pair_style gauss command¶
pair_style gauss/gpu command¶
pair_style gauss/omp command¶
pair_style gauss/cut command¶
pair_style gauss/cut/omp command¶
Syntax¶
pair_style gauss cutoff
pair_style gauss/cut cutoff
- cutoff = global cutoff for Gauss interactions (distance units)
Examples¶
pair_style gauss 12.0
pair_coeff * * 1.0 0.9
pair_coeff 1 4 1.0 0.9 10.0
pair_style gauss/cut 3.5
pair_coeff 1 4 0.2805 1.45 0.112
Description¶
Style gauss computes a tethering potential of the form
![_images/pair_gauss.jpg](_images/pair_gauss.jpg)
between an atom and its corresponding tether site which will typically be a frozen atom in the simulation. Rc is the cutoff.
The following coefficients must be defined for each pair of atom types via the pair_coeff command as in the examples above, or in the data file or restart files read by the read_data or read_restart commands:
- A (energy units)
- B (1/distance^2 units)
- cutoff (distance units)
The last coefficient is optional. If not specified, the global cutoff is used.
Style gauss/cut computes a generalized Gaussian interaction potential between pairs of particles:
![_images/pair_gauss_cut.jpg](_images/pair_gauss_cut.jpg)
where H determines together with the standard deviation sigma_h the peak height of the Gaussian function, and r_mh the peak position. Examples of the use of the Gaussian potentials include implicit solvent simulations of salt ions (Lenart) and of surfactants (Jusufi). In these instances the Gaussian potential mimics the hydration barrier between a pair of particles. The hydration barrier is located at r_mh and has a width of sigma_h. The prefactor determines the hight of the potential barrier.
The following coefficients must be defined for each pair of atom types via the pair_coeff command as in the example above, or in the data file or restart files read by the read_data or read_restart commands:
- H (energy * distance units)
- r_mh (distance units)
- sigma_h (distance units)
The global cutoff (r_c) specified in the pair_style command is used.
Styles with a cuda, gpu, intel, kk, omp, or opt suffix are functionally the same as the corresponding style without the suffix. They have been optimized to run faster, depending on your available hardware, as discussed in Section_accelerate of the manual. The accelerated styles take the same arguments and should produce the same results, except for round-off and precision issues.
These accelerated styles are part of the USER-CUDA, GPU, USER-INTEL, KOKKOS, USER-OMP and OPT packages, respectively. They are only enabled if LAMMPS was built with those packages. See the Making LAMMPS section for more info.
You can specify the accelerated styles explicitly in your input script by including their suffix, or you can use the “-suffix command-line switch7_Section_start.html#start_6 when you invoke LAMMPS, or you can use the suffix command in your input script.
See Section_accelerate of the manual for more instructions on how to use the accelerated styles effectively.
Mixing, shift, table, tail correction, restart, rRESPA info:
These pair styles do not support mixing. Thus, coefficients for all I,J pairs must be specified explicitly.
The gauss style does not support the pair_modify shift option. There is no effect due to the Gaussian well beyond the cutoff; hence reasonable cutoffs need to be specified.
The gauss/cut style supports the pair_modify shift option for the energy of the Gauss-potential portion of the pair interaction.
The pair_modify table and tail options are not relevant for these pair styles.
These pair styles write their information to binary restart files, so pair_style and pair_coeff commands do not need to be specified in an input script that reads a restart file.
These pair styles can only be used via the pair keyword of the run_style respa command. They do not support the inner, middle, outer keywords.
The gauss pair style tallies an “occupancy” count of how many Gaussian-well sites have an atom within the distance at which the force is a maximum = sqrt(0.5/b). This quantity can be accessed via the compute pair command as a vector of values of length 1.
To print this quantity to the log file (with a descriptive column heading) the following commands could be included in an input script:
compute gauss all pair gauss
variable occ equal c_gauss[1]
thermo_style custom step temp epair v_occ
Restrictions¶
The gauss/cut style is part of the “user-misc” package. It is only enabled if LAMMPS is build with that package. See the Making of LAMMPS section for more info.