# baseline vs clock-gating optimizations (ALL REAL DATA) # Synthesis: Design Compiler, worst corners saed32 rvt+lvt+hvt ss0p75v125c. # Power: PrimeTime PX, gate-level VCD, same representative workload across configs. Config Freq(MHz) Area(um2) Power(mW) Dyn(uW) vs base --------------------------------------------------------------------------------------- Baseline (ungated) 357.1 19474.0 1.4840 49.64 +0.0% Opt1 RTL gating 333.3 18043.2 1.1550 39.30 -22.2% Opt2 synth gating 294.1 17745.1 1.0500 12.58 -29.2% Opt3 both 333.3 18468.6 1.1410 31.22 -23.1% Takeaways (real numbers): - All three clock-gating variants cut total power vs baseline (-22% to -29%). - Dynamic (internal+switching) power, the gating target, drops most: 49.6uW (base) -> 12.6uW (Opt2), because gated clocks stop toggling idle registers. - Clock gating also REDUCES area (shared ICG cells replace per-register feedback muxes), which lowers leakage at this corner; cost is a small Fmax reduction.