5.02021-11-21T21:40:41ZTemplatesSNMP HP Server HealthSNMP HP Server HealthTemplatesASR HealthFAN HealthMemory HealthPower HealthStorage HealthSystem HealthTemp Health- Global Storage HealthSNMP_AGENT1.3.6.1.4.1.232.3.1.3.0cpqDaMibCondition60sThe overall condition (status) of the system represented by this MIB.Storage HealthHP Insight System Status{last()}<>2The storage overall condition on {HOST.NAME} not in OK statusHIGH
- Automatic Server Recovery conditionSNMP_AGENT1.3.6.1.4.1.232.6.2.5.17.0cpqHeAsrCondition60This value specifies the overall condition of the ASR feature.ASR HealthHP Insight System Status{last()}<>2Automatic Server Recovery condition on {HOST.NAME} not in OK statusHIGH
- Automatic Server Recovery statusSNMP_AGENT1.3.6.1.4.1.232.6.2.5.1.0cpqHeAsrStatus60sThe Automatic Server Recovery feature status. If this object is currently other(1) or notAvailable(2) all set operations will fail. Any attempt to set this object to other(1) or notAvailable(2) by a management station will fail. Setting this object to disabled(3) or enabled(4) will disable or enable the ASR feature. Setting this object to disabled(3) will disable the following objects: cpqHeAsrPagerStatus cpqHeAsrDialInStatus cpqHeAsrDialOutStatusASR HealthHP ASR Status
- Event Log ConditionSNMP_AGENT1.3.6.1.4.1.232.6.2.11.2.0cpqHeEventLogCondition60sThis value specifies the overall condition of the Integrated Management Log feature.System HealthHP Insight System Status{last()}<>2Event Log condition on {HOST.NAME} not in OK statusHIGH
- Power supply conditionSNMP_AGENT1.3.6.1.4.1.232.6.2.9.1.0cpqHeFltTolPwrSupplyCondition60sThis value specifies the overall condition of the fault tolerant power supply sub-system.Power HealthHP Insight System Status{last()}<>2Power supply condition on {HOST.NAME} not in OK statusHIGH
- Global System HealthSNMP_AGENT1.3.6.1.4.1.232.6.1.3.0cpqHeMibCondition60sThe overall condition. This object represents the overall status of the server health system represented by this MIB.System HealthHP Insight System Status{last()}<>2The overall condition on {HOST.NAME} not in OK statusHIGH
- Memory StatusSNMP_AGENT1.3.6.1.4.1.232.6.2.14.4.0cpqHeResilientMemCondition60sThis value specifies the current condition of the Advanced Memory Protection subsystem. The following states are supported: other(1) The system does not support fault tolerant memory or the state cannot be determined by the Management Agent. ok(2) This system is operating normally. degraded(3) The system is running in a degraded state because the Advanced Memory Protection subsystem has been engaged.Memory HealthHP Insight System Status{last()}<>2Memory condition on {HOST.NAME} not in OK statusHIGH
- Total Memory SizeSNMP_AGENT1.3.6.1.4.1.232.6.2.14.8.0cpqHeResilientMemTotalMemSize1hMBThis value specifies the total size of memory including memory seen by the Operating System and the memory used for spare, mirrored, or RAID configurations in MB (1 MB = 1048576 bytes). If this system does not support Advanced Memory Protection or this value cannot be determined, then a value of 0 will be returned.Memory Health
- Advanced Memory Protection typeSNMP_AGENT1.3.6.1.4.1.232.6.2.14.1.0cpqHeResilientMemTypeActive60This value specifies the type of Advanced Memory Protection fault tolerance currently active on the system. The following connection states are supported: other(1) The Advanced Memory Protection fault tolerance cannot be determined by the Management Agent. You may need to upgrade your software. none(2) This system is not configured for Advanced Memory Protection fault tolerance or Advanced Memory Protection is not available on this system. onLineSpare(3) This system is configured for Online Spare Advanced Memory Protection. mirrored(4) This system is configured for Mirrored Advanced Memory Protection. advancedECC(5) This system is configured for the Advanced ECC type of Advanced Memory Protection. mirroredSingleBoard(6) This system is configured for Mirrored Advanced Memory Protection within a single memory board. mirroredDualBoard(7) This system is configured for Mirrored Advanced Memory Protection within a dual memory board configuration. The mirrored memory may be swapped with memory on the same memory board or with memory on the second memory board. xor(8) This system is configured for Advanced Memory Protection using the XOR engine. lockStep(9) This system is configured for LockStep type of Advanced Memory Protection. onLineSpareChannel(10) This system is configured for Online Spare Channel Advanced Memory Protection. onLineSpareRank(11) This system is configured for Online Spare Rank Advanced Memory Protection. mirroringIntrasocket(12) This system is configured for Mirrored Intrasocket Advanced Memory Protection between memory of single processor or board. mirroringIntersocket(13) This system is configured for Mirrored Intersocket Advanced Memory Protection between memory of two processors or boards.Memory HealthHP Memory Protection Types
- Overall Thermal conditionSNMP_AGENT1.3.6.1.4.1.232.6.2.6.1.0cpqHeThermalCondition60sThis value specifies the overall condition of the system's thermal environment.Temp HealthHP Insight System Status{last()}<>2Overall Thermal condition on {HOST.NAME} not in OK statusHIGH
- CPU Fan StatusSNMP_AGENT1.3.6.1.4.1.232.6.2.6.5.0cpqHeThermalCPUFanStatus60sThe status of the processor fan(s) in the system. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) All fans are operating properly. failed(4) A fan is not operating properly. The system will be shutdown if the failed(4) condition occurs.FAN HealthHP Insight System Status{last()}=4CPU Fan Status on {HOST.NAME} failedHIGH
- System Fan StatusSNMP_AGENT1.3.6.1.4.1.232.6.2.6.4.0cpqHeThermalSystemFanStatus60sThe status of the fan(s) in the system. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) All fans are operating properly. degraded(3) A non-required fan is not operating properly. failed(4) A required fan is not operating properly. If the cpqHeThermalDegradedAction is set to shutdown(3) the system will be shutdown if the failed(4) condition occurs.FAN HealthHP Insight System Status{last()}<>2System Fan Status on {HOST.NAME} not in OK statusHIGH
- Temp StatusSNMP_AGENT1.3.6.1.4.1.232.6.2.6.3.0cpqHeThermalSystemTempStatus60sThe status of the system's temperature sensors: This value will be one of the following: other(1) Temp sensing is not supported by this system or driver. ok(2) All temp sensors are within normal operating range. degraded(3) A temp sensor is outside of normal operating range. failed(4) A temp sensor detects a condition that could permanently damage the system. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent. If the cpqHeThermalDegradedAction is set to shutdown(3) the system will be shutdown if the degraded(3) condition occurs.Temp HealthHP Insight System Status
Array Accelerator Board ControllerSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.232.3.2.2.2.1.1]cpqDaAccelCntlrIndex-[{#SNMPVALUE}]1hArray Accelerator Board Controller Index. This value is a logical number whose meaning is OS dependent. The value has a direct mapping to the controller table index such that controller 'i' has accelerator table entry 'i'.Array Accelerator Board Controller $1 StatusSNMP_AGENT1.3.6.1.4.1.232.3.2.2.2.1.9.{#SNMPINDEX}cpqDaAccelCondition[{#SNMPVALUE}]60sThe condition of the device. This value represents the overall condition of this array accelerator.Storage HealthHP Insight System Status{last()}=1Array Accelerator Board Controller [{#SNMPVALUE}] need check (Other)WARNING{last()}>2Array Accelerator Board Controller [{#SNMPVALUE}] not OKHIGHRAID ControllerSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.232.3.2.2.1.1.1]cpqDaCntlrIndex-[{#SNMPVALUE}]1hArray Controller Index. This value is a logical number whose meaning is OS dependent. Each physical controller has one unique controller number associated with it.RAID Controller $1 ConditionSNMP_AGENT1.3.6.1.4.1.232.3.2.2.1.1.6.{#SNMPINDEX}cpqDaCntlrCondition[{#SNMPVALUE}]60sThe condition of the device. This value represents the overall condition of this controller, and any associated logical drives, physical drives, and array accelerators.Storage HealthHP Insight System Status{last()}=1RECOVERY_EXPRESSION{last()}=2RAID Controller [{#SNMPVALUE}] need check (Other)WARNINGYES{last()}>2RECOVERY_EXPRESSION{last()}=2RAID Controller [{#SNMPVALUE}] not OKHIGHYESLogical Drive discoverySNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.232.3.2.3.1.1.2]cpqDaLogDrvIndex-[{#SNMPVALUE}]1hDrive Array Logical Drive Index. This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each controller index value, the logical drive index starts at 1 and increments for each logical drive.Logical Drive $1 conditionSNMP_AGENT1.3.6.1.4.1.232.3.2.3.1.1.11.{#SNMPINDEX}cpqDaLogDrvCondition[{#SNMPVALUE}]60sThe Logical Drive condition. This value represents the overall condition of this logical drive and any associated physical drives.Storage HealthHP Insight System Status{last()}=1Check Logical Drive [{#SNMPVALUE}] on {HOST.NAME} status (Other)WARNING{last()}>2Logical Drive [{#SNMPVALUE}] on {HOST.NAME} FailureHIGHPhysical Drive discoverySNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.232.3.2.5.1.1.2]cpqDaPhyDrvIndex-[{#SNMPVALUE}]1hDrive Array Physical Drive Index. This index is used for selecting the physical drive table entry. This number, along with the cpqDaPhyDrvCntlrIndex uniquely identify a specific physical drive.Physical Drive $1 ConditionSNMP_AGENT.1.3.6.1.4.1.232.3.2.5.1.1.37.{#SNMPINDEX}cpqDaPhyDrvCondition[{#SNMPVALUE}]60sThe condition of the device. This value represents the overall condition of this physical drive.Storage HealthHP Physical Drive Status{last()}=1Physical drive [{#SNMPVALUE}] need check (Other)WARNING{last()}<>2Physical drive [{#SNMPVALUE}] not OKHIGHDrive Array Spare Controller discoverySNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.232.3.2.4.1.1.1]cpqDaSpareCntlrIndex-[{#SNMPVALUE}]1hDrive Array Spare Controller Index. This index maps the spare drive back to the controller to which it is attached. The value of this index is the same as the one used under the controller group.Drive Array Spare Controller $1 conditionSNMP_AGENT1.3.6.1.4.1.232.3.2.4.1.1.6.{#SNMPINDEX}cpqDaSpareCondition[{#SNMPVALUE}]60sThe Spare Drive condition. This value represents the overall condition of this spare drive and any associated physical drives.Storage HealthHP Insight System Status{last()}>2Drive Array Spare Controller [{#SNMPVALUE}] on {HOST.NAME} FailureHIGH{last()}=1Drive Array Spare Controller [{#SNMPVALUE}] on {HOST.NAME} status (Other)WARNINGFan discoverySNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.232.6.2.6.7.1.2]cpqHeFltTolFanIndex[{#SNMPVALUE}]1hA number that uniquely specifies this fan description.FAN $1 conditionSNMP_AGENT1.3.6.1.4.1.232.6.2.6.7.1.9.{#SNMPINDEX}cpqHeFltTolFanCondition[{#SNMPVALUE}]60sThe condition of the fan. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) The fan is operating properly. degraded(3) A redundant fan is not operating properly. failed(4) A non-redundant fan is not operating properly.FAN HealthHP Insight System Status{last()}<>2Fan $1 condition on {HOST.NAME} not in OK statusHIGHFAN $1 locationSNMP_AGENT1.3.6.1.4.1.232.6.2.6.7.1.3.{#SNMPINDEX}cpqHeFltTolFanLocale[{#SNMPVALUE}]1hThis specifies the location of the fan in the system.FAN HealthHP locationFAN $1 presentSNMP_AGENT1.3.6.1.4.1.232.6.2.6.7.1.4.{#SNMPINDEX}cpqHeFltTolFanPresent[{#SNMPVALUE}]1hFAN HealthHP PresenceFAN $1 redundantSNMP_AGENT1.3.6.1.4.1.232.6.2.6.7.1.7.{#SNMPINDEX}cpqHeFltTolFanRedundant[{#SNMPVALUE}]1hThis specifies if the fan is in a redundant configuration.FAN HealthHP Redundancy{last()}<>3Fan $1 on {HOST.NAME} not redundantAVERAGEPower Supply BaySNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.232.6.2.9.3.1.2]cpqHeFltTolPowerSupplyBay-[{#SNMPVALUE}]1hThe bay number to index within this chassis.Power Supply $1 Max WattsSNMP_AGENT1.3.6.1.4.1.232.6.2.9.3.1.8.{#SNMPINDEX}cpqHeFltTolPowerSupplyCapacityMaximum[{#SNMPVALUE}]60sWThe maximum capacity of the power supply in watts.Power HealthPower Supply $1 Capacity UsageCALCULATEDcpqHeFltTolPowerSupplyCapacityUsedPerc[{#SNMPVALUE}]60sFLOAT%last(cpqHeFltTolPowerSupplyCapacityUsed[{#SNMPVALUE}])/(last(cpqHeFltTolPowerSupplyCapacityMaximum[{#SNMPVALUE}])/100)Power Health{avg(15m)}>75RECOVERY_EXPRESSION{avg(15m)}<75Power Supply [{#SNMPVALUE}] High UsageWARNINGYESPower Supply $1 Used WattsSNMP_AGENT1.3.6.1.4.1.232.6.2.9.3.1.7.{#SNMPINDEX}cpqHeFltTolPowerSupplyCapacityUsed[{#SNMPVALUE}]60sWThe currently used capacity of the power supply in watts.Power HealthPower Supply $1 ConditionSNMP_AGENT1.3.6.1.4.1.232.6.2.9.3.1.4.{#SNMPINDEX}cpqHeFltTolPowerSupplyCondition[{#SNMPVALUE}]60sThe condition of the power supply. This value will be one of the following: other(1) The status could not be determined or not present. ok(2) The power supply is operating normally. degraded(3) A temperature sensor, fan or other power supply component is outside of normal operating range. failed(4) A power supply component detects a condition that could permanently damage the system.Power HealthHP Insight System Status{last()}>2RECOVERY_EXPRESSION{last()}=2Power Supply [{#SNMPVALUE}] is not OKHIGHYESPower Supply $1 VoltageSNMP_AGENT1.3.6.1.4.1.232.6.2.9.3.1.6.{#SNMPINDEX}cpqHeFltTolPowerSupplyMainVoltage[{#SNMPVALUE}]60sVThe input main voltage of the power supply in volts.Power Health{last()}>240RECOVERY_EXPRESSION{last()}>220 and {last()}<240Power Supply [{#SNMPVALUE}] high input voltageWARNINGYES{last()}<210RECOVERY_EXPRESSION{last()}>210 and {last()}<240Power Supply [{#SNMPVALUE}] low input voltageWARNINGYESPower Supply $1 PresenceSNMP_AGENT1.3.6.1.4.1.232.6.2.9.3.1.3.{#SNMPINDEX}cpqHeFltTolPowerSupplyPresent[{#SNMPVALUE}]60sIndicates whether the power supply is present in the chassis.Power HealthHP PresencePower Supply $1 RedundancySNMP_AGENT1.3.6.1.4.1.232.6.2.9.3.1.9.{#SNMPINDEX}cpqHeFltTolPowerSupplyRedundant[{#SNMPVALUE}]60sThe redundancy state of the power supply. This value will be one of the following: other(1) The redundancy state could not be determined. notRedundant(2) The power supply is not operating in a redundant state. redundant(3) The power supply is operating in a redundant state.Power HealthHP Redundancy{last()}=2RECOVERY_EXPRESSION{last()}=3Power Supply [{#SNMPVALUE}] has no redundancy.HIGHYESPower Supply $1 StatusSNMP_AGENT1.3.6.1.4.1.232.6.2.9.3.1.5.{#SNMPINDEX}cpqHeFltTolPowerSupplyStatus[{#SNMPVALUE}]60sThe status of the power supply.Power HealthHP Power Supply Status{last()}<>1Power Supply Status [{#SNMPVALUE}] is not OKHIGHYESPower Supply {#SNMPVALUE} input voltage200260FIXEDFIXEDGRADIENT_LINECC0000- SNMP HP Server HealthcpqHeFltTolPowerSupplyMainVoltage[{#SNMPVALUE}]
Power Supply {#SNMPVALUE} Usage LevelFIXEDFIXEDGRADIENT_LINE00BB00- SNMP HP Server HealthcpqHeFltTolPowerSupplyCapacityUsedPerc[{#SNMPVALUE}]
Temp discoverySNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.4.1.232.6.2.6.8.1.2]cpqHeTemperatureIndex[{#SNMPVALUE}]1hA number that uniquely specifies this temperature sensor description.Temperature $1 celsiusSNMP_AGENT1.3.6.1.4.1.232.6.2.6.8.1.4.{#SNMPINDEX}cpqHeTemperatureCelsius[{#SNMPVALUE}]60sCThis is the current temperature sensor reading in degrees celsius. If this value cannot be determined by software, then a value of -99 will be returned.Temp HealthHP locationTemperature $1 conditionSNMP_AGENT1.3.6.1.4.1.232.6.2.6.8.1.6.{#SNMPINDEX}cpqHeTemperatureCondition[{#SNMPVALUE}]60sThe Temperature sensor condition. This value will be one of the following: other(1) Temperature could not be determined. ok(2) The temperature sensor is within normal operating range. degraded(3) The temperature sensor is outside of normal operating range. failed(4) The temperature sensor detects a condition that could permanently damage the system. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent. If the cpqHeThermalDegradedAction is set to shutdown(3) the system will be shutdown if the degraded(3) condition occurs.Temp HealthHP Insight System Status{last()}<>2Temperature $1 condition on {HOST.NAME} not in OK statusHIGHTemperature $1 locationSNMP_AGENT1.3.6.1.4.1.232.6.2.6.8.1.3.{#SNMPINDEX}cpqHeTemperatureLocale[{#SNMPVALUE}]1hThis specifies the location of the temperature sensor present in the system.Temp HealthHP locationHP ASR Status1Other2NotAvailiable3Disabled4EnabledHP Insight System Status1Other2OK3Degraded4FailedHP location1Other2Unknown3System4SystemBoard5IOBoard6CPU7Memory8Storage9RemovableMedia10PowerSupply11Ambient12Chassis13BridgeCard14ManagementBoard15Backplane16NetworkSlot17BladeSlot18VirtualHP Memory Protection Types1Other2None3Online Spare4Mirrored5Advanced ECC6Mirrored Single Board7Mirrored Dual Board8XOR9LockStepHP Physical Drive Status1Other2OK3Failed4Predictive Failure5Erasing6Erase Done7Erase PendingHP Power Supply Status1NoError2GeneralFailure3BistFailure4FanFailure5TempFailure6InterlockOpen7EpromFailed8VrefFailed9DacFailed10RamTestFailed11VoltageChannelFailde12OrringDiodeFailed13BrownOut14GiveUpOnStartup15NVRamInvalid16CalibrationTableInvalidHP Presence1Other2Absent3PresentHP Redundancy1Other2Not Redundant3Redundant