guide_keras.Rmd
Keras is a high-level API to build and train deep learning models. It’s used for fast prototyping, advanced research, and production, with three key advantages:
In Keras, you assemble layers to build models. A model is (usually) a graph of layers. The most common type of model is a stack of layers: the sequential
model.
To build a simple, fully-connected network (i.e., a multi-layer perceptron):
model <- keras_model_sequential()
model %>%
# Adds a densely-connected layer with 64 units to the model:
layer_dense(units = 64, activation = 'relu') %>%
# Add another:
layer_dense(units = 64, activation = 'relu') %>%
# Add a softmax layer with 10 output units:
layer_dense(units = 10, activation = 'softmax')
There are many layers
available with some common constructor parameters:
activation
: Set the activation function for the layer. By default, no activation is applied.kernel_initializer
and bias_initializer
: The initialization schemes that create the layer’s weights (kernel and bias). This defaults to the Glorot uniform
initializer.kernel_regularizer
and bias_regularizer
: The regularization schemes that apply to the layer’s weights (kernel and bias), such as L1 or L2 regularization. By default, no regularization is applied.The following instantiates dense
layers using constructor arguments:
# Create a sigmoid layer:
layer_dense(units = 64, activation ='sigmoid')
# A linear layer with L1 regularization of factor 0.01 applied to the kernel matrix:
layer_dense(units = 64, kernel_regularizer = regularizer_l1(0.01))
# A linear layer with L2 regularization of factor 0.01 applied to the bias vector:
layer_dense(units = 64, bias_regularizer = regularizer_l2(0.01))
# A linear layer with a kernel initialized to a random orthogonal matrix:
layer_dense(units = 64, kernel_initializer = 'orthogonal')
# A linear layer with a bias vector initialized to 2.0:
layer_dense(units = 64, bias_initializer = initializer_constant(2.0))
After the model is constructed, configure its learning process by calling the compile
method:
model %>% compile(
optimizer = 'adam',
loss = 'categorical_crossentropy',
metrics = list('accuracy')
)
compile
takes three important arguments:
optimizer
: This object specifies the training procedure. Commonly used optimizers are e.g.adam
, rmsprop
, or sgd
.loss
: The function to minimize during optimization. Common choices include mean square error (mse
), categorical_crossentropy
, and binary_crossentropy
.metrics
: Used to monitor training. In classification, this usually is accuracy.The following shows a few examples of configuring a model for training:
# Configure a model for mean-squared error regression.
model %>% compile(
optimizer = 'adam',
loss = 'mse', # mean squared error
metrics = list('mae') # mean absolute error
)
# Configure a model for categorical classification.
model %>% compile(
optimizer = optimizer_rmsprop(lr = 0.01),
loss = "categorical_crossentropy",
metrics = list("categorical_accuracy")
)
You can train keras models directly on R matrices and arrays (possibly created from R data.frames
). A model is fit to the training data using the fit
method:
data <- matrix(rnorm(1000 * 32), nrow = 1000, ncol = 32)
labels <- matrix(rnorm(1000 * 10), nrow = 1000, ncol = 10)
model %>% fit(
data,
labels,
epochs = 10,
batch_size = 32
)
fit
takes three important arguments:
epochs
: Training is structured into epochs. An epoch is one iteration over the entire input data (this is done in smaller batches).batch_size
: When passed matrix or array data, the model slices the data into smaller batches and iterates over these batches during training. This integer specifies the size of each batch. Be aware that the last batch may be smaller if the total number of samples is not divisible by the batch size.validation_data
: When prototyping a model, you want to easily monitor its performance on some validation data. Passing this argument — a list of inputs and labels — allows the model to display the loss and metrics in inference mode for the passed data, at the end of each epoch.Here’s an example using validation_data
:
data <- matrix(rnorm(1000 * 32), nrow = 1000, ncol = 32)
labels <- matrix(rnorm(1000 * 10), nrow = 1000, ncol = 10)
val_data <- matrix(rnorm(1000 * 32), nrow = 100, ncol = 32)
val_labels <- matrix(rnorm(100 * 10), nrow = 100, ncol = 10)
model %>% fit(
data,
labels,
epochs = 10,
batch_size = 32,
validation_data = list(val_data, val_labels)
)
Same as fit
, the evaluate
and predict
methods can use raw R data as well as a dataset
.
To evaluate the inference-mode loss and metrics for the data provided:
model %>% evaluate(test_data, test_labels, batch_size = 32)
model %>% evaluate(test_dataset, steps = 30)
And to predict the output of the last layer in inference for the data provided, again as R data as well as a dataset
:
The sequential
model is a simple stack of layers that cannot represent arbitrary models. Use the Keras functional API to build complex model topologies such as:
Building a model with the functional API works like this:
keras_model
instance.sequential
model.The following example uses the functional API to build a simple, fully-connected network:
inputs <- layer_input(shape = (32)) # Returns a placeholder tensor
predictions <- inputs %>%
layer_dense(units = 64, activation = 'relu') %>%
layer_dense(units = 64, activation = 'relu') %>%
layer_dense(units = 10, activation = 'softmax')
# Instantiate the model given inputs and outputs.
model <- keras_model(inputs = inputs, outputs = predictions)
# The compile step specifies the training configuration.
model %>% compile(
optimizer = optimizer_rmsprop(lr = 0.001),
loss = 'categorical_crossentropy',
metrics = list('accuracy')
)
# Trains for 5 epochs
model %>% fit(
data,
labels,
batch_size = 32,
epochs = 5
)
To create a custom Keras layer, you create an R6 class derived from KerasLayer
. There are three methods to implement (only one of which, call()
, is required for all types of layer):
build(input_shape)
: This is where you will define your weights. Note that if your layer doesn’t define trainable weights then you need not implement this method.call(x)
: This is where the layer’s logic lives. Unless you want your layer to support masking, you only have to care about the first argument passed to call: the input tensor.compute_output_shape(input_shape)
: In case your layer modifies the shape of its input, you should specify here the shape transformation logic. This allows Keras to do automatic shape inference. If you don’t modify the shape of the input then you need not implement this method.Here is an example custom layer that performs a matrix multiplication:
library(keras)
CustomLayer <- R6::R6Class("CustomLayer",
inherit = KerasLayer,
public = list(
output_dim = NULL,
kernel = NULL,
initialize = function(output_dim) {
self$output_dim <- output_dim
},
build = function(input_shape) {
self$kernel <- self$add_weight(
name = 'kernel',
shape = list(input_shape[[2]], self$output_dim),
initializer = initializer_random_normal(),
trainable = TRUE
)
},
call = function(x, mask = NULL) {
k_dot(x, self$kernel)
},
compute_output_shape = function(input_shape) {
list(input_shape[[1]], self$output_dim)
}
)
)
In order to use the custom layer within a Keras model you also need to create a wrapper function which instantiates the layer using the create_layer()
function. For example:
# define layer wrapper function
layer_custom <- function(object, output_dim, name = NULL, trainable = TRUE) {
create_layer(CustomLayer, object, list(
output_dim = as.integer(output_dim),
name = name,
trainable = trainable
))
}
You can now use the layer in a model as usual:
In addition to creating custom layers, you can also create a custom model. This might be necessary if you wanted to use TensorFlow eager execution in combination with an imperatively written forward pass.
In cases where this is not needed, but flexibility in building the architecture is required, it is recommended to just stick with the functional API.
A custom model is defined by calling keras_model_custom()
passing a function that specifies the layers to be created and the operations to be executed on forward pass.
my_model <- function(input_dim, output_dim, name = NULL) {
# define and return a custom model
keras_model_custom(name = name, function(self) {
# create layers we'll need for the call (this code executes once)
# note: the layers have to be created on the self object!
self$dense1 <- layer_dense(units = 64, activation = 'relu', input_shape = input_dim)
self$dense2 <- layer_dense(units = 64, activation = 'relu')
self$dense3 <- layer_dense(units = 10, activation = 'softmax')
# implement call (this code executes during training & inference)
function(inputs, mask = NULL) {
x <- inputs %>%
self$dense1() %>%
self$dense2() %>%
self$dense3()
x
}
})
}
model <- my_model(input_dim = 32, output_dim = 10)
model %>% compile(
optimizer = optimizer_rmsprop(lr = 0.001),
loss = 'categorical_crossentropy',
metrics = list('accuracy')
)
# Trains for 5 epochs
model %>% fit(
data,
labels,
batch_size = 32,
epochs = 5
)
A callback is an object passed to a model to customize and extend its behavior during training. You can write your own custom callback, or use the built-in callbacks
that include:
callback_model_checkpoint
: Save checkpoints of your model at regular intervals.callback_learning_rate_scheduler
: Dynamically change the learning rate.callback_early_stopping
: Interrupt training when validation performance has stopped improving.callbacks_tensorboard
: Monitor the model’s behavior using TensorBoard.To use a callback
, pass it to the model’s fit
method:
Save and load the weights of a model using save_model_weights_hdf5
and load_model_weights_hdf5
, respectively:
A model’s configuration can be saved - this serializes the model architecture without any weights. A saved configuration can recreate and initialize the same model, even without the code that defined the original model. Keras supports JSON and YAML serialization formats:
# Serialize a model to JSON format
json_string <- model %>% model_to_json()
# Recreate the model (freshly initialized)
fresh_model <- model_from_json(json_string)
# Serializes a model to YAML format
yaml_string <- model %>% model_to_yaml()
# Recreate the model
fresh_model <- model_from_yaml(yaml_string)
Caution: Custom models are not serializable because their architecture is defined by the R code in the function passed to keras_model_custom
.
Eager execution is an imperative programming environment that evaluates operations immediately. This is not required for Keras, but is supported by the TensorFlow backend and useful for inspecting your program and debugging.
To use eager execution from R, you need to tell Keras to use the TensorFlow implementation of Keras (as opposed to native Keras):
When using the TensorFlow implementation, all model-building APIs are compatible with eager execution.
The Estimators API is used for training models for distributed environments. This targets industry use cases such as distributed training on large datasets that can export a model for production.
To use tfestimators
, you need to install separately:
A model
can be trained with the tfestimators
API by converting the model to an estimator
object with keras_model_to_estimator
. Note: As of today this only works with the TensorFlow implementation of Keras.
library(keras)
use_implementation("tensorflow")
library(tfestimators)
estimator <- keras_model_to_estimator(model)
Note: You can enable eager execution for debugging estimator input functions and inspecting data.