zabbix_export: version: '5.4' date: '2021-11-25T12:35:17Z' groups: - uuid: 57b7ae836ca64446ba2c296389c009b7 name: Templates/Modules - uuid: 153256bb78be4c2ea2a934d5731d41ae name: Templates/UPS templates: - uuid: 73c5e487af28484f85c56bdaad17d36e template: PitON name: PitON templates: - name: 'Template Module ICMP Ping' groups: - name: Templates/UPS items: - uuid: 18cb8a373f1649f484997399e3debee8 name: 'Number of manager to send traps' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.2.1.1.0 key: XPPC-MIB.mconfigTrapsReceiversNum delay: 6h description: 'The number of managers to send traps to.' tags: - tag: Application value: Trap - uuid: 08a57c340e1f4c6a8e50f321f5f9decf name: 'Last replaced date' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.1.3.0 key: XPPC-MIB.upsBaseBatteryLastReplaceDate delay: 6h trends: '0' value_type: TEXT description: 'The date when the UPS system''s batteries were last replaced in mm/dd/yy format. For UPS models, this value is originally set in the factory. When the UPS batteries are replaced, this value should be reset by the administrator.' tags: - tag: Application value: Battery - uuid: d8dbf5afc738457e9cc02a51913bac40 name: 'Battery status' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.1.1.0 key: XPPC-MIB.upsBaseBatteryStatus delay: 5m history: 30d description: 'The status of the UPS batteries. A batteryLow(3) value indicates the UPS will be unable to sustain the current load, and its services will be lost if power is not restored. The amount of run time in reserve at the time of low battery can be configured by the upsSmartConfigLowBatteryRunTime.' valuemap: name: 'XPPC-MIB::upsBaseBatteryStatus' tags: - tag: Application value: Battery - uuid: cab9f9300f244902b3a6c9c7ba665bbd name: 'Battery time on' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.1.2.0 key: XPPC-MIB.upsBaseBatteryTimeOnBattery delay: 5m history: 30d units: s description: 'The elapsed time in seconds since the UPS has switched to battery power.' tags: - tag: Application value: Battery - uuid: b23426789ea74a5c8fc7d477268f6e3e name: 'Plugged devices' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.1.1.0 key: XPPC-MIB.upsBaseConfigNumDevices delay: 6h description: 'The number of devices that are plugged into the UPS.' tags: - tag: Application value: Config - uuid: 9bed63a4f95e47858b344e3c8ac35e98 name: 'Battery conserve control' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.6.1.1.0 key: XPPC-MIB.upsBaseControlConserveBattery delay: 5m description: | Setting this variable to turnUpsOffToConserveBattery(2) causes a UPS on battery to be put into 'sleep' mode immediately. The (10) means suspending time(10 minutes) before turn off UPS. UPS will turn back on when utility power is restored. Attempting to turn off a UPS that is not on battery will result in a badValue error. Setting this value to noTurnOffUps(1) has no effect. The value noTurnOffUps(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsBaseControlConserveBattery' tags: - tag: Application value: Battery - uuid: c93a336c5e6a4f1da4a0110fcab88b39 name: 'Model name' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.1.1.1.0 key: XPPC-MIB.upsBaseIdentModel delay: 6h history: 30d trends: '0' value_type: TEXT description: 'The UPS model name (e.g. ''Intelligent 8000E 900VA'').' tags: - tag: Application value: General - uuid: 57bef77126144157a7cb6cfdf199217a name: 'UPS ID' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.1.1.2.0 key: XPPC-MIB.upsBaseIdentUpsName delay: 6h history: 30d trends: '0' value_type: TEXT description: 'An 8 byte ID string identifying the UPS. This object can be set by the administrator' tags: - tag: Application value: General - uuid: 9293a25fb73f40129d9c25c0f7cd68fc name: 'Input phase' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.3.1.1.0 key: XPPC-MIB.upsBaseInputPhase delay: 5m description: 'The current AC input phase.' tags: - tag: Application value: Input - uuid: 68ff81a80de949bd83ce5a977b2fd745 name: 'Output phase' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.4.1.2.0 key: XPPC-MIB.upsBaseOutputPhase delay: 5m description: 'The current output phase.' tags: - tag: Application value: Output - uuid: 72930c0ba03a4c0aab6c4f7c5ec5cfda name: 'Output status' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.4.1.1.0 key: XPPC-MIB.upsBaseOutputStatus delay: 5m description: 'The current state of the UPS. If the UPS is unable to determine the state of the UPS this variable is set to unknown(1)' valuemap: name: 'XPPC-MIB::upsBaseOutputStatus' tags: - tag: Application value: Output - uuid: fcbf2528d9c3432b90bfacc9e80dc273 name: 'Eenvironment humidity' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.2.0 key: XPPC-MIB.upsEnvHumidity delay: 5m units: '%' description: 'The environment humidity.' tags: - tag: Application value: Environment - uuid: cb5a94c6a81e4712bb7a3eb759288092 name: 'Environment over humidity' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.2.3.0 key: XPPC-MIB.upsEnvOverHumidity delay: 5m units: '%' description: 'Alarm dupsAlarmOverHumidity on when the environment humidity over the value.' tags: - tag: Application value: Environment - uuid: 53055ee0e83b4cb09736af8e57bf2a17 name: 'Environment over temperature' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.2.1.0 key: XPPC-MIB.upsEnvOverTemperature delay: 5m units: °C description: 'Alarm dupsAlarmOverTemperature on when the environment temperature over the value.' tags: - tag: Application value: Environment - uuid: 07cb53b5ad544c08a6d39f8fb54e3584 name: 'Environment security 1' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.5.0 key: XPPC-MIB.upsEnvSecurity1 delay: 5m description: 'Security status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: 52d1b86bd2cd437cb856d240697f5eb3 name: 'Environment security 2' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.6.0 key: XPPC-MIB.upsEnvSecurity2 delay: 5m description: 'Security status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: 70743200a7bb470ea8fa65cc669510bd name: 'Environment security 3' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.7.0 key: XPPC-MIB.upsEnvSecurity3 delay: 5m description: 'Security status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: 09de64dd611543f8a552ffd65c70f88a name: 'Environment security 4' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.8.0 key: XPPC-MIB.upsEnvSecurity4 delay: 5m description: 'Security status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: 1bcb8173d83443d4bafcd54283bf3a80 name: 'Environment security 5' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.9.0 key: XPPC-MIB.upsEnvSecurity5 delay: 5m description: 'Security status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: 832974943f3a406682303b04fb42eff1 name: 'Environment security 6' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.10.0 key: XPPC-MIB.upsEnvSecurity6 delay: 5m description: 'Security status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: da24c293d49541fc9471b89c1b790011 name: 'Environment security 7' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.11.0 key: XPPC-MIB.upsEnvSecurity7 delay: 5m description: 'Security status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: 4dd902043fae4c748fa29fee17271b01 name: 'Environment smoke' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.4.0 key: XPPC-MIB.upsEnvSmoke delay: 5m description: 'Smoke status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: 4f68dc5680214b9aac4526b3c90dcbd2 name: 'Environment temperature' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.1.0 key: XPPC-MIB.upsEnvTemperature delay: 5m units: °C description: 'The ambient environment temperature.' tags: - tag: Application value: Environment - uuid: 35d551475bde4ef689e2c20aeec2da8b name: 'Environment under humidity' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.2.4.0 key: XPPC-MIB.upsEnvUnderHumidity delay: 5m units: '%' description: 'Alarm dupsAlarmUnderHumidity on when the environment humidity below the value' tags: - tag: Application value: Environment - uuid: 45123af541fe4d57b45bd69fdfc26225 name: 'Environment under temperature' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.2.2.0 key: XPPC-MIB.upsEnvUnderTemperature delay: 5m units: °C description: 'Alarm dupsAlarmUnderTemperature on when the environment temperature below the value.' tags: - tag: Application value: Environment - uuid: 559f647b8e004d0f91936dda6ce4758d name: 'Environment water' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.9.1.3.0 key: XPPC-MIB.upsEnvWater delay: 5m description: 'Water status' valuemap: name: 'XPPC-MIB::upsNormal/Abnormal' tags: - tag: Application value: Environment - uuid: f5d0020dca3f487c98835f95d0bc74d6 name: 'Control ups off' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.6.2.1.0 key: XPPC-MIB.upsSmaControlUpsOff delay: 5m description: | Setting this variable to turnUpsOff(2) causes the UPS to shut off. When in this state, the UPS will not provide output power regardless of the input line state. The on/off switch on the UPS must be toggled for the UPS to return to operation. Setting this value to noTurnUpsOff(1) has no effect. The value noTurnUpsOff(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsSmartControlUpsOff' tags: - tag: Application value: Control - uuid: 8462eef7fd0c42c2bb36ce1a96a0e4c5 name: 'Battery capacity' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.2.1.0 key: XPPC-MIB.upsSmartBatteryCapacity delay: 5m units: '%' description: 'The remaining battery capacity expressed in percent of full capacity.' tags: - tag: Application value: Battery - uuid: 477e270641ef41a1b49e276e82cc50e3 name: 'Battery current of maximum current' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.2.7.0 key: XPPC-MIB.upsSmartBatteryCurrent delay: 5m units: '%' description: 'The current battery current expressed in percent of maximum current.' tags: - tag: Application value: Battery - uuid: 955e47b2d4ff4c39994ef3e9abb64716 name: 'Battery full charge voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.2.6.0 key: XPPC-MIB.upsSmartBatteryFullChargeVoltage delay: 5m units: V description: 'The fully charged battery voltage of the battery system used in the UPS, expressed in tenths of a volt.' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Battery - uuid: f402bd22f7b74ab4b6abc95b0a617c29 name: 'Battery replace indicator' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.2.5.0 key: XPPC-MIB.upsSmartBatteryReplaceIndicator delay: 5m description: 'Indicates whether the UPS batteries need replacing.' valuemap: name: 'XPPC-MIB::upsSmartBatteryReplaceIndicator' tags: - tag: Application value: Battery - uuid: 1d49c81e3e2a400d9ff9e843d38ed7b1 name: 'Battery time remaining' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.2.4.0 key: XPPC-MIB.upsSmartBatteryRunTimeRemaining delay: 5m units: s description: 'The UPS battery run time remaining before battery exhaustion, in seconds.' tags: - tag: Application value: Battery - uuid: 6e4ea14193444c7c84e16690891ca928 name: 'Battery temperature' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.2.3.0 key: XPPC-MIB.upsSmartBatteryTemperature delay: 5m units: °C description: 'The current internal UPS temperature expressed in tenths of a Celsius degree.' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Battery - uuid: 43d8a8dbbbef4ab993520f662bf0b878 name: 'Battery current voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.2.2.2.0 key: XPPC-MIB.upsSmartBatteryVoltage delay: 5m units: VDC description: 'The current battery voltage expressed in 1/10 VDC' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Battery - uuid: cdd91d1b7bb34d5e8c88f31158a6e8c9 name: Alarm type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.4.0 key: XPPC-MIB.upsSmartConfigAlarm delay: 5m description: 'A flag indicating how the UPS should handle audible line fail alarms.' valuemap: name: 'XPPC-MIB::upsSmartConfigAlarm' tags: - tag: Application value: Config - uuid: 5a01d4df56a14a56a3d0b2c7d9d2163a name: 'Alarm timer' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.5.0 key: XPPC-MIB.upsSmartConfigAlarmTimer delay: 5m units: s description: | The time in seconds after initial line failure at which the UPS begins emitting audible alarms (beeping). This timer is observerd only if the value of extControlAlarm is timed(2). Allowed values are 0 or 30 seconds. If a value other than a supported value is provided in a set request, the UPS interprets it as a the next lower acceptable value. If the provided value is lower than the lowest acceptable value, the lowest acceptable value is used. tags: - tag: Application value: Config - uuid: 48748e15c6484c0dbeeba425d82a430f name: 'Hight transfer voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.1.0 key: XPPC-MIB.upsSmartConfigHighTransferVolt delay: 5m units: VAC description: | The maximum line voltage in 1/10 VAC allowed before the UPS system transfers to battery backup. Allowed value depend on the UPS used: 120 Volt units allow settings of 1290, 1320, 1350, 1380. 100 Volt units allow settings of 1080, 1100, 1120, 1140. 230 Volt units allow settings of 2530, 2640, 2710, 2800. 208 Volt units allow settings of 2240, 2290, 2340, 2390. If a value other than a supported value is provided in a set request, the UPS interprets it as the next lower acceptable value. If the provided value is lower than the lowest acceptable value, the lowest acceptable value is used. preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Config - uuid: 9d1c0cbd27d344cc97aaeeb5710f2014 name: 'Low battery run time' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.8.0 key: XPPC-MIB.upsSmartConfigLowBatteryRunTime delay: 5m units: s description: | The desired run time in seconds once the low battery condition is reached. Allowed values are 120, 300, 420, or 600 seconds. During this time the UPS will produce a constant warning tone which can not be disabled. If a value other than a supported value is provided in a set request, the UPS interprets it as a the next higher acceptable value. If the provided value is higher than the highest acceptable value, the highest acceptable value is used. tags: - tag: Application value: Config - uuid: f429312e0e2d416294412358d794878d name: 'Low transfer voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.3.0 key: XPPC-MIB.upsSmartConfigLowTransferVol delay: 5m units: VAC description: | The minimum line voltage in 1/10 VAC allowed before the UPS system transfers to battery backup. Allowable values depend on the UPS used: 120 Volt units allow settings of 970, 1000, 1030, 1060. 100 Volt units allow settings of 810, 830, 850, 870. 230 Volt units allow settings of 1880, 1960, 2040, 2080. 208 Volt units allow settings of 1680, 1720, 1770, 1820. If a value other than a supported value is provided in a set request, the UPS interprets it as a the next higher acceptable value. If the provided value is higher than the highest acceptable value, the highest acceptable value is used. preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Config - uuid: 4f061ebb76614510b8c53654b80043b4 name: 'Minimim return capacity' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.6.0 key: XPPC-MIB.upsSmartConfigMinReturnCapacity delay: 5m units: '%' description: | The minimum battery capacity as a percent of full capacity required before the UPS will return from a low battery shutdown condition. In other words, the UPS will not re-energize the output until the battery capacity is equal to this value. Allowed values are 0, 10, 25, or 90 percent. If a value other than a supported value is provided in a set request, the UPS interprets it as a the next higher acceptable value. If the provided value is higher than the highest acceptable value, the highest acceptable value is used. tags: - tag: Application value: Config - uuid: f161b7d636f5458fb0f316ec85825eac name: 'Rated output voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.1.0 key: XPPC-MIB.upsSmartConfigRatedOutputVoltage delay: 5m units: VAC description: | The nominal output voltage from the UPS in 1/10 VAC. Possible values are 1000, 1200, 2080, 2200, 2250, 2300 and 2400. NOTE: Only units that are 2200, 2250, 2300 and 2400 can be changed. Allowable values are 2200, 2250, 2300 and 2400. For these adjustable units, if a value other than a supported value is provided in a set request, the UPS interprets it as the next lower acceptable value. If the provided value is lower than the lowest acceptable value, the lowest acceptable value is used. preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Config - uuid: 0680a1c4f6c1476f87cdf9a580b5dfbc name: 'Return delay' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.9.0 key: XPPC-MIB.upsSmartConfigReturnDelay delay: 5m units: s description: | The delay in seconds after utility line power returns before the UPS will turn on. This value is also used when the UPS comes out of a reboot and before the UPS wakes up from 'sleep' mode. Allowed values are 0, 60, 180 and 300 seconds. If a value other than a supported value is provided in a set request, the UPS interprets it as a the next higher acceptable value. If the provided value is higher than the highest acceptable value, the highest acceptable value is used. tags: - tag: Application value: Config - uuid: acb2496ec61d48e69e9b863e211752d8 name: Sensitivity type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.7.0 key: XPPC-MIB.upsSmartConfigSensitivity delay: 5m description: 'The sensitivity of the UPS to utility line abnormalities or noises.' valuemap: name: 'XPPC-MIB::upsSmartConfigSensitivity' tags: - tag: Application value: Config - uuid: 4ed03024494a4166998451880346f39e name: 'Set EEPROM defaults' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.12.0 key: XPPC-MIB.upsSmartConfigSetEEPROMDefaults delay: 5m description: | WRITE: Resets the UPS EEPROM variables to default values. READ: returns 0 tags: - tag: Application value: Config - uuid: 40a0ce34e1b54ef190e75f83965267eb name: 'Shut off delay' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.10.0 key: XPPC-MIB.upsSmartConfigShutoffDelay delay: 5m units: s description: | The delay in seconds the UPS remains on after being told to turn off. Allowed values are 12, 18, 24, 30, 36, 42, 48, 54, 60, 120, 180, 240, 300, 360, 420, 480, 540, and 600 seconds. If a value other than a supported value is provided in a set request, the UPS interprets it as next higher acceptable value. If the provided value is higher than the highest acceptable value, the highest acceptable value is used. tags: - tag: Application value: Config - uuid: 7ca24d3725ac4e4aa42b571e641592ee name: 'UPS sleep time' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.5.2.11.0 key: XPPC-MIB.upsSmartConfigUpsSleepTime delay: 5m units: m description: | The time in minutes for the UPS to go to 'sleep' when instructed. When in sleep mode, the UPS will not provide output power regardless of the input line state. Once the specified time has elapsed, output power will be restored. This is a configuration setting. The UPS will not go to sleep until told to do so by the manager from a management station. Any input value is allowed, however the UPS only recognizes 0 - 9999 minutes in one minute increments. If the provided value is higher than the highest acceptable value, the highest acceptable value is used. tags: - tag: Application value: Config - uuid: 66f8fed2327d4b979a61c4926952896f name: 'Control flash and beep' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.6.2.5.0 key: XPPC-MIB.upsSmartControlFlashAndBeep delay: 5m description: | UPS to identify itself by lighting all indicators and beeping. Setting this variable to FlashAndBeep(2) causes the UPS lights all panel indicators and beeps. Setting this value to noFlashAndBeep(1) has no effect. The value noFlashAndBeep(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsSmartControlFlashAndBeep' tags: - tag: Application value: Control - uuid: 1b785b5647e6432094137afe85c9e4f6 name: 'Control reboot ups' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.6.2.2.0 key: XPPC-MIB.upsSmartControlRebootUps delay: 5m description: | Setting this variable to rebootUps(2) causes the UPS to shut off and turn back on. Setting this value to noRebootUps(1) has no effect. The value noRebootUps(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsSmartControlRebootUps' tags: - tag: Application value: Control - uuid: e9fab8ca385a43f592570d980e64629e name: 'Control simulate power fail' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.6.2.4.0 key: XPPC-MIB.upsSmartControlSimulatePowerFail delay: 5m description: | Setting this variable to simulatePowerFailure(2) causes the UPS switch to battery power. Setting this value to noSimulatePowerFailure(1) has no effect. The value noSimulatePowerFailure(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsSmartControlSimulatePowerFail' tags: - tag: Application value: Control - uuid: baf537a764fd489cbe1535dc55718f8c name: 'Control turn on ups load' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.6.2.6.0 key: XPPC-MIB.upsSmartControlTurnOnUpsLoad delay: 5m description: | Setting this variable to upsSmartControlTurnOnUpsLoad(2) causes the UPS switch back to utility power if utility power is present. Setting this value to noUpsSmartControlTurnOnUpsLoad(1) has no effect. The value noUpsSmartControlTurnOnUpsLoad(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsSmartControlTurnOnUpsLoad' tags: - tag: Application value: Control - uuid: 10da2685ae0e41bca1a38af13e49f90e name: 'Control ups sleep' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.6.2.3.0 key: XPPC-MIB.upsSmartControlUpsSleep delay: 5m description: | Setting this variable to putUpsToSleep(2) causes the UPS to go to sleep for the time specified by upsSmartConfigUpsSleepTime. When in sleep mode, the UPS will not provide output power regardless of the input line state. Once the specified time has elapsed, output power will be restored. Setting this value to noPutUpsToSleep(1) has no effect. The value noPutUpsToSleep(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsSmartControlUpsSleep' tags: - tag: Application value: Control - uuid: 5d076f6935794a31b6105fd600272537 name: 'SNMP Proxy agent firmware revision' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.1.2.4.0 key: XPPC-MIB.upsSmartIdentAgentFirmwareRevision delay: 6h history: 30d trends: '0' value_type: TEXT description: 'The firmware revision of the UPS SNMP Proxy agent.' tags: - tag: Application value: General - uuid: 5eb498a9e5604c6d88fa80e63bb27515 name: 'Manufactured date' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.1.2.2.0 key: XPPC-MIB.upsSmartIdentDateOfManufacture delay: 6h history: 30d trends: '0' value_type: TEXT description: 'The date when the UPS was manufactured in mm/dd/yy format.' tags: - tag: Application value: General - uuid: 8548f2d2ad724dfaae68bd2b2fd74969 name: 'Firmware revision' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.1.2.1.0 key: XPPC-MIB.upsSmartIdentFirmwareRevision delay: 6h history: 30d trends: '0' value_type: TEXT description: 'The firmware revision of the UPS system.' tags: - tag: Application value: General - uuid: 38c511b584294302b762a2be73be6c59 name: 'Serial number' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.1.2.3.0 key: XPPC-MIB.upsSmartIdentUpsSerialNumber delay: 6h history: 30d trends: '0' value_type: TEXT description: 'An 8-character string identifying the serial number of the UPS internal microprocessor. This number is set at the factory. NOTE: This number does NOT correspond to the serial number on the rear of the UPS.' tags: - tag: Application value: General - uuid: 7d0605ca557544528b47c88d8c6399d0 name: 'Input frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.3.2.4.0 key: XPPC-MIB.upsSmartInputFrequency delay: 5m units: Hz description: 'The current input frequency to the UPS system in 1/10 Hz.' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Input - uuid: 9c54ffafe3ef4846982d73d451f26ae4 name: 'Input line fail cause' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.3.2.5.0 key: XPPC-MIB.upsSmartInputLineFailCause delay: 5m description: 'The reason for the occurrence of the last transfer to UPS battery power. The variable is set to noTransfer(1) if there is no transfer yet. The variable is set to highLineVoltage(2) if the transfer to battery is caused by an over voltage greater than the high transfer voltage. The variable is set to brownout(3) if the duration of the outage is greater than five seconds and the line voltage is between 40 percent of the rated output voltage and the low transfer voltage. The variable is set to blackout(4) if the duration of the outage is greater than five seconds and the line voltage is between 40 percent of the rated output voltage and ground. The variable is set to smallMomentarySag(5) if the duration of the outage is less than five seconds and the line voltage is between 40 percent of the rated output voltage and the low transfer voltage. The variable is set to deepMomentarySag(6) if the duration of the outage is less than five seconds and the line voltage is between 40 percent of the rated output voltage and ground.' valuemap: name: 'XPPC-MIB::upsSmartInputLineFailCause' tags: - tag: Application value: Input - uuid: af2a7fb55bce4639b54402d544d15d0c name: 'Input line voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.3.2.1.0 key: XPPC-MIB.upsSmartInputLineVoltage delay: 5m units: VAC description: 'The current utility line voltage in 1/10 VAC' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Input - uuid: 6ee868847134441a937a15238da16a44 name: 'Input maximum line voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.3.2.2.0 key: XPPC-MIB.upsSmartInputMaxLineVoltage delay: 5m units: VAC description: 'The maximum utility line voltage in 1/10 VAC over the previous 1 minute period.' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Input - uuid: 853bd173fbad477286bdf0cab66bae6f name: 'Input minimum line voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.3.2.3.0 key: XPPC-MIB.upsSmartInputMinLineVoltage delay: 5m units: VAC description: 'The minimum utility line voltage in 1/10 VAC over the previous 1 minute period.' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Input - uuid: a5122a0c6c13425db31b00ce8ba5661a name: 'Output frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.4.2.2.0 key: XPPC-MIB.upsSmartOutputFrequency delay: 5m units: Hz description: 'The current output frequency of the UPS system in 1/10 Hz.' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Output - uuid: 7e6f45febdd445408c779a29fc3d89d9 name: 'Output load' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.4.2.3.0 key: XPPC-MIB.upsSmartOutputLoad delay: 5m units: '%' description: 'The current UPS load expressed in percent of rated capacity.' tags: - tag: Application value: Output - uuid: dda0b96569384ba096be64ad2d7de535 name: 'Output voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.4.2.1.0 key: XPPC-MIB.upsSmartOutputVoltage delay: 5m units: VAC description: 'The output voltage of the UPS system in 1/10 VAC.' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: Output - uuid: 22ecf733661046af93461d7845baf671 name: 'Test calibration date' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.7.2.8.0 key: XPPC-MIB.upsSmartTestCalibrationDate delay: 6h trends: '0' value_type: TEXT description: 'The date the last UPS runtime calibration was performed in mm/dd/yy format.' tags: - tag: Application value: Test - uuid: 5802831350cc4ecf9b2c8253dd8de889 name: 'Test calibration results' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.7.2.7.0 key: XPPC-MIB.upsSmartTestCalibrationResults delay: 5m description: | The results of the last runtime calibration. Value ok(1) means a successful runtime calibration. Value invalidTest(2) indicates last calibration did not take place since the battery capacity was below 100 percent. Value calibrationInProgress(3) means a calibration is occurring now. valuemap: name: 'XPPC-MIB::upsSmartTestCalibrationResults' tags: - tag: Application value: Test - uuid: 8a15da3e985e41e5bdfb223af6deb19f name: 'Test diagnostics' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.7.2.2.0 key: XPPC-MIB.upsSmartTestDiagnostics delay: 5m description: | Setting this variable to testDiagnostics(2) causes the UPS to perform a diagnostic self test. Setting this value to noTestDiagnostics(1) has no effect. The value noTestDiagnostics(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsSmartTestDiagnosticSchedule' tags: - tag: Application value: Test - uuid: 8df37dfa87604fe2ac43658bd5f2b661 name: 'Test diagnostic schedule' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.7.2.1.0 key: XPPC-MIB.upsSmartTestDiagnosticSchedule delay: 5m description: 'The UPS system''s automatic battery test schedule.' valuemap: name: 'XPPC-MIB::upsSmartTestDiagnosticSchedule' tags: - tag: Application value: Test - uuid: 032280fa332a42f5b6dd2932df791fb9 name: 'Diagnostics results' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.7.2.3.0 key: XPPC-MIB.upsSmartTestDiagnosticsResults delay: 5m description: 'The results of the last UPS diagnostics test performed.' valuemap: name: 'XPPC-MIB::upsSmartTestDiagnosticsResults' tags: - tag: Application value: Test - uuid: 3fb80cd762914c7c9016c86687164178 name: 'Test indicators' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.7.2.5.0 key: XPPC-MIB.upsSmartTestIndicators delay: 5m description: | Setting this variable to testIndicators(2) causes the UPS to perform a front panel indicator (lights) test. Setting this value to noTestIndicators(1) has no effect. The value noTestIndicators(1) will always be returned when the variable is read. valuemap: name: 'XPPC-MIB::upsSmartTestIndicators' tags: - tag: Application value: Test - uuid: bbb65a8a9f7347de86e597ebd5855bf3 name: 'Last diagnostics date' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.7.2.4.0 key: XPPC-MIB.upsSmartTestLastDiagnosticsDate delay: 6h trends: '0' value_type: TEXT description: 'The date the last UPS diagnostics test was performed in mm/dd/yy format.' tags: - tag: Application value: Test - uuid: 66ebff3e54384fd7b35c3dd10675287d name: 'Test runtime calibration' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.7.2.6.0 key: XPPC-MIB.upsSmartTestRuntimeCalibration delay: 5m description: | Setting this variable to performCalibration(2) causes the UPS to discharge to calibrate the UPS. The test will only start if the battery capacity is 100 percent. The test runs until capacity is less than 25 percent. Setting this variable to cancelCurrentCalibration(3) after setting performCalibration(2) will cancel the current discharge. Setting this variable to noPerformCalibration(1) will have no effect. The value noPerformCalibration(1) will always be returned when the variable is read. The result of the calibration will be saved in upsSmartTestCalibrationResult. valuemap: name: 'XPPC-MIB::upsSmartTestRuntimeCalibration' tags: - tag: Application value: Test - uuid: 681ba4c529ea49179e3e1599631e89a1 name: 'Phase battery capacity percentage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.1.2.0 key: XPPC-MIB.upsThreePhaseBatteryCapacityPercentage delay: 5m units: '%' description: 'Battery Capacity Percentage' tags: - tag: Application value: Battery - uuid: f0df810e8e084ab297bc1419c837fc9c name: 'Three phase battery current' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.1.4.0 key: XPPC-MIB.upsThreePhaseBatteryCurrent delay: 5m description: 'Battery Electric Current' tags: - tag: Application value: 'Three phase' - uuid: 5d03680c483942f4881a4e940a55ff00 name: 'Three phase battery temperature' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.1.5.0 key: XPPC-MIB.upsThreePhaseBatteryTemperature delay: 5m units: °C description: 'Battery Temperature' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: 'Three phase' - uuid: 405d893eba424083a4f278b8f6b4d280 name: 'Three phase battery time remain' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.1.3.0 key: XPPC-MIB.upsThreePhaseBatteryTimeRemain delay: 5m units: m description: 'Battery Time Remain (unit is Minute)' tags: - tag: Application value: 'Three phase' - uuid: 4db5c722f66341d99b20dda076f80ae7 name: 'Three Phase Battery Voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.1.1.0 key: XPPC-MIB.upsThreePhaseBatteryVoltage delay: 5m units: V description: 'Battery Voltage' tags: - tag: Application value: 'Three phase' - uuid: 22a8c0ad661b42d99363f3a58838537a name: 'Three phase bypass source frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.4.1.0 key: XPPC-MIB.upsThreePhaseBypassSourceFrequency delay: 5m units: Hz description: 'Bypass Frequency' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: 'Three phase' - uuid: 10e8e51db4ee47d1bdcb7789e328d2dd name: 'Three phase bypss source voltage R' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.4.2.0 key: XPPC-MIB.upsThreePhaseBypssSourceVoltageR delay: 5m units: V description: 'Bypass VoltageR' tags: - tag: Application value: 'Three phase' - uuid: aa1935b757d742d68af234049d211757 name: 'Three phase bypss source voltage S' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.4.3.0 key: XPPC-MIB.upsThreePhaseBypssSourceVoltageS delay: 5m units: V description: 'Bypass VoltageS' tags: - tag: Application value: 'Three phase' - uuid: 1676eda4a9ba4a6db1ecc87e3433945a name: 'Three phase bypss source voltage T' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.4.4.0 key: XPPC-MIB.upsThreePhaseBypssSourceVoltageT delay: 5m units: V description: 'Bypass VoltageT' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: 'Three phase' - uuid: e95062581d5b4e509c06829e879010f9 name: 'Three phase DC and rectifier status battery status' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.5.5.0 key: XPPC-MIB.upsThreePhaseDCandRectifierStatusBatteryStatus delay: 5m description: 'Back Status' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierStatusBatteryStatus' tags: - tag: Application value: 'Three phase' - uuid: 61387e4912594b6faf790700bca3723c name: 'Three phase DC and rectifier status charge status' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.5.6.0 key: XPPC-MIB.upsThreePhaseDCandRectifierStatusChargeStatus delay: 5m description: 'Charge Status' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierStatusChargeStatus' tags: - tag: Application value: 'Three phase' - uuid: 2e25b582fc2c4863b550a7231c861628 name: 'Three phase DC and rectifier status in and out' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.5.4.0 key: XPPC-MIB.upsThreePhaseDCandRectifierStatusInAndOut delay: 5m description: 'In And Put' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierStatusInAndOut' tags: - tag: Application value: 'Three phase' - uuid: d9e29265fdc2450c9d7d1bd12e2521e5 name: 'Three phase DC and rectifier status low battery' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.5.3.0 key: XPPC-MIB.upsThreePhaseDCandRectifierStatusLowBattery delay: 5m description: 'Low Battery' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 1fcd0ec026e0486b8c4b5d5e416f258d name: 'Three phase DC and rectifier status low battery shutdown' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.5.2.0 key: XPPC-MIB.upsThreePhaseDCandRectifierStatusLowBatteryShutdown delay: 5m description: 'Low Battery Shutdown' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: a63be218d3f24d40835cbc48b1a2097f name: 'Three phase DC and rectifier status rectifier operating' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.5.7.0 key: XPPC-MIB.upsThreePhaseDCandRectifierStatusRecOperating delay: 5m description: 'Rectifier Operatin' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 8f38c45a19e94a60b3a63f02b074b845 name: 'Three phase DC and rectifier status rectifier rotation error' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.5.1.0 key: XPPC-MIB.upsThreePhaseDCandRectifierStatusRecRotError delay: 5m description: 'Rectifier Rotation Error' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 90dbbf0da7d94dad9ce757b059bebb31 name: 'Three phase fault status bypass breaker' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.7.3.0 key: XPPC-MIB.upsThreePhaseFaultStatusBypassBreaker delay: 5m description: 'Bypass Breaker' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 71eec0b5ea064167906655aae3f82898 name: 'Three phase fault status emergency stop' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.7.1.0 key: XPPC-MIB.upsThreePhaseFaultStatusEmergencyStop delay: 5m description: 'Emergency Stop' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 5b31002b95494e01981659ca60d46557 name: 'Three phase fault status high DC shutdown' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.7.2.0 key: XPPC-MIB.upsThreePhaseFaultStatusHighDCShutdown delay: 5m description: 'High DC Shutdown' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 7b38cef9f18d4ffd925a6a6216ed10a1 name: 'Three phase fault status inverter output fail' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.7.5.0 key: XPPC-MIB.upsThreePhaseFaultStatusInverterOutputFail delay: 5m description: 'Output Fail' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 106dc2d483714da5a236e687c5045102 name: 'Three phase fault status overLoad' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.7.4.0 key: XPPC-MIB.upsThreePhaseFaultStatusOverLoad delay: 5m description: 'Over Load' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 69892de93c104b93b2e4613f67734ec7 name: 'Three phase fault status over temperature' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.7.6.0 key: XPPC-MIB.upsThreePhaseFaultStatusOverTemperature delay: 5m description: 'Over Temperature' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 38e36631159045c29047293aa64ee18c name: 'Three phase fault status short circuit' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.7.7.0 key: XPPC-MIB.upsThreePhaseFaultStatusShortCircuit delay: 5m description: 'Short Circuit' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 1fbcbb6cd2984b7a877bb7cda5811989 name: 'Three phase input frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.2.1.0 key: XPPC-MIB.upsThreePhaseInputFrequency delay: 5m units: Hz description: 'Input Frequency' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: 'Three phase' - uuid: bfb6e66b2c454d0db1910f2ab45d99fe name: 'Three phase input voltage R' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.2.2.0 key: XPPC-MIB.upsThreePhaseInputVoltageR delay: 5m units: V description: 'Input VoltageR' tags: - tag: Application value: 'Three phase' - uuid: 195701d345154df1997b027fab20b82e name: 'Three phase input voltage S' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.2.3.0 key: XPPC-MIB.upsThreePhaseInputVoltageS delay: 5m units: V description: 'Input VoltageS' tags: - tag: Application value: 'Three phase' - uuid: 260389139f294c75ae94a26bd0b0dd6f name: 'Three phase input voltage T' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.2.4.0 key: XPPC-MIB.upsThreePhaseInputVoltageT delay: 5m units: V description: 'Input VoltageT' tags: - tag: Application value: 'Three phase' - uuid: 8d3fa333d607474f932bc60c900c0bfc name: 'Three phase output frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.3.1.0 key: XPPC-MIB.upsThreePhaseOutputFrequency delay: 5m units: Hz description: 'Output Frequency' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: 'Three phase' - uuid: 4f89d42dd7a0422187a9caa645b22237 name: 'Three phase output load percentage R' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.3.5.0 key: XPPC-MIB.upsThreePhaseOutputLoadPercentageR delay: 5m units: '%' description: 'Load PercentageR' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: 'Three phase' - uuid: bbdaf4e33d8b4b6b95767dfb25c046cb name: 'Three phase output load percentage S' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.3.6.0 key: XPPC-MIB.upsThreePhaseOutputLoadPercentageS delay: 5m units: '%' description: 'Load PercentageS' preprocessing: - type: MULTIPLIER parameters: - '0.1' tags: - tag: Application value: 'Three phase' - uuid: 9e74ef3be93a4521bade9915a0c4228e name: 'Three phase output load percentage T' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.3.7.0 key: XPPC-MIB.upsThreePhaseOutputLoadPercentageT delay: 5m units: '%' description: 'Load PercentageT' tags: - tag: Application value: 'Three phase' - uuid: 77aa2757fe69418cb9f73519021c2523 name: 'Three phase output voltage R' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.3.2.0 key: XPPC-MIB.upsThreePhaseOutputVoltageR delay: 5m units: V description: 'Output VoltageR' tags: - tag: Application value: 'Three phase' - uuid: ce4a9824b0ae47a0ab245d623bf06bd2 name: 'Three phase output voltage S' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.3.3.0 key: XPPC-MIB.upsThreePhaseOutputVoltageS delay: 5m units: V description: 'Output VoltageS' tags: - tag: Application value: 'Three phase' - uuid: 418c966656764957b2d23cead38b1e63 name: 'Three phase output voltage T' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.3.4.0 key: XPPC-MIB.upsThreePhaseOutputVoltageT delay: 5m units: V description: 'Output VoltageT' tags: - tag: Application value: 'Three phase' - uuid: 0f00ae3aa7ca40278916bb69b967506f name: 'Three phase rating battery voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.8.7.0 key: XPPC-MIB.upsThreePhaseRatingBatteryVoltage delay: 5m units: V description: 'Battery Voltage' tags: - tag: Application value: 'Three phase' - uuid: 331e3bd4ff85466c8cc34c05de6ebd44 name: 'Three phase rating bypass frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.8.4.0 key: XPPC-MIB.upsThreePhaseRatingBypassFrequency delay: 5m trends: '0' value_type: TEXT description: 'Bypass Frequency' tags: - tag: Application value: 'Three phase' - uuid: d8da627ac039413cb3c75f36c2b1c523 name: 'Three phase rating bypass voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.8.3.0 key: XPPC-MIB.upsThreePhaseRatingBypassVoltage delay: 5m description: 'Bypass Voltage' tags: - tag: Application value: 'Three phase' - uuid: c7b065c3932b4f96a9d01d18df465a1b name: 'Three phase rating output frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.8.6.0 key: XPPC-MIB.upsThreePhaseRatingOutputFrequency delay: 5m units: Hz description: 'Output Frequency' tags: - tag: Application value: 'Three phase' - uuid: 9f57334cc87148fbafcbda61f0558d38 name: 'Three phase rating output voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.8.5.0 key: XPPC-MIB.upsThreePhaseRatingOutputVoltage delay: 5m trends: '0' value_type: TEXT description: 'Output Voltage' tags: - tag: Application value: 'Three phase' - uuid: 99ad2a7e371d4ab18832b669b59a72a9 name: 'Three phase rating power' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.8.8.0 key: XPPC-MIB.upsThreePhaseRatingPower delay: 5m trends: '0' value_type: TEXT description: 'Power Rating' tags: - tag: Application value: 'Three phase' - uuid: 4ce5673e5c2543c48477a2b7c33bf19b name: 'Three phase rating rectifier frequency' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.8.2.0 key: XPPC-MIB.upsThreePhaseRatingRectifierFrequency delay: 5m units: Hz description: 'Rectifier Frequency' tags: - tag: Application value: 'Three phase' - uuid: d7454bc007ef449b995fee8724aeb426 name: 'Three phase rating rectifier voltage' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.8.1.0 key: XPPC-MIB.upsThreePhaseRatingRectifierVoltage delay: 5m trends: '0' value_type: TEXT description: 'Rectifier Voltage' tags: - tag: Application value: 'Three phase' - uuid: 7a438218124d4903a9080d96b8b84af6 name: 'Three phase UPS static switch mode' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.6.4.0 key: XPPC-MIB.upsThreePhaseUPSStaticSwitchMode delay: 5m description: 'Switch Mode' valuemap: name: 'XPPC-MIB::upsThreePhaseUPSStaticSwitchMode' tags: - tag: Application value: 'Three phase' - uuid: 5a8285abaeb141ab94681a18c9615b1b name: 'Three phase UPS status AC status' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.6.3.0 key: XPPC-MIB.upsThreePhaseUPSStatusACStatus delay: 5m description: 'AC Status' valuemap: name: 'XPPC-MIB::upsThreePhaseUPSStatusACStatus' tags: - tag: Application value: 'Three phase' - uuid: 91e3b9f47c084521bb9ed8f3cd3d3dfa name: 'Three phase UPS status bypass frequency fail' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.6.1.0 key: XPPC-MIB.upsThreePhaseUPSStatusBypassFreqFail delay: 5m description: 'Bypass Status' valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 82dff0c2f4aa4d6e95c044c0cb612433 name: 'Three phase UPS status inverter operating' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.6.5.0 key: XPPC-MIB.upsThreePhaseUPSStatusInverterOperating delay: 5m description: Operating valuemap: name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' tags: - tag: Application value: 'Three phase' - uuid: 78f52e2faff843498e3e91c41ff39b77 name: 'Three phase UPS status manual bypass breaker' type: SNMP_AGENT snmp_oid: .1.3.6.1.4.1.935.1.1.1.8.6.2.0 key: XPPC-MIB.upsThreePhaseUPSStatusManualBypassBreaker delay: 5m description: 'Breaker Status' valuemap: name: 'XPPC-MIB::upsThreePhaseUPSStatusManualBypassBreaker' tags: - tag: Application value: 'Three phase' discovery_rules: - uuid: 407bb1d23715406f944047bdb5a06474 name: Devices type: SNMP_AGENT snmp_oid: 'discovery[{#UPSDEVICEID},1.3.6.1.4.1.935.1.1.1.5.1.2.1.1,{#UPSDEVICENAME},1.3.6.1.4.1.935.1.1.1.5.1.2.1.2]' key: XPPC-MIB.indexOfDevice delay: 1h description: 'Discovery pluged devices' item_prototypes: - uuid: 9add5e4cb8954e03bec65b820c713b09 name: 'Device {#UPSDEVICENAME} accept' type: SNMP_AGENT snmp_oid: '1.3.6.1.4.1.935.1.1.1.5.1.2.1.4.{#UPSDEVICEID}' key: 'XPPC-MIB[deviceAccept.{#UPSDEVICEID}]' delay: 5m description: 'An entry is added if yes, the entry is deleted if no.' valuemap: name: 'XPPC-MIB::yes/no' tags: - tag: Application value: Config - uuid: 98e4c4c68a424f0385a153ae21e505e1 name: 'Device {#UPSDEVICENAME} id' type: SNMP_AGENT snmp_oid: '1.3.6.1.4.1.935.1.1.1.5.1.2.1.1.{#UPSDEVICEID}' key: 'XPPC-MIB[nameOfDevice.{#UPSDEVICEID}]' delay: 6h trends: '0' value_type: TEXT description: 'The index of the device that is plugged into the UPS.' tags: - tag: Application value: Config - uuid: 5e64daed15af4de19d84a4873184758c name: 'Devices {#UPSDEVICENAME} rating' type: SNMP_AGENT snmp_oid: '1.3.6.1.4.1.935.1.1.1.5.1.2.1.3.{#UPSDEVICEID}' key: 'XPPC-MIB[vaRatingOfDevice.{#UPSDEVICEID}]' delay: 5m description: 'The volt-amp rating of the device plugged into the UPS' tags: - tag: Application value: Config - uuid: f7a82310a9b443da876894a00d78199e name: Traps type: SNMP_AGENT snmp_oid: 'discovery[{#TRAPID},1.3.6.1.4.1.935.2.1.2.1.1]' key: XPPC-MIB.trapsIndex delay: 1h description: 'Discovery traps' item_prototypes: - uuid: 1a137d65c7f24b4083a0a7a2689470ab name: 'Receiver {#TRAPID} accept' type: SNMP_AGENT snmp_oid: '1.3.6.1.4.1.935.2.1.2.1.5.{#TRAPID}' key: 'XPPC-MIB[receiverAccept.{#TRAPID}]' delay: 5m description: 'An entry will become active if yes, and will be deleted if no.' valuemap: name: 'XPPC-MIB::yes/no' tags: - tag: Application value: Trap - uuid: fb0512b287404f32addeb99e8c5a69e9 name: 'Receiver {#TRAPID} community string' type: SNMP_AGENT snmp_oid: '1.3.6.1.4.1.935.2.1.2.1.3.{#TRAPID}' key: 'XPPC-MIB[receiverCommunityString.{#TRAPID}]' delay: 6h trends: '0' value_type: TEXT description: 'The community name to use in the trap when sent to the manager.' tags: - tag: Application value: Trap - uuid: 184167f715c44c8cab68bd89c9f40b9b name: 'Severity level {#TRAPID}' type: SNMP_AGENT snmp_oid: '1.3.6.1.4.1.935.2.1.2.1.4.{#TRAPID}' key: 'XPPC-MIB[severityLevel.{#TRAPID}]' delay: 5m description: 'The severity threshold of traps to send to the manager. Traps are labeled in severity as informational(1), warning(2), severe(3). Only traps of equal or greater severity than this value are sent to the manager.' valuemap: name: 'XPPC-MIB::severityLevel' tags: - tag: Application value: Trap - uuid: 14f22a28dd504a9db3c1d01f4a795653 name: 'Trap {#TRAPID} receiver address' type: SNMP_AGENT snmp_oid: '1.3.6.1.4.1.935.2.1.2.1.2.{#TRAPID}' key: 'XPPC-MIB[trapsReceiverAddr.{#TRAPID}]' delay: 6h trends: '0' value_type: TEXT description: 'The IP address of the manager to send a trap to.' tags: - tag: Application value: Trap macros: - macro: '{$CRITICAL_BATTERY_TIME}' value: 20m - macro: '{$CRITYICAL_BATTERY_CAPACITY}' value: '50' valuemaps: - uuid: 01e9606bca4144e5aa6b975cb88d8e5f name: 'XPPC-MIB::severityLevel' mappings: - value: '1' newvalue: information - value: '2' newvalue: warning - value: '3' newvalue: severe - uuid: b399702438dd40a2899be6cec457e711 name: 'XPPC-MIB::upsBaseBatteryStatus' mappings: - value: '1' newvalue: unknown - value: '2' newvalue: batteryNormal - value: '3' newvalue: batteryLow - uuid: b87e11403e56489b88cbbe0d45e5d62a name: 'XPPC-MIB::upsBaseControlConserveBattery' mappings: - value: '1' newvalue: noTurnOffUps - value: '2' newvalue: turnUpsOffToConserveBattery - value: '3' newvalue: turnUpsOffToConserveBatteryDelay - uuid: 41123e5301d54f03b03cd07ad9e70a89 name: 'XPPC-MIB::upsBaseOutputStatus' mappings: - value: '1' newvalue: unknown - value: '2' newvalue: onLine - value: '3' newvalue: onBattery - value: '4' newvalue: onBoost - value: '5' newvalue: sleeping - value: '6' newvalue: onBypass - value: '7' newvalue: rebooting - value: '8' newvalue: standBy - value: '9' newvalue: onBuck - uuid: 98c134a70c894463beef4d931f64a056 name: 'XPPC-MIB::upsNormal/Abnormal' mappings: - value: '1' newvalue: normal - value: '2' newvalue: abnormal - uuid: bfefbc36fe6f4317ac6631369d2dedf1 name: 'XPPC-MIB::upsSmartBatteryReplaceIndicator' mappings: - value: '1' newvalue: noBatteryNeedsReplacing - value: '2' newvalue: batteryNeedsReplacing - uuid: a03411473d9f454ca0d43cc66d6f7209 name: 'XPPC-MIB::upsSmartConfigAlarm' mappings: - value: '1' newvalue: timed - value: '2' newvalue: atLowBattery - value: '3' newvalue: never - uuid: fea0afa5e7764a77a24751ccdb7b8b62 name: 'XPPC-MIB::upsSmartConfigSensitivity' mappings: - value: '1' newvalue: auto - value: '2' newvalue: low - value: '3' newvalue: medium - value: '4' newvalue: high - uuid: c99b8822aeab45119eee263d0d50c986 name: 'XPPC-MIB::upsSmartControlFlashAndBeep' mappings: - value: '1' newvalue: noFlashAndBeep - value: '2' newvalue: flashAndBeep - uuid: 392e07ee7bb041c1ab3c3ada15431522 name: 'XPPC-MIB::upsSmartControlRebootUps' mappings: - value: '1' newvalue: noRebootUps - value: '2' newvalue: rebootUps - uuid: 42e3769032814092a604d781f2c3f313 name: 'XPPC-MIB::upsSmartControlSimulatePowerFail' mappings: - value: '1' newvalue: noSimulatePowerFailure - value: '2' newvalue: simulatePowerFailure - uuid: c6883d1f7c8f413baadc0a762ac278b7 name: 'XPPC-MIB::upsSmartControlTurnOnUpsLoad' mappings: - value: '1' newvalue: noUpsSmartControlTurnOnUpsLoad - value: '2' newvalue: upsSmartControlTurnOnUpsLoad - uuid: e383c4ff15334386baf3b56cde128427 name: 'XPPC-MIB::upsSmartControlUpsOff' mappings: - value: '1' newvalue: noTurnUpsOff - value: '2' newvalue: turnUpsOff - uuid: 9881e24042674cef9f827c9e83f06246 name: 'XPPC-MIB::upsSmartControlUpsSleep' mappings: - value: '1' newvalue: noPutUpsToSleep - value: '2' newvalue: putUpsToSleep - uuid: 577d776b9d1147dc8c86e0c24ea28a9e name: 'XPPC-MIB::upsSmartInputLineFailCause' mappings: - value: '1' newvalue: noTransfer - value: '2' newvalue: highLineVoltage - value: '3' newvalue: brownout - value: '4' newvalue: blackout - value: '5' newvalue: smallMomentarySag - value: '6' newvalue: deepMomentarySag - value: '7' newvalue: smallMomentarySpike - value: '8' newvalue: largeMomentarySpike - uuid: 4bac9ddc53cb45948538ce6ba1cd25ec name: 'XPPC-MIB::upsSmartTestCalibrationResults' mappings: - value: '1' newvalue: ok - value: '2' newvalue: invalidTest - value: '3' newvalue: calibrationInProgress - uuid: 26ee15147ce9458889867b4155c14807 name: 'XPPC-MIB::upsSmartTestDiagnosticSchedule' mappings: - value: '1' newvalue: unknown - value: '2' newvalue: biweekly - value: '3' newvalue: weekly - value: '4' newvalue: never - uuid: 8f26774e9d074ec9995498db7cd10e13 name: 'XPPC-MIB::upsSmartTestDiagnosticsResults' mappings: - value: '1' newvalue: ok - value: '2' newvalue: failed - value: '3' newvalue: invalidTest - value: '4' newvalue: testInProgress - uuid: 458924c1b53a4c668e0b1ffa04363267 name: 'XPPC-MIB::upsSmartTestIndicators' mappings: - value: '1' newvalue: noTestIndicators - value: '2' newvalue: testIndicators - uuid: f576988e99234107b0ea4f81c8b14ffd name: 'XPPC-MIB::upsSmartTestRuntimeCalibration' mappings: - value: '1' newvalue: noPerformCalibration - value: '2' newvalue: performCalibration - value: '3' newvalue: cancelCurrentCalibration - uuid: 0c74ca21f9ff417987005cc91199e244 name: 'XPPC-MIB::upsThreePhaseDCandRectifierStatusBatteryStatus' mappings: - value: '4' newvalue: backup - value: '5' newvalue: acnormal - uuid: 5b03177d8f234c6491cd1e055d86b991 name: 'XPPC-MIB::upsThreePhaseDCandRectifierStatusChargeStatus' mappings: - value: '6' newvalue: boost - value: '7' newvalue: float - value: '16' newvalue: 'no' - uuid: 883d565dea304548b845157b13581eb6 name: 'XPPC-MIB::upsThreePhaseDCandRectifierStatusInAndOut' mappings: - value: '2' newvalue: threeInOneOut - value: '3' newvalue: threeInThreeOut - uuid: 013d736de5f147409ce7eb1033d1b347 name: 'XPPC-MIB::upsThreePhaseDCandRectifierYes/No' mappings: - value: '14' newvalue: 'yes' - value: '16' newvalue: 'no' - uuid: bccde074f6ed402cb7a815b591dedad3 name: 'XPPC-MIB::upsThreePhaseUPSStaticSwitchMode' mappings: - value: '12' newvalue: invermode - value: '13' newvalue: bypassmode - uuid: e02abfd9f46e4dfca08f77ef05bd1beb name: 'XPPC-MIB::upsThreePhaseUPSStatusACStatus' mappings: - value: '10' newvalue: normal - value: '11' newvalue: abnormal - uuid: cf97968204a6431fa4edbfda601bd781 name: 'XPPC-MIB::upsThreePhaseUPSStatusManualBypassBreaker' mappings: - value: '8' newvalue: close - value: '9' newvalue: open - uuid: 626d04e0a4174096acb0c3c66dc15a81 name: 'XPPC-MIB::yes/no' mappings: - value: '1' newvalue: 'yes' - value: '2' newvalue: 'no' - uuid: 37e5eb5606bc4abba66c8b20381a1e8a template: 'Template Module ICMP Ping' name: 'Template Module ICMP Ping' description: 'Template Module ICMP Ping version: 0.12' groups: - name: Templates/Modules items: - uuid: db5a94f6cea14deba957202b2f014469 name: 'ICMP ping' type: SIMPLE key: icmpping delay: '60' history: 1w valuemap: name: 'Service state' tags: - tag: Application value: Status triggers: - uuid: b030876299434f3ba43e11c584104a81 expression: 'max(/Template Module ICMP Ping/icmpping,#3)=0' name: 'Unavailable by ICMP ping' priority: HIGH description: | Last value: {ITEM.LASTVALUE1}. Last three attempts returned timeout. Please check device connectivity. - uuid: 04b21adaf422473a88df2c52786474ed name: 'ICMP loss' type: SIMPLE key: icmppingloss delay: '60' history: 1w value_type: FLOAT units: '%' tags: - tag: Application value: Status triggers: - uuid: 42c4b0310aaf4b9c8cb502542b7dea90 expression: 'min(/Template Module ICMP Ping/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Template Module ICMP Ping/icmppingloss,5m)<100' name: 'High ICMP ping loss' priority: WARNING dependencies: - name: 'Unavailable by ICMP ping' expression: 'max(/Template Module ICMP Ping/icmpping,#3)=0' - uuid: a79e33e5fd264725b934f603fa071555 name: 'ICMP response time' type: SIMPLE key: icmppingsec delay: '60' history: 1w value_type: FLOAT units: s tags: - tag: Application value: Status triggers: - uuid: 32b4d8f3eba34bd380803410111d4b7f expression: 'avg(/Template Module ICMP Ping/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}' name: 'High ICMP ping response time' priority: WARNING dependencies: - name: 'High ICMP ping loss' expression: 'min(/Template Module ICMP Ping/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Template Module ICMP Ping/icmppingloss,5m)<100' - name: 'Unavailable by ICMP ping' expression: 'max(/Template Module ICMP Ping/icmpping,#3)=0' macros: - macro: '{$ICMP_LOSS_WARN}' value: '20' - macro: '{$ICMP_RESPONSE_TIME_WARN}' value: '0.15' valuemaps: - uuid: bdb5d65d925542eaa61c302dc40fbfe8 name: 'Service state' mappings: - value: '0' newvalue: Down - value: '1' newvalue: Up