zabbix_export: version: '6.0' date: '2021-11-25T12:34:30Z' groups: - uuid: 57b7ae836ca64446ba2c296389c009b7 name: Templates/Modules - uuid: 0e60ac85bc3941e2a1d66a048ff164da name: UPS templates: - uuid: a5faba94492b4cc0a695ddfeaedbb392 template: Liebert_GXT4_UPS name: Liebert_GXT4_UPS templates: - name: 'Template Module ICMP Ping' groups: - name: UPS items: - uuid: d747d6debfa645ebb96dcef5180598a2 name: 'Firmware version' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.1.3.0 key: lgpAgentDeviceFirmwareVersion delay: 24h trends: '0' value_type: CHAR tags: - tag: Application value: 'System Information' - uuid: 002ca35557b149f7a8e70f7ba8312bf3 name: 'Manufacture date' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.476.1.42.2.4.2.1.8.1 key: lgpAgentDeviceManufactureDate delay: 24h trends: '0' value_type: CHAR tags: - tag: Application value: 'System Information' - uuid: 47c9cc23d6d04a9bb172594f3ee1383f name: Model type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.1.2.0 key: lgpAgentDeviceModel delay: 24h trends: '0' value_type: CHAR tags: - tag: Application value: 'System Information' - uuid: 6c5f8ecbdea64b1d831fde84ec2421d8 name: 'Number of current alarm' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.6.1.0 key: upsAlarmsPresent units: Alarm description: | The present number of active alarm conditions A list of alarm table entries. The table contains zero, one, or many rows at any moment, depending upon the number of alarm conditions in effect. The table is initially empty at agent startup. The agent creates a row in the table each time a condition is detected and deletes that row when that condition no longer pertains. The agent creates the first row with upsAlarmId equal to 1, and increments the value of upsAlarmId each time a new row is created, wrapping to the first free value greater than or equal to 1 when the maximum value of upsAlarmId would otherwise be exceeded. Consequently, after multiple operations, the table may become sparse, e.g., containing entries for rows 95, 100, 101, and 203 and the entries should not be assumed to be in chronological order because upsAlarmId might have wrapped. Alarms are named by an AutonomousType (OBJECT IDENTIFIER), upsAlarmDescr, to allow a single table to reflect well known alarms plus alarms defined by a particular implementation, i.e., as documented in the private enterprise MIB definition for the device. No two rows will have the same value of upsAlarmDescr, since alarms define conditions. In order to meet this requirement, care should be taken in the definition of alarm conditions to insure that a system cannot enter the same condition multiple times simultaneously. The number of rows in the table at any given time is reflected by the value of upsAlarmsPresent. tags: - tag: Application value: 'UPS Healthy' triggers: - uuid: d0f1b5b60e524464b2e5f36e3cee3baa expression: 'last(/Liebert_GXT4_UPS/upsAlarmsPresent,#1:now-0)>=1' name: 'An alarm has been detected, please check' url: 'http://pth-rack03-ups.corescan.net.au/default.html?devId=4' priority: WARNING description: 'Login to the ups Web UI and check for any alarms there.' - uuid: 55f30f4e749044db89bb1c3969aec798 name: 'Battery status' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.2.1.0 key: upsBatteryStatus description: | The indication of the capacity remaining in the UPS system's batteries. A value of batteryNormal indicates that the remaining run-time is greater than upsConfigLowBattTime. A value of batteryLow indicates that the remaining battery run-time is less than or equal to upsConfigLowBattTime. A value of batteryDepleted indicates that the UPS will be unable to sustain the present load when and if the utility power is lost (including the possibility that the utility power is currently absent and the UPS is unable to sustain the output). INTEGER {unknown(1), batteryNormal(2), batteryLow(3), batteryDepleted(4) } valuemap: name: apcBatteryStatus tags: - tag: Application value: 'Battery information' triggers: - uuid: c3ca0161535f44cd822ccbdf24564237 expression: 'last(/Liebert_GXT4_UPS/upsBatteryStatus,#1:now-0)=4' name: 'Battery Depleted' priority: AVERAGE description: | {unknown(1), batteryNormal(2), batteryLow(3), batteryDepleted(4) } - uuid: 2a13d196f6734a72ac3191225d20af03 expression: 'last(/Liebert_GXT4_UPS/upsBatteryStatus,#1:now-0)=3' name: 'Battery Low' priority: WARNING description: | {unknown(1), batteryNormal(2), batteryLow(3), batteryDepleted(4) } - uuid: 6ff15acc61d14185aa238653e964e9b7 name: 'Battery voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.2.5.0 key: upsBatteryVoltage units: Volts description: 'The magnitude of the present battery voltage.' tags: - tag: Application value: 'Battery information' - uuid: 8f3c88e1725541d0bf1d7a8da97ce50e name: 'Charge remaining' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.2.4.0 key: upsEstimatedChargeRemaining units: '%' description: | An estimate of the battery charge remaining expressed as a percent of full charge tags: - tag: Application value: 'Battery information' - uuid: 88ce558fcbb143d1a4db69522cbd2988 name: 'Estimated time remaining on battery' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.2.3.0 key: upsEstimatedMinutesRemaining units: uptime description: | An estimate of the time to battery charge depletion under the present load conditions if the utility power is off and remains off, or if it were to be lost and remain off. tags: - tag: Application value: 'Battery information' triggers: - uuid: 75a0896131014cb1b2a91fda0d37d665 expression: 'last(/Liebert_GXT4_UPS/upsEstimatedMinutesRemaining,#1:now-0)=5' name: 'Battery will turn in 5 min' priority: AVERAGE - uuid: 42825eff164f4b77b5707d79ae71e78d expression: 'last(/Liebert_GXT4_UPS/upsEstimatedMinutesRemaining,#1:now-0)=15' name: 'Battery will turn in 15 min' priority: WARNING - uuid: 2fa1435903f441478939c7b75aee1989 name: 'Input current' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.3.3.1.4.1 key: upsInputCurrent units: Volts description: 'The magnitude of the present input current.' tags: - tag: Application value: 'Battery Input' - uuid: d9365c73a3ea4c8c97ea02e55e32bdcf name: 'Input Frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.3.3.1.2.1 key: upsInputFrequency description: 'The present input frequency.' tags: - tag: Application value: 'Battery Input' - uuid: 86ee5cce6344460ab769eca24ed34d61 name: 'Input voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.3.3.1.3.1 key: upsInputVoltage units: Volts description: 'The magnitude of the present input voltage' tags: - tag: Application value: 'Battery Input' - uuid: 4f987d0de5dc46df9fc823d2a12098b2 name: 'Output current' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.4.4.1.3.1 key: upsOutputCurrent units: Volts description: 'The present output current' tags: - tag: Application value: 'Battery Output' - uuid: adb6a11beb9b4e279281d2640545a281 name: 'Output frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.4.2.0 key: upsOutputFrequency description: 'The present output frequency.' tags: - tag: Application value: 'Battery Output' - uuid: e94179016c694347bd581d4c299cd26d name: 'UPS power capacity presently being used' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.4.4.1.5.1 key: upsOutputPercentLoad units: '% of VA' description: | The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA. tags: - tag: Application value: 'Battery Output' - uuid: e0a21f6e489f49abb99df175a91a2f57 name: 'Output power' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.4.4.1.4.1 key: upsOutputPower units: Volts description: 'The present output true power' tags: - tag: Application value: 'Battery Output' - uuid: af2269c7ea834651a21540687580d7ce name: 'Output source' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.4.1.0 key: upsOutputSource description: | The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker valuemap: name: 'Tripplite Output Source' tags: - tag: Application value: 'Battery Output' - uuid: d29ff640beeb4e9dbe45839be7988c63 name: 'Output voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.4.4.1.2.1 key: upsOutputVoltage units: Volts description: 'The present output voltage' tags: - tag: Application value: 'Battery Output' - uuid: 3e4b48b8a43e4c7ea67f2a23ce7d1093 name: 'Time on battery' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.2.2.0 key: upsSecondsOnBattery units: uptime description: | If the unit is on battery power, the elapsed time since the UPS last switched to battery power, or the time since the network management subsystem was last restarted, whichever is less. Zero shall be returned if the unit is not on battery power. valuemap: name: apcBatteryStatus - uuid: 9d47bd65696745a7987e881cb2909584 name: 'UPS test results' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.7.4.0 key: upsTestResultsDetail trends: '0' value_type: CHAR description: | Additional information about upsTestResultsSummary. If no additional information available, a zero length string is returned tags: - tag: Application value: 'UPS Healthy' - uuid: 32ac5e0931bc42a4bef00bb3256bdd71 name: 'UPS last test performed' type: SNMP_AGENT snmp_oid: .1.3.6.1.2.1.33.1.7.3.0 key: upsTestResultsSummary description: | The results of the current or last UPS diagnostics test performed. The values for donePass(1), doneWarning(2), and doneError(3) indicate that the test completed either successfully, with a warning, or with an error, respectively. The value aborted(4) is returned for tests which are aborted by setting the value of upsTestId to upsTestAbortTestInProgress. Tests which have not yet concluded are indicated by inProgress(5). The value noTestsInitiated(6) indicates that no previous test results are available, such as is the case when no tests have been run since the last reinitialization of the network management subsystem and the system has no provision for non- volatile storage of test results INTEGER {donePass(1), doneWarning(2), doneError(3), aborted(4), inProgress(5), noTestsInitiated(6) } valuemap: name: UPS_Test_Summary tags: - tag: Application value: 'UPS Healthy' triggers: - uuid: 8c7a35e6c0c8441eadf1e65bd261af33 expression: 'last(/Liebert_GXT4_UPS/upsTestResultsSummary,#1:now-0)=2' name: 'Last test performed reported a warning, please check' url: 'http://pth-rack03-ups.corescan.net.au/default.html?devId=4' priority: WARNING description: | INTEGER {donePass(1), doneWarning(2), doneError(3), aborted(4), inProgress(5), noTestsInitiated(6) } - uuid: fc3f29b3f11045b792885e14ecec77c3 expression: 'last(/Liebert_GXT4_UPS/upsTestResultsSummary,#1:now-0)=3' name: 'Last test performed reported with error, please check' url: 'http://pth-rack03-ups.corescan.net.au/default.html?devId=4' priority: AVERAGE description: | INTEGER {donePass(1), doneWarning(2), doneError(3), aborted(4), inProgress(5), noTestsInitiated(6) } valuemaps: - uuid: a10a9916f20f4405a99813b0ca7f3c25 name: apcBatteryStatus mappings: - value: '1' newvalue: unknown - value: '2' newvalue: batteryNormal - value: '3' newvalue: batteryLow - value: '4' newvalue: batteryDepleted - uuid: 08fa22ee66ef4fbd94586d2c957ad2c7 name: 'Tripplite Output Source' mappings: - value: '1' newvalue: other - value: '2' newvalue: none - value: '3' newvalue: normal - value: '4' newvalue: bypass - value: '5' newvalue: battery - value: '6' newvalue: booster - value: '7' newvalue: reducer - uuid: 5788e94a374f4991abc3e9613cabba40 name: UPS_Test_Summary mappings: - value: '1' newvalue: donePass - value: '2' newvalue: doneWarning - value: '3' newvalue: doneError - value: '4' newvalue: aborted - value: '5' newvalue: inProgress - value: '6' newvalue: noTestsInitiated - uuid: 37e5eb5606bc4abba66c8b20381a1e8a template: 'Template Module ICMP Ping' name: 'Template Module ICMP Ping' description: 'Template Module ICMP Ping version: 0.12' groups: - name: Templates/Modules items: - uuid: db5a94f6cea14deba957202b2f014469 name: 'ICMP ping' type: SIMPLE key: icmpping delay: '60' history: 1w valuemap: name: 'Service state' tags: - tag: Application value: Status triggers: - uuid: b030876299434f3ba43e11c584104a81 expression: 'max(/Template Module ICMP Ping/icmpping,#3)=0' name: 'Unavailable by ICMP ping' priority: HIGH description: | Last value: {ITEM.LASTVALUE1}. Last three attempts returned timeout. Please check device connectivity. - uuid: 04b21adaf422473a88df2c52786474ed name: 'ICMP loss' type: SIMPLE key: icmppingloss delay: '60' history: 1w value_type: FLOAT units: '%' tags: - tag: Application value: Status triggers: - uuid: 42c4b0310aaf4b9c8cb502542b7dea90 expression: 'min(/Template Module ICMP Ping/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Template Module ICMP Ping/icmppingloss,5m)<100' name: 'High ICMP ping loss' priority: WARNING dependencies: - name: 'Unavailable by ICMP ping' expression: 'max(/Template Module ICMP Ping/icmpping,#3)=0' - uuid: a79e33e5fd264725b934f603fa071555 name: 'ICMP response time' type: SIMPLE key: icmppingsec delay: '60' history: 1w value_type: FLOAT units: s tags: - tag: Application value: Status triggers: - uuid: 32b4d8f3eba34bd380803410111d4b7f expression: 'avg(/Template Module ICMP Ping/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}' name: 'High ICMP ping response time' priority: WARNING dependencies: - name: 'High ICMP ping loss' expression: 'min(/Template Module ICMP Ping/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Template Module ICMP Ping/icmppingloss,5m)<100' - name: 'Unavailable by ICMP ping' expression: 'max(/Template Module ICMP Ping/icmpping,#3)=0' macros: - macro: '{$ICMP_LOSS_WARN}' value: '20' - macro: '{$ICMP_RESPONSE_TIME_WARN}' value: '0.15' valuemaps: - uuid: bdb5d65d925542eaa61c302dc40fbfe8 name: 'Service state' mappings: - value: '0' newvalue: Down - value: '1' newvalue: Up