################################# 
# Pi MusicBox / Mopidy Settings # 
################################# 
# 
# Edit the settings of your MusicBox and the Mopidy music server here
# This is a file read by both the MusicBox startup-scripts and Mopidy.
# For more info on the settings of Mopidy: http://docs.mopidy.com/en/latest/config/
# or the particular extenion's GitHub page 
#
# Every line starting with a # is a comment, it does not do anything until you remove the #

# --------------------
# | Network Settings |
# --------------------
[network]
# Settings for your WiFi network, if you use a (supported) wifi-dongle
# Only supports WPA security, no WEP or access points without security (dive into the command line for that!)
wifi_network = 
wifi_password = 
# Optionally set the wifi region for correct regulatory configuration (available channels etc.)
# Use the ISO / IEC 3166 alpha2 country code, e.g. wifi_country = GB
wifi_country = 

# Set the name of the MusicBox. 
# In this way you can identify and access different devices on the same network e.g. across different rooms.
# A MusicBox device named kitchen would be accessible from a web browser at http://kitchen.local/, from an MPD 
# client at kitchen.local and advertised as kitchen on AirTunes.
# The name is restricted to a maximum of 9 alphanumeric characters (no spaces, dots, etc).
# You can even have different devices with different Spotify accounts when needed.
name = MusicBox

# Mount Windows Network Drive on boot (via samba/cifs)
# The address is exactly how Samba mount works: //servername/mountpoint/directory
# e.g. //192.168.1.5/musicmount or //server.local/shared/music
# if the mount needs a username/password, also set it (leave empty for guest-access)
# Additional comma-separated mount options can also be specified.
# Don't forget to let Mopidy/MusicBox scan the contents at first boot (see below) 
mount_address = 
mount_user = 
mount_password = 
mount_options = vers=1.0

# Here you can change the default workgroup of the Windows network.
# This will set the workgroup to the name you want
workgroup = WORKGROUP

# Enable this to allow remote login via SSH on MusicBox
enable_ssh = false

# Enable this to block network connections on ports other than those explicitly
# required by Musicbox. This may prevent any additional network programs from working correctly.
# This should be enabled **alongside other security hardening methods** if
# using Musicbox outside of your LAN (not recommended).
enable_firewall = false

# By default, MusicBox waits for the network to come up, since there is not much to do without a network.
# If you want to skip this, e.g. for testing purposes, uncomment this line
wait_for_network = true

# -----------
# | Spotify |
# -----------
# https://github.com/mopidy/mopidy-spotify
[spotify]
# Supply your PREMIUM account credentials to enable Spotify
enabled = false
username = 
password = 
# ALSO supply your credentials obtained from https://mopidy.com/ext/spotify/#authentication
client_id = 
client_secret = 
# The bitrate, the quality of the music played by Spotify, can be set to 96, 160 (default) or 320
bitrate = 320
cache_dir = ""

# ---------------
# | Spotify-Web |
# ---------------
# https://github.com/lfcabend/mopidy-spotify-web
# Supply same client credentials as Spotify above
[spotify_web]
enabled = false
client_id = 
client_secret = 

# -----------
# | Last.fm |
# -----------
# https://github.com/mopidy/mopidy-scrobbler
# Supply your credentials to scrobble tracks to Last.fm
[scrobbler]
enabled = false
username = 
password = 

# --------------
# | SoundCloud |
# --------------
# https://github.com/mopidy/mopidy-soundcloud
# Supply your auth_token obtained from https://mopidy.com/ext/soundcloud/#authentication
[soundcloud]
enabled = false
auth_token = 

# ----------------
# | Google Music |
# ----------------
# https://github.com/hechtus/mopidy-gmusic
# Supply your credentials to enable Google Music
# NOTE: If enabled this may slow down the start of MusicBox. Please be patient
[gmusic]
enabled = false
username  = 
password = 
deviceid = 

# -----------
# | YouTube |
# -----------
# https://github.com/dz0ny/mopidy-youtube
# Play music from Youtube
# NOTE: Search is currently broken!
[youtube]
enabled = true

# ----------
# | Dirble |
# ----------
# https://github.com/mopidy/mopidy-dirble
# Play radio stations from Dirble
[dirble]
enabled = true
api_key = 473279e3fa0e7010cbbbb40ecc31890d46e57a2e
countries = US, NL, DE, NO, SE

# ----------------
# | TuneIn Radio |
# ----------------
# https://github.com/kingosticks/mopidy-tunein
# Play radio stations from TuneIn
[tunein]
enabled = true

# ------------------------
# | The Internet Archive |
# ------------------------
# http://mopidy-internetarchive.readthedocs.org/en/latest/config.html
# Listen to sounds and music from the Internet Archive
[internetarchive]
enabled = false

# -----------
# | Soma FM |
# -----------
# https://github.com/AlexandrePTJ/mopidy-somafm
# Play radio stations from Soma FM
[somafm]
enabled = false
encoding = mp3
quality = fast

# -----------
# | Podcast |
# -----------
# http://mopidy-podcast.readthedocs.io/en/v2.0.1/
# Browse podcasts distributed as RSS feeds and play individual episodes in a variety of audio formats
# Edit the subscription file at /boot/config/Podcasts.opml
[podcast]
enabled = true

# WARNING: Do not add settings for [podcast-itunes]
# because it breaks the startup script (won't read dashes in section names)

# ---------------
# | AudioAddict |
# ---------------
# https://github.com/nilicule/mopidy-audioaddict
# Play music from all the AudioAddict network of sites (login optional)
[audioaddict]
enabled = false

# ---------
# | Tidal |
# ---------
# https://github.com/mones88/mopidy-tidal
# Supply your credentials to enable Tidal.
[tidal]
enabled = false
username = 
password = 
# Can be set to LOW, HIGH or LOSSLESS. LOSSLESS requires a Tidal HiFi Subscription
quality = HIGH


# ---------------------
# | MusicBox Settings |
# ---------------------
[musicbox]
# To secure your device, change the default password to something else.
# For security, the value below will be automatically cleared once the password is changed.
root_password = musicbox

# Automatically resize the filesystem and use all available space on your SD card. 
# Use at your own risk, you could lose data on your card.  
# (If so, you can put the original MusicBox image on it again and start over) 
resize_once = true

# Scan on startup for new music files on the SD card or the network shares (could take a while!).
# Local files work ok for moderate size collections. Large music database sizes could cause problems.
# IMPORTANT: if you enable scan_always this will scan on every boot.
# If your music doesn't change or you only stream music set scan_once instead. 
#scan_once = true
scan_always = true

# MusicBox can automatically start playing a stream/song after startup.
# It will wait up to autoplaymaxwait seconds before trying to do so for the system to first become ready.
# The wait required varies per device, network and configuration so if it doesn't work then increase the time.
# e.g. autoplay = http://nprdmp.ic.llnwd.net/stream/nprdmp_live01_mp3 or local:track:MusicBox/Music%20File.mp3 (on the SD Card)
autoplay = 
autoplaymaxwait = 60

# -------------
# -------------
# | Webclient |
# -------------
# Here you can change the default webclient from musicbox_webclient to something else.
# Options: musicbox_webclient, moped, mobile, mopify, simple-webclient, kuechenradio
webclient = 

# Monitor playback to automatically restart internet streams following connectivity issues. 
enable_mpd_watchdog = 

# -------------
# | Streaming |
# -------------
# Set these options to enable streaming to Pi MusicBox
# AirTunes (using Shairport-sync):
enable_shairport = 

# DLNA/uPnP/OpenHome (using upmpdcli):
enable_upnp = 

# Spotify Connect support (using librespot) ** BETA**
enable_connect =

# ------------------
# | Audio Settings |
# ------------------
# Because of limitations with some USB-DACs, MusicBox downsamples USB sound to 44k by default. Set to false to disable.
downsample_usb = true

# Set default system audio output. This overrides the automatic detection (which sets to usb audio if a usb audio device
# is found, else to hdmi (if hdmi is connected at boot), and otherwise just to the analog out).
# i2s cards (e.g. HifiBerry etc) are not detected automatically and must be explicitly set here.
# Options: analog, hdmi, usb, hifiberry_dac, hifiberry_digi, hifiberry_dacplus, hifiberry_amp, justboom_dac, justboom_digi,
# iqaudio_dacplus, iqaudio_digi_wm8804_audio, audioinjector-wm8731-audio, audioinjector-addons,
# allo-boss-dac, allo-piano-dac, allo-piano-dac-plus, allo_digione
# If you don't know what to put here then use websettings instead.
output = 

# --------------------------------------------------------------------------
# | OTHER Settings                                                         |
# | You probably don't want to edit the settings below this line. Really.  |
# | Unless you know what you're doing.                                     |
# --------------------------------------------------------------------------
[audio]
# This is Mopidy's audio volume. Other applications do not use this.
mixer_volume = 85

# This sets the gstreamer buffer. It's a bit tricky...
# If you have problems with stuttering sound, try other values here, like:
#output = alsasink buffer-time=300000 latency-time=20000
#output = alsasink buffer-time=200000 latency-time=10000
output = alsasink

mixer = software

# Optionally, you can use alsamixer to enable your usb/audiocard hardware mixer (if available).
# To use this, set the previous setting to 'mixer = alsamixer', then enable alsamixer below and 
# set the appropriate card and contol values. 
# Run the command 'amixer scontrols' from the commandline to list the available controls for your mixer.
# See https://github.com/mopidy/mopidy-alsamixer for more details.
[alsamixer]
enabled = false
card = 1
control = Master

[stream]
enabled = true

[http]
hostname = 0.0.0.0
#Disable zeroconf
zeroconf = ""
static_dir = /opt/musicbox/webclient

[musicbox_webclient]
musicbox = true

[websettings]
musicbox = true
config_file = /boot/config/settings.ini

[mpd]
hostname = 0.0.0.0
#Disable zeroconf
zeroconf = ""

[core]
cache_dir = /var/cache/mopidy
config_dir = /etc/mopidy
data_dir = /var/lib/mopidy

[logging]
config_file = /etc/mopidy/logging.conf
debug_file = /var/log/mopidy/mopidy-debug.log

[local]
enabled = true
library = sqlite
media_dir = /music
scan_follow_symlinks = true
excluded_file_extensions = .directory .html, .jpeg, .jpg, .log, .nfo, .png, .txt, .mkv, .avi, .divx, .qt, .htm, .zip, .rar, .gz, .pdf, .exe, .ini, .mid, .db, .m3u, .sfv, .midi

# WARNING: Do not add settings for [local-sqlite]
# because it breaks the startup script (won't read dashes in section names)

[file]
media_dirs = /music|Music
follow_symlinks = true

[m3u]
playlists_dir = /music/playlists