zabbix_export:
  version: '6.0'
  date: '2021-11-21T21:26:08Z'
  groups:
    -
      uuid: 7df96b18c230490a9a0a9e2307226338
      name: Templates
  templates:
    -
      uuid: 2995f3a7adbb492ab05460ab2088635f
      template: 'SNMP MegaRAID SAS'
      name: 'SNMP MegaRAID SAS'
      description: |
        ## Description
        
        Zabbix Template for Avago Megaraid SAS (formerly LSI) RAID cards
        
        ## Overview
        
        This is initial template for Monitoring LSI/Avago/Broadcom (or branded like Intel, IBM, Supermicro etc) MegaRAID based hardware RAID cards. According to vendor docs it should also support non-RAID adapters, enclosures and some other devices.
        
        
        It took me one night to complete major/required parts, so far template supports most of the options and all the critical components to keep you warned in case some RAID-related problems will occur.
        
        
        Supported so far:
        
        
        * Full LLD Support
        * Informational part for agent/driver/module
        * Complete Adapter-Related OID list with graphs and triggers
        * Part of Device-Related OID's with graphs
        * All triggers that are crucial
        * Comments for all OID's with value mappings from MegaRAID MIB
        
        
        Planned:
        
        
        * Value Mappings
        * Completing list of device OID's and related graphs
        * virtualDevice OID's and related graphs
        * enclosureInfo OID's and related graphs
        * Trap setting OID's
        * Traps for trapper
        * Check for updated version
        
        
        Not tested yet:
        
        
        * M$ Windows Support
        * Values and units are done as per MIB doc with 1-1 match, cannot guarantee that they are correct if vendor has provided wrong info (apparently, there is at least one minor issue)
        
        
        Installation and Requirements:
        
        
        * Ensure, that LSI-MegaRAID-SAS-MIB files downloaded from vendor site are installed and added to snmp.conf (after that you can restart both agent and server)
        * Ensure, that appropriate package (snmp sas or snmp sas\_ir) with MegaRAID snmp agent wrapper is installed and running, snmpd.conf for OID's are set as per doc for wrapper
        * Ensure, that Zabbix is allowed to gather information from snmpd
        * Ensure, that required device drivers are installed on the hosts
        * Import Template, assign to hosts
        * Wait for LLD to check all OID's and start gathering data
        * Have a good night's sleep
        
        
        Bugs?  
        -> Please Report @GitHub or at giomac gmail com  
          
        
        
        
        When will you finish this?  
        -> Nah, all critical issues are included, will do, definitely, but not asap
        
        
        
        ## Author
        
        George Machitidze
        
        
      groups:
        -
          name: Templates
      items:
        -
          uuid: 85fb617c1cca495c920152dc715ca65b
          name: 'MegaRAID SAS MIB Number of SAS adapters present'
          type: SNMP_AGENT
          snmp_oid: 'LSI-MegaRAID-SAS-MIB::adpNumber.0'
          key: adpNumber
          delay: '60'
          history: 30d
          triggers:
            -
              uuid: 6dbcbe8b9353405b8181a7d58bc4536d
              expression: 'last(/SNMP MegaRAID SAS/adpNumber)=0'
              name: 'No MegaRAID adapters present on host'
              priority: HIGH
        -
          uuid: 93ea9db3770a4d92a649a0f3d7c9b340
          name: 'MegaRAID SAS MIB Agent Module Name'
          type: SNMP_AGENT
          snmp_oid: 'LSI-MegaRAID-SAS-MIB::agentModuleName.0'
          key: agentModuleName
          delay: '60'
          history: 365d
          trends: '0'
          value_type: TEXT
        -
          uuid: c8de804b5ee049f29bac55ab99b165c4
          name: 'MegaRAID SAS MIB Agent Module Version'
          type: SNMP_AGENT
          snmp_oid: 'LSI-MegaRAID-SAS-MIB::agentModuleVersion.0'
          key: agentModuleVersion
          delay: '60'
          history: 365d
          trends: '0'
          value_type: TEXT
          triggers:
            -
              uuid: 185b0d25b6f4492386b5690af0a26cc8
              expression: 'nodata(/SNMP MegaRAID SAS/agentModuleVersion,5m)=1'
              name: 'No SNMP data available for MegaRAID devices for 5 min'
              priority: HIGH
        -
          uuid: ce329ab820ae4908b32ba94503e01270
          name: 'MegaRAID SAS MIB Version'
          type: SNMP_AGENT
          snmp_oid: 'LSI-MegaRAID-SAS-MIB::mibVersion.0'
          key: mibVersion
          delay: '60'
          history: 365d
          trends: '0'
          value_type: TEXT
      discovery_rules:
        -
          uuid: 162f8b5e19b54b7fb4247aa3a8cbca05
          name: 'MegaRAID SAS MIB SAS adapters'
          type: SNMP_AGENT
          snmp_oid: 'discovery[{#SNMPVALUE},LSI-MegaRAID-SAS-MIB::adapterID]'
          key: adapterID
          delay: '900'
          description: 'A List of adapter Entries containing Information/Properties about the MegaRAID related adapters on host.'
          item_prototypes:
            -
              uuid: ef7e7ef761af44b68aa6daf8c275f0b9
              name: 'MegaRAID SAS MIB Abort CC on detecting error support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::abortCConErrorSupported.{#SNMPINDEX}'
              key: 'abortCConErrorSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: |
                Abort CC on detecting error is supported on this adapter.
                Values:No(0),Yes(1)
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 487adbb185554669a387700db4c63279
              name: 'MegaRAID SAS MIB Abort Consistency Check on error Adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::abortCConError.{#SNMPINDEX}'
              key: 'abortCConError[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: |
                Abort CC on detecting error is enabled or disabled on this adapter.
                Values:No(0),Yes(1),NA(2)
            -
              uuid: 7aafd6fcfa294ba8a16e453470072a84
              name: 'MegaRAID SAS MIB Adapter $1 PCI Vendor ID'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::adapterVendorID.{#SNMPINDEX}'
              key: 'adapterVendorID[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'PCI Vendor ID for this Adapter.'
            -
              uuid: 8a3027be6da24e058d5ef00ee2121ecf
              name: 'MegaRAID SAS MIB Alarm Control Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::alarmControlSupported.{#SNMPINDEX}'
              key: 'alarmControlSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Alarm control support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 92297af8ef3d44a6bfe3fb09f028bde5
              name: 'MegaRAID SAS MIB Alarm State on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::alarmState.{#SNMPINDEX}'
              key: 'alarmState[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Alarm is enabled or disabled on this adapter. Values:disabled(0),enabled(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 32939cbc68c84528b3a49d9729b52df5
              name: 'MegaRAID SAS MIB Controller encryption support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::allowCtrlEncryption.{#SNMPINDEX}'
              key: 'allowCtrlEncryption[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'if it is set (1) supports controller encryption'
            -
              uuid: a0300e42fb2441ee8b94049aee0c012a
              name: 'MegaRAID SAS MIB Mixer Redundancy Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::allowMixedRedundancyOnArraySupported.{#SNMPINDEX}'
              key: 'allowMixedRedundancyOnArraySupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: |
                Allow different Virtual Disk on the same array to have different redundancy levels.
                Values:false(0),true(1)
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 69a526a8466941e5b2c6c2b149391eee
              name: 'MegaRAID SAS MIB Mix in Enclosure Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::allowMixInEnclosure.{#SNMPINDEX}'
              key: 'allowMixInEnclosure[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Mix InEnclosure support. Values:notSupported(0), supported(1)'
            -
              uuid: ce882123997743aea8ed67486e20bbb0
              name: 'MegaRAID SAS MIB Mix in Virtual Drive Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::allowMixInVD.{#SNMPINDEX}'
              key: 'allowMixInVD[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'MixInVIRTUALDRIVE support. Values:notSupported(0), supported(1)'
            -
              uuid: c146a5069d03476d85cc4cafc9d66e22
              name: 'MegaRAID SAS MIB Allow SSD/HDD Mix within LD on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::allowMixSSDHDDInLD.{#SNMPINDEX}'
              key: 'allowMixSSDHDDInLD[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'allow SSD/HDD mix within an LD.allow(1), not allow(0)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 402482f3e1b54928a91c57a687105586
              name: 'MegaRAID SAS MIB SATA in Cluster Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::allowSataInCluster.{#SNMPINDEX}'
              key: 'allowSataInCluster[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'SataInCluster support. Values:notSupported(0), supported(1)'
            -
              uuid: c678533092e642c88873664fb00f21d2
              name: 'MegaRAID SAS MIB Allow SAS/SATA SSD within LD on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::allowSSDMixInLD.{#SNMPINDEX}'
              key: 'allowSSDMixInLD[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'allow SAS/SATA SSD mix within an LD. allow(1), not allow(0)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: dc46ca440fd646639f9868b415910724
              name: 'MegaRAID SAS MIB Battery Backup Unit Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::bbuSupported.{#SNMPINDEX}'
              key: 'bbuSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'BBU support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 504a1c3c71ad42aca706c179b578f6e2
              name: 'MegaRAID SAS MIB Background Initialization Rate Change Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::bgiRateSupported.{#SNMPINDEX}'
              key: 'bgiRateSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Background initialization rate change support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 45b8babf36254ed0a529925072b96448
              name: 'MegaRAID SAS MIB Background Initialization Rate on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::bgiRate.{#SNMPINDEX}'
              key: 'bgiRate[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: '%'
              description: 'Background initialization rate for this adapter.'
            -
              uuid: e4d89baa22f241ab81dceec4da79d5c0
              name: 'MegaRAID SAS MIB BIOS Not Detected Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::biosNotDetected.{#SNMPINDEX}'
              key: 'biosNotDetected[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'bios Not Detected support for this Adapter. Values:false(0),true(1)'
            -
              uuid: 492367d84a134512b71c8cf3f34cce0d
              name: 'MegaRAID SAS MIB Cache Flush Interval on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::cacheFlushInterval.{#SNMPINDEX}'
              key: 'cacheFlushInterval[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: s
              description: 'Cache flush interval in seconds for this adapter.'
            -
              uuid: fedcad935c9742cd91395e1877153c8d
              name: 'MegaRAID SAS MIB Controller Cache pinned for missing or offline LDs on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::cacheIsPinned.{#SNMPINDEX}'
              key: 'cacheIsPinned[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1=controller cache is pinned for missing or offline LDs'
            -
              uuid: 2aace43207584ae596fe874cdb69a6f7
              name: 'MegaRAID SAS MIB Consistensy Check Rate Change Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::ccRateSupported.{#SNMPINDEX}'
              key: 'ccRateSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Consistency Check rate change support for this Adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: c666e2ebb91746ea8ae54bf7e52a1ecd
              name: 'MegaRAID SAS MIB Consistency Check Rate on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::ccRate.{#SNMPINDEX}'
              key: 'ccRate[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: '%'
              description: 'Consistency Check rate on this Adapter.'
            -
              uuid: d6c185c486eb433db6cec9684a2a1fcb
              name: 'MegaRAID SAS MIB Cluster State on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::clusterState.{#SNMPINDEX}'
              key: 'clusterState[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Cluster is enabled or disabled on this adapter. Values:disabled(0),enabled(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 369922d166464391946a212fee5a9ef8
              name: 'MegaRAID SAS MIB Cluster Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::clusterSupported.{#SNMPINDEX}'
              key: 'clusterSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Cluster support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: c60e8b9d3c1d41c8b40329994eb7b7c1
              name: 'MegaRAID SAS MIB Drive Capacity Coercion Mode on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::coercionMode.{#SNMPINDEX}'
              key: 'coercionMode[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Drive capacity coercion mode. 0->None;1->128MB;2->1GB'
            -
              uuid: 922d305aaea943a3b4393a4d56dfa048
              name: 'MegaRAID SAS MIB Compatibility for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::compatibilityFlag.{#SNMPINDEX}'
              key: 'compatibilityFlag[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'To inform compatibilities between Applications and FW. 0->incompatible;1->compatible'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 571f04773041447bb44fe07f0f81b755
              name: 'MegaRAID SAS MIB Compatibility info for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::compatibilityInfo.{#SNMPINDEX}'
              key: 'compatibilityInfo[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Compatibility Information. Format->(Firmware Forward compatibility flag:Firmware Backward compatibility flag:Firmware version flag:Application Forward compatibility flag:Application Backward compatibility flag:Application version flag)'
            -
              uuid: e9de4970b7224bd7ba551c17c6167123
              name: 'MegaRAID SAS MIB CopyBack state on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::copyBackState.{#SNMPINDEX}'
              key: 'copyBackState[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'CopyBack is enabled or disabled on this adapter.Values:disabled(0),enabled(1)'
            -
              uuid: 117a497e704445a78e451dc9049d4d93
              name: 'MegaRAID SAS MIB Controller SAS Addresses on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::ctrlSasAddr.{#SNMPINDEX}'
              key: 'ctrlSasAddr[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'This field gives the controller SAS address'
            -
              uuid: dcaabf504c98462faefe68b0a7939e6f
              name: 'MegaRAID SAS MIB Dedicated Hotspares Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::dedicatedHotSparesSupported.{#SNMPINDEX}'
              key: 'dedicatedHotSparesSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Dedicated HotSpares support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 4b66f220ae214a9390b7782dc6cac1ec
              name: 'MegaRAID SAS MIB adapter $1 default power saving policy'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::defaultLdPSPolicy.{#SNMPINDEX}'
              key: 'defaultLdPSPolicy[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'power saving policy.values:controller default power saving policy=0, AUTO=1, MAX=2, Max with no cache=6, NONE=255'
            -
              uuid: b14d80ee0aa64b1faf2cc9273396e68d
              name: 'MegaRAID SAS MIB Adapter $1 PCI Device ID'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::devID.{#SNMPINDEX}'
              key: 'devID[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'PCI Device ID for this Adapter.'
            -
              uuid: 9385d034306842caaaac5a52f0f34599
              name: 'MegaRAID SAS MIB Device Interface Port Addresses on Adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::devInterfacePortAddr.{#SNMPINDEX}'
              key: 'devInterfacePortAddr[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Device Port address comma delimited'
            -
              uuid: db57c9ccc7db4210b7d0f55f82058330
              name: 'MegaRAID SAS MIB Device Interface Port Count on Adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::devInterfacePortCnt.{#SNMPINDEX}'
              key: 'devInterfacePortCnt[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Device Port Count on this adapter.'
            -
              uuid: c55f8a1ea72e45c59ec75c84c71fa8ac
              name: 'MegaRAID SAS MIB Multiple Device Interface Support Values for Adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::devInterface.{#SNMPINDEX}'
              key: 'devInterface[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Multiple device interface support values separated by space.'
            -
              uuid: e2ad25cfd65944a29f8915b3979d2527
              name: 'MegaRAID SAS MIB Large IO Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::disableLargeIO.{#SNMPINDEX}'
              key: 'disableLargeIO[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '0=Large IO is supported, 1=Large IO is unsupported'
            -
              uuid: ca188b202c6747568d153c3b0a85c15f
              name: 'MegaRAID SAS MIB Interval for disabling power saving after power saving time on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::disableLdPSInterval.{#SNMPINDEX}'
              key: 'disableLdPSInterval[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: h
              description: 'LD power savings are disabled for yy hours beginning at disableLdPSTime.'
            -
              uuid: e5f2a99a706645c58f35c8a62c673e4f
              name: 'MegaRAID SAS MIB Logical Drive Power Saving disable time after 12:00AM on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::disableLdPSTime.{#SNMPINDEX}'
              key: 'disableLdPSTime[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: m
              description: 'LD power savings shall be disabled at xx minutes from 12:00am.'
            -
              uuid: 8a6280257f494b6c823eea7a2d836efd
              name: 'MegaRAID SAS MIB Spin Down Hotspares on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::disableSpinDownHotSpare.{#SNMPINDEX}'
              key: 'disableSpinDownHotSpare[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Spin Down Hotspares(0), Do Not Spin Down Hotspares(1)'
            -
              uuid: 7028317c998548149fe98322567b2a84
              name: 'MegaRAID SAS MIB Domain ID of adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::domainId.{#SNMPINDEX}'
              key: 'domainId[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'This field gives the Domain ID'
            -
              uuid: 3e3ee63d6eb0467fa4ca7026f4007d53
              name: 'MegaRAID SAS MIB Driver Version for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::driverVersion.{#SNMPINDEX}'
              key: 'driverVersion[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Driver version Format->(Driver Name:Version)'
            -
              uuid: d10981c76af3479485da5d5fd7d25b99
              name: 'MegaRAID SAS MIB Enable SAS Pi on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::enablePI.{#SNMPINDEX}'
              key: 'enablePI[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1 =Enable SAS PI for controller , 0 =Disable SAS PI for controller'
            -
              uuid: c4de709c6d274b238eb01e0e26ab05f5
              name: 'MegaRAID SAS MIB Spin Down Unconfigured Drives on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::enableSpinDownUnconfigured.{#SNMPINDEX}'
              key: 'enableSpinDownUnconfigured[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Spin Down Unconfigured Drives(1), Do Not Spin Down Unconfigured Drives(0)'
            -
              uuid: 72bed8c4ffc94a1fbbfbc66e1713c62a
              name: 'MegaRAID SAS MIB Expander Firmware Version for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::expanderFirmwareVersion.{#SNMPINDEX}'
              key: 'expanderFirmwareVersion[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Expander firmware version - Not Available if expander is not present on the controller'
            -
              uuid: 9442127ffd104d3ba979af946e52c779
              name: 'MegaRAID SAS MIB Firmware Version for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::firmwareVersion.{#SNMPINDEX}'
              key: 'firmwareVersion[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Firmware version Format->(Firmware Package Version:Version:Date:Time)'
            -
              uuid: e446c75c2bcb485ea305bfd223b4b0c4
              name: 'MegaRAID SAS MIB Flash size on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::flashSize.{#SNMPINDEX}'
              key: 'flashSize[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: B
              description: 'Flash size in MB for this adapter.'
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '1048576'
            -
              uuid: 4f50e093e036460e9ae7cf6321c2ba90
              name: 'MegaRAID SAS MIB Physical Drive force Offline Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::forceOffline.{#SNMPINDEX}'
              key: 'forceOffline[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Physical drive force Offline operation support. Values:notSupported(0), supported(1)'
            -
              uuid: dd9fc6e1d060407aa6e9cbba3b5038ea
              name: 'MegaRAID SAS MIB Physical Drive force Online Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::forceOnline.{#SNMPINDEX}'
              key: 'forceOnline[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Physical drive force Online operation support. Values:notSupported(0), supported(1)'
            -
              uuid: 2303720d12f0442da5d91eae03096004
              name: 'MegaRAID SAS MIB Physical Drive force Rebuild Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::forceRebuild.{#SNMPINDEX}'
              key: 'forceRebuild[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Physical drive force Rebuild operation support. Values:notSupported(0), supported(1)'
            -
              uuid: f54dfe964f3f40759cc6c03270d1a15b
              name: 'MegaRAID SAS MIB Foreign Import Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::foreignConfigImportSupported.{#SNMPINDEX}'
              key: 'foreignConfigImportSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Support foreign config import on this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 1eea79767efd48b69ef85e010facc4a9
              name: 'MegaRAID SAS MIB Host Interface Port Address for Adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::hostInterfacePortAddr.{#SNMPINDEX}'
              key: 'hostInterfacePortAddr[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Port address comma delimited'
            -
              uuid: 427fc1c2b701460e8e9ac5a041be2fc3
              name: 'MegaRAID SAS MIB Host Interface Port Count for Adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::hostInterfacePortCnt.{#SNMPINDEX}'
              key: 'hostInterfacePortCnt[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Port Count on this adapter.'
            -
              uuid: 1a317e7d52c7479d975ecfe59da958da
              name: 'MegaRAID SAS MIB Host Interface for Adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::hostInterface.{#SNMPINDEX}'
              key: 'hostInterface[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: |
                Host interface information for this adapter.
                Values:N/A(0),PCIX(1),PCIE(2),iSCSI(3),SAS-3G(4)
            -
              uuid: b161c1ec999e40f39eac230af7501765
              name: 'MegaRAID SAS MIB Incompatibility details for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::incompatibilityDetails.{#SNMPINDEX}'
              key: 'incompatibilityDetails[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'This field gives the Incompatibility Details'
            -
              uuid: f2b2dd61c2ec43919beab96a0cf0b2dd
              name: 'MegaRAID SAS MIB Interrupt throttle active count on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::intThrottleCount.{#SNMPINDEX}'
              key: 'intThrottleCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Interrupt throttle active count on this adapter.'
            -
              uuid: 93f17b2b6a5b45f8862d5ac7b7888a57
              name: 'MegaRAID SAS MIB Interrupt throttle completion hold time on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::intThrottleTimeUs.{#SNMPINDEX}'
              key: 'intThrottleTimeUs[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: s
              description: 'Interrupt throttle completion hold time on this adapter.'
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '1000000'
            -
              uuid: 8b44394fa2a747a8a0f6bd4b4246a9fc
              name: 'MegaRAID SAS MIB Bad Block Management State on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::ldbbm.{#SNMPINDEX}'
              key: 'ldbbm[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1=LD bad block management is enabled, 0=LD bad block management is not enabled'
            -
              uuid: 7a138f8bb3fe481b9b04b9436d1275fc
              name: 'MegaRAID SAS MIB Lock Key Assigned Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::lockKeyAssigned.{#SNMPINDEX}'
              key: 'lockKeyAssigned[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Lock key Assigned support for this Adapter. Values:false(0),true(1)'
            -
              uuid: d0e9ba57066f4ee68fb73f740c929d66
              name: 'MegaRAID SAS MIB Type of lock key binding for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::lockKeyBinding.{#SNMPINDEX}'
              key: 'lockKeyBinding[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Type of lock key binding. lock key is not bound(0),lock key bound to FW secret key(1), lock key bound to user(2), lock key bound to a TPM(3)'
            -
              uuid: a18b175162524995b0e7984c340564ed
              name: 'MegaRAID SAS MIB Lock Key Failed Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::lockKeyFailed.{#SNMPINDEX}'
              key: 'lockKeyFailed[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'lock Key Failed support for this Adapter. Values:false(0),true(1)'
            -
              uuid: 64105d7be0be41d7bb02e94158fbfbff
              name: 'MegaRAID SAS MIB Lock Key Not BackedUp Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::lockKeyNotBackedup.{#SNMPINDEX}'
              key: 'lockKeyNotBackedup[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'lock Key Not Backedup support for this Adapter. Values:false(0),true(1)'
            -
              uuid: 996ffce77f8d4c219f61bb3f4894e639
              name: 'MegaRAID SAS MIB Firmware support for Maintenance Mode on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maintenanceMode.{#SNMPINDEX}'
              key: 'maintenanceMode[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: '1=FW supports maintenance mode'
            -
              uuid: 3a6c7814ec31422498e65c47788b3912
              name: 'MegaRAID SAS MIB Maximum arms per Virtual Drive supported for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxArms.{#SNMPINDEX}'
              key: 'maxArms[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Maximum arms per Virtual Drive supported for this Adapter.'
            -
              uuid: 13b52e889ccf49e2bce4ae204be73d35
              name: 'MegaRAID SAS MIB Maximum no of arrays supported for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxArrays.{#SNMPINDEX}'
              key: 'maxArrays[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Maximum no of arrays supported for this adapter.'
            -
              uuid: 3c88f87cd1bd48fb94883808e662b66d
              name: 'MegaRAID SAS MIB Maximum Parallel Commands Supported on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxConcurrentCmds.{#SNMPINDEX}'
              key: 'maxConcurrentCmds[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'The maximum parallel commands supported on this adapter.'
            -
              uuid: ec193c3592be45fbbb3f9da44fc1f2e6
              name: 'MegaRAID SAS MIB Maximum number of drives to spinup within 60 sec for direct attached drives for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxDAPdCountSpinup60.{#SNMPINDEX}'
              key: 'maxDAPdCountSpinup60[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Maximum number of drives to spinup within 60 sec for direct attached drives'
            -
              uuid: b989adcf2c59423999e9b7fd6da4b23c
              name: 'MegaRAID SAS MIB Maximum Configurable SSC Size on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maximumCacheSize.{#SNMPINDEX}'
              key: 'maximumCacheSize[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: B
              description: 'This field give the information about maximum Size of SSC that can yet be configured,in GB'
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '1073741824'
            -
              uuid: 90fb5bce3e56464c99c60024f6835745
              name: 'MegaRAID SAS MIB Maximum no of HA nodes supported by FW on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maximumControllerNodes.{#SNMPINDEX}'
              key: 'maximumControllerNodes[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'This field gives the HA nodes this FW supports'
            -
              uuid: 301edfe9da06474b9d00e75d721a3d4d
              name: 'MegaRAID SAS MIB Maximum Logical Drives per Array on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxLdsPerArray.{#SNMPINDEX}'
              key: 'maxLdsPerArray[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Max Ld''s per array in adapter'
            -
              uuid: 26387eb9f4dd48c9bd517762d6bbaea5
              name: 'MegaRAID SAS MIB Maximum Data Transfer Size on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxRequestSize.{#SNMPINDEX}'
              key: 'maxRequestSize[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: sectors
              description: 'The maximum data transfer size in sectors, on this adapter.'
            -
              uuid: b603fddb65934b8ea1857a5ced8e4ba2
              name: 'MegaRAID SAS MIB maximum Scatter Gather Element count allowed on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxSGECount.{#SNMPINDEX}'
              key: 'maxSGECount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'The maximum Scatter Gather Element count allowed on this adapter.'
            -
              uuid: eeae4f5e04e14e85af9de81ac8e1a1cb
              name: 'MegaRAID SAS MIB Maximum spans per Virtual Drive supported for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxSpans.{#SNMPINDEX}'
              key: 'maxSpans[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Maximum spans per Virtual Drive supported for this Adapter.'
            -
              uuid: 8cf75a2ab6f148b5abf57f694dc5d3ba
              name: 'MegaRAID SAS MIB Maximum no of Virtual Drives supported for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::maxVDs.{#SNMPINDEX}'
              key: 'maxVDs[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Maximum number of Virtual Drives supported for this adapter.'
            -
              uuid: f9268db58e58425c89e35ebb6a484639
              name: 'MegaRAID SAS MIB Memory size on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::memorySize.{#SNMPINDEX}'
              key: 'memorySize[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: B
              description: 'Memory size in MB for this adapter.'
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '1048576'
            -
              uuid: 34de94532fb846bc94a99752346776f0
              name: 'MegaRAID SAS MIB Multipath Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::multipathSupport.{#SNMPINDEX}'
              key: 'multipathSupport[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Multipath is supported or not supported on this adapter.Values:not supported(0),supported(1)'
            -
              uuid: a770d313433c47bfaea5b4af8215342e
              name: 'MegaRAID SAS MIB NVRAM size on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::nvramSize.{#SNMPINDEX}'
              key: 'nvramSize[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: B
              description: 'NVRAM size in KB for this adapter.'
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '1024'
            -
              uuid: 9b73fec5258e4db8872b13d0439559ef
              name: 'MegaRAID SAS MIB Maximum Logical Drives per Array in configuration on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::partitionsInDDF.{#SNMPINDEX}'
              key: 'partitionsInDDF[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Max LD''s per Array in configuration'
            -
              uuid: ebf25d87760545a0b5d2f27e232e11fb
              name: 'MegaRAID SAS MIB Patrol Read Rate Change Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::patrolRateSupported.{#SNMPINDEX}'
              key: 'patrolRateSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Patrol read rate change support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 9c6c1161452d4c419ae97e9ccec6e21f
              name: 'MegaRAID SAS MIB Patrol Read Rate on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::patrolReadRate.{#SNMPINDEX}'
              key: 'patrolReadRate[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: '%'
              description: 'Patrol Read Rate for this adapter.'
            -
              uuid: 625e93b386e040788731e5e76d6622ef
              name: 'MegaRAID SAS MIB Failed Physical Disk Devices on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::pdDiskFailedCount.{#SNMPINDEX}'
              key: 'pdDiskFailedCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Number of disk devices in this adapter that are failed'
              trigger_prototypes:
                -
                  uuid: 6321667794fa421781c2cbcfab948058
                  expression: 'last(/SNMP MegaRAID SAS/pdDiskFailedCount[{#SNMPVALUE}])>0'
                  name: 'Failed disks detected on MegaRAID adapter {#SNMPVALUE}'
                  priority: HIGH
            -
              uuid: 0a061b6d34de46ce8605e2d6ae848f76
              name: 'MegaRAID SAS MIB Physical Disk Devices with pre-fail state on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::pdDiskPredFailureCount.{#SNMPINDEX}'
              key: 'pdDiskPredFailureCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Number of disk devices in this adapter that are critical'
              trigger_prototypes:
                -
                  uuid: 01ed680e465043f782ecbc3f592e1382
                  expression: 'last(/SNMP MegaRAID SAS/pdDiskPredFailureCount[{#SNMPVALUE}])>0'
                  name: 'Disks with pre-fail state detected on MegaRAID adapter {#SNMPVALUE}'
                  priority: HIGH
            -
              uuid: 53e9221dba0f441eaa5fe7e3e35185a2
              name: 'MegaRAID SAS MIB Physical Disk Devices in adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::pdDiskPresentCount.{#SNMPINDEX}'
              key: 'pdDiskPresentCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Physical disk devices present in this adapter.'
            -
              uuid: 90cf5024e0074e92b2348983ed42a56d
              name: 'MegaRAID SAS MIB Physical Devices in adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::pdPresentCount.{#SNMPINDEX}'
              key: 'pdPresentCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Physical devices present in this adapter.'
            -
              uuid: 3ae691fc1c674519895577dd2dc1d462
              name: 'MegaRAID SAS MIB Peer Controller Status on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::peerControllerStatus.{#SNMPINDEX}'
              key: 'peerControllerStatus[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'This field gives the Peer controller Status'
            -
              uuid: 6de48788b0724b8fb646d90b84ac6404
              name: 'MegaRAID SAS MIB Predictive Fail Poll Interval on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::predFailPollInterval.{#SNMPINDEX}'
              key: 'predFailPollInterval[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: s
              description: 'Number of seconds between precdictive fail polls on this adapter.'
            -
              uuid: 8f23d62904a7451abbde5857085ee56b
              name: 'MegaRAID SAS MIB Prevent import of SAS Pi protected LD on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::preventPIImport.{#SNMPINDEX}'
              key: 'preventPIImport[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              description: '1=Prevent import of SAS PI protected logical disks , 0=Not Prevent import of SAS PI protected logical disks'
            -
              uuid: a7707863dbbd4ea5bc7ef668ca72b403
              name: 'MegaRAID SAS MIB Adapter $1 Product Name'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::productName.{#SNMPINDEX}'
              key: 'productName[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Product name e.g. MegaRAID SAS-8E, MegaRAID SAS-4X, etc.'
            -
              uuid: 8a95b8679c754accb9ea460277182e28
              name: 'MegaRAID SAS MIB Rebuilding Rate Change Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::rbldRateSupported.{#SNMPINDEX}'
              key: 'rbldRateSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Rebuilding rate change support for this Adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: edba09866d1b45e19315583e77e2efc4
              name: 'MegaRAID SAS MIB Reconstruction Rate Change Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::reconRateSupported.{#SNMPINDEX}'
              key: 'reconRateSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Reconstruction rate change support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 1ee9e0c4f3ea46e0b23c191496bd2691
              name: 'MegaRAID SAS MIB Reconstruction Rate on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::reconstructionRate.{#SNMPINDEX}'
              key: 'reconstructionRate[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: '%'
              description: 'Reconstruction rate on this Adapter.'
            -
              uuid: 0c6fb19dfeb84dda941bdcbb7fc26675
              name: 'MegaRAID SAS MIB Revertible Hotspares Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::revertibleHotSparesSupported.{#SNMPINDEX}'
              key: 'revertibleHotSparesSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Revertible HotSpares support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 3006d2089661489daa8708725789c6f2
              name: 'MegaRAID SAS MIB Board Revision ID for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::revisionIdentifier.{#SNMPINDEX}'
              key: 'revisionIdentifier[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Board revision ID for this Adapter.'
            -
              uuid: 3e409e1b9d5f43cf8cafa26585f76740
              name: 'MegaRAID SAS MIB Security Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::securitySupported.{#SNMPINDEX}'
              key: 'securitySupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Displays the security support. if supported (1) , not supported (0)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 84bf1059179d4a2ba463e8861b6d5b82
              name: 'MegaRAID SAS MIB Self Diagnostic Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::selfDiagnosticSupported.{#SNMPINDEX}'
              key: 'selfDiagnosticSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Controller supports self diagnostic. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 2b9f8abe57c74e1fa1b8e7ef6645e636
              name: 'MegaRAID SAS MIB Adapter $1 Controller Serial Number'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::serialNo.{#SNMPINDEX}'
              key: 'serialNo[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'Controller serial number'
            -
              uuid: 0cd9246ce1444e7daa68b9773f6445db
              name: 'MegaRAID SAS MIB FW requires application to set up power state before conf change on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::setPowerStateForCfg.{#SNMPINDEX}'
              key: 'setPowerStateForCfg[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'FW requires application to set power state before configuration changes. Required(1), Not Required(0)'
            -
              uuid: 478bbdecc5ef4c29a30755edb861cbd4
              name: 'MegaRAID SAS MIB Spanning Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::spanningAllowedSupported.{#SNMPINDEX}'
              key: 'spanningAllowedSupported[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Spanning support for this adapter. Values:false(0),true(1)'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: bda05bbda707435796cc060a4673b60c
              name: 'MegaRAID SAS MIB Spin Down Time on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::spinDownTime.{#SNMPINDEX}'
              key: 'spinDownTime[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: m
              description: 'SpinDownTime in minutes'
            -
              uuid: 0045595f65c348eebc2aabc17b9cb4c4
              name: 'MegaRAID SAS MIB Delay among spinup groups for this adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::spinupDelay.{#SNMPINDEX}'
              key: 'spinupDelay[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: s
              description: 'Number of seconds to delay among spinup groups for this adapter.'
            -
              uuid: adf7336fd8a145d3ba7db011903ccf43
              name: 'MegaRAID SAS MIB Maximum number of drives to spin up at one time for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::spinupDriveCount.{#SNMPINDEX}'
              key: 'spinupDriveCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Maximum number of drives to spin up at one time for this adapter.'
            -
              uuid: b8f97311c17b4512abda666ac5228e3e
              name: 'MegaRAID SAS MIB Delay Betwen Drive Spin Up in Enclosure on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::spinupEnclDelay.{#SNMPINDEX}'
              key: 'spinupEnclDelay[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: s
              description: 'Delay between drive spin up for drives within an enclosure'
            -
              uuid: 5a841d1df81c48a4a76bba4e3a4e794c
              name: 'MegaRAID SAS MIB Maximum Drives to Spin Up in Enclosure on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::spinupEnclDriveCount.{#SNMPINDEX}'
              key: 'spinupEnclDriveCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: m
              description: 'Maximum number of drives that can be spin up in an enclosure'
            -
              uuid: 034f4527ff644483b4b73f7ac58e31fc
              name: 'MegaRAID SAS MIB Copy back on SSD on SMART error on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::ssdSMARTerEnabled.{#SNMPINDEX}'
              key: 'ssdSMARTerEnabled[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Copyback to SSD on SMART error. Values Enabled(0),Disabled(1)'
            -
              uuid: 231a24e726c546b5bb7bc2d8968299ea
              name: 'MegaRAID SAS MIB Adapter $1 PCI Sub-Device ID'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::subDevID.{#SNMPINDEX}'
              key: 'subDevID[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'PCI Sub-Device ID for this adapter.'
            -
              uuid: 0b26fa12e0b3407fbfda5306635fca1b
              name: 'MegaRAID SAS MIB Adapter $1 PCI Sub-Vendor ID'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::subVendorID.{#SNMPINDEX}'
              key: 'subVendorID[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'PCI Sub-Vendor ID for this adapter.'
            -
              uuid: 958c7ccf9c1144489f1fdb66504f892f
              name: 'MegaRAID SAS MIB Break Mirror Operation Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportBreakMirror.{#SNMPINDEX}'
              key: 'supportBreakMirror[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1=Support break mirror operation,0=Do not Support break mirror operation'
            -
              uuid: 6d0f04592a314adcb86df5286bd8c498
              name: 'MegaRAID SAS MIB Configuration Auto Balance Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportConfigAutoBalance.{#SNMPINDEX}'
              key: 'supportConfigAutoBalance[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '0=no configuration auto balance support, 1=configuration auto balance support is present'
            -
              uuid: efecca0e3a7f464f9b0963e2db349e8f
              name: 'MegaRAID SAS MIB Access Policy Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportedAccessPolicy.{#SNMPINDEX}'
              key: 'supportedAccessPolicy[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Access policy support. Values: false(0), true(1)'
            -
              uuid: a8b9535109ea461b93e63755faa46520
              name: 'MegaRAID SAS MIB IO Policy Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportedIOPolicy.{#SNMPINDEX}'
              key: 'supportedIOPolicy[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'IO policy support. Values: false(0), true(1)'
            -
              uuid: 684cf31585684c60a5eef9e54d8359c3
              name: 'MegaRAID SAS MIB Maximum Stripe Size Supported on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportedMaxSize.{#SNMPINDEX}'
              key: 'supportedMaxSize[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Maximum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc'
            -
              uuid: 9900a10a418541c49757a30275eb9a42
              name: 'MegaRAID SAS MIB Minimum Stripe Size Supported on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportedMinSize.{#SNMPINDEX}'
              key: 'supportedMinSize[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Minimum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc'
            -
              uuid: c6ec3fe3723c4c82a494913d64210efd
              name: 'MegaRAID SAS MIB Read Policy Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportedReadPolicy.{#SNMPINDEX}'
              key: 'supportedReadPolicy[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Read policy support. Values: false(0), true(1)'
            -
              uuid: 318002da2c5c49feabaddf1d2ee57849
              name: 'MegaRAID SAS MIB FastPath WriteBack Support on Raptor LD for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportFastPathWB.{#SNMPINDEX}'
              key: 'supportFastPathWB[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1=Support Fast Path WB on Raptor Type Ld, 0=Does not support Fast Path WB on Raptor Type Ld'
            -
              uuid: 76846701eab74893a4151c29814105d4
              name: 'MegaRAID SAS MIB Online Firmware Update Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportOnlineFWUpdate.{#SNMPINDEX}'
              key: 'supportOnlineFWUpdate[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1=Online firmware update is supported, 0=Online firmware update is not supported'
            -
              uuid: 9bab16e04f924459996e83c0978a0258
              name: 'MegaRAID SAS MIB PI Support for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportPIcontroller.{#SNMPINDEX}'
              key: 'supportPIcontroller[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Displays the support PI. 1=LD SAS PI Type 0, 0=LD Not SAS PI Type 0'
              preprocessing:
                -
                  type: BOOL_TO_DECIMAL
                  parameters:
                    - ''
            -
              uuid: 809e873ec1e84bd0990879dbc779bd94
              name: 'MegaRAID SAS MIB PD shield state support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportShieldState.{#SNMPINDEX}'
              key: 'supportShieldState[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1=Support PD shield state, 0=Not Support PD shield state'
            -
              uuid: 5d6e4810d15740f492373e35a33f714f
              name: 'MegaRAID SAS MIB SAS Drive Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportsSAS.{#SNMPINDEX}'
              key: 'supportsSAS[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'SAS physical drive support. Values:notSupported(0), supported(1)'
            -
              uuid: 1ad4a7ce6dda464182b1f05a541d02e2
              name: 'MegaRAID SAS MIB SATA Drive Support on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::supportsSATA.{#SNMPINDEX}'
              key: 'supportsSATA[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'SATA physical drive support. Values:notSupported(0), supported(1)'
            -
              uuid: cde7d9340c8349c4a1c8e9e7bae03879
              name: 'MegaRAID SAS MIB Controller Temperature on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::temperatureCtrl.{#SNMPINDEX}'
              key: 'temperatureCtrl[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: °C
              description: 'temperature of controller in Celsius'
            -
              uuid: 89daa94c59684f18881216490fc73beb
              name: 'MegaRAID SAS MIB Raid On Chip Temperature on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::temperatureROC.{#SNMPINDEX}'
              key: 'temperatureROC[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: °C
              description: 'temperature of RAID On Chip in Celsius'
              trigger_prototypes:
                -
                  uuid: a981f35ffcbf4ec3915cc859ca012ec3
                  expression: 'last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>115'
                  recovery_mode: RECOVERY_EXPRESSION
                  recovery_expression: 'last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<105'
                  name: 'Critical temperature on Raid on Chip for adapter {#SNMPVALUE}'
                  priority: HIGH
                -
                  uuid: db33899d04594522af08c9edf8e226c9
                  expression: 'last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>90'
                  recovery_mode: RECOVERY_EXPRESSION
                  recovery_expression: 'last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<80'
                  name: 'High temperature on Raid on Chip for adapter {#SNMPVALUE}'
                  priority: AVERAGE
            -
              uuid: eddae321bf684be5832305b77cd2b37c
              name: 'MegaRAID SAS MIB Topology Types info for adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::topologyType.{#SNMPINDEX}'
              key: 'topologyType[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'This field gives the Topology Type'
            -
              uuid: 7b3b24d6a2cc41cc9994de952c31c8ba
              name: 'MegaRAID SAS MIB Currently Confugured Total Cache Size on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::totalCacheSize.{#SNMPINDEX}'
              key: 'totalCacheSize[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              units: B
              description: 'This field give the information about total Size of currently configured SSC,in GB'
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '1073741824'
            -
              uuid: 0d93e5c4eb1948f2b2d802c62d6396e5
              name: 'MegaRAID SAS MIB Total Space used for MetaData on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::totalSpaceformetadata.{#SNMPINDEX}'
              key: 'totalSpaceformetadata[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Total Space used for MetaData'
            -
              uuid: 4a8155dccabe4637ba2c897e687a1a8b
              name: 'MegaRAID SAS MIB Use Emergency Spares for SMARTer on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::useEmergencySparesforSMARTer.{#SNMPINDEX}'
              key: 'useEmergencySparesforSMARTer[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1 =Use Emergency spares for SMARTer ,0 =Not Use Emergency spares for SMARTer'
            -
              uuid: e52b500ac6d649ba8199a35ff3a957da
              name: 'MegaRAID SAS MIB Emergency Spare Drive possible drive on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::useEmergencySpare.{#SNMPINDEX}'
              key: 'useEmergencySpare[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              trends: '0'
              value_type: TEXT
              description: 'This field give the information about Emergency Spare possible Drive types(Uncongiured Good/Global Hotspare)'
            -
              uuid: 279e5409558042a398d5429b42de9478
              name: 'MegaRAID SAS MIB Degraded Virtual Devices in adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::vdDegradedCount.{#SNMPINDEX}'
              key: 'vdDegradedCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Number of virtual  devices in this adapter that are critical'
              trigger_prototypes:
                -
                  uuid: 76ed072a802f4c17aadca3f52338c8be
                  expression: 'last(/SNMP MegaRAID SAS/vdDegradedCount[{#SNMPVALUE}])>0'
                  name: 'Degraded Virtual devices on MegaRAID adapter {#SNMPVALUE}'
                  priority: HIGH
            -
              uuid: 1ce6d496bf8c4bfb93475608521e2173
              name: 'MegaRAID SAS MIB Offline Virtual Devices in adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::vdOfflineCount.{#SNMPINDEX}'
              key: 'vdOfflineCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Number of virtual devices in this adapter that are offline'
              trigger_prototypes:
                -
                  uuid: a06eddff4a634f18ae9c1a1efaa00493
                  expression: 'last(/SNMP MegaRAID SAS/vdOfflineCount[{#SNMPVALUE}])>0'
                  name: 'Offline Virtual devices on MegaRAID adapter {#SNMPVALUE}'
                  priority: HIGH
            -
              uuid: f5e92d3a9eb04959b85f41d5d25bcce1
              name: 'MegaRAID SAS MIB Virtual Devices in adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::vdPresentCount.{#SNMPINDEX}'
              key: 'vdPresentCount[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: 'Virtual devices present in this adapter.'
            -
              uuid: 6111adba53854c01aca08e711436af64
              name: 'MegaRAID SAS MIB SSC Support Write Caching IO''s on adapter $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::writeCacheCapable.{#SNMPINDEX}'
              key: 'writeCacheCapable[{#SNMPVALUE}]'
              delay: '60'
              history: 30d
              description: '1=SSC support write caching IOs, 0=SSC not support write caching IOs'
          graph_prototypes:
            -
              uuid: cddb4bd752f24c069df7463e22864c18
              name: 'Temperatures on MegaRAID adapter {#SNMPVALUE}'
              graph_items:
                -
                  color: 0000FF
                  item:
                    host: 'SNMP MegaRAID SAS'
                    key: 'temperatureCtrl[{#SNMPVALUE}]'
                -
                  sortorder: '1'
                  color: FF00FF
                  item:
                    host: 'SNMP MegaRAID SAS'
                    key: 'temperatureROC[{#SNMPVALUE}]'
        -
          uuid: 712d4e6fd1d745e9b8ab20cf90bbdef8
          name: 'MegaRAID SAS MIB SAS devices'
          type: SNMP_AGENT
          snmp_oid: 'discovery[{#SNMPVALUE},LSI-MegaRAID-SAS-MIB::physDevID]'
          key: physDevID
          delay: '60'
          description: 'A List of device Entries containing Information/Properties about the MegaRAID related devices on host.'
          item_prototypes:
            -
              uuid: 51283954041e436dbd2f5e3b781ccfce
              name: 'MegaRAID SAS MIB Device $1 Adapter Port(s) to which it is connected'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::connectedAdapterPort.{#SNMPINDEX}'
              key: 'connectedAdapterPort[{#SNMPVALUE}]'
              delay: '60'
              trends: '0'
              value_type: TEXT
              description: 'Adapter port(s) to which the device is connected.'
            -
              uuid: e7feea1b656c4eca8b2003c4b9a5a90e
              name: 'MegaRAID SAS MIB Maximum Supported Speed for Device $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::deviceSpeed.{#SNMPINDEX}'
              key: 'deviceSpeed[{#SNMPVALUE}]'
              delay: '60'
              description: 'Maximum supported speed. Values:speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)'
            -
              uuid: a55f9f6823f04b9ea3db300f11559c58
              name: 'MegaRAID SAS MIB Device $1 Ready for Removal'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::disabledForRemoval.{#SNMPINDEX}'
              key: 'disabledForRemoval[{#SNMPVALUE}]'
              delay: '60'
              description: 'If true, drive is ready for removal. Values:false(0),true(1)'
            -
              uuid: 48c54f856a62457f97e03696092a94ec
              name: 'MegaRAID SAS MIB Negotiated Link Speed for Device $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::linkSpeed.{#SNMPINDEX}'
              key: 'linkSpeed[{#SNMPVALUE}]'
              delay: '60'
              description: 'Negotiated link speed. Values:speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)'
              trigger_prototypes:
                -
                  uuid: 712fb7cad9f34ceaa151bcec68405a89
                  expression: 'last(/SNMP MegaRAID SAS/linkSpeed[{#SNMPVALUE}])=0'
                  name: 'Unknown Negotiated Link Speed for MegaRAID Drive {#SNMPVALUE}'
                  priority: HIGH
            -
              uuid: 7cf6c61db6714c4ca3f3fe0176cffa3d
              name: 'MegaRAID SAS MIB Media Error Count of Device $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::mediaErrCount.{#SNMPINDEX}'
              key: 'mediaErrCount[{#SNMPVALUE}]'
              delay: '60'
              description: 'Error count of the device'
            -
              uuid: d3390bc4afc44220a44ff15ec2fdf121
              name: 'MegaRAID SAS MIB Device $1 Certtified by OEM'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::oemCertified.{#SNMPINDEX}'
              key: 'oemCertified[{#SNMPVALUE}]'
              delay: '60'
              description: 'Is the drive certified by the OEM (OEM-specific checks). Values:notCertified(1), Certified(0)'
              trigger_prototypes:
                -
                  uuid: 7f0193a29e1544959333efa0cf6565f0
                  expression: 'last(/SNMP MegaRAID SAS/oemCertified[{#SNMPVALUE}])=0'
                  name: 'MegaRAID Device {#SNMPVALUE} not certified by OEM'
                  priority: AVERAGE
                  manual_close: 'YES'
            -
              uuid: 0cef4ae580b140008e1550b5e70b106f
              name: 'MegaRAID SAS MIB Device $1 Supported by OEM'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::oemSupported.{#SNMPINDEX}'
              key: 'oemSupported[{#SNMPVALUE}]'
              delay: '60'
              description: 'Is the drive supported by the OEM (OEM-specific checks). Values:notSupported(1), supported(0)'
            -
              uuid: 1621086bc79b49d280e3d6bea1f51a00
              name: 'MegaRAID SAS MIB Operation progress for Device $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::operationProgress.{#SNMPINDEX}'
              key: 'operationProgress[{#SNMPVALUE}]'
              delay: '60'
              trends: '0'
              value_type: TEXT
              description: 'Operation progress in %. e.g. Rebuild progress is 10%'
            -
              uuid: 68060cd490324de28b9cefb77c16bdcc
              name: 'MegaRAID SAS MIB Other Error Count of Device $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::otherErrCount.{#SNMPINDEX}'
              key: 'otherErrCount[{#SNMPVALUE}]'
              delay: '60'
              description: 'Error count of the device'
            -
              uuid: cb6ab4710cee4235866fe0782e366d66
              name: 'MegaRAID SAS MIB Firmware Interpretation of state of Device $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::pdState.{#SNMPINDEX}'
              key: 'pdState[{#SNMPVALUE}]'
              delay: '60'
              description: |
                Firmware's interpretation of drive state.
                Values:unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64),UNCONFIGURED-SHIELDED(128),HOTSPARE-SHIELDED(130),CONFIGURED-SHIELDED(144)
              trigger_prototypes:
                -
                  uuid: 37d40d8a0bb546b5a507269e3218e9f7
                  expression: 'last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=17'
                  name: 'Failed state for MegaRAID Drive {#SNMPVALUE}'
                  priority: HIGH
                -
                  uuid: 1c98f4abd39f4c0f8eb8abe1e657b3ea
                  expression: 'last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=20'
                  name: 'Rebuilding state for MegaRAID Drive {#SNMPVALUE}'
                  priority: WARNING
                -
                  uuid: cfb17f977b3f46dfa3ef8d77fa37efa0
                  expression: 'last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=1'
                  name: 'Unconfigured Bad state for MegaRAID Drive {#SNMPVALUE}'
                  priority: HIGH
            -
              uuid: 85208a0e77e24a5498212f163a132021
              name: 'MegaRAID SAS MIB Device $1 Temperature'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::pdTemperature.{#SNMPINDEX}'
              key: 'pdTemperature[{#SNMPVALUE}]'
              delay: '60'
              units: °C
              description: 'Physical Drive temperature in Celsius'
              trigger_prototypes:
                -
                  uuid: c8b389cd3dc94fe4982f41ae3f4bea8c
                  expression: 'last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])>50'
                  recovery_mode: RECOVERY_EXPRESSION
                  recovery_expression: 'last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])<47'
                  name: 'MegaRAID Device {#SNMPVALUE} Temperature too high'
                  priority: HIGH
            -
              uuid: 7cbd7877921b4c62993631d7f5213153
              name: 'MegaRAID SAS MIB Predictive Fail Count of Device $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::predFailCount.{#SNMPINDEX}'
              key: 'predFailCount[{#SNMPVALUE}]'
              delay: '60'
              description: 'Predictive fail count of the device'
            -
              uuid: 9e021f58f73d4bf38f6b1dc7c44060ac
              name: 'MegaRAID SAS MIB Type of Device $1'
              type: SNMP_AGENT
              snmp_oid: 'LSI-MegaRAID-SAS-MIB::scsiDevType.{#SNMPINDEX}'
              key: 'scsiDevType[{#SNMPVALUE}]'
              delay: '60'
              description: |
                Type of this Device.
                Values:disk(0),tape(1),printer(2),processor(3),cdrom(5),scanner(6),optical(7),enclosure(13),dvd(10),unknown(31)
          graph_prototypes:
            -
              uuid: def97b1560d04fc49b736ec955293c6b
              name: 'MegaRAID Physical Device {#SNMPVALUE} Temperature'
              graph_items:
                -
                  color: 0000CC
                  item:
                    host: 'SNMP MegaRAID SAS'
                    key: 'pdTemperature[{#SNMPVALUE}]'