5.02021-11-21T21:32:38ZNo-breaksTemplatesEmerson_LiebertEmerson_Liebert## Overview
Athough I've seen some Emerson templates, none of them worked with my UPS GXT3-XXXXX. So I created this template with lld for the UPS outputs and some itens that I usually need (like % Load).
It's basic but can help someone in need some day.
Battery Charge Status, Battery Charge Remaining %, Battery Voltage, System Info (Contact, Uptime, Serial, Firmware and etc), Output Load and Input Voltage
ps: There's a macro for SNMP community, so you might want to change it.
Tested in Zabbix 3.4.3
Cheers!
##################
Embora eu já tenha visto alguns templates de No-Breaks Emerson na internet, nenhum deles funcionou com meu equipamento (modelo GXT3-XXXX). Então eu criei este template com lld para descobrir as saidas e criar as % de carga de cada saída.
É um template básico mas pode ajudar alguém algum dia.
Carga de Bateria, Status da Bateris, Carga Restante (em %), Carga Restante (em min), Voltagem da Bateria, Informações do Equipamento (Nome, Tempo sem desligar, número de série, versão do firmware e etc), Carga de Saida e Tensão de Entrada.
Obs: Há uma macro criada para a community do SNMP, então talvez você queira alterar.
Sucesso!
Luiz Fernando Gondin Santos
## Author
Luiz Fernando Gondin
No-breaksTemplatesBatteryGeneralInput/Output- System Firmware VersionSNMP_AGENT.1.3.6.1.4.1.476.1.42.2.1.3.0lgpAgentIdenFirmwareVersion0TEXTGeneral
- System ManufacturerSNMP_AGENT.1.3.6.1.4.1.476.1.42.2.1.1.0lgpAgentIdenManufacturer0TEXTGeneral
- System Network Card ModelSNMP_AGENT.1.3.6.1.4.1.476.1.42.2.1.2.0lgpAgentIdenModel0TEXTGeneral
- System Serial NumberSNMP_AGENT.1.3.6.1.4.1.476.1.42.2.1.4.0lgpAgentIdenSerialNumber0CHARGeneral
- System ContactSNMP_AGENT.1.3.6.1.2.1.1.4.0sysContact0TEXTGeneral
- System DescriptionSNMP_AGENT.1.3.6.1.2.1.1.1.0sysDescr0TEXTGeneral
- System LocationSNMP_AGENT.1.3.6.1.2.1.1.6.0sysLocation0TEXTGeneral
- System NameSNMP_AGENT.1.3.6.1.2.1.1.5.0sysName0TEXTGeneral
- System UptimeSNMP_AGENT.1.3.6.1.2.1.1.3.0sysUpTime30duptimeGeneralMULTIPLIER0.01
- Ups Auto RestartSNMP_AGENT.1.3.6.1.2.1.33.1.8.5.0upsAutoRestart30sGeneralEmerson AutoRestart{last()}=2Auto Restart is disabled on {HOST.NAME}INFO
- Battery StatusSNMP_AGENT.1.3.6.1.2.1.33.1.2.1.0upsBatteryStatus30sFLOATBatteryEmerson Battery Status{last()}<>2UPS Battery is not optimalAVERAGE
- Battery VoltageSNMP_AGENT.1.3.6.1.2.1.33.1.2.5.0upsBatteryVoltage30sVBattery
- Ups Input VoltageSNMP_AGENT.1.3.6.1.2.1.33.1.9.1.0upsConfigInputVoltage30sVInput/Output
- Ups Output VoltageSNMP_AGENT.1.3.6.1.2.1.33.1.9.3.0upsConfigOutputVoltage30sVInput/Output
- Battery Charge RemainingSNMP_AGENT.1.3.6.1.2.1.33.1.2.4.0upsEstimatedChargeRemaining30dFLOAT%Battery{last()}<20{HOST.NAME} Battery has less than 20% chargeHIGH
- Battery Time RemainingSNMP_AGENT.1.3.6.1.2.1.33.1.2.3.0upsEstimatedMinutesRemaining30dFLOATmBattery{last()}<10{HOST.NAME} Battery has las than 10 Minutes RemainingHIGH
- System ModelSNMP_AGENT.1.3.6.1.2.1.33.1.1.2.0upsIdenModel0TEXTGeneral
- Output SourceSNMP_AGENT.1.3.6.1.2.1.33.1.4.1.0upsOutputSource30sInput/OutputEmerson Output Source{last()}<>3UPS Output is not normalAVERAGEWarn if voltage output is not optimal (3 -Normal)
UPS Load OutputSNMP_AGENTdiscovery[{#SNMPVALUE},.1.3.6.1.2.1.33.1.4.4.1.5]upsOutputPercentLoad30sOutput Load DiscoveryOutput Load at Line {#SNMPINDEX}SNMP_AGENT1.3.6.1.2.1.33.1.4.4.1.5.{#SNMPINDEX}ups.Output.Percentload.[{#SNMPINDEX}]30s%Discovered Output Load PercentualInput/Output{$SNMP_COMMUNITY}publicEmerson AutoRestart1On2OffEmerson Battery Status1Unknown2Normal3Low4DepletedEmerson Output Source2None3Normal4Bypass5Battery6Booster7Reducer