5.02021-11-21T21:41:14ZTemplatesSNMP Cisco IPSecSNMP Cisco IPSecTemplatesIPSec Phase1IPSec Phase2- Number of currently active IPsec Phase1 TunnelsSNMP_AGENT1.3.6.1.4.1.9.9.171.1.2.1.1.0cikeGlobalActiveTunnels60The number of currently active IPsec Phase-1 IKE Tunnels.IPSec Phase1
- Incoming traffic on active IPSec Phase1 TunnelsSNMP_AGENT1.3.6.1.4.1.9.9.171.1.2.1.3.0cikeGlobalInOctets60b/secThe total number of octets received by all currently and previously active IPsec Phase-1 IKE Tunnels.IPSec Phase1CHANGE_PER_SECONDMULTIPLIER8
- Outgoing traffic on active IPSec Phase1 TunnelsSNMP_AGENT1.3.6.1.4.1.9.9.171.1.2.1.11.0cikeGlobalOutOctets60b/secThe total number of octets sent by all currently and previously active and IPsec Phase-1 IKE Tunnels.IPSec Phase1CHANGE_PER_SECONDMULTIPLIER8
- Number of currently active IPsec Phase2 TunnelsSNMP_AGENT1.3.6.1.4.1.9.9.171.1.3.1.1.0cipSecGlobalActiveTunnels60The total number of currently active IPsec Phase-2 Tunnels.IPSec Phase2
- Incoming traffic on active IPSec Phase2 TunnelsSNMP_AGENT1.3.6.1.4.1.9.9.171.1.3.1.3.0cipSecGlobalInOctets60b/secThe total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecGlobalInOctWraps for the number of times this counter has wrapped.IPSec Phase2CHANGE_PER_SECONDMULTIPLIER8
- Outgoing traffic on active IPSec Phase2 TunnelsSNMP_AGENT1.3.6.1.4.1.9.9.171.1.3.1.16.0cipSecGlobalOutOctets60b/secThe total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecGlobalOutOctWraps for the number of times this counter has wrapped.IPSec Phase2CHANGE_PER_SECONDMULTIPLIER8
IPSec Phase1 Tunnel discoverySNMP_AGENTdiscovery[{#SNMPVALUE}, 1.3.6.1.4.1.9.9.171.1.2.3.1.7]cikeTunIndex607dPhase1 Peer {#SNMPVALUE} tunnel active timeSNMP_AGENT1.3.6.1.4.1.9.9.171.1.2.3.1.16.{#SNMPINDEX}cikeTunActiveTime[{#SNMPINDEX}]300sThe length of time the IPsec Phase-1 IKE tunnel has been active in hundredths of seconds.IPSec Phase1MULTIPLIER0.01Phase1 Peer {#SNMPVALUE} inbound trafficSNMP_AGENT1.3.6.1.4.1.9.9.171.1.2.3.1.19.{#SNMPINDEX}cikeTunInOctets[{#SNMPINDEX}]60b/secThe total number of octets received by this IPsec Phase-1 IKE Tunnel.IPSec Phase1CHANGE_PER_SECONDMULTIPLIER8Phase1 Peer {#SNMPVALUE} local peer identitySNMP_AGENT1.3.6.1.4.1.9.9.171.1.2.3.1.3.{#SNMPINDEX}cikeTunLocalValue[{#SNMPINDEX}]3000TEXTThe value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is a host name, then this is the host name used to identify the local peer.IPSec Phase1Phase1 Peer {#SNMPVALUE} outbound trafficSNMP_AGENT1.3.6.1.4.1.9.9.171.1.2.3.1.27.{#SNMPINDEX}cikeTunOutOctets[{#SNMPINDEX}]60b/secThe total number of octets sent by this IPsec Phase-1 IKE Tunnel.IPSec Phase1CHANGE_PER_SECONDMULTIPLIER8Phase1 Peer {#SNMPVALUE} remote peer identitySNMP_AGENT1.3.6.1.4.1.9.9.171.1.2.3.1.7.{#SNMPINDEX}cikeTunRemoteValue[{#SNMPINDEX}]3000TEXTThe value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is a host name, then this is the host name used to identify the remote peer.IPSec Phase1IPSec Phase2 Tunnel discoverySNMP_AGENTdiscovery[{#SNMPVALUE}, 1.3.6.1.4.1.9.9.171.1.3.2.1.5]cipSecTunIndex607dThe IP address of the remote endpoint for the IPsec Phase-2 Tunnel.Phase2 Peer {#SNMPVALUE} tunnel active timeSNMP_AGENT1.3.6.1.4.1.9.9.171.1.3.2.1.10.{#SNMPINDEX}cipSecTunActiveTime[{#SNMPINDEX}]60sThe length of time the IPsec Phase-2 Tunnel has been active in hundredths of seconds.IPSec Phase2MULTIPLIER0.01Phase2 Peer {#SNMPVALUE} inbound trafficSNMP_AGENT1.3.6.1.4.1.9.9.171.1.3.2.1.26.{#SNMPINDEX}cipSecTunInOctets[{#SNMPINDEX}]60b/secThe total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also cipSecTunInOctWraps for the number of times this counter has wrapped.IPSec Phase2CHANGE_PER_SECONDMULTIPLIER8Phase2 Peer {#SNMPVALUE} tunnel local addressSNMP_AGENT1.3.6.1.4.1.9.9.171.1.3.2.1.4.{#SNMPINDEX}cipSecTunLocalAddr[{#SNMPINDEX}]600TEXTThe IP address of the local endpoint for the IPsec Phase-2 Tunnel.IPSec Phase2Phase2 Peer {#SNMPVALUE} outbound trafficSNMP_AGENT1.3.6.1.4.1.9.9.171.1.3.2.1.39.{#SNMPINDEX}cipSecTunOutOctets[{#SNMPINDEX}]60b/secThe total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. See also cipSecTunOutOctWraps for the number of times this counter has wrapped.IPSec Phase2CHANGE_PER_SECONDMULTIPLIER8Phase2 Peer {#SNMPVALUE} tunnel remoteaddressSNMP_AGENT1.3.6.1.4.1.9.9.171.1.3.2.1.5.{#SNMPINDEX}cipSecTunRemoteAddr[{#SNMPINDEX}]600TEXTThe IP address of the remote endpoint for the IPsec Phase-2 Tunnel.IPSec Phase2