In my last post I explained how to control the brightness of multiple light emitting diodes connected to an Arduino with an interface scripted in Processing. The script which I created was great because it just took a series of values sent via USB and lit the LED’s appropriately. This is convenient because it is not specific to any input which might be needed to control the lights. The script to send a value serially along with an indicator character can be added to any Processing script. Naturally one of the first things I had to do with it was create an audio visualizer. With the Arduino programmed as it was all I had to do was use a sound library to break an audio input into frequency bands and send the values down.
The circuit is pretty straight forward. Six LED’s are connected through resistors to the six pins which support PWM (3, 6, 5, 9, 10, 11) and to a ground pin. I have everything crammed onto a tiny breadboard on my proto-sheild cause it’s cute and self contained. That’s just my style. PWM stands for Pulse Width Modulation and is the a way to control the brightness of LED’s as well as some other components. It is a digital output and produces the effect by switching on and off very quickly. The result can be visualized as a square wave. When you send a higher value to a PWM pin it will spend more time on than off. This blinking is faster than we can see so the LED appears to be changing brightness according to the amount of time it spends in the on position.
