========== ========== ========== ==========
  FlashAir RTC SET Tool  v0.01
========== ========== ========== ==========

【 Software Name 】 FlashAir RTC SET Tool
【 Creator 】Yu-kun
【 Operating System 】MSX-DOS2
【 Version 】0.01
【 Last Updated 】2017/03/19
【 File Name 】FA_TIME.COM
【 Table 】http://miyako.asablo.jp/blog

---------- ----------

◇ Overview ◇
Use FlashAir's Wifi function to get the time from the NTP server (ntp-a1.nict.go.jp), Set the time of FlashAir RTC and MSX.
It is basically dedicated to 1chip MSX.

◇ Operating conditions ◇
SDHC available 1chipMSX (1chipNextorMSX, etc.) & at FlashAir W-03

◇ How to use ◇
Insert FlashAir into the SD card slot of 1chip MSX and run this program from MSX-DOS2.
Automatically obtains the time from the NTP server and sets the MSX time.
It is assumed that FlashAir can connect to the Internet, such as ST mode.

The following options are available:

/T[+-]xx Specifies the time zone. The default is /T-09 (Japan Standard Time).

/Sxx Specifies the slot to which the SD card is attached. The default is 8D (3-2) used in 1chipMSX. Please set it appropriately when using MegaFlashROM SCC+ SD.

/M Set only the RTC of FlashAir, not the MSX clock.

◇ Disclaimer ◇
Any damage or damage caused by using this software We are not responsible for any occurrences. Please use it at your own risk.

◇ FAQ / Known bugs ◇
We do not have MegaFlashROM SCC+ SD, so regarding slot designation Not verified.

----------

◇ Contact ◇
http://miyako.asablo.jp/blog

◇ History ◇
2017/03/19 Ver0.01 First release