limitForce values = 'on' or 'off'
    on = ensures that the normal force is never attractive (an artefact that can occur at the end of a collision).
    off = standard implementation that might lead to attractive forces.
  tangential_damping values = 'on' or 'off'
    on = activates tangential damping
    off = no tangential damping 
  heating_normal_hertz values = 'on' or 'off'
    on = model contributes to surface heating in the frame of surface sphere/heatable
    off = model does not contributes to surface heating 

Description:

This granular model uses the following formula for the frictional force between two granular particles, when the distance r between two particles of radii Ri and Rj is less than their contact distance d = Ri + Rj. There is no force between the particles when r > d:

In the first term is the normal force between the two particles and the second term is the tangential force. The normal force has 2 terms, a spring force and a damping force. The tangential force also has 2 terms: a shear force and a damping force. The shear force is a "history" effect that accounts for the tangential displacement ("tangential overlap") between the particles for the duration of the time they are in contact. This term is controlled by the tangential model in action Keyword tangential_damping can be used to eliminate the second part of the force in tangential direction. The way how the Coulomb friction limit acts is also controlled by the tangential model chosen by the user.

The quantities in the equations are as follows:

• delta_n = d - r = overlap distance of 2 particles
• k_n = elastic constant for normal contact
• k_t = elastic constant for tangential contact
• gamma_n = viscoelastic damping constant for normal contact
• gamma_t = viscoelastic damping constant for tangential contact
• delta_t = tangential displacement vector between 2 spherical particles which is truncated to satisfy a frictional yield criterion
• rmu = coefficient of rolling friction
• contactradius = contact radius, equal to particle radius - 0.5 * delta_n
• v_n = normal component of the relative velocity of the 2 particles
• v_t = tangential component of the relative velocity of the 2 particles
• w_r = relative rotational velocity of the 2 particles

The Kn, Kt, gamma_n, and gamma_t coefficients are calculated as follows from the material properties:

To define those material properties, it is mandatory to use multiple fix property/global commands:

fix id all property/global youngsModulus peratomtype value_1 value_2 ...
    (value_i=value for Youngs Modulus of atom type i)
fix id all property/global poissonsRatio peratomtype value_1 value_2 ...
    (value_i=value for Poisson ratio of atom type i)
fix id all property/global coefficientRestitution peratomtypepair n_atomtypes value_11 value_12 .. value_21 value_22 .. .
    (value_ij=value for the coefficient of restitution between atom type i and j; n_atomtypes is the number of atom types you want to use in your simulation)
fix id all property/global coefficientFriction peratomtypepair n_atomtypes value_11 value_12 .. value_21 value_22 .. .
    (value_ij=value for the (static) coefficient of friction between atom type i and j; n_atomtypes is the number of atom types you want to use in your simulation) 

IMPORTANT NOTE: You have to use atom styles beginning from 1, e.g. 1,2,3,...

This model contributes to surface heating in the frame of surface sphere/heatable if the appropriate flag is activated

Force Limiting:

Note, that not using limitForce might lead to attractive forces between particles and walls, especially in case the coefficient of restitution is small. Be sure you include this key word for the pair style and the wall model if you like to avoid this.

Restrictions:

If using SI units, youngsModulus must be > 5e6 If using CGS units, youngsModulus must be > 5e5 When using the limitForce, the specified coefficient of restitution is only approximate. This might become problematic for low coefficients of resitution as showin in Schwager and Poschel.

Default:

tangential_damping = 'on' limitForce = 'off' heating_normal_hertz = 'off'

(Di Renzo) Alberto Di Renzo, Francesco Paolo Di Maio, Chemical Engineering Science, 59 (3), p 525–541 (2004).

(Ai) Jun Ai, Jian-Fei Chen, J. Michael Rotter, Jin Y. Ooi, Powder Technology, 206 (3), p 269-282 (2011).

(Brilliantov) Brilliantov, Spahn, Hertzsch, Poschel, Phys Rev E, 53, p 5382-5392 (1996). (Schwager) Schwager, Poschel, Gran Matt, 9, p 465-469 (2007).

(Silbert) Silbert, Ertas, Grest, Halsey, Levine, Plimpton, Phys Rev E, 64, p 051302 (2001).

(Zhang) Zhang and Makse, Phys Rev E, 72, p 011301 (2005).