5.02021-11-21T22:05:14ZTemplatesTemplates/Network devicesMobotix CameraMobotix Camera## Overview
This template will get you the following items from a Mobotix IP Security Camera:
Model Name, Name, Serial Number, Uptime, Storage Type, Storage Used Space, Flash Wear, Remaining Time to save, Software Version, Software Version Timestamp
It will trigger on the following:
* Used space above 80% (High)
* Flash Wear above 65% (Warning)
* Flash Wear above 80% (High)
* Storage Low Time Remaining (High)
* Storage Failed (High)
TemplatesTemplates/Network devicesDeviceSoftwareStorage- Camera ModelSNMP_AGENT1.3.6.1.4.1.21701.2.1.1.0camera.model6h0CHAROID name in MIB: cameraModel
Description: Model of the MOBOTIX cameraDevice
- Camera NameSNMP_AGENT1.3.6.1.4.1.21701.2.1.3.0camera.name6h0CHAROID name in MIB: cameraName
Description: Camera name as set in the Quick Installation wizard or in the Ethernet Interface dialog in the Camera name fieldDevice
- Camera Serial NumberSNMP_AGENT1.3.6.1.4.1.21701.2.1.2.0camera.serialnumber6h0CHAROID name in MIB: cameraSerialNumber
Description: Serial number of the MOBOTIX cameraDevice
- Software VersionSNMP_AGENT1.3.6.1.4.1.21701.2.4.1.1.0camera.software.version1h0CHAROID name in MIB: softwareVersion
Description: Software version of the MOBOTIX cameraSoftware
- Software Version TimestampSNMP_AGENT1.3.6.1.4.1.21701.2.4.1.2.0camera.software.version.timestamp1h0CHAROID name in MIB: softwareVersionTimestamp
Description: Timestamp of the camera softwareSoftware
- Storage Remaining TimeSNMP_AGENT1.3.6.1.4.1.21701.2.3.9.0camera.storage.remainingtime10mminutesOID Name in MIB: storageArchiveBufferRemainingTime
Description: Estimated remaining time (in minutes) until overflow of the intermediate buffer (SD card) for archiving. Returns -1 if this data is not availableStorage{last(#2)}<1440Storage Low Time RemainingINFO
- Storage TypeSNMP_AGENT1.3.6.1.4.1.21701.2.3.3.0camera.storage.type6h0CHARStorage
- Storage Percent Used SpaceSNMP_AGENT1.3.6.1.4.1.21701.2.3.8.0camera.storage.usedspace10mFLOATOID in MIB: storageArchiveBufferFillLevel
Description: Indicates the fill level of the SD card (in percent) when used as an intermediate buffer for archiving. If it is at 100% there is a threat of data loss. Returns -1 if this data is not availableStorage{last(#2)}>80RECOVERY_EXPRESSION{last(#3)}<75Storage Low Free SpaceHIGH
- Storage FlashWearSNMP_AGENT1.3.6.1.4.1.21701.2.3.5.0camera.storage.wear10m%OID Name in MIB: storageFlashWear
Description: Flash wear of the storage (in percent)Storage{last(#2)}>65RECOVERY_EXPRESSION{last(#2)}<25Storage Flash Wear at 65%WARNING{last(#2)}>85RECOVERY_EXPRESSION{last(#2)}<25Storage Flash Wear at 85%HIGH
- Camera UptimeSNMP_AGENT1.3.6.1.4.1.21701.2.7.1.2.0camera.uptime10muptimeOID name in MIB: statusCurrentUptime
Description: Actual Uptime of the MOBOTIX camera (seconds)Device
{$SNMP_COMMUNITY}nriedaedc{Mobotix Camera:camera.storage.usedspace.last(#2)}=-1 or
{Mobotix Camera:camera.storage.remainingtime.last(#2)}=-1Storage FailedHIGHStorage Used Space2E7D32- Mobotix Cameracamera.storage.usedspace