5.02021-11-25T12:40:15ZTemplates SNMP DevicesCisco GeneralCisco GeneralTemplates SNMP DevicesBGP PeersOSPF InterfacesOSPF Neighbor StatesBGP PeersSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.15.3.1.1]bgpPeerIdentifier3000BGP4-MIB::bgpPeerIdentifierBGP Peer "{#SNMPINDEX}" StateSNMP_TRAPsnmptrap["(bgpBackwardTransition|cbgpFsmStateChange).*bgpPeerState\.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]"]05d0LOGBGP PeersyyyyMMdd.hhmmss{nodata(10m)}=0BGP Peer "{#SNMPINDEX}"->"{#SNMPVALUE}" State changedAVERAGEBGP Peer "{#SNMPINDEX}" StateSNMP_TRAPsnmptrap["(bgpEstablished|bgpBackwardTransition|cbgpFsmStateChange).*bgpPeerState\.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]"]05d0LOGBGP PeersyyyyMMdd.hhmmss{nodata(10m)}=0BGP Peer "{#SNMPINDEX}"->"{#SNMPVALUE}" State changedAVERAGEOSPF InterfacesSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.14.7.1.1]ospfIfIpAddress3000OSPF-MIB::ospfIfIpAddress
The IP address of this OSPF interface.OSPF Interface "{SNMPVALUE}" StateSNMP_TRAPsnmptrap["ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+"]05d0LOGOSPF InterfacesyyyyMMdd.hhmmss{nodata(10m)}=0OSPF Interface "{#SNMPVALUE}" State has been changedAVERAGEOSPF NeighborsSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.14.10.1.1]ospfNbrIpAddr3000OSPF-MIB::ospfNbrIpAddr
The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.OSPF "{#SNMPVALUE}" Neighbour StateSNMP_TRAPsnmptrap["(ospfNbrStateChange).*ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].*[[:space:]][a-zA-Z]+[[:space:]]$"]05d0LOGOSPF Neighbor StatesyyyyMMdd.hhmmss{nodata(10m)}=0OSPF Neighbor {#SNMPVALUE} has been changedAVERAGECisco_ASR_1006Cisco_ASR_1006Cisco GeneralCisco_TrapsTemplates SNMP DevicesAmperage SensorsCPUFAN SensorsFan TraysFlash DevicesMemoryModulesOptic Power SensorsPower SuppliesTemperatureVoltageVoltage Sensors- snmptrap (IF Down)SNMP_TRAPsnmptrap[.1.3.6.1.6.3.1.1.5.3]00LOG
- snmptrap (IF Up)SNMP_TRAPsnmptrap[.1.3.6.1.6.3.1.1.5.4]00LOG
- snmptrap (OSPF Neighbor Up/Down)SNMP_TRAPsnmptrap[1.3.6.1.2.1.14.16.2.2]00LOG
- snmptrap (BGP Neighbor Up/Down)SNMP_TRAPsnmptrap[1.3.6.1.2.1.15.3.1.2|1.3.6.1.4.1.9.9.187.1.2.5.1.3]00LOG
Flash DevicesSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.10.1.1.2.1.8]ciscoFlashDeviceDescr3000CISCO-FLASH-MIB::ciscoFlashDeviceDescr
Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are:
System flash - for the primary Flash used to store full system images.
Boot flash - for the secondary Flash used to store bootstrap images.
The device description will always be available for a removable device, even when the device has been removed.Size of Flash Device "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.10.1.1.2.1.16.{#SNMPINDEX}ciscoFlashDeviceSizeExtended["{#SNMPVALUE}"]3600BCISCO-FLASH-MIB::ciscoFlashDeviceSizeExtended
Total size of the Flash device. For a removable device, the size will be zero if the device has been removed.
This object is a 64-bit version of ciscoFlashDeviceSize.Flash DevicesMemory PoolSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.48.1.1.1.2]ciscoMemoryPoolName3000CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName
A textual name assigned to the memory pool.Free memory on Memory Pool "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.48.1.1.1.6.{#SNMPINDEX}ciscoMemoryPoolFree["{#SNMPVALUE}"]60BCISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree
Indicates the number of bytes from the memory pool that are currently unused on the managed device.MemoryName of Memory Pool "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.48.1.1.1.2.{#SNMPINDEX}ciscoMemoryPoolName["{#SNMPVALUE}"]36000CHARCISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName
A textual name assigned to the memory pool.MemoryUsed memory on Memory Pool "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.48.1.1.1.5.{#SNMPINDEX}ciscoMemoryPoolUsed["{#SNMPVALUE}"]300BCISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed
Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.Memory{Cisco_ASR_1006:ciscoMemoryPoolFree["{#SNMPVALUE}"].last()}<({Cisco_ASR_1006:ciscoMemoryPoolUsed["{#SNMPVALUE}"].last()}+{Cisco_ASR_1006:ciscoMemoryPoolFree["{#SNMPVALUE}"].last()})*0.05 and {Cisco_ASR_1006:ciscoMemoryPoolName["{#SNMPVALUE}"].str(lsmpi_io)}=0High utilization of Memory Pool "{#SNMPVALUE}"AVERAGECPUSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.9.9.109.1.1.1.1.2]cpmCPUTotalPhysicalIndex3000CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex
The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.CPU #$1 Usage 1min RevSNMP_AGENT.1.3.6.1.4.1.9.9.109.1.1.1.1.7.{#SNMPINDEX}cpmCPUTotal1minRev[{#SNMPINDEX}]60%CISCO-PROCESS-MIB::cpmCPUTotal1minRev
The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100).CPUCPU #$1 Usage 5min RevSNMP_AGENT.1.3.6.1.4.1.9.9.109.1.1.1.1.8.{#SNMPINDEX}cpmCPUTotal5minRev[{#SNMPINDEX}]300%CISCO-PROCESS-MIB::cpmCPUTotal5minRev
The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100).CPU{last()}>95High CPU #{#SNMPINDEX} UsageHIGHCPU #$1 Usage 5sec RevSNMP_AGENT.1.3.6.1.4.1.9.9.109.1.1.1.1.6.{#SNMPINDEX}cpmCPUTotal5secRev[{#SNMPINDEX}]30DISABLED%CISCO-PROCESS-MIB::cpmCPUTotal5secRev
The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue.CPUCPU #{#SNMPINDEX} Usage00C800- Cisco_ASR_1006cpmCPUTotal1minRev[{#SNMPINDEX}]
1C80000- Cisco_ASR_1006cpmCPUTotal5minRev[{#SNMPINDEX}]
$1 SensorsSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.47.1.1.1.1.7]entPhysicalName["Optic Power"]300{#SNMPVALUE}[T|R]x Power Sensor$A0The textual name of the physical entity.Status of $2 Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.5.{#SNMPINDEX}entSensorStatus["{#SNMPVALUE}","Optic Power"]60CISCO-ENTITY-SENSOR-MIB::entSensorStatus
This variable indicates the present operational status of the sensor.Optic Power Sensors{last()}=3Status of Optic Power Sensor "{#SNMPVALUE}" is nonoperationalHIGH{last()}=2Status of Optic Power Sensor "{#SNMPVALUE}" is unavailableAVERAGEValue of $2 Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.4.{#SNMPINDEX}entSensorValue["{#SNMPVALUE}","Optic Power"]60FLOATdBmCISCO-ENTITY-SENSOR-MIB::entSensorValue
This variable reports the most recent measurement seen by the sensor.Optic Power Sensors$1 SensorsSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.47.1.1.1.1.7]entPhysicalName["Power Supply"]300{#SNMPVALUE}^power\-moduleA0The textual name of the physical entity.Current Supplied by $2 "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.117.1.1.2.1.3.{#SNMPINDEX}cefcFRUCurrent["{#SNMPVALUE}","Power Supply"]600FLOATWCISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUCurrent
Current supplied by the FRU (positive values) or current required to operate the FRU (negative values).Power SuppliesOperational Status of $2 "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.117.1.1.2.1.2.{#SNMPINDEX}cefcFRUPowerOperStatus["{#SNMPVALUE}","Power Supply"]60CISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUPowerOperStatus
Operational FRU power state.Power Supplies{last()}=11Connector rating exceeded on Power Supply "{#SNMPVALUE}"AVERAGE{last()}=10Cooling capacity is insufficient on Power Supply "{#SNMPVALUE}"HIGH{last()}=9FAN failed on Power Supply "{#SNMPVALUE}"WARNING{last()}=7FAN problem on Power Supply "{#SNMPVALUE}"AVERAGE{last()}=5Power problem on Power Supply "{#SNMPVALUE}"AVERAGE{last()}=8 and {last()}=12Power Supply "{#SNMPVALUE}" is failedHIGH{last()}=1Power Supply "{#SNMPVALUE}" is powered offWARNING{last()}=4System power is insufficient on Power Supply "{#SNMPVALUE}"HIGH{last()}=6Temperature problem on Power Supply "{#SNMPVALUE}"HIGHManufacturer of $2 "$1"SNMP_AGENT.1.3.6.1.2.1.47.1.1.1.1.12.{#SNMPINDEX}entPhysicalMfgName["{#SNMPVALUE}","Power Supply"]864000CHARENTITY-MIB::entPhysicalMfgName
The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).Power SuppliesModel Name of $2 "$1"SNMP_AGENT.1.3.6.1.2.1.47.1.1.1.1.13.{#SNMPINDEX}entPhysicalModelName["{#SNMPVALUE}","Power Supply"]864000CHARENTITY-MIB::entPhysicalModelName
The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.Power SuppliesSerial Number of $2 "$1"SNMP_AGENT.1.3.6.1.2.1.47.1.1.1.1.11.{#SNMPINDEX}entPhysicalSerialNum["{#SNMPVALUE}","Power Supply"]36000CHARENTITY-MIB::entPhysicalSerialNum
The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).Power Supplies$1 SensorsSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.47.1.1.1.1.7]entPhysicalName[Amperage]300{#SNMPVALUE}Bias Current Sensor$A0The textual name of the physical entity.Status of $2 Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.5.{#SNMPINDEX}entSensorStatus["{#SNMPVALUE}",Amperage]60CISCO-ENTITY-SENSOR-MIB::entSensorStatus
This variable indicates the present operational status of the sensor.Amperage Sensors{last()}=3Amperage Sensor "{#SNMPVALUE}" is nonoperationalHIGH{last()}=2Amperage Sensor "{#SNMPVALUE}" is unavailableAVERAGE$2 of Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.4.{#SNMPINDEX}entSensorValue["{#SNMPVALUE}",Amperage]60FLOATACISCO-ENTITY-SENSOR-MIB::entSensorValue
This variable reports the most recent measurement seen by the sensor.Amperage SensorsMULTIPLIER0.000001$1 SensorsSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.47.1.1.1.1.7]entPhysicalName[Module]300{#SNMPVALUE}^moduleA0The textual name of the physical entity.Manufacturer of $2 "$1"SNMP_AGENT.1.3.6.1.2.1.47.1.1.1.1.12.{#SNMPINDEX}entPhysicalMfgName["{#SNMPVALUE}","Module"]864000CHARENTITY-MIB::entPhysicalMfgName
The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).ModulesModel Name of $2 "$1"SNMP_AGENT.1.3.6.1.2.1.47.1.1.1.1.13.{#SNMPINDEX}entPhysicalModelName["{#SNMPVALUE}","Module"]864000CHARENTITY-MIB::entPhysicalModelName
The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.ModulesSerial Number of $2 "$1"SNMP_AGENT.1.3.6.1.2.1.47.1.1.1.1.11.{#SNMPINDEX}entPhysicalSerialNum["{#SNMPVALUE}","Module"]36000CHARENTITY-MIB::entPhysicalSerialNum
The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).ModulesOperational Status of $2 "$1"SNMP_AGENT.1.3.6.1.2.1.131.1.1.1.3.{#SNMPINDEX}entStateOper["{#SNMPVALUE}","Module"]60ENTITY-STATE-MIB::entStateOper
The operational state for this entity.Modules{last()}=2Module "{#SNMPVALUE}" is inoperableDISASTER$1 Sensors (3)SNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.47.1.1.1.1.7]entPhysicalName[Temperature,3]300{#SNMPVALUE}Temperature Sensor$A0The textual name of the physical entity.Status of $2 Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.5.{#SNMPINDEX}entSensorStatus["{#SNMPVALUE}",Temperature,3]60CISCO-ENTITY-SENSOR-MIB::entSensorStatus
This variable indicates the present operational status of the sensor.Temperature{last()}=3Temperature Sensor "{#SNMPVALUE}" is nonoperationalHIGH{last()}=2Temperature Sensor "{#SNMPVALUE}" is unavailableAVERAGE$2 on Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.4.{#SNMPINDEX}entSensorValue["{#SNMPVALUE}",Temperature,3]60FLOAT°CCISCO-ENTITY-SENSOR-MIB::entSensorValue
This variable reports the most recent measurement seen by the sensor.TemperatureMULTIPLIER0.001$1 SensorsSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.47.1.1.1.1.7]entPhysicalName[Temperature]300{#SNMPVALUE}^Temp\:A0The textual name of the physical entity.Status of $2 Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.5.{#SNMPINDEX}entSensorStatus["{#SNMPVALUE}",Temperature]60CISCO-ENTITY-SENSOR-MIB::entSensorStatus
This variable indicates the present operational status of the sensor.Temperature{last()}=3Temperature Sensor "{#SNMPVALUE}" is nonoperationalHIGH{last()}=2Temperature Sensor "{#SNMPVALUE}" is unavailableAVERAGE$2 on Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.4.{#SNMPINDEX}entSensorValue["{#SNMPVALUE}",Temperature]60FLOAT°CCISCO-ENTITY-SENSOR-MIB::entSensorValue
This variable reports the most recent measurement seen by the sensor.Temperature$1 SensorsSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.47.1.1.1.1.7]entPhysicalName[Voltage]300{#SNMPVALUE}voltageA0The textual name of the physical entity.Status of $2 Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.5.{#SNMPINDEX}entSensorStatus["{#SNMPVALUE}",Voltage]60CISCO-ENTITY-SENSOR-MIB::entSensorStatus
This variable indicates the present operational status of the sensor.Voltage Sensors{last()}=3Voltage Sensor "{#SNMPVALUE}" is nonoperationalHIGH{last()}=2Voltage Sensor "{#SNMPVALUE}" is unavailableAVERAGE$2 on Sensor "$1"SNMP_AGENT.1.3.6.1.4.1.9.9.91.1.1.1.1.4.{#SNMPINDEX}entSensorValue["{#SNMPVALUE}",Voltage]60FLOATVCISCO-ENTITY-SENSOR-MIB::entSensorValue
This variable reports the most recent measurement seen by the sensor.Voltage SensorsMULTIPLIER0.001Cisco_TrapsCisco_TrapsTemplates SNMP DevicesSNMP Traps- BGP Peer StateSNMP_TRAPsnmptrap["bgpPeerState|cbgpPeer2State"]00DISABLEDLOGBGP4-MIB::bgpPeerState
CISCO-BGP4-MIB::cbgpPeer2State
The BGP peer connection state.SNMP TrapsyyyyMMdd.hhmmss{count(10m,"idle","like")}>0 and {nodata(10m)}=0BGP Peer State is idleWARNING
- Source of CommandSNMP_TRAPsnmptrap["ccmHistoryEventCommandSource"]000LOGSNMP TrapsyyyyMMdd.hhmmss
- BFD SessionsSNMP_TRAPsnmptrap["ciscoBfdSess(Up|Down)"]05d0LOGCISCO-IETF-BFD-MIB::ciscoBfdSessDown and ciscoBfdSessUpSNMP TrapsyyyyMMdd.hhmmss
- Attack Filter changesSNMP_TRAPsnmptrap["cscaFilterChange"]000LOGThe system generates this notification to indicate that the cscaFilterStatus of the attack filter for cscaType has changed due to the reason determined by cscaDescription. The system limits the generation of this notifications for the same cscaType to a five-second interval.SNMP TrapsyyyyMMdd.hhmmss
- Status of Attack FilterSNMP_TRAPsnmptrap["cscaFilterStatus"]000LOGSNMP TrapsyyyyMMdd.hhmmss
- SSH SessionsSNMP_TRAPsnmptrap["cssSessionHostAddr"]05d0LOGCISCO-SECURE-SHELL-MIB::cssSessionHostAddrSNMP TrapsyyyyMMdd.hhmmss
- MPLS L3 StateSNMP_TRAPsnmptrap["mplsL3VpnVrf[Up|Down]"]00LOGMPLS-L3VPN-STD-MIB::mplsL3VpnVrfUp
MPLS-L3VPN-STD-MIB::mplsL3VpnVrfDownSNMP TrapsyyyyMMdd.hhmmss{str(Down)}=1MPLS L3 is downAVERAGE
- OSPF Interface StateSNMP_TRAPsnmptrap["ospfIfState"]00DISABLEDLOGOSPF-MIB::ospfIfState
The OSPF Interface State.SNMP TrapsyyyyMMdd.hhmmss{count(10m,"down","like")}>0 and {nodata(10m)}=0OSPF Interface State is downWARNING{count(10m,"loopback","like")}>0 and {nodata(10m)}=0OSPF Interface State is loopbackWARNING{count(10m,"waiting","like")}>0 and {nodata(10m)}=0OSPF Interface State is waitingWARNING
- LSA aged to MaxAgeSNMP_TRAPsnmptrap["ospfMaxAgeLsa"]000LOGSNMP TrapsyyyyMMdd.hhmmss
- OSPF neighbour stateSNMP_TRAPsnmptrap["ospfNbrStateChange.*ospfNbrState[[:space:]]"]000DISABLEDLOG1 : down
2 : attempt
3 : init
4 : twoWay
5 : exchangeStart
6 : exchange
7 : loading
8 : fullSNMP TrapsyyyyMMdd.hhmmss
- LSA has been originatedSNMP_TRAPsnmptrap["ospfOriginateLsa"]05d0LOGOSPF-TRAP-MIB::ospfOriginateLsaSNMP TrapsyyyyMMdd.hhmmss
- OSP TX RetransmitsSNMP_TRAPsnmptrap["ospfTxRetransmit"]01d0LOGSNMP TrapsyyyyMMdd.hhmmss{count(1h,"ospfTxRetransmit","like")}>30 and {nodata(1h)}=0Many OSPF TX RetransmitsWARNING
- Type of remote sessionSNMP_TRAPsnmptrap["tslineSesType"]000LOGSNMP TrapsyyyyMMdd.hhmmss