Release Notes for STM32CubeMP13 Firmware Projects
Copyright © 2023 STMicroelectronics
Purpose
The projects are a set of applicative tasks that aim to explain and provide use cases of the different products features based on the products hardware (Boards, STM32 Core(s) features, interconnections and peripherals) and built around the different firmware components. They can be directly used or adapted by the STM32Cube13 Firmware Package users. They provide basic functionalities, show main features or demonstrate performance. They are provided with preconfigured projects for the main supported toolchains.
In the STM32CubeMP13 Firmware Package, the projects are organized in a sequential scheme based on the following levels:
- Boards : Hardware platform (discovery boards)
- Project Category:
- Applications
- Examples
- External Loader
- Templates
The exhaustive list of projects is provided in this table: STM32CubeProjectsList.
Update History
Main Changes
Maintenance DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series)
Contents
Projects
The components flagged by “” have changed since the previous release. “” are new.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135F-DK | Examples | Projects/STM32MP135C-DK/Examples | |
| STM32MP135F-DK | Applications | Projects/STM32MP135C-DK/Applications | |
| STM32MP135F-DK | External Loader | Projects/STM32MP135C-DK/External_Loader | |
| STM32MP135F-DK | Templates | Projects/STM32MP135C-DK/Templates |
- LWIP examples are added in applications.
- LWIP example with 2 ETH interface demo in applications.
- Free RTOS examples are added in applications.
- Example added to demonstrate USB host lib capabilities in appllications.
- Source code of External Loader is provided which contains Ext_Memloader supporting SD_Ext_Loader.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP13XX_CUSTOM_HW | Examples | Projects/STM32MP13XX_CUSTOM_HW/Examples | |
| STM32MP13XX_CUSTOM_HW | Applications | Projects/STM32MP13XX_CUSTOM_HW/Applications | |
| STM32MP13XX_CUSTOM_HW | External Loader | Projects/STM32MP13XX_CUSTOM_HW/External_Loader | |
| STM32MP13XX_CUSTOM_HW | Templates | Projects/STM32MP13XX_CUSTOM_HW/Templates |
- Source code of External Loader is provided which contains Ext_Memloader supporting EMMC_Ext_Loader and SNOR_Ext_Loader.
Notes
- STM32MP13XX_CUSTOM_HW is an internal ST Board customized to test some feature not available on STM32MP135F-DK Board : ex FMC-NAND or QSPi NOR or eMMC
- The exhaustive list of projects is provided in this table STM32CubeProjectsList.html
- Execution information :
- Engineering boot mode:
- All the examples could be run on SYSRAM memory, except LTDC_Display_2Layers, DCMIPP, TouchScreen(the binary size of these examples are larger than SYSRAM Size) => For these examples, DDR_Init should be run before.
- For the same reason, all the AzureRTOS applications should be run after DDR_Init example.
- SDCard boot mode:
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied using cube programmer (External_Loader is included in form of
binaries for this purpose) or manually in the SD Card.
- At the boot, the bootrom will copy the FSBLA_SDMMC in SYSRAM and execute it,
- FSBLA_Sdmmc:
- will initialize the clocks, the SDMMC and the DDR,
- will read from SDMMC1 the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied using cube programmer (External_Loader is included in form of
binaries for this purpose) or manually in the SD Card.
- NOR boot mode (not possible on STM32MP135F_DK board because no
QSPI_NOR available, but feature has been validated with internal ST
Board customized - STM32MP13XX_CUSTOM_HW)
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied using CubeProgrammer (External_Loader is included in form of
binaries for this purpose) or with the provided debug tool
“QSPI_NOR_Programmer”.
- At the boot, the bootrom will copy the FSBLA_SNOR in SYSRAM and execute it,
- FSBLA_SNOR:
- will initialize the clocks, the QSPI-NOR and the DDR,
- will read from QSPI-NOR the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied using CubeProgrammer (External_Loader is included in form of
binaries for this purpose) or with the provided debug tool
“QSPI_NOR_Programmer”.
- eMMC boot mode:
- The applications or examples (CubeExample) could be executed from
eMMC(SDMMC2). For the instance, the FSBLA_eMMC and the CubeExample
should be copied using cube programmer(External_Loader is included in
form of binaries for this purpose) in the eMMC.
- At the boot, the bootrom will copy the FSBLA_eMMC in SYSRAM and execute it,
- FSBLA_eMMC:
- will initialize the clocks, the SDMMC2(eMMC) and the DDR,
- will read from eMMC the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
eMMC(SDMMC2). For the instance, the FSBLA_eMMC and the CubeExample
should be copied using cube programmer(External_Loader is included in
form of binaries for this purpose) in the eMMC.
- Engineering boot mode:
Development Toolchains and Compilers
- STM32CubeIDE V1.15.0
- IAR Embedded Workbench for ARM (EWARM): v9.50
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discovery board
Dependencies
- None
Known Limitations
- The projects are not generated with STM32CubeMX tool.
- Some IAR example compile with warnings but run Ok.
- IAR does not have option to connect under reset for st-link probe yet in IAR 9.50.
Backward Compatibility
- Not applicable
Main Changes
Major Maintenance DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series)
Contents
Projects
The components flagged by “” have changed since the previous release. “” are new.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135F-DK | Examples | Projects/STM32MP135C-DK/Examples | |
| STM32MP135F-DK | Applications | Projects/STM32MP135C-DK/Applications | |
| STM32MP135F-DK | External Loader | Projects/STM32MP135C-DK/External_Loader | |
| STM32MP135F-DK | Templates | Projects/STM32MP135C-DK/Templates |
- TouchScreen support BSP examples added for G911 component.
- Cube IDE toolchain GCC 12.3 support added.
- IAR porting on Examples is done, Applications and Templates not yet ported for IAR
- Added support for boot from SD and using SDCard as storage medium at same time in SD_Ext_Loader.
- Example added to demonstrate Cryp SAES shared key feature.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP13XX_CUSTOM_HW | Examples | Projects/STM32MP13XX_CUSTOM_HW/Examples | |
| STM32MP13XX_CUSTOM_HW | Applications | Projects/STM32MP13XX_CUSTOM_HW/Applications | |
| STM32MP13XX_CUSTOM_HW | External Loader | Projects/STM32MP13XX_CUSTOM_HW/External_Loader | |
| STM32MP13XX_CUSTOM_HW | Templates | Projects/STM32MP13XX_CUSTOM_HW/Templates |
- Addition of External Loader for eMMC flash using cube programmer for custom board.
- FSBLA eMMC(FSBLA_Sdmmc2) application added for custom board.
- FileX example added with eMMC support.
Notes
- STM32MP13XX_CUSTOM_HW is an internal ST Board customized to test some feature not available on STM32MP135F-DK Board : ex FMC-NAND or QSPi NOR or eMMC
- The exhaustive list of projects is provided in this table STM32CubeProjectsList.html
- Execution information :
- Engineering boot mode:
- All the examples could be run on SYSRAM memory, except LTDC_Display_2Layers, DCMIPP, TouchScreen(the binary size of these examples are larger than SYSRAM Size) => For these examples, DDR_Init should be run before.
- For the same reason, all the AzureRTOS applications should be run after DDR_Init example.
- SDCard boot mode:
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied using cube programmer (External_Loader is included in form of
binaries for this purpose) or manually in the SD Card.
- At the boot, the bootrom will copy the FSBLA_SDMMC in SYSRAM and execute it,
- FSBLA_Sdmmc:
- will initialize the clocks, the SDMMC and the DDR,
- will read from SDMMC1 the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied using cube programmer (External_Loader is included in form of
binaries for this purpose) or manually in the SD Card.
- NOR boot mode (not possible on STM32MP135F_DK board because no
QSPI_NOR available, but feature has been validated with internal ST
Board customized - STM32MP13XX_CUSTOM_HW)
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied using CubeProgrammer (External_Loader is included in form of
binaries for this purpose) or with the provided debug tool
“QSPI_NOR_Programmer”.
- At the boot, the bootrom will copy the FSBLA_SNOR in SYSRAM and execute it,
- FSBLA_SNOR:
- will initialize the clocks, the QSPI-NOR and the DDR,
- will read from QSPI-NOR the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied using CubeProgrammer (External_Loader is included in form of
binaries for this purpose) or with the provided debug tool
“QSPI_NOR_Programmer”.
- eMMC boot mode:
- The applications or examples (CubeExample) could be executed from
eMMC(SDMMC2). For the instance, the FSBLA_eMMC and the CubeExample
should be copied using cube programmer(External_Loader is included in
form of binaries for this purpose) in the eMMC.
- At the boot, the bootrom will copy the FSBLA_eMMC in SYSRAM and execute it,
- FSBLA_eMMC:
- will initialize the clocks, the SDMMC2(eMMC) and the DDR,
- will read from eMMC the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
eMMC(SDMMC2). For the instance, the FSBLA_eMMC and the CubeExample
should be copied using cube programmer(External_Loader is included in
form of binaries for this purpose) in the eMMC.
- Engineering boot mode:
Development Toolchains and Compilers
- STM32CubeIDE V1.15.0
- IAR Embedded Workbench for ARM (EWARM): v9.50
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discovery board
Dependencies
- None
Known Limitations
- The projects are not generated with STM32CubeMX tool.
- IAR ported examples are not provided for all project and some IAR example compile with warnings but run Ok.
- IAR does not have option to connect under reset for st-link probe yet in IAR 9.50.
Backward Compatibility
- Not applicable
Main Changes
Mass Market DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series)
Contents
Projects
The components flagged by “” have changed since the previous release. “” are new.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135F-DK | Examples | Projects/STM32MP135C-DK/Examples | |
| STM32MP135F-DK | Applications | Projects/STM32MP135C-DK/Applications | |
| STM32MP135F-DK | External Loader | Projects/STM32MP135C-DK/External_Loader | |
| STM32MP135F-DK | Templates | Projects/STM32MP135C-DK/Templates |
- MMU & CACHE has been enabled for all examples, applications and Templates.
- Addition of External Loader for SDCard flash using cube programmer.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP13XX_CUSTOM_HW | Examples | Projects/STM32MP13XX_CUSTOM_HW/Examples | |
| STM32MP13XX_CUSTOM_HW | Applications | Projects/STM32MP13XX_CUSTOM_HW/Applications | |
| STM32MP13XX_CUSTOM_HW | External Loader | Projects/STM32MP13XX_CUSTOM_HW/External_Loader | |
| STM32MP13XX_CUSTOM_HW | Templates | Projects/STM32MP13XX_CUSTOM_HW/Templates |
- Quality related fixes for all examples and applications and addition of External Loader for XSPI flash using cube programmer.
- QSPI dependencies are replaced with XSPI
Notes
- STM32MP13XX_CUSTOM_HW is an internal ST Board customized to test some feature not available on STM32MP135F-DK Board : ex FMC-NAND or QSPi NOR
- The exhaustive list of projects is provided in this table STM32CubeProjectsList.html
- Execution information :
- Engineering boot mode:
- All the examples could be run on SYSRAM memory, except LTDC_Display_2Layers (the binary size of this example is larger than SYSRAM Size) => For this example, DDR_Init should be run before.
- For the same reason, all the AzureRTOS applications should be run after DDR_Init example.
- SDCard boot mode:
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied manually in the SD Card.
- At the boot, the bootrom will copy the FSBLA_SDMMC in SYSRAM and execute it,
- FSBLA_Sdmmc:
- will initialize the clocks, the SDMMC and the DDR,
- will read from SDMMC1 the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied manually in the SD Card.
- NOR boot mode (not possible on STM32MP135F_DK board because no
QSPI_NOR available, but feature has been validated with internal ST
Board customized - STM32MP13XX_CUSTOM_HW)
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied with the debug tool “QSPI_NOR_Programmer”.
- At the boot, the bootrom will copy the FSBLA_SNOR in SYSRAM and execute it,
- FSBLA_SNOR:
- will initialize the clocks, the QSPI-NOR and the DDR,
- will read from QSPI-NOR the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied with the debug tool “QSPI_NOR_Programmer”.
- Engineering boot mode:
Development Toolchains and Compilers
- STM32CubeIDE V1.12.1 (10.3-2021.10)
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discovery board
Dependencies
- None
Known Limitations
- The projects are not generated with STM32CubeMX tool.
- The projects are not yet supported with IAR Embedded Workbench for ARM (EWARM) toolchain.
Backward Compatibility
- Not applicable
Main Changes
5th ALPHA DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series)
Contents
Projects
The components flagged by “” have changed since the previous release. “” are new.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135F-DK | Examples | Projects/STM32MP135C-DK/Examples | |
| STM32MP135F-DK | Applications | Projects/STM32MP135C-DK/Applications | |
| STM32MP135F-DK | Templates | Projects/STM32MP135C-DK/Templates |
- 2 new examples implemented:
- DCMIPP_CaptureMode_A7
- DCMIPP_SnapshotMode_A7
- 3 new application implemented:
- Low_power_LPLV_Stop2
- Low_power_Standby
- Tx_MPU
- MMU & CACHE has been enabled for LTDC, GPIO, ThreadX, USBX, Fx_SRAM_File_Edit_Standalone applications.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP13XX_CUSTOM_HW | Examples | Projects/STM32MP13XX_CUSTOM_HW/Examples | |
| STM32MP13XX_CUSTOM_HW | Applications | Projects/STM32MP13XX_CUSTOM_HW/Applications | |
| STM32MP13XX_CUSTOM_HW | Templates | Projects/STM32MP13XX_CUSTOM_HW/Templates |
- 1 application implemented:
- Fx_Nand_Write_Read_File_Sequencer
Notes
- STM32MP13XX_CUSTOM_HW is an internal ST Board customized to test some feature not available on STM32MP135F-DK Board : ex FMC-NAND or QSPi NOR
- The exhaustive list of projects is provided in this table STM32CubeProjectsList.html
- Execution information :
- Engineering boot mode:
- All the examples could be run on SYSRAM memory, except LTDC_Display_2Layers (the binary size of this example is larger than SYSRAM Size) => For this example, DDR_Init should be run before.
- For the same reason, all the AzureRTOS applications should be run after DDR_Init example.
- SDCard boot mode:
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied manually in the SD Card.
- At the boot, the bootrom will copy the FSBLA_SDMMC in SYSRAM and execute it,
- FSBLA_Sdmmc:
- will initialize the clocks, the SDMMC and the DDR,
- will read from SDMMC1 the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied manually in the SD Card.
- NOR boot mode (not possible on STM32MP135F_DK board because no
QSPI_NOR available, but feature has been validated with internal ST
Board customized - STM32MP13XX_CUSTOM_HW)
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied with the debug tool “QSPI_NOR_Programmer”.
- At the boot, the bootrom will copy the FSBLA_SNOR in SYSRAM and execute it,
- FSBLA_SNOR:
- will initialize the clocks, the QSPI-NOR and the DDR,
- will read from QSPI-NOR the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied with the debug tool “QSPI_NOR_Programmer”.
- Engineering boot mode:
Development Toolchains and Compilers
- STM32CubeIDE V1.12.1 (10.3-2021.10)
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discovery board
Dependencies
- None
Known Limitations
- The projects are not generated with STM32CubeMX tool.
- The projects are not yet supported with IAR Embedded Workbench for ARM (EWARM) toolchain.
Backward Compatibility
- Not applicable
Main Changes
4th ALPHA DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series)
Contents
Projects
The components flagged by “” have changed since the previous release. “” are new.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135F-DK | Examples | Projects/STM32MP135C-DK/Examples | |
| STM32MP135F-DK | Applications | Projects/STM32MP135C-DK/Applications | |
| STM32MP135F-DK | Templates | Projects/STM32MP135C-DK/Templates |
- 6 new examples implemented:
- ETZPC_NonSecure_Access
- MDMA_Mem2MemTransfer
- MDMA_Mem2MemTransfer_Secure
- PKA_ECCDoubleBaseLadder
- PKA_ECDSA_Sign
- USART_SlaveMode_DMA
- 1 new application implemented:
- Nx_Iperf
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP13XX_CUSTOM_HW | Examples | Projects/STM32MP13XX_CUSTOM_HW/Examples | |
| STM32MP13XX_CUSTOM_HW | Applications | Projects/STM32MP13XX_CUSTOM_HW/Applications | |
| STM32MP13XX_CUSTOM_HW | Templates | Projects/STM32MP13XX_CUSTOM_HW/Templates |
- 1 Template implemented
- 1 example implemented:
- DDR_Init to initialize LPDDR3)
- 4 applications implemented:
- QSPI_NOR_PROGRAMMER : This application shows how to load a signed binary to an QSPI-NOR (MX25L51245G).
- FSBLA_SNOR : This application describes how to load a cubeExample binary from QSPI-NOR (MX25L51245G) into DDR (LPDDR3), and execute it.
- Fx_uSD_File_Edit : This application provides an example of Azure RTOS FileX stack usage on board, it shows how to develop a basic SD card file operations application
- Fx_Nand_Write_Read_File : It demonstrates how to create a Fat File system on the NAND flash using FileX alongside LevelX (without ECC). The application is designed to execute file operations on the Micron MT29F8G08ABACAH4
Notes
- STM32MP13XX_CUSTOM_HW is an internal ST Board customized to test some feature not available on STM32MP135F-DK Board : ex FMC-NAND or QSPi NOR
- The exhaustive list of projects is provided in this table STM32CubeProjectsList.html
- Execution information :
- Engineering boot mode:
- All the examples could be run on SYSRAM memory, except LTDC_Display_2Layers (the binary size of this example is larger than SYSRAM Size) => For this example, DDR_Init should be run before.
- For the same reason, all the AzureRTOS applications should be run after DDR_Init example.
- SDCard boot mode:
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied manually in the SD Card.
- At the boot, the bootrom will copy the FSBLA_SDMMC in SYSRAM and execute it,
- FSBLA_Sdmmc:
- will initialize the clocks, the SDMMC and the DDR,
- will read from SDMMC1 the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied manually in the SD Card.
- NOR boot mode (not possible on STM32MP135F_DK board because no
QSPI_NOR available, but feature has been validated with internal ST
Board customized - STM32MP13XX_CUSTOM_HW)
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied with the debug tool “QSPI_NOR_Programmer”.
- At the boot, the bootrom will copy the FSBLA_SNOR in SYSRAM and execute it,
- FSBLA_SNOR:
- will initialize the clocks, the QSPI-NOR and the DDR,
- will read from QSPI-NOR the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
NOR. For the instance, the FSBLA_SNOR and the CubeExample could be
copied with the debug tool “QSPI_NOR_Programmer”.
- Engineering boot mode:
Development Toolchains and Compilers
- STM32CubeIDE V1.11.0 (10.3-2021.10)
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discovery board
Dependencies
- None
Known Limitations
- The projects are not generated with STM32CubeMX tool.
- The projects are not yet supported with IAR Embedded Workbench for ARM (EWARM) toolchain.
Backward Compatibility
- Not applicable
Main Changes
3rd ALPHA DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series)
Contents
Projects
The components flagged by “” have changed since the previous release. “” are new.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135F-DK | Examples | V0.5.0 | Projects/STM32MP135C-DK/Examples |
| STM32MP135F-DK | Applications | V0.5.0 | Projects/STM32MP135C-DK/Applications |
| STM32MP135F-DK | Templates | V0.5.0 | Projects/STM32MP135C-DK/Templates |
- New example “ADC_MultiChannelSingleConversion” implemented
- Implement AzureRTOS applications:
- FileX
- ThreadX
- USBX
- NetXDUO
- Implement FSBLA_SDMMC application (to load and execute a cubeExample binary from SDCARD into DDR on STM32MP135F-DK (DDR3).)
Notes
- The exhaustive list of projects is provided in this table STM32CubeProjectsList.html
- Execution information :
- Engineering boot mode:
- All the examples could be run on SYSRAM memory, except LTDC_Display_2Layers (the binary size of this example is larger than SYSRAM Size) => For this example, DDR_Init should be run before.
- For the same reason, all the AzureRTOS applications should be run after DDR_Init example.
- SDCard boot mode:
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied manually in the SD Card.
- At the boot, the bootrom will copy the FSBLA_SDMMC in SYSRAM and execute it,
- FSBLA_Sdmmc:
- will initialize the clocks, the SDMMC and the DDR,
- will read from SDMMC1 the CubeExample image length and load CubeExample into DDR.
- will jump into DDR to execute this CubeExample
- The applications or examples (CubeExample) could be executed from
SDCard. For the instance, the FSBLA_Sdmmc and the CubeExample should be
copied manually in the SD Card.
- Engineering boot mode:
Development Toolchains and Compilers
- STM32CubeIDE V1.10.0 (10.3-2021.10)
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discovery board
Dependencies
- This software is compatible with STM32CubeIDE v1.10.0 version ( compilation issue with version < v1.10.0)
Known Limitations
- NetXduo applications not yet at ALPHA Level: these limitations will
be fixed in future releases.
- The NetXduo applications lead to potential instabilities and performance issues.
- LED management for status to update
- The projects are not generated with STM32CubeMX tool.
- The projects are not yet supported with IAR Embedded Workbench for ARM (EWARM) toolchain.
Backward Compatibility
- Not applicable
Main Changes
2nd ALPHA DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series) updated for silicon
Contents
Projects
The components flagged by “” have changed since the previous release. “” are new.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135F-DK | Examples | V0.4.0 | Projects/STM32MP135C-DK/Examples |
| STM32MP135F-DK | Applications | V0.4.0 | Projects/STM32MP135C-DK/Applications |
| STM32MP135F-DK | Templates | V0.4.0 | Projects/STM32MP135C-DK/Templates |
- New example “CRYP_SAES_MDMA_ECB_CBC” implemented
- Other examples reworked
Notes
- The exhaustive list of projects is provided in this table STM32CubeProjectsList.html
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discovery board
Dependencies
- None
Known Limitations
- None
Backward Compatibility
- Not applicable
Main Changes
ALPHA DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series) updated for silicon
Contents
Projects
The components flagged by “” have changed since the previous release. “” are new.
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135F-DK | Examples | V0.3.0 | Projects/STM32MP135C-DK/Examples |
| STM32MP135F-DK | Applications | V0.3.0 | Projects/STM32MP135C-DK/Applications |
| STM32MP135F-DK | Templates | V0.3.0 | Projects/STM32MP135C-DK/Templates |
Notes
- The exhaustive list of projects is provided in this table STM32CubeProjectsList.html
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discovery board
Dependencies
- None
Known Limitations
- None
Backward Compatibility
- Not applicable
Main Changes
PRE-ALPHA DV of STM32CubeMP13 Projects (STM32Cube for STM32MP13 Series) updated for silicon
Contents
Projects
| Board | Project category | Version | Path |
|---|---|---|---|
| STM32MP135C-DK | Templates | V0.2.0 | Projects/STM32MP135C-DK/Templates |
Supported Devices and boards
- STM32MP131 / STM32MP133 and STM32MP135 devices
- STM32MP135F Discover board
Dependencies
- None
Known Limitations
- None
Backward Compatibility
- Not applicable