5.02021-11-25T12:39:49ZTemplates SNMP DevicesCisco GeneralCisco GeneralTemplates SNMP DevicesBGP PeersOSPF InterfacesOSPF Neighbor StatesBGP PeersSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.15.3.1.1]bgpPeerIdentifier3000BGP4-MIB::bgpPeerIdentifierBGP Peer "{#SNMPINDEX}" StateSNMP_TRAPsnmptrap["(bgpBackwardTransition|cbgpFsmStateChange).*bgpPeerState\.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]"]05d0LOGBGP PeersyyyyMMdd.hhmmss{nodata(10m)}=0BGP Peer "{#SNMPINDEX}"->"{#SNMPVALUE}" State changedAVERAGEBGP Peer "{#SNMPINDEX}" StateSNMP_TRAPsnmptrap["(bgpEstablished|bgpBackwardTransition|cbgpFsmStateChange).*bgpPeerState\.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]"]05d0LOGBGP PeersyyyyMMdd.hhmmss{nodata(10m)}=0BGP Peer "{#SNMPINDEX}"->"{#SNMPVALUE}" State changedAVERAGEOSPF InterfacesSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.14.7.1.1]ospfIfIpAddress3000OSPF-MIB::ospfIfIpAddress
The IP address of this OSPF interface.OSPF Interface "{SNMPVALUE}" StateSNMP_TRAPsnmptrap["ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+"]05d0LOGOSPF InterfacesyyyyMMdd.hhmmss{nodata(10m)}=0OSPF Interface "{#SNMPVALUE}" State has been changedAVERAGEOSPF NeighborsSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.14.10.1.1]ospfNbrIpAddr3000OSPF-MIB::ospfNbrIpAddr
The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.OSPF "{#SNMPVALUE}" Neighbour StateSNMP_TRAPsnmptrap["(ospfNbrStateChange).*ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].*[[:space:]][a-zA-Z]+[[:space:]]$"]05d0LOGOSPF Neighbor StatesyyyyMMdd.hhmmss{nodata(10m)}=0OSPF Neighbor {#SNMPVALUE} has been changedAVERAGECisco_3500Cisco_3500Cisco GeneralCisco_TrapsTemplates SNMP DevicesAmperage SensorsCPUFAN SensorsFan TraysFlash DevicesLoad SensorsMemoryModulesPower SuppliesTemperatureVoltageVoltage SensorsFANSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.13.1.4.1.2]ciscoEnvMonFanStatusDescr3000CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr
Textual description of the fan being instrumented.Status of FAN "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.13.1.4.1.3.{#SNMPINDEX}ciscoEnvMonFanState["{#SNMPVALUE}"]60CISCO-ENVMON-MIB::ciscoEnvMonFanState
The current state of the fan being instrumented.FAN Sensors{last()}=3Status of FAN "{#SNMPVALUE}" is criticalAVERAGE{last()}=2Status of FAN "{#SNMPVALUE}" is non-operableWARNING{last()}=6Status of FAN "{#SNMPVALUE}" is not functioningAVERAGE{last()}=4Status of FAN "{#SNMPVALUE}" is shutdownHIGHPower SuppliesSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.13.1.5.1.2]ciscoEnvMonSupplyStatusDescr3000CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr
Textual description of the power supply being instrumented.Status of Power Supply "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.13.1.5.1.3.{#SNMPINDEX}ciscoEnvMonSupplyState["{#SNMPVALUE}"]60CISCO-ENVMON-MIB::ciscoEnvMonSupplyState
The current state of the power supply being instrumented.Power Supplies{last()}=3Status of Power Supply "{#SNMPVALUE}" is criticalAVERAGE{last()}=2Status of Power Supply "{#SNMPVALUE}" is non-operableWARNING{last()}=6Status of Power Supply "{#SNMPVALUE}" is not functioningAVERAGE{last()}=4Status of Power Supply "{#SNMPVALUE}" is shutdownHIGHTemperatureSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.13.1.3.1.2]ciscoEnvMonTemperatureStatusDescr3000CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusDescr
Textual description of the testpoint being instrumented.Status of Temperature "{#SNMPVALUE}"SNMP_AGENT.1.3.6.1.4.1.9.9.13.1.3.1.6.{#SNMPINDEX}ciscoEnvMonTemperatureState["{#SNMPVALUE}"]30CISCO-ENVMON-MIB::ciscoEnvMonTemperatureState
The current state of the testpoint being instrumented.Temperature{last()}=3Status of Temperature "{#SNMPVALUE}" is criticalAVERAGE{last()}=2Status of Temperature "{#SNMPVALUE}" is non-operableWARNING{last()}=6Status of Temperature "{#SNMPVALUE}" is not functioningAVERAGE{last()}=4Status of Temperature "{#SNMPVALUE}" is shutdownHIGHValue of Temperature "{#SNMPVALUE}"SNMP_AGENT.1.3.6.1.4.1.9.9.13.1.3.1.3.{#SNMPINDEX}ciscoEnvMonTemperatureStatusValue["{#SNMPVALUE}"]60°CCISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusValue
The current measurement of the testpoint being instrumented.TemperatureThreshold of Temperature "{#SNMPVALUE}"SNMP_AGENT.1.3.6.1.4.1.9.9.13.1.3.1.4.{#SNMPINDEX}ciscoEnvMonTemperatureThreshold["{#SNMPVALUE}"]3600°CCISCO-ENVMON-MIB::ciscoEnvMonTemperatureThreshold
The highest value that the associated instance of the object ciscoEnvMonTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated.TemperatureTemperature "{#SNMPVALUE}"C80000- Cisco_3500ciscoEnvMonTemperatureStatusValue["{#SNMPVALUE}"]
100C800- Cisco_3500ciscoEnvMonTemperatureThreshold["{#SNMPVALUE}"]
Flash DevicesSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.10.1.1.2.1.8]ciscoFlashDeviceDescr3000CISCO-FLASH-MIB::ciscoFlashDeviceDescr
Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are:
System flash - for the primary Flash used to store full system images.
Boot flash - for the secondary Flash used to store bootstrap images.
The device description will always be available for a removable device, even when the device has been removed.Size of Flash Device "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.10.1.1.2.1.2.{#SNMPINDEX}ciscoFlashDeviceSize["{#SNMPVALUE}"]3600BCISCO-FLASH-MIB::ciscoFlashDeviceSize
Total size of the Flash device. For a removable device, the size will be zero if the device has been removed.Flash DevicesMemory PoolSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.48.1.1.1.2]ciscoMemoryPoolName3000CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName
A textual name assigned to the memory pool.Free memory on Memory Pool "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.48.1.1.1.6.{#SNMPINDEX}ciscoMemoryPoolFree["{#SNMPVALUE}"]60BCISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree
Indicates the number of bytes from the memory pool that are currently unused on the managed device.MemoryName of Memory Pool "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.48.1.1.1.2.{#SNMPINDEX}ciscoMemoryPoolName["{#SNMPVALUE}"]36000CHARCISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName
A textual name assigned to the memory pool.MemoryTotal Memory Pool "$1"CALCULATEDciscoMemoryPoolTotal["{#SNMPVALUE}"]3600Blast("ciscoMemoryPoolFree[\"{#SNMPVALUE}\"]")+last("ciscoMemoryPoolUsed[\"{#SNMPVALUE}\"]")MemoryUsed memory on Memory Pool "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.48.1.1.1.5.{#SNMPINDEX}ciscoMemoryPoolUsed["{#SNMPVALUE}"]300BCISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed
Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.Memory{Cisco_3500:ciscoMemoryPoolUsed["{#SNMPVALUE}"].last()}>{Cisco_3500:ciscoMemoryPoolTotal["{#SNMPVALUE}"].last()}*0.9High utilization of Memory Pool "{#SNMPVALUE}"AVERAGECPUSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.109.1.1.1.1.2]cpmCPUTotalPhysicalIndex3000CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex
The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.CPU #$1 Usage 1min RevSNMP_AGENT.1.3.6.1.4.1.9.9.109.1.1.1.1.7.{#SNMPINDEX}cpmCPUTotal1minRev[{#SNMPINDEX}]60%CISCO-PROCESS-MIB::cpmCPUTotal1minRev
The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100).CPUCPU #$1 Usage 5min RevSNMP_AGENT.1.3.6.1.4.1.9.9.109.1.1.1.1.8.{#SNMPINDEX}cpmCPUTotal5minRev[{#SNMPINDEX}]300%CISCO-PROCESS-MIB::cpmCPUTotal5minRev
The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100).CPU{last()}>95High CPU #{#SNMPINDEX} UsageHIGHCPU #$1 Usage 5sec RevSNMP_AGENT.1.3.6.1.4.1.9.9.109.1.1.1.1.6.{#SNMPINDEX}cpmCPUTotal5secRev[{#SNMPINDEX}]30DISABLED%CISCO-PROCESS-MIB::cpmCPUTotal5secRev
The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue.CPUCPU #{#SNMPINDEX} Usage00C800- Cisco_3500cpmCPUTotal1minRev[{#SNMPINDEX}]
1C80000- Cisco_3500cpmCPUTotal5minRev[{#SNMPINDEX}]
Cisco_TrapsCisco_TrapsTemplates SNMP DevicesSNMP Traps- BGP Peer StateSNMP_TRAPsnmptrap["bgpPeerState|cbgpPeer2State"]00DISABLEDLOGBGP4-MIB::bgpPeerState
CISCO-BGP4-MIB::cbgpPeer2State
The BGP peer connection state.SNMP TrapsyyyyMMdd.hhmmss{count(10m,"idle","like")}>0 and {nodata(10m)}=0BGP Peer State is idleWARNING
- Source of CommandSNMP_TRAPsnmptrap["ccmHistoryEventCommandSource"]000LOGSNMP TrapsyyyyMMdd.hhmmss
- BFD SessionsSNMP_TRAPsnmptrap["ciscoBfdSess(Up|Down)"]05d0LOGCISCO-IETF-BFD-MIB::ciscoBfdSessDown and ciscoBfdSessUpSNMP TrapsyyyyMMdd.hhmmss
- Attack Filter changesSNMP_TRAPsnmptrap["cscaFilterChange"]000LOGThe system generates this notification to indicate that the cscaFilterStatus of the attack filter for cscaType has changed due to the reason determined by cscaDescription. The system limits the generation of this notifications for the same cscaType to a five-second interval.SNMP TrapsyyyyMMdd.hhmmss
- Status of Attack FilterSNMP_TRAPsnmptrap["cscaFilterStatus"]000LOGSNMP TrapsyyyyMMdd.hhmmss
- SSH SessionsSNMP_TRAPsnmptrap["cssSessionHostAddr"]05d0LOGCISCO-SECURE-SHELL-MIB::cssSessionHostAddrSNMP TrapsyyyyMMdd.hhmmss
- MPLS L3 StateSNMP_TRAPsnmptrap["mplsL3VpnVrf[Up|Down]"]00LOGMPLS-L3VPN-STD-MIB::mplsL3VpnVrfUp
MPLS-L3VPN-STD-MIB::mplsL3VpnVrfDownSNMP TrapsyyyyMMdd.hhmmss{str(Down)}=1MPLS L3 is downAVERAGE
- OSPF Interface StateSNMP_TRAPsnmptrap["ospfIfState"]00DISABLEDLOGOSPF-MIB::ospfIfState
The OSPF Interface State.SNMP TrapsyyyyMMdd.hhmmss{count(10m,"down","like")}>0 and {nodata(10m)}=0OSPF Interface State is downWARNING{count(10m,"loopback","like")}>0 and {nodata(10m)}=0OSPF Interface State is loopbackWARNING{count(10m,"waiting","like")}>0 and {nodata(10m)}=0OSPF Interface State is waitingWARNING
- LSA aged to MaxAgeSNMP_TRAPsnmptrap["ospfMaxAgeLsa"]000LOGSNMP TrapsyyyyMMdd.hhmmss
- OSPF neighbour stateSNMP_TRAPsnmptrap["ospfNbrStateChange.*ospfNbrState[[:space:]]"]000DISABLEDLOG1 : down
2 : attempt
3 : init
4 : twoWay
5 : exchangeStart
6 : exchange
7 : loading
8 : fullSNMP TrapsyyyyMMdd.hhmmss
- LSA has been originatedSNMP_TRAPsnmptrap["ospfOriginateLsa"]05d0LOGOSPF-TRAP-MIB::ospfOriginateLsaSNMP TrapsyyyyMMdd.hhmmss
- OSP TX RetransmitsSNMP_TRAPsnmptrap["ospfTxRetransmit"]01d0LOGSNMP TrapsyyyyMMdd.hhmmss{count(1h,"ospfTxRetransmit","like")}>30 and {nodata(1h)}=0Many OSPF TX RetransmitsWARNING
- Type of remote sessionSNMP_TRAPsnmptrap["tslineSesType"]000LOGSNMP TrapsyyyyMMdd.hhmmss