are a total of 149 faces.
  Of these, 149 passed the order test.

VERTEX_NORMAL_SET: Recomputed 447 face vertex normals.

FACE_NORMAL_AVE: Recomputed 149 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025956 0.002166 0.031007 0.056963
Y  -0.015821 0.004342 0.028854 0.044675
Z  -0.011198 0.000094 0.011239 0.022438

OBJ_WRITE - Wrote 681 text lines.
[ 15%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/l_floating.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/l_floating.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/l_floating.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   7534
  Colors                     0
  Comments                   0
  Duplicate points           370
  Faces                      149
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     77
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 447 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.000267

FACE_NULL_DELETE
  There are a total of 149 faces.
  Of these, 149 passed the order test.

VERTEX_NORMAL_SET: Recomputed 447 face vertex normals.

FACE_NORMAL_AVE: Recomputed 149 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025956 0.002166 0.031007 0.056963
Y  -0.015821 0.004342 0.028854 0.044675
Z  -0.011198 0.000094 0.011239 0.022438

IV_WRITE - Wrote 1261 text lines;
[ 16%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/upper_finger_l.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   48584
  Colors                     0
  Comments                   0
  Duplicate points           2412
  Faces                      970
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     498
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2910 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000213

FACE_NULL_DELETE
  There are a total of 970 faces.
  Of these, 970 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2910 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.002751 0.017795 0.045673 0.048424
Y  -0.006114 0.001520 0.016773 0.022887
Z  -0.015500 -0.000211 0.015500 0.031000

OBJ_WRITE - Wrote 4386 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   48584
  Colors                     0
  Comments                   0
  Duplicate points           2412
  Faces                      970
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     498
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2910 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000213

FACE_NULL_DELETE
  There are a total of 970 faces.
  Of these, 970 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2910 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.002751 0.017795 0.045673 0.048424
Y  -0.006114 0.001520 0.016773 0.022887
Z  -0.015500 -0.000211 0.015500 0.031000

IV_WRITE - Wrote 7850 text lines;
[ 16%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/upper_finger_l.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/upper_finger_l.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/upper_finger_l.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   11084
  Colors                     0
  Comments                   0
  Duplicate points           546
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     114
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.001407

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.009252 0.051350 0.095311 0.104564
Y  -0.008993 0.012438 0.045732 0.054724
Z  -0.027750 -0.000000 0.027750 0.055500

OBJ_WRITE - Wrote 1002 text lines.
[ 17%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/upper_finger_r.stl /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r.obj
[ 18%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan.obj
[ 18%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/iv/upper_finger_r.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/head_pan.stl /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/upper_finger_r.stl /<<BUILDDIR>>package/meshes/gripper_v0/iv/upper_finger_r.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   11084
  Colors                     0
  Comments                   0
  Duplicate points           546
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     114
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.001407

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.009252 0.051350 0.095311 0.104564
Y  -0.008993 0.012438 0.045732 0.054724
Z  -0.027750 -0.000000 0.027750 0.055500

IV_WRITE - Wrote 1832 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   11084
  Colors                     0
  Comments                   0
  Duplicate points           546
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     114
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.001407

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.009251 0.051359 0.095313 0.104564
Y  -0.045732 -0.012424 0.008995 0.054728
Z  -0.027751 0.000001 0.027755 0.055506

OBJ_WRITE - Wrote 1002 text lines.
[ 19%] Generating /<<BUILDDIR>>package/meshes/head_v0/iv/head_pan.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   50084
  Colors                     0
  Comments                   0
  Duplicate points           2494
  Faces                      1000
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     506
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3000 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000006
  Maximum face area is 0.012701

FACE_NULL_DELETE
  There are a total of 1000 faces.
  Of these, 1000 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3000 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.110514 0.040053 0.143151 0.253665
Y  -0.160608 0.000594 0.160608 0.321217
Z  -0.065348 -0.007659 0.076844 0.142191

OBJ_WRITE - Wrote 4514 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/head_pan.stl /<<BUILDDIR>>package/meshes/head_v0/iv/head_pan.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   11084
  Colors                     0
  Comments                   0
  Duplicate points           546
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     114
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.001407

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.009251 0.051359 0.095313 0.104564
Y  -0.045732 -0.012424 0.008995 0.054728
Z  -0.027751 0.000001 0.027755 0.055506

IV_WRITE - Wrote 1832 text lines;
[ 20%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/head_pan_L.stl /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L.obj
[ 20%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt.obj
[ 20%] Generating /<<BUILDDIR>>package/meshes/head_v0/iv/head_pan_L.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/head_pan_L.stl /<<BUILDDIR>>package/meshes/head_v0/iv/head_pan_L.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/head_tilt.stl /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   50084
  Colors                     0
  Comments                   0
  Duplicate points           2494
  Faces                      1000
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     506
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3000 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000006
  Maximum face area is 0.012701

FACE_NULL_DELETE
  There are a total of 1000 faces.
  Of these, 1000 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3000 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.110514 0.040053 0.143151 0.253665
Y  -0.160608 0.000594 0.160608 0.321217
Z  -0.065348 -0.007659 0.076844 0.142191

IV_WRITE - Wrote 8076 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   11084
  Colors                     0
  Comments                   0
  Duplicate points           548
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     112
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.013457

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.112988 0.047474 0.144703 0.257691
Y  -0.159889 0.009056 0.161403 0.321292
Z  -0.065861 -0.025391 0.079373 0.145234

OBJ_WRITE - Wrote 1000 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   11084
  Colors                     0
  Comments                   0
  Duplicate points           548
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     112
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.013457

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.112988 0.047474 0.144703 0.257691
Y  -0.159889 0.009056 0.161403 0.321292
Z  -0.065861 -0.025391 0.079373 0.145234

IV_WRITE - Wrote 1828 text lines;
[ 21%] Generating /<<BUILDDIR>>package/meshes/head_v0/iv/head_tilt.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/head_tilt.stl /<<BUILDDIR>>package/meshes/head_v0/iv/head_tilt.iv
[ 22%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/head_tilt_L.stl /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   52684
  Colors                     0
  Comments                   0
  Duplicate points           2608
  Faces                      1052
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     548
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3156 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000002
  Maximum face area is 0.020631

FACE_NULL_DELETE
  There are a total of 1052 faces.
  Of these, 1052 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3156 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.184045 0.002825 0.077348 0.261394
Y  -0.147900 0.001139 0.147800 0.295700
Z  -0.062000 0.096281 0.155000 0.217000

OBJ_WRITE - Wrote 4764 text lines.
[ 22%] Generating /<<BUILDDIR>>package/meshes/head_v0/iv/head_tilt_L.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/head_tilt_L.stl /<<BUILDDIR>>package/meshes/head_v0/iv/head_tilt_L.iv
[ 22%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/shoulder_lift.stl /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   5384
  Colors                     0
  Comments                   0
  Duplicate points           262
  Faces                      106
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     56
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 318 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000056
  Maximum face area is 0.007610

FACE_NULL_DELETE
  There are a total of 106 faces.
  Of these, 106 passed the order test.

VERTEX_NORMAL_SET: Recomputed 318 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.182561 -0.038205 0.081019 0.263579
Y  -0.146989 0.004482 0.146989 0.293978
Z  0.046104 0.104563 0.155138 0.109034

OBJ_WRITE - Wrote 488 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   52684
  Colors                     0
  Comments                   0
  Duplicate points           2608
  Faces                      1052
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     548
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3156 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000002
  Maximum face area is 0.020631

FACE_NULL_DELETE
  There are a total of 1052 faces.
  Of these, 1052 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3156 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.184045 0.002825 0.077348 0.261394
Y  -0.147900 0.001139 0.147800 0.295700
Z  -0.062000 0.096281 0.155000 0.217000

IV_WRITE - Wrote 8524 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   5384
  Colors                     0
  Comments                   0
  Duplicate points           262
  Faces                      106
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     56
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 318 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000056
  Maximum face area is 0.007610

FACE_NULL_DELETE
  There are a total of 106 faces.
  Of these, 106 passed the order test.

VERTEX_NORMAL_SET: Recomputed 318 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.182561 -0.038205 0.081019 0.263579
Y  -0.146989 0.004482 0.146989 0.293978
Z  0.046104 0.104563 0.155138 0.109034

IV_WRITE - Wrote 918 text lines;
[ 22%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/iv/shoulder_lift.iv
[ 23%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/shoulder_lift.stl /<<BUILDDIR>>package/meshes/shoulder_v0/iv/shoulder_lift.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/shoulder_pan.stl /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   12084
  Colors                     0
  Comments                   0
  Duplicate points           585
  Faces                      240
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     135
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 720 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.005690
  Marked 2 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 240 faces.
  Of these, 238 passed the order test.

VERTEX_NORMAL_SET: Recomputed 714 face vertex normals.

FACE_NORMAL_AVE: Recomputed 238 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126944 0.058292 0.121550 0.248494
Y  -0.076696 -0.003063 0.076082 0.152778
Z  -0.126634 0.006468 0.127375 0.254009

OBJ_WRITE - Wrote 1095 text lines.
[ 24%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/iv/shoulder_pan.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/shoulder_pan.stl /<<BUILDDIR>>package/meshes/shoulder_v0/iv/shoulder_pan.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   12084
  Colors                     0
  Comments                   0
  Duplicate points           585
  Faces                      240
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     135
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 720 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.005690
  Marked 2 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 240 faces.
  Of these, 238 passed the order test.

VERTEX_NORMAL_SET: Recomputed 714 face vertex normals.

FACE_NORMAL_AVE: Recomputed 238 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126944 0.058292 0.121550 0.248494
Y  -0.076696 -0.003063 0.076082 0.152778
Z  -0.126634 0.006468 0.127375 0.254009

IV_WRITE - Wrote 2000 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   12584
  Colors                     0
  Comments                   0
  Duplicate points           623
  Faces                      250
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     127
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 750 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000089
  Maximum face area is 0.020318

FACE_NULL_DELETE
  There are a total of 250 faces.
  Of these, 250 passed the order test.

VERTEX_NORMAL_SET: Recomputed 750 face vertex normals.

FACE_NORMAL_AVE: Recomputed 250 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126993 0.064174 0.228695 0.355688
Y  -0.126869 0.000111 0.127037 0.253906
Z  -0.491271 -0.132367 0.141956 0.633227

OBJ_WRITE - Wrote 1135 text lines.
[ 25%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/shoulder_yaw.stl /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw.obj
[ 25%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/iv/shoulder_yaw.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   12584
  Colors                     0
  Comments                   0
  Duplicate points           623
  Faces                      250
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     127
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 750 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000089
  Maximum face area is 0.020318

FACE_NULL_DELETE
  There are a total of 250 faces.
  Of these, 250 passed the order test.

VERTEX_NORMAL_SET: Recomputed 750 face vertex normals.

FACE_NORMAL_AVE: Recomputed 250 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126993 0.064174 0.228695 0.355688
Y  -0.126869 0.000111 0.127037 0.253906
Z  -0.491271 -0.132367 0.141956 0.633227

IV_WRITE - Wrote 2068 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/shoulder_yaw.stl /<<BUILDDIR>>package/meshes/shoulder_v0/iv/shoulder_yaw.iv
[ 26%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/upper_arm_roll.stl /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll.obj
[ 26%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/iv/upper_arm_roll.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/upper_arm_roll.stl /<<BUILDDIR>>package/meshes/shoulder_v0/iv/upper_arm_roll.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   50084
  Colors                     0
  Comments                   0
  Duplicate points           2498
  Faces                      1000
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     502
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3000 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.019102

FACE_NULL_DELETE
  There are a total of 1000 faces.
  Of these, 1000 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3000 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.127119 0.005602 0.226503 0.353622
Y  -0.127130 0.002888 0.127185 0.254315
Z  -0.491002 -0.168147 0.141944 0.632946

OBJ_WRITE - Wrote 4510 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   50084
  Colors                     0
  Comments                   0
  Duplicate points           2498
  Faces                      1000
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     502
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 3000 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.019102

FACE_NULL_DELETE
  There are a total of 1000 faces.
  Of these, 1000 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3000 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.127119 0.005602 0.226503 0.353622
Y  -0.127130 0.002888 0.127185 0.254315
Z  -0.491002 -0.168147 0.141944 0.632946

IV_WRITE - Wrote 8068 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   49884
  Colors                     0
  Comments                   0
  Duplicate points           2486
  Faces                      996
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     502
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2988 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000587

FACE_NULL_DELETE
  There are a total of 996 faces.
  Of these, 996 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2988 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.117368 0.121126 0.140370 0.023002
Y  -0.066030 -0.000288 0.072108 0.138138
Z  -0.072087 -0.000009 0.072046 0.144132

OBJ_WRITE - Wrote 4494 text lines.
[ 26%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/upper_arm_roll_L.stl /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L.obj
[ 27%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt.obj
[ 27%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/iv/upper_arm_roll_L.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/upper_arm_roll_L.stl /<<BUILDDIR>>package/meshes/shoulder_v0/iv/upper_arm_roll_L.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   49884
  Colors                     0
  Comments                   0
  Duplicate points           2486
  Faces                      996
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     502
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2988 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000587

FACE_NULL_DELETE
  There are a total of 996 faces.
  Of these, 996 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2988 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.117368 0.121126 0.140370 0.023002
Y  -0.066030 -0.000288 0.072108 0.138138
Z  -0.072087 -0.000009 0.072046 0.144132

IV_WRITE - Wrote 8040 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/hok_tilt.stl /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   5084
  Colors                     0
  Comments                   0
  Duplicate points           244
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     56
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000024
  Maximum face area is 0.005218

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.118870 0.123191 0.140370 0.021500
Y  -0.072178 -0.000045 0.072178 0.144356
Z  -0.072178 -0.000045 0.072178 0.144356

OBJ_WRITE - Wrote 464 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   5084
  Colors                     0
  Comments                   0
  Duplicate points           244
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     56
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000024
  Maximum face area is 0.005218

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.118870 0.123191 0.140370 0.021500
Y  -0.072178 -0.000045 0.072178 0.144356
Z  -0.072178 -0.000045 0.072178 0.144356

IV_WRITE - Wrote 876 text lines;
[ 28%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/iv/hok_tilt.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/hok_tilt.stl /<<BUILDDIR>>package/meshes/tilting_laser_v0/iv/hok_tilt.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 2
  Text bytes (binary data)   25884
  Colors                     0
  Comments                   0
  Duplicate points           1286
  Faces                      516
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     262
  Objects                    1

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 1548 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.002765

FACE_NULL_DELETE
  There are a total of 516 faces.
  Of these, 516 passed the order test.

VERTEX_NORMAL_SET: Recomputed 1548 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.054966 0.002011 0.054972 0.109938
Y  -0.047000 0.000000 0.047000 0.094000
Z  -0.033250 0.014781 0.056050 0.089300

OBJ_WRITE - Wrote 2334 text lines.
[ 28%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/tilting_hokuyo.stl /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo.obj
[ 28%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/iv/tilting_hokuyo.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/tilting_hokuyo.stl /<<BUILDDIR>>package/meshes/tilting_laser_v0/iv/tilting_hokuyo.iv
[ 29%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/tilting_hokuyo_L.stl /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 2
  Text bytes (binary data)   25884
  Colors                     0
  Comments                   0
  Duplicate points           1286
  Faces                      516
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     262
  Objects                    1

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 1548 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.002765

FACE_NULL_DELETE
  There are a total of 516 faces.
  Of these, 516 passed the order test.

VERTEX_NORMAL_SET: Recomputed 1548 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.054966 0.002011 0.054972 0.109938
Y  -0.047000 0.000000 0.047000 0.094000
Z  -0.033250 0.014781 0.056050 0.089300

IV_WRITE - Wrote 4200 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   49984
  Colors                     0
  Comments                   0
  Duplicate points           2490
  Faces                      998
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     504
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2994 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.002448

FACE_NULL_DELETE
  There are a total of 998 faces.
  Of these, 998 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2994 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.060723 -0.001708 0.056297 0.117021
Y  -0.081500 -0.003149 0.081500 0.163000
Z  -0.056319 0.012273 0.063856 0.120175

OBJ_WRITE - Wrote 4504 text lines.
[ 30%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/iv/tilting_hokuyo_L.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   4584
  Colors                     0
  Comments                   0
  Duplicate points           221
  Faces                      90
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     49
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 270 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000021
  Maximum face area is 0.005238

FACE_NULL_DELETE
  There are a total of 90 faces.
  Of these, 90 passed the order test.

VERTEX_NORMAL_SET: Recomputed 270 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.063468 0.008273 0.057636 0.121104
Y  -0.081316 -0.001040 0.081316 0.162633
Z  -0.058179 0.020680 0.065459 0.123638

OBJ_WRITE - Wrote 417 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/tilting_hokuyo_L.stl /<<BUILDDIR>>package/meshes/tilting_laser_v0/iv/tilting_hokuyo_L.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   49984
  Colors                     0
  Comments                   0
  Duplicate points           2490
  Faces                      998
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     504
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2994 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.002448

FACE_NULL_DELETE
  There are a total of 998 faces.
  Of these, 998 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2994 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.060723 -0.001708 0.056297 0.117021
Y  -0.081500 -0.003149 0.081500 0.163000
Z  -0.056319 0.012273 0.063856 0.120175

IV_WRITE - Wrote 8058 text lines;
[ 30%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso.obj
[ 30%] Generating /<<BUILDDIR>>package/meshes/torso_v0/iv/torso.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/torso.stl /<<BUILDDIR>>package/meshes/torso_v0/convex/torso.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/torso.stl /<<BUILDDIR>>package/meshes/torso_v0/iv/torso.iv
[ 30%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/torso_lift.stl /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   4584
  Colors                     0
  Comments                   0
  Duplicate points           221
  Faces                      90
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     49
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 270 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000021
  Maximum face area is 0.005238

FACE_NULL_DELETE
  There are a total of 90 faces.
  Of these, 90 passed the order test.

VERTEX_NORMAL_SET: Recomputed 270 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.063468 0.008273 0.057636 0.121104
Y  -0.081316 -0.001040 0.081316 0.162633
Z  -0.058179 0.020680 0.065459 0.123638

IV_WRITE - Wrote 792 text lines;
[ 31%] Generating /<<BUILDDIR>>package/meshes/torso_v0/iv/torso_lift.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/torso_lift.stl /<<BUILDDIR>>package/meshes/torso_v0/iv/torso_lift.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   39834
  Colors                     0
  Comments                   0
  Duplicate points           1932
  Faces                      795
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     453
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2385 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000005
  Maximum face area is 0.049368

FACE_NULL_DELETE
  There are a total of 795 faces.
  Of these, 795 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2385 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.292938 -0.064541 0.114225 0.407164
Y  -0.264279 0.000824 0.263573 0.527852
Z  -0.506001 0.124305 0.316374 0.822375

OBJ_WRITE - Wrote 3641 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 2
  Text bytes (binary data)   104684
  Colors                     0
  Comments                   0
  Duplicate points           4980
  Faces                      2092
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     1296
  Objects                    1

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 6276 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.070049
  Marked 858 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 2092 faces.
  Of these, 1234 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3702 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.258000 -0.019625 0.115000 0.373000
Y  -0.262808 0.001502 0.262808 0.525617
Z  -0.498150 0.133012 0.302500 0.800650

OBJ_WRITE - Wrote 6240 text lines.
[ 32%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 2
  Text bytes (binary data)   104684
  Colors                     0
  Comments                   0
  Duplicate points           4980
  Faces                      2092
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     1296
  Objects                    1

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 6276 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.070049
  Marked 858 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 2092 faces.
  Of these, 1234 passed the order test.

VERTEX_NORMAL_SET: Recomputed 3702 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.258000 -0.019625 0.115000 0.373000
Y  -0.262808 0.001502 0.262808 0.525617
Z  -0.498150 0.133012 0.302500 0.800650

IV_WRITE - Wrote 11294 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/torso_lift_L.stl /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L.obj
[ 32%] Generating /<<BUILDDIR>>package/meshes/torso_v0/iv/torso_lift_L.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   39834
  Colors                     0
  Comments                   0
  Duplicate points           1932
  Faces                      795
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     453
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2385 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000005
  Maximum face area is 0.049368

FACE_NULL_DELETE
  There are a total of 795 faces.
  Of these, 795 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2385 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.292938 -0.064541 0.114225 0.407164
Y  -0.264279 0.000824 0.263573 0.527852
Z  -0.506001 0.124305 0.316374 0.822375

IV_WRITE - Wrote 6535 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/torso_lift_L.stl /<<BUILDDIR>>package/meshes/torso_v0/iv/torso_lift_L.iv
[ 33%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/elbow_flex.stl /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   7584
  Colors                     0
  Comments                   0
  Duplicate points           371
  Faces                      150
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     79
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 450 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000144
  Maximum face area is 0.077374

FACE_NULL_DELETE
  There are a total of 150 faces.
  Of these, 150 passed the order test.

VERTEX_NORMAL_SET: Recomputed 450 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.287653 -0.089605 0.111556 0.399209
Y  -0.263628 0.000000 0.263628 0.527256
Z  -0.506000 0.142544 0.314034 0.820034

OBJ_WRITE - Wrote 687 text lines.
[ 33%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/iv/elbow_flex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/elbow_flex.stl /<<BUILDDIR>>package/meshes/upper_arm_v0/iv/elbow_flex.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   7584
  Colors                     0
  Comments                   0
  Duplicate points           371
  Faces                      150
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     79
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 450 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000144
  Maximum face area is 0.077374

FACE_NULL_DELETE
  There are a total of 150 faces.
  Of these, 150 passed the order test.

VERTEX_NORMAL_SET: Recomputed 450 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.287653 -0.089605 0.111556 0.399209
Y  -0.263628 0.000000 0.263628 0.527256
Z  -0.506000 0.142544 0.314034 0.820034

IV_WRITE - Wrote 1272 text lines;
[ 34%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/forearm_roll.stl /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll.obj
[ 35%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/iv/forearm_roll.iv

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   7484
  Colors                     0
  Comments                   0
  Duplicate points           370
  Faces                      148
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     74
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 444 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000014
  Maximum face area is 0.002729

FACE_NULL_DELETE
  There are a total of 148 faces.
  Of these, 148 passed the order test.

VERTEX_NORMAL_SET: Recomputed 444 face vertex normals.

FACE_NORMAL_AVE: Recomputed 148 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.080296 0.017080 0.092506 0.172802
Y  -0.046966 0.000811 0.045862 0.092828
Z  -0.079990 -0.002023 0.080159 0.160150

OBJ_WRITE - Wrote 674 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   7484
  Colors                     0
  Comments                   0
  Duplicate points           370
  Faces                      148
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     74
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 444 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000014
  Maximum face area is 0.002729

FACE_NULL_DELETE
  There are a total of 148 faces.
  Of these, 148 passed the order test.

VERTEX_NORMAL_SET: Recomputed 444 face vertex normals.

FACE_NORMAL_AVE: Recomputed 148 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.080296 0.017080 0.092506 0.172802
Y  -0.046966 0.000811 0.045862 0.092828
Z  -0.079990 -0.002023 0.080159 0.160150

IV_WRITE - Wrote 1248 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/forearm_roll.stl /<<BUILDDIR>>package/meshes/upper_arm_v0/iv/forearm_roll.iv
[ 35%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/iv/forearm_roll_L.iv
[ 35%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/forearm_roll_L.stl /<<BUILDDIR>>package/meshes/upper_arm_v0/iv/forearm_roll_L.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/forearm_roll_L.stl /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L.obj

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   49734
  Colors                     0
  Comments                   0
  Duplicate points           2475
  Faces                      993
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     504
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2979 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000622

FACE_NULL_DELETE
  There are a total of 993 faces.
  Of these, 993 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2979 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.086741 0.106505 0.131005
Y  -0.041516 -0.000565 0.041257 0.082773
Z  -0.041300 0.009737 0.042800 0.084100

OBJ_WRITE - Wrote 4484 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   49734
  Colors                     0
  Comments                   0
  Duplicate points           2475
  Faces                      993
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     504
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 2979 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000000
  Maximum face area is 0.000622

FACE_NULL_DELETE
  There are a total of 993 faces.
  Of these, 993 passed the order test.

VERTEX_NORMAL_SET: Recomputed 2979 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.086741 0.106505 0.131005
Y  -0.041516 -0.000565 0.041257 0.082773
Z  -0.041300 0.009737 0.042800 0.084100

IV_WRITE - Wrote 8023 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   10084
  Colors                     0
  Comments                   0
  Duplicate points           498
  Faces                      200
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     102
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 600 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.000876

FACE_NULL_DELETE
  There are a total of 200 faces.
  Of these, 200 passed the order test.

VERTEX_NORMAL_SET: Recomputed 600 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.092577 0.106500 0.131000
Y  -0.041156 -0.001161 0.041073 0.082229
Z  -0.041009 0.007083 0.040987 0.081997

IV_WRITE - Wrote 1668 text lines;

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   10084
  Colors                     0
  Comments                   0
  Duplicate points           498
  Faces                      200
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     102
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 600 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.000876

FACE_NULL_DELETE
  There are a total of 200 faces.
  Of these, 200 passed the order test.

VERTEX_NORMAL_SET: Recomputed 600 face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.092577 0.106500 0.131000
Y  -0.041156 -0.001161 0.041073 0.082229
Z  -0.041009 0.007083 0.040987 0.081997

OBJ_WRITE - Wrote 910 text lines.
[ 35%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm.obj
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/upper_arm.stl /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm.obj
[ 36%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/iv/upper_arm.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/upper_arm.stl /<<BUILDDIR>>package/meshes/upper_arm_v0/iv/upper_arm.iv
[ 37%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/base_v0/convex/base.obj -v12 -p10
[ 37%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/base_v0/convex/base_L.obj -v12 -p10

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   16084
  Colors                     0
  Comments                   0
  Duplicate points           798
  Faces                      320
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     162
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 960 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000030
  Maximum face area is 0.008635

FACE_NULL_DELETE
  There are a total of 320 faces.
  Of these, 320 passed the order test.

VERTEX_NORMAL_SET: Recomputed 960 face vertex normals.

FACE_NORMAL_AVE: Recomputed 320 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.052245 0.286554 0.483713 0.535958
Y  -0.076946 -0.000337 0.075613 0.152559
Z  -0.086002 -0.003841 0.082547 0.168549

OBJ_WRITE - Wrote 1450 text lines.

STLA_READ - Fatal error!
  Unrecognized first word on line.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 1
  Text bytes (binary data)   16084
  Colors                     0
  Comments                   0
  Duplicate points           798
  Faces                      320
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     162
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 960 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000030
  Maximum face area is 0.008635

FACE_NULL_DELETE
  There are a total of 320 faces.
  Of these, 320 passed the order test.

VERTEX_NORMAL_SET: Recomputed 960 face vertex normals.

FACE_NORMAL_AVE: Recomputed 320 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.052245 0.286554 0.483713 0.535958
Y  -0.076946 -0.000337 0.075613 0.152559
Z  -0.086002 -0.003841 0.082547 0.168549

IV_WRITE - Wrote 2628 text lines;
[ 37%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/base_v0/convex/caster.obj -v12 -p10
[ 37%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/base_v0/convex/base_L.obj

# Input Mesh has 50 vertices and 96 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.obj for output.

Received hull 1  HullVolume(0.004)

Received hull 2  HullVolume(0.004)

Received hull 3  HullVolume(0.006)

Received hull 4  HullVolume(0.006)

Received hull 5  HullVolume(0.011)

Received hull 6  HullVolume(0.030)

Received hull 7  HullVolume(0.052)

Input triangle mesh with 96 triangles produced 7 output hulls.

Saving convex decomposition of 7 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/base_v0/convex/base_L.xml'

Saving convex decomposition of 7 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/base_v0/convex/base_L.dae'

[ 37%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.obj
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L.obj

# Input Mesh has 96 vertices and 188 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Received hull 7  HullVolume(0.000)

Received hull 8  HullVolume(0.000)

Received hull 9  HullVolume(0.001)

Input triangle mesh with 188 triangles produced 9 output hulls.

Saving convex decomposition of 9 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/base_v0/convex/caster_L.xml'

Saving convex decomposition of 9 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/base_v0/convex/caster_L.dae'

/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel.obj -v12 -p10
[ 37%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/base_v0/convex/wheel.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel.obj

# Input Mesh has 690 vertices and 1380 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Input triangle mesh with 1380 triangles produced 4 output hulls.

Saving convex decomposition of 4 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel.xml'

Saving convex decomposition of 4 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel.dae'

[ 37%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/base_v0/convex/wheel.obj

# Input Mesh has 500 vertices and 1000 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 1000 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/base_v0/convex/wheel.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/base_v0/convex/wheel.dae'

########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/base_v0/convex/caster.obj

# Input Mesh has 502 vertices and 1000 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Received hull 7  HullVolume(0.000)

Received hull 8  HullVolume(0.000)

Received hull 9  HullVolume(0.001)

Input triangle mesh with 1000 triangles produced 9 output hulls.

Saving convex decomposition of 9 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/base_v0/convex/caster.xml'

Saving convex decomposition of 9 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/base_v0/convex/caster.dae'

[ 37%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex.obj -v12 -p10
[ 38%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex.obj

# Input Mesh has 55 vertices and 97 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 97 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex.dae'

[ 39%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L.obj

# Input Mesh has 77 vertices and 150 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 150 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L.dae'

[ 39%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll.obj

# Input Mesh has 500 vertices and 998 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 998 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll.dae'

[ 40%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l.obj

# Input Mesh has 442 vertices and 866 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Input triangle mesh with 866 triangles produced 2 output hulls.

Saving convex decomposition of 2 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l.xml'

Saving convex decomposition of 2 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l.dae'

[ 41%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l.obj

# Input Mesh has 73 vertices and 138 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 138 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l.dae'

########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r.obj

# Input Mesh has 73 vertices and 138 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 138 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r.dae'

[ 42%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r.obj -v12 -p10
[ 42%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm.obj

# Input Mesh has 87 vertices and 170 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 170 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm.dae'

[ 42%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/base_v0/convex/base.obj

# Input Mesh has 589 vertices and 1164 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.obj for output.

Received hull 1  HullVolume(0.002)

Received hull 2  HullVolume(0.002)

Received hull 3  HullVolume(0.003)

Received hull 4  HullVolume(0.003)

Received hull 5  HullVolume(0.002)

Received hull 6  HullVolume(0.002)

Received hull 7  HullVolume(0.003)

Received hull 8  HullVolume(0.003)

Received hull 9  HullVolume(0.005)

Received hull 10  HullVolume(0.005)

Received hull 11  HullVolume(0.010)

Received hull 12  HullVolume(0.013)

Received hull 13  HullVolume(0.053)

Input triangle mesh with 1164 triangles produced 13 output hulls.

Saving convex decomposition of 13 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/base_v0/convex/base.xml'

Saving convex decomposition of 13 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/base_v0/convex/base.dae'

[ 42%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger.obj

# Input Mesh has 124 vertices and 210 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 210 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger.dae'

########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip.obj

# Input Mesh has 77 vertices and 149 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 149 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip.dae'

[ 42%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r.obj

# Input Mesh has 442 vertices and 866 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Input triangle mesh with 866 triangles produced 2 output hulls.

Saving convex decomposition of 2 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r.xml'

Saving convex decomposition of 2 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r.dae'

[ 43%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm.obj

# Input Mesh has 172 vertices and 340 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Received hull 7  HullVolume(0.000)

Received hull 8  HullVolume(0.000)

Received hull 9  HullVolume(0.000)

Received hull 10  HullVolume(0.000)

Received hull 11  HullVolume(0.000)

Input triangle mesh with 340 triangles produced 11 output hulls.

Saving convex decomposition of 11 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm.xml'

Saving convex decomposition of 11 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm.dae'

[ 44%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r.obj -v12 -p10
[ 44%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l.obj

# Input Mesh has 114 vertices and 220 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 220 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l.dae'

[ 44%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating.obj

# Input Mesh has 498 vertices and 970 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 970 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating.dae'

########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r.obj

# Input Mesh has 114 vertices and 220 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.obj for output.

Received hull 1  HullVolume(0.000)

Input triangle mesh with 220 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r.dae'

[ 44%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt.obj -v12 -p10
[ 45%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L.obj

# Input Mesh has 56 vertices and 106 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.001)

Received hull 4  HullVolume(0.001)

Received hull 5  HullVolume(0.001)

Received hull 6  HullVolume(0.003)

Input triangle mesh with 106 triangles produced 6 output hulls.

Saving convex decomposition of 6 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L.xml'

Saving convex decomposition of 6 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L.dae'

########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L.obj

# Input Mesh has 112 vertices and 220 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.001)

Received hull 4  HullVolume(0.002)

Received hull 5  HullVolume(0.003)

Input triangle mesh with 220 triangles produced 5 output hulls.

Saving convex decomposition of 5 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L.xml'

Saving convex decomposition of 5 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L.dae'

[ 45%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift.obj -v12 -p10
[ 45%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift.obj

# Input Mesh has 135 vertices and 238 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Received hull 7  HullVolume(0.000)

Received hull 8  HullVolume(0.000)

Received hull 9  HullVolume(0.000)

Received hull 10  HullVolume(0.000)

Received hull 11  HullVolume(0.000)

Input triangle mesh with 238 triangles produced 11 output hulls.

Saving convex decomposition of 11 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift.xml'

Saving convex decomposition of 11 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift.dae'

[ 46%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan.obj

# Input Mesh has 127 vertices and 250 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.obj for output.

Received hull 1  HullVolume(0.001)

Received hull 2  HullVolume(0.001)

Received hull 3  HullVolume(0.002)

Received hull 4  HullVolume(0.002)

Received hull 5  HullVolume(0.022)

Input triangle mesh with 250 triangles produced 5 output hulls.

Saving convex decomposition of 5 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan.xml'

Saving convex decomposition of 5 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan.dae'

[ 47%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll.obj

# Input Mesh has 502 vertices and 996 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Input triangle mesh with 996 triangles produced 3 output hulls.

Saving convex decomposition of 3 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll.xml'

Saving convex decomposition of 3 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll.dae'

########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt.obj

# Input Mesh has 548 vertices and 1052 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Received hull 7  HullVolume(0.006)

Input triangle mesh with 1052 triangles produced 7 output hulls.

Saving convex decomposition of 7 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt.xml'

Saving convex decomposition of 7 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt.dae'

[ 47%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.obj
[ 47%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L.obj -v12 -p10
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L.obj

# Input Mesh has 56 vertices and 100 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Input triangle mesh with 100 triangles produced 6 output hulls.

Saving convex decomposition of 6 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L.xml'

Saving convex decomposition of 6 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L.dae'

[ 47%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan.obj

# Input Mesh has 506 vertices and 1000 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Received hull 7  HullVolume(0.001)

Received hull 8  HullVolume(0.001)

Received hull 9  HullVolume(0.003)

Input triangle mesh with 1000 triangles produced 9 output hulls.

Saving convex decomposition of 9 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/head_v0/convex/head_pan.xml'

Saving convex decomposition of 9 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/head_v0/convex/head_pan.dae'

[ 48%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.obj

# Input Mesh has 49 vertices and 90 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.001)

Input triangle mesh with 90 triangles produced 6 output hulls.

Saving convex decomposition of 6 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.xml'

Saving convex decomposition of 6 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.dae'

########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw.obj

# Input Mesh has 502 vertices and 1000 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.obj for output.

Received hull 1  HullVolume(0.001)

Received hull 2  HullVolume(0.001)

Received hull 3  HullVolume(0.002)

Received hull 4  HullVolume(0.002)

Received hull 5  HullVolume(0.022)

Input triangle mesh with 1000 triangles produced 5 output hulls.

Saving convex decomposition of 5 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw.xml'

Saving convex decomposition of 5 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw.dae'

[ 49%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/torso_v0/convex/torso.obj -v12 -p10
[ 49%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt.obj

# Input Mesh has 262 vertices and 516 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Input triangle mesh with 516 triangles produced 5 output hulls.

Saving convex decomposition of 5 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt.xml'

Saving convex decomposition of 5 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt.dae'

[ 49%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L.obj

# Input Mesh has 79 vertices and 150 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.obj for output.

Received hull 1  HullVolume(0.001)

Received hull 2  HullVolume(0.002)

Received hull 3  HullVolume(0.007)

Received hull 4  HullVolume(0.015)

Received hull 5  HullVolume(0.023)

Input triangle mesh with 150 triangles produced 5 output hulls.

Saving convex decomposition of 5 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L.xml'

Saving convex decomposition of 5 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L.dae'

[ 50%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex.obj

# Input Mesh has 74 vertices and 148 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Received hull 7  HullVolume(0.000)

Received hull 8  HullVolume(0.000)

Received hull 9  HullVolume(0.000)

Input triangle mesh with 148 triangles produced 9 output hulls.

Saving convex decomposition of 9 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex.xml'

Saving convex decomposition of 9 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex.dae'

[ 51%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift.obj

# Input Mesh has 453 vertices and 795 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.002)

Received hull 4  HullVolume(0.002)

Received hull 5  HullVolume(0.002)

Received hull 6  HullVolume(0.015)

Received hull 7  HullVolume(0.022)

Input triangle mesh with 795 triangles produced 7 output hulls.

Saving convex decomposition of 7 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift.xml'

Saving convex decomposition of 7 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift.dae'

[ 51%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo.obj

# Input Mesh has 504 vertices and 998 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.obj for output.

Received hull 1  HullVolume(0.001)

Input triangle mesh with 998 triangles produced 1 output hulls.

Saving convex decomposition of 1 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo.xml'

Saving convex decomposition of 1 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo.dae'

[ 51%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.obj
/opt/ros/one/bin/convex_decomposition /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm.obj -v12 -p10
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L.obj

# Input Mesh has 102 vertices and 200 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Input triangle mesh with 200 triangles produced 5 output hulls.

Saving convex decomposition of 5 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L.xml'

Saving convex decomposition of 5 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L.dae'

[ 52%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 449
  Text bytes (binary data)   0
  Colors                     0
  Comments                   48
  Duplicate points           0
  Faces                      250
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     151
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 750 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000009
  Maximum face area is 0.097384
  Marked 1 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 250 faces.
  Of these, 249 passed the order test.

VERTEX_NORMAL_SET: Recomputed 747 face vertex normals.

FACE_NORMAL_AVE: Recomputed 249 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.335681 0.132106 0.333377 0.669058
Y  -0.333375 -0.000786 0.333375 0.666750
Z  -0.000001 0.157530 0.656183 0.656184

STLB_WRITE - Wrote 12534 bytes.
[ 52%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 449
  Text bytes (binary data)   0
  Colors                     0
  Comments                   48
  Duplicate points           0
  Faces                      250
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     151
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 750 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000009
  Maximum face area is 0.097384
  Marked 1 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 250 faces.
  Of these, 249 passed the order test.

VERTEX_NORMAL_SET: Recomputed 747 face vertex normals.

FACE_NORMAL_AVE: Recomputed 249 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.335681 0.132106 0.333377 0.669058
Y  -0.333375 -0.000786 0.333375 0.666750
Z  -0.000001 0.157530 0.656183 0.656184

STLA_WRITE - Wrote 1745 text lines.
[ 52%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/base_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 449
  Text bytes (binary data)   0
  Colors                     0
  Comments                   48
  Duplicate points           0
  Faces                      250
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     151
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 750 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000009
  Maximum face area is 0.097384
  Marked 1 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 250 faces.
  Of these, 249 passed the order test.

VERTEX_NORMAL_SET: Recomputed 747 face vertex normals.

FACE_NORMAL_AVE: Recomputed 249 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.335681 0.132106 0.333377 0.669058
Y  -0.333375 -0.000786 0.333375 0.666750
Z  -0.000001 0.157530 0.656183 0.656184

IV_WRITE - Wrote 2109 text lines;
[ 52%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.stlb
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll.obj

# Input Mesh has 504 vertices and 993 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Input triangle mesh with 993 triangles produced 5 output hulls.

Saving convex decomposition of 5 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll.xml'

Saving convex decomposition of 5 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll.dae'


DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 218
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      116
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     72
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 348 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000267
  Maximum face area is 0.111703

FACE_NULL_DELETE
  There are a total of 116 faces.
  Of these, 116 passed the order test.

VERTEX_NORMAL_SET: Recomputed 348 face vertex normals.

FACE_NORMAL_AVE: Recomputed 116 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.334121 0.049112 0.334121 0.668242
Y  -0.334121 -0.006273 0.334121 0.668242
Z  0.000000 0.200068 0.656175 0.656175

STLB_WRITE - Wrote 5884 bytes.
[ 53%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.stla
[ 54%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/base_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 218
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      116
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     72
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 348 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000267
  Maximum face area is 0.111703

FACE_NULL_DELETE
  There are a total of 116 faces.
  Of these, 116 passed the order test.

VERTEX_NORMAL_SET: Recomputed 348 face vertex normals.

FACE_NORMAL_AVE: Recomputed 116 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.334121 0.049112 0.334121 0.668242
Y  -0.334121 -0.006273 0.334121 0.668242
Z  0.000000 0.200068 0.656175 0.656175

STLA_WRITE - Wrote 814 text lines.
[ 54%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 218
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      116
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     72
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 348 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000267
  Maximum face area is 0.111703

FACE_NULL_DELETE
  There are a total of 116 faces.
  Of these, 116 passed the order test.

VERTEX_NORMAL_SET: Recomputed 348 face vertex normals.

FACE_NORMAL_AVE: Recomputed 116 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.334121 0.049112 0.334121 0.668242
Y  -0.334121 -0.006273 0.334121 0.668242
Z  0.000000 0.200068 0.656175 0.656175

IV_WRITE - Wrote 1020 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.stlb
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm.obj

# Input Mesh has 162 vertices and 320 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.obj for output.

Received hull 1  HullVolume(0.000)

Received hull 2  HullVolume(0.000)

Received hull 3  HullVolume(0.000)

Received hull 4  HullVolume(0.000)

Received hull 5  HullVolume(0.000)

Received hull 6  HullVolume(0.000)

Received hull 7  HullVolume(0.000)

Received hull 8  HullVolume(0.001)

Received hull 9  HullVolume(0.001)

Received hull 10  HullVolume(0.001)

Received hull 11  HullVolume(0.001)

Input triangle mesh with 320 triangles produced 11 output hulls.

Saving convex decomposition of 11 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm.xml'

Saving convex decomposition of 11 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm.dae'

[ 55%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 300
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      164
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     100
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 492 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000029
  Maximum face area is 0.011392

FACE_NULL_DELETE
  There are a total of 164 faces.
  Of these, 164 passed the order test.

VERTEX_NORMAL_SET: Recomputed 492 face vertex normals.

FACE_NORMAL_AVE: Recomputed 164 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.091023 -0.002757 0.093551 0.184574
Y  -0.086500 0.000522 0.086500 0.173000
Z  -0.031770 0.095783 0.167750 0.199520

STLB_WRITE - Wrote 8284 bytes.
[ 56%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/caster_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 300
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      164
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     100
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 492 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000029
  Maximum face area is 0.011392

FACE_NULL_DELETE
  There are a total of 164 faces.
  Of these, 164 passed the order test.

VERTEX_NORMAL_SET: Recomputed 492 face vertex normals.

FACE_NORMAL_AVE: Recomputed 164 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.091023 -0.002757 0.093551 0.184574
Y  -0.086500 0.000522 0.086500 0.173000
Z  -0.031770 0.095783 0.167750 0.199520

STLA_WRITE - Wrote 1150 text lines.
[ 56%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 300
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      164
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     100
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 492 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000029
  Maximum face area is 0.011392

FACE_NULL_DELETE
  There are a total of 164 faces.
  Of these, 164 passed the order test.

VERTEX_NORMAL_SET: Recomputed 492 face vertex normals.

FACE_NORMAL_AVE: Recomputed 164 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.091023 -0.002757 0.093551 0.184574
Y  -0.086500 0.000522 0.086500 0.173000
Z  -0.031770 0.095783 0.167750 0.199520

IV_WRITE - Wrote 1412 text lines;
[ 57%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 276
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      148
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     92
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 444 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000022
  Maximum face area is 0.012351

FACE_NULL_DELETE
  There are a total of 148 faces.
  Of these, 148 passed the order test.

VERTEX_NORMAL_SET: Recomputed 444 face vertex normals.

FACE_NORMAL_AVE: Recomputed 148 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.100000 -0.001766 0.100000 0.200000
Y  -0.086552 -0.000188 0.086552 0.173104
Z  -0.031770 0.102208 0.167750 0.199520

STLB_WRITE - Wrote 7484 bytes.
[ 57%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/caster_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 276
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      148
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     92
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 444 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000022
  Maximum face area is 0.012351

FACE_NULL_DELETE
  There are a total of 148 faces.
  Of these, 148 passed the order test.

VERTEX_NORMAL_SET: Recomputed 444 face vertex normals.

FACE_NORMAL_AVE: Recomputed 148 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.100000 -0.001766 0.100000 0.200000
Y  -0.086552 -0.000188 0.086552 0.173104
Z  -0.031770 0.102208 0.167750 0.199520

STLA_WRITE - Wrote 1038 text lines.
[ 57%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.stlb
[ 58%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 276
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      148
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     92
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 444 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000022
  Maximum face area is 0.012351

FACE_NULL_DELETE
  There are a total of 148 faces.
  Of these, 148 passed the order test.

VERTEX_NORMAL_SET: Recomputed 444 face vertex normals.

FACE_NORMAL_AVE: Recomputed 148 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.100000 -0.001766 0.100000 0.200000
Y  -0.086552 -0.000188 0.086552 0.173104
Z  -0.031770 0.102208 0.167750 0.199520

IV_WRITE - Wrote 1284 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 149
  Text bytes (binary data)   0
  Colors                     0
  Comments                   21
  Duplicate points           0
  Faces                      80
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     48
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 240 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000205
  Maximum face area is 0.001376

FACE_NULL_DELETE
  There are a total of 80 faces.
  Of these, 80 passed the order test.

VERTEX_NORMAL_SET: Recomputed 240 face vertex normals.

FACE_NORMAL_AVE: Recomputed 80 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.079000 -0.000898 0.079000 0.158000
Y  -0.016718 0.000288 0.016718 0.033436
Z  -0.078196 -0.000507 0.078196 0.156392

STLB_WRITE - Wrote 4084 bytes.
[ 59%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 149
  Text bytes (binary data)   0
  Colors                     0
  Comments                   21
  Duplicate points           0
  Faces                      80
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     48
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 240 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000205
  Maximum face area is 0.001376

FACE_NULL_DELETE
  There are a total of 80 faces.
  Of these, 80 passed the order test.

VERTEX_NORMAL_SET: Recomputed 240 face vertex normals.

FACE_NORMAL_AVE: Recomputed 80 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.079000 -0.000898 0.079000 0.158000
Y  -0.016718 0.000288 0.016718 0.033436
Z  -0.078196 -0.000507 0.078196 0.156392

STLA_WRITE - Wrote 562 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/pr2_wheel_convex.iv
[ 59%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.stlb
[ 60%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 149
  Text bytes (binary data)   0
  Colors                     0
  Comments                   21
  Duplicate points           0
  Faces                      80
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     48
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 240 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000205
  Maximum face area is 0.001376

FACE_NULL_DELETE
  There are a total of 80 faces.
  Of these, 80 passed the order test.

VERTEX_NORMAL_SET: Recomputed 240 face vertex normals.

FACE_NORMAL_AVE: Recomputed 80 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.079000 -0.000898 0.079000 0.158000
Y  -0.016718 0.000288 0.016718 0.033436
Z  -0.078196 -0.000507 0.078196 0.156392

IV_WRITE - Wrote 720 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000779
  Maximum face area is 0.003827

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.078163 -0.002599 0.078163 0.156326
Y  -0.032059 -0.001233 0.018500 0.050559
Z  -0.079214 -0.006758 0.079214 0.158428

STLB_WRITE - Wrote 1084 bytes.
[ 60%] Generating /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000779
  Maximum face area is 0.003827

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.078163 -0.002599 0.078163 0.156326
Y  -0.032059 -0.001233 0.018500 0.050559
Z  -0.079214 -0.006758 0.079214 0.158428

STLA_WRITE - Wrote 142 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.obj /<<BUILDDIR>>package/meshes/base_v0/convex/wheel_convex.iv
[ 60%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.stlb
[ 61%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000779
  Maximum face area is 0.003827

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.078163 -0.002599 0.078163 0.156326
Y  -0.032059 -0.001233 0.018500 0.050559
Z  -0.079214 -0.006758 0.079214 0.158428

IV_WRITE - Wrote 228 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 394
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     132
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000020
  Maximum face area is 0.004233

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.094831 0.178740 0.357172 0.262341
Y  -0.059299 0.002507 0.059897 0.119196
Z  -0.053913 0.002821 0.065888 0.119801

STLB_WRITE - Wrote 11084 bytes.
[ 61%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.stlb
[ 62%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 394
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     132
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000020
  Maximum face area is 0.004233

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.094831 0.178740 0.357172 0.262341
Y  -0.059299 0.002507 0.059897 0.119196
Z  -0.053913 0.002821 0.065888 0.119801

STLA_WRITE - Wrote 1542 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/forearm_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.stlb
[ 63%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000164
  Maximum face area is 0.001407

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.036899 -0.001573 0.027410 0.064309
Y  -0.020763 -0.003402 0.020663 0.041426
Z  -0.040505 -0.001144 0.037421 0.077926

STLB_WRITE - Wrote 1084 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 394
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     132
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000020
  Maximum face area is 0.004233

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.094831 0.178740 0.357172 0.262341
Y  -0.059299 0.002507 0.059897 0.119196
Z  -0.053913 0.002821 0.065888 0.119801

IV_WRITE - Wrote 1868 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000164
  Maximum face area is 0.001407

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.036899 -0.001573 0.027410 0.064309
Y  -0.020763 -0.003402 0.020663 0.041426
Z  -0.040505 -0.001144 0.037421 0.077926

STLA_WRITE - Wrote 142 text lines.
[ 63%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.stlb
[ 64%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_flex_convex.iv
[ 64%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.stla
########################################################################

# Perfomring approximate convex decomposition for triangle mesh /<<BUILDDIR>>package/meshes/torso_v0/convex/torso.obj

# Input Mesh has 1019 vertices and 1234 triangles.

# Recursion depth: 5

# Concavity Threshold Percentage: 5.00

# Hull Merge Volume Percentage: 10.00

# Maximum output vertices per hull: 12

# Hull Skin Width: 0.00

########################################################################

Opened Wavefront file /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.obj for output.

Received hull 1  HullVolume(0.001)

Received hull 2  HullVolume(0.001)

Received hull 3  HullVolume(0.001)

Received hull 4  HullVolume(0.001)

Received hull 5  HullVolume(0.019)

Input triangle mesh with 1234 triangles produced 5 output hulls.

Saving convex decomposition of 5 hulls to NxuStream file '/<<BUILDDIR>>package/meshes/torso_v0/convex/torso.xml'

Saving convex decomposition of 5 hulls to COLLADA file '/<<BUILDDIR>>package/meshes/torso_v0/convex/torso.dae'


DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000164
  Maximum face area is 0.001407

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.036899 -0.001573 0.027410 0.064309
Y  -0.020763 -0.003402 0.020663 0.041426
Z  -0.040505 -0.001144 0.037421 0.077926

IV_WRITE - Wrote 228 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000075
  Maximum face area is 0.000431

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.032371 0.041700 0.016900
Y  -0.018907 -0.000741 0.018900 0.037807
Z  -0.018900 -0.000013 0.018900 0.037800

STLB_WRITE - Wrote 1084 bytes.
[ 64%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_convex.iv
[ 65%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.stla
[ 65%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000075
  Maximum face area is 0.000431

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.032371 0.041700 0.016900
Y  -0.018907 -0.000741 0.018900 0.037807
Z  -0.018900 -0.000013 0.018900 0.037800

STLA_WRITE - Wrote 142 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000075
  Maximum face area is 0.000431

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.032371 0.041700 0.016900
Y  -0.018907 -0.000741 0.018900 0.037807
Z  -0.018900 -0.000013 0.018900 0.037800

IV_WRITE - Wrote 228 text lines;
[ 65%] Generating /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000034
  Maximum face area is 0.000387

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.031596 0.041700 0.016900
Y  -0.018900 -0.003052 0.018900 0.037800
Z  -0.019080 -0.000990 0.018894 0.037974

STLA_WRITE - Wrote 142 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.obj /<<BUILDDIR>>package/meshes/forearm_v0/convex/wrist_roll_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000034
  Maximum face area is 0.000387

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.031596 0.041700 0.016900
Y  -0.018900 -0.003052 0.018900 0.037800
Z  -0.019080 -0.000990 0.018894 0.037974

STLB_WRITE - Wrote 1084 bytes.
[ 65%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000034
  Maximum face area is 0.000387

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.024800 0.031596 0.041700 0.016900
Y  -0.018900 -0.003052 0.018900 0.037800
Z  -0.019080 -0.000990 0.018894 0.037974

IV_WRITE - Wrote 228 text lines;
[ 66%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.stla
[ 66%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_l_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 79
  Text bytes (binary data)   0
  Colors                     0
  Comments                   15
  Duplicate points           0
  Faces                      40
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     24
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 120 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000031
  Maximum face area is 0.000303

FACE_NULL_DELETE
  There are a total of 40 faces.
  Of these, 40 passed the order test.

VERTEX_NORMAL_SET: Recomputed 120 face vertex normals.

FACE_NORMAL_AVE: Recomputed 40 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.000577 0.030524 0.055954
Y  -0.014948 0.005075 0.028403 0.043351
Z  -0.011504 0.000393 0.011498 0.023002

STLB_WRITE - Wrote 2084 bytes.
[ 66%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 79
  Text bytes (binary data)   0
  Colors                     0
  Comments                   15
  Duplicate points           0
  Faces                      40
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     24
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 120 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000031
  Maximum face area is 0.000303

FACE_NULL_DELETE
  There are a total of 40 faces.
  Of these, 40 passed the order test.

VERTEX_NORMAL_SET: Recomputed 120 face vertex normals.

FACE_NORMAL_AVE: Recomputed 40 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.000577 0.030524 0.055954
Y  -0.014948 0.005075 0.028403 0.043351
Z  -0.011504 0.000393 0.011498 0.023002

STLA_WRITE - Wrote 282 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 79
  Text bytes (binary data)   0
  Colors                     0
  Comments                   15
  Duplicate points           0
  Faces                      40
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     24
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 120 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000031
  Maximum face area is 0.000303

FACE_NULL_DELETE
  There are a total of 40 faces.
  Of these, 40 passed the order test.

VERTEX_NORMAL_SET: Recomputed 120 face vertex normals.

FACE_NORMAL_AVE: Recomputed 40 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.000577 0.030524 0.055954
Y  -0.014948 0.005075 0.028403 0.043351
Z  -0.011504 0.000393 0.011498 0.023002

IV_WRITE - Wrote 392 text lines;
[ 66%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000006
  Maximum face area is 0.000315

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.014708 0.031250 0.036000
Y  -0.014948 -0.013048 -0.011942 0.003006
Z  -0.011504 0.000050 0.011496 0.023000

STLB_WRITE - Wrote 1084 bytes.
[ 66%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.iv
[ 67%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000006
  Maximum face area is 0.000315

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.014708 0.031250 0.036000
Y  -0.014948 -0.013048 -0.011942 0.003006
Z  -0.011504 0.000050 0.011496 0.023000

STLA_WRITE - Wrote 142 text lines.
[ 67%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000006
  Maximum face area is 0.000315

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.014708 0.031250 0.036000
Y  -0.014948 -0.013048 -0.011942 0.003006
Z  -0.011504 0.000050 0.011496 0.023000

IV_WRITE - Wrote 228 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000009
  Maximum face area is 0.000262

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.011540 0.030524 0.035274
Y  0.011909 0.012883 0.014945 0.003036
Z  -0.011500 0.000197 0.011500 0.023000

STLB_WRITE - Wrote 1084 bytes.
[ 67%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000009
  Maximum face area is 0.000262

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.011540 0.030524 0.035274
Y  0.011909 0.012883 0.014945 0.003036
Z  -0.011500 0.000197 0.011500 0.023000

STLA_WRITE - Wrote 142 text lines.
[ 67%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.stla
[ 68%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000009
  Maximum face area is 0.000262

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.004750 0.011540 0.030524 0.035274
Y  0.011909 0.012883 0.014945 0.003036
Z  -0.011500 0.000197 0.011500 0.023000

IV_WRITE - Wrote 228 text lines;
[ 68%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/finger_tip_r_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 79
  Text bytes (binary data)   0
  Colors                     0
  Comments                   15
  Duplicate points           0
  Faces                      40
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     24
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 120 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000031
  Maximum face area is 0.000352

FACE_NULL_DELETE
  There are a total of 40 faces.
  Of these, 40 passed the order test.

VERTEX_NORMAL_SET: Recomputed 120 face vertex normals.

FACE_NORMAL_AVE: Recomputed 40 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.000881 0.030543 0.055973
Y  -0.028400 -0.005903 0.014945 0.043345
Z  -0.011500 0.000355 0.011500 0.023000

STLA_WRITE - Wrote 282 text lines.
[ 69%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 79
  Text bytes (binary data)   0
  Colors                     0
  Comments                   15
  Duplicate points           0
  Faces                      40
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     24
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 120 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000031
  Maximum face area is 0.000352

FACE_NULL_DELETE
  There are a total of 40 faces.
  Of these, 40 passed the order test.

VERTEX_NORMAL_SET: Recomputed 120 face vertex normals.

FACE_NORMAL_AVE: Recomputed 40 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.000881 0.030543 0.055973
Y  -0.028400 -0.005903 0.014945 0.043345
Z  -0.011500 0.000355 0.011500 0.023000

IV_WRITE - Wrote 392 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 79
  Text bytes (binary data)   0
  Colors                     0
  Comments                   15
  Duplicate points           0
  Faces                      40
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     24
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 120 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000031
  Maximum face area is 0.000352

FACE_NULL_DELETE
  There are a total of 40 faces.
  Of these, 40 passed the order test.

VERTEX_NORMAL_SET: Recomputed 120 face vertex normals.

FACE_NORMAL_AVE: Recomputed 40 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025430 0.000881 0.030543 0.055973
Y  -0.028400 -0.005903 0.014945 0.043345
Z  -0.011500 0.000355 0.011500 0.023000

STLB_WRITE - Wrote 2084 bytes.
[ 69%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000163
  Maximum face area is 0.002709

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.029449 0.077796 0.125113 0.095664
Y  -0.050204 0.006573 0.050643 0.100847
Z  -0.024235 0.001297 0.024231 0.048466

STLB_WRITE - Wrote 1084 bytes.
[ 70%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.stlb
[ 70%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/gripper_palm_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000163
  Maximum face area is 0.002709

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.029449 0.077796 0.125113 0.095664
Y  -0.050204 0.006573 0.050643 0.100847
Z  -0.024235 0.001297 0.024231 0.048466

STLA_WRITE - Wrote 142 text lines.
[ 71%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.stla
[ 72%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000163
  Maximum face area is 0.002709

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.029449 0.077796 0.125113 0.095664
Y  -0.050204 0.006573 0.050643 0.100847
Z  -0.024235 0.001297 0.024231 0.048466

IV_WRITE - Wrote 228 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000334
  Maximum face area is 0.002778

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008536 0.036075 0.094842 0.103378
Y  -0.008701 0.018338 0.045605 0.054306
Z  -0.027522 -0.000035 0.027502 0.055024

STLB_WRITE - Wrote 1084 bytes.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000334
  Maximum face area is 0.002778

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008536 0.036075 0.094842 0.103378
Y  -0.008701 0.018338 0.045605 0.054306
Z  -0.027522 -0.000035 0.027502 0.055024

STLA_WRITE - Wrote 142 text lines.
[ 72%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.stlb
[ 73%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000334
  Maximum face area is 0.002778

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008536 0.036075 0.094842 0.103378
Y  -0.008701 0.018338 0.045605 0.054306
Z  -0.027522 -0.000035 0.027502 0.055024

IV_WRITE - Wrote 228 text lines;
[ 74%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_finger_tip_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000036
  Maximum face area is 0.000675

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025956 0.006442 0.031007 0.056963
Y  -0.015813 0.000424 0.027700 0.043513
Z  -0.011198 0.000755 0.011154 0.022352

STLA_WRITE - Wrote 142 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000036
  Maximum face area is 0.000675

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025956 0.006442 0.031007 0.056963
Y  -0.015813 0.000424 0.027700 0.043513
Z  -0.011198 0.000755 0.011154 0.022352

STLB_WRITE - Wrote 1084 bytes.
[ 74%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.stlb
[ 75%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.iv
[ 75%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/l_floating_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000036
  Maximum face area is 0.000675

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.025956 0.006442 0.031007 0.056963
Y  -0.015813 0.000424 0.027700 0.043513
Z  -0.011198 0.000755 0.011154 0.022352

IV_WRITE - Wrote 228 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000023
  Maximum face area is 0.000511

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.002267 0.017322 0.045670 0.047937
Y  -0.005958 0.004103 0.016767 0.022725
Z  -0.015500 0.000551 0.015500 0.031000

STLB_WRITE - Wrote 1084 bytes.
[ 75%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.stla
[ 75%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000023
  Maximum face area is 0.000511

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.002267 0.017322 0.045670 0.047937
Y  -0.005958 0.004103 0.016767 0.022725
Z  -0.015500 0.000551 0.015500 0.031000

STLA_WRITE - Wrote 142 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000023
  Maximum face area is 0.000511

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.002267 0.017322 0.045670 0.047937
Y  -0.005958 0.004103 0.016767 0.022725
Z  -0.015500 0.000551 0.015500 0.031000

IV_WRITE - Wrote 228 text lines;
[ 76%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.iv
[ 76%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_l_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000284
  Maximum face area is 0.002664

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008842 0.036911 0.095311 0.104153
Y  -0.008993 0.021062 0.045732 0.054725
Z  -0.027750 -0.000000 0.027750 0.055500

STLB_WRITE - Wrote 1084 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000284
  Maximum face area is 0.002664

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008842 0.036911 0.095311 0.104153
Y  -0.008993 0.021062 0.045732 0.054725
Z  -0.027750 -0.000000 0.027750 0.055500

STLA_WRITE - Wrote 142 text lines.
[ 76%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.stla
[ 76%] Generating /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000284
  Maximum face area is 0.002664

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008842 0.036911 0.095311 0.104153
Y  -0.008993 0.021062 0.045732 0.054725
Z  -0.027750 -0.000000 0.027750 0.055500

IV_WRITE - Wrote 228 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000273
  Maximum face area is 0.002040

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008955 0.040857 0.095313 0.104268
Y  -0.045109 -0.021418 0.008521 0.053630
Z  -0.027751 0.000002 0.027754 0.055505

STLB_WRITE - Wrote 1084 bytes.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.obj /<<BUILDDIR>>package/meshes/gripper_v0/convex/upper_finger_r_convex.iv
[ 76%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.stlb
[ 77%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000273
  Maximum face area is 0.002040

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008955 0.040857 0.095313 0.104268
Y  -0.045109 -0.021418 0.008521 0.053630
Z  -0.027751 0.000002 0.027754 0.055505

STLA_WRITE - Wrote 142 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000273
  Maximum face area is 0.002040

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.008955 0.040857 0.095313 0.104268
Y  -0.045109 -0.021418 0.008521 0.053630
Z  -0.027751 0.000002 0.027754 0.055505

IV_WRITE - Wrote 228 text lines;
[ 78%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_convex.iv
[ 78%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 309
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      170
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     103
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 510 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000013
  Maximum face area is 0.020558

FACE_NULL_DELETE
  There are a total of 170 faces.
  Of these, 170 passed the order test.

VERTEX_NORMAL_SET: Recomputed 510 face vertex normals.

FACE_NORMAL_AVE: Recomputed 170 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.109980 0.064602 0.141562 0.251542
Y  -0.157667 -0.002568 0.157575 0.315242
Z  -0.065348 0.006686 0.076844 0.142192

STLB_WRITE - Wrote 8584 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 309
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      170
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     103
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 510 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000013
  Maximum face area is 0.020558

FACE_NULL_DELETE
  There are a total of 170 faces.
  Of these, 170 passed the order test.

VERTEX_NORMAL_SET: Recomputed 510 face vertex normals.

FACE_NORMAL_AVE: Recomputed 170 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.109980 0.064602 0.141562 0.251542
Y  -0.157667 -0.002568 0.157575 0.315242
Z  -0.065348 0.006686 0.076844 0.142192

STLA_WRITE - Wrote 1192 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 309
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      170
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     103
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 510 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000013
  Maximum face area is 0.020558

FACE_NULL_DELETE
  There are a total of 170 faces.
  Of these, 170 passed the order test.

VERTEX_NORMAL_SET: Recomputed 510 face vertex normals.

FACE_NORMAL_AVE: Recomputed 170 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.109980 0.064602 0.141562 0.251542
Y  -0.157667 -0.002568 0.157575 0.315242
Z  -0.065348 0.006686 0.076844 0.142192

IV_WRITE - Wrote 1460 text lines;
[ 78%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000063
  Maximum face area is 0.020881

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.112988 0.060543 0.144703 0.257691
Y  -0.158625 -0.024090 0.158071 0.316696
Z  -0.065861 0.000831 0.079373 0.145234

STLB_WRITE - Wrote 5084 bytes.
[ 79%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_pan_L_convex.stla
[ 79%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.stlb
[ 80%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000063
  Maximum face area is 0.020881

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.112988 0.060543 0.144703 0.257691
Y  -0.158625 -0.024090 0.158071 0.316696
Z  -0.065861 0.000831 0.079373 0.145234

IV_WRITE - Wrote 884 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000063
  Maximum face area is 0.020881

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.112988 0.060543 0.144703 0.257691
Y  -0.158625 -0.024090 0.158071 0.316696
Z  -0.065861 0.000831 0.079373 0.145234

STLA_WRITE - Wrote 702 text lines.
[ 80%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 254
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      140
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     84
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 420 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.028965
  Marked 2 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 140 faces.
  Of these, 138 passed the order test.

VERTEX_NORMAL_SET: Recomputed 414 face vertex normals.

FACE_NORMAL_AVE: Recomputed 138 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.181850 0.008348 0.073349 0.255199
Y  -0.145664 -0.000034 0.143521 0.289185
Z  -0.062000 0.008894 0.154986 0.216986

STLB_WRITE - Wrote 6984 bytes.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 254
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      140
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     84
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 420 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.028965
  Marked 2 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 140 faces.
  Of these, 138 passed the order test.

VERTEX_NORMAL_SET: Recomputed 414 face vertex normals.

FACE_NORMAL_AVE: Recomputed 138 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.181850 0.008348 0.073349 0.255199
Y  -0.145664 -0.000034 0.143521 0.289185
Z  -0.062000 0.008894 0.154986 0.216986

STLA_WRITE - Wrote 968 text lines.
[ 81%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.stlb
[ 81%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 254
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      140
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     84
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 420 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.028965
  Marked 2 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 140 faces.
  Of these, 138 passed the order test.

VERTEX_NORMAL_SET: Recomputed 414 face vertex normals.

FACE_NORMAL_AVE: Recomputed 138 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.181850 0.008348 0.073349 0.255199
Y  -0.145664 -0.000034 0.143521 0.289185
Z  -0.062000 0.008894 0.154986 0.216986

IV_WRITE - Wrote 1198 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.stla
[ 81%] Generating /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.obj /<<BUILDDIR>>package/meshes/head_v0/convex/head_tilt_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 192
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      102
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     63
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 306 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000139
  Maximum face area is 0.018725

FACE_NULL_DELETE
  There are a total of 102 faces.
  Of these, 102 passed the order test.

VERTEX_NORMAL_SET: Recomputed 306 face vertex normals.

FACE_NORMAL_AVE: Recomputed 102 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.182561 -0.003261 0.081019 0.263580
Y  -0.146988 0.002327 0.146988 0.293976
Z  0.046104 0.107938 0.155138 0.109034

STLB_WRITE - Wrote 5184 bytes.
[ 81%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 192
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      102
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     63
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 306 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000139
  Maximum face area is 0.018725

FACE_NULL_DELETE
  There are a total of 102 faces.
  Of these, 102 passed the order test.

VERTEX_NORMAL_SET: Recomputed 306 face vertex normals.

FACE_NORMAL_AVE: Recomputed 102 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.182561 -0.003261 0.081019 0.263580
Y  -0.146988 0.002327 0.146988 0.293976
Z  0.046104 0.107938 0.155138 0.109034

STLA_WRITE - Wrote 716 text lines.
[ 82%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 192
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      102
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     63
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 306 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000139
  Maximum face area is 0.018725

FACE_NULL_DELETE
  There are a total of 102 faces.
  Of these, 102 passed the order test.

VERTEX_NORMAL_SET: Recomputed 306 face vertex normals.

FACE_NORMAL_AVE: Recomputed 102 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.182561 -0.003261 0.081019 0.263580
Y  -0.146988 0.002327 0.146988 0.293976
Z  0.046104 0.107938 0.155138 0.109034

IV_WRITE - Wrote 904 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.stla
[ 83%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_lift_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 385
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      214
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     129
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 642 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000003
  Maximum face area is 0.006939

FACE_NULL_DELETE
  There are a total of 214 faces.
  Of these, 214 passed the order test.

VERTEX_NORMAL_SET: Recomputed 642 face vertex normals.

FACE_NORMAL_AVE: Recomputed 214 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126944 0.027581 0.121550 0.248494
Y  -0.076696 0.005165 0.076082 0.152778
Z  -0.126634 -0.002990 0.127375 0.254009

STLB_WRITE - Wrote 10784 bytes.
[ 83%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 385
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      214
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     129
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 642 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000003
  Maximum face area is 0.006939

FACE_NULL_DELETE
  There are a total of 214 faces.
  Of these, 214 passed the order test.

VERTEX_NORMAL_SET: Recomputed 642 face vertex normals.

FACE_NORMAL_AVE: Recomputed 214 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126944 0.027581 0.121550 0.248494
Y  -0.076696 0.005165 0.076082 0.152778
Z  -0.126634 -0.002990 0.127375 0.254009

STLA_WRITE - Wrote 1500 text lines.
[ 84%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 385
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      214
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     129
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 642 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000003
  Maximum face area is 0.006939

FACE_NULL_DELETE
  There are a total of 214 faces.
  Of these, 214 passed the order test.

VERTEX_NORMAL_SET: Recomputed 642 face vertex normals.

FACE_NORMAL_AVE: Recomputed 214 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126944 0.027581 0.121550 0.248494
Y  -0.076696 0.005165 0.076082 0.152778
Z  -0.126634 -0.002990 0.127375 0.254009

IV_WRITE - Wrote 1820 text lines;
[ 84%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_pan_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000104
  Maximum face area is 0.075581

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126925 0.101950 0.228695 0.355620
Y  -0.126404 -0.002663 0.126089 0.252492
Z  -0.491271 -0.038512 0.141956 0.633227

STLB_WRITE - Wrote 5084 bytes.
[ 84%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.stlb
[ 84%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000104
  Maximum face area is 0.075581

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126925 0.101950 0.228695 0.355620
Y  -0.126404 -0.002663 0.126089 0.252492
Z  -0.491271 -0.038512 0.141956 0.633227

STLA_WRITE - Wrote 702 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000104
  Maximum face area is 0.075581

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.126925 0.101950 0.228695 0.355620
Y  -0.126404 -0.002663 0.126089 0.252492
Z  -0.491271 -0.038512 0.141956 0.633227

IV_WRITE - Wrote 884 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000273
  Maximum face area is 0.074749

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.127119 0.101067 0.226503 0.353622
Y  -0.127021 -0.001210 0.126995 0.254016
Z  -0.490925 -0.042301 0.141944 0.632869

STLB_WRITE - Wrote 5084 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000273
  Maximum face area is 0.074749

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.127119 0.101067 0.226503 0.353622
Y  -0.127021 -0.001210 0.126995 0.254016
Z  -0.490925 -0.042301 0.141944 0.632869

STLA_WRITE - Wrote 702 text lines.
[ 85%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.stlb
[ 85%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/shoulder_yaw_convex.iv
[ 85%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.iv
[ 85%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 114
  Text bytes (binary data)   0
  Colors                     0
  Comments                   18
  Duplicate points           0
  Faces                      60
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     36
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 180 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000038
  Maximum face area is 0.001659

FACE_NULL_DELETE
  There are a total of 60 faces.
  Of these, 60 passed the order test.

VERTEX_NORMAL_SET: Recomputed 180 face vertex normals.

FACE_NORMAL_AVE: Recomputed 60 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.117370 0.123288 0.140370 0.023000
Y  -0.057734 0.018040 0.071865 0.129599
Z  -0.072087 0.001786 0.072046 0.144133

STLB_WRITE - Wrote 3084 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000273
  Maximum face area is 0.074749

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.127119 0.101067 0.226503 0.353622
Y  -0.127021 -0.001210 0.126995 0.254016
Z  -0.490925 -0.042301 0.141944 0.632869

IV_WRITE - Wrote 884 text lines;
[ 85%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 114
  Text bytes (binary data)   0
  Colors                     0
  Comments                   18
  Duplicate points           0
  Faces                      60
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     36
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 180 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000038
  Maximum face area is 0.001659

FACE_NULL_DELETE
  There are a total of 60 faces.
  Of these, 60 passed the order test.

VERTEX_NORMAL_SET: Recomputed 180 face vertex normals.

FACE_NORMAL_AVE: Recomputed 60 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.117370 0.123288 0.140370 0.023000
Y  -0.057734 0.018040 0.071865 0.129599
Z  -0.072087 0.001786 0.072046 0.144133

IV_WRITE - Wrote 556 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 114
  Text bytes (binary data)   0
  Colors                     0
  Comments                   18
  Duplicate points           0
  Faces                      60
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     36
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 180 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000038
  Maximum face area is 0.001659

FACE_NULL_DELETE
  There are a total of 60 faces.
  Of these, 60 passed the order test.

VERTEX_NORMAL_SET: Recomputed 180 face vertex normals.

FACE_NORMAL_AVE: Recomputed 60 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.117370 0.123288 0.140370 0.023000
Y  -0.057734 0.018040 0.071865 0.129599
Z  -0.072087 0.001786 0.072046 0.144133

STLA_WRITE - Wrote 422 text lines.
[ 87%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.iv
[ 87%] Generating /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.obj /<<BUILDDIR>>package/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 213
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      116
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     70
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 348 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.001913

FACE_NULL_DELETE
  There are a total of 116 faces.
  Of these, 116 passed the order test.

VERTEX_NORMAL_SET: Recomputed 348 face vertex normals.

FACE_NORMAL_AVE: Recomputed 116 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.118870 0.122454 0.140370 0.021500
Y  -0.072178 -0.002018 0.072178 0.144356
Z  -0.072178 0.002041 0.072178 0.144356

STLB_WRITE - Wrote 5884 bytes.
[ 88%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.stla
[ 88%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 213
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      116
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     70
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 348 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.001913

FACE_NULL_DELETE
  There are a total of 116 faces.
  Of these, 116 passed the order test.

VERTEX_NORMAL_SET: Recomputed 348 face vertex normals.

FACE_NORMAL_AVE: Recomputed 116 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.118870 0.122454 0.140370 0.021500
Y  -0.072178 -0.002018 0.072178 0.144356
Z  -0.072178 0.002041 0.072178 0.144356

STLA_WRITE - Wrote 814 text lines.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 213
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      116
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     70
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 348 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.001913

FACE_NULL_DELETE
  There are a total of 116 faces.
  Of these, 116 passed the order test.

VERTEX_NORMAL_SET: Recomputed 348 face vertex normals.

FACE_NORMAL_AVE: Recomputed 116 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  0.118870 0.122454 0.140370 0.021500
Y  -0.072178 -0.002018 0.072178 0.144356
Z  -0.072178 0.002041 0.072178 0.144356

IV_WRITE - Wrote 1016 text lines;
[ 89%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/hok_tilt_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000070
  Maximum face area is 0.002319

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.054966 0.002478 0.054972 0.109938
Y  -0.047000 -0.000980 0.047000 0.094000
Z  -0.033250 0.007017 0.056050 0.089300

STLB_WRITE - Wrote 5084 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000070
  Maximum face area is 0.002319

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.054966 0.002478 0.054972 0.109938
Y  -0.047000 -0.000980 0.047000 0.094000
Z  -0.033250 0.007017 0.056050 0.089300

STLA_WRITE - Wrote 702 text lines.
[ 89%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.stlb
[ 90%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000070
  Maximum face area is 0.002319

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.054966 0.002478 0.054972 0.109938
Y  -0.047000 -0.000980 0.047000 0.094000
Z  -0.033250 0.007017 0.056050 0.089300

IV_WRITE - Wrote 884 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.stla
[ 91%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.iv
[ 91%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000811
  Maximum face area is 0.006614

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.060715 0.000902 0.056297 0.117012
Y  -0.081500 -0.000198 0.081500 0.163000
Z  -0.056318 0.007191 0.063856 0.120174

STLB_WRITE - Wrote 1084 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000811
  Maximum face area is 0.006614

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.060715 0.000902 0.056297 0.117012
Y  -0.081500 -0.000198 0.081500 0.163000
Z  -0.056318 0.007191 0.063856 0.120174

STLA_WRITE - Wrote 142 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 44
  Text bytes (binary data)   0
  Colors                     0
  Comments                   12
  Duplicate points           0
  Faces                      20
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     12
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 60 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000811
  Maximum face area is 0.006614

FACE_NULL_DELETE
  There are a total of 20 faces.
  Of these, 20 passed the order test.

VERTEX_NORMAL_SET: Recomputed 60 face vertex normals.

FACE_NORMAL_AVE: Recomputed 20 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.060715 0.000902 0.056297 0.117012
Y  -0.081500 -0.000198 0.081500 0.163000
Z  -0.056318 0.007191 0.063856 0.120174

IV_WRITE - Wrote 228 text lines;
[ 91%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.stla
[ 91%] Generating /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.obj /<<BUILDDIR>>package/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 195
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      104
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     64
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 312 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000013
  Maximum face area is 0.009077

FACE_NULL_DELETE
  There are a total of 104 faces.
  Of these, 104 passed the order test.

VERTEX_NORMAL_SET: Recomputed 312 face vertex normals.

FACE_NORMAL_AVE: Recomputed 104 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.063468 0.003388 0.052558 0.116026
Y  -0.081316 -0.001190 0.081316 0.162632
Z  -0.058179 0.019176 0.065459 0.123638

STLB_WRITE - Wrote 5284 bytes.
[ 92%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 195
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      104
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     64
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 312 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000013
  Maximum face area is 0.009077

FACE_NULL_DELETE
  There are a total of 104 faces.
  Of these, 104 passed the order test.

VERTEX_NORMAL_SET: Recomputed 312 face vertex normals.

FACE_NORMAL_AVE: Recomputed 104 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.063468 0.003388 0.052558 0.116026
Y  -0.081316 -0.001190 0.081316 0.162632
Z  -0.058179 0.019176 0.065459 0.123638

STLA_WRITE - Wrote 730 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 195
  Text bytes (binary data)   0
  Colors                     0
  Comments                   27
  Duplicate points           0
  Faces                      104
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     64
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 312 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000013
  Maximum face area is 0.009077

FACE_NULL_DELETE
  There are a total of 104 faces.
  Of these, 104 passed the order test.

VERTEX_NORMAL_SET: Recomputed 312 face vertex normals.

FACE_NORMAL_AVE: Recomputed 104 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.063468 0.003388 0.052558 0.116026
Y  -0.081316 -0.001190 0.081316 0.162632
Z  -0.058179 0.019176 0.065459 0.123638

IV_WRITE - Wrote 920 text lines;
[ 92%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.stla
[ 92%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000007
  Maximum face area is 0.058796

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.257424 -0.105469 0.115000 0.372424
Y  -0.258270 -0.002682 0.259963 0.518233
Z  -0.498150 -0.138584 0.302500 0.800650

STLB_WRITE - Wrote 5084 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000007
  Maximum face area is 0.058796

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.257424 -0.105469 0.115000 0.372424
Y  -0.258270 -0.002682 0.259963 0.518233
Z  -0.498150 -0.138584 0.302500 0.800650

STLA_WRITE - Wrote 702 text lines.
[ 92%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.stlb
[ 93%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.stla
[ 94%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 242
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      132
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     80
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 396 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000003
  Maximum face area is 0.074237
  Marked 2 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 132 faces.
  Of these, 130 passed the order test.

VERTEX_NORMAL_SET: Recomputed 390 face vertex normals.

FACE_NORMAL_AVE: Recomputed 130 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.292938 -0.157449 0.113929 0.406867
Y  -0.246629 0.005890 0.261478 0.508107
Z  -0.506001 -0.012018 0.316374 0.822375

STLB_WRITE - Wrote 6584 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000007
  Maximum face area is 0.058796

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.257424 -0.105469 0.115000 0.372424
Y  -0.258270 -0.002682 0.259963 0.518233
Z  -0.498150 -0.138584 0.302500 0.800650

IV_WRITE - Wrote 884 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 242
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      132
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     80
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 396 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000003
  Maximum face area is 0.074237
  Marked 2 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 132 faces.
  Of these, 130 passed the order test.

VERTEX_NORMAL_SET: Recomputed 390 face vertex normals.

FACE_NORMAL_AVE: Recomputed 130 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.292938 -0.157449 0.113929 0.406867
Y  -0.246629 0.005890 0.261478 0.508107
Z  -0.506001 -0.012018 0.316374 0.822375

STLA_WRITE - Wrote 912 text lines.
[ 95%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.stla
[ 95%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 242
  Text bytes (binary data)   0
  Colors                     0
  Comments                   30
  Duplicate points           0
  Faces                      132
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     80
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 396 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000003
  Maximum face area is 0.074237
  Marked 2 tiny faces for deletion.

FACE_NULL_DELETE
  There are a total of 132 faces.
  Of these, 130 passed the order test.

VERTEX_NORMAL_SET: Recomputed 390 face vertex normals.

FACE_NORMAL_AVE: Recomputed 130 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.292938 -0.157449 0.113929 0.406867
Y  -0.246629 0.005890 0.261478 0.508107
Z  -0.506001 -0.012018 0.316374 0.822375

IV_WRITE - Wrote 1134 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.stlb
[ 95%] Generating /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.obj /<<BUILDDIR>>package/meshes/torso_v0/convex/torso_lift_L_convex.iv
[ 95%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.stlb

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 172
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      92
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     56
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 276 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000043
  Maximum face area is 0.075114

FACE_NULL_DELETE
  There are a total of 92 faces.
  Of these, 92 passed the order test.

VERTEX_NORMAL_SET: Recomputed 276 face vertex normals.

FACE_NORMAL_AVE: Recomputed 92 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.287606 -0.189491 0.111556 0.399162
Y  -0.259041 0.024995 0.259041 0.518082
Z  -0.506000 -0.002773 0.314034 0.820034

STLA_WRITE - Wrote 646 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 172
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      92
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     56
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 276 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000043
  Maximum face area is 0.075114

FACE_NULL_DELETE
  There are a total of 92 faces.
  Of these, 92 passed the order test.

VERTEX_NORMAL_SET: Recomputed 276 face vertex normals.

FACE_NORMAL_AVE: Recomputed 92 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.287606 -0.189491 0.111556 0.399162
Y  -0.259041 0.024995 0.259041 0.518082
Z  -0.506000 -0.002773 0.314034 0.820034

STLB_WRITE - Wrote 4684 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 172
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      92
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     56
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 276 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000043
  Maximum face area is 0.075114

FACE_NULL_DELETE
  There are a total of 92 faces.
  Of these, 92 passed the order test.

VERTEX_NORMAL_SET: Recomputed 276 face vertex normals.

FACE_NORMAL_AVE: Recomputed 92 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.287606 -0.189491 0.111556 0.399162
Y  -0.259041 0.024995 0.259041 0.518082
Z  -0.506000 -0.002773 0.314034 0.820034

IV_WRITE - Wrote 820 text lines;
[ 95%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 324
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      180
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     108
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 540 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.003122

FACE_NULL_DELETE
  There are a total of 180 faces.
  Of these, 180 passed the order test.

VERTEX_NORMAL_SET: Recomputed 540 face vertex normals.

FACE_NORMAL_AVE: Recomputed 180 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.080296 0.011930 0.092452 0.172748
Y  -0.046731 0.000443 0.045345 0.092076
Z  -0.079990 -0.005612 0.080159 0.160149

STLB_WRITE - Wrote 9084 bytes.
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.stla
[ 96%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.stlb
[ 96%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/elbow_flex_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 324
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      180
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     108
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 540 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.003122

FACE_NULL_DELETE
  There are a total of 180 faces.
  Of these, 180 passed the order test.

VERTEX_NORMAL_SET: Recomputed 540 face vertex normals.

FACE_NORMAL_AVE: Recomputed 180 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.080296 0.011930 0.092452 0.172748
Y  -0.046731 0.000443 0.045345 0.092076
Z  -0.079990 -0.005612 0.080159 0.160149

STLA_WRITE - Wrote 1262 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.000642

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.082593 0.106505 0.131005
Y  -0.041516 -0.001231 0.040521 0.082037
Z  -0.041300 0.001683 0.042800 0.084100

STLB_WRITE - Wrote 5084 bytes.
[ 96%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 324
  Text bytes (binary data)   0
  Colors                     0
  Comments                   36
  Duplicate points           0
  Faces                      180
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     108
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 540 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000001
  Maximum face area is 0.003122

FACE_NULL_DELETE
  There are a total of 180 faces.
  Of these, 180 passed the order test.

VERTEX_NORMAL_SET: Recomputed 540 face vertex normals.

FACE_NORMAL_AVE: Recomputed 180 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.080296 0.011930 0.092452 0.172748
Y  -0.046731 0.000443 0.045345 0.092076
Z  -0.079990 -0.005612 0.080159 0.160149

IV_WRITE - Wrote 1540 text lines;
[ 96%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.stlb
[ 96%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_convex.iv
[ 97%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.000642

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.082593 0.106505 0.131005
Y  -0.041516 -0.001231 0.040521 0.082037
Z  -0.041300 0.001683 0.042800 0.084100

STLA_WRITE - Wrote 702 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.000779

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.084562 0.106500 0.131000
Y  -0.041156 0.000187 0.040999 0.082155
Z  -0.040987 -0.000776 0.040987 0.081974

STLB_WRITE - Wrote 5084 bytes.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.000779

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.084562 0.106500 0.131000
Y  -0.041156 0.000187 0.040999 0.082155
Z  -0.040987 -0.000776 0.040987 0.081974

STLA_WRITE - Wrote 702 text lines.
[ 98%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.stlb
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.stlb
[ 99%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.000642

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.082593 0.106505 0.131005
Y  -0.041516 -0.001231 0.040521 0.082037
Z  -0.041300 0.001683 0.042800 0.084100

IV_WRITE - Wrote 884 text lines;
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/forearm_roll_L_convex.iv
[ 99%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.stla
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.stla

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 394
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     132
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.008276

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.052245 0.226280 0.483713 0.535958
Y  -0.076613 -0.000180 0.075102 0.151715
Z  -0.086002 -0.001766 0.082547 0.168549

STLB_WRITE - Wrote 11084 bytes.
[100%] Generating /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.iv
/opt/ros/one/bin/ivcon /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.obj /<<BUILDDIR>>package/meshes/upper_arm_v0/convex/upper_arm_convex.iv

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 184
  Text bytes (binary data)   0
  Colors                     0
  Comments                   24
  Duplicate points           0
  Faces                      100
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     60
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 300 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.000779

FACE_NULL_DELETE
  There are a total of 100 faces.
  Of these, 100 passed the order test.

VERTEX_NORMAL_SET: Recomputed 300 face vertex normals.

FACE_NORMAL_AVE: Recomputed 100 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.024500 0.084562 0.106500 0.131000
Y  -0.041156 0.000187 0.040999 0.082155
Z  -0.040987 -0.000776 0.040987 0.081974

IV_WRITE - Wrote 884 text lines;

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 394
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     132
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.008276

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.052245 0.226280 0.483713 0.535958
Y  -0.076613 -0.000180 0.075102 0.151715
Z  -0.086002 -0.001766 0.082547 0.168549

STLA_WRITE - Wrote 1542 text lines.

DATA_REPORT - The input file contains:

  Bad data items             0
  Text lines                 394
  Text bytes (binary data)   0
  Colors                     0
  Comments                   42
  Duplicate points           0
  Faces                      220
  Groups                     0
  Vertices per face, maximum 3
  Line items                 0
  Points                     132
  Objects                    0

DATA_CHECK - Data checked.

EDGE_NULL_DELETE:
  There are a total of 660 edges.
  Of these, 0 were of zero length, and deleted.

FACE_AREA_SET:
  Minimum face area is 0.000012
  Maximum face area is 0.008276

FACE_NULL_DELETE
  There are a total of 220 faces.
  Of these, 220 passed the order test.

VERTEX_NORMAL_SET: Recomputed 660 face vertex normals.

FACE_NORMAL_AVE: Recomputed 220 face normals
  by averaging face vertex normals.

COR3_RANGE - Data range:

   Minimum   Average   Maximum  Range

X  -0.052245 0.226280 0.483713 0.535958
Y  -0.076613 -0.000180 0.075102 0.151715
Z  -0.086002 -0.001766 0.082547 0.168549

IV_WRITE - Wrote 1868 text lines;
make[4]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
[100%] Built target media_files
make[3]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
/usr/bin/cmake -E cmake_progress_start /<<BUILDDIR>>package/.obj-x86_64-linux-gnu/CMakeFiles 0
make[2]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
make[1]: Leaving directory '/<<BUILDDIR>>package'
	rm -f debian/ros-one-pr2-description.debhelper.log
   debian/rules override_dh_auto_test
make[1]: Entering directory '/<<BUILDDIR>>package'
# In case we're installing to a non-standard location, look for a setup.sh
# in the install tree that was dropped by catkin, and source it.  It will
# set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH.
echo -- Running tests. Even if one of them fails the build is not canceled.
-- Running tests. Even if one of them fails the build is not canceled.
if [ -f "/opt/ros/one/setup.sh" ]; then . "/opt/ros/one/setup.sh"; fi && \
dh_auto_test || true
make[1]: Leaving directory '/<<BUILDDIR>>package'
   create-stamp debian/debhelper-build-stamp
 fakeroot debian/rules binary
dh binary -v --buildsystem=cmake --builddirectory=.obj-x86_64-linux-gnu
   dh_testroot -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_prep -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	rm -f -- debian/ros-one-pr2-description.substvars
	rm -fr -- debian/.debhelper/generated/ros-one-pr2-description/ debian/ros-one-pr2-description/ debian/tmp/
   debian/rules override_dh_auto_install
make[1]: Entering directory '/<<BUILDDIR>>package'
# In case we're installing to a non-standard location, look for a setup.sh
# in the install tree that was dropped by catkin, and source it.  It will
# set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH.
if [ -f "/opt/ros/one/setup.sh" ]; then . "/opt/ros/one/setup.sh"; fi && \
dh_auto_install
	install -m0755 -d /<<BUILDDIR>>package/debian/ros-one-pr2-description
	cd .obj-x86_64-linux-gnu && make -j4 install DESTDIR=/<<BUILDDIR>>package/debian/ros-one-pr2-description AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true"
make[2]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
/usr/bin/cmake -S/<<BUILDDIR>>package -B/<<BUILDDIR>>package/.obj-x86_64-linux-gnu --check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start /<<BUILDDIR>>package/.obj-x86_64-linux-gnu/CMakeFiles /<<BUILDDIR>>package/.obj-x86_64-linux-gnu//CMakeFiles/progress.marks
make  -f CMakeFiles/Makefile2 all
make[3]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
make  -f CMakeFiles/media_files.dir/build.make CMakeFiles/media_files.dir/depend
make[4]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
cd /<<BUILDDIR>>package/.obj-x86_64-linux-gnu && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /<<BUILDDIR>>package /<<BUILDDIR>>package /<<BUILDDIR>>package/.obj-x86_64-linux-gnu /<<BUILDDIR>>package/.obj-x86_64-linux-gnu /<<BUILDDIR>>package/.obj-x86_64-linux-gnu/CMakeFiles/media_files.dir/DependInfo.cmake --color=
make[4]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
make  -f CMakeFiles/media_files.dir/build.make CMakeFiles/media_files.dir/build
make[4]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
make[4]: Nothing to be done for 'CMakeFiles/media_files.dir/build'.
make[4]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
[100%] Built target media_files
make[3]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
/usr/bin/cmake -E cmake_progress_start /<<BUILDDIR>>package/.obj-x86_64-linux-gnu/CMakeFiles 0
make  -f CMakeFiles/Makefile2 preinstall
make[3]: Entering directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
make[3]: Nothing to be done for 'preinstall'.
make[3]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
Install the project...
/usr/bin/cmake -P cmake_install.cmake
-- Install configuration: "None"
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/lib/pkgconfig/pr2_description.pc
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/cmake/pr2_descriptionConfig.cmake
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/cmake/pr2_descriptionConfig-version.cmake
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/package.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/.gitignore
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/iv/torso_lift.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/iv/torso.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/iv/torso_lift_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/torso.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_roll.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm.jpg
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_flex.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_flex.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/.gitignore
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/wrist_flex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/wrist_roll.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/wrist_roll_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/forearm.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_roll_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/upper_finger_l.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_pad2_r.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/palm_H_Color_100430.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_l.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/float_H_UV_100430.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_H_UV_100430.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_r.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_H_Color_100430.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/palm_H_UV_100430.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_H_UV_100430.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/.gitignore
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/finger_tip_r.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/l_floating.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/finger_tip_pad2_l.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/l_finger_tip.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/finger_tip_l.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/finger_tip_pad2_r.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/upper_finger_r.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/gripper_palm.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/l_finger.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/upper_finger_l.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_float_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_float_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/fingertip_H_Color_100430.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_pad2_l.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_float.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/upper_finger_r.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/float_H_Color_100430.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_floating.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/kinect_mount.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/kinect.tga
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/kinect.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/kinect_color.tga
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/115x100_swept_fwd--coarse.STL
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/115x100_swept_back--coarse.STL
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/68-04546_Kinect_Sensor--coarse.STL
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/Prosilica_w_Lens--coarse.STL
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/115x100_swept_fwd_no_sensors--coarse.STL
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/115x100_swept_back_no_sensors--coarse.STL
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect2_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect2_v0/kinect2_assembly.STL
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/sensors/kinect2_v0/kinect2_assembly.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_pan.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_pan_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_pan_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_pan_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color_yellow.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color_red.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_green.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/.gitignore
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/iv/head_tilt.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/iv/head_pan_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/iv/head_pan.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/iv/head_tilt_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_pan.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/.gitignore
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/shoulder_pan.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/upper_arm_roll_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/shoulder_yaw.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/shoulder_lift.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/upper_arm_roll.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_yaw.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/base.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel_h.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/base_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/base_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/.gitignore
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/iv/wheel.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/iv/base.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/iv/base_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/iv/pr2_wheel.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/iv/caster.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/iv/caster_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel_h_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/caster.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/base.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/base_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/pr2_wheel.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/caster_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/forearm_roll_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/forearm_roll.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/.gitignore
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/forearm_roll_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/elbow_flex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/upper_arm.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/forearm_roll.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm.jpg
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo_normals.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/.gitignore
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/iv/hok_tilt.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/iv/tilting_hokuyo.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/iv/tilting_hokuyo_L.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/hok_tilt.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.dae
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.stlb
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt_convex.stla
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt_convex.iv
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.obj
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt.xml
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo_color.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo_L.stl
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/gazebo
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/gazebo/gazebo.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/materials
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/materials/textures
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/materials/textures/pr2_wheel_left.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/materials/textures/pr2_wheel_right.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/materials/textures/pr2_caster_texture.png
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/robots
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/robots/pr2_no_kinect.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/robots/pr2_se.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/robots/pr2_no_arms.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/robots/pr2.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/robots/upload_pr2.launch
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/robots/README
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/documents
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/documents/100416_floating_link.ppt
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/documents/head_pan_and_tilt_mass_props.zip
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/documents/090224_link_data_with_motor_info.xls
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/torso_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/torso_v0/torso.transmission.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/torso_v0/torso.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/torso_v0/torso.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/forearm_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/forearm_v0/forearm.transmission.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/forearm_v0/forearm.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/forearm_v0/forearm.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/gripper_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/gripper_v0/gripper.transmission.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/gripper_v0/gripper.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/gripper_v0/gripper.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/materials.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/hokuyo_lx30_laser.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/projector_wg6802418.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/wge100_camera.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/prosilica_gc2450_camera.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/kinect2.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/head_sensor_package.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/kinect_prosilica_camera.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/double_stereo_camera.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/double_stereo_camera.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/head_sensor_package.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/wge100_camera.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/hokuyo_lx30_laser.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/kinect2.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/stereo_camera.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/kinect_prosilica_camera.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/microstrain_3dmgx2_imu.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/kinect_camera.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/projector_wg6802418.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/prosilica_gc2450_camera.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/stereo_camera.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/microstrain_3dmgx2_imu.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/sensors/kinect_camera.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/head_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/head_v0/head.transmission.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/head_v0/head.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/head_v0/head.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/shoulder_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/shoulder_v0/shoulder.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/shoulder_v0/shoulder.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/shoulder_v0/shoulder.transmission.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/common.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/base_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/base_v0/base.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/base_v0/base.transmission.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/base_v0/base.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/upper_arm_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/upper_arm_v0/upper_arm.transmission.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/upper_arm_v0/upper_arm.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/upper_arm_v0/upper_arm.urdf.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/tilting_laser_v0
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/tilting_laser_v0/tilting_laser.gazebo.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/tilting_laser_v0/tilting_laser.transmission.xacro
-- Installing: /<<BUILDDIR>>package/debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/urdf/tilting_laser_v0/tilting_laser.urdf.xacro
make[2]: Leaving directory '/<<BUILDDIR>>package/.obj-x86_64-linux-gnu'
make[1]: Leaving directory '/<<BUILDDIR>>package'
   dh_installdocs -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	install -m0755 -d debian/ros-one-pr2-description/usr/share/doc/ros-one-pr2-description
	install -p -m0644 debian/copyright debian/ros-one-pr2-description/usr/share/doc/ros-one-pr2-description/copyright
   dh_installchangelogs -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	install -m0755 -d debian/ros-one-pr2-description/usr/share/doc/ros-one-pr2-description
	install -p -m0644 debian/.debhelper/generated/ros-one-pr2-description/dh_installchangelogs.dch.trimmed debian/ros-one-pr2-description/usr/share/doc/ros-one-pr2-description/changelog.Debian
	install -p -m0644 ./CHANGELOG.rst debian/ros-one-pr2-description/usr/share/doc/ros-one-pr2-description/changelog
   dh_installinit -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_perl -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_link -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_strip_nondeterminism -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	Using 1662508800 as canonical time
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_float_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/fingertip_H_Color_100430.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/float_H_Color_100430.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_pan_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_pan_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color_yellow.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color_red.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_green.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/palm_H_Color_100430.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_H_Color_100430.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/gripper_v0/l_float_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/base_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/base_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/base_v0/wheel_h_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo_normals.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo_color.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/documents/head_pan_and_tilt_mass_props.zip using File::StripNondeterminism::handlers::zip
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/materials/textures/pr2_wheel_left.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/materials/textures/pr2_wheel_right.png using File::StripNondeterminism::handlers::png
	Normalizing debian/ros-one-pr2-description/opt/ros/one/share/pr2_description/materials/textures/pr2_caster_texture.png using File::StripNondeterminism::handlers::png
   dh_compress -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	cd debian/ros-one-pr2-description
	chmod a-x usr/share/doc/ros-one-pr2-description/changelog usr/share/doc/ros-one-pr2-description/changelog.Debian
	gzip -9nf usr/share/doc/ros-one-pr2-description/changelog usr/share/doc/ros-one-pr2-description/changelog.Debian
	cd '/<<BUILDDIR>>package'
   dh_fixperms -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	find debian/ros-one-pr2-description -true -print0 2>/dev/null | xargs -0r chown --no-dereference 0:0
	find debian/ros-one-pr2-description ! -type l -a -true -a -true -print0 2>/dev/null | xargs -0r chmod go=rX,u+rw,a-s
	find debian/ros-one-pr2-description/usr/share/doc -type f -a -true -a ! -regex 'debian/ros-one-pr2-description/usr/share/doc/[^/]*/examples/.*' -print0 2>/dev/null | xargs -0r chmod 0644
	find debian/ros-one-pr2-description/usr/share/doc -type d -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0755
	find debian/ros-one-pr2-description -type f \( -name '*.so.*' -o -name '*.so' -o -name '*.la' -o -name '*.a' -o -name '*.js' -o -name '*.css' -o -name '*.scss' -o -name '*.sass' -o -name '*.jpeg' -o -name '*.jpg' -o -name '*.png' -o -name '*.gif' -o -name '*.cmxs' -o -name '*.node' \) -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0644
   dh_missing -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_strip -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
   dh_makeshlibs -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	rm -f debian/ros-one-pr2-description/DEBIAN/shlibs
	rm -f debian/ros-one-pr2-description.debhelper.log
   debian/rules override_dh_shlibdeps
make[1]: Entering directory '/<<BUILDDIR>>package'
# In case we're installing to a non-standard location, look for a setup.sh
# in the install tree that was dropped by catkin, and source it.  It will
# set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH.
if [ -f "/opt/ros/one/setup.sh" ]; then . "/opt/ros/one/setup.sh"; fi && \
dh_shlibdeps -l/<<BUILDDIR>>package/debian/ros-one-pr2-description//opt/ros/one/lib/
make[1]: Leaving directory '/<<BUILDDIR>>package'
   dh_installdeb -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	install -m0755 -d debian/ros-one-pr2-description/DEBIAN
   dh_gencontrol -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	install -m0755 -d debian/ros-one-pr2-description/DEBIAN
	echo misc:Depends= >> debian/ros-one-pr2-description.substvars
	echo misc:Pre-Depends= >> debian/ros-one-pr2-description.substvars
	dpkg-gencontrol -pros-one-pr2-description -ldebian/changelog -Tdebian/ros-one-pr2-description.substvars -Pdebian/ros-one-pr2-description
dpkg-gencontrol: warning: Depends field of package ros-one-pr2-description: substitution variable ${shlibs:Depends} used, but is not defined
	chmod 0644 -- debian/ros-one-pr2-description/DEBIAN/control
	chown 0:0 -- debian/ros-one-pr2-description/DEBIAN/control
   dh_md5sums -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	install -m0755 -d debian/ros-one-pr2-description/DEBIAN
	cd debian/ros-one-pr2-description >/dev/null && xargs -r0 md5sum | perl -pe 'if (s@^\\@@) { s/\\\\/\\/g; }' > DEBIAN/md5sums
	chmod 0644 -- debian/ros-one-pr2-description/DEBIAN/md5sums
	chown 0:0 -- debian/ros-one-pr2-description/DEBIAN/md5sums
   dh_builddeb -O-v -O--buildsystem=cmake -O--builddirectory=.obj-x86_64-linux-gnu
	dpkg-deb --build debian/ros-one-pr2-description ..
dpkg-deb: building package 'ros-one-pr2-description' in '../ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.deb'.
 dpkg-genbuildinfo --build=binary -O../ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.buildinfo
 dpkg-genchanges --build=binary -O../ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
 dpkg-source --after-build .
dpkg-source: info: using options from package/debian/source/options: --auto-commit
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2025-12-06T05:54:50Z

Finished
--------

I: Built successfully

+------------------------------------------------------------------------------+
| Changes                                      Sat, 06 Dec 2025 05:54:51 +0000 |
+------------------------------------------------------------------------------+


ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.changes:
-------------------------------------------------------------------------

Format: 1.8
Date: Wed, 07 Sep 2022 00:00:00 -0000
Source: ros-one-pr2-description
Binary: ros-one-pr2-description
Built-For-Profiles: nocheck
Architecture: amd64
Version: 1.13.1-2-g9a8e4fb-2025.12.06.05.52
Distribution: bookworm
Urgency: high
Maintainer: ROS Orphaned Package Maintainers <ros-orphaned-packages@googlegroups.com>
Changed-By: ROS Orphaned Package Maintainers <ros-orphaned-packages@googlegroups.com>
Description:
 ros-one-pr2-description - This package contains the description (mechanical, kinematic, vis
Changes:
 ros-one-pr2-description (1.13.1-2-g9a8e4fb-2025.12.06.05.52) bookworm; urgency=high
 .
   * allow pr2.urdf.xacro to accept customized calibration values (#285 <https://github.com/PR2/pr2_common/issues/285>)
     If 0.0, use the default values. (This retains backward compatibility)
     If not 0.0, use the passed values. (Enable custom calibration values for all macro instantiations
     Using 0.0 to trigger the old defaults is necessary because some default values need to be computed from other parameters.
   * Contributors: Shuang Li
Checksums-Sha1:
 5bbed712cbc94134e31e70841cc5bebbbbf45559 7532 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.buildinfo
 f5b01179a2d32b5b149d36076c5c0b6099c55011 17781956 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.deb
Checksums-Sha256:
 a02c4e7b688a0050071c20a0c61ff00d582f1a979cf58edadd705b6def77ac8e 7532 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.buildinfo
 213874507b6083c9720b2faabc4a040ec4b0cf6992d1cef4b5a69225674b96e3 17781956 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.deb
Files:
 42da81598cde5fcee5d011cb81721fce 7532 misc optional ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.buildinfo
 f559e1b91c015f1c4da06a5c18ddb94e 17781956 misc optional ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.deb

+------------------------------------------------------------------------------+
| Buildinfo                                    Sat, 06 Dec 2025 05:54:51 +0000 |
+------------------------------------------------------------------------------+

Format: 1.0
Source: ros-one-pr2-description
Binary: ros-one-pr2-description
Architecture: amd64
Version: 1.13.1-2-g9a8e4fb-2025.12.06.05.52
Checksums-Md5:
 f559e1b91c015f1c4da06a5c18ddb94e 17781956 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.deb
Checksums-Sha1:
 f5b01179a2d32b5b149d36076c5c0b6099c55011 17781956 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.deb
Checksums-Sha256:
 213874507b6083c9720b2faabc4a040ec4b0cf6992d1cef4b5a69225674b96e3 17781956 ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.deb
Build-Origin: Debian
Build-Architecture: amd64
Build-Date: Sat, 06 Dec 2025 05:54:50 +0000
Build-Path: /<<BUILDDIR>>package
Build-Tainted-By:
 merged-usr-via-aliased-dirs
Installed-Build-Depends:
 autoconf (= 2.71-3),
 automake (= 1:1.16.5-1.3),
 autopoint (= 0.21-12),
 autotools-dev (= 20220109.1),
 base-files (= 12.4+deb12u12),
 base-passwd (= 3.6.1),
 bash (= 5.2.15-2+b9),
 binutils (= 2.40-2),
 binutils-common (= 2.40-2),
 binutils-x86-64-linux-gnu (= 2.40-2),
 bsdextrautils (= 2.38.1-5+deb12u3),
 bsdutils (= 1:2.38.1-5+deb12u3),
 build-essential (= 12.9),
 bzip2 (= 1.0.8-5+b1),
 catkin (= 0.8.10-9),
 cmake (= 3.25.1-1),
 cmake-data (= 3.25.1-1),
 cmake-extras (= 1.6-1),
 coreutils (= 9.1-1),
 cpp (= 4:12.2.0-3),
 cpp-12 (= 12.2.0-14+deb12u1),
 dash (= 0.5.12-2),
 debconf (= 1.5.82),
 debhelper (= 13.11.4),
 debianutils (= 5.7-0.5~deb12u1),
 dh-autoreconf (= 20),
 dh-strip-nondeterminism (= 1.13.1-1),
 diffutils (= 1:3.8-4),
 docutils-common (= 0.19+dfsg-6),
 dpkg (= 1.21.22),
 dpkg-dev (= 1.21.22),
 dwz (= 0.15-1),
 file (= 1:5.44-3),
 findutils (= 4.9.0-4),
 g++ (= 4:12.2.0-3),
 g++-12 (= 12.2.0-14+deb12u1),
 gcc (= 4:12.2.0-3),
 gcc-12 (= 12.2.0-14+deb12u1),
 gcc-12-base (= 12.2.0-14+deb12u1),
 gettext (= 0.21-12),
 gettext-base (= 0.21-12),
 googletest (= 1.12.1-0.2),
 grep (= 3.8-5),
 groff-base (= 1.22.4-10),
 gzip (= 1.12-1),
 hostname (= 3.23+nmu1),
 init-system-helpers (= 1.65.2+deb12u1),
 intltool-debian (= 0.35.0+20060710.6),
 libacl1 (= 2.3.1-3),
 libarchive-zip-perl (= 1.68-1),
 libarchive13 (= 3.6.2-1+deb12u3),
 libasan8 (= 12.2.0-14+deb12u1),
 libatomic1 (= 12.2.0-14+deb12u1),
 libattr1 (= 1:2.5.1-4),
 libaudit-common (= 1:3.0.9-1),
 libaudit1 (= 1:3.0.9-1),
 libbinutils (= 2.40-2),
 libblkid1 (= 2.38.1-5+deb12u3),
 libbrotli1 (= 1.0.9-2+b6),
 libbz2-1.0 (= 1.0.8-5+b1),
 libc-bin (= 2.36-9+deb12u13),
 libc-dev-bin (= 2.36-9+deb12u13),
 libc6 (= 2.36-9+deb12u13),
 libc6-dev (= 2.36-9+deb12u13),
 libcap-ng0 (= 0.8.3-1+b3),
 libcap2 (= 1:2.66-4+deb12u2),
 libcc1-0 (= 12.2.0-14+deb12u1),
 libcom-err2 (= 1.47.0-2+b2),
 libcrypt-dev (= 1:4.4.33-2),
 libcrypt1 (= 1:4.4.33-2),
 libctf-nobfd0 (= 2.40-2),
 libctf0 (= 2.40-2),
 libcurl4 (= 7.88.1-10+deb12u14),
 libdb5.3 (= 5.3.28+dfsg2-1),
 libdebconfclient0 (= 0.270),
 libdebhelper-perl (= 13.11.4),
 libdpkg-perl (= 1.21.22),
 libelf1 (= 0.188-2.1),
 libexpat1 (= 2.5.0-1+deb12u2),
 libffi8 (= 3.4.4-1),
 libfile-find-rule-perl (= 0.34-4~deb12u1),
 libfile-stripnondeterminism-perl (= 1.13.1-1),
 libgcc-12-dev (= 12.2.0-14+deb12u1),
 libgcc-s1 (= 12.2.0-14+deb12u1),
 libgcrypt20 (= 1.10.1-3),
 libgdbm-compat4 (= 1.23-3),
 libgdbm6 (= 1.23-3),
 libgmock-dev (= 1.12.1-0.2),
 libgmp10 (= 2:6.2.1+dfsg1-1.1),
 libgnutls30 (= 3.7.9-2+deb12u5),
 libgomp1 (= 12.2.0-14+deb12u1),
 libgpg-error0 (= 1.46-1),
 libgprofng0 (= 2.40-2),
 libgssapi-krb5-2 (= 1.20.1-2+deb12u4),
 libgtest-dev (= 1.12.1-0.2),
 libhogweed6 (= 3.8.1-2),
 libicu72 (= 72.1-3+deb12u1),
 libidn2-0 (= 2.3.3-1+b1),
 libisl23 (= 0.25-1.1),
 libitm1 (= 12.2.0-14+deb12u1),
 libjansson4 (= 2.14-2),
 libjsoncpp25 (= 1.9.5-4),
 libk5crypto3 (= 1.20.1-2+deb12u4),
 libkeyutils1 (= 1.6.3-2),
 libkrb5-3 (= 1.20.1-2+deb12u4),
 libkrb5support0 (= 1.20.1-2+deb12u4),
 libldap-2.5-0 (= 2.5.13+dfsg-5),
 liblsan0 (= 12.2.0-14+deb12u1),
 liblz4-1 (= 1.9.4-1),
 liblzma5 (= 5.4.1-1),
 libmagic-mgc (= 1:5.44-3),
 libmagic1 (= 1:5.44-3),
 libmd0 (= 1.0.4-2),
 libmount1 (= 2.38.1-5+deb12u3),
 libmpc3 (= 1.3.1-1),
 libmpfr6 (= 4.2.0-1),
 libncursesw6 (= 6.4-4),
 libnettle8 (= 3.8.1-2),
 libnghttp2-14 (= 1.52.0-1+deb12u2),
 libnsl-dev (= 1.3.0-2),
 libnsl2 (= 1.3.0-2),
 libnumber-compare-perl (= 0.03-3),
 libp11-kit0 (= 0.24.1-2),
 libpam-modules (= 1.5.2-6+deb12u1),
 libpam-modules-bin (= 1.5.2-6+deb12u1),
 libpam-runtime (= 1.5.2-6+deb12u1),
 libpam0g (= 1.5.2-6+deb12u1),
 libpcre2-8-0 (= 10.42-1),
 libperl5.36 (= 5.36.0-7+deb12u3),
 libpipeline1 (= 1.5.7-1),
 libpkgconf3 (= 1.8.1-1),
 libproc2-0 (= 2:4.0.2-3),
 libpsl5 (= 0.21.2-1),
 libpython3-stdlib (= 3.11.2-1+b1),
 libpython3.11-minimal (= 3.11.2-6+deb12u6),
 libpython3.11-stdlib (= 3.11.2-6+deb12u6),
 libquadmath0 (= 12.2.0-14+deb12u1),
 libreadline8 (= 8.2-1.3),
 librhash0 (= 1.4.3-3),
 librtmp1 (= 2.4+20151223.gitfa8646d.1-2+b2),
 libsasl2-2 (= 2.1.28+dfsg-10),
 libsasl2-modules-db (= 2.1.28+dfsg-10),
 libseccomp2 (= 2.5.4-1+deb12u1),
 libselinux1 (= 3.4-1+b6),
 libsmartcols1 (= 2.38.1-5+deb12u3),
 libsqlite3-0 (= 3.40.1-2+deb12u2),
 libssh2-1 (= 1.10.0-3+b1),
 libssl3 (= 3.0.17-1~deb12u3),
 libstdc++-12-dev (= 12.2.0-14+deb12u1),
 libstdc++6 (= 12.2.0-14+deb12u1),
 libsub-override-perl (= 0.09-4),
 libsystemd0 (= 252.39-1~deb12u1),
 libtasn1-6 (= 4.19.0-2+deb12u1),
 libtext-glob-perl (= 0.11-3),
 libtinfo6 (= 6.4-4),
 libtirpc-common (= 1.3.3+ds-1),
 libtirpc-dev (= 1.3.3+ds-1),
 libtirpc3 (= 1.3.3+ds-1),
 libtool (= 2.4.7-7~deb12u1),
 libtsan2 (= 12.2.0-14+deb12u1),
 libubsan1 (= 12.2.0-14+deb12u1),
 libuchardet0 (= 0.0.7-1),
 libudev1 (= 252.39-1~deb12u1),
 libunistring2 (= 1.0-2),
 libuuid1 (= 2.38.1-5+deb12u3),
 libuv1 (= 1.44.2-1+deb12u1),
 libxml2 (= 2.9.14+dfsg-1.3~deb12u4),
 libzstd1 (= 1.5.4+dfsg2-5),
 linux-libc-dev (= 6.1.158-1),
 login (= 1:4.13+dfsg1-1+deb12u1),
 m4 (= 1.4.19-3),
 make (= 4.3-4.1),
 man-db (= 2.11.2-2),
 mawk (= 1.3.4.20200120-3.1),
 media-types (= 10.0.0),
 ncurses-base (= 6.4-4),
 ncurses-bin (= 6.4-4),
 patch (= 2.7.6-7),
 perl (= 5.36.0-7+deb12u3),
 perl-base (= 5.36.0-7+deb12u3),
 perl-modules-5.36 (= 5.36.0-7+deb12u3),
 pkg-config (= 1.8.1-1),
 pkgconf (= 1.8.1-1),
 pkgconf-bin (= 1.8.1-1),
 po-debconf (= 1.0.21+nmu1),
 procps (= 2:4.0.2-3),
 python3 (= 3.11.2-1+b1),
 python3-catkin (= 0.8.10-9),
 python3-catkin-pkg (= 0.5.2-5),
 python3-dateutil (= 2.8.2-2),
 python3-distutils (= 3.11.2-3),
 python3-docutils (= 0.19+dfsg-6),
 python3-empy (= 3.3.4-2),
 python3-lib2to3 (= 3.11.2-3),
 python3-minimal (= 3.11.2-1+b1),
 python3-pkg-resources (= 66.1.1-1+deb12u2),
 python3-pyparsing (= 3.0.9-1),
 python3-roman (= 3.3-3),
 python3-setuptools (= 66.1.1-1+deb12u2),
 python3-six (= 1.16.0-4),
 python3.11 (= 3.11.2-6+deb12u6),
 python3.11-minimal (= 3.11.2-6+deb12u6),
 readline-common (= 8.2-1.3),
 ros-environment (= 1.3.2-2),
 ros-one-convex-decomposition (= 0.1.12-3-gb722eb5-2025.12.06.02.50),
 ros-one-ivcon (= 0.1.7-2-g5c97b19-2025.12.06.02.51),
 rpcsvc-proto (= 1.4.3-1),
 sed (= 4.9-1),
 sensible-utils (= 0.0.17+nmu1),
 sgml-base (= 1.31),
 sysvinit-utils (= 3.06-4),
 tar (= 1.34+dfsg-1.2+deb12u1),
 tzdata (= 2025b-0+deb12u2),
 unzip (= 6.0-28),
 usrmerge (= 37~deb12u1),
 util-linux (= 2.38.1-5+deb12u3),
 util-linux-extra (= 2.38.1-5+deb12u3),
 xml-core (= 0.18+nmu1),
 xz-utils (= 5.4.1-1),
 zlib1g (= 1:1.2.13.dfsg-1)
Environment:
 DEB_BUILD_OPTIONS="nocheck parallel=4"
 DEB_BUILD_PROFILES="nocheck"
 LANG="C.UTF-8"
 LC_ALL="C.UTF-8"
 LC_COLLATE="C.UTF-8"
 LD_LIBRARY_PATH="/opt/ros/one/lib:/opt/ros/one/lib/x86_64-linux-gnu"
 SOURCE_DATE_EPOCH="1662508800"


+------------------------------------------------------------------------------+
| Package contents                             Sat, 06 Dec 2025 05:54:51 +0000 |
+------------------------------------------------------------------------------+


ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52_amd64.deb
--------------------------------------------------------------------

 new Debian package, version 2.0.
 size 17781956 bytes: control archive=12196 bytes.
     552 bytes,    11 lines      control              
   55131 bytes,   505 lines      md5sums              
 Package: ros-one-pr2-description
 Version: 1.13.1-2-g9a8e4fb-2025.12.06.05.52
 Architecture: amd64
 Maintainer: ROS Orphaned Package Maintainers <ros-orphaned-packages@googlegroups.com>
 Installed-Size: 44845
 Depends: ros-one-xacro
 Section: misc
 Priority: optional
 Homepage: http://ros.org/wiki/pr2_description
 Description: This package contains the description (mechanical, kinematic, visual, etc.) of the PR2 robot.
  The files in this package are parsed and used by a variety of other components. Most users will not interact directly with this package.

drwxr-xr-x root/root         0 2022-09-07 00:00 ./
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/lib/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/lib/pkgconfig/
-rw-r--r-- root/root       135 2022-09-07 00:00 ./opt/ros/one/lib/pkgconfig/pr2_description.pc
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/cmake/
-rw-r--r-- root/root       427 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/cmake/pr2_descriptionConfig-version.cmake
-rw-r--r-- root/root      9187 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/cmake/pr2_descriptionConfig.cmake
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/documents/
-rw-r--r-- root/root   3803136 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/documents/090224_link_data_with_motor_info.xls
-rw-r--r-- root/root    441344 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/documents/100416_floating_link.ppt
-rw-r--r-- root/root   4205757 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/documents/head_pan_and_tilt_mass_props.zip
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/gazebo/
-rw-r--r-- root/root       820 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/gazebo/gazebo.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/materials/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/materials/textures/
-rw-r--r-- root/root      2398 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/materials/textures/pr2_caster_texture.png
-rw-r--r-- root/root     16515 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/materials/textures/pr2_wheel_left.png
-rw-r--r-- root/root     15154 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/materials/textures/pr2_wheel_right.png
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/
-rw-r--r-- root/root        10 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/.gitignore
-rw-r--r-- root/root     94674 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/base.dae
-rw-r--r-- root/root     58284 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/base.stl
-rw-r--r-- root/root      4884 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/base_L.stl
-rw-r--r-- root/root    119115 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/base_color.png
-rw-r--r-- root/root    497755 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/base_normals.png
-rw-r--r-- root/root     50084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/caster.stl
-rw-r--r-- root/root      9484 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/caster_L.stl
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/
-rw-r--r-- root/root     34435 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base.dae
-rw-r--r-- root/root    162010 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base.obj
-rw-r--r-- root/root     17368 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base.xml
-rw-r--r-- root/root     20083 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L.dae
-rw-r--r-- root/root     12914 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L.obj
-rw-r--r-- root/root     10697 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L.xml
-rw-r--r-- root/root     27003 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L_convex.iv
-rw-r--r-- root/root      6095 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L_convex.obj
-rw-r--r-- root/root     23735 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L_convex.stla
-rw-r--r-- root/root      5884 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_L_convex.stlb
-rw-r--r-- root/root     56884 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_convex.iv
-rw-r--r-- root/root     12297 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_convex.obj
-rw-r--r-- root/root     50799 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_convex.stla
-rw-r--r-- root/root     12534 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/base_convex.stlb
-rw-r--r-- root/root     25046 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster.dae
-rw-r--r-- root/root    139703 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster.obj
-rw-r--r-- root/root     13050 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster.xml
-rw-r--r-- root/root     24925 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L.dae
-rw-r--r-- root/root     25239 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L.obj
-rw-r--r-- root/root     12834 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L.xml
-rw-r--r-- root/root     34182 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L_convex.iv
-rw-r--r-- root/root      7700 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L_convex.obj
-rw-r--r-- root/root     30349 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L_convex.stla
-rw-r--r-- root/root      7484 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_L_convex.stlb
-rw-r--r-- root/root     37604 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_convex.iv
-rw-r--r-- root/root      8215 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_convex.obj
-rw-r--r-- root/root     33670 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_convex.stla
-rw-r--r-- root/root      8284 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/caster_convex.stlb
-rw-r--r-- root/root     13506 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel.dae
-rw-r--r-- root/root    193509 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel.obj
-rw-r--r-- root/root      7883 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel.xml
-rw-r--r-- root/root     18856 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel_convex.iv
-rw-r--r-- root/root      4123 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel_convex.obj
-rw-r--r-- root/root     16529 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel_convex.stla
-rw-r--r-- root/root      4084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/pr2_wheel_convex.stlb
-rw-r--r-- root/root      6554 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel.dae
-rw-r--r-- root/root    140198 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel.obj
-rw-r--r-- root/root      4933 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel.xml
-rw-r--r-- root/root      5585 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel_convex.iv
-rw-r--r-- root/root      1354 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel_convex.obj
-rw-r--r-- root/root      4249 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/convex/wheel_convex.stlb
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/iv/
-rw-r--r-- root/root    258995 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/iv/base.iv
-rw-r--r-- root/root     21779 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/iv/base_L.iv
-rw-r--r-- root/root    222313 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/iv/caster.iv
-rw-r--r-- root/root     41512 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/iv/caster_L.iv
-rw-r--r-- root/root    307262 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/iv/pr2_wheel.iv
-rw-r--r-- root/root    222374 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/iv/wheel.iv
-rw-r--r-- root/root     69084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/pr2_wheel.stl
-rw-r--r-- root/root     78311 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/wheel.dae
-rw-r--r-- root/root     50084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/wheel.stl
-rw-r--r-- root/root     62768 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/wheel_color.png
-rw-r--r-- root/root   1594136 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/wheel_h.dae
-rw-r--r-- root/root     37234 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/wheel_h_color.png
-rw-r--r-- root/root    574788 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/base_v0/wheel_normals.png
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/
-rw-r--r-- root/root        10 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/.gitignore
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/
-rw-r--r-- root/root     31068 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm.dae
-rw-r--r-- root/root     46426 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm.obj
-rw-r--r-- root/root     16106 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm.xml
-rw-r--r-- root/root     50184 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm_convex.iv
-rw-r--r-- root/root     10696 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm_convex.obj
-rw-r--r-- root/root     45008 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm_convex.stla
-rw-r--r-- root/root     11084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/forearm_convex.stlb
-rw-r--r-- root/root      6680 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex.dae
-rw-r--r-- root/root     13399 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex.obj
-rw-r--r-- root/root      4987 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex.xml
-rw-r--r-- root/root      5610 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex_convex.iv
-rw-r--r-- root/root      1363 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex_convex.obj
-rw-r--r-- root/root      4263 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_flex_convex.stlb
-rw-r--r-- root/root      6635 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll.dae
-rw-r--r-- root/root    139420 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll.obj
-rw-r--r-- root/root      4942 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll.xml
-rw-r--r-- root/root      6642 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L.dae
-rw-r--r-- root/root     20319 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L.obj
-rw-r--r-- root/root      4931 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L.xml
-rw-r--r-- root/root      5601 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L_convex.iv
-rw-r--r-- root/root      1357 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L_convex.obj
-rw-r--r-- root/root      4225 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_L_convex.stlb
-rw-r--r-- root/root      5594 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_convex.iv
-rw-r--r-- root/root      1354 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_convex.obj
-rw-r--r-- root/root      4212 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/convex/wrist_roll_convex.stlb
-rw-r--r-- root/root    130163 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm.dae
-rw-r--r-- root/root    133897 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm.jpg
-rw-r--r-- root/root     17084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm.stl
-rw-r--r-- root/root    137001 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm_color.png
-rw-r--r-- root/root    432849 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/forearm_normals.png
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/
-rw-r--r-- root/root     74901 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/forearm.iv
-rw-r--r-- root/root     22384 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/wrist_flex.iv
-rw-r--r-- root/root    221582 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/wrist_roll.iv
-rw-r--r-- root/root     33361 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/iv/wrist_roll_L.iv
-rw-r--r-- root/root     24950 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_color.png
-rw-r--r-- root/root     75498 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_flex.dae
-rw-r--r-- root/root      4934 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_flex.stl
-rw-r--r-- root/root    225730 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_normals.png
-rw-r--r-- root/root     49984 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_roll.stl
-rw-r--r-- root/root      7584 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/forearm_v0/wrist_roll_L.stl
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/
-rw-r--r-- root/root        10 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/.gitignore
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/
-rw-r--r-- root/root      9156 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l.dae
-rw-r--r-- root/root    121296 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l.obj
-rw-r--r-- root/root      6081 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l.xml
-rw-r--r-- root/root     10004 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l_convex.iv
-rw-r--r-- root/root      2290 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l_convex.obj
-rw-r--r-- root/root      8383 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l_convex.stla
-rw-r--r-- root/root      2084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_l_convex.stlb
-rw-r--r-- root/root      6735 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l.dae
-rw-r--r-- root/root     18888 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l.obj
-rw-r--r-- root/root      4979 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l.xml
-rw-r--r-- root/root      5614 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.iv
-rw-r--r-- root/root      1368 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.obj
-rw-r--r-- root/root      4289 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_l_convex.stlb
-rw-r--r-- root/root      6711 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r.dae
-rw-r--r-- root/root     18709 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r.obj
-rw-r--r-- root/root      4955 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r.xml
-rw-r--r-- root/root      5604 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.iv
-rw-r--r-- root/root      1359 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.obj
-rw-r--r-- root/root      4231 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_pad2_r_convex.stlb
-rw-r--r-- root/root      9079 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r.dae
-rw-r--r-- root/root    120951 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r.obj
-rw-r--r-- root/root      6004 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r.xml
-rw-r--r-- root/root     10005 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r_convex.iv
-rw-r--r-- root/root      2289 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r_convex.obj
-rw-r--r-- root/root      8377 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r_convex.stla
-rw-r--r-- root/root      2084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/finger_tip_r_convex.stlb
-rw-r--r-- root/root      6721 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm.dae
-rw-r--r-- root/root     23053 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm.obj
-rw-r--r-- root/root      5010 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm.xml
-rw-r--r-- root/root      5597 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm_convex.iv
-rw-r--r-- root/root      1356 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm_convex.obj
-rw-r--r-- root/root      4219 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/gripper_palm_convex.stlb
-rw-r--r-- root/root      6633 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger.dae
-rw-r--r-- root/root     29149 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger.obj
-rw-r--r-- root/root      4958 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger.xml
-rw-r--r-- root/root      5590 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_convex.iv
-rw-r--r-- root/root      1354 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_convex.obj
-rw-r--r-- root/root      4217 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_convex.stlb
-rw-r--r-- root/root      6680 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip.dae
-rw-r--r-- root/root     20241 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip.obj
-rw-r--r-- root/root      4969 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip.xml
-rw-r--r-- root/root      5602 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip_convex.iv
-rw-r--r-- root/root      1361 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip_convex.obj
-rw-r--r-- root/root      4264 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_finger_tip_convex.stlb
-rw-r--r-- root/root      6626 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating.dae
-rw-r--r-- root/root    136063 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating.obj
-rw-r--r-- root/root      4933 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating.xml
-rw-r--r-- root/root      5595 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating_convex.iv
-rw-r--r-- root/root      1356 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating_convex.obj
-rw-r--r-- root/root      4229 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/l_floating_convex.stlb
-rw-r--r-- root/root      6699 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l.dae
-rw-r--r-- root/root     29737 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l.obj
-rw-r--r-- root/root      4970 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l.xml
-rw-r--r-- root/root      5600 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l_convex.iv
-rw-r--r-- root/root      1358 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l_convex.obj
-rw-r--r-- root/root      4221 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_l_convex.stlb
-rw-r--r-- root/root      6728 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r.dae
-rw-r--r-- root/root     30046 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r.obj
-rw-r--r-- root/root      4999 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r.xml
-rw-r--r-- root/root      5610 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r_convex.iv
-rw-r--r-- root/root      1365 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r_convex.obj
-rw-r--r-- root/root      4260 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/convex/upper_finger_r_convex.stlb
-rw-r--r-- root/root     23445 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_H_Color_100430.png
-rw-r--r-- root/root   2338678 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_H_UV_100430.dae
-rw-r--r-- root/root   1938133 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_H_UV_100430.dae
-rw-r--r-- root/root     44484 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_l.stl
-rw-r--r-- root/root      6984 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_pad2_l.stl
-rw-r--r-- root/root      6984 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_pad2_r.stl
-rw-r--r-- root/root     44484 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/finger_tip_r.stl
-rw-r--r-- root/root     18919 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/fingertip_H_Color_100430.png
-rw-r--r-- root/root     22152 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/float_H_Color_100430.png
-rw-r--r-- root/root   1623179 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/float_H_UV_100430.dae
-rw-r--r-- root/root     78406 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm.dae
-rw-r--r-- root/root      8584 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm.stl
-rw-r--r-- root/root     30409 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm_color.png
-rw-r--r-- root/root    325307 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/gripper_palm_normals.png
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/
-rw-r--r-- root/root    193377 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/finger_tip_l.iv
-rw-r--r-- root/root     31024 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/finger_tip_pad2_l.iv
-rw-r--r-- root/root     30948 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/finger_tip_pad2_r.iv
-rw-r--r-- root/root    193031 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/finger_tip_r.iv
-rw-r--r-- root/root     37647 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/gripper_palm.iv
-rw-r--r-- root/root     47692 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/l_finger.iv
-rw-r--r-- root/root     33231 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/l_finger_tip.iv
-rw-r--r-- root/root    216423 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/l_floating.iv
-rw-r--r-- root/root     48620 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/upper_finger_l.iv
-rw-r--r-- root/root     48672 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/iv/upper_finger_r.iv
-rw-r--r-- root/root    145735 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger.dae
-rw-r--r-- root/root     10734 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger.stl
-rw-r--r-- root/root     29539 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_color.png
-rw-r--r-- root/root    270147 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_normals.png
-rw-r--r-- root/root     78078 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip.dae
-rw-r--r-- root/root      7534 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip.stl
-rw-r--r-- root/root     27722 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip_color.png
-rw-r--r-- root/root    308393 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_finger_tip_normals.png
-rw-r--r-- root/root     77694 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_float.dae
-rw-r--r-- root/root     63181 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_float_color.png
-rw-r--r-- root/root    383728 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_float_normals.png
-rw-r--r-- root/root     48584 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/l_floating.stl
-rw-r--r-- root/root     29283 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/palm_H_Color_100430.png
-rw-r--r-- root/root    969820 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/palm_H_UV_100430.dae
-rw-r--r-- root/root     11084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/upper_finger_l.stl
-rw-r--r-- root/root     11084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/gripper_v0/upper_finger_r.stl
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/
-rw-r--r-- root/root        10 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/.gitignore
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/
-rw-r--r-- root/root     25507 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan.dae
-rw-r--r-- root/root    140019 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan.obj
-rw-r--r-- root/root     13360 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan.xml
-rw-r--r-- root/root     16380 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L.dae
-rw-r--r-- root/root     29976 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L.obj
-rw-r--r-- root/root      9398 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L.xml
-rw-r--r-- root/root     23281 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L_convex.iv
-rw-r--r-- root/root      5038 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L_convex.obj
-rw-r--r-- root/root     20587 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L_convex.stla
-rw-r--r-- root/root      5084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_L_convex.stlb
-rw-r--r-- root/root     38875 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_convex.iv
-rw-r--r-- root/root      8399 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_convex.obj
-rw-r--r-- root/root     34827 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_convex.stla
-rw-r--r-- root/root      8584 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_pan_convex.stlb
-rw-r--r-- root/root     21176 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt.dae
-rw-r--r-- root/root    147333 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt.obj
-rw-r--r-- root/root     11587 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt.xml
-rw-r--r-- root/root     18318 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L.dae
-rw-r--r-- root/root     14373 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L.obj
-rw-r--r-- root/root     10005 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L.xml
-rw-r--r-- root/root     23855 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L_convex.iv
-rw-r--r-- root/root      5369 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L_convex.obj
-rw-r--r-- root/root     20902 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L_convex.stla
-rw-r--r-- root/root      5184 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_L_convex.stlb
-rw-r--r-- root/root     31836 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_convex.iv
-rw-r--r-- root/root      6901 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_convex.obj
-rw-r--r-- root/root     28443 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_convex.stla
-rw-r--r-- root/root      6984 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/convex/head_tilt_convex.stlb
-rw-r--r-- root/root     80860 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_pan.dae
-rw-r--r-- root/root     50084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_pan.stl
-rw-r--r-- root/root     11084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_pan_L.stl
-rw-r--r-- root/root     30996 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_pan_color.png
-rw-r--r-- root/root    470244 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_pan_normals.png
-rw-r--r-- root/root     85089 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt.dae
-rw-r--r-- root/root     52684 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt.stl
-rw-r--r-- root/root      5384 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_L.stl
-rw-r--r-- root/root    147862 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color.png
-rw-r--r-- root/root    142019 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color_red.png
-rw-r--r-- root/root    142140 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_color_yellow.png
-rw-r--r-- root/root    141769 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_green.png
-rw-r--r-- root/root    386754 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/head_tilt_normals.png
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/iv/
-rw-r--r-- root/root    222713 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/iv/head_pan.iv
-rw-r--r-- root/root     48544 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/iv/head_pan_L.iv
-rw-r--r-- root/root    235361 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/iv/head_tilt.iv
-rw-r--r-- root/root     24000 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/head_v0/iv/head_tilt_L.iv
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect2_v0/
-rw-r--r-- root/root    939484 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect2_v0/kinect2_assembly.STL
-rw-r--r-- root/root   1152262 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect2_v0/kinect2_assembly.dae
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/
-rw-r--r-- root/root    916084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/115x100_swept_back--coarse.STL
-rw-r--r-- root/root    639884 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/115x100_swept_back_no_sensors--coarse.STL
-rw-r--r-- root/root    916084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/115x100_swept_fwd--coarse.STL
-rw-r--r-- root/root    603884 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/115x100_swept_fwd_no_sensors--coarse.STL
-rw-r--r-- root/root     81484 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/68-04546_Kinect_Sensor--coarse.STL
-rw-r--r-- root/root   1318334 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_prosilica_v0/Prosilica_w_Lens--coarse.STL
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/
-rw-r--r-- root/root    164201 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/kinect.dae
-rw-r--r-- root/root     47572 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/kinect.tga
-rw-r--r-- root/root     47572 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/kinect_color.tga
-rw-r--r-- root/root    150084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/sensors/kinect_v0/kinect_mount.stl
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/
-rw-r--r-- root/root        10 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/.gitignore
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/
-rw-r--r-- root/root     31661 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift.dae
-rw-r--r-- root/root     32971 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift.obj
-rw-r--r-- root/root     16153 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift.xml
-rw-r--r-- root/root     48946 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift_convex.iv
-rw-r--r-- root/root     10569 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift_convex.obj
-rw-r--r-- root/root     44186 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift_convex.stla
-rw-r--r-- root/root     10784 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_lift_convex.stlb
-rw-r--r-- root/root     16757 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan.dae
-rw-r--r-- root/root     34039 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan.obj
-rw-r--r-- root/root      9553 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan.xml
-rw-r--r-- root/root     23299 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan_convex.iv
-rw-r--r-- root/root      5043 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan_convex.obj
-rw-r--r-- root/root     20596 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan_convex.stla
-rw-r--r-- root/root      5084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_pan_convex.stlb
-rw-r--r-- root/root     16761 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw.dae
-rw-r--r-- root/root    140314 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw.obj
-rw-r--r-- root/root      9557 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw.xml
-rw-r--r-- root/root     23303 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw_convex.iv
-rw-r--r-- root/root      5048 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw_convex.obj
-rw-r--r-- root/root     20619 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw_convex.stla
-rw-r--r-- root/root      5084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/shoulder_yaw_convex.stlb
-rw-r--r-- root/root     11765 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll.dae
-rw-r--r-- root/root    139393 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll.obj
-rw-r--r-- root/root      7257 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll.xml
-rw-r--r-- root/root     19244 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L.dae
-rw-r--r-- root/root     13619 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L.obj
-rw-r--r-- root/root     10500 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L.xml
-rw-r--r-- root/root     26872 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.iv
-rw-r--r-- root/root      5829 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.obj
-rw-r--r-- root/root     23789 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.stla
-rw-r--r-- root/root      5884 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_L_convex.stlb
-rw-r--r-- root/root     14421 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_convex.iv
-rw-r--r-- root/root      3193 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_convex.obj
-rw-r--r-- root/root     12371 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_convex.stla
-rw-r--r-- root/root      3084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/convex/upper_arm_roll_convex.stlb
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/
-rw-r--r-- root/root     53636 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/shoulder_lift.iv
-rw-r--r-- root/root     55135 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/shoulder_pan.iv
-rw-r--r-- root/root    222615 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/shoulder_yaw.iv
-rw-r--r-- root/root    221546 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/upper_arm_roll.iv
-rw-r--r-- root/root     22989 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/iv/upper_arm_roll_L.iv
-rw-r--r-- root/root     78266 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift.dae
-rw-r--r-- root/root     12084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift.stl
-rw-r--r-- root/root     25567 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift_color.png
-rw-r--r-- root/root    343805 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_lift_normals.png
-rw-r--r-- root/root     74998 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan.dae
-rw-r--r-- root/root     12584 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan.stl
-rw-r--r-- root/root     74567 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan_color.png
-rw-r--r-- root/root    351260 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_pan_normals.png
-rw-r--r-- root/root     50084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/shoulder_yaw.stl
-rw-r--r-- root/root     79717 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll.dae
-rw-r--r-- root/root     49884 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll.stl
-rw-r--r-- root/root      5084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll_L.stl
-rw-r--r-- root/root     25025 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll_color.png
-rw-r--r-- root/root    358547 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/shoulder_v0/upper_arm_roll_normals.png
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/
-rw-r--r-- root/root        10 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/.gitignore
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/
-rw-r--r-- root/root     16395 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt.dae
-rw-r--r-- root/root     70761 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt.obj
-rw-r--r-- root/root      9154 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt.xml
-rw-r--r-- root/root     23295 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt_convex.iv
-rw-r--r-- root/root      5038 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt_convex.obj
-rw-r--r-- root/root     20545 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt_convex.stla
-rw-r--r-- root/root      5084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/hok_tilt_convex.stlb
-rw-r--r-- root/root      6841 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo.dae
-rw-r--r-- root/root    139516 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo.obj
-rw-r--r-- root/root      5058 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo.xml
-rw-r--r-- root/root     19196 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.dae
-rw-r--r-- root/root     12195 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.obj
-rw-r--r-- root/root     10248 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L.xml
-rw-r--r-- root/root     24343 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.iv
-rw-r--r-- root/root      5469 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.obj
-rw-r--r-- root/root     21423 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.stla
-rw-r--r-- root/root      5284 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_L_convex.stlb
-rw-r--r-- root/root      5617 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.iv
-rw-r--r-- root/root      1367 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.obj
-rw-r--r-- root/root      4245 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.stla
-rw-r--r-- root/root      1084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/convex/tilting_hokuyo_convex.stlb
-rw-r--r-- root/root     25884 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/hok_tilt.stl
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/iv/
-rw-r--r-- root/root    114357 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/iv/hok_tilt.iv
-rw-r--r-- root/root    222190 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/iv/tilting_hokuyo.iv
-rw-r--r-- root/root     20684 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/iv/tilting_hokuyo_L.iv
-rw-r--r-- root/root     76426 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo.dae
-rw-r--r-- root/root     49984 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo.stl
-rw-r--r-- root/root      4584 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo_L.stl
-rw-r--r-- root/root     49556 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo_color.png
-rw-r--r-- root/root    411091 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/tilting_laser_v0/tilting_hokuyo_normals.png
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/
-rw-r--r-- root/root        10 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/.gitignore
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/
-rw-r--r-- root/root     16176 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso.dae
-rw-r--r-- root/root    191861 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso.obj
-rw-r--r-- root/root      9342 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso.xml
-rw-r--r-- root/root     23322 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_convex.iv
-rw-r--r-- root/root      5076 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_convex.obj
-rw-r--r-- root/root     20772 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_convex.stla
-rw-r--r-- root/root      5084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_convex.stlb
-rw-r--r-- root/root     21177 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift.dae
-rw-r--r-- root/root    112228 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift.obj
-rw-r--r-- root/root     11507 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift.xml
-rw-r--r-- root/root     16266 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L.dae
-rw-r--r-- root/root     20267 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L.obj
-rw-r--r-- root/root      9187 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L.xml
-rw-r--r-- root/root     21627 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L_convex.iv
-rw-r--r-- root/root      4823 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L_convex.obj
-rw-r--r-- root/root     19120 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L_convex.stla
-rw-r--r-- root/root      4684 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_L_convex.stlb
-rw-r--r-- root/root     30164 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_convex.iv
-rw-r--r-- root/root      6697 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_convex.obj
-rw-r--r-- root/root     27054 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_convex.stla
-rw-r--r-- root/root      6584 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/convex/torso_lift_convex.stlb
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/iv/
-rw-r--r-- root/root    324939 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/iv/torso.iv
-rw-r--r-- root/root    180614 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/iv/torso_lift.iv
-rw-r--r-- root/root     33523 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/iv/torso_lift_L.iv
-rw-r--r-- root/root    104684 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/torso.stl
-rw-r--r-- root/root     77731 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift.dae
-rw-r--r-- root/root     39834 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift.stl
-rw-r--r-- root/root      7584 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift_L.stl
-rw-r--r-- root/root    108994 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift_color.png
-rw-r--r-- root/root    423410 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/torso_v0/torso_lift_normals.png
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/
-rw-r--r-- root/root        10 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/.gitignore
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/
-rw-r--r-- root/root     26501 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex.dae
-rw-r--r-- root/root     20094 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex.obj
-rw-r--r-- root/root     13878 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex.xml
-rw-r--r-- root/root     41147 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex_convex.iv
-rw-r--r-- root/root      8795 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex_convex.obj
-rw-r--r-- root/root     37123 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex_convex.stla
-rw-r--r-- root/root      9084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/elbow_flex_convex.stlb
-rw-r--r-- root/root     16605 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll.dae
-rw-r--r-- root/root    138446 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll.obj
-rw-r--r-- root/root      9364 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll.xml
-rw-r--r-- root/root     16701 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L.dae
-rw-r--r-- root/root     26988 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L.obj
-rw-r--r-- root/root      9386 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L.xml
-rw-r--r-- root/root     23296 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L_convex.iv
-rw-r--r-- root/root      5043 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L_convex.obj
-rw-r--r-- root/root     20580 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L_convex.stla
-rw-r--r-- root/root      5084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_L_convex.stlb
-rw-r--r-- root/root     23302 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_convex.iv
-rw-r--r-- root/root      5042 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_convex.obj
-rw-r--r-- root/root     20590 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_convex.stla
-rw-r--r-- root/root      5084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/forearm_roll_convex.stlb
-rw-r--r-- root/root     31448 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm.dae
-rw-r--r-- root/root     43662 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm.obj
-rw-r--r-- root/root     16170 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm.xml
-rw-r--r-- root/root     50233 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm_convex.iv
-rw-r--r-- root/root     10747 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm_convex.obj
-rw-r--r-- root/root     45186 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm_convex.stla
-rw-r--r-- root/root     11084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/convex/upper_arm_convex.stlb
-rw-r--r-- root/root     78712 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex.dae
-rw-r--r-- root/root      7484 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex.stl
-rw-r--r-- root/root     25663 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex_color.png
-rw-r--r-- root/root    311473 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/elbow_flex_normals.png
-rw-r--r-- root/root     49734 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/forearm_roll.stl
-rw-r--r-- root/root     10084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/forearm_roll_L.stl
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/
-rw-r--r-- root/root     32822 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/elbow_flex.iv
-rw-r--r-- root/root    220972 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/forearm_roll.iv
-rw-r--r-- root/root     44082 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/forearm_roll_L.iv
-rw-r--r-- root/root     70473 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/iv/upper_arm.iv
-rw-r--r-- root/root    123139 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm.dae
-rw-r--r-- root/root    160419 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm.jpg
-rw-r--r-- root/root     16084 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm.stl
-rw-r--r-- root/root     55682 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm_color.png
-rw-r--r-- root/root    452555 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/meshes/upper_arm_v0/upper_arm_normals.png
-rw-r--r-- root/root      1098 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/package.xml
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/robots/
-rw-r--r-- root/root       178 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/robots/README
-rw-r--r-- root/root      8724 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/robots/pr2.urdf.xacro
-rw-r--r-- root/root      3502 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/robots/pr2_no_arms.urdf.xacro
-rw-r--r-- root/root      6967 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/robots/pr2_no_kinect.urdf.xacro
-rw-r--r-- root/root      7769 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/robots/pr2_se.urdf.xacro
-rw-r--r-- root/root       374 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/robots/upload_pr2.launch
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/base_v0/
-rw-r--r-- root/root      1857 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/base_v0/base.gazebo.xacro
-rw-r--r-- root/root       940 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/base_v0/base.transmission.xacro
-rw-r--r-- root/root      9506 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/base_v0/base.urdf.xacro
-rw-r--r-- root/root      3369 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/common.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/forearm_v0/
-rw-r--r-- root/root       848 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/forearm_v0/forearm.gazebo.xacro
-rw-r--r-- root/root       657 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/forearm_v0/forearm.transmission.xacro
-rw-r--r-- root/root      5054 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/forearm_v0/forearm.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/gripper_v0/
-rw-r--r-- root/root     10530 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/gripper_v0/gripper.gazebo.xacro
-rw-r--r-- root/root      2672 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/gripper_v0/gripper.transmission.xacro
-rw-r--r-- root/root     12943 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/gripper_v0/gripper.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/head_v0/
-rw-r--r-- root/root       259 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/head_v0/head.gazebo.xacro
-rw-r--r-- root/root       736 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/head_v0/head.transmission.xacro
-rw-r--r-- root/root      4779 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/head_v0/head.urdf.xacro
-rw-r--r-- root/root      1214 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/materials.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/
-rw-r--r-- root/root       467 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/double_stereo_camera.gazebo.xacro
-rw-r--r-- root/root      2126 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/double_stereo_camera.urdf.xacro
-rw-r--r-- root/root       518 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/head_sensor_package.gazebo.xacro
-rw-r--r-- root/root      1948 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/head_sensor_package.urdf.xacro
-rw-r--r-- root/root      1289 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/hokuyo_lx30_laser.gazebo.xacro
-rw-r--r-- root/root       961 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/hokuyo_lx30_laser.urdf.xacro
-rw-r--r-- root/root      3615 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/kinect2.gazebo.xacro
-rw-r--r-- root/root      3810 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/kinect2.urdf.xacro
-rw-r--r-- root/root      3256 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/kinect_camera.gazebo.xacro
-rw-r--r-- root/root      1655 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/kinect_camera.urdf.xacro
-rw-r--r-- root/root      7409 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/kinect_prosilica_camera.gazebo.xacro
-rw-r--r-- root/root      6319 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/kinect_prosilica_camera.urdf.xacro
-rw-r--r-- root/root       663 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/microstrain_3dmgx2_imu.gazebo.xacro
-rw-r--r-- root/root       917 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/microstrain_3dmgx2_imu.urdf.xacro
-rw-r--r-- root/root      1289 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/projector_wg6802418.gazebo.xacro
-rw-r--r-- root/root      1292 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/projector_wg6802418.urdf.xacro
-rw-r--r-- root/root      1456 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/prosilica_gc2450_camera.gazebo.xacro
-rw-r--r-- root/root      1549 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/prosilica_gc2450_camera.urdf.xacro
-rw-r--r-- root/root       573 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/stereo_camera.gazebo.xacro
-rw-r--r-- root/root      3433 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/stereo_camera.urdf.xacro
-rw-r--r-- root/root      1915 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/wge100_camera.gazebo.xacro
-rw-r--r-- root/root      1943 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/sensors/wge100_camera.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/shoulder_v0/
-rw-r--r-- root/root      1170 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/shoulder_v0/shoulder.gazebo.xacro
-rw-r--r-- root/root      1632 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/shoulder_v0/shoulder.transmission.xacro
-rw-r--r-- root/root      7346 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/shoulder_v0/shoulder.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/tilting_laser_v0/
-rw-r--r-- root/root       224 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/tilting_laser_v0/tilting_laser.gazebo.xacro
-rw-r--r-- root/root       428 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/tilting_laser_v0/tilting_laser.transmission.xacro
-rw-r--r-- root/root      2265 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/tilting_laser_v0/tilting_laser.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/torso_v0/
-rw-r--r-- root/root      1024 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/torso_v0/torso.gazebo.xacro
-rw-r--r-- root/root       541 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/torso_v0/torso.transmission.xacro
-rw-r--r-- root/root      4507 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/torso_v0/torso.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/upper_arm_v0/
-rw-r--r-- root/root      1178 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/upper_arm_v0/upper_arm.gazebo.xacro
-rw-r--r-- root/root       974 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/upper_arm_v0/upper_arm.transmission.xacro
-rw-r--r-- root/root      7869 2022-09-07 00:00 ./opt/ros/one/share/pr2_description/urdf/upper_arm_v0/upper_arm.urdf.xacro
drwxr-xr-x root/root         0 2022-09-07 00:00 ./usr/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./usr/share/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./usr/share/doc/
drwxr-xr-x root/root         0 2022-09-07 00:00 ./usr/share/doc/ros-one-pr2-description/
-rw-r--r-- root/root      2031 2022-09-07 00:00 ./usr/share/doc/ros-one-pr2-description/changelog.Debian.gz
-rw-r--r-- root/root      2450 2022-09-07 00:00 ./usr/share/doc/ros-one-pr2-description/changelog.gz
-rw-r--r-- root/root       343 2022-09-07 00:00 ./usr/share/doc/ros-one-pr2-description/copyright


+------------------------------------------------------------------------------+
| Post Build                                   Sat, 06 Dec 2025 05:54:52 +0000 |
+------------------------------------------------------------------------------+


+------------------------------------------------------------------------------+
| Cleanup                                      Sat, 06 Dec 2025 05:54:52 +0000 |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use

+------------------------------------------------------------------------------+
| Summary                                      Sat, 06 Dec 2025 05:54:54 +0000 |
+------------------------------------------------------------------------------+

Build Architecture: amd64
Build Profiles: nocheck
Build Type: binary
Build-Space: 110348
Build-Time: 18
Distribution: bookworm
Host Architecture: amd64
Install-Time: 13
Job: /home/runner/work/ros-o-builder/ros-o-builder/src/pr2_common/ros-one-pr2-description_1.13.1-2-g9a8e4fb-2025.12.06.05.52.dsc
Machine Architecture: amd64
Package: ros-one-pr2-description
Package-Time: 129
Source-Version: 1.13.1-2-g9a8e4fb-2025.12.06.05.52
Space: 110348
Status: successful
Version: 1.13.1-2-g9a8e4fb-2025.12.06.05.52
--------------------------------------------------------------------------------
Finished at 2025-12-06T05:54:50Z
Build needed 00:02:09, 110348k disk space