5.02021-11-21T21:50:30ZExtra TemplatesAirco pCOWebAirco pCOWeb## Overview
Generic template for Airco compute. This compute is used on most air cooling system.
Monitored items (when supported by hardware):
- Common Alarm Active
- Compressor is Active
- Humidifier Maintenance Warning
- Humidity Setpoint
- Liquid Pressure
- Number of network interfaces
- Room Humidity
- Room Temperature (incoming air flow)
- Setpoint Cooling Temperature
- Setpoint Heating Temperature
- Supply Fan
- Supply Temperature (outgoing air flow)
- Unit is Active
## Author
eric_at_2037
Extra TemplatesEnvironmentGeneralInErrorsInterfacesInTrafficOutErrorsOutTrafficSystemTemperature- Common Alarm ActiveSNMP_AGENT.1.3.6.1.4.1.9839.2.1.1.18.0airco.CommonAlarm607dSystemPOST{last()}>0General Alarm Active on {HOST.HOST}HIGH
- Compressor is ActiveSNMP_AGENT.1.3.6.1.4.1.9839.2.1.1.2.0airco.compressoractive603650dSystemPOST
- CPU UsageSNMP_AGENT.iso.org.dod.internet.private.enterprises.ucdavis.systemStats.ssCpuSystem.0airco.cpu607dFLOAT%SystemPOST
- Room HumiditySNMP_AGENT.1.3.6.1.4.1.9839.2.1.2.1.0airco.humidity3007dDISABLEDFLOAT%RHEnvironmentMULTIPLIER0.1POST{last()}<20Room Humidity @ {HOST.HOST} < 20%DISABLEDWARNING{last()}>80Room Humidity @ {HOST.HOST} > 80%DISABLEDWARNING
- Humidifier Maintenance WarningSNMP_AGENT.1.3.6.1.4.1.9839.2.1.1.75.0airco.hummaint607dSystemPOST{last()}>0Human Maintenance Requested on {HOST.HOST}AVERAGE
- Humidity SetpointSNMP_AGENT.1.3.6.1.4.1.9839.2.1.2.7.0airco.humsetpoint3007dDISABLED%RHEnvironmentMULTIPLIER0.1POST
- Liquid PressureSNMP_AGENT.1.3.6.1.4.1.9839.2.1.2.5.0airco.pressure3007dDISABLEDBarSystemMULTIPLIER0.1POST
- Room Temperature (incoming air flow)SNMP_AGENT.1.3.6.1.4.1.9839.2.1.2.1.0airco.roomtemp603650dFLOAT°CTemperatureMULTIPLIER0.1POST{last()}<16Room Temperature @ {HOST.HOST} is < 16WARNING{last()}>28Room Temperature @ {HOST.HOST} is > 28HIGH
- Setpoint Cooling TemperatureSNMP_AGENT.1.3.6.1.4.1.9839.2.1.2.20.0airco.setpointcooling3007d3650dFLOAT°CTemperatureMULTIPLIER0.1POST{last()}>25Set Point Temperature on {HOST.HOST} > 25°CDISABLEDAVERAGE
- Setpoint Heating TemperatureSNMP_AGENT.1.3.6.1.4.1.9839.2.1.2.21.0airco.setpointheating3007d3650dDISABLEDFLOAT°CTemperatureMULTIPLIER0.1POST
- Supply FanSNMP_AGENT.1.3.6.1.4.1.9839.2.1.2.13.0airco.supplyfan607dDISABLEDFLOAT%GeneralPOST{last()}>80Supply Fan on {HOST.HOST} Runs > 80%DISABLEDWARNING
- Supply Temperature (outgoing air flow)SNMP_AGENT.1.3.6.1.4.1.9839.2.1.2.3.0airco.supplytemp603650dFLOAT°CTemperatureMULTIPLIER0.1POST
- Unit is ActiveSNMP_AGENT.1.3.6.1.4.1.9839.2.1.1.1.0airco.unitactive6030d3650dSystemPOST
- Number of network interfacesSNMP_AGENTIF-MIB::ifNumber.0ifNumber36007dThe number of network interfaces (regardless of their current state) present on this system.SystemPOST
- Device contact detailsSNMP_AGENTSNMPv2-MIB::sysContact.0sysContact36007d0CHARThe textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.CONTACTGeneralPOST
- Device descriptionSNMP_AGENTSNMPv2-MIB::sysDescr.0sysDescr36007d0CHARA textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.HARDWAREGeneralPOST
- Device locationSNMP_AGENTSNMPv2-MIB::sysLocation.0sysLocation36007d0CHARThe physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.LOCATIONGeneralPOST
- Device nameSNMP_AGENTSNMPv2-MIB::sysName.0sysName36007d0CHARAn administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.NAMEGeneralPOST
- Device uptimeSNMP_AGENTSNMPv2-MIB::sysUpTime.0sysUpTime607duptimeThe time since the network management portion of the system was last re-initialized.GeneralMULTIPLIER0.01POST
Network interfacesSNMP_AGENTdiscovery[{#SNMPVALUE},IF-MIB::ifDescr]ifDescr60You may also consider using IF-MIB::ifType or IF-MIB::ifAlias for discovery depending on your filtering needs.
{$SNMP_COMMUNITY} is a global macro.Alias of interface $1SNMP_AGENTIF-MIB::ifAlias.{#SNMPINDEX}ifAlias[{#SNMPVALUE}]36007d0CHARInterfacesPOSTDescription of interface $1SNMP_AGENTIF-MIB::ifDescr.{#SNMPINDEX}ifDescr[{#SNMPVALUE}]36007d0CHARA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.InterfacesPOSTInbound errors on interface $1SNMP_AGENTIF-MIB::ifInErrors.{#SNMPINDEX}ifInErrors[{#SNMPVALUE}]607dInErrorsCHANGE_PER_SECONDPOSTIncoming traffic on interface $1SNMP_AGENTIF-MIB::ifInOctets.{#SNMPINDEX}ifInOctets[{#SNMPVALUE}]607dbpsThe number of octets in valid MAC frames received on this interface, including the MAC header and FCS.InTrafficCHANGE_PER_SECONDMULTIPLIER8POSTOutbound errors on interface $1SNMP_AGENTIF-MIB::ifOutErrors.{#SNMPINDEX}ifOutErrors[{#SNMPVALUE}]607dFor packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.OutErrorsCHANGE_PER_SECONDPOSTOutgoing traffic on interface $1SNMP_AGENTIF-MIB::ifOutOctets.{#SNMPINDEX}ifOutOctets[{#SNMPVALUE}]607dbpsThe number of octets transmitted in MAC frames on this interface, including the MAC header and FCS.OutTrafficCHANGE_PER_SECONDMULTIPLIER8POSTPOSTUnit StatusSTACKED00CC00- Airco pCOWebairco.unitactive
1FILLED_REGION3333FF- Airco pCOWebairco.compressoractive
2BOLD_LINEDD0000- Airco pCOWebairco.CommonAlarm
Unit TemperatureNOFF5555- Airco pCOWebairco.roomtemp
1DASHED_LINE9999FF- Airco pCOWebairco.supplytemp
2DOTTED_LINEFF0000- Airco pCOWebairco.setpointcooling
3DOTTED_LINE0000FF- Airco pCOWebairco.setpointheating